This changes a cpu.h dependency for hw/ppc/ppc.h into a cpu-qom.h
dependency. For it to compile we also need to clean up a few unused
definitions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently spapr doesn't support "aborting" hotplug of PCI
devices by allowing device_del to immediately remove the
device if we haven't signalled the presence of the device
to the guest.
In the past this wasn't an issue, since we always immediately
signalled device attach and simply relied on full guest-aware
add->remove path for device removal. However, as of 788d259,
we now defer signalling for PCI functions until function 0
is attached, so now we need to deal with these "abort" operations
for cases where a user hotplugs a non-0 function, then opts to
remove it prior hotplugging function 0. Currently they'd have to
reboot before the unplug completed. PCIe multifunction hotplug
does not have this requirement however, so from a management
implementation perspective it would be good to address this within
the same release as 788d259.
We accomplish this by simply adding a 'signalled' flag to track
whether a device hotplug event has been sent to the guest. If it
hasn't, we allow immediate removal under the assumption that the
guest will not be using the device. Devices present at boot/reset
time are also assumed to be 'signalled'.
For CPU/memory/etc, signalling will still happen immediately
as part of device_add, so only PCI functions should be affected.
Cc: bharata@linux.vnet.ibm.com
Cc: david@gibson.dropbear.id.au
Cc: sbhat@linux.vnet.ibm.com
Cc: qemu-ppc@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[dwg: This fixes a regression where an incorrect hot-add of a non-zero
function can no longer be backed out until function 0 is added]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This patch fixes the current AIL implementation for POWER8. The
interrupt vector address can be calculated directly from LPCR when the
exception is handled. The excp_prefix update becomes useless and we
can cleanup the H_SET_MODE hcall.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: Removed LPES0/1 handling for HV vs. !HV
Fixed LPCR_ILE case for POWERPC_EXCP_POWER8 ]
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
[dwg: This was written as a cleanup, but it also fixes a real bug
where setting an alternative interrupt location would not be
correctly migrated]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qemu-common.h should only be included by .c files. Its file comment
explains why: "No header file should depend on qemu-common.h, as this
would easily lead to circular header dependencies."
qemu/iov.h includes qemu-common.h for QEMUIOVector stuff. Move all
that to qemu/iov.h and drop the ill-advised include. Include
qemu/iov.h where the QEMUIOVector stuff is now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using the return value to report errors is error prone:
- xics_alloc() returns -1 on error but spapr_vio_busdev_realize() errors
on 0
- xics_alloc_block() returns the unclear value of ics->offset - 1 on error
but both rtas_ibm_change_msi() and spapr_phb_realize() error on 0
This patch adds an errp argument to xics_alloc() and xics_alloc_block() to
report errors. The return value of these functions is a valid IRQ number
if errp is NULL. It is undefined otherwise.
The corresponding error traces get promotted to error messages. Note that
the "can't allocate IRQ" error message in spapr_vio_busdev_realize() also
moves to xics_alloc(). Similar error message consolidation isn't really
applicable to xics_alloc_block() because callers have extra context (device
config address, MSI or MSIX).
This fixes the issues mentioned above.
Based on previous work from Brian W. Hart.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When migrating the 'pseries' machine type with KVM, we use a special fd
to access the hash page table stored within KVM. Usually, this fd is
opened at the beginning of migration, and kept open until the migration
is complete.
However, if there is a guest reset during the migration, the fd can become
stale and we need to re-open it. At the moment we use an 'htab_fd_stale'
flag in sPAPRMachineState to signal this, which is checked in the migration
iterators.
But that's rather ugly. It's simpler to just close and invalidate the
fd on reset, and lazily re-open it in migration if necessary. This patch
implements that change.
This requires a small addition to the machine state's instance_init,
so that htab_fd is initialized to -1 (telling the migration code it
needs to open it) instead of 0, which could be a valid fd.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
rtas_st_buffer_direct() is a not particularly useful wrapper around
cpu_physical_memory_write(). All the callers are in
rtas_ibm_configure_connector, where it's better handled by local helper.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
rtas_st_buffer() appears in spapr.h as though it were a widely used helper,
but in fact it is only used for saving data in a format used by
rtas_ibm_get_system_parameter(). This changes it to a local helper more
specifically for that function.
While we're there fix a couple of small defects in
rtas_ibm_get_system_parameter:
- For the string value SPLPAR_CHARACTERISTICS, it wasn't including the
terminating \0 in the length which it should according to LoPAPR
7.3.16.1
- It now checks that the supplied buffer has at least enough space for
the length of the returned data, and returns an error if it does not.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
The OHCI has some bugs and performance issues, so for
newer machines it's preferable to use XHCI instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Because of the way non-VFIO guest IOMMU operations are KVM accelerated, not
all TCE tables (guest IOMMU contexts) can support VFIO devices. Currently,
this is decided at creation time.
To support hotplug of VFIO devices, we need to allow a TCE table which
previously didn't allow VFIO devices to be switched so that it can. This
patch adds an spapr_tce_set_need_vfio() function to do this, by
reallocating the table in userspace if necessary.
Currently this doesn't allow the KVM acceleration to be re-enabled if all
the VFIO devices are removed. That's an optimization for another time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
The vfio_accel parameter used when creating a new TCE table (guest IOMMU
context) has a confusing name. What it really means is whether we need the
TCE table created to be able to support VFIO devices.
VFIO is relevant, because when available we use in-kernel acceleration of
the TCE table, but that may not work with VFIO devices because updates to
the table are handled in kernel, bypass qemu and so don't hit qemu's
infrastructure for keeping the VFIO host IOMMU state in sync with the guest
IOMMU state.
Rename the parameter to "need_vfio" throughout. This is a cosmetic change,
with no impact on the logic.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
The PAPR interface defines a hypercall to pass high-quality
hardware generated random numbers to guests. Recent kernels can
already provide this hypercall to the guest if the right hardware
random number generator is available. But in case the user wants
to use another source like EGD, or QEMU is running with an older
kernel, we should also have this call in QEMU, so that guests that
do not support virtio-rng yet can get good random numbers, too.
