Hyper-V TLFS specifies this enlightenment as:
"NoNonArchitecturalCoreSharing - Indicates that a virtual processor will never
share a physical core with another virtual processor, except for virtual
processors that are reported as sibling SMT threads. This can be used as an
optimization to avoid the performance overhead of STIBP".
However, STIBP is not the only implication. It was found that Hyper-V on
KVM doesn't pass MD_CLEAR bit to its guests if it doesn't see
NoNonArchitecturalCoreSharing bit.
KVM reports NoNonArchitecturalCoreSharing in KVM_GET_SUPPORTED_HV_CPUID to
indicate that SMT on the host is impossible (not supported of forcefully
disabled).
Implement NoNonArchitecturalCoreSharing support in QEMU as tristate:
'off' - the feature is disabled (default)
'on' - the feature is enabled. This is only safe if vCPUS are properly
pinned and correct topology is exposed. As CPU pinning is done outside
of QEMU the enablement decision will be made on a higher level.
'auto' - copy KVM setting. As during live migration SMT settings on the
source and destination host may differ this requires us to add a migration
blocker.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20191018163908.10246-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Patch logs MCE AO, AR messages injected to guest or taken by QEMU itself.
We print the QEMU address for guest MCEs, helps on hypervisors that have
another source of MCE logging like mce log, and when they go missing.
For example we found these QEMU logs:
September 26th 2019, 17:36:02.309 Droplet-153258224: Guest MCE Memory Error at qemu addr 0x7f8ce14f5000 and guest 3d6f5000 addr of type BUS_MCEERR_AR injected qemu-system-x86_64 amsN ams3nodeNNNN
September 27th 2019, 06:25:03.234 Droplet-153258224: Guest MCE Memory Error at qemu addr 0x7f8ce14f5000 and guest 3d6f5000 addr of type BUS_MCEERR_AR injected qemu-system-x86_64 amsN ams3nodeNNNN
The first log had a corresponding mce log entry, the second didnt (logging
thresholds) we can infer from second entry same PA and mce type.
Signed-off-by: Mario Smarduch <msmarduch@digitalocean.com>
Message-Id: <20191009164459.8209-3-msmarduch@digitalocean.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new version of Snowridge CPU model that removes MPX feature.
MPX support is being phased out by Intel. GCC has dropped it, Linux kernel
and KVM are also going to do that in the future.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20191012024748.127135-1-xiaoyao.li@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
KVM has a 80-entry limit at KVM_SET_CPUID2. With the
introduction of CPUID[0x1F], it is now possible to hit this limit
with unusual CPU configurations, e.g.:
$ ./x86_64-softmmu/qemu-system-x86_64 \
-smp 1,dies=2,maxcpus=2 \
-cpu EPYC,check=off,enforce=off \
-machine accel=kvm
qemu-system-x86_64: kvm_init_vcpu failed: Argument list too long
This happens because QEMU adds a lot of all-zeroes CPUID entries
for unused CPUID leaves. In the example above, we end up
creating 48 all-zeroes CPUID entries.
KVM already returns all-zeroes when emulating the CPUID
instruction if an entry is missing, so the all-zeroes entries are
redundant. Skip those entries. This reduces the CPUID table
size by half while keeping CPUID output unchanged.
Reported-by: Yumei Huang <yuhuang@redhat.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1741508
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190822225210.32541-1-ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Drop the duplicated definition of cpuid AVX512_VBMI macro and rename
it as CPUID_7_0_ECX_AVX512_VBMI. Rename CPUID_7_0_ECX_VBMI2 as
CPUID_7_0_ECX_AVX512_VBMI2.
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190926021055.6970-3-tao3.xu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add some comments, clean up comments over 80 chars per line. And there
is an extra line in comment of CPUID_8000_0008_EBX_WBNOINVD, remove
the extra enter and spaces.
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190926021055.6970-2-tao3.xu@intel.com>
[ehabkost: rebase to latest git master]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When I run QEMU with KVM under Valgrind, I currently get this warning:
Syscall param ioctl(generic) points to uninitialised byte(s)
at 0x95BA45B: ioctl (in /usr/lib64/libc-2.28.so)
by 0x429DC3: kvm_ioctl (kvm-all.c:2365)
by 0x51B249: kvm_arch_get_supported_msr_feature (kvm.c:469)
by 0x4C2A49: x86_cpu_get_supported_feature_word (cpu.c:3765)
by 0x4C4116: x86_cpu_expand_features (cpu.c:5065)
by 0x4C7F8D: x86_cpu_realizefn (cpu.c:5242)
by 0x5961F3: device_set_realized (qdev.c:835)
by 0x7038F6: property_set_bool (object.c:2080)
by 0x707EFE: object_property_set_qobject (qom-qobject.c:26)
by 0x705814: object_property_set_bool (object.c:1338)
by 0x498435: pc_new_cpu (pc.c:1549)
by 0x49C67D: pc_cpus_init (pc.c:1681)
Address 0x1ffeffee74 is on thread 1's stack
in frame #2, created by kvm_arch_get_supported_msr_feature (kvm.c:445)
It's harmless, but a little bit annoying, so silence it by properly
initializing the whole structure with zeroes.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some secondary controls are automatically enabled/disabled based on the CPUID
values that are set for the guest. However, they are still available at a
global level and therefore should be present when KVM_GET_MSRS is sent to
/dev/kvm.
Unfortunately KVM forgot to include those, so fix that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add code to convert the VMX feature words back into MSR values,
allowing the user to enable/disable VMX features as they wish. The same
infrastructure enables support for limiting VMX features in named
CPU models.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These will be used to compile the list of VMX features for named
CPU models, and/or by the code that sets up the VMX MSRs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VMX requires 64-bit feature words for the IA32_VMX_EPT_VPID_CAP
and IA32_VMX_BASIC MSRs. (The VMX control MSRs are 64-bit wide but
actually have only 32 bits of information).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sometimes a CPU feature does not make sense unless another is
present. In the case of VMX features, KVM does not even allow
setting the VMX controls to some invalid combinations.
Therefore, this patch adds a generic mechanism that looks for bits
that the user explicitly cleared, and uses them to remove other bits
from the expanded CPU definition. If these dependent bits were also
explicitly *set* by the user, this will be a warning for "-cpu check"
and an error for "-cpu enforce". If not, then the dependent bits are
cleared silently, for convenience.
With VMX features, this will be used so that for example
"-cpu host,-rdrand" will also hide support for RDRAND exiting.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The next patch will add a different reason for filtering features, unrelated
to host feature support. Extract a new function that takes care of disabling
the features and optionally reporting them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is a problem, that you don't have access to the data using cpu_memory_rw_debug() function when in SMM. You can't remotely debug SMM mode program because of that for example.
