The device turns the Tx Descriptor into a Tx Status descriptor after
fully reading the descriptor. This involves clearing Tx Own (bit 31) to
indicate that the driver has ownership of the descriptor again as well
as several other bits.
The code keeps the first dword of the Tx Descriptor in the txdw0 local
variable. txdw0 is reused to build the first word of the Tx Status
descriptor. Later on the code uses txdw0 again, incorrectly assuming
that it still contains the first dword of the Tx Descriptor. The tx
offloading code misbehaves because it sees bogus bits in txdw0.
Use a separate local variable for Tx Status and preserve Tx Descriptor
in txdw0.
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221117165554.1773409-2-stefanha@redhat.com>
a66a24585f (hw/intc/arm_gic: Implement read of GICC_IIDR) implemented
this for the CPU interface register. The fact we don't implement it
shows up when running Xen with -d guest_error which is definitely
wrong because the guest is perfectly entitled to read it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gic_dist_readb was returning a word value which just happened to work
as a result of the way we OR the data together. Lets fix it so only
the explicit byte is returned for each part of GICD_TYPER. I've
changed the return type to uint8_t although the overflow is only
detected with an explicit -Wconversion.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Trying to run U-Boot for Cubieboard (Allwinner A10) fails because it cannot
access SD card. The problem is that FIFO register in current
allwinner-sdhost implementation is at the address corresponding to
Allwinner H3, but not A10.
Linux kernel is not affected since Linux driver uses DMA access and does
not use FIFO register for reading/writing.
This patch adds new class parameter `is_sun4i` and based on that
parameter uses register at offset 0x100 either as FIFO register (if
sun4i) or as threshold register (if not sun4i; in this case register at
0x200 is FIFO register).
Tested with U-Boot and Linux kernel image built for Cubieboard and
OrangePi PC.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221112214900.24152-1-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix typos (discovered with the 'codespell' utility).
Note: Though "migrateable" still seems to be a valid spelling, we change
it to "migratable" since this is the way more common spelling here.
Message-Id: <20221111182828.282251-1-thuth@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
With commit 39f29e5993 ("hw/intc/arm_gicv3: Use correct number of
priority bits for the CPU") the number of priority bits was changed from
the maximum value 8 to typically 5. As a consequence a few of the lowest
bits in ICC_PMR_EL1 becomes RAZ/WI. However prior to this patch one of
these bits was still used since the supplied priority value is masked
before it's eventually right shifted with one bit. So the bit is not
lost as one might expect when the register is read again.
The Linux kernel depends on lowest valid bit to be reset to zero, see
commit 33625282adaa ("irqchip/gic-v3: Probe for SCR_EL3 being clear
before resetting AP0Rn") for details.
So fix this by masking the priority value after it may have been right
shifted by one bit.
Cc: qemu-stable@nongnu.org
Fixes: 39f29e5993 ("hw/intc/arm_gicv3: Use correct number of priority bits for the CPU")
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix LoongArch check-tcg error:
TEST hello on loongarch64
qemu-system-loongarch64: Some ROM regions are overlapping
These ROM regions might have been loaded by direct user request or by default.
They could be BIOS/firmware images, a guest kernel, initrd or some other file loaded into guest memory.
Check whether you intended to load all this guest code, and whether it has been built to load to the correct addresses.
