This reverts commit 0883c5159f.
Those stubs were only used by PCI ESP emulation, which is now
not compiled on architectures which have no PCI bus support.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
sparc machines loose ability to instanciate PCI ESP SCSI adapter,
which is not a big loose as they don't have PCI bus support.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit 5931065907 is incomplete,
we'll arrive in the scsi command complete callback in CSW state
and must handle that case correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Legacy -drive cyls=... are now ignored completely when the drive
doesn't back a hard disk device. Before, they were first checked
against a hard disk's limits, then ignored.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit b1f416aa8d breaks vhost_net
because it always registers the virtio_pci_host_notifier_read() handler
function on the ioeventfd, even when vhost_net.ko is using the ioeventfd.
The result is both QEMU and vhost_net.ko polling on the same eventfd
and the virtio_net.ko guest driver seeing inconsistent results:
# ifconfig eth0 192.168.0.1 netmask 255.255.255.0
virtio_net virtio0: output:id 0 is not a head!
To fix this, proceed the same as we do for irqfd: add a parameter to
virtio_queue_set_host_notifier_fd_handler and in that case only set
the notifier, not the handler.
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Tested-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/scsi-next:
scsi: add support for ATA_PASSTHROUGH_xx scsi command
esp: add missing const on TypeInfo structures
esp: enable for all PCI machines
Revert "megasas: disable due to build breakage"
megasas: static SAS addresses
scsi-disk: fix compilation with DEBUG_SCSI
megasas: Update function megasys_scsi_uninit
SCSI: STARTSTOPUNIT only eject/load media if powercondition is 0
SCSI: Update the sense code for PREVENT REMOVAL errors
Correct the command names of opcode 0x85 and 0xa1, and calculate
their xfer size from CDB.
Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* stefanha/net:
net: add the support for -netdev socket, listen
net: fix the coding style
hub: add the support for hub own flow control
net: determine if packets can be sent before net queue deliver packets
net: cleanup deliver/deliver_iov func pointers
net: Make "info network" output more readable info
net: Rename qemu_del_vlan_client() to qemu_del_net_client()
net: Rename vc local variables to nc
net: Rename VLANClientState to NetClientState
net: Rename non_vlan_clients to net_clients
net: Remove VLANState
net: Remove vlan code from net.c
net: Convert qdev_prop_vlan to peer with hub
net: Drop vlan argument to qemu_new_net_client()
hub: Check that hubs are configured correctly
net: Look up 'vlan' net clients using hubs
net: Use hubs for the vlan feature
net: Add a hub net client
net: Add interface to bridge when SIOCBRADDIF isn't available
This patch introduces a new property 'sas_address' which
allows the user to specify the SAS address for the HBA.
The default address is following the NAA locally assigned
identifier format with the locally assigned address
0x525400 as used eg for the MAC addresses.
The lower bytes are set to the pci address which
will ensure uniqueness for the local machine.
The port addresses are now calculated based on the magic
number 0x1221 (which is found in real hardware, too) plus
the device number.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Andreas Faerber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit f90c2bcdbc changed
PCIUnregisterFunc, therefore the function prototype
needs an update.
megasas.o is currently not linked, so this bug was not
detected by the buildbots.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The START STOP UNIT command will only eject/load media if
power condition is zero.
If power condition is !0 then LOEJ and START will be ignored.
From MMC (sbc contains similar wordings too)
The Power Conditions field requests the block device to be placed
in the power condition defined in
Table 558. If this field has a value other than 0h then the Start
and LoEj bits shall be ignored.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change the sense codes for failures to eject a device that is locked
by PREVENT_ALLOW_MEDIUM_REMOVAL from
the generic MEDIA_LOAD_OR_EJECT_FAILED to the more specific
MEDIUM_REMOVAL_PREVENTED.
The second sense code is more accurate, and is also listed in MMC annex F
for the recommended sense codes for MMC devices while the first sense code is not.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For command line options which permit '?' meaning 'please list the
permitted values', add support for 'help' as a synonym, by abstracting
the check out into a helper function.
This change means that in some cases where we were being lazy in
our string parsing, "?junk" will now be rejected as an invalid option
rather than being (undocumentedly) treated the same way as "?".
Update the documentation to use 'help' rather than '?', since '?'
is a shell metacharacter and thus prone to fail confusingly if there
is a single character filename in the current working directory and
the '?' has not been escaped. It's therefore better to steer users
towards 'help', though '?' is retained for backwards compatibility.
We do not, however, update the output of the system emulator's -help
(or any documentation autogenerated from the qemu-options.hx which
is the source of the -help text) because libvirt parses our -help
output and will break. At a later date when QEMU provides a better
interface so libvirt can avoid having to do this, we can update the
-help text too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Moving reset callback into cpu object from board level and
resetting cpu at the end of x86_cpu_realize() will allow properly
create cpu object during run-time (hotplug) without calling reset externaly.