Likely attrs version of get_phys_page_debug should be used to get correct asidx at the end to handle access properly.
Here the patch to fix it.
Signed-off-by: Dmitry Poletaev <poletaev@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CPUID bits CLZERO and XSAVEERPTR are availble on AMD's ZEN platform
and could be passed to the guest.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The WHPX build is broken since commit 12e9493df9 which removed the
"hw/boards.h" where MachineState is declared:
$ ./configure \
--enable-hax --enable-whpx
$ make x86_64-softmmu/all
[...]
CC x86_64-softmmu/target/i386/whpx-all.o
target/i386/whpx-all.c: In function 'whpx_accel_init':
target/i386/whpx-all.c:1378:25: error: dereferencing pointer to
incomplete type 'MachineState' {aka 'struct MachineState'}
whpx->mem_quota = ms->ram_size;
^~
make[1]: *** [rules.mak:69: target/i386/whpx-all.o] Error 1
CC x86_64-softmmu/trace/generated-helpers.o
make[1]: Target 'all' not remade because of errors.
make: *** [Makefile:471: x86_64-softmmu/all] Error 2
Restore this header, partially reverting commit 12e9493df9.
Fixes: 12e9493df9
Reported-by: Ilias Maratos <i.maratos@gmail.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190920113329.16787-2-philmd@redhat.com>
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190818225414.22590-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow guest reads CORE cstate when exposing host CPU power management capabilities
to the guest. PKG cstate is restricted to avoid a guest to get the whole package
information in multi-tenant scenario.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1563154124-18579-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Preparation for collapsing the two byte swaps, adjust_endianness and
handle_bswap, along the I/O path.
Target dependant attributes are conditionalized upon NEED_CPU_H.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
Intel CooperLake cpu adds AVX512_BF16 instruction, defining as
CPUID.(EAX=7,ECX=1):EAX[bit 05].
The patch adds a property for setting the subleaf of CPUID leaf 7 in
case that people would like to specify it.
The release spec link as follows,
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf
Signed-off-by: Jing Liu <jing2.liu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prior patch resets can_do_io flag at the TB entry. Therefore there is no
need in resetting this flag at the end of the block.
This patch removes redundant gen_io_end calls.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <156404429499.18669.13404064982854123855.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
The x86 architecture requires that all conversions from floating
point to integer which raise the 'invalid' exception (infinities of
both signs, NaN, and all values which don't fit in the destination
integer) return what the x86 spec calls the "indefinite integer
value", which is 0x8000_0000 for 32-bits or 0x8000_0000_0000_0000 for
64-bits. The softfloat functions return the more usual behaviour of
positive overflows returning the maximum value that fits in the
destination integer format and negative overflows returning the
minimum value that fits.
Wrap the softfloat functions in x86-specific versions which
detect the 'invalid' condition and return the indefinite integer.
Note that we don't use these wrappers for the 3DNow! pf2id and pf2iw
instructions, which do return the minimum value that fits in
an int32 if the input float is a large negative number.
Fixes: https://bugs.launchpad.net/qemu/+bug/1815423
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190805180332.10185-1-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Not the whole structure is initialized before passing it to the KVM.
Reduce the number of Valgrind reports.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <1564502498-805893-4-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Function 'kvm_get_supported_msrs' is only called once
now, get rid of the static variable 'kvm_supported_msrs'.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190725151639.21693-1-liq3ea@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for halt poll control MSR: save/restore, migration
and new feature name.
The purpose of this MSR is to allow the guest to disable
host halt poll.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20190603230408.GA7938@amt.cnet>
[Do not enable by default, as pointed out by Mark Kanda. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
hw/boards.h pulls in almost 60 headers. The less we include it into
headers, the better. As a first step, drop superfluous inclusions,
and downgrade some more to what's actually needed. Gets rid of just
one inclusion into a header.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-23-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-20-armbru@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We declare incomplete struct VMStateDescription in a couple of places
so we don't have to include migration/vmstate.h for the typedef.
That's fine with me. However, the next commit will drop
migration/vmstate.h from a massive number of compiles. Move the
typedef to qemu/typedefs.h now, so I don't have to insert struct in
front of VMStateDescription all over the place then.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-15-armbru@redhat.com>
In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
The main culprit is hw/hw.h, which supposedly includes it for
convenience.
Include sysemu/reset.h only where it's needed. Touching it now
recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-9-armbru@redhat.com>
Some of the generated qapi-types-MODULE.h are included all over the
place. Changing a QAPI type can trigger massive recompiling. Top
scorers recompile more than 1000 out of some 6600 objects (not
counting tests and objects that don't depend on qemu/osdep.h):
6300 qapi/qapi-builtin-types.h
5700 qapi/qapi-types-run-state.h
3900 qapi/qapi-types-common.h
3300 qapi/qapi-types-sockets.h
3000 qapi/qapi-types-misc.h
3000 qapi/qapi-types-crypto.h
3000 qapi/qapi-types-job.h
3000 qapi/qapi-types-block-core.h
2800 qapi/qapi-types-block.h
1300 qapi/qapi-types-net.h
Clean up headers to include generated QAPI headers only where needed.
Impact is negligible except for hw/qdev-properties.h.
This header includes qapi/qapi-types-block.h and
qapi/qapi-types-misc.h. They are used only in expansions of property
definition macros such as DEFINE_PROP_BLOCKDEV_ON_ERROR() and
DEFINE_PROP_OFF_AUTO(). Moving their inclusion from
hw/qdev-properties.h to the users of these macros avoids pointless
recompiles. This is how other property definition macros, such as
DEFINE_PROP_NETDEV(), already work.
Improves things for some of the top scorers:
3600 qapi/qapi-types-common.h
2800 qapi/qapi-types-sockets.h
900 qapi/qapi-types-misc.h
2200 qapi/qapi-types-crypto.h
2100 qapi/qapi-types-job.h
2100 qapi/qapi-types-block-core.h
270 qapi/qapi-types-block.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-3-armbru@redhat.com>
Changing the name to Snowridge from SnowRidge-Server.
There is no client model of Snowridge, so "-Server" is unnecessary.
Removing CPUID_EXT_VMX from Snowridge cpu feature list.
Signed-off-by: Paul Lai <paul.c.lai@intel.com>
Tested-by: Tao3 Xu <tao3.xu@intel.com>
Message-Id: <20190716155808.25010-1-paul.c.lai@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Writing the nested state e.g. after a vmport access can invalidate
important parts of the kernel-internal state, and it is not needed as
well. So leave this out from KVM_PUT_RUNTIME_STATE.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <bdd53f40-4e60-f3ae-7ec6-162198214953@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In these multiline messages, there were typos. Fix them -- add a missing
space and remove a superfluous apostrophe.
