Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200304155932.20452-2-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Move vl.c to a separate directory, similar to linux-user/
Update the chechpatch and get_maintainer scripts, since they relied on
/vl.c for top_of_tree checks.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-2-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use an explicit boolean type.
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The address_space_rw() function allows either reads or writes
depending on the is_write argument passed to it; this is useful
when the direction of the access is determined programmatically
(as for instance when handling the KVM_EXIT_MMIO exit reason).
Under the hood it just calls either address_space_write() or
address_space_read_full().
We also use it a lot with a constant is_write argument, though,
which has two issues:
* when reading "address_space_rw(..., 1)" this is less
immediately clear to the reader as being a write than
"address_space_write(...)"
* calling address_space_rw() bypasses the optimization
in address_space_read() that fast-paths reads of a
fixed length
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.cocci.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200218112457.22712-1-peter.maydell@linaro.org>
[PMD: Update macvm_set_cr0() reported by Laurent Vivier]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Since its introduction in commit ac1970fbe8, address_space_rw()
takes a boolean 'is_write' argument. Fix the codebase by using
an explicit boolean type.
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Two lines in hw/net/dp8393x.c that Coccinelle produced that
were over 80 characters were re-wrapped by hand.
Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The NetReceive prototype gets a const buffer:
typedef ssize_t (NetReceive)(NetClientState *, const uint8_t *, size_t);
We already have the address_space_write() method to write a const
buffer to an address space. Use it to avoid:
hw/net/i82596.c: In function ‘i82596_receive’:
hw/net/i82596.c:644:54: error: passing argument 4 of ‘address_space_rw’ discards ‘const’ qualifier from pointer target type [-Werror=discarded-qualifiers]
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Since its introduction in commit d86a77f8ab, dma_memory_read()
always accepted void pointer argument. Remove the unnecessary
casts.
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
v4: Drop parenthesis when removing cast (Eric Blake)
When we use a Coccinelle semantic script to do automatic
code modifications, it makes sense to look at the semantic
patch first.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* fixes for the ucode revision patch from the previous pull request
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeRBoQAAoJEL/70l94x66DYOUIAJKM5PDAhOkJpSqoSz2mMVJN
IOq2YhmbQHSVojUDCUEFnKd2Zja858vsOoAslgce0nbgj+ZNn9WZEVIKeHqkW6cg
gWybMy1deT5o0U05e6/EIL0id8N5FVMLdUZRdGCFk4qtILFa1kRYJmlwNOMxSVkB
MSwOy60//+po6lW0WSKD2aTf9qVvZJOQjZozqFrGlIPG/SnqrPZCMRxR/XIrrJuF
GZZyiAsRXFU1mabr7HafdUj+MYf0DWSvATmihz4wsI/LlXx712uVm9eZ48Rc6PyF
wEKh17/2bVPoL1g9OeTKYnX9aKt/7C0D98n3W0foG3IpzZzPLX4NaNKPihb5n7I=
=VlyM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* various small fixes and cleanups
* fixes for the ucode revision patch from the previous pull request
# gpg: Signature made Wed 12 Feb 2020 15:30:24 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
target/i386: enable monitor and ucode revision with -cpu max
target/i386: check for availability of MSR_IA32_UCODE_REV as an emulated MSR
target/i386: fix TCG UCODE_REV access
build: move TARGET_GPROF to config-host.mak
exec: do not define use_icount for user-mode emulation
minikconf: accept alnum identifiers
Remove support for CLOCK_MONOTONIC not being defined
seqlock: fix seqlock_write_unlock_impl function
vl: Don't mismatch g_strsplit()/g_free()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If one is compiling more than one tree from the same source, it is
possible that they need different submodules. Change the check to see
that all modules that we are interested in are updated, discarding the
ones that we don't care about.
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
v1->v2:
patchw insists in not using modules
This is only needed for Python 2, which we do not support anymore.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200204160604.19883-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Scripts that have a Python shebang are meant to be executed directly from the
shell; give them 755 permissions.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200204160237.16889-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200204160028.16211-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -lF '#!/usr/bin/env python' \
| xargs grep -L 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-12-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use the program search path to find the Python 3 interpreter.
Patch created manually after running:
$ git grep -l 'if __name__.*__main__' \
| xargs grep -LF '#!/usr/bin/env python3'
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-7-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -l 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-6-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Since commit ddf9069963 QEMU requires Python >= 3.5.