The following two regions overlap (in the memory address space):
hello ELF program header segment 0 (addresses 0x0000000000200000 - 0x0000000000242000)
fdt (addresses 0x0000000000200000 - 0x0000000000300000)
make[1]: *** [Makefile:177: run-hello] Error 1
Fixes: 021836936e ("hw/loongarch: Load FDT table into dram memory space")
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221109020449.978064-1-gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Short queue with just a single pnv-phb fix from Thomas Huth.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY24dtwAKCRA82cqW3gMx
ZNlDAQC+yqONSkYvoANSPNDuMtcK0Lk7KNXFTx5cg8ASNym0twEAkA/YuNv4t0m2
9IRfh/xJ+AhKf6VYKbUwftAsZGPTpAc=
=U0me
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20221111' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-11-11:
Short queue with just a single pnv-phb fix from Thomas Huth.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY24dtwAKCRA82cqW3gMx
# ZNlDAQC+yqONSkYvoANSPNDuMtcK0Lk7KNXFTx5cg8ASNym0twEAkA/YuNv4t0m2
# 9IRfh/xJ+AhKf6VYKbUwftAsZGPTpAc=
# =U0me
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 11 Nov 2022 05:02:31 EST
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20221111' of https://gitlab.com/danielhb/qemu:
hw/pci-host/pnv_phb: Avoid quitting QEMU if hotplug of pnv-phb-root-port fails
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Those typos are in files which are used to generate the QEMU manual.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221110190825.879620-1-sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[thuth: update sentence in can.rst as suggested by Peter]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replaces TABs with spaces, making sure to have a consistent coding style
of 4 space indentations in the net subsystem.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/377
Signed-off-by: Ahmed Abouzied <email@aabouzied.com>
Message-Id: <20210614183849.20622-1-email@aabouzied.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[thuth: Fixed mis-aligned indentation in some of the files]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Variable unconnected used in usb_host_auto_check function is only incremented
but never read as line where it is read was disabled since introducing the code.
This causes 'Unused but set variable' warning on Clang 15.0.1 compiler.
Removing the variable and disabled code to prevent the warning.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <00df0db69ff9167d38bac81f6d03281955bd861a.1668009030.git.mrezanin@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Variable n used in tulip_idblock_crc function is only incremented but never read.
This causes 'Unused but set variable' warning on Clang 15.0.1 compiler.
Removing the variable to prevent the warning.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <02e1560d115c208df32236df8916fed98429fda1.1668009030.git.mrezanin@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Variable send_count used in rtl8139_cplus_transmit_one function is only
incremented but never read. This causes 'Unused but set variable' warning
on Clang 15.0.1 compiler.
Removing the variable to prevent the warning.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <15a32dd06c492216cbf27cd3ddcbe1e9afb8d8f5.1668009030.git.mrezanin@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently QEMU terminates if you try to hotplug pnv-phb-root-port in
an environment where it is not supported, e.g. if doing this:
echo "device_add pnv-phb-root-port" | \
./qemu-system-ppc64 -monitor stdio -M powernv9
To avoid this problem, the pnv_phb_root_port_realize() function should
not use error_fatal when trying to set the properties which might not
be available.
Fixes: c2f3f78af5 ("ppc/pnv: set root port chassis and slot using Bus properties")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221109122210.115667-1-thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Run shell script:
cat << EOF | valgrind qemu-system-i386 -display none -machine accel=qtest, -m \
512M -M q35 -nodefaults -device virtio-net,netdev=net0 -netdev \
user,id=net0 -qtest stdio
outl 0xcf8 0x80000810
outl 0xcfc 0xc000
outl 0xcf8 0x80000804
outl 0xcfc 0x01
outl 0xc00d 0x0200
outl 0xcf8 0x80000890
outb 0xcfc 0x4
outl 0xcf8 0x80000889
outl 0xcfc 0x1c000000
outl 0xcf8 0x80000893
outw 0xcfc 0x100
EOF
Got:
==68666== Invalid read of size 8
==68666== at 0x688536: virtio_net_queue_enable (virtio-net.c:575)
==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492)
==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554)
==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521)
==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492)
==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554)
==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521)
==68666== by 0x6EBCD3: flatview_write_continue (physmem.c:2820)
==68666== by 0x6EBFBF: flatview_write (physmem.c:2862)
==68666== by 0x6EF5E7: address_space_write (physmem.c:2958)
==68666== by 0x6DFDEC: cpu_outw (ioport.c:70)
==68666== by 0x6F6DF0: qtest_process_command (qtest.c:480)
==68666== Address 0x29087fe8 is 24 bytes after a block of size 416 in arena "client"
That is reported by Alexander Bulekov. https://gitlab.com/qemu-project/qemu/-/issues/1309
Here, the queue_index is the index of the cvq, but in some cases cvq
does not have the corresponding NetClientState, so overflow appears.
