The expression "imm * 2" in gen_ri2() can wrap around if imm is large
enough.
Fix by casting imm to int64_t, like it's done in disas_jdest().
Fixes: e8ecdfeb30 ("Fix EXECUTE of relative branches")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-8-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
LRA should perform DAT regardless of whether it's on or off.
Disable DAT check for MMU_S390_LRA.
Fixes: defb0e3157 ("s390x: Implement opcode helpers")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20230704081506.276055-7-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When a DAT error occurs, LRA is supposed to write the error information
to the bottom 32 bits of R1, and leave the top 32 bits of R1 alone.
Fix by passing the original value of R1 into helper and copying the
top 32 bits to the return value.
Fixes: d8fe4a9c28 ("target-s390: Convert LRA")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20230704081506.276055-6-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Using a large R0 causes an assertion error:
qemu-s390x: target/s390x/tcg/mem_helper.c:183: access_prepare_nf: Assertion `size > 0 && size <= 4096' failed.
Even though PoP explicitly advises against using more than 8 bits for the
size, an emulator crash is never a good thing.
Fix by truncating the size to 8 bits.
Fixes: ea0a1053e2 ("s390x/tcg: Implement Miscellaneous-Instruction-Extensions Facility 3 for the s390x")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20230704081506.276055-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Protected Virtualization (PV) is not a real hardware device:
it is a feature of the firmware on s390x that is exposed to
userspace via the KVM interface.
Move the pv.c/pv.h files to target/s390x/kvm/ to make this clearer.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230624200644.23931-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This implements the AES64DSM instruction. This was the last use
of aes64_operation and its support macros, so remove them all.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64ESM instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64IM instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64DS instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64ES instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESIMC instruction. We have converted everything
to crypto/aes-round.h; crypto/aes.h is no longer needed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESMC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESD instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESE instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split these helpers so that we are not passing 'decrypt'
within the simd descriptor.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESDEC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESENC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESIMC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESDECLAST instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESENCLAST instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the VNCIPHER instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the VCIPHER instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the VNCIPHERLAST instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the VCIPHERLAST instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not currently have a table in crypto/ for just MixColumns.
Move both tables for consistency.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This commit addresses a bug in the AVR interrupt handling code.
The modification involves replacing the usage of the ctz32 function
with ctz64 to ensure proper handling of interrupts above 33 in the AVR
target.
Previously, timers 3, 4, and 5 interrupts were not functioning correctly
because most of their interrupt vectors are numbered above 33.
Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: updated subject line to have subsytem prefix)
In this last queue for 8.1 we have a lot of fixes and improvements all
around: SMT support for powerNV, XIVE fixes, PPC440 cleanups, exception
handling cleanups and kvm_pph.h cleanups just to name a few.
Thanks everyone in the qemu-ppc community for all the contributions for
the next QEMU 8.1 release.
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZKgihBYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFksr0A/jrvSDSDxB5mR7bo0dNGndLXcdTo
ZGr6k6pcMpr7RDOAAQDVeaw7f8djQ4Aaelk6v1wPs5bYfNY2ElF4NsqHJFX2Cg==
=8lDs
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20230707-1' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-07-07:
In this last queue for 8.1 we have a lot of fixes and improvements all
around: SMT support for powerNV, XIVE fixes, PPC440 cleanups, exception
handling cleanups and kvm_pph.h cleanups just to name a few.