PEP 0394 [*] states that 'python3' should be available and
that 'python' is optional.
To avoid problem with unsupported versions, enforce the
shebang interpreter to Python 3.
[*] https://www.python.org/dev/peps/pep-0394/
Reported-by: John Snow <jsnow@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-2-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The qemu-trace-stap documentation is currently in
scripts/qemu-trace-stap.texi in Texinfo format, which we
present to the user as:
* a qemu-trace-stap manpage
* but not (unusually for QEMU) part of the HTML docs
Convert the documentation to rST format that lives in
the docs/ subdirectory, and present it to the user as:
* a qemu-trace-stap manpage
* part of the interop/ Sphinx manual
There are minor formatting changes to suit Sphinx, but no
content changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200124162606.8787-8-peter.maydell@linaro.org
We want to add support for including rST document fragments
in our .hx files, in the same way we currently have texinfo
fragments. These will be delimited by SRST and ERST directives,
in the same way the texinfo is delimited by STEXI/ETEXI.
The rST fragments will not be extracted by the hxtool
script, but by a different mechanism, so all we need to
do in hxtool is have it ignore all the text inside a
SRST/ERST section, with suitable error-checking for
mismatched rST-vs-texi fragment delimiters.
The resulting effective state machine has only three states:
* flag = 0, rstflag = 0 : reading section for C output
* flag = 1, rstflag = 0 : reading texi fragment
* flag = 0, rstflag = 1 : reading rST fragment
and flag = 1, rstflag = 1 is not possible. Using two
variables makes the parallel between the rST handling and
the texi handling clearer; in any case all this code will
be deleted once we've converted entirely to rST.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200124162606.8787-3-peter.maydell@linaro.org
Update scripts/update-linux-headers.sh to add fuse.h and
use it to pull in fuse.h from the kernel; from v5.5-rc1
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
To avoid scrolling each instruction when reviewing tcg
helpers written for the decodetree script, display the
.decode files (similar to header declarations) before
the C source (implementation of previous declarations).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191230082856.30556-1-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Recent commit 3e7fb5811b "qapi: Fix code generation for empty modules"
modules" switched QAPISchema.visit() from
for entity in self._entity_list:
effectively to
for mod in self._module_dict.values():
for entity in mod._entity_list:
Visits in the same order as long as .values() is in insertion order.
That's the case only for Python 3.6 and later. Before, it's in some
arbitrary order, which results in broken generated code.
Fix by making self._module_dict an OrderedDict rather than a dict.
Fixes: 3e7fb5811b
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200116202558.31473-1-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since the previous commit, QAPISchemaVisitor.visit_module() is called
just once. Simplify QAPISchemaModularCVisitor accordingly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-7-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When a sub-module doesn't contain any definitions, we don't generate
code for it, but we do generate the #include.
We generate code only for modules that get visited.
QAPISchema.visit() visits only modules that have definitions. It can
visit modules multiple times.
Clean this up as follows. Collect entities in their QAPISchemaModule.
Have QAPISchema.visit() call QAPISchemaModule.visit() for each module.
Have QAPISchemaModule.visit() call .visit_module() for itself, and
QAPISchemaEntity.visit() for each of its entities. This way, we visit
each module exactly once.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-6-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Modules are represented only by their names so far. Introduce class
QAPISchemaModule. So far, it merely wraps the name. The next patch
will put it to more interesting use.
Once again, arrays spice up the patch a bit. For any other type,
@info points to the definition, which lets us map from @info to
module. For arrays, there is no definition, and @info points to the
first use instead. We have to use the element type's module instead,
which is only available after .check().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Having to include qapi-commands.h just for qmp_init_marshal() is
suboptimal. Generate it into separate files. This lets
monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h
include less.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-4-armbru@redhat.com>
[Typos in docs/devel/qapi-code-gen.txt fixed]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-trace-stap does not support Python 3 yet:
$ scripts/qemu-trace-stap list path/to/qemu-system-x86_64
Traceback (most recent call last):
File "scripts/qemu-trace-stap", line 175, in <module>
main()
File "scripts/qemu-trace-stap", line 171, in main
args.func(args)
File "scripts/qemu-trace-stap", line 118, in cmd_list
print_probes(args.verbose, "*")
File "scripts/qemu-trace-stap", line 114, in print_probes
if line.startswith(prefix):
TypeError: startswith first arg must be bytes or a tuple of bytes, not str
Now that QEMU requires Python 3.5 or later we can switch to pure Python
3. Use Popen()'s universal_newlines=True argument to treat stdout as
text instead of binary.