I add a check here, ignore illegal queue_index and cvq queue_index.
Note the queue_index is below the VIRTIO_QUEUE_MAX but greater or equal
than cvq index could hit this. Other devices are similar.
Fixes: 7f863302 ("virtio-net: support queue_enable")
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1309
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20221110095739.130393-1-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
acpi-vga-stub.c pulls in vga_int.h
However that currently pulls in ui/console.h which
breaks e.g. on systems without pixman.
It's better to remove ui/console.h from vga_int.h
and directly include it where it's used.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221109222112.74519-1-mst@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Reported-by: Frederic Bezies <fredbezies@gmail.com>
Reported-by: Laurent Vivier <lvivier@redhat.com>
Fixes: cfead31326 ("AcpiDevAmlIf interface to build VGA device descs")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Commit 334c388f25 ("pflash_cfi: Error out if device length
isn't a power of two") aimed to finish the effort started by
commit 06f1521795 ("pflash: Require backend size to match device,
improve errors"), but unfortunately we are not quite there since
various machines are still ready to accept incomplete / oversized
pflash backend images, and now fail, i.e. on Debian bullseye:
$ qemu-system-x86_64 \
-drive \
if=pflash,format=raw,unit=0,readonly=on,file=/usr/share/OVMF/OVMF_CODE.fd
qemu-system-x86_64: Device size must be a power of two.
where OVMF_CODE.fd comes from the ovmf package, which doesn't
pad the firmware images to the flash size:
$ ls -lh /usr/share/OVMF/
-rw-r--r-- 1 root root 3.5M Aug 19 2021 OVMF_CODE_4M.fd
-rw-r--r-- 1 root root 1.9M Aug 19 2021 OVMF_CODE.fd
-rw-r--r-- 1 root root 128K Aug 19 2021 OVMF_VARS.fd
Since we entered the freeze period to prepare the v7.2.0 release,
the safest is to revert commit 334c388f25.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1294
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221108175755.95141-1-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221108172633.860700-1-danielhb413@gmail.com>
The TABs should be replaced with spaces, to make sure that we have a
consistent coding style with an indentation of 4 spaces everywhere.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370
Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com>
Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The TABs should be replaced with spaces, to make sure that we have a
consistent coding style with an indentation of 4 spaces everywhere.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370
Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com>
Message-Id: <5cefd05b4d3721d416e48e6df19df18cb6338933.1666707782.git.amarjargal16@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
zPCI enhancement features (interpretation and forward assist) were
recently introduced to improve performance on PCI passthrough devices.
To maintain the same behaviour on older Z machines, deactivate the
features with the associated properties.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20221107161349.1032730-3-clg@kaod.org>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 59d1ce4439.
