Testing non-auto built docker containers (i.e. custom built compilers)
is a bit fiddly as you couldn't continue a build with a previously
locally built container. While you can play games with REGISTRY its
simpler to allow a NOFETCH that will go through the cached build
process when you run the tests.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241023113406.1284676-3-alex.bennee@linaro.org>
GCC produces invalid code for microblaze atomics.
The fix is unfortunately not upstream, so fetch it from an external
location and apply it locally.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240919152308.10440-1-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241023113406.1284676-2-alex.bennee@linaro.org>
Fix coding style issues from checkpatch.pl
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Currently, the default fmc_model was "sst25vf032b" whose size was 4MB for
ast1030-a1 EVB. However, according to the schematic of ast1030-a1 EVB,
ASPEED shipped default flash of fmc_cs0 and fmc_cs1 were "w25q80bl" and
"w25q256", respectively. The size of w25q80bl is 1MB and the size of w25q256
is 32MB.
The fmc_cs0 was connected to AST1030 A1 internal flash and the fmc_cs1 was
connected to external flash. The internal flash could not be changed because
it was placed into AST1030 A1 chip. Users only can change fmc_cs1 external
flash.
So far, only supports to set the default fmc_model for all chip select pins.
In other words, users cannot set the different default flash model for
fmc_cs0 and fmc_cs1, respectively.
Correct fmc_model default flash to w25q80bl the same as AST1030 A1
internal flash for ast1030-a1 EVB.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Currently, the default spi_model was "sst25vf032b" whose size was 4MB for
ast1030-a1 EVB. However, according to the schematic of ast1030-a1 EVB,
ASPEED shipped default flash of spi1 and spi2 were w25q256 whose size
was 32MB.
Correct spi_model default flash to w25q256 for ast1030-a1 EVB.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the w25q01jv datasheet at page 16, it is required to set QE bit
in "Status Register 2" to enable quad mode.
Currently, m25p80 support users utilize "Write Status Register 1(0x01)" command
to set QE bit in "Status Register 2" and utilize "Read Status Register 2(0x35)"
command to get the QE bit status.
However, some firmware directly utilize "Status Register 2(0x31)" command to
set QE bit. To fully support quad mode for w25q01jvq, adds WRSR2 command.
Update collecting data needed 1 byte for WRSR2 command in decode_new_cmd
function and verify QE bit at the first byte of collecting data bit 2 in
complete_collecting_data.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the design of ASPEED SPI controllers user mode, users write the
data to flash, the SPI drivers set the Control Register(0x10) bit 0 and 1
enter user mode. Then, SPI drivers send flash commands for writing data.
Finally, SPI drivers set the Control Register (0x10) bit 2 to stop
active control and restore bit 0 and 1.
According to the design of ASPEED SMC model, firmware writes the
Control Register and the "aspeed_smc_flash_update_ctrl" function is called.
Then, this function verify Control Register(0x10) bit 0 and 1. If it set user
mode, the value of s->snoop_index is SNOOP_START else SNOOP_OFF.
If s->snoop_index is SNOOP_START, the "aspeed_smc_do_snoop" function verify
the first incomming data is a new flash command and writes the corresponding
dummy bytes if need.
However, it did not check the current unselect status. If current unselect
status is "false" and firmware set the IO MODE by Control Register bit 31:28,
the value of s->snoop_index will be changed to SNOOP_START again and
"aspeed_smc_do_snoop" misunderstand that the incomming data is the new flash
command and it causes writing unexpected data into flash.
Example:
1. Firmware set user mode by Control Register bit 0 and 1(0x03)
2. SMC model set s->snoop SNOOP_START
3. Firmware set Quad Page Program with 4-Byte Address command (0x34)
4. SMC model verify this flash command and it needs 4 dummy bytes.
5. Firmware send 4 bytes address.
6. SMC model receives 4 bytes address
7. Firmware set QPI IO MODE by Control Register bit 31. (0x80000003)
8. SMC model verify new user mode by Control Register bit 0 and 1.
Then, set s->snoop SNOOP_START again. (It is the wrong behavior.)