Fixes: 62dd1048c0 ("trace: add ability to do simple printf logging via systemtap")
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1787395
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20200107112438.383958-1-stefanha@redhat.com
Message-Id: <20200107112438.383958-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Surprisingly, QEMU does have a pretty consistent doc comment style and
it is not very different from the Linux kernel's. Of the documentation
"sigils", only "#" separates the QEMU doc comment style from Linux's,
and it has 200+ instances vs. 6 for the kernel's '&struct foo' (all in
accel/tcg/translate-all.c), so it's clear that the two standards are
different in this respect. In addition, our structs are typedefed and
recognized by CamelCase names.
Adjust kernel-doc's parser for these two aspects of the QEMU coding
standards. The patch has been valid, with hardly any change, for over
two years, so it should not be an issue to keep kernel-doc in sync with
the Linux copy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Import Linux's kernel-doc script as of commit 15e2544ed38a1e, as well
as the Sphinx extension to call kernel-doc according to the arguments
and parameters given to a reStructuredText directive.
The kernel-doc extension accepts a filename, which is relative to
the QEMU source tree root. The extension also notifies Sphinx about the
document dependency on the file, causing the document to be rebuilt when
the file has been changed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Traceback (most recent call last):
File "../scripts/analyze-migration.py", line 611, in <module>
dump.read(desc_only = True)
File "../scripts/analyze-migration.py", line 513, in read
self.load_vmsd_json(file)
File "../scripts/analyze-migration.py", line 556, in load_vmsd_json
vmsd_json = file.read_migration_debug_json()
File "../scripts/analyze-migration.py", line 89, in read_migration_debug_json
nulpos = data.rfind("\0")
TypeError: argument should be integer or bytes-like object, not 'str'
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191127101038.327080-2-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Python 3.7.5 on f31 doesn't seem to like the old type=file syntax
on argparse.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191121185303.51685-1-dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Recent git versions support worktrees where .git is not a directory but
a file with a path to the .git repository; however the get_maintainer.pl
script only recognises the .git directory, let's fix it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20191112034532.69079-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'the' has a tendency to double up; squash them back down.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191104185202.102504-1-dgilbert@redhat.com>
[lv: removed disas/libvixl/vixl/invalset.h change]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also note that we were missing the qemu_target_list entry
for plain sparc; fix that at the same time.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191106113318.10226-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit f3ed93d545 "qapi: Allow documentation for features" neglected
to check documentation against the schema. Fix that: check them the
same way we check arguments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-20-armbru@redhat.com>
Improve error messages from
the following documented members are not in the declaration: a
the following documented members are not in the declaration: aa, bb
to the more concise
documented member 'a' does not exist
documented members 'aa', 'bb' do not exist
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-19-armbru@redhat.com>
Commit 6a8c0b5102 "qapi: Add feature flags to struct types" added
features to QAPISchemaObjectType. Commit a95daa5093 "qapi: Add
feature flags to commands in qapi" added them to QAPISchemaCommand,
duplicating the code. Tolerable, but the duplication will only get
worse as we add features to more definitions.
To de-duplicate, lift features from QAPISchemaObjectType and
QAPISchemaCommand into QAPISchemaEntity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-18-armbru@redhat.com>
check_features() is always called together with normalize_features().
Fold the latter into the former.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-17-armbru@redhat.com>
check_features() is always called together with normalize_features():
the former in check_struct() and check_command(), the latter in their
caller check_exprs(). Fold the latter into the former.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-16-armbru@redhat.com>
check_if() is always called together with normalize_if(). Fold the
latter into the former.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-15-armbru@redhat.com>
All sub-classes of QAPISchemaEntity now override .check_doc() the same
way, except for QAPISchemaType and and QAPISchemaArrayType.
Put the overrides' code in QAPISchemaEntity.check_doc(), and drop the
overrides. QAPISchemaType doesn't care because it's abstract.
QAPISchemaArrayType doesn't care because its .doc is always None.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-14-armbru@redhat.com>
All callers now pass doc=None. Drop the argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-13-armbru@redhat.com>
When a command's 'data' is an object, its doc comment describes the
arguments defined there. When 'data' names a type, the doc comment
does not describe arguments. Instead, the doc generator inserts a
pointer to the named type.
