In addition to DMA tests, test PIO and LBA48 command pathways in AHCI.
To accomplish this, a primitive multiplexer for gtest is added.
Though guests may prefer not to issue PIO commands directly except
for single sector cases during early boot and shutdown, these pathways
are still used for the transfer of ATAPI commands as well, and should
be behaving well.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424905602-24715-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These test a few different pathways in the AHCI code.
short: Test the minimum transfer size, exactly one sector.
simple: Test a transfer using a single PRD, in this case, 4K.
double: Test transferring 8K, which we will split up as two PRDs.
long: Test transferring a lot of data using many PRDs, 256K.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424905602-24715-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ahci_command_set_flags: Set additional flags in the command header.
ahci_command_clr_flags: Clear flags from the command header.
ahci_command_set_offset: Change the IO sector from 0.
ahci_command_adjust: Adjust many values simultaneously.
To be used to adjust the command header if the default values/guesses
were incorrect or undesirable.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424905602-24715-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[ kwolf: Fixed conflicting prototype for ahci_command_adjust() ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a routine that can be used to engage the AHCI
device at a not-granular level so that bringing up
the functionality of the HBA is easy in future tests
that are not concerned with testing the bring-up process.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424905602-24715-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Even though it's just the reserved space, make sure they're zeroes.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424905602-24715-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds tests for werror and rerror functionality
for the PCI and ISA ide buses.
Tests for the AHCI device are to be included at a later
date after requisite patches have been merged upstream
to support needed functionality by the tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1424708286-16483-18-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the AHCI HBA device is migrated, all of the information that
led to the request being created is stored in the AHCIDevice
structures, except for pointers into guest data where return
information needs to be stored.
The "cur_cmd" field is usually responsible for this.
To rebuild the cur_cmd pointer post-migration, we can utilize
the busy_slot index to figure out where the command header
we are still processing is.
This allows a machine in a halted state from rerror=stop or
werror=stop to be migrated and resume operations without issue.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-17-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is easy, since start_dma already restarts processing from the
beginning of the PRDT.
Migration is also easy to cover; the comment about busy_slot is
wrong, busy_slot will only be set if there is an error. In this
case we have nothing to do really. The core IDE code will restart
the operation and command list processing will proceed after the
erroring command has been completed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-16-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Amazingly, we weren't doing this before.
Make sure we migrate the IDEState structure that belongs to
the AHCIDevice.IDEBus structure during migrations.
No version numbering changes because AHCI is not officially
migratable (and we can all see with good reason why) so we
do not impact any official builds by altering the stream and
leaving it at version 1.
This fixes the rerror=stop/werror=stop test case where we wish
to migrate a halted job. Previously, the error code would not
migrate, so even if the job completed successfully, AHCI would
report an error because it would still have the placeholder
error code from initialization time.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-15-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-14-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-13-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Resetting the io_buffer_index to 0 is commonized,
with the exception of the case within ide_atapi_cmd_reply,
where we need to reset this index to 0 prior to the
ide_atapi_cmd_reply_end call.
Note that not all calls to ide_atapi_cmd_reply_end
expect the index to be 0, so setting it there is
not appropriate.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-12-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This only breaks backwards migration compatibility if the bus is in
an error state. It is in principle possible to avoid this by making
two subsections (one for version 1, and one for version 2, but with
the same name) with different "_needed" callbacks. The v1 callback would
return true if error_status != 0 and the bus is PATA; the v2 callback
would return true if error_status != 0 and the bus is AHCI.
Forward migration keeps working.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-11-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This moves more common restarting logic to the core IDE code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-10-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Start moving the initial state of the current request to IDEBus, so that
AHCI can use it. The set_unit callback is not used anymore once this is
done.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-9-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With restarts now handled by ide_restart_cb and
the IDEDMAOps.restart_dma() member, remove the old
restart_cb callback.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-8-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With BMDMA specific excised from the restart functions,
create a HBA-agnostic restart callback to be shared
between the different HBAs.
