To perform audio capture we duplicate the TX logic of the previous
commit with the following difference: we receive data from the QEMU
audio backend and write it in the virt queue IO buffers the guest sends
to QEMU. When they are full (i.e. they have `period_bytes` amount of
data) or when recording stops in QEMU's audio backend, the buffer is
returned to the guest by notifying it.
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <e56a17741a24ccadfbbea19d3c60c9406b795b23.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Handle output IO messages in the transmit (TX) virtqueue.
It allocates a VirtIOSoundPCMBuffer for each IO message and copies the
data buffer to it. When the IO buffer is written to the host's sound
card, the guest will be notified that it has been consumed.
The lifetime of an IO message is:
1. Guest sends IO message to TX virtqueue.
2. QEMU adds it to the appropriate stream's IO buffer queue.
3. Sometime later, the host audio backend calls the output callback,
virtio_snd_pcm_out_cb(), which is defined with an AUD_open_out()
call. The callback gets an available number of bytes the backend can
receive. Then it writes data from the IO buffer queue to the backend.
If at any time a buffer is exhausted, it is returned to the guest as
completed.
4. If the guest releases the stream, its buffer queue is flushed by
attempting to write any leftover data to the audio backend and
releasing all IO messages back to the guest. This is how according to
the spec the guest knows the release was successful.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <b7c6fc458c763d09a4abbcb620ae9b220afa5b8f.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Handle the PCM release control request, which is necessary for flushing
pending sound IO. No IO is handled yet so currently it only replies to
the request.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <ae0afa16461429df1a2f268313d5bfcca27479ec.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Handles the PCM prepare control request. It initializes a PCM stream
when the guests asks for it.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <c6a9c437ef48e45f083fc957dcf7fe18a028e657.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Handle the set parameters control request. It reconfigures a stream
based on a guest's preference if the values are valid and supported.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <d0d19928691f9375bfd83388806786cb7b161301.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Handle the start and stop control messages for a stream_id. This request
does nothing at the moment except for replying to it. Audio playback
or capture will be started/stopped here in follow-up commits.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <9657dbfe3cb4a48ceb033ceb5977dc08669dfefd.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Respond to the VIRTIO_SND_R_PCM_INFO control request with the parameters
of each requested PCM stream.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <5ecea6ba2fb0e3957d7d90bc4dbac521a3d1f678.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Receive guest requests in the control (CTRL) queue of the virtio sound
device and reply with a NOT SUPPORTED error to all control commands.
The receiving handler is virtio_snd_handle_ctrl(). It stores all control
messages in the queue in the device's command queue. Then it calls
virtio_snd_process_cmdq() to handle each message.
The handler is process_cmd() which replies with VIRTIO_SND_S_NOT_SUPP.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <3224aff87e7c4f2777bfe1bbbbca93b72525992c.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds a PCI wrapper device for the virtio-sound device.
It is necessary to instantiate a virtio-snd device in a guest.
All sound logic will be added to the virtio-snd device in the following
commits.
To add this device with a guest, you'll need a >=5.13 kernel compiled
with CONFIG_SND_VIRTIO=y, which at the time of writing most distros have
off by default.
Use with following flags in the invocation:
Pulseaudio:
-audio driver=pa,model=virtio
or
-audio driver=pa,model=virtio,server=/run/user/1000/pulse/native
sdl:
-audio driver=sdl,model=virtio
coreaudio (macos/darwin):
-audio driver=coreaudio,model=virtio
etc.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <b223598d59f56ead6a6d8d9bb6801e17489ddaa4.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a new VIRTIO device for the virtio sound device id. Functionality
will be added in the following commits.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <f9678a41fe97b5886c1b04795f1be046509de866.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A virtio-fs device's VM state consists of:
- the virtio device (vring) state (VMSTATE_VIRTIO_DEVICE)
- the back-end's (virtiofsd's) internal state
We get/set the latter via the new vhost operations to transfer migratory
state. It is its own dedicated subsection, so that for external
migration, it can be disabled.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20231016134243.68248-8-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_save_backend_state() and vhost_load_backend_state() can be used by
vhost front-ends to easily save and load the back-end's state to/from
the migration stream.