This patch now adds a new pseudo-device to QEMU that either
directly provides this hypercall to the guest or is able to
enable the in-kernel hypercall if available. The in-kernel
hypercall can be enabled with the use-kvm property, e.g.:
qemu-system-ppc64 -device spapr-rng,use-kvm=true
For handling the hypercall in QEMU instead, a "RngBackend" is
required since the hypercall should provide "good" random data
instead of pseudo-random (like from a "simple" library function
like rand() or g_random_int()). Since there are multiple RngBackends
available, the user must select an appropriate back-end via the
"rng" property of the device, e.g.:
qemu-system-ppc64 -object rng-random,filename=/dev/hwrng,id=gid0 \
-device spapr-rng,rng=gid0 ...
See http://wiki.qemu-project.org/Features-Done/VirtIORNG for
other example of specifying RngBackends.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Support hotplug identifier type RTAS_LOG_V6_HP_ID_DRC_COUNT that allows
hotplugging of DRCs by specifying the DRC count.
While we are here, rename
spapr_hotplug_req_add_event() to spapr_hotplug_req_add_by_index()
spapr_hotplug_req_remove_event() to spapr_hotplug_req_remove_by_index()
so that they match with spapr_hotplug_req_add_by_count().
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Parse ibm,architecture.vec table obtained from the guest and enable
memory node configuration via ibm,dynamic-reconfiguration-memory if guest
supports it. This is in preparation to support memory hotplug for
sPAPR guests.
This changes the way memory node configuration is done. Currently all
memory nodes are built upfront. But after this patch, only memory@0 node
for RMA is built upfront. Guest kernel boots with just that and rest of
the memory nodes (via memory@XXX or ibm,dynamic-reconfiguration-memory)
are built when guest does ibm,client-architecture-support call.
Note: This patch needs a SLOF enhancement which is already part of
SLOF binary in QEMU.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Enable memory hotplug for pseries 2.4 and add LMB DR connectors.
With memory hotplug, enforce RAM size, NUMA node memory size and maxmem
to be a multiple of SPAPR_MEMORY_BLOCK_SIZE (256M) since that's the
granularity in which LMBs are represented and hot-added.
LMB DR connectors will be used by the memory hotplug code.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[spapr_drc_reset implementation]
[since this missed the 2.4 cutoff, changing to only enable for 2.5]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Certain methods in sPAPRDRConnector objects are only ever called by
RTAS and in many cases are responsible for the logic that determines
the RTAS return codes.
Rather than having a level of indirection requiring RTAS code to
re-interpret return values from such methods to determine the
appropriate return code, just pass them through directly.
This requires changing method return types to uint32_t to match the
type of values currently passed to RTAS helpers.
In the case of read accesses like drc->entity_sense() where we weren't
previously reporting any errors, just the read value, we modify the
function to return RTAS return code, and pass the read value back via
reference.
Suggested-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Initialize a hotplug memory region under which all the hotplugged
memory is accommodated. Also enable memory hotplug by setting
CONFIG_MEM_HOTPLUG.
Modelled on i386 memory hotplug.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Logical resources start with allocation-state:UNUSABLE /
isolation-state:ISOLATED. During hotplug, guests will transition
them to allocation-state:USABLE, and then to
isolation-state:UNISOLATED.
For cases where we cannot transition to allocation-state:USABLE,
in this case due to no device/resource being association with
the logical DRC, we should return an error -3.
For physical DRCs, we default to allocation-state:USABLE and stay
there, so in this case we should report an error -3 when the guest
attempts to make the isolation-state:ISOLATED transition for a DRC
with no device associated.
These are as documented in PAPR 2.7, 13.5.3.4.
We also ensure allocation-state:USABLE when the guest attempts
transition to isolation-state:UNISOLATED to deal with misbehaving
guests attempting to bring online an unallocated logical resource.
This is as documented in PAPR 2.7, 13.7.
Currently we implement no such error logic. Fix this by handling
these error cases as PAPR defines.
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This introduces rtas_ldq() to load 64-bits parameter from continuous
two 4-bytes memory chunk of RTAS parameter buffer, to simplify the
code.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If drmgr is used in the guest to hotplug a device before a device_add
has been issued via the QEMU monitor, QEMU segfaults in configure_connector
call. This occurs due to accessing of NULL FDT which otherwise would have
been created and associated with the DRC during device_add command.
Check for NULL FDT and return failure from configure_connector call.
As per PAPR+, an error value of -9003 seems appropriate for this failure.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To see the output of the hcall_dprintf statements, you currently have
to enable the DEBUG_SPAPR_HCALLS macro in include/hw/ppc/spapr.h.
This is ugly because a) not every user who wants to debug guest
problems can or wants to recompile QEMU to be able to see such issues,
and b) since this macro is disabled by default, the code in the
hcall_dprintf() brackets tends to bitrot until somebody temporarily
enables that macro again.
Since the hcall_dprintf statements except one indicate guest
problems, let's always use qemu_log_mask(LOG_GUEST_ERROR, ...) for
this macro instead. One spot indicated an unimplemented host feature,
so this is changed into qemu_log_mask(LOG_UNIMP, ...) instead. Now
it's possible to see all those messages by simply adding the CLI
parameter "-d guest_errors,unimp", without the need to re-compile
the binary.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When supporting CPU hot removal by parking the vCPU fd and reusing
it during hotplug again, there can be cases where we try to reenable
KVM_CAP_IRQ_XICS CAP for the vCPU for which it was already enabled.
Introduce a boolean member in ICPState to track this and don't
reenable the CAP if it was already enabled earlier.
Re-enabling this CAP should ideally work, but currently it results in
kernel trying to create and associate ICP with this vCPU and that
fails since there is already an ICP associated with it. Hence this
patch is needed to work around this problem in the kernel.
This change allows CPU hot removal to work for sPAPR.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add support for ibm,lrdr-capacity since this is needed by the guest
kernel to know about the possible hot-pluggable CPUs and Memory. With
this, pseries kernels will start reporting correct maxcpus in
/sys/devices/system/cpu/possible.
Also define the minimum hotpluggable memory size as 256MB.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: Fix compile error on 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently although we have an sPAPRMachineState descended from MachineState
we don't have an sPAPRMAchineClass descended from MachineClass. So far it
hasn't been needed, but several upcoming features are going to want it,
so this patch creates a stub implementation.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The sPAPRMachineState structure includes an entry_point field containing
the initial PC value for starting the machine, even though this always has
the value 0x100.