The "zpcii-disable" machine property is redundant with the "interpret"
zPCI device property. Remove it for clarification.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20221107161349.1032730-2-clg@kaod.org>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
lots of acpi rework
first version of biosbits infrastructure
ASID support in vhost-vdpa
core_count2 support in smbios
PCIe DOE emulation
virtio vq reset
HMAT support
part of infrastructure for viommu support in vhost-vdpa
VTD PASID support
fixes, tests all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNpXDkPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpD0AH/2G8ZPrgrxJC9y3uD5/5J6QRzO+TsDYbg5ut
uBf4rKSHHzcu6zdyAfsrhbAKKzyD4HrEGNXZrBjnKM1xCiB/SGBcDIWntwrca2+s
5Dpbi4xvd4tg6tVD4b47XNDCcn2uUbeI0e2M5QIbtCmzdi/xKbFAfl5G8DQp431X
Kmz79G4CdKWyjVlM0HoYmdCw/4FxkdjD02tE/Uc5YMrePNaEg5Bw4hjCHbx1b6ur
6gjeXAtncm9s4sO0l+sIdyiqlxiTry9FSr35WaQ0qPU+Og5zaf1EiWfdl8TRo4qU
EAATw5A4hyw11GfOGp7oOVkTGvcNB/H7aIxD7emdWZV8+BMRPKo=
=zTCn
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pci,pc,virtio: features, tests, fixes, cleanups
lots of acpi rework
first version of biosbits infrastructure
ASID support in vhost-vdpa
core_count2 support in smbios
PCIe DOE emulation
virtio vq reset
HMAT support
part of infrastructure for viommu support in vhost-vdpa
VTD PASID support
fixes, tests all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNpXDkPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpD0AH/2G8ZPrgrxJC9y3uD5/5J6QRzO+TsDYbg5ut
# uBf4rKSHHzcu6zdyAfsrhbAKKzyD4HrEGNXZrBjnKM1xCiB/SGBcDIWntwrca2+s
# 5Dpbi4xvd4tg6tVD4b47XNDCcn2uUbeI0e2M5QIbtCmzdi/xKbFAfl5G8DQp431X
# Kmz79G4CdKWyjVlM0HoYmdCw/4FxkdjD02tE/Uc5YMrePNaEg5Bw4hjCHbx1b6ur
# 6gjeXAtncm9s4sO0l+sIdyiqlxiTry9FSr35WaQ0qPU+Og5zaf1EiWfdl8TRo4qU
# EAATw5A4hyw11GfOGp7oOVkTGvcNB/H7aIxD7emdWZV8+BMRPKo=
# =zTCn
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 07 Nov 2022 14:27:53 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (83 commits)
checkpatch: better pattern for inline comments
hw/virtio: introduce virtio_device_should_start
tests/acpi: update tables for new core count test
bios-tables-test: add test for number of cores > 255
tests/acpi: allow changes for core_count2 test
bios-tables-test: teach test to use smbios 3.0 tables
hw/smbios: add core_count2 to smbios table type 4
vhost-user: Support vhost_dev_start
vhost: Change the sequence of device start
intel-iommu: PASID support
intel-iommu: convert VTD_PE_GET_FPD_ERR() to be a function
intel-iommu: drop VTDBus
intel-iommu: don't warn guest errors when getting rid2pasid entry
vfio: move implement of vfio_get_xlat_addr() to memory.c
tests: virt: Update expected *.acpihmatvirt tables
tests: acpi: aarch64/virt: add a test for hmat nodes with no initiators
hw/arm/virt: Enable HMAT on arm virt machine
tests: Add HMAT AArch64/virt empty table files
tests: acpi: q35: update expected blobs *.hmat-noinitiators expected HMAT:
tests: acpi: q35: add test for hmat nodes without initiators
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The previous fix to virtio_device_started revealed a problem in its
use by both the core and the device code. The core code should be able
to handle the device "starting" while the VM isn't running to handle
the restoration of migration state. To solve this duel use introduce a
new helper for use by the vhost-user backends who all use it to feed a
should_start variable.
We can also pick up a change vhost_user_blk_set_status while we are at
it which follows the same pattern.
Fixes: 9f6bcfd99f (hw/virtio: move vm_running check to virtio_device_started)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Message-Id: <20221107121407.1010913-1-alex.bennee@linaro.org>
In order to use the increased number of cpus, we need to bring smbios
tables in line with the SMBIOS 3.0 specification. This allows us to
introduce core_count2 which acts as a duplicate of core_count if we have
fewer cores than 256, and contains the actual core number per socket if
we have more.
core_enabled2 and thread_count2 fields work the same way.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220731162141.178443-2-jusual@redhat.com>
Message-Id: <20221011111731.101412-2-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The motivation of adding vhost-user vhost_dev_start support is to
improve backend configuration speed and reduce live migration VM
downtime.