An event's doc comment works the same.
We don't actually check doc comments for commands and events.
Instead, QAPISchema._def_command() forwards the doc comment to the
implicit argument type, where it gets checked. Works because the
check only cares for the implicit argument type's members.
Not only is this needlessly hard to understand, it actually falls
apart in two cases:
* When 'data' is empty, there is nothing to forward to, and the doc
comment remains unchecked. Demonstrated by test doc-bad-event-arg.
* When 'data' names a type, we can't forward, as the type has its own
doc comment. The command or event's doc comment remains unchecked.
Demonstrated by test doc-bad-boxed-command-arg.
The forwarding goes back to commit 069fb5b250 "qapi: Prepare for
requiring more complete documentation", put to use in commit
816a57cd6e "qapi: Fix detection of bogus member documentation". That
fix was incomplete.
To fix this, make QAPISchemaCommand and QAPISchemaEvent check doc
comments, and drop the forwarding of doc comments to implicit argument
types.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-12-armbru@redhat.com>
An object type's doc comment describes the type's members, less the
ones defined in a named base type. Cases:
* Struct: the members are defined in 'data' and inherited from 'base'.
Since the base type cannot be implicit, the doc comment describes
just 'data'.
* Simple union: the only member is the implicit tag member @type, and
the doc comment describes it.
* Flat union with implicit base type: the members are defined in
'base', and the doc comment describes it.
* Flat union with named base type: the members are inherited from
'base'. The doc comment describes no members.
Before we can check a doc comment with .check_doc(), we need
.connect_doc() connect each of its "argument sections" to the member
it documents.
For structs and simple unions, this is straightforward: the members in
question are in .local_members, and .connect_doc() connects them.
For flat unions with a named base type, it's trivial: .local_members
is empty, and .connect_doc() does nothing.
For flat unions with an implicit base type, it's tricky. We have
QAPISchema._make_implicit_object_type() forward the union's doc
comment to the implicit base type, so that the base type's
.connect_doc() connects the members. The union's .connect_doc() does
nothing, as .local_members is empty.
Dirt effect: we check the doc comment twice, once for the union type,
and once for the implicit base type.
This is needlessly brittle and hard to understand. Clean up as
follows. Make the union's .connect_doc() connect an implicit base's
members itself. Do not forward the union's doc comment to its
implicit base type.
Requires extending .connect_doc() so it can work with a doc comment
other than self.doc. Add an optional argument for that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-11-armbru@redhat.com>
Enumeration type documentation comments are not checked, as
demonstrated by test doc-bad-enum-member. This is because we neglect
to call self.doc.check() for enumeration types. Messed up in
816a57cd6e "qapi: Fix detection of bogus member documentation". Fix
it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-10-armbru@redhat.com>
Splitting documentation checking off the .check() methods makes them a
bit more focused, which is welcome, as some of them are pretty big.
It also prepares the ground for the following commits.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-9-armbru@redhat.com>
QAPISchemaGenDocVisitor.visit_command() duplicates texi_entity() for
its boxed arguments case. The previous commit added another copy in
.visit_event().
Replace texi_entity() by texi_type() and texi_msg(). Use texi_msg()
for the boxed arguments case as well.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-8-armbru@redhat.com>
Generate a reference "Arguments: the members of ...", just like we do
for commands since commit c2dd311cb7 "qapi2texi: Implement boxed
argument documentation".
No change to generated QMP documentation; we don't yet use boxed
events outside tests/.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191024110237.30963-7-armbru@redhat.com>
It's quite common to have a mini comment inside braces to acknowledge
we know it's empty. Expand the inline detection to allow closing
braces before the end of line.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aaron Lindsay <aaron@os.amperecomputing.com>
We are going to re-use mem_info later for plugins and will need to
track the mmu_idx for softmmu code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
CC: Richard Henderson <richard.henderson@linaro.org>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191017004633.13229-1-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similarly to features for struct types introduce the feature flags also
for commands. This will allow notifying management layers of fixes and
compatible changes in the behaviour of a command which may not be
detectable any other way.
The changes were heavily inspired by commit 6a8c0b5102.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191018081454.21369-3-armbru@redhat.com>
Commit fbf09a2fa4 "qapi: add 'ifcond' to visitor methods" brought back
the executable bits. Fix that. Drop the #! line for good measure.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-8-armbru@redhat.com>
The QAPI code generator clocks in at some 3100 SLOC in 8 source files.