I think this is a hangover from very early versions which bypassed the
firmware when using -kernel. In any case it has no function now, so remove
it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The ram_limit field was imported from sPAPREnvironment where it predates
the machine's ram size being available generically from machine->ram_size.
Worse, the existing code was inconsistent about where it got the ram size
from. Sometimes it used spapr->ram_limit, sometimes the global 'ram_size'
and sometimes a local 'ram_size' masking the global.
This cleans up the code to consistently use machine->ram_size, eliminating
spapr->ram_limit in the process.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The code for -machine pseries maintains a global sPAPREnvironment structure
which keeps track of general state information about the guest platform.
This predates the existence of the MachineState structure, but performs
basically the same function.
Now that we have the generic MachineState, fold sPAPREnvironment into
sPAPRMachineState, the pseries specific subclass of MachineState.
This is mostly a matter of search and replace, although a few places which
relied on the global spapr variable are changed to find the structure via
qdev_get_machine().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Version: GnuPG v1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=TBeO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging
# gpg: Signature made Fri Jun 5 20:59:07 2015 BST using RSA key ID AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jnsnow/tags/ide-pull-request:
macio: remove remainder_len DBDMA_io property
macio: update comment/constants to reflect the new code
macio: switch pmac_dma_write() over to new offset/len implementation
macio: switch pmac_dma_read() over to new offset/len implementation
fdc-test: Test state for existing cases more thoroughly
fdc: Fix MSR.RQM flag
fdc: Disentangle phases in fdctrl_read_data()
fdc: Code cleanup in fdctrl_write_data()
fdc: Use phase in fdctrl_write_data()
fdc: Introduce fdctrl->phase
fdc: Rename fdctrl_set_fifo() to fdctrl_to_result_phase()
fdc: Rename fdctrl_reset_fifo() to fdctrl_to_command_phase()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since the block alignment code is now effectively independent of the DMA
implementation, this variable is no longer required and can be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1433455177-21243-5-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
In particular, this fixes a bug whereby chains of overlapping head/tail chains
would incorrectly write over each other's remainder cache. This is the access
pattern used by OS X/Darwin and fixes an issue with a corrupt Darwin
installation in my local tests.
While we are here, rename the DBDMA_io struct property remainder to
head_remainder for clarification.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1433455177-21243-3-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
This function handles generation of ibm,drc-* array device tree
properties to describe DRC topology to guests. This will by used
by the guest to direct RTAS calls to manage any dynamic resources
we associate with a particular DR Connector as part of
hotplug/unplug.
Since general management of boot-time device trees are handled
outside of sPAPRDRConnector, we insert these values blindly given
an FDT and offset. A mask of sPAPRDRConnector types is given to
instruct us on what types of connectors entries should be generated
for, since descriptions for different connectors may live in
different parts of the device tree.
Based on code originally written by Nathan Fontenot.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
We don't actually rely on this interface to surface hotplug events, and
instead rely on the similar-but-interrupt-driven check-exception RTAS
interface used for EPOW events. However, the existence of this interface
is needed to ensure guest kernels initialize the event-reporting
interfaces which will in turn be used by userspace tools to handle these
events, so we implement this interface here.
Since events surfaced by this call are mutually exclusive to those
surfaced via check-exception, we also update the RTAS event queue code
to accept a boolean to mark/filter for events accordingly.
Events of this sort are not currently generated by QEMU, but the interface
has been tested by surfacing hotplug events via event-scan in place
of check-exception.
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This extends the data structures currently used to report EPOW events to
guests via the check-exception RTAS interfaces to also include event types
for hotplug/unplug events.
This is currently undocumented and being finalized for inclusion in PAPR
specification, but we implement this here as an extension for guest
userspace tools to implement (existing guest kernels simply log these
events via a sysfs interface that's read by rtas_errd, and current
versions of rtas_errd/powerpc-utils already support the use of this
mechanism for initiating hotplug operations).
We also add support for queues of pending RTAS events, since in the
case of hotplug there's chance for multiple events being in-flight
at any point in time.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This interface is used to fetch an OF device-tree nodes that describes a
newly-attached device to guest. It is called multiple times to walk the
device-tree node and fetch individual properties into a 'workarea'/buffer
provided by the guest.
The device-tree is generated by QEMU and passed to an sPAPRDRConnector during
the initial hotplug operation, and the state of these RTAS calls is tracked by
the sPAPRDRConnector. When the last of these properties is successfully
fetched, we report as special return value to the guest and transition
the device to a 'configured' state on the QEMU/DRC side.
See docs/specs/ppc-spapr-hotplug.txt for a complete description of
this interface.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This is similar to the existing rtas_st_buffer(), but for cases
where the guest is not expecting a length-encoded byte array.
Namely, for calls where a "work area" buffer is used to pass
around arbitrary fields/data.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This interface allows a guest to control various platform/device
sensors. Initially, we only implement support necessary to control
sensors that are required for hotplug: DR connector indicators/LEDs,
resource allocation state, and resource isolation state.
See docs/specs/ppc-spapr-hotplug.txt for a complete description of
this interface.
Signed-off-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This device emulates a firmware abstraction used by pSeries guests to
manage hotplug/dynamic-reconfiguration of host-bridges, PCI devices,
memory, and CPUs. It is conceptually similar to an SHPC device,
complete with LED indicators to identify individual slots to physical
physical users and indicate when it is safe to remove a device. In
some cases it is also used to manage virtualized resources, such a
memory, CPUs, and physical-host bridges, which in the case of pSeries
guests are virtualized resources where the physical components are
managed by the host.
Guests communicate with these DR Connectors using RTAS calls,
generally by addressing the unique DRC index associated with a
particular connector for a particular resource. For introspection
purposes we expose this state initially as QOM properties, and
in subsequent patches will introduce the RTAS calls that make use of
it. This constitutes to the 'guest' interface.
On the QEMU side we provide an attach/detach interface to associate
or cleanup a DeviceState with a particular sPAPRDRConnector in
response to hotplug/unplug, respectively. This constitutes the
'physical' interface to the DR Connector.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The check "liobn & 0xFFFFFFFF00000000ULL" in spapr_tce_find_by_liobn()
is completely useless since liobn is only declared as an uint32_t
parameter. Fix this by using target_ulong instead (this is what most
of the callers of this function are using, too).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment spapr_tce_find_by_liobn() is used by H_PUT_TCE/...
handlers to find an IOMMU by LIOBN.