9. Firmware send 0xebd8c134 data and it should be written into flash.
However, SMC model misunderstand that the first incoming data, 0x34,
is the new command because the value of s->snoop is changed to SNOOP_START.
Finally, SMC sned the incorrect data to flash model.
Introduce a new unselect attribute in AspeedSMCState to save the current
unselect status for user mode and set it "true" by default.
Update "aspeed_smc_flash_update_ctrl" function to check the previous unselect
status. If both new unselect status and previous unselect status is different,
update s->snoop_index value and call "aspeed_smc_flash_do_select".
Increase VMStateDescription version.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[ clg: - Replaced VMSTATE_BOOL -> VMSTATE_BOOL_V ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This is a simple conversion of the tests with some cleanups and
adjustments to match the new test framework. Replace the zephyr image
MD5 hashes with SHA256 hashes while at it.
The SDK tests depend on a ssh class from avocado.utils which is
difficult to replace. To be addressed separately.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Make the Aspeed HACE module use the new qcrypto accumulative hashing functions
when in scatter-gather accumulative mode. A hash context will maintain a
"running-hash" as each scatter-gather chunk is received.
Previously each scatter-gather "chunk" was cached
so the hash could be computed once the final chunk was received.
However, the cache was a shallow copy, so once the guest overwrote the
memory provided to HACE the final hash would not be correct.
Possibly related to: https://gitlab.com/qemu-project/qemu/-/issues/1121
Buglink: https://github.com/openbmc/qemu/issues/36
Signed-off-by: Alejandro Zeise <alejandro.zeise@seagate.com>
[ clg: - Checkpatch fixes
- Reworked qcrypto_hash*() error reports in do_hash_operation() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Add GPIO test cases to test output and input pins from A0 to D7 for AST2700.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[ clg: - Updated MAINTAINERS ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add GPIO model for AST2700 GPIO support. The GPIO controller registers base
address is start at 0x14C0_B000 and its address space is 0x1000.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
The register set of GPIO have a significant change since AST2700.
Each GPIO pin has their own individual control register and users are able to
set one GPIO pin’s direction, interrupt enable, input mask and so on in the
same one control register.
AST2700 does not have GPIO18_XXX registers for GPIO 1.8v, removes
ASPEED_DEV_GPIO_1_8V. It is enough to only have ASPEED_DEV_GPIO
device in AST2700.
The AST2700 GPIO controller interrupt is connected to GICINT130_INTC at
bit 18. Therefore, correct GPIO irq 130.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
AST2700 integrates two set of Parallel GPIO Controller with maximum 212
control pins, which are 27 groups. (H, exclude pin: H7 H6 H5 H4)
In the previous design of ASPEED SOCs, one register is used for setting
one function for one set which are 32 pins and 4 groups.
ex: GPIO000 is used for setting data value for GPIO A, B, C and D in AST2600.
ex: GPIO004 is used for setting direction for GPIO A, B, C and D in AST2600.
However, the register set have a significant change since AST2700.
Each GPIO pin has their own individual control register.
In other words, users are able to set one GPIO pin’s direction,
interrupt enable, input mask and so on in the same one register.
Currently, aspeed_gpio_read and aspeed_gpio_write callback functions
are not compatible AST2700.
Introduce new aspeed_gpio_2700_read and aspeed_gpio_2700_write callback
functions and aspeed_gpio_2700_ops memory region operation for AST2700.
Introduce a new ast2700 class to support AST2700.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
The interrupt status field is W1C, where a set bit on read indicates an
interrupt is pending. If the bit extracted from data is set it should
clear the corresponding bit in reg_value. However, if the extracted
bit is clear then the value of the corresponding bit in reg_value
should be unchanged.
SHARED_FIELD_EX32() extracts the interrupt status bit from the write
(data). reg_value is set to the set's interrupt status, which means
that for any pin with an interrupt pending, the corresponding bit is
set. The deposit32() call updates the bit at pin_idx in the
reg_value, using the value extracted from the write (data).
The result is that if multiple interrupt status bits
were pending and the write was acknowledging specific one bit,
then the all interrupt status bits will be cleared.