Inspired by Tom's patch.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: qemu-trivial@nongnu.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <20190719104118.17735-1-jslaby@suse.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pconfig feature was added in 5131dc433d and removed in 712f807e19.
This patch mark this feature as known to QEMU and removed by
intentinally. This follows the convention of 9ccb9784b5 and f1a23522b0
dealing with 'osxsave' and 'ospke'.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190719111222.14943-1-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not allocate env->nested_state unless we later need to migrate the
nested virtualization state.
With this change, nested_state_needed() will return false if the
VMX flag is not included in the virtual machine. KVM_GET/SET_NESTED_STATE
is also disabled for SVM which is safer (we know that at least the NPT
root and paging mode have to be saved/loaded), and thus the corresponding
subsection can go away as well.
Inspired by a patch from Liran Alon.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previous to this change, a vCPU exposed with VMX running on a kernel
without KVM_CAP_NESTED_STATE or KVM_CAP_EXCEPTION_PAYLOAD resulted in
adding a migration blocker. This was because when the code was written
it was thought there is no way to reliably know if a vCPU is utilising
VMX or not at runtime. However, it turns out that this can be known to
some extent:
In order for a vCPU to enter VMX operation it must have CR4.VMXE set.
Since it was set, CR4.VMXE must remain set as long as the vCPU is in
VMX operation. This is because CR4.VMXE is one of the bits set
in MSR_IA32_VMX_CR4_FIXED1.
There is one exception to the above statement when vCPU enters SMM mode.
When a vCPU enters SMM mode, it temporarily exits VMX operation and
may also reset CR4.VMXE during execution in SMM mode.
When the vCPU exits SMM mode, vCPU state is restored to be in VMX operation
and CR4.VMXE is restored to its original state of being set.
Therefore, when the vCPU is not in SMM mode, we can infer whether
VMX is being used by examining CR4.VMXE. Otherwise, we cannot
know for certain but assume the worse that vCPU may utilise VMX.
Summaring all the above, a vCPU may have enabled VMX in case
CR4.VMXE is set or vCPU is in SMM mode.
Therefore, remove migration blocker and check before migration
(cpu_pre_save()) if the vCPU may have enabled VMX. If true, only then
require relevant kernel capabilities.
While at it, demand KVM_CAP_EXCEPTION_PAYLOAD only when the vCPU is in
guest-mode and there is a pending/injected exception. Otherwise, this
kernel capability is not required for proper migration.
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Tested-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The commit referenced below skipped pinning ram device memory when
ram blocks are added, we need to do the same when they're removed.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Fixes: cedc0ad539 ("target/i386: sev: Do not pin the ram device memory region")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <156320087103.2556.10983987500488190423.stgit@gimli.home>
Reviewed-by: Singh, Brijesh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdH7FgAAoJEL/70l94x66DdUUH+gLr/ZdjLIdfYy9cjcnevf4E
cJlxdaW9KvUsK2uVgqQ/3b1yF+GCGk10n6n8ZTIbClhs+6NpqEMz5O3FA/Na6FGA
48M2DwJaJ2H9AG/lQBlSBNUZfLsEJ9rWy7DHvNut5XMJFuWGwdtF/jRhUm3KqaRq
vAaOgcQHbzHU9W8r1NJ7l6pnPebeO7S0JQV+82T/ITTz2gEBDUkJ36boO6fedkVQ
jLb9nZyG3CJXHm2WlxGO4hkqbLFzURnCi6imOh2rMdD8BCu1eIVl59tD1lC/A0xv
Pp3xXnv9SgJXsV4/I/N3/nU85ZhGVMPQZXkxaajHPtJJ0rQq7FAG8PJMEj9yPe8=
=poke
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Bugfixes.
# gpg: Signature made Fri 05 Jul 2019 21:21:52 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
ioapic: use irq number instead of vector in ioapic_eoi_broadcast
hw/i386: Fix linker error when ISAPC is disabled
Makefile: generate header file with the list of devices enabled
target/i386: kvm: Fix when nested state is needed for migration
minikconf: do not include variables from MINIKCONF_ARGS in config-all-devices.mak
target/i386: fix feature check in hyperv-stub.c
ioapic: clear irq_eoi when updating the ioapic redirect table entry
intel_iommu: Fix unexpected unmaps during global unmap
intel_iommu: Fix incorrect "end" for vtd_address_space_unmap
i386/kvm: Fix build with -m32
checkpatch: do not warn for multiline parenthesized returned value
pc: fix possible NULL pointer dereference in pc_machine_get_device_memory_region_size()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When vCPU is in VMX operation and enters SMM mode,
it temporarily exits VMX operation but KVM maintained nested-state
still stores the VMXON region physical address, i.e. even when the
vCPU is in SMM mode then (nested_state->hdr.vmx.vmxon_pa != -1ull).
Therefore, there is no need to explicitly check for
KVM_STATE_NESTED_SMM_VMXON to determine if it is necessary
to save nested-state as part of migration stream.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190624230514.53326-1-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 2d384d7c8 broken the build when built with:
configure --without-default-devices --disable-user
The reason was the conversion of cpu->hyperv_synic to
cpu->hyperv_synic_kvm_only although the rest of the patch introduces a
feature checking mechanism. So I've fixed the KVM_EXIT_HYPERV_SYNIC in
hyperv-stub to do the same feature check as in the real hyperv.c
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20190624123835.28869-1-alex.bennee@linaro.org>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
find_next_bit() takes a pointer of type "const unsigned long *", but the
first argument passed here is a "uint64_t *". These types are
incompatible when compiling qemu with -m32.
Just use ctz64() instead.
Fixes: c686193072
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190624193913.28343-1-mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new version of Cascadelake-Server CPU model, setting
stepping=5 and enabling the IA32_ARCH_CAPABILITIES MSR
with some flags.
The new feature will introduce a new host software requirement,
breaking our CPU model runnability promises. This means we can't
enable the new CPU model version by default in QEMU 4.1, because
management software isn't ready yet to resolve CPU model aliases.
This is why "pc-*-4.1" will keep returning Cascadelake-Server-v1
if "-cpu Cascadelake-Server" is specified.
Includes a test case to ensure the right combinations of
machine-type + CPU model + command-line feature flags will work
as expected.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-10-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190703221723.8161-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will make unversioned CPU models behavior depend on the
machine type:
* "pc-*-4.0" and older will not report them as aliases.
This is done to keep compatibility with older QEMU versions
after management software starts translating aliases.
* "pc-*-4.1" will translate unversioned CPU models to -v1.
This is done to keep compatibility with existing management
software, that still relies on CPU model runnability promises.