Thanks everyone in the qemu-ppc community for all the contributions for
the next QEMU 8.1 release.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZKgihBYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFksr0A/jrvSDSDxB5mR7bo0dNGndLXcdTo
# ZGr6k6pcMpr7RDOAAQDVeaw7f8djQ4Aaelk6v1wPs5bYfNY2ElF4NsqHJFX2Cg==
# =8lDs
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 07 Jul 2023 03:34:44 PM BST
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20230707-1' of https://gitlab.com/danielhb/qemu: (59 commits)
ppc/pnv: Add QME region for P10
target/ppc: Remove pointless checks of CONFIG_USER_ONLY in 'kvm_ppc.h'
target/ppc: Restrict 'kvm_ppc.h' to sysemu in cpu_init.c
target/ppc: Define TYPE_HOST_POWERPC_CPU in cpu-qom.h
target/ppc: Move CPU QOM definitions to cpu-qom.h
target/ppc: Reorder #ifdef'ry in kvm_ppc.h
target/ppc: Have 'kvm_ppc.h' include 'sysemu/kvm.h'
target/ppc: Machine check on invalid real address access on POWER9/10
tests/qtest: Add xscom tests for powernv10 machine
ppc/pnv: Set P10 core xscom region size to match hardware
ppc/pnv: Log all unimp warnings with similar message
ppc440_pcix: Rename QOM type define abd move it to common header
ppc4xx_pci: Add define for ppc4xx-host-bridge type name
ppc4xx_pci: Rename QOM type name define
ppc440_pcix: Stop using system io region for PCI bus
ppc440_pcix: Don't use iomem for regs
ppc/sam460ex: Remove address_space_mem local variable
ppc440: Remove ppc460ex_pcie_init legacy init function
ppc440: Add busnum property to PCIe controller model
ppc440: Stop using system io region for PCIe buses
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The GraniteRapids CPU model mainly adds the following new features
based on SapphireRapids:
- PREFETCHITI CPUID.(EAX=7,ECX=1):EDX[bit 14]
- AMX-FP16 CPUID.(EAX=7,ECX=1):EAX[bit 21]
And adds the following security fix for corresponding vulnerabilities:
- MCDT_NO CPUID.(EAX=7,ECX=2):EDX[bit 5]
- SBDR_SSDP_NO MSR_IA32_ARCH_CAPABILITIES[bit 13]
- FBSDP_NO MSR_IA32_ARCH_CAPABILITIES[bit 14]
- PSDP_NO MSR_IA32_ARCH_CAPABILITIES[bit 15]
- PBRSB_NO MSR_IA32_ARCH_CAPABILITIES[bit 24]
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-7-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SapphireRapids has bit 13, 14 and 15 of MSR_IA32_ARCH_CAPABILITIES
enabled, which are related to some security fixes.
Add version 2 of SapphireRapids CPU model with those bits enabled also.
Signed-off-by: Lei Wang <lei4.wang@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Message-ID: <20230706054949.66556-6-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, bit 13, 14, 15 and 24 of MSR_IA32_ARCH_CAPABILITIES are
disclosed for fixing security issues, so add those bit definitions.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-ID: <20230706054949.66556-5-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MCDT_NO bit indicates HW contains the security fix and doesn't need to
be mitigated to avoid data-dependent behaviour for certain instructions.
It needs no hypervisor support. Treat it as supported regardless of what
KVM reports.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-4-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID.(EAX=7,ECX=2):EDX[bit 5] enumerates MCDT_NO. Processors enumerate
this bit as 1 do not exhibit MXCSR Configuration Dependent Timing (MCDT)
behavior and do not need to be mitigated to avoid data-dependent behavior
for certain instructions.
Since MCDT_NO is in a new sub-leaf, add a new CPUID feature word
FEAT_7_2_EDX. Also update cpuid_level_func7 by FEAT_7_2_EDX.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-3-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If FEAT_7_1_EAX is 0 and FEAT_7_1_EDX is non-zero, as is the case
with a Granite Rapids host and
'-cpu host,-avx-vnni,-avx512-bf16,-fzrm,-fsrs,-fsrc,-amx-fp16', we can't
get CPUID_7_1 leaf even though CPUID_7_1_EDX has non-zero value.
Update cpuid_level_func7 according to CPUID_7_1_EDX, otherwise
guest may report wrong maximum number sub-leaves in leaf 07H.