When reset over QOM hierarchy is implemented, reset callback
should be removed.
v2:
- leave cpu_reset in pc_new_cpu() for now, it's to be cleaned up when APIC
init is moved in cpu.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
MP initialization protocol differs between cpu families, and for P6 and
onward models it is up to CPU to decide if it will be BSP using this
protocol, so try to model this. However there is no point in implementing
MP initialization protocol in qemu. Thus first CPU is always marked as BSP.
This patch:
- moves decision to designate BSP from board into cpu, making cpu
self-sufficient in this regard. Later it will allow to cleanup hw/pc.c
and remove cpu_reset and wrappers from there.
- stores flag that CPU is BSP in IA32_APIC_BASE to model behavior
described in Inted SDM vol 3a part 1 chapter 8.4.1
- uses MSR_IA32_APICBASE_BSP flag in apic_base for checking if cpu is BSP
patch is based on Jan Kiszka's proposal:
http://thread.gmane.org/gmane.comp.emulators.qemu/100806
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
xen_pt_unregister_device is used as PCIUnregisterFunc, so it should
match the type.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Another step in moving the vlan feature out of net core. Users only
deal with NetClientState and therefore qemu_del_vlan_client() should be
named qemu_del_net_client().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that VLANClientState has been renamed to NetClientState all 'vc'
local variables should be 'nc'. Much of the code already used 'nc' but
there are places where 'vc' needs to be renamed.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The vlan feature is no longer part of net core. Rename VLANClientState
to NetClientState because net clients are not explicitly associated with
a vlan at all, instead they have a peer net client to which they are
connected.
This patch is a mechanical search-and-replace except for a few
whitespace fixups where changing VLANClientState to NetClientState
misaligned whitespace.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
VLANState is no longer used and can be removed.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The vlan implementation in net.c has been replaced by hubs so we can
remove the code.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Instead of using VLANState use net/hub.h to support the vlan qdev
property. The vlan qdev property becomes an alias for the peer qdev
property but is represented as a VLAN ID number. When a VLAN ID is
selected the device will really peer with a hub port.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
For 9p we can get the attach request multiple times for the
same export. So don't adding migration blocker for every
attach request.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
* bonzini/scsi-next: (32 commits)
virtio-scsi: enable MSI-X support
virtio-scsi: add ioeventfd support
virtio-scsi: report parameter change events
virtio-scsi: do not report dropped events after reset
virtio-scsi: Report missed events
virtio-scsi: Implement hotplug support for virtio-scsi
scsi: report parameter changes to HBA drivers
scsi-disk: report resized disk via sense codes
scsi: establish precedence levels for unit attention
scsi: introduce hotplug() and hot_unplug() interfaces for SCSI bus
scsi: add tracepoint for scsi_req_cancel
scsi-disk: removable hard disks support load/eject
scsi-disk: Fail medium writes with proper sense for readonly LUNs
scsi-disk: improve the lba-out-of-range tests for read/write/verify
scsi-disk: rd/wr/vr-protect !=0 is an error
scsi-disk: support toggling the write cache
scsi-disk: parse MODE SELECT commands and parameters
scsi-disk: fix changeable values for MODE_PAGE_R_W_ERROR
scsi-disk: adjust offsets in MODE SENSE by 2
scsi-disk: support emulated TO_DEV requests
...
Drop a duplicate definition of the 'disabled' property from
the escc qdev property list: this redefinition is currently
effectively ignored but will become an error. (The duplication
was inadvertently introduced in 2009 in commit ec02f7dec2.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Frber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
While virtio-scsi does support multiqueue, the default number of
interrupt vectors is not enough to actually enable usage of
multiple queues in the driver; this is because with only 2
vectors the driver will not be able to use a separate
interrupt for each request queue. Derive the desired number
of vectors from the number of request queues.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Probably due to bad merge months ago, virtio-scsi-pci did not have
ioeventfd support. Fix this and enable it by default, as is the
case for other virtio-pci devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When an event is reported but no buffers are present in the event vq,
we can set a flag and report a dummy event as soon as one is added.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement the hotplug() and hot_unplug() interfaces in virtio-scsi, by signal
the virtio_scsi.ko in guest kernel via event virtual queue.
The counterpart patch of virtio_scsi.ko will be sent soon in another thread.
Signed-off-by: Sen Wang <senwang@linux.vnet.ibm.com>
Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
[ Add memset, fix LUN field, placate checkpatch - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux will not use these, but a very similar mechanism will be used to
report the condition via virtio-scsi events.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a device is resized, we will report a unit attention condition
for CAPACITY DATA HAS CHANGED. However, we should ensure that this
condition does not override a more important unit attention condition.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add two interfaces hotplug() and hot_unplug() to scsi bus info.
The scsi bus can implement these two interfaces to signal the HBA driver
of guest kernel to add/remove the scsi device in question.
Signed-off-by: Sen Wang <senwang@linux.vnet.ibm.com>
Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
[ Fixed braces and indentation - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