We are going to implement Dynamic DMA windows (DDW), new code
will go to a new file and we will use spapr_tce_find_by_liobn()
there too so let's make it public.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This is to reduce VIO noise while debugging PCI DMA.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This introduces a macro which makes up a LIOBN from fixed prefix and
VIO device address (@reg property).
This is to keep LIOBN macros rendering consistent - the same macro for
PCI has been added by the previous patch.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
We are going to have multiple DMA windows per PHB and we want them to
migrate so we need a predictable way of assigning LIOBNs.
This introduces a macro which makes up a LIOBN from fixed prefix,
PHB index (unique PHB id) and window number.
This introduces a SPAPR_PCI_DMA_WINDOW_NUM() to know the window number
from LIOBN. It is used to distinguish the default 32bit windows from
dynamic windows and avoid picking default DMA window properties from
a wrong TCE table.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Similarly switch the macio IDE routines over to use the new function and
tidy-up the remaining code as required.
[Maintainer edit: printf format codes adjusted for 32/64bit. --js]
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: John Snow <jsnow@redhat.com>
Message-id: 1425939893-14404-3-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
The emulation for EEH RTAS requests from guest isn't covered
by QEMU yet and the patch implements them.
The patch defines constants used by EEH RTAS calls and adds
callbacks sPAPRPHBClass::{eeh_set_option, eeh_get_state, eeh_reset,
eeh_configure}, which are going to be used as follows:
* RTAS calls are received in spapr_pci.c, sanity check is done
there.
* RTAS handlers handle what they can. If there is something it
cannot handle and the corresponding sPAPRPHBClass callback is
defined, it is called.
* Those callbacks are only implemented for VFIO now. They do ioctl()
to the IOMMU container fd to complete the calls. Error codes from
that ioctl() are transferred back to the guest.
[aik: defined RTAS tokens for EEH RTAS calls]
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Bonus fix: always set an error on failure. Some failures were silent
before, except for the generic error set by device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
When the guest switches the interrupt endian mode, which essentially
means a global machine endian switch, we want to change the VGA
framebuffer endian mode as well in order to be backward compatible
with existing guests who don't know about the new endian control
register.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The initial creation of the PAPR RTC qdev class left a wart - the rtc's
offset was left in the sPAPREnvironment structure, accessed via a global.
This patch moves it into the RTC device's own state structure, were it
belongs. This requires a small change to the migration stream format. In
order to handle incoming streams from older versions, we also need to
retain the rtc_offset field in the sPAPREnvironment structure, so that it
can be loaded into via the vmsd, then pushed into the RTC device.
Since we're changing the migration format, this also takes the opportunity
to:
* Change the rtc offset from a value in seconds to a value in
nanoseconds, allowing nanosecond offsets between host and guest
rtc time, if desired.
* Remove both the already unused "next_irq" field and now unused
"rtc_offset" field from the new version of the spapr migration
stream
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
At present the PAPR RTC isn't a "device" as such - it's accessed only via
firmware/hypervisor calls, and is handled in the sPAPR core code. This
becomes inconvenient as we extend it in various ways.
This patch makes the PAPR RTC a separate device in the qemu device model.
For now, the only piece of device state - the rtc_offset - is still kept in
the global sPAPREnvironment structure. That's clearly wrong, but leaving
it to be fixed in a following patch makes for a clearer separation between
the internal re-organization of the device, and the behavioural changes
(because the migration stream format needs to change slightly when the
offset is moved into the device's own state).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The virtual RTC time is used in two places in the pseries machine. First
is in the RTAS get-time-of-day function which returns the RTC time to the
guest. Second is in the spapr events code which is used to timestamp
event messages from the hypervisor to the guest.
Currently both call qemu_get_timedate() directly, but we want to change
that so we can properly handle the various -rtc options. In preparation,
create a helper function to return the virtual RTC time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment the RTAS (firmware/hypervisor) time of day functions are
implemented in spapr_rtas.c along with a bunch of other things. Since
we're going to be expanding these a bit, move the RTAS RTC related code
out into new file spapr_rtc.c. Also add its own initialization function,
spapr_rtc_init() called from the main machine init routine.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Instead of tweaking a TCE table device by adding there a bypass flag,
let's add an alias to RAM and IOMMU memory region, and enable/disable
those according to the selected bypass mode.
This way IOMMU memory region can have size of the actual window rather
than ram_size which is essential for upcoming DDW support.
This moves bypass logic to VIO layer and keeps @bypass flag in TCE table
for migration compatibility only. This replaces spapr_tce_set_bypass()
calls with explicit assignment to avoid confusion as the function could
do something more that just syncing the @bypass flag.
This adds a pointer to VIO device into the sPAPRTCETable struct to provide
the sPAPRTCETable device a way to update bypass mode for the VIO device.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
If a guest reboots during a running migration, changes to the
hash page table are not necessarily updated on the destination.
Opening a new file descriptor to the HTAB forces the migration
handler to resend the entire table.
Signed-off-by: Samuel Mendoza-Jonas <sam.mj@au1.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
On sPAPR, virtio devices are connected to the PCI bus and use MSI-X.
Commit cc943c36fa has modified MSI-X
so that writes are made using the bus master address space and follow
the IOMMU path.
Unfortunately, the IOMMU address space address space does not have an
MSI window: the notification is silently dropped in unassigned_mem_write
instead of reaching the guest... The most visible effect is that all
virtio devices are non-functional on sPAPR since then. :(
This patch does the following:
1) map the MSI window into the IOMMU address space for each PHB
- since each PHB instantiates its own IOMMU address space, we
can safely map the window at a fixed address (SPAPR_PCI_MSI_WINDOW)
- no real need to keep the MSI window setup in a separate function,
the spapr_pci_msi_init() code moves to spapr_phb_realize().
2) kill the global MSI window as it is not needed in the end
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We currently calculate the final RTAS and FDT location based on
the early estimate of the RMA size, cropped to 256M on KVM since
we only know the real RMA size at reset time which happens much
later in the boot process.
This means the FDT and RTAS end up right below 256M while they
could be much higher, using precious RMA space and limiting
what the OS bootloader can put there which has proved to be
a problem with some OSes (such as when using very large initrd's)
Fortunately, we do the actual copy of the device-tree into guest
memory much later, during reset, late enough to be able to do it
using the final RMA value, we just need to move the calculation
to the right place.