However, it is index mode and should only clear the corresponding bit.
For example, say we have an interrupt pending for GPIOA0, where the
following statements are true:
set->int_status == 0b01
s->pending == 1
Before it is acknowledged, an interrupt becomes pending for GPIOA1:
set->int_status == 0b11
s->pending == 2
A write is issued to acknowledge the interrupt for GPIOA0. This causes
the following sequence:
reg_value == 0b11
pending == 2
s->pending == 0
set->int_status == 0b00
It should only clear bit 0 in index mode and the correct result
should be as following.
set->int_status == 0b11
s->pending == 2
pending == 1
s->pending == 1
set->int_status == 0b10
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Suggested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
It set "aspeed_gpio_ops" struct which containing read and write callbacks
to be used when I/O is performed on the GPIO region.
Besides, in the previous design of ASPEED SOCs, one register is used for
setting one function for 32 GPIO pins.
ex: GPIO000 is used for setting data value for GPIO A, B, C and D in AST2600.
ex: GPIO004 is used for setting direction for GPIO A, B, C and D in AST2600.
However, the register set have a significant change in AST2700.
Each GPIO pin has their own control register. In other words, users are able to
set one GPIO pin’s direction, interrupt enable, input mask and so on
in one register. The aspeed_gpio_read/aspeed_gpio_write callback functions
are not compatible AST2700.
Introduce a new "const MemoryRegionOps *" attribute in AspeedGPIOClass and
use it in aspeed_gpio_realize function.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs, a GPIO controller owns 4KB of
register space for AST2700, AST2500, AST2400 and AST1030; owns 2KB of
register space for AST2600 1.8v and owns 2KB of register space for
AST2600 3.3v.
It set the memory region size 2KB by default and it does not compatible
register space for AST2700.
Introduce a new class attribute to set the GPIO controller memory size
for different ASPEED SOCs.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Thanks to work by Peter Xu, support is introduced in Linux v6.12 to
allow pfnmap insertions at PMD and PUD levels of the page table. This
means that provided a properly aligned mmap, the vfio driver is able
to map MMIO at significantly larger intervals than PAGE_SIZE. For
example on x86_64 (the only architecture currently supporting huge
pfnmaps for PUD), rather than 4KiB mappings, we can map device MMIO
using 2MiB and even 1GiB page table entries.
Typically mmap will already provide PMD aligned mappings, so devices
with moderately sized MMIO ranges, even GPUs with standard 256MiB BARs,
will already take advantage of this support. However in order to better
support devices exposing multi-GiB MMIO, such as 3D accelerators or GPUs
with resizable BARs enabled, we need to manually align the mmap.
There doesn't seem to be a way for userspace to easily learn about PMD
and PUD mapping level sizes, therefore this takes the simple approach
to align the mapping to the power-of-two size of the region, up to 1GiB,
which is currently the maximum alignment we care about.
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Move error handling code to the end of the function so that it can more
easily be shared by new mmap failure conditions. No functional change
intended.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Data sizes in VFIO migration trace events are printed in hex format
while in migration core trace events they are printed in decimal format.
This inconsistency makes it less readable when using both trace event
types. Hence, change the data sizes print format to decimal in VFIO
migration trace events.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
vfio_state_pending_exact() is used to update migration core how much
device data is left for the device migration. Currently, the sum of
pre-copy and stop-copy sizes of the VFIO device are reported.
The pre-copy size is obtained via the VFIO_MIG_GET_PRECOPY_INFO ioctl,
which returns the amount of device data available to be transferred
while the device is in the PRE_COPY states.
The stop-copy size is obtained via the VFIO_DEVICE_FEATURE_MIG_DATA_SIZE
ioctl, which returns the total amount of device data left to be
transferred in order to complete the device migration.
According to the above, current implementation is wrong -- it reports
extra overlapping data because pre-copy size is already contained in
stop-copy size. Fix it by reporting only stop-copy size.