Because we do not know the full state size ahead of time,
vhost_save_backend_state() simply reads the data in 1 MB chunks, and
writes each chunk consecutively into the migration stream, prefixed by
its length. EOF is indicated by a 0-length chunk.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20231016134243.68248-7-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the interface for transferring the back-end's state during migration
as defined previously in vhost-user.rst.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20231016134243.68248-6-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* linux-user/elfload: Add missing arm64 hwcap values
* stellaris-gamepad: Convert to qdev
* docs/specs: Convert various txt docs to rST
* MAINTAINERS: Make sure that gicv3_internal.h is covered, too
* hw/arm/pxa2xx_gpio: Pass CPU using QOM link property
* hw/watchdog/wdt_imx2: Trace MMIO access and timer activity
* hw/misc/imx7_snvs: Trace MMIO access
* hw/misc/imx6_ccm: Convert DPRINTF to trace events
* hw/i2c/pm_smbus: Convert DPRINTF to trace events
* target/arm: Enable FEAT_MOPS insns in user-mode emulation
* linux-user: Report AArch64 hwcap2 fields above bit 31
* target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly
* target/arm: Fix SVE STR increment
* hw/char/stm32f2xx_usart: implement TX interrupts
* target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk
* xlnx-versal-virt: Add AMD/Xilinx TRNG device
-----BEGIN PGP SIGNATURE-----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=OgfH
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20231102' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* linux-user/elfload: Add missing arm64 hwcap values
* stellaris-gamepad: Convert to qdev
* docs/specs: Convert various txt docs to rST
* MAINTAINERS: Make sure that gicv3_internal.h is covered, too
* hw/arm/pxa2xx_gpio: Pass CPU using QOM link property
* hw/watchdog/wdt_imx2: Trace MMIO access and timer activity
* hw/misc/imx7_snvs: Trace MMIO access
* hw/misc/imx6_ccm: Convert DPRINTF to trace events
* hw/i2c/pm_smbus: Convert DPRINTF to trace events
* target/arm: Enable FEAT_MOPS insns in user-mode emulation
* linux-user: Report AArch64 hwcap2 fields above bit 31
* target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly
* target/arm: Fix SVE STR increment
* hw/char/stm32f2xx_usart: implement TX interrupts
* target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk
* xlnx-versal-virt: Add AMD/Xilinx TRNG device
* tag 'pull-target-arm-20231102' of https://git.linaro.org/people/pmaydell/qemu-arm: (33 commits)
tests/qtest: Introduce tests for AMD/Xilinx Versal TRNG device
hw/arm: xlnx-versal-virt: Add AMD/Xilinx TRNG device
hw/misc: Introduce AMD/Xilix Versal TRNG device
target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk
hw/char/stm32f2xx_usart: Add more definitions for CR1 register
hw/char/stm32f2xx_usart: Update IRQ when DR is written
hw/char/stm32f2xx_usart: Extract common IRQ update code to update_irq()
target/arm: Fix SVE STR increment
target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly
linux-user: Report AArch64 hwcap2 fields above bit 31
target/arm: Enable FEAT_MOPS insns in user-mode emulation
hw/i2c/pm_smbus: Convert DPRINTF to trace events
hw/misc/imx6_ccm: Convert DPRINTF to trace events
hw/misc/imx7_snvs: Trace MMIO access
hw/watchdog/wdt_imx2: Trace timer activity
hw/watchdog/wdt_imx2: Trace MMIO access
hw/arm/pxa2xx_gpio: Pass CPU using QOM link property
MAINTAINERS: Make sure that gicv3_internal.h is covered, too
docs/specs/vmgenid: Convert to rST
docs/specs/vmcoreinfo: Convert to rST
...
Conflicts:
hw/input/stellaris_input.c
The qdev conversion in this pull request ("stellaris-gamepad: Convert
to qdev") eliminates the vmstate_register() call that was converted to
vmstate_register_any() in the conflicting migration pull request.
vmstate_register_any() is no longer necessary now that this device has
been converted to qdev, so take this pull request's version of
stellaris_gamepad.c over the previous pull request's
stellaris_input.c (the file was renamed).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Hi
In this pull request:
- migration reboot mode (steve)
* I disabled the test because our CI don't like programs using so
much shared memory. Searching for a fix.
- test for postcopy recover (fabiano)
- MigrateAddress QAPI (het)
- better return path error handling (peter)
- traces for downtime (peter)
- vmstate_register() check for duplicates (juan)
thomas find better solutions for s390x and ipmi.
now also works on s390x
Please, apply.
-----BEGIN PGP SIGNATURE-----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=uaqL
-----END PGP SIGNATURE-----
Merge tag 'migration-20231102-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request (20231102)
Hi
In this pull request:
- migration reboot mode (steve)
* I disabled the test because our CI don't like programs using so
much shared memory. Searching for a fix.