However, RTAS is still loaded too early, so we change the code to
load the tiny blob into qemu memory early on, and then copy it into
guest memory at reset time. It's small enough that the memory usage
doesn't matter.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[aik: fixed errors from checkpatch.pl, defined RTAS_MAX_ADDR]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: fix compilation on 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
When running KVM we have to adhere to host page boundaries for memory slots.
Unfortunately the NVRAM on mac99 is a 4k RAM hole inside of an MMIO flash
area.
So if our host is configured with 64k page size, we can't use the mac99 target
with KVM. This is a real shame, as this limitation is not really an issue - we
can easily map NVRAM somewhere else and at least Linux and Mac OS X use it
at their new location.
So in that emergency case when it's about failing to run at all and moving NVRAM
to a place it shouldn't be at, choose the latter.
This patch enables -M mac99 with KVM on 64k page size hosts.
Signed-off-by: Alexander Graf <agraf@suse.de>
PAPR compliant guest calls this in absence of kdump. This finally
reaches the guest and can be handled according to the policies set by
higher level tools(like taking dump) for further analysis by tools like
crash.
Linux kernel calls ibm,os-term when extended property of os-term is set.
This makes sure that a return to the linux kernel is gauranteed.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[agraf: reduce RTAS_TOKEN_MAX]
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently SPAPR PHB keeps track of all allocated MSI (here and below
MSI stands for both MSI and MSIX) interrupt because
XICS used to be unable to reuse interrupts. This is a problem for
dynamic MSI reconfiguration which happens when guest reloads a driver
or performs PCI hotplug. Another problem is that the existing
implementation can enable MSI on 32 devices maximum
(SPAPR_MSIX_MAX_DEVS=32) and there is no good reason for that.
This makes use of new XICS ability to reuse interrupts.
This reorganizes MSI information storage in sPAPRPHBState. Instead of
static array of 32 descriptors (one per a PCI function), this patch adds
a GHashTable when @config_addr is a key and (first_irq, num) pair is
a value. GHashTable can dynamically grow and shrink so the initial limit
of 32 devices is gone.
This changes migration stream as @msi_table was a static array while new
@msi_devs is a dynamic hash table. This adds temporary array which is
used for migration, it is populated in "spapr_pci"::pre_save() callback
and expanded into the hash table in post_load() callback. Since
the destination side does not know the number of MSI-enabled devices
in advance and cannot pre-allocate the temporary array to receive
migration state, this makes use of new VMSTATE_STRUCT_VARRAY_ALLOC macro
which allocates the array automatically.
This resets the MSI configuration space when interrupts are released by
the ibm,change-msi RTAS call.
This fixed traces to be more informative.
This changes vmstate_spapr_pci_msi name from "...lsi" to "...msi" which
was incorrect by accident. As the internal representation changed,
thus bumps migration version number.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: drop g_malloc_n usage]
Signed-off-by: Alexander Graf <agraf@suse.de>
This implements interrupt release function so IRQs can be returned back
to the pool for reuse in cases such as PCI hot plug.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The current allocator returns IRQ numbers from a pool and does not
support IRQs reuse in any form as it did not keep track of what it
previously returned, it only keeps the last returned IRQ. Some use
cases such as PCI hot(un)plug may require IRQ release and reallocation.
This moves an allocator from SPAPR to XICS.
This switches IRQ users to use new API.
This uses LSI/MSI flags to know if interrupt is allocated.
The interrupt release function will be posted as a separate patch.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The existing interrupt allocation scheme in SPAPR assumes that
interrupts are allocated at the start time, continously and the config
will not change. However, there are cases when this is not going to work
such as:
1. migration - we will have to have an ability to choose interrupt
numbers for devices in the command line and this will create gaps in
interrupt space.
2. PCI hotplug - interrupts from unplugged device need to be returned
back to interrupt pool, otherwise we will quickly run out of interrupts.
This replaces a separate lslsi[] array with a byte in the ICSIRQState
struct and defines "LSI" and "MSI" flags. Neither of these flags set
signals that the descriptor is not allocated and not in use.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add support for the SPLPAR Characteristics parameter to the emulated
RTAS call ibm,get-system-parameter.
The support provides just enough information to allow "cat
/proc/powerpc/lparcfg" to succeed without generating a kernel error
message.
Without this patch the above command will produce the following kernel
message: arch/powerpc/platforms/pseries/lparcfg.c \
parse_system_parameter_string Error calling get-system-parameter \
(0xfffffffd)
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add support for the UUID parameter to the emulated RTAS call
ibm,get-system-parameter.
Return the guest's UUID as the value for the RTAS UUID system
parameter, or null (a zero length result) if it is not set.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This allows the ibm,get-system-parameter RTAS call to succeed for the
DIAGNOSTICS_RUN_MODE system parameter.
The problem can be seen with "ppc64_cpu --run-mode" from the
powerpc-utils package which fails before this patch with "Machine does
not support diagnostic run mode".
This is corrected by using the rtas_st_buffer() function to write to
the buffer.
The RTAS constants are also moved out into a header file, some new
constants added and the surrounding code slightly simplified.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[agraf: remove some commentary]
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a function to write lengh + data into a buffer as required for the
emulation of the RTAS ibm,get-system-parameter call.
If the destination is smaller than the source, the write is truncated
and success is returned. This matches the behaviour of pHyp.
This will be used in following patches.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
POWER KVM supports an KVM_CAP_SPAPR_TCE capability which allows allocating
TCE tables in the host kernel memory and handle H_PUT_TCE requests
targeted to specific LIOBN (logical bus number) right in the host without
switching to QEMU. At the moment this is used for emulated devices only
and the handler only puts TCE to the table. If the in-kernel H_PUT_TCE
handler finds a LIOBN and corresponding table, it will put a TCE to
the table and complete hypercall execution. The user space will not be
notified.
Upcoming VFIO support is going to use the same sPAPRTCETable device class
so KVM_CAP_SPAPR_TCE is going to be used as well. That means that TCE
tables for VFIO are going to be allocated in the host as well.
However VFIO operates with real IOMMU tables and simple copying of
a TCE to the real hardware TCE table will not work as guest physical
to host physical address translation is requited.
So until the host kernel gets VFIO support for H_PUT_TCE, we better not
to register VFIO's TCE in the host.