* "none" will translate unversioned CPU models to their latest
version. This is planned become the default in future machine
types (probably in pc-*-4.3).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-8-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The old CPU models will be just aliases for specific versions of
the original CPU models.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-7-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add versions of CPU models that are equivalent to their -IBRS,
-noTSX and -IBRS variants.
The separate variants will eventually be removed and become
aliases for these CPU versions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-6-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add support for registration of multiple versions of CPU models.
The existing CPU models will be registered with a "-v1" suffix.
The -noTSX, -IBRS, and -IBPB CPU model variants will become
versions of the original models in a separate patch, so
make sure we register no versions for them.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-5-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When introducing versioned CPU models, the string at
X86CPUDefinition::model_id might not be the model-id we'll really
use. Instantiate a CPU object and check the model-id property on
"-cpu help"
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-4-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a new option that can be used to disable feature flag
filtering. This will allow CPU model compatibility test cases to
work without host hardware dependencies.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-3-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
SnowRidge CPU supports Accelerator Infrastrcture Architecture (MOVDIRI,
MOVDIR64B), CLDEMOTE and SPLIT_LOCK_DISABLE.
MOVDIRI, MOVDIR64B, and CLDEMOTE are found via CPUID.
The availability of SPLIT_LOCK_DISABLE is check via msr access
References can be found in either:
https://software.intel.com/en-us/articles/intel-sdmhttps://software.intel.com/en-us/download/intel-architecture-instruction-set-extensions-and-future-features-programming-reference
Signed-off-by: Paul Lai <paul.c.lai@intel.com>
Tested-by: Tao3 Xu <tao3.xu@intel.com>
Message-Id: <20190626162129.25345-1-paul.c.lai@intel.com>
[ehabkost: squashed SPLIT_LOCK_DETECT patch]
Message-Id: <20190626163232.25711-1-paul.c.lai@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The CPUID.1F as Intel V2 Extended Topology Enumeration Leaf would be
exposed if guests want to emulate multiple software-visible die within
each package. Per Intel's SDM, the 0x1f is a superset of 0xb, thus they
can be generated by almost same code as 0xb except die_offset setting.
If the number of dies per package is greater than 1, the cpuid_min_level
would be adjusted to 0x1f regardless of whether the host supports CPUID.1F.
Likewise, the CPUID.1F wouldn't be exposed if env->nr_dies < 2.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190620054525.37188-2-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The variable is completely unused, probably a leftover from
previous code clean up.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190625050008.12789-3-ehabkost@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use the same definition as features/user_features in CPUX86State.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190620023746.9869-1-richardw.yang@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
X86CPU.hv-spinlocks is a uint32 property that has a special setter
validating the value to be no less than 0xFFF and no bigger than
UINT_MAX. The latter check is redundant; as for the former, there
appears to be no reason to prohibit the user from setting it to a lower
value.
So nuke the dedicated getter/setter pair and convert 'hv-spinlocks' to a
regular uint32 property.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20190618110659.14744-1-rkagan@virtuozzo.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The current default value for hv-spinlocks is 0xFFFFFFFF (meaning
"never retry"). However, the value is stored as a signed
integer, making the getter of the hv-spinlocks QOM property
return -1 instead of 0xFFFFFFFF.
Fix this by changing the type of X86CPU::hyperv_spinlock_attempts
to uint32_t. This has no visible effect to guest operating
systems, affecting just the behavior of the QOM getter.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190615200505.31348-1-ehabkost@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
If cpu->host_phys_bits_limit is set, QEMU will make
cpu->phys_bits be lower than host_phys_bits on some cases. This
triggers a warning that was supposed to be printed only if
phys-bits was explicitly set in the command-line.
Reorder the code so the value of cpu->phys_bits is validated
before the cpu->host_phys_bits handling. This will avoid
unexpected warnings when cpu->host_phys_bits_limit is set.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190611205420.20286-1-ehabkost@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In new sockets/dies/cores/threads model, the apicid of logical cpu could
imply die level info of guest cpu topology thus x86_apicid_from_cpu_idx()
need to be refactored with #dies value, so does apicid_*_offset().
To keep semantic compatibility, the legacy pkg_offset which helps to
generate CPUIDs such as 0x3 for L3 cache should be mapping to die_offset.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190612084104.34984-5-like.xu@linux.intel.com>
[ehabkost: squash unit test patch]
Message-Id: <20190612084104.34984-6-like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The field die_id (default as 0) and has_die_id are introduced to X86CPU.
Following the legacy smp check rules, the die_id validity is added to
the same contexts as leagcy smp variables such as hmp_hotpluggable_cpus(),
machine_set_cpu_numa_node(), cpu_slot_to_string() and pc_cpu_pre_plug().
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190612084104.34984-4-like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The die-level as the first PC-specific cpu topology is added to the leagcy
cpu topology model, which has one die per package implicitly and only the
numbers of sockets/cores/threads are configurable.
In the new model with die-level support, the total number of logical
processors (including offline) on board will be calculated as:
#cpus = #sockets * #dies * #cores * #threads
and considering compatibility, the default value for #dies would be
initialized to one in x86_cpu_initfn() and pc_machine_initfn().
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190612084104.34984-2-like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The global smp variables in i386 are replaced with smp machine properties.
To avoid calling qdev_get_machine() as much as possible, some related funtions
for acpi data generations are refactored. No semantic changes.
A local variable of the same name would be introduced in the declaration
phase if it's used widely in the context OR replace it on the spot if it's
only used once. No semantic changes.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190518205428.90532-8-like.xu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Commit 2d384d7c8 broken the build when built with:
configure --without-default-devices --disable-user
The reason was the conversion of cpu->hyperv_synic to
cpu->hyperv_synic_kvm_only although the rest of the patch introduces a
feature checking mechanism. So I've fixed the KVM_EXIT_HYPERV_SYNIC in
hyperv-stub to do the same feature check as in the real hyperv.c
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-14-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Move commands query-cpu-definitions, query-cpu-model-baseline,
query-cpu-model-comparison, and query-cpu-model-expansion with their
types from target.json to machine-target.json. Also move types
CpuModelInfo, CpuModelExpansionType, and CpuModelCompareResult from
misc.json there. Add machine-target.json to MAINTAINERS section
"Machine core".
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-13-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[Commit message typo fixed]
Move commands cpu-add, query-cpus, query-cpus-fast,
query-current-machine, query-hotpluggable-cpus, query-machines,
query-memdev, and set-numa-node with their types from misc.json to new
machine.json. Also move types X86CPURegister32 and
X86CPUFeatureWordInfo. Add machine.json to MAINTAINERS section
"Machine core".
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-9-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Previous commits have added support for migration of nested virtualization
workloads. This was done by utilising two new KVM capabilities:
KVM_CAP_NESTED_STATE and KVM_CAP_EXCEPTION_PAYLOAD. Both which are
required in order to correctly migrate such workloads.