Today VQ configuration is issued one by one. For virtio net with
multi-queue support, backend needs to update RSS (Receive side
scaling) on every rx queue enable. Updating RSS is time-consuming
(typical time like 7ms).
Implement already defined vhost status and message in the vhost
specification [1].
(a) VHOST_USER_PROTOCOL_F_STATUS
(b) VHOST_USER_SET_STATUS
(c) VHOST_USER_GET_STATUS
Send message VHOST_USER_SET_STATUS with VIRTIO_CONFIG_S_DRIVER_OK for
device start and reset(0) for device stop.
On reception of the DRIVER_OK message, backend can apply the needed setting
only once (instead of incremental) and also utilize parallelism on enabling
queues.
This improves QEMU's live migration downtime with vhost user backend
implementation by great margin, specially for the large number of VQs of 64
from 800 msec to 250 msec.
[1] https://qemu-project.gitlab.io/qemu/interop/vhost-user.html
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20221017064452.1226514-3-yajunw@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch is part of adding vhost-user vhost_dev_start support. The
motivation is to improve backend configuration speed and reduce live
migration VM downtime.
Moving the device start routines after finishing all the necessary device
and VQ configuration, further aligning to the virtio specification for
"device initialization sequence".
Following patch will add vhost-user vhost_dev_start support.
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20221017064452.1226514-2-yajunw@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduce ECAP_PASID via "x-pasid-mode". Based on the
existing support for scalable mode, we need to implement the following
missing parts:
1) tag VTDAddressSpace with PASID and support IOMMU/DMA translation
with PASID
2) tag IOTLB with PASID
3) PASID cache and its flush
4) PASID based IOTLB invalidation
For simplicity PASID cache is not implemented so we can simply
implement the PASID cache flush as a no and leave it to be implemented
in the future. For PASID based IOTLB invalidation, since we haven't
had L1 stage support, the PASID based IOTLB invalidation is not
implemented yet. For PASID based device IOTLB invalidation, it
requires the support for vhost so we forbid enabling device IOTLB when
PASID is enabled now. Those work could be done in the future.
Note that though PASID based IOMMU translation is ready but no device
can issue PASID DMA right now. In this case, PCI_NO_PASID is used as
PASID to identify the address without PASID. vtd_find_add_as() has
been extended to provision address space with PASID which could be
utilized by the future extension of PCI core to allow device model to
use PASID based DMA translation.
This feature would be useful for:
1) prototyping PASID support for devices like virtio
2) future vPASID work
3) future PRS and vSVA work
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-5-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to have a macro for VTD_PE_GET_FPD_ERR() but it has an
internal goto which prevents it from being reused. This patch convert
that macro to a dedicated function and let the caller to decide what
to do (e.g using goto or not). This makes sure it can be re-used for
other function that requires fault reporting.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-4-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
We introduce VTDBus structure as an intermediate step for searching
the address space. This works well with SID based matching/lookup. But
when we want to support SID plus PASID based address space lookup,
this intermediate steps turns out to be a burden. So the patch simply
drops the VTDBus structure and use the PCIBus and devfn as the key for
the g_hash_table(). This simplifies the codes and the future PASID
extension.
To prevent being slower for past vtd_find_as_from_bus_num() callers, a
vtd_as cache indexed by the bus number is introduced to store the last
recent search result of a vtd_as belongs to a specific bus.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-3-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
We use to warn on wrong rid2pasid entry. But this error could be
triggered by the guest and could happens during initialization. So
let's don't warn in this case.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
- Move the implement vfio_get_xlat_addr to softmmu/memory.c, and
change the name to memory_get_xlat_addr(). So we can use this
function on other devices, such as vDPA device.