Fixes: eaaa197d5b ("target/i386: Add support for AVX-VNNI-INT8 in CPUID enumeration")
Cc: qemu-stable@nongnu.org
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-2-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-ID: <20230627115124.19632-7-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
User emulation shouldn't need any of the KVM prototypes
declared in "kvm_ppc.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-ID: <20230627115124.19632-6-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
TYPE_HOST_POWERPC_CPU is used in various places of cpu_init.c,
in order to restrict "kvm_ppc.h" to sysemu, move this QOM-related
definition to cpu-qom.h.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-ID: <20230627115124.19632-5-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Keep a single if/else/endif block checking CONFIG_KVM.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230627115124.19632-3-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
"kvm_ppc.h" declares:
int kvm_handle_nmi(PowerPCCPU *cpu, struct kvm_run *run);
'struct kvm_run' is declared in "sysemu/kvm.h", include it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230627115124.19632-2-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
ppc currently silently accepts invalid real address access. Catch
these and turn them into machine checks on POWER9/10 machines.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230703120301.45313-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
HID is a per-core shared register, skiboot sets this (e.g., setting
HILE) on one thread and that must affect all threads of the core.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230705120631.27670-3-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Power ISA has the concept of sub-processors:
Hardware is allowed to sub-divide a multi-threaded processor into
"sub-processors" that appear to privileged programs as multi-threaded
processors with fewer threads.
POWER9 and POWER10 have two modes, either every thread is a
sub-processor or all threads appear as one multi-threaded processor. In
the user manuals these are known as "LPAR per thread" / "Thread LPAR",
and "LPAR per core" / "1 LPAR", respectively.
The practical difference is: in thread LPAR mode, non-hypervisor SPRs
are not shared between threads and msgsndp can not be used to message
siblings. In 1 LPAR mode, some SPRs are shared and msgsndp is usable.
Thrad LPAR allows multiple partitions to run concurrently on the same
core, and is a requirement for KVM to run on POWER9/10 (which does not
gang-schedule an LPAR on all threads of a core like POWER8 KVM).
Traditionally, SMT in PAPR environments including PowerVM and the
pseries QEMU machine with KVM acceleration behaves as in 1 LPAR mode.
In OPAL systems, Thread LPAR is used. When adding SMT to the powernv
machine, it is therefore preferable to emulate Thread LPAR.
To account for this difference between pseries and powernv, an LPAR mode
flag is added such that SPRs can be implemented as per-LPAR shared, and
that becomes either per-thread or per-core depending on the flag.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230705120631.27670-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently on PPC64 qemu always dumps the guest memory in
Big Endian (BE) format even though the guest running in Little Endian
(LE) mode. So crash tool fails to load the dump as illustrated below:
Log :
$ virsh dump DOMAIN --memory-only dump.file
Domain 'DOMAIN' dumped to dump.file
$ crash vmlinux dump.file
<snip>
crash 8.0.2-1.el9
WARNING: endian mismatch:
crash utility: little-endian
dump.file: big-endian
WARNING: machine type mismatch:
crash utility: PPC64
dump.file: (unknown)
crash: dump.file: not a supported file format
<snip>
This happens because cpu_get_dump_info() passes cpu->env->has_hv_mode
to function ppc_interrupts_little_endian(), the cpu->env->has_hv_mode
always set for powerNV even though the guest is not running in hv mode.
The hv mode should be taken from msr_mask MSR_HVB bit
(cpu->env.msr_mask & MSR_HVB). This patch fixes the issue by passing
MSR_HVB value to ppc_interrupts_little_endian() in order to determine
the guest endianness.
The crash tool also expects guest kernel endianness should match the
endianness of the dump.
The patch was tested on POWER9 box booted with Linux as host in
following cases:
Host-Endianess Qemu-Target-Machine Qemu-Generated-Guest
Memory-Dump-Format
BE powernv(OPAL/PowerNV) LE
BE powernv(OPAL/PowerNV) BE
LE powernv(OPAL/PowerNV) LE
LE powernv(OPAL/PowerNV) BE
LE pseries(OPAL/PowerNV/pSeries) KVMHV LE
LE pseries TCG LE
Fixes: 5609400a42 ("target/ppc: Set the correct endianness for powernv memory
dumps")
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Message-ID: <20230623072506.34713-1-nnmlinux@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We can get CPUState from env with env_cpu without going through
PowerPCCPU and casting that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <28424220f37f51ce97f24cadc7538a9c0d16cb45.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 7a3fe174b1 removed usage of POWERPC_SYSCALL_VECTORED, drop
the unused define as well.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <50adc24f9d408882128e896d8a81a1a059c41836.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some helpers only have a CPUState local to call cpu_interrupt_exittb()
but we can use env_cpu for that and remove the local.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <aa34e449552c6ab52d48938ccbe762fc06adac01.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