Therefore, change code to add a migration blocker for vCPUs exposed with
Intel VMX or AMD SVM in case one of these kernel capabilities is
missing.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Message-Id: <20190619162140.133674-11-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kernel commit c4f55198c7c2 ("kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD")
introduced a new KVM capability which allows userspace to correctly
distinguish between pending and injected exceptions.
This distinguish is important in case of nested virtualization scenarios
because a L2 pending exception can still be intercepted by the L1 hypervisor
while a L2 injected exception cannot.
Furthermore, when an exception is attempted to be injected by QEMU,
QEMU should specify the exception payload (CR2 in case of #PF or
DR6 in case of #DB) instead of having the payload already delivered in
the respective vCPU register. Because in case exception is injected to
L2 guest and is intercepted by L1 hypervisor, then payload needs to be
reported to L1 intercept (VMExit handler) while still preserving
respective vCPU register unchanged.
This commit adds support for QEMU to properly utilise this new KVM
capability (KVM_CAP_EXCEPTION_PAYLOAD).
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-10-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kernel commit 8fcc4b5923af ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE")
introduced new IOCTLs to extract and restore vCPU state related to
Intel VMX & AMD SVM.
Utilize these IOCTLs to add support for migration of VMs which are
running nested hypervisors.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Tested-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-9-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit d98f26073b ("target/i386: kvm: add VMX migration blocker")
added a migration blocker for vCPU exposed with Intel VMX.
However, migration should also be blocked for vCPU exposed with
AMD SVM.
Both cases should be blocked because QEMU should extract additional
vCPU state from KVM that should be migrated as part of vCPU VMState.
E.g. Whether vCPU is running in guest-mode or host-mode.
Fixes: d98f26073b ("target/i386: kvm: add VMX migration blocker")
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-6-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If userspace (QEMU) debug guest, when #DB is raised in guest and
intercepted by KVM, KVM forwards information on #DB to userspace
instead of injecting #DB to guest.
While doing so, KVM don't update vCPU DR6 but instead report the #DB DR6
value to userspace for further handling.
See KVM's handle_exception() DB_VECTOR handler.
QEMU handler for this case is kvm_handle_debug(). This handler basically
checks if #DB is related to one of user set hardware breakpoints and if
not, it re-inject #DB into guest.
The re-injection is done by setting env->exception_injected to #DB which
will later be passed as events.exception.nr to KVM_SET_VCPU_EVENTS ioctl
by kvm_put_vcpu_events().
However, in case userspace re-injects #DB, KVM expects userspace to set
vCPU DR6 as reported to userspace when #DB was intercepted! Otherwise,
KVM_REQ_EVENT handler will inject #DB with wrong DR6 to guest.
Fix this issue by updating vCPU DR6 appropriately when re-inject #DB to
guest.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-5-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simiar to how kvm_init_vcpu() calls kvm_arch_init_vcpu() to perform
arch-dependent initialisation, introduce kvm_arch_destroy_vcpu()
to be called from kvm_destroy_vcpu() to perform arch-dependent
destruction.
This was added because some architectures (Such as i386)
currently do not free memory that it have allocated in
kvm_arch_init_vcpu().
Suggested-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-3-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit d98f26073b ("target/i386: kvm: add VMX migration blocker")
added migration blocker for vCPU exposed with Intel VMX because QEMU
doesn't yet contain code to support migration of nested virtualization
workloads.
However, that commit missed adding deletion of the migration blocker in
case init of vCPU failed. Similar to invtsc_mig_blocker. This commit fix
that issue.
Fixes: d98f26073b ("target/i386: kvm: add VMX migration blocker")
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Message-Id: <20190619162140.133674-2-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MSR IA32_CORE_CAPABILITY is a feature-enumerating MSR, which only
enumerates the feature split lock detection (via bit 5) by now.
The existence of MSR IA32_CORE_CAPABILITY is enumerated by CPUID.7_0:EDX[30].
The latest kernel patches about them can be found here:
https://lkml.org/lkml/2019/4/24/1909
Signed-off-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Message-Id: <20190617153654.916-1-xiaoyao.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V on KVM can only use Synthetic timers with Direct Mode (opting for
an interrupt instead of VMBus message). This new capability is only
announced in KVM_GET_SUPPORTED_HV_CPUID.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-10-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enlightened VMCS is enabled by writing to a field in VP assist page and
these require virtual APIC.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Synthetic timers operate in hv-time time and Windows won't use these
without SynIC.
Add .dependencies field to kvm_hyperv_properties[] and a generic mechanism
to check dependencies between features.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In many case we just want to give Windows guests all currently supported
Hyper-V enlightenments and that's where this new mode may come handy. We
pass through what was returned by KVM_GET_SUPPORTED_HV_CPUID.
hv_cpuid_check_and_set() is modified to also set cpu->hyperv_* flags as
we may want to check them later (and we actually do for hv_runtime,
hv_synic,...).
'hv-passthrough' is a development only feature, a migration blocker is
added to prevent issues while migrating between hosts with different
feature sets.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's consolidate Hyper-V features handling in hyperv_handle_properties().
The change is necessary to support 'hv-passthrough' mode as we'll be just
copying CPUIDs from KVM instead of filling them in.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM now supports reporting supported Hyper-V features through CPUID
(KVM_GET_SUPPORTED_HV_CPUID ioctl). Going forward, this is going to be
the only way to announce new functionality and this has already happened
with Direct Mode stimers.
While we could just support KVM_GET_SUPPORTED_HV_CPUID for new features,
it seems to be beneficial to use it for all Hyper-V enlightenments when
possible. This way we can implement 'hv-all' pass-through mode giving the
guest all supported Hyper-V features even when QEMU knows nothing about
them.
Implementation-wise we create a new kvm_hyperv_properties structure
defining Hyper-V features, get_supported_hv_cpuid()/
get_supported_hv_cpuid_legacy() returning the supported CPUID set and
a bit over-engineered hv_cpuid_check_and_set() which we will also be
used to set cpu->hyperv_* properties for 'hv-all' mode.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Representing Hyper-V properties as bits will allow us to check features
and dependencies between them in a natural way.
Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU tracks whether a vcpu is halted using CPUState::halted. E.g.,
after initialization or reset, halted is 0 for the BSP (vcpu 0)
and 1 for the APs (vcpu 1, 2, ...). A halted vcpu should not be
handed to the hypervisor to run (e.g. hax_vcpu_run()).
Under HAXM, Android Emulator sometimes boots into a "vcpu shutdown
request" error while executing in SeaBIOS, with the HAXM driver
logging a guest triple fault in vcpu 1, 2, ... at RIP 0x3. That is
ultimately because the HAX accelerator asks HAXM to run those APs
when they are still in the halted state.