- Add a new function vfio_get_xlat_addr in vfio/common.c, and it will check
whether the memory is backed by a discard manager. then device can
have its own warning.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221031031020.1405111-2-lulu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since the patchset ("Build ACPI Heterogeneous Memory Attribute Table (HMAT)"),
HMAT is supported, but only x86 is enabled. Enable HMAT on arm virt machine.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221027100037.251-7-hesham.almatary@huawei.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The code currently assumes Q35 iff ICH9 and i440fx iff PIIX. Now that more
AML generation has been moved into the south bridges and since the
machines define themselves primarily through their north bridges, let's
switch to resolving the north bridges for AML generation instead. This
also allows for easier experimentation with different south bridges in
the "pc" machine, e.g. with PIIX4 and VT82xx.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221028103419.93398-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The is_piix4 attribute is set once in one location and read once in
another. Doing both in one location allows for removing the attribute
altogether.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221026133110.91828-3-shentey@gmail.com>
Message-Id: <20221028103419.93398-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ammends commit b23046abe7 'pc: acpi-build:
simplify PCI bus tree generation'.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221026133110.91828-2-shentey@gmail.com>
Message-Id: <20221028103419.93398-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Early-boot e820 records will be inserted by the bios/efi/early boot
software and be reported to the kernel via insert_resource. Later, when
CXL drivers iterate through the regions again, they will insert another
resource and make the RESERVED memory area a child.
This RESERVED memory area causes the memory region to become unusable,
and as a result attempting to create memory regions with
`cxl create-region ...`
Will fail due to the RESERVED area intersecting with the CXL window.
During boot the following traceback is observed:
0xffffffff81101650 in insert_resource_expand_to_fit ()
0xffffffff83d964c5 in e820__reserve_resources_late ()
0xffffffff83e03210 in pcibios_resource_survey ()
0xffffffff83e04f4a in pcibios_init ()
Which produces a call to reserve the CFMWS area:
(gdb) p *new
$54 = {start = 0x290000000, end = 0x2cfffffff, name = "Reserved",
flags = 0x200, desc = 0x7, parent = 0x0, sibling = 0x0,
child = 0x0}
Later the Kernel parses ACPI tables and reserves the exact same area as
the CXL Fixed Memory Window:
0xffffffff811016a4 in insert_resource_conflict ()
insert_resource ()
0xffffffff81a81389 in cxl_parse_cfmws ()
0xffffffff818c4a81 in call_handler ()
acpi_parse_entries_array ()
(gdb) p/x *new
$59 = {start = 0x290000000, end = 0x2cfffffff, name = "CXL Window 0",
flags = 0x200, desc = 0x0, parent = 0x0, sibling = 0x0,
child = 0x0}
This produces the following output in /proc/iomem:
590000000-68fffffff : CXL Window 0
590000000-68fffffff : Reserved
This reserved area causes `get_free_mem_region()` to fail due to a check
against `__region_intersects()`. Due to this reserved area, the
intersect check will only ever return REGION_INTERSECTS, which causes
`cxl create-region` to always fail.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Message-Id: <20221026205912.8579-1-gregory.price@memverge.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There were several different ways to deal with the situation where the
vector specified for a msix function is out of bound:
- early return a function and keep progresssing
- propagate the error to the caller
- mark msix unusable
- assert it is in bound
- just ignore
An out-of-bound vector should not be specified if the device
implementation is correct so let msix functions always assert that the
specified vector is in range.
An exceptional case is virtio-pci, which allows the guest to configure
vectors. For virtio-pci, it is more appropriate to introduce its own
checks because it is sometimes too late to check the vector range in
msix functions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20220829083524.143640-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Signed-off-by: Akihiko Odaki <<a href="mailto:akihiko.odaki@daynix.com" target="_blank">akihiko.odaki@daynix.com</a>><br>
- Fix memset argument order: The second argument is
the value, the length goes last.