This adds a place holder for KVM_CAP_SPAPR_TCE_VFIO capability. It is not
in upstream yet and being discussed so now it is always false which means
that in-kernel VFIO acceleration is not supported.
This adds a bool @vfio_accel flag to the sPAPRTCETable device telling
that sPAPRTCETable should not try allocating TCE table in the host kernel
for VFIO. The flag is false now as at the moment there is no VFIO.
This adds an vfio_accel parameter to spapr_tce_new_table(), the semantic
is the same. Since there is only emulated PCI and VIO now, the flag is set
to false. Upcoming VFIO support will set it to true.
This is a preparation patch so no change in behaviour is expected
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment spapr_rtas_register() allocates a new token number for every
new RTAS callback so numbers are not fixed and depend on the number of
supported RTAS handlers and the exact order of spapr_rtas_register() calls.
These tokens are copied into the device tree and remain the same during
the guest lifetime.
When we start another guest to receive a migration, it calls
spapr_rtas_register() as well. If the number of RTAS handlers or their
order is different in QEMU on source and destination sides, the "/rtas"
node in the device tree will differ. Since migration overwrites the device
tree (as it overwrites the entire RAM), the actual RTAS config on
the destination side gets broken.
This defines global contant values for every RTAS token which QEMU
is using today.
This changes spapr_rtas_register() to accept a token number instead of
allocating one. This changes all users of spapr_rtas_register().
This changes XICS-KVM not to cache tokens registered with KVM as they
constant now.
This makes TOKEN_BASE global as RTAS_XXX use TOKEN_BASE as
a base. TOKEN_MAX is moved and renamed too and its value is changed
to the last token + 1. Boundary checks for token values are adjusted.
This reserves token numbers for "os-term" handlers and PCI hotplug
which we are working on.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Hotplug of multiple disks fails due to MSI vector quota check.
Number of MSI vectors default to 8 allowing only 4 devices.
This happens on RHEL6.5 guest. RHEL7 and SLES11 guests fallback
to INTX.
One way to workaround the issue is to increase total MSIs,
so that MSI quota check allows us to hotplug multiple disks.
This sets the quota to the maximum number of interupts XICS has
which is 1024 now (XICS_IRQS). This moves XICS_IRQS from spapr.c
to xics.h for wider visibility.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
[aik: put XICS_IRQS=1024 instead of 64i, fixed endianness and size]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds handling of the RESOURCE_ADDR_TRANS_MODE resource from
the H_SET_MODE, for POWER8 (PowerISA 2.07) only.
This defines AIL flags for LPCR special register.
This changes @excp_prefix according to the mode, takes effect in TCG.
This turns support of a new capability PPC2_ISA207S flag for TCG.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds @bus_offset into sPAPRTCETable to tell where TCE table starts
from. It is set to 0 for emulated devices. Dynamic DMA windows will use
other offset.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment only 4K pages are supported by sPAPRTCETable. Since sPAPR
spec allows other page sizes and we are going to implement them, we need
page size to be configrable.
This adds @page_shift into sPAPRTCETable and replaces SPAPR_TCE_PAGE_SHIFT
with it where it is possible.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This removes window_size as it is basically a copy of nb_table
shifted by SPAPR_TCE_PAGE_SHIFT. As new dynamic DMA windows are
going to support windows as big as the entire RAM and this number
will be bigger that 32 capacity, we will have to do something
about @window_size anyway and removal seems to be the right way to go.
This removes dma_window_start/dma_window_size from sPAPRPHBState as
they are no longer used.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The macio IDE controller has some pretty nasty magic in its implementation to
allow for unaligned sector accesses. We used to handle these accesses
synchronously inside the IO callback handler.
However, the block infrastructure changed below our feet and now it's impossible
to call a synchronous block read/write from the aio callback handler of a
previous block access.
Work around that limitation by making the unaligned handling bits also go
through our asynchronous handler.
This fixes booting Mac OS X for me.
Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The PAPR+ specification defines a ibm,client-architecture-support (CAS)
RTAS call which purpose is to provide a negotiation mechanism for
the guest and the hypervisor to work out the best compatibility parameters.
During the negotiation process, the guest provides an array of various
options and capabilities which it supports, the hypervisor adjusts
the device tree and (optionally) reboots the guest.
At the moment the Linux guest calls CAS method at early boot so SLOF
gets called. SLOF allocates a memory buffer for the device tree changes
and calls a custom KVMPPC_H_CAS hypercall. QEMU parses the options,
composes a diff for the device tree, copies it to the buffer provided
by SLOF and returns to SLOF. SLOF updates the device tree and returns
control to the guest kernel. Only then the Linux guest parses the device
tree so it is possible to avoid unnecessary reboot in most cases.
The device tree diff is a header with an update format version
(defined as 1 in this patch) followed by a device tree with the properties
which require update.
If QEMU detects that it has to reboot the guest, it silently does so
as the guest expects reboot to happen because this is usual pHyp firmware
behavior.
This defines custom KVMPPC_H_CAS hypercall. The current SLOF already
has support for it.
This implements stub which returns very basic tree (root node,
no properties) to the guest.
As the return buffer does not contain any change, no change in behavior is
expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This allows guests to have a different timebase origin from the host.
This is needed for migration, where a guest can migrate from one host
to another and the two hosts might have a different timebase origin.
However, the timebase seen by the guest must not go backwards, and
should go forwards only by a small amount corresponding to the time
taken for the migration.
This is only supported for recent POWER hardware which has the TBU40
(timebase upper 40 bits) register. That includes POWER6, 7, 8 but not
970.
This adds kvm_access_one_reg() to access a special register which is not
in env->spr. This requires kvm_set_one_reg/kvm_get_one_reg patch.
The feature must be present in the host kernel.
This bumps vmstate_spapr::version_id and enables new vmstate_ppc_timebase
only for it. Since the vmstate_spapr::minimum_version_id remains
unchanged, migration from older QEMU is supported but without
vmstate_ppc_timebase.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
While there, also moved the hard coded value for CLOCKFREQ to a #define.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Alexander Graf <agraf@suse.de>
There are 3 different variants of the decrementor for BookE and BookS.
The BookE variant sets TSR[DIS] to 1 when the DEC value becomes 1 or 0. TSR[DIS]
is then the indicator whether the decrementor interrupt line is asserted or not.