Normally, the vcpu thread for an AP will start by looping in
qemu_wait_io_event(), until the BSP kicks it via a pair of IPIs
(INIT followed by SIPI). But because the HAX accelerator does not
honor cpu->halted, it allows the AP vcpu thread to proceed to
hax_vcpu_run() as soon as it receives any kick, even if the kick
does not come from the BSP. It turns out that emulator has a
worker thread which periodically kicks every vcpu thread (possibly
to collect CPU usage data), and if one of these kicks comes before
those by the BSP, the AP will start execution from the wrong RIP,
resulting in the aforementioned SMP boot failure.
The solution is inspired by the KVM accelerator (credit to
Chuanxiao Dong <chuanxiao.dong@intel.com> for the pointer):
1. Get rid of questionable logic that unconditionally resets
cpu->halted before hax_vcpu_run(). Instead, only reset it at the
right moments (there are only a few "unhalt" events).
2. Add a check for cpu->halted before hax_vcpu_run().
Note that although the non-Unrestricted Guest (!ug_platform) code
path also forcibly resets cpu->halted, it is left untouched,
because only the UG code path supports SMP guests.
The patch is first merged to android emulator with Change-Id:
I9c5752cc737fd305d7eace1768ea12a07309d716
Cc: Yu Ning <yu.ning@intel.com>
Cc: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Message-Id: <20190610021939.13669-1-colin.xu@intel.com>
This is the common header guard idiom:
/*
* File comment
*/
#ifndef GUARD_SYMBOL_H
#define GUARD_SYMBOL_H
... actual contents ...
#endif
A few of our headers have some #include before the guard.
target/tilegx/spr_def_64.h has #ifndef __DOXYGEN__ outside the guard.
A few more have the #define elsewhere.
Change them to match the common idiom. For spr_def_64.h, that means
dropping #ifndef __DOXYGEN__. While there, rename guard symbols to
make scripts/clean-header-guards.pl happy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604181618.19980-2-armbru@redhat.com>
[Rebased with conflicts resolved automatically]
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in
qemu-common.h. This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.
Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]
i386 (32 bit) emulation uses EFER in wrmsr and in MMU fault
processing.
But it does not included in VMState, because "efer" field is disabled with
This patch adds a section for 32-bit targets which saves EFER when
it's value is non-zero.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <155913371654.8429.1659082639780315242.stgit@pasha-Precision-3630-Tower>
Reviewed-by: Peter Xu <peterx@redhat.com>
[ehabkost: indentation fix]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a "unavailable-features" QOM property to X86CPU objects that
have the same semantics of "unavailable-features" on
query-cpu-definitions. The new property has the same goal of
"filtered-features", but is generic enough to let any kind of CPU
feature to be listed there without relying on low level details
like CPUID leaves or MSR numbers.
Message-Id: <20190422234742.15780-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Extract feature name listing code from
x86_cpu_class_check_missing_features(). It will be reused to
return information about CPU filtered features at runtime.
Message-Id: <20190422234742.15780-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This macro is now always empty, so remove it. This leaves the
entire contents of CPUArchState under the control of the guest
architecture.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Nothing in there so far, but all of the plumbing done
within the target ArchCPU state.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Consolidate some boilerplate from foo_cpu_initfn.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have ArchCPU, we can define this generically,
in the one place that needs it.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace x86_env_get_cpu with env_archcpu. The combination
CPU(x86_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, do this just before including exec/cpu-all.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, do this just before including exec/cpu-all.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, into this new file move TARGET_LONG_BITS,
TARGET_PAGE_BITS, TARGET_PHYS_ADDR_SPACE_BITS,
TARGET_VIRT_ADDR_SPACE_BITS, and NB_MMU_MODES.
Include this new file from exec/cpu-defs.h.
This now removes the somewhat odd requirement that target/arch/cpu.h
defines TARGET_LONG_BITS before including exec/cpu-defs.h, so push the
bulk of the includes within target/arch/cpu.h to the top.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The CPUID.01H:ECX[bit 3] ought to mirror the value of the MSR
IA32_MISC_ENABLE MWAIT bit and as userspace has control of them
both, it is userspace's job to configure both bits to match on
the initial setup.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1557813999-9175-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use qemu_guest_getrandom in aspeed, nrf51, bcm2835, exynos4210 rng devices.
Use qemu_guest_getrandom in target/ppc darn instruction.
Support ARMv8.5-RNG extension.
Support x86 RDRAND extension.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAlzllrsdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9/qAgAuYpF/gHrkfT+IFrw
OsgV1pPdhh+opxp44ayIQ6VC64voij0k/NnmC3/BxRv89yPqchvA6m0c2jzfGuwZ
ICpDt7LvFTrG9k8X9vEXbOTfh5dS/5g1o0LXiGU9RmMaC/5z2ZIabxU8K1Ti3+X0
P3B5s65rRQ8fPzOAMLEjeaHYQ/AOX/CNsmgFDve+d0b9tJY99UVO3Pb0h3+eR0s3
/4AHWG+IACGX7MVgFIfkEbGVnwboNiT20MUq3Exn2yGgg0IbLfoUazOnbfRz9jkX
kbN6nAZ+WDynf31SvvkEL/P6W5medf58ufJOiBB8opIp1E4WDdM30V8RkkPOyj4z
YOBmSw==
=2RnL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-rng-20190522' into staging
Introduce qemu_guest_getrandom.
Use qemu_guest_getrandom in aspeed, nrf51, bcm2835, exynos4210 rng devices.
Use qemu_guest_getrandom in target/ppc darn instruction.
Support ARMv8.5-RNG extension.
Support x86 RDRAND extension.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
# gpg: Signature made Wed 22 May 2019 19:36:43 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-rng-20190522: (25 commits)
target/i386: Implement CPUID_EXT_RDRAND
target/ppc: Use qemu_guest_getrandom for DARN
target/ppc: Use gen_io_start/end around DARN
target/arm: Implement ARMv8.5-RNG
target/arm: Put all PAC keys into a structure
hw/misc/exynos4210_rng: Use qemu_guest_getrandom
hw/misc/bcm2835_rng: Use qemu_guest_getrandom_nofail
hw/misc/nrf51_rng: Use qemu_guest_getrandom_nofail
aspeed/scu: Use qemu_guest_getrandom_nofail
linux-user: Remove srand call
linux-user/aarch64: Use qemu_guest_getrandom for PAUTH keys
linux-user: Use qemu_guest_getrandom_nofail for AT_RANDOM
linux-user: Call qcrypto_init if not using -seed
linux-user: Initialize pseudo-random seeds for all guest cpus
cpus: Initialize pseudo-random seeds for all guest cpus
util: Add qemu_guest_getrandom and associated routines
ui/vnc: Use gcrypto_random_bytes for start_auth_vnc
ui/vnc: Split out authentication_failed
crypto: Change the qcrypto_random_bytes buffer type to void*
crypto: Use getrandom for qcrypto_random_bytes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We now have an interface for guest visible random numbers.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Microarchitectural Data Sampling is a hardware vulnerability which allows
unprivileged speculative access to data which is available in various CPU
internal buffers.