- Fix an integer overflow reported by Alexander Bulekov.
Both issues allow the guest to overrun the host buffer
allocated for the ERST memory device.
Cc: Eric DeVolder <eric.devolder@oracle.com
Cc: Alexander Bulekov <alxndr@bu.edu>
Cc: qemu-stable@nongnu.org
Fixes: f7e26ffa59 ("ACPI ERST: support for ACPI ERST feature")
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Message-Id: <20221024154233.1043347-1-lk@c--e.de>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1268
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move _GPE block declaration before it gets referenced by other
hotplug handlers. While at it move PCI hotplug (_E01) handler
after PCI tree description to avoid forward reference to
to not yet declared methods/devices.
PS:
Forward 'usage' usualy is fine as long as it's hidden within
method, however 'iasl' may print warnings. So be nice
to iasl/guest OS and do things in proper order.
PS2: Also follow up patches will move some of hotplug code
from PCI tree to _E01 and that also requires PCI Device
nodes build first, before Scope can reuse that from
global context.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
to make that happen (bridge sits at _ADR: 0x001F0003),
relax PCI enumeration logic to include devices with *function* > 0
if device has something to say about itself (i.e. has build_dev_aml
callback set).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI-ISA bridges that are built in PIIX/Q35 are building its own AML
using AcpiDevAmlIf interface. Now build_append_pci_bus_devices()
gained AcpiDevAmlIf interface support to get AML of devices atached
to PCI slots.
So drop ad-hoc build_q35_isa_bridge()/build_piix4_isa_bridge()
and let PCI bus enumeration to include PCI-ISA bridge AML
when it's enumerated by build_append_pci_bus_devices().
AML change is mostly contextual, which moves whole ISA hierarchy
directly under PCI host bridge instead of it being described
as separate \SB.PCI0.ISA block.
Note:
If bus/slot that hosts ISA bridge has BSEL set, it will gain new
ASUN and _DMS entries (i.e. acpi-index support, but it should not
cause any functional change and that is fine from PCI Firmware
spec point of view), potentially it's possible to suppress that
by adding a flag to PCIDevice but I don't see a reason to do that
yet, I'd rather treat bridge just as any other PCI device if it's
possible.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
NB:
We do not expect any functional change in any ACPI tables with this
change. It's only a refactoring.
NB2:
Some targets (or1k) do not support acpi and CONFIG_ACPI is off for them.
However, modules are reused between all architectures so CONFIG_ACPI is
on. For those architectures, dummy stub function definitions help to
resolve symbols. This change uses more of these and so it adds a couple
of dummy stub definitions so that symbols for those can be resolved.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
CC: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221107152744.868434-1-ani@anisinha.ca>
vhost backend sends host notification for every VQ. If backend creates
VQs in parallel, the VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG may
arrive to QEMU in different order than incremental queue index order.
For example VQ 1's message arrive earlier than VQ 0's:
After alloc VhostUserHostNotifier for VQ 1. GPtrArray becomes
[ nil, VQ1 pointer ]
After alloc VhostUserHostNotifier for VQ 0. GPtrArray becomes
[ VQ0 pointer, nil, VQ1 pointer ]
This is wrong. fetch_notifier will return NULL for VQ 1 in
vhost_user_get_vring_base, causes host notifier miss removal(leak).
The fix is to remove current element from GPtrArray, make the right
position for element to insert.
Fixes: 503e355465 ("virtio/vhost-user: dynamically assign VhostUserHostNotifiers")
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20221018023651.1359420-1-yajunw@nvidia.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Most other virtio-pci devices allow MSI-X, let's have it for rng too.
Signed-off-by: David Daney <david.daney@fungible.com>
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@fungible.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@fungible.com>
Message-Id: <20221014160947.66105-1-philmd@fungible.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add virtqueue reset feature for virtio-net
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20221017092558.111082-16-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add virtqueue reset feature for vhost-kernel.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-15-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