The old BookS variant treats DEC as an edge interrupt that gets triggered when
the DEC value's top bit turns 1 from 0.
The new BookS variant maintains the assertion bit inside DEC itself. Whenever
the DEC value becomes negative (top bit set) the DEC interrupt line is asserted.
So far we implemented mostly the old BookS variant. Let's do them all properly.
This fixes booting pseries ppc64 guest images in TCG mode for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
This changes resource code definitions to ones used in the host kernel.
This fixes H_SET_MODE_RESOURCE_LE (switch between big endian and
little endian) to sync registers from KVM before changing LPCR value.
This adds a set_spr() helper to update an SPR in a CPU's context to avoid
possible races and makes use of it to change LPCR.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This adds very basic handlers for ibm,get-system-parameter and
ibm,set-system-parameter RTAS calls.
The only parameter handled at the moment is
"platform-processor-diagnostics-run-mode" which is always disabled and
does not support changing. This is expected to make
"ppc64_cpu --run-mode=1" happy.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: s/papameter/parameter/g]
Signed-off-by: Alexander Graf <agraf@suse.de>
Most code already used QEMUTimer without the redundant 'struct' keyword.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Instead of relying on cpu_model, obtain the device tree node label
per CPU. Use DeviceClass::fw_name as source.
Whenever DeviceClass::fw_name is unknown, default to "PowerPC,UNKNOWN".
As a consequence, spapr_fixup_cpu_dt() can operate on each CPU's fw_name,
obsoleting sPAPREnvironment::cpu_model, and spapr_create_fdt_skel() can
drop its cpu_model argument.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This implements H_XIRR_X hypercall in addition to H_XIRR as
it is mandatory for PAPR+ and there is no way for the guest to
detect whether it is supported or not so just add it.
As the Partition Adjunct Option is not supported at the moment,
the CPPR parameter of the hypercall is ignored.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Recent (host) kernels support emulating the PAPR defined "XICS" interrupt
controller system within KVM. This patch allows qemu to initialize and
configure the in-kernel XICS, and keep its state in sync with qemu's XICS
state as necessary.
This should give considerable performance improvements. e.g. on a simple
IPI ping-pong test between hardware threads, using qemu XICS gives us
around 5,000 irqs/second, whereas the in-kernel XICS gives us around
70,000 irqs/s on the same hardware configuration.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[Mike Qiu <qiudayu@linux.vnet.ibm.com>: fixed mistype which caused ics_set_kvm_state() to fail]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds a cpu_setup callback to the XICS device class (as XICS-KVM
will do it different), xics_cpu_setup() will call it if it is set.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The upcoming XICS-KVM support will use bits of emulated XICS code.
So this introduces new level of hierarchy - "xics-common" class. Both
emulated XICS and XICS-KVM will inherit from it and override class
callbacks when required.
The new "xics-common" class implements:
1. replaces static "nr_irqs" and "nr_servers" properties with
the dynamic ones and adds callbacks to be executed when properties
are set.
2. xics_cpu_setup() callback renamed to xics_common_cpu_setup() as
it is a common part for both XICS'es
3. xics_reset() renamed to xics_common_reset() for the same reason.
The emulated XICS changes:
1. the part of xics_realize() which creates ICPs is moved to
the "nr_servers" property callback as realize() is too late to
create/initialize devices and instance_init() is too early to create
devices as the number of child devices comes via the "nr_servers"
property.
2. added ics_initfn() which does a little part of what xics_realize() did.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The upcoming support of in-kernel XICS will redefine migration callbacks
for both ICS and ICP so classes and callback pointers are added.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
On the real hardware, RTAS is called in real mode and therefore
top 4 bits of the address passed in the call are ignored.
So does the patch.
This converts h_rtas() to use existing rtas_ld() handlers.
This fixed rtas_ld()/rtas_st() to ignore top 4 bits.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
H_SET_MODE is used for controlling various partition settings. One
of these settings is the endianness a guest takes its exceptions in.
Signed-off-by: Anton Blanchard <anton@samba.org>
[agraf: fix whitespace]
Signed-off-by: Alexander Graf <agraf@suse.de>
On the sPAPR platform a guest allocates MSI/MSIX vectors via RTAS
hypercalls which return global IRQ numbers to a guest so it only
operates with those and never touches MSIMessage.
Therefore MSIMessage handling is completely hidden in QEMU.
Previously every sPAPR PCI host bridge implemented its own MSI window
to catch msi_notify()/msix_notify() calls from QEMU devices (virtio-pci
or vfio) and route them to the guest via qemu_pulse_irq().
MSIMessage used to be encoded as:
.addr - address within the PHB MSI window;
.data - the device index on PHB plus vector number.
The MSI MR write function translated this MSIMessage to a global IRQ
number and called qemu_pulse_irq().
However the total number of IRQs is not really big (at the moment it is
1024 IRQs starting from 4096) and even 16bit data field of MSIMessage
seems to be enough to store an IRQ number there.
This simplifies MSI handling in sPAPR PHB. Specifically, this does:
1. remove a MSI window from a PHB;
2. add a single memory region for all MSIs to sPAPREnvironment
and spapr_pci_msi_init() to initialize it;
3. encode MSIMessage as:
* .addr - a fixed address of SPAPR_PCI_MSI_WINDOW==0x40000000000ULL;
* .data as an IRQ number.
4. change IRQ allocator to align first IRQ number in a block for MSI.
MSI uses lower bits to specify the vector number so the first IRQ has to
be aligned. MSIX does not need any special allocator though.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Basically, in HW the layout of the interrupt network is:
- One ICP per processor thread (the "presenter"). This contains the
registers to fetch a pending interrupt (ack), EOI, and control the
processor priority.
- One ICS per logical source of interrupts (ie, one per PCI host
bridge, and a few others here or there). This contains the per-interrupt
source configuration (target processor(s), priority, mask) and the
per-interrupt internal state.
Under PAPR, there is a single "virtual" ICS ... somewhat (it's a bit
oddball what pHyp does here, arguably there are two but we can ignore
that distinction). There is no register level access. A pair of firmware
(RTAS) calls is used to configure each virtual interrupt.
So our model here is somewhat the same. We have one ICS in the emulated
XICS which arguably *is* the emulated XICS, there's no point making it a
separate "device", that would just be gross, and each VCPU has an
associated ICP.