Almost 60% of the code is in qapi/common.py. Split it into more
focused modules:
* Move QAPISchemaPragma and QAPISourceInfo to qapi/source.py.
* Move QAPIError and its sub-classes to qapi/error.py.
* Move QAPISchemaParser and QAPIDoc to parser.py. Use the opportunity
to put QAPISchemaParser first.
* Move check_expr() & friends to qapi/expr.py. Use the opportunity to
put the code into a more sensible order.
* Move QAPISchema & friends to qapi/schema.py
* Move QAPIGen and its sub-classes, ifcontext,
QAPISchemaModularCVisitor, and QAPISchemaModularCVisitor to qapi/gen.py
* Delete camel_case(), it's unused since commit e98859a9b9 "qapi:
Clean up after recent conversions to QAPISchemaVisitor"
A number of helper functions remain in qapi/common.py. I considered
moving the code generator helpers to qapi/gen.py, but decided not to.
Perhaps we should rewrite them as methods of QAPIGen some day.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-7-armbru@redhat.com>
[Add "# -*- coding: utf-8 -*-" lines]
The next commit will split up qapi/common.py. gen_enum() needs
QAPISchemaEnumMember, and that's in the way. Move it to qapi/types.py
along with its buddy gen_enum_lookup().
Permit me a short a digression on history: how did gen_enum() end up
in qapi/common.py? Commit 21cd70dfc1 "qapi script: add event support"
duplicated qapi-types.py's gen_enum() and gen_enum_lookup() in
qapi-event.py. Simply importing them would have been cleaner, but
wasn't possible as qapi-types.py was a program, not a module. Commit
efd2eaa6c2 "qapi: De-duplicate enum code generation" de-duplicated by
moving them to qapi.py, which was a module.
Since then, program qapi-types.py has morphed into module types.py.
It's where gen_enum() and gen_enum_lookup() started, and where they
belong.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-6-armbru@redhat.com>
The frontend can't be run more than once due to its global state.
A future commit will want to do that.
The only global frontend state remaining is accidental:
QAPISchemaParser.__init__()'s parameter previously_included=[].
Python evaluates the default once, at definition time. Any
modifications to it are visible in subsequent calls. Well-known
Python trap. Change the default to None and replace it by the real
default in the function body. Use the opportunity to convert
previously_included to a set.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-4-armbru@redhat.com>
The frontend can't be run more than once due to its global state.
A future commit will want to do that.
Recent commit "qapi: Move context-sensitive checking to the proper
place" got rid of many global variables already, but pragma state is
still stored in global variables (that's why a pragma directive's
scope is the complete schema).
Move the pragma state to QAPISourceInfo.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-3-armbru@redhat.com>
Commit bc52d03ff5 "qapi: Make doc comments optional where we don't
need them" made scripts/qapi2texi.py fail[*] unless the schema had
pragma 'doc-required': true. The stated reason was inability to cope
with incomplete documentation.
When commit fb0bc835e5 "qapi-gen: New common driver for code and doc
generators" folded scripts/qapi2texi.py into scripts/qapi-gen.py, it
turned the failure into silent suppression.
The doc generator can cope with incomplete documentation now. I don't
know since when, or what the problem was, or even whether it ever
existed.
Drop the silent suppression.
[*] The fail part was broken, fixed in commit e8ba07ea9a.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-2-armbru@redhat.com>
The following statement produces a SyntaxWarning with Python 3.8:
if len(format) is 0:
scripts/tracetool/__init__.py:459: SyntaxWarning: "is" with a literal. Did you mean "=="?
Use the conventional len(x) == 0 syntax instead.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191010122154.10553-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The `make efi` target added by 536d2173 is built from the roms/edk2
submodule, which in turn relies on additional submodules nested under
roms/edk2.
The make-release script currently only pulls in top-level submodules,
so these nested submodules are missing in the resulting tarball.
We could try to address this situation more generally by recursively
pulling in all submodules, but this doesn't necessarily ensure the
end-result will build properly (this case also required other changes).