Change the callback registered with the vmstate_change
handler to always point to ide_restart_cb instead of
relying on the IDEDMAOps.restart_cb() member.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pass the containing IDEBus to the restart_cb instead
of the more specific BMDMAState child.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Whenever an error stops the VM, ide_handle_rw_error does
"s->bus->dma->unit = s->unit". So we can just use
idebus_active_if.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A helper is added that registers the IDEDMAOp .restart_cb()
via qemu_add_vm_change_state_handler instead of requiring
each HBA to register the callback themselves.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the restart_dma callback and adjusts
the ide_restart_dma function to utilize this callback
to call the BMDMA-specific restart code instead of statically
executing BMDMA-specific code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch begins refactoring the restart dma functions
out of bmdma to be shared with AHCI and other future
IDE HBA implementations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
geometry: hd_geometry_guess function autodetects the drive geometry.
This patch adds a block backend call, that probes the backing device
geometry. If the inner driver method is implemented and succeeds
(currently only for DASDs), the blkconf_geometry will pass-through
the backing device geometry. Otherwise will fallback to old logic.
blocksize: This patch initializes blocksize properties to 0.
In order to set the property a blkconf_blocksizes was introduced.
If user didn't set physical or logical blocksize, it will
retrieve its value from a driver (only succeeds for DASD), otherwise
it will set default 512 value.
The blkconf_blocksizes call was added to all users of BlkConf.
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424087278-49393-6-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424087278-49393-5-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce driver methods of defining disk blocksizes (physical and
logical) and hard drive geometry.
Methods are only implemented for "host_device". For "raw" devices
driver calls child's method.
For now geometry detection will only work for DASD devices. To check
that a local check_for_dasd function was introduced. It calls BIODASDINFO2
ioctl and returns its rc.
Blocksizes detection function will probe sizes for DASD devices.
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424087278-49393-4-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Put it in new probe_logical_blocksize().
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424087278-49393-3-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add driver functions for geometry and blocksize detection
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424087278-49393-2-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Background:
The blkdebug scripts are currently engineered so that when a debug
event occurs, a prefilter browses a master list of parsed rules for a
certain event and adds them to an "active list" of rules to be used for
the forthcoming action, provided the events and state numbers match.
Then, once the request is received, the last active rule is used to
inject an error if certain parameters match.
This active list is cleared every time the prefilter injects a new
rule for the first time during a debug event.
The "once" rule currently causes the error injection, if it is
triggered, to only clear the active list. This is insufficient for
preventing future injections of the same rule.
Remedy:
This patch /deletes/ the rule from the list that the prefilter
browses, so it is gone for good. In V2, we remove only the rule of
interest from the active list instead of allowing the "once" rule to
clear the entire list of active rules.
Impact:
This affects iotests 026. Several ENOSPC tests that used "once" can
be seen to have output that shows multiple failure messages. After
this patch, the error messages tend to be smaller and less severe, but
the injection can still be seen to be working. I have patched the
expected output to expect the smaller error messages.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423257977-25630-1-git-send-email-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for errors specific to certain widths (i.e. snapshots with
refcount_bits=1).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a creation option to qcow2 for setting the refcount order of images
to be created, and respect that option's value.
This breaks some test outputs, fix them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some tests do not work well with certain refcount widths (i.e. you
cannot create internal snapshots with refcount_bits=1), so make those
widths unsupported.
Furthermore, add another filter to _filter_img_create in common.filter
which filters out the refcount_bits value.
This is necessary for test 079, which does actually work with any
refcount width, but invoking qemu-img directly leads to the
refcount_bits value being visible in the output; use _make_test_img
instead which will filter it out.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_amend_options() should not compare options against some inline
strings but rather use the symbolic macros available for each of the
creation options.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a refcount_order parameter to qcow2_create2(), use that value for
the image header and for calculating the size required for
preallocation.
For now, always pass 4.
This addition requires changes to the calculation of the file size for
the "full" and "falloc" preallocation modes. That in turn is a nice
opportunity to add a comment about that calculation not necessarily
being exact (and that being intentional).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No longer refuse to open images with a different refcount entry width
than 16 bits; only reject images with a refcount width larger than 64
bits (which is prohibited by the specification).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add helper functions for getting and setting refcounts in a refcount
array for any possible refcount order, and choose the correct one during
refcount initialization.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since refcounts do not always have to be a uint16_t, all refcount blocks
and arrays in memory should not have a specific type (thus they become
pointers to void) and for accessing them, two helper functions are used
(a getter and a setter). Those functions are called indirectly through
function pointers in the BDRVQcowState so they may later be exchanged
for different refcount orders.