- test for postcopy recover (fabiano)
- MigrateAddress QAPI (het)
- better return path error handling (peter)
- traces for downtime (peter)
- vmstate_register() check for duplicates (juan)
thomas find better solutions for s390x and ipmi.
now also works on s390x
Please, apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmVDipMACgkQ9IfvGFhy
# 1yNYnQ/9E5Cywsoqljqa/9FiKBSII2qMrmkfu6JLKqePnsh5pFZiukbudYRuJCCe
# ZTDEmD0NmKRJbDx2xRU1qx/e6gKJy+gz37KP89Buuh/WwZHPboPYtxQpGvCSiH26
# J3i+1+TgaqmkLzcO35wa8tp6gneQclWeAwKgMvdb4cm2pJEhgWRKI62ccyLzxeve
# UCzFQn60t55ETyVZGnRD4YwdTQvGKH+DPlyTuJOLR3DePuvZd8EdH+ypvB4RLAy7
# 3+CuQOxmF5LRXPbpJuAeOsudbmhhHzrO/yL7ZmsiKQTthsJv+SzC1bO94jhQrawZ
# Q7GCii5KpGq0KnRTRKZRGk6XKwxcYRduXMX3R5tXuVmDmCZsjhXzziU8yEdftph8
# 5TJdk1o0Gb043EFu81mrsQYS+9yJqe6sy6m3PTJaec54cAty5ln+c17WOvpAOaSV
# +1phe05ftuVPmQ3KWhbIR/tCmavNLwEZxpVIfyaKJx04bFbtQ9gRpRyURORX4KXc
# s4WXvNirQEohxYBnP4TPvA09xBTW3V08pk/wRDwt0YDXnLiqCltOuxD8r05K8K4B
# MkCLcWj0g7he2tBkF60oz1KSIE0oTB81um9AzLIv5F2YSYLaJM5BIcoC437MR2f4
# MOR7drR1fP5GsRu/SeU5BWvhVq3IvdOxR7G2MLNRJJvl7ZtGXDc=
# =uaqL
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Nov 2023 19:40:03 HKT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20231102-pull-request' of https://gitlab.com/juan.quintela/qemu: (40 commits)
migration: modify test_multifd_tcp_none() to use new QAPI syntax.
migration: Implement MigrateChannelList to hmp migration flow.
migration: Implement MigrateChannelList to qmp migration flow.
migration: modify migration_channels_and_uri_compatible() for new QAPI syntax
migration: New migrate and migrate-incoming argument 'channels'
migration: Convert the file backend to the new QAPI syntax
migration: convert exec backend to accept MigrateAddress.
migration: convert rdma backend to accept MigrateAddress
migration: convert socket backend to accept MigrateAddress
migration: convert migration 'uri' into 'MigrateAddress'
migration: New QAPI type 'MigrateAddress'
migration: Change ram_dirty_bitmap_reload() retval to bool
tests/migration-test: Add a test for postcopy hangs during RECOVER
migration: Allow network to fail even during recovery
migration: Refactor error handling in source return path
tests/qtest: migration: add reboot mode test
cpr: reboot mode
cpr: relax vhost migration blockers
cpr: relax blockdev migration blockers
migration: per-mode blockers
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Connect the support for Versal True Random Number Generator
(TRNG) device.
Warning: unlike the TRNG component in a real device from the
Versal device familiy, the connected TRNG model is not of
cryptographic grade and is not intended for use cases when
cryptograpically strong TRNG is needed.
Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20231031184611.3029156-3-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a non-cryptographic grade implementation of the
model for the True Random Number Generator (TRNG) component
in AMD/Xilinx Versal device family.
This implements all 3 modes defined by the actual hardware
specs, all of which selectable by guest software at will
at anytime:
1) PRNG mode, in which the generated sequence is required to
be reproducible after reseeded by the same 384-bit value
as supplied by guest software.
2) Test mode, in which the generated sequence is required to
be reproducible ater reseeded by the same 128-bit test
seed supplied by guest software.
3) TRNG mode, in which non-reproducible sequence is generated
based on periodic reseed by a suitable entropy source.
This model is only intended for non-real world testing of
guest software, where cryptographically strong PRNG or TRNG
is not needed.
This model supports versions 1 & 2 of the device, with
default to be version 2; the 'hw-version' uint32 property
can be set to 0x0100 to override the default.
Other implemented properties:
- 'forced-prng', uint64
When set to non-zero, mode 3's entropy source is implemented
as a deterministic sequence based on the given value and other
deterministic parameters.