Additionally, due to the nature of submodules, we may not always have
control over how these sorts of things are dealt with, so for now we
continue to handle it on a case-by-case in the make-release script.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Bruce Rogers <brogers@suse.com>
Cc: qemu-stable@nongnu.org # v4.1.0
Reported-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20190912231202.12327-2-mdroth@linux.vnet.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The low bits are 1 if the control must be one, the high bits
are 1 if the control can be one. Correct the variable names
as they are very confusing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qapi-gen.py crashes when it can't open the main schema file, and when
it can't read from any schema file. Lazy.
Change QAPISchema.__init__() to take a file name instead of a file
object. Move the open code from _include() to __init__(), so it's
used for the main schema file, too.
Move the read into the try for good measure, and rephrase the error
message.
Reporting open or read failure for the main schema file needs a
QAPISourceInfo representing "no source". Make QAPISourceInfo cope
with fname=None.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-27-armbru@redhat.com>
Point to the previous definition, unless it's a built-in.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-26-armbru@redhat.com>
Have check_exprs() check this later, so the error message gains an "in
definition line". Tweak the error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-25-armbru@redhat.com>
check_keys() has become a trivial wrapper for check_known_keys().
Eliminate it.
This makes its name available. Rename check_known_keys().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-24-armbru@redhat.com>
check_if()'s errors don't point to the offending part of the
expression. For instance:
tests/qapi-schema/alternate-branch-if-invalid.json:2: 'if' condition ' ' makes no sense
Other check_FOO() do, with the help of a @source argument. Make
check_if() do that, too. The example above improves to:
tests/qapi-schema/alternate-branch-if-invalid.json:2: 'if' condition ' ' of 'data' member 'branch' makes no sense
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190927134639.4284-23-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Many error messages refer to the offending definition even though
they're preceded by an "in definition" line. Rephrase them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190927134639.4284-22-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Have check_exprs() call check_keys() later, so its error messages gain
an "in definition" line.
Both check_keys() and check_name_is_str() check the definition's name
is a string. Since check_keys() now runs after check_name_is_str()
rather than before, its check is dead. Bury it. Checking values in
check_keys() is unclean anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-21-armbru@redhat.com>
Split check_flags() off check_keys() and have check_exprs() call it
later, so its error messages gain an "in definition" line. Tweak the
error messages.
Checking values in a function named check_keys() is unclean anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-20-armbru@redhat.com>
Move check_if() from check_keys() to check_exprs() and call it later,
so its error messages gain an "in definition" line.
Checking values in a function named check_keys() is unclean anyway.
The original sin was commit 0545f6b887 "qapi: Better error messages
for bad expressions", which checks the value of key 'name'. More
sinning in commit 2cbf09925a "qapi: More rigorous checking for type
safety bypass", commit c818408e44 "qapi: Implement boxed types for
commands/events", and commit 967c885108 "qapi: add 'if' to top-level
expressions". This commit does penance for the latter. The next
commits will do penance for the others.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-19-armbru@redhat.com>
QAPISchemaCommand.check() and QAPISchemaEvent().check() check 'data'
is present when 'boxed': true. That's context-free. Move to
check_command() and check_event().
Tweak the error message while there.
check_exprs() & friends now check exactly what qapi-code-gen.txt calls
the second layer of syntax.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-18-armbru@redhat.com>
When we introduced the QAPISchema intermediate representation (commit
ac88219a6c), we took a shortcut: we left check_exprs() & friends
alone instead of moving semantic checks into the
QAPISchemaFOO.check(). The .check() assert check_exprs() did its job.
Time to finish the conversion job. Move exactly the context-sensitive
checks to the .check(). They replace assertions there. Context-free
checks stay put.
Fixes the misleading optional tag error demonstrated by test
flat-union-optional-discriminator.
A few other error message improve.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-17-armbru@redhat.com>
check_name() consists of check_name_is_str() and check_name_str().
check_union() relies on the latter to catch optional discriminators.
The next commit will replace that by a more straightforward check.
Inlining check_name() into check_union() now should make that easier
to review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-16-armbru@redhat.com>
Future commits will need info in the .check() methods of
QAPISchemaMember and its descendants. Get it there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-15-armbru@redhat.com>
check_type() checks the array's contents, then peels off the array and
falls through to the "not array" code without resetting allow_array
and allow_dict to False. Works because the peeled value is a string,
and allow_array and allow_dict aren't used then. Tidy up anyway:
recurse instead, defaulting allow_array and allow_dict to False.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-14-armbru@redhat.com>
The checks for reserved names are spread far and wide. Move one from
add_name() to new check_defn_name_str(). This is a first step towards
collecting them all in dedicated name checking functions next to
check_name().