Fixes: eda7362af9 ("vfio/migration: Add VFIO migration pre-copy support")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
This update includes the full boot order support feature from Jared Rossi
and the TEXTREL fix from Jens Remus.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some packaging tools want to override `LDFLAGS` when building QEMU, this will
result in a build error as most likely no `-nostdlib` flag is passed. Introduce
`EXTRA_LDFLAGS` so that the packager can override `LDFLAGS` without breaking the
build.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-ID: <20241001153618.17791-4-mhartmay@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Drop the hunk to netbook.mak which is not necessary anymore]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 7cd50cbe4c ("pc-bios/s390-ccw: Don't use __bss_start with the
"larl" instruction") introduced the address constant bss_start_literal
for __bss_start in the .text section, which introduced a relocation in
code (i.e. TEXTREL). The dedicated constant is required, as __bss_start
may not necessarily be aligned on a 2-byte boundary (see subject commit
for details).
Move the constant to the .data section to get rid of the relocation in
the .text section. Add the linker option -z text to prevent TEXTRELs to
get introduced in the future.
Note that the R_390_RELATIVE relocations are taken care of by function
glue() in include/hw/elf_ops.h.inc introduced by commit 5dce07e1cb
("elf-loader: Provide the possibility to relocate s390 ELF files").
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-ID: <20241001153618.17791-3-mhartmay@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The assembler directive .align [1] has architecture-dependent behavior,
which may be ambiguous for the reader. Some architectures perform the
alignment in bytes, others in power of two. s390 does in bytes.
Use the directive .balign [2] instead, to clarify that the alignment
request is in bytes. No functional change.
[1] https://sourceware.org/binutils/docs/as/Align.html
[2] https://sourceware.org/binutils/docs/as/Balign.html
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-ID: <20241001153618.17791-2-mhartmay@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add two new qtests to verify that a valid IPL device can successfully boot after
failed IPL attempts from one or more invalid devices.
cdrom-test/as-fallback-device: Defines the primary boot target as a device that
is invalid for IPL and a second boot target that is valid for IPL. Ensures that
the valid device will be selected after the initial failed IPL.
cdrom-test/as-last-option: Defines the maximum number of boot devices (8)
where only the final entry in the boot order is valid. Ensures that a valid
device will be selected even after multiple failed IPL attempts from both
virtio-blk and virtio-scsi device types.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-20-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Update docs to show that s390x PC BIOS can support more than one boot device.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-19-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Allow attempts to boot from multiple IPL devices. If the first device fails to
IPL, select the pre-built IPLB for the next device in the boot order and attempt
to IPL from it. Continue this process until IPL is successful or there are no
devices left to try.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-18-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Because virtio-scsi type devices use a non-architected IPLB pbt code they cannot
be set and stored normally. Instead, the IPLB must be rebuilt during re-ipl.
As s390x does not natively support multiple boot devices, the devno field is
used to store the position in the boot order for the device.
Handling the rebuild as part of DIAG308 removes the need to check the devices
for invalid IPLBs later in the IPL.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-17-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Build an IPLB for any device with a bootindex (up to a maximum of 8 devices).
The IPLB chain is placed immediately before the BIOS in memory. Because this
is not a fixed address, the location of the next IPLB and number of remaining
boot devices is stored in the QIPL global variable for possible later access by
the guest during IPL.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-16-jrossi@linux.ibm.com>
[thuth: Fix endianness problem when accessing the qipl structure]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a loadparm property to the VirtioCcwDevice object so that different
loadparms can be defined on a per-device basis for CCW boot devices.
The machine/global loadparm is still supported. If both a global and per-device
loadparm are defined, the per-device value will override the global value for
that device, but any other devices that do not specify a per-device loadparm
will still use the global loadparm.
It is invalid to assign a loadparm to a non-boot device.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-15-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, structures defined in both hw/s390x/ipl.h and pc-bios/s390-ccw/iplb.h
must be kept in sync, which is prone to error. Instead, create a new directory
at include/hw/s390x/ipl/ to contain the definitions that must be shared.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-14-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from IPL functions such that a return code is propagated
back to the main IPL calling function (rather than terminating immediately),
which facilitates possible error recovery in the future.