This option allows the emulation to test guest software using
mode 3 and to reproduce data-dependent defects.
- 'fips-fault-events', uint32, bit-mask
bit 3: Triggers the SP800-90B entropy health test fault irq
bit 1: Triggers the FIPS 140-2 continuous test fault irq
Signed-off-by: Tong Ho <tong.ho@amd.com>
Message-id: 20231031184611.3029156-2-tong.ho@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let the trace messages slightly deviate from the function names
("smb" -> "smbus") being traced in order to avoid conflights with the SMB
protocol.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20231028122415.14869-6-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231028122415.14869-5-shentey@gmail.com
[PMM: Add "Hz" unit indicator to frequency traces]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231028122415.14869-4-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20231028122415.14869-3-shentey@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231028122415.14869-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of passing the CPU index and resolving it,
use a QOM link to directly pass the CPU.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030083706.63685-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert docs/specs/standard-vga.txt to rST format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-6-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Now that we have converted to qdev, we can use the newer
qemu_input_handler_register() API rather than the legacy
qemu_add_kbd_event_handler().
Since we only have one user, take the opportunity to convert
from scancodes to QCodes, rather than using
qemu_input_key_value_to_scancode() (which adds an 0xe0
prefix and encodes up/down indication in the scancode,
which our old handler function then had to reverse). That
lets us drop the old state field which was tracking whether
we were halfway through a two-byte scancode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-7-peter.maydell@linaro.org
Convert the hw/input/stellaris_input device to qdev.
The interface uses an array property for the board to specify the
keycodes to use, so the s->keycodes memory is now allocated by the
array-property machinery.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-6-peter.maydell@linaro.org
Currently for each button on the device we have a
StellarisGamepadButton struct which has the irq, keycode and pressed
state for it. When we convert to qdev, the qdev property and GPIO
APIs are going to require that we have separate arrays for the irqs
and keycodes. Convert from array-of-structs to three separate arrays
in preparation.
This is a migration compatibility break for the stellaris boards
(lm3s6965evb, lm3s811evb).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-5-peter.maydell@linaro.org
--
v1=>v2: mention migration compat break in commit message;
bump version fields in vmstate
Instead of exposing the ugly hack of how we represent arrays in qdev (a
static "foo-len" property and after it is set, dynamically created
"foo[i]" properties) to boards, add an interface that allows setting the
whole array at once.
Once all internal users of devices with array properties have been
converted to use this function, we can change the implementation to move
away from this hack.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-4-peter.maydell@linaro.org
Rename the structs in stellaris_gamepad.c to our now-standard
CamelCase convention.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-3-peter.maydell@linaro.org
This source file implements a stellaris gamepad device; rename
it so that it is a closer match to the device name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-2-peter.maydell@linaro.org
The NeXTcube uses a NCR 53C90 SCSI interface for its disks, so we should
be able to use the ESP controller from QEMU here. The code here has been
basically taken from Bryce Lanham's GSoC 2011 contribution, except for
the next_scsi_init() function which has been rewritte as a replacement
for the esp_init() function (that has been removed quite a while ago).
Note that SCSI is not working yet. The ESP code likely needs some more
fixes first and there still might be some bugs left in they way we wire
it up for the NeXT-Cube machine.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20230930132351.30282-4-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The ROM is also available at address 0, so add a proper mirror
for this address.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20230930132351.30282-2-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Add the cpr-reboot migration mode. Usage:
$ qemu-system-$arch -monitor stdio ...
QEMU 8.1.50 monitor - type 'help' for more information
(qemu) migrate_set_capability x-ignore-shared on
(qemu) migrate_set_parameter mode cpr-reboot
(qemu) migrate -d file:vm.state
(qemu) info status
VM status: paused (postmigrate)
(qemu) quit
$ qemu-system-$arch -monitor stdio -incoming defer ...
QEMU 8.1.50 monitor - type 'help' for more information
(qemu) migrate_set_capability x-ignore-shared on
(qemu) migrate_set_parameter mode cpr-reboot
(qemu) migrate_incoming file:vm.state
(qemu) info status
VM status: running
In this mode, the migrate command saves state to a file, allowing one
to quit qemu, reboot to an updated kernel, and restart an updated version
of qemu. The caller must specify a migration URI that writes to and reads
from a file. Unlike normal mode, the use of certain local storage options
does not block the migration, but the caller must not modify guest block
devices between the quit and restart. To avoid saving guest RAM to the
file, the memory backend must be shared, and the @x-ignore-shared migration
capability must be set. Guest RAM must be non-volatile across reboot, such
as by backing it with a dax device, but this is not enforced. The restarted
qemu arguments must match those used to initially start qemu, plus the
-incoming option.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1698263069-406971-6-git-send-email-steven.sistare@oracle.com>
vhost blocks migration if logging is not supported to track dirty
memory, and vhost-user blocks it if the log cannot be saved to a shm fd.
vhost-vdpa blocks migration if both hosts do not support all the device's
features using a shadow VQ, for tracking requests and dirty memory.
vhost-scsi blocks migration if storage cannot be shared across hosts,
or if state cannot be migrated.