While there, drop the quotes around the meta-type in
check_name_str()'s error messages: "'command' uses ... name 'NAME'"
becomes "command uses ... name 'NAME'".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-13-armbru@redhat.com>
The special "does not allow optional name" error is well meant, but
confusing in practice. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-12-armbru@redhat.com>
Replace check_name() by check_name_str() where the name is known to be
a string.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-11-armbru@redhat.com>
Split check_name() into check_name_is_str() and check_name_str(), keep
check_name() as a wrapper.
Move add_name()'s call into its caller check_exprs(), and inline.
This permits delaying check_name_str() there, so its error message
gains an "in definition" line.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-10-armbru@redhat.com>
Most check_FOO() take the thing being checked as first argument.
check_name(), check_type(), check_known_keys() don't. Clean that up.
While there, drop a "Todo" comment that should have been dropped in
commit 87adbbffd4 "qapi: add a dictionary form for TYPE".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-9-armbru@redhat.com>
We report name clashes like this:
struct-base-clash.json: In struct 'Sub':
struct-base-clash.json:5: 'name' (member of Sub) collides with 'name' (member of Base)
The "(member of Sub)" is redundant with "In struct 'Sub'". Comes from
QAPISchemaMember.describe(). Pass info to it, so it can detect the
redundancy and avoid it. Result:
struct-base-clash.json: In struct 'Sub':
struct-base-clash.json:5: member 'name' collides with member 'name' of type 'Base'
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-8-armbru@redhat.com>
Starting error messages with a capital letter complicates things when
text can get interpolated both at the beginning and in the middle of
an error message. The next patch will do that. Switch to lower case
to keep it simpler.
For what it's worth, the GNU Coding Standards advise the message
"should not begin with a capital letter when it follows a program name
and/or file name, because that isn’t the beginning of a sentence. (The
sentence conceptually starts at the beginning of the line.)"
While there, avoid breaking lines containing multiple arguments in the
middle of an argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-7-armbru@redhat.com>
QAPISchemaMember.check_clash() checks for member names that map to the
same c_name(). Takes care of rejecting duplicate names.
It also checks a naming rule: no uppercase in member names. That's a
rather odd place to do it. Enforcing naming rules is
check_name_str()'s job.
qapi-code-gen.txt specifies the name case rule applies to the name as
it appears in the schema. check_clash() checks c_name(name) instead.
No difference, as c_name() leaves alone case, but unclean.
Move the name case check into check_name_str(), less the c_name().
New argument @permit_upper suppresses it. Pass permit_upper=True for
definitions (which are not members), and when the member's owner is
whitelisted with pragma name-case-whitelist.
Bonus: name-case-whitelist now applies to a union's inline base, too.
Update qapi/qapi-schema.json pragma to whitelist union CpuInfo instead
of CpuInfo's implicit base type's name q_obj_CpuInfo-base.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-6-armbru@redhat.com>
We take pains to include the offending expression in error messages,
e.g.
tests/qapi-schema/alternate-any.json:2: alternate 'Alt' member 'one' cannot use type 'any'
But not always:
tests/qapi-schema/enum-if-invalid.json:2: 'if' condition must be a string or a list of strings
Instead of improving them one by one, report the offending expression
whenever it is known, like this:
tests/qapi-schema/enum-if-invalid.json: In enum 'TestIfEnum':
tests/qapi-schema/enum-if-invalid.json:2: 'if' condition must be a string or a list of strings
Error messages that mention the offending expression become a bit
redundant, e.g.
tests/qapi-schema/alternate-any.json: In alternate 'Alt':
tests/qapi-schema/alternate-any.json:2: alternate 'Alt' member 'one' cannot use type 'any'
I'll take care of that later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-5-armbru@redhat.com>
We track source locations with a dict of the form
{'file': FNAME, 'line': LINENO, 'parent': PARENT}
where PARENT is None for the main file, and the include directive's
source location for included files.
This is serviceable enough, but the next commit will add information,
and that's going to come out cleaner if we turn this into a class. So
do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-4-armbru@redhat.com>
QAPISchemaMember.owner is the name of the defining entity. That's a
confusing name when an object type inherits members from a base type.
Rename it to .defined_in. Rename .set_owner() and ._pretty_owner() to
match.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-3-armbru@redhat.com>