Some Intel processors use the ARCH_CAP_MDS_NO bit in the
IA32_ARCH_CAPABILITIES
MSR to report that they are not vulnerable, make it available to guests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190516185320.28340-1-pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
md-clear is a new CPUID bit which is set when microcode provides the
mechanism to invoke a flush of various exploitable CPU buffers by invoking
the VERW instruction.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190515141011.5315-2-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
"megasas: fix mapped frame size" from Peter Lieven.
In addition, -realtime is marked as deprecated.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJc3rY3AAoJEL/70l94x66D91kH/21LLnL+sKmyueSM/Sek4id2
r06tHdGMdl5Od3I5uMD9gnr4AriiCZc9ybQDQ1N879wKMmQPZwcnf2GJ5DZ0wa3L
jHoQO07Bg0KZGWALjXiN5PWB0DlJtXsTm0C4q4tnt6V/ueasjxouBk9/fRLRc09n
QTS379X9QvPElFTv3WPfGz6kmkLq8VMmdRnSlXneB9xTyXXJbFj3zlvDCElNSgWh
fZ7gnfYWB1LOC19HJxp1mJSkAUD5AgImYEK1Hmnr+BMs2sg6gypYNtp3LtE5FzmZ
HSdXYFyPkQV9UyTiV1XBs3bXJbGYj5OApfXCtwo/I2JtP+LhHBA2eq1Gs3QgP98=
=zSSj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Mostly bugfixes and cleanups, the most important being
"megasas: fix mapped frame size" from Peter Lieven.
In addition, -realtime is marked as deprecated.
# gpg: Signature made Fri 17 May 2019 14:25:11 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (21 commits)
hw/net/ne2000: Extract the PCI device from the chipset common code
hw/char: Move multi-serial devices into separate file
ioapic: allow buggy guests mishandling level-triggered interrupts to make progress
build: don't build hardware objects with linux-user
build: chardev is only needed for softmmu targets
configure: qemu-ga is only needed with softmmu targets
build: replace GENERATED_FILES by generated-files-y
trace: only include trace-event-subdirs when they are needed
sun4m: obey -vga none
mips-fulong2e: obey -vga none
hw/i386/acpi: Assert a pointer is not null BEFORE using it
hw/i386/acpi: Add object_resolve_type_unambiguous to improve modularity
hw/acpi/piix4: Move TYPE_PIIX4_PM to a public header
memory: correct the comment to DIRTY_MEMORY_MIGRATION
vl: fix -sandbox parsing crash when seccomp support is disabled
hvf: Add missing break statement
megasas: fix mapped frame size
vl: Add missing descriptions to the VGA adapters list
Declare -realtime as deprecated
roms: assert if max rom size is less than the used size
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In target/i386/hvf/hvf.c, a break statement was probably missing in
`hvf_vcpu_exec()`, in handling EXIT_REASON_HLT.
These lines seemed to be equivalent to `kvm_handle_halt()`.
Signed-off-by: Chen Zhang <tgfbeta@me.com>
Message-Id: <087F1D9C-109D-41D1-BE2C-CE5D840C981B@me.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Improve tlb_vaddr_to_host for use by ARM SVE no-fault loads.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAlzVx4UdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+U1Af/b3cV5d5a1LWRdLgR
71JCPK/M3o43r2U9wCSikteXkmNBEdEoc5+WRk2SuZFLW/JB1DHDY7/gISPIhfoB
ZIza2TxD/QK1CQ5/mMWruKBlyygbYYZgsYaaNsMJRJgicgOSjTN0nuHMbIfv3tAN
mu+IlkD0LdhVjP0fz30Jpew3b3575RCjYxEPM6KQI3RxtQFjZ3FhqV5hKR4vtdP5
yLWJQzwAbaCB3SZUvvp7TN1ZsmeyLpc+Yz/YtRTqQedo7SNWWBKldLhqq4bZnH1I
AkzHbtWIOBrjWJ34ZMAgI5Q56Du9TBbBvCdM9azmrQjSu/2kdsPBPcUyOpnUCsCx
NyXo9g==
=x71l
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190510' into staging
Add CPUClass::tlb_fill.
Improve tlb_vaddr_to_host for use by ARM SVE no-fault loads.
# gpg: Signature made Fri 10 May 2019 19:48:37 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20190510: (27 commits)
tcg: Use tlb_fill probe from tlb_vaddr_to_host
tcg: Remove CPUClass::handle_mmu_fault
tcg: Use CPUClass::tlb_fill in cputlb.c
target/xtensa: Convert to CPUClass::tlb_fill
target/unicore32: Convert to CPUClass::tlb_fill
target/tricore: Convert to CPUClass::tlb_fill
target/tilegx: Convert to CPUClass::tlb_fill
target/sparc: Convert to CPUClass::tlb_fill
target/sh4: Convert to CPUClass::tlb_fill
target/s390x: Convert to CPUClass::tlb_fill
target/riscv: Convert to CPUClass::tlb_fill
target/ppc: Convert to CPUClass::tlb_fill
target/openrisc: Convert to CPUClass::tlb_fill
target/nios2: Convert to CPUClass::tlb_fill
target/moxie: Convert to CPUClass::tlb_fill
target/mips: Convert to CPUClass::tlb_fill
target/mips: Tidy control flow in mips_cpu_handle_mmu_fault
target/mips: Pass a valid error to raise_mmu_exception for user-only
target/microblaze: Convert to CPUClass::tlb_fill
target/m68k: Convert to CPUClass::tlb_fill
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-7-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Changes to slirp/ dropped, as we're about to spin it off]
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-6-armbru@redhat.com>
[Rebase to master: update include/hw/net/ne2000-isa.h]
We can now use the CPUClass hook instead of a named function.
Create a static tlb_fill function to avoid other changes within
cputlb.c. This also isolates the asserts within. Remove the
named tlb_fill function from all of the targets.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not support probing, but we do not need it yet either.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a new base CPU model called 'Dhyana' to model processors from Hygon
Dhyana(family 18h), which derived from AMD EPYC(family 17h).
The following features bits have been removed compare to AMD EPYC:
aes, pclmulqdq, sha_ni
The Hygon Dhyana support to KVM in Linux is already accepted upstream[1].
So add Hygon Dhyana support to Qemu is necessary to create Hygon's own
CPU model.