A select few panics remain, which indicate fatal non-devices errors that must
result in termination.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-13-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from Netboot specific functions so that error recovery
may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-12-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from DASD IPL specific functions so that error recovery
may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-11-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from virtio-scsi IPL specific functions so that error
recovery may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-10-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from ECKD block device IPL specific functions so that
error recovery may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-9-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove panic-on-error from IPL ISO El Torito specific functions so that error
recovery may be possible in the future.
Functions that would previously panic now provide a return code.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-8-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove the information about the separate s390-netboot.img from
the documentation.
Co-authored by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20241020012953.1380075-7-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that the netboot code has been merged into the main s390-ccw.img,
it also does not make sense to keep the build rules in a separate
file. Thus let's merge netboot.mak into the main Makefile.
Message-Id: <20240621082422.136217-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the netboot code has now been merged into the main s390-ccw.img
binary, we don't need the separate s390-netboot.img anymore. Remove
it and the code that was responsible for loading it.
Message-Id: <20240621082422.136217-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We originally built a separate binary for the netboot code since it
was considered as experimental and we could not be sure that the
necessary SLOF module had been checked out. Time passed, the code
proved its usefulness, and the build system nowadays makes sure that
the SLOF module is checked out if you have a s390x compiler available
for building the s390-ccw bios. So there is no real compelling reason
anymore to keep the netboot code in a separate binary. Linking the
code together with the main s390-ccw.img will make future enhancements
much easier, like supporting more than one boot device.
Co-authored by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20241020012953.1380075-4-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are already using the libc from SLOF for the s390-netboot.img, and
this libc implementation is way more complete and accurate than the
simple implementation that we currently use for the s390-ccw.img binary.
Since we are now always assuming that the SLOF submodule is available
when building the s390-ccw bios (see commit bf6903f694), we can drop
the simple implementation and use the SLOF libc for the s390-ccw.img
binary, too.
Additionally replace sclp_print calls with puts/printf now that it is
available.
Co-authored by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20241020012953.1380075-3-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Current definition yields a negative 32bits value, messing up hwprobe
result when Zvfhmin extension presents. Replace it by using a 1ULL bit
shift value as done in kernel upstream.
Link: 5ea6764d90
Fixes: a3432cf227 ("linux-user/riscv: Sync hwprobe keys with Linux")
Cc: qemu-stable@nongnu.org
Signed-off-by: Yao Zi <ziyao@disroot.org>
Message-ID: <20241022160136.21714-2-ziyao@disroot.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 9651cead2f ("linux-user: add openat2 support in linux-user")
ships a definition of struct open_how_ver0 while assuming type __u64 is
available in code, which is not the case when building QEMU on musl.
Let's replaces __u64 with uint64_t.
Fixes: 9651cead2f ("linux-user: add openat2 support in linux-user")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20241022122929.17465-2-ziyao@disroot.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a function for formatting target sigsets. It can be useful for
other syscalls in the future, so put it into the beginning of strace.c.
For simplicity, do not implement the strace's ~[] output syntax.
Add a rt_sigprocmask return handler.
Example outputs:
753914 rt_sigprocmask(SIG_BLOCK,[SIGCHLD SIGTSTP SIGTTIN SIGTTOU],0x00007f80fddfe380,8) = 0 (oldset=[SIGTTOU])
753914 rt_sigprocmask(SIG_SETMASK,[SIGCHLD],NULL,8) = 0
753914 rt_sigprocmask(SIG_BLOCK,NULL,0x00007f80fddff3c0,8) = 0 (oldset=[])
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20241022102726.18520-1-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
do_setcontext() copies the target sigmask without endianness handling
and then uses target_to_host_sigset_internal(), which expects a
byte-swapped one. Use target_to_host_sigset() instead.
Fixes: bcd4933a23 ("linux-user: ppc signal handling")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241017125811.447961-2-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If one thread modifies the mappings and another thread prints them,
a situation may occur that the printer thread sees a guest mapping
without a corresponding host mapping, leading to a crash in
open_self_maps_2().
Cc: qemu-stable@nongnu.org
Fixes: 7b7a3366e1 ("linux-user: Use walk_memory_regions for open_self_maps")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241014203441.387560-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