Yet we call the "XICS" struct icp_state and then the ICPs
'struct icp_server_state'. It's particularly confusing when all of the
functions have xics_prefixes yet take *icp arguments.
Rename:
struct icp_state -> XICSState
struct icp_server_state -> ICPState
struct ics_state -> ICSState
struct ics_irq_state -> ICSIRQState
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1374175984-8930-12-git-send-email-aliguori@us.ibm.com
[aik: added ics_resend() on post_load]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
At present, the savevm / migration support for the pseries machine will not
work when KVM is enabled. That's because KVM manages the guest's hash page
table in the host kernel, so qemu has no visibility of it. This patch
fixes this by using new kernel interfaces to extract and reinsert the
guest's hash table during the migration process.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 1374175984-8930-11-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds the necessary pieces to implement savevm / migration for the
pseries machine. The most complex part here is migrating the hash
table - for the paravirtualized pseries machine the guest's hash page
table is not stored within guest memory, but externally and the guest
accesses it via hypercalls.
This patch uses a hypervisor reserved bit of the HPTE as a dirty bit
(tracking changes to the HPTE itself, not the page it references).
This is used to implement a live migration style incremental save and
restore of the hash table contents.
Normally a hash table is 16MB but it can get bigger depending on how
much RAM the guest has. Due to its nature, updates to it are random so
the live migration style is used for it.
In addition it adds VMStateDescription information to save and restore
the (few) remaining pieces of state information needed by the pseries
machine.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-9-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Model TCE tables as a device that's hooked up as a child object to
the owner. Besides the code cleanup, we get a few nice benefits:
1) free actually works now (it was dead code before)
2) the TCE information is visible in the device tree
3) we can expose table information as properties such that if we
change the window_size, we can use globals to keep migration
working.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1374175984-8930-6-git-send-email-aliguori@us.ibm.com
[dwg: pseries: savevm support for PAPR TCE tables]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[alexey: ppc kvm: fix to compile]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds helpers to allow PAPR VIO devices to save state common
to all VIO devices during savevm.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-3-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The DBDMA engine really just reads bytes from a producing device (IDE
in our case) and shoves these bytes into memory. It doesn't care whether
any alignment takes place or not.
Our code today however assumes that block accesses always happen on
sector (512 byte) boundaries. This is a fair assumption for most cases.
However, Mac OS X really likes to do unaligned, incomplete accesses
that it finishes with the next DMA request.
So we need to read / write the unaligned bits independent of the actual
asynchronous request, because that one can only handle 512-byte-aligned
data. We also need to cache these unaligned sectors until the next DMA
request, at which point the data might be successfully flushed from the
pipe.
Signed-off-by: Alexander Graf <agraf@suse.de>
Soon we will introduce intermediate processing pauses which will
allow the bottom half to restart a DMA request that couldn't be
fulfilled yet.
For that to work, move the processing variable into the io struct
which is what DMA providers work with.
While touching it, also change it into a bool
Signed-off-by: Alexander Graf <agraf@suse.de>
The DBDMA controller has a bottom half to asynchronously process DMA
request queues.
This bh was stored as a gross static variable. Move it into the device
struct instead.
While at it, move all users of it to the new generic kick function.
Signed-off-by: Alexander Graf <agraf@suse.de>
The DBDMA engine really is running all the time, waiting for input. However
we don't want to waste cycles constantly polling.
So introduce a kick function that data providers can call to notify the
DBDMA controller of new input.
Signed-off-by: Alexander Graf <agraf@suse.de>
We usually keep struct and constant definitions in header files. Move
them there to stay consistent and to make access to fields easier.
Signed-off-by: Alexander Graf <agraf@suse.de>
Since current_cpu is CPUState it no longer depends on CPUPPCState.
Move ppce500_set_mpic_proxy() to a new hw/ppc/ppc_e500.h because
hw/ppc/ppc.h is too heavily using CPUPPCState and PowerPCCPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Support in fwcfg has been around for exposure of the clock-frequency
CPU property. OpenBIOS reads it, we just never exposed it.
Since Mac OS X is very picky about its clock frequency values, let's
just take a known good value and always expose that.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
RTAS is a hypervisor provided binary blob that a guest loads and
calls into to execute certain functions. It's similar to the
vsyscall page in Linux or the short lived VMCI paravirt interface
from VMware.
The QEMU implementation of the RTAS blob is simply a passthrough
that proxies all RTAS calls to the hypervisor via an hypercall.
While we pass a CPU argument for hypercall handling in QEMU, we
don't pass it for RTAS calls. Since some RTAs calls require
making hypercalls (normally RTAS is implemented as guest code) we
have nasty hacks to allow that.
Add a CPU argument to RTAS call handling so we can more easily
invoke hypercalls just as guest code would.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce type constant and cast macro.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Enables support for the in-kernel MPIC that thas been merged into the
KVM next branch. This includes irqfd/KVM_IRQ_LINE support from Alex
Graf (along with some other improvements).
Note from Alex regarding kvm_irqchip_create():
On x86, one would call kvm_irqchip_create() to initialize an
in-kernel interrupt controller. That function then goes ahead and
initializes global capability variables as well as the default irq
routing table.
On ppc, we can't call kvm_irqchip_create() because we can have
different types of interrupt controllers. So we want to do all the
things that function would do for us in the in-kernel device init
handler.
Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: squash in kvm_irqchip_commit_routes patch, fix non-kvm build,
fix ppcemb]
Signed-off-by: Alexander Graf <agraf@suse.de>
The DMAContext is a simple pointer to an AddressSpace that is now always
already available. Make everyone hold the address space directly,
and clean up the DMA API to use the AddressSpace directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fetch the root region from the sPAPRTCETable, and use it to build
an AddressSpace and DMAContext.
Now, everywhere we have a DMAContext we also have access to the
corresponding AddressSpace (either because we create it just before
the DMAContext, or because dma_context_memory's AddressSpace is
trivially address_space_memory).
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now we can stop using a "translating" DMAContext, but we do not yet modify
the sPAPRTCETable users to get an AddressSpace; they keep using the table
via a DMAContext.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TCE table is currently returned as a DMAContext, and non-type-safe
APIs are called later passing back the DMAContext. Since we want to move
away from DMAContext, use an opaque type instead, and add an accessor
to retrieve the DMAContext from it.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