Reference:
[1] https://git.kernel.org/tip/fec98069fb72fb656304a3e52265e0c2fc9adf87
Signed-off-by: Pu Wen <puwen@hygon.cn>
Message-Id: <1555416373-28690-1-git-send-email-puwen@hygon.cn>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In order to handle TB's that translate to too much code, we
need to place the control of the length of the translation
in the hands of the code gen master loop.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().
The callback gets passed around a lot, which is tiresome. The
type-punning around monitor_fprintf() is ugly.
Drop the callback, and call qemu_fprintf() instead. Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
x86_cpu_dump_local_apic_state() takes an fprintf()-like callback and a
FILE * to pass to it, and so do its helper functions.
Its only caller hmp_info_local_apic() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-12-armbru@redhat.com>
The various TARGET_cpu_list() take an fprintf()-like callback and a
FILE * to pass to it. Their callers (vl.c's main() via list_cpus(),
bsd-user/main.c's main(), linux-user/main.c's main()) all pass
fprintf() and stdout. Thus, the flexibility provided by the (rather
tiresome) indirection isn't actually used.
Drop the callback, and call qemu_printf() instead.
Calling printf() would also work, but would make the code unsuitable
for monitor context without making it simpler.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-10-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix a TCG crash due to attempting an atomic increment
operation without having set up the address first.
This is a similar case to that dealt with in commit
e84fcd7f66, and we fix it in the same way.
Fixes: https://bugs.launchpad.net/qemu/+bug/1807675
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20190328104750.25046-1-peter.maydell@linaro.org
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, the Cascadelake-Server, Icelake-Client, and
Icelake-Server are always generating the following warning:
qemu-system-x86_64: warning: \
host doesn't support requested feature: CPUID.07H:ECX [bit 4]
This happens because OSPKE was never returned by
GET_SUPPORTED_CPUID or x86_cpu_get_supported_feature_word().
OSPKE is a runtime flag automatically set by the KVM module or by
TCG code, was always cleared by x86_cpu_filter_features(), and
was not supposed to appear on the CPU model table.
Remove the OSPKE flag from the CPU model table entries, to avoid
the bogus warning and avoid returning invalid feature data on
query-cpu-* QMP commands. As OSPKE was always cleared by
x86_cpu_filter_features(), this won't have any guest-visible
impact.
Include a test case that should detect the problem if we introduce
a similar bug again.
Fixes: c7a88b52f6 ("i386: Add new model of Cascadelake-Server")
Fixes: 8a11c62da9 ("i386: Add new CPU model Icelake-{Server,Client}")
Cc: Tao Xu <tao3.xu@intel.com>
Cc: Robert Hoo <robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190319200515.14999-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Now that kvm_arch_get_supported_cpuid() will only return
arch_capabilities if QEMU is able to initialize the MSR properly,
we know that the feature is safely migratable.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190125220606.4864-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
KVM has two bugs in the handling of MSR_IA32_ARCH_CAPABILITIES:
1) Linux commit commit 1eaafe91a0df ("kvm: x86: IA32_ARCH_CAPABILITIES
is always supported") makes GET_SUPPORTED_CPUID return
arch_capabilities even if running on SVM. This makes "-cpu
host,migratable=off" incorrectly expose arch_capabilities on CPUID on
AMD hosts (where the MSR is not emulated by KVM).
2) KVM_GET_MSR_INDEX_LIST does not return MSR_IA32_ARCH_CAPABILITIES if
the MSR is not supported by the host CPU. This makes QEMU not
initialize the MSR properly at kvm_put_msrs() on those hosts.
Work around both bugs on the QEMU side, by checking if the MSR
was returned by KVM_GET_MSR_INDEX_LIST before returning the
feature flag on kvm_arch_get_supported_cpuid().
This has the unfortunate side effect of making arch_capabilities
unavailable on hosts without hardware support for the MSR until bug #2
is fixed on KVM, but I can't see another way to work around bug #1
without that side effect.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190125220606.4864-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The RAM device presents a memory region that should be handled
as an IO region and should not be pinned.
In the case of the vfio-pci, RAM device represents a MMIO BAR
and the memory region is not backed by pages hence
KVM_MEMORY_ENCRYPT_REG_REGION fails to lock the memory range.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1667249
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20190204222322.26766-3-brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel Processor Trace required CPUID[0x14] but the cpuid_level
have no change when create a kvm guest with
e.g. "-cpu qemu64,+intel-pt".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Message-Id: <1548805979-12321-1-git-send-email-luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CPUID code will call kvm_arch_get_supported_cpuid() and, even though
it is undef kvm_enabled() so it never runs for user-mode emulators,
sometimes clang will not optimize it out at -O0.
That could be considered a compiler bug, however at -O0 we give it
a pass and just add the stubs.
Reported-by: Kamil Rytarowski <n54@gmx.com>
Tested-by: Kamil Rytarowski <n54@gmx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move rtc-reset-reinjection and SEV in target.json and make them
conditional on TARGET_I386.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190214152251.2073-10-armbru@redhat.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The machine that with hvf accelerator and smp sometimes boot hangs
because all processors are executing instructions at startup,
including early I/O emulations. We should just allow the bootstrap
processor to initialize the machine and then to wake up slave
processors by interrupt.
Signed-off-by: Heiher <r@hev.cc>
Message-Id: <20190123073402.28465-1-r@hev.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The machine description we send is being (silently) thrown on the floor
by GDB and GDB silently uses the default machine description, because
the xml parse fails on <feature> nested within <feature>.
Changes to the xml in qemu source code have no effect.
In addition, the default machine description has fs_base, which fails to
be retrieved, which breaks the whole register window. Add it and the
other control registers.
Signed-off-by: Doug Gale <doug16k@gmail.com>
Message-Id: <20190124040457.2546-1-doug16k@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In 16-bit addressing mode, when Mod = 0 and R/M = 6, decoded displacement
doesn't reach decode_linear_addr and gets lost. Instructions that
involve the combination of ModRM always get a pointer with zero offset
from the beginning of DS segment.
The change fixes drawing in F-BIRD from day 1 of '18 advent calendar.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20190125154743.14498-1-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MPX support is being phased out by Intel and actually I am not sure that
OS X has ever enabled it in XCR0. Drop it from the Hypervisor.framework
acceleration.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 5131dc433d.
For new instruction 'PCONFIG' will not be exposed to guest.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1545227081-213696-3-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Processor tracing is not yet implemented for KVM and it will be an
opt in feature requiring a special module parameter.
Disable it, because it is wrong to enable it by default and
it is impossible that no one has ever used it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PCONFIG is not available to guests; it must be specifically enabled
using the PCONFIG_ENABLE execution control. Disable it, because
no one can ever use it.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1545227081-213696-2-git-send-email-robert.hu@linux.intel.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