With the check and repair functions using this function, the refcount
array they are creating will be in big endian byte order; additionally,
using realloc_refcount_array() makes the size of this refcount array
always cluster-aligned. Both combined allow rebuild_refcount_structure()
to drop the bounce buffer which was used to convert parts of the
refcount array to big endian byte order and store them on disk. Instead,
those parts can now be written directly.
[ kwolf: Fixed a build failure on 32 bit and another with old glib ]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a helper function for reallocating a refcount array, independent of
the refcount order. The newly allocated space is zeroed and the function
handles failed reallocations gracefully.
The helper function will always align the buffer size to a cluster
boundary; if storing the refcounts in such an array in big endian byte
order, this makes it possible to write parts of the array directly as
refcount blocks into the image file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Refcounts may have a width of up to 64 bits, so qemu should use the same
width to represent refcount values internally.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
update_refcount() and qcow2_update_cluster_refcount() currently take a
signed addend. At least one caller passes a value directly derived from
an absolute refcount that should be reached ("l2_refcount - 1" in
expand_zero_clusters_in_l1()). Therefore, the addend should be unsigned
as well; this will be especially important for 64 bit refcounts.
Because update_refcount() then no longer knows whether the refcount
should be increased or decreased, it now requires an additional flag
which specified exactly that. The same applies to
qcow2_update_cluster_refcount().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Refcounts can theoretically be of type uint64_t; in order to be able to
represent the full range, qcow2_get_refcount() cannot use a single
variable to represent both all refcount values and also keep some values
reserved for errors.
One solution would be to add an Error pointer parameter to
qcow2_get_refcount(); however, no caller could (currently) pass that
error message, so it would have to be emitted immediately and be
passed to the next caller by returning -EIO or something similar.
Therefore, an Error parameter does not offer any advantages here.
The solution applied by this patch is simpler to use. Because no caller
would be able to pass the error message, they would have to print it and
free it, whereas with this patch the caller only needs to pass the
returned integer (which is often a no-op from the code perspective,
because that integer will be stored in a variable "ret" which will be
returned by the fail path of many callers).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_update_cluster_refcount() does not have any quick access to the
new refcount value, it has to call qcow2_get_refcount(). Some callers do
not need that new value at all, others call qcow2_get_refcount()
themselves anyway (albeit in a different code path, which can however be
easily changed), therefore there is no advantage in making
qcow2_update_cluster_refcount() return the new value. Drop it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the bit width of every refcount entry to the format-specific
information.
In contrast to lazy_refcounts and the corrupt flag, this should be
always emitted, even for compat=0.10 although it does not support any
refcount width other than 16 bits. This is because if a boolean is
optional, one normally assumes it to be false when omitted; but if an
integer is not specified, it is rather difficult to guess its value.
This new field breaks some test outputs, fix them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add two new fields regarding refcount information (the bit width of
every entry and the maximum refcount value) to the BDRVQcowState.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add virtio MMIO support.
Add virtio-blk-test MMIO test case.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-6-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This malloc is a basic interface implementation that works for any platform.
It should be replaced in the future for a real malloc implementation for each
of the platforms.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-5-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert PCI-specific constants names of libqos virtio driver.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-4-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Modularize functions in virtio-blk-test and add PCI suffix for PCI specific
components.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-3-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert use of pointers in functions of virtio to uint64_t in order to make it
platform-independent.
Add casting from pointers (in PCI functions) to uint64_t and vice versa through
uintptr_t.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-2-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit 1dc936aa84 (virtio-blk: Use blk_aio_ioctl) we silently lose
the request if blk_aio_ioctl returns NULL (not implemented).
Fix it by directly returning VIRTIO_BLK_S_UNSUPP as we used to do.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[ kwolf: Fixed build error on win32 ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The only user went away five years ago with commit a9420734 ('qcow2:
Simplify image creation'). It's about time to remove it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