None of these conditions apply if the old and new qemu processes do
not run concurrently, and if new qemu starts on the same host as old,
which is the case for cpr.
Narrow the scope of these blockers so they only apply to normal mode.
They will not block cpr modes when they are added in subsequent patches.
No functional change until a new mode is added.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1698263069-406971-5-git-send-email-steven.sistare@oracle.com>
Create a mode migration parameter that can be used to select alternate
migration algorithms. The default mode is normal, representing the
current migration algorithm, and does not need to be explicitly set.
No functional change until a new mode is added, except that the mode is
shown by the 'info migrate' command.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1698263069-406971-2-git-send-email-steven.sistare@oracle.com>
I have no idea if we can have more than one vmware_vga device, so play
it safe.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-14-quintela@redhat.com>
We can have more than one eeprom93xx.
For instance:
e100_nic_realize() -> eeprom93xx_new()
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-13-quintela@redhat.com>
Current code does:
- register pre_2_10_vmstate_dummy_icp with "icp/server" and instance
dependinfg on cpu number
- for newer machines, it register vmstate_icp with "icp/server" name
and instance 0
- now it unregisters "icp/server" for the 1st instance.
This is wrong at many levels:
- we shouldn't have two VMSTATEDescriptions with the same name
- In case this is the only solution that we can came with, it needs to
be:
* register pre_2_10_vmstate_dummy_icp
* unregister pre_2_10_vmstate_dummy_icp
* register real vmstate_icp
Created vmstate_replace_hack_for_ppc() with warnings left and right
that it is a hack.
CC: Cedric Le Goater <clg@kaod.org>
CC: Daniel Henrique Barboza <danielhb413@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Greg Kurz <groug@kaod.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-8-quintela@redhat.com>
This are the easiest cases, where we were already using
VMSTATE_INSTANCE_ID_ANY.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-3-quintela@redhat.com>
We must not call register_savevm_live() from an instance_init() function
(since this could be called multiple times during device introspection).
Move this to the realize() function instead.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020150554.664422-4-thuth@redhat.com>
There's no need for dedicated handlers here if they don't do anything
special.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020150554.664422-3-thuth@redhat.com>
Since the instance_init() function immediately tries to set the
property to "true", the s390_skeys_set_migration_enabled() tries
to register a savevm handler during instance_init(). However,
instance_init() functions can be called multiple times, e.g. for
introspection of devices. That means multiple instances of devices
can be created during runtime (which is fine as long as they all
don't get realized, too), so the "Prevent double registration of
savevm handler" check in the s390_skeys_set_migration_enabled()
function does not work at all as expected (since there could be
more than one instance).
Thus we must not call register_savevm_live() from an instance_init()
function at all. Move this to the realize() function instead. This
way we can also get rid of the property getter and setter functions
completely, simplifying the code along the way quite a bit.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020150554.664422-2-thuth@redhat.com>
instance_init() can be called multiple times, e.g. during introspection
of the device. We should not install the vmstate handlers here. Do it
in the realize() function instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020145554.662751-1-thuth@redhat.com>
There is no point in having mcf_uart_init() demote the DeviceState
pointer and return a void one. Directly return the real typedef.
mcf_uart_init() do both init + realize: rename as mcf_uart_create().
Similarly, mcf_uart_mm_init() do init / realize / mmap: rename as
mcf_uart_create_mmap().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231019104929.16517-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Mechanical change using the following coccinelle script:
@@
identifier dev;
identifier sbd;
expression qom_type;
expression addr;
@@
- dev = qdev_new(qom_type);
- sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
- sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr);
+ dev = sysbus_create_simple(qom_type, addr, NULL);
then manually removing the 'dev' variable to avoid:
error: variable 'dev' set but not used [-Werror,-Wunused-but-set-variable]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231024083010.12453-6-philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
QOM objects shouldn't access each other internals fields
except using the QOM API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20231024083010.12453-5-philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
