Add tests that validate it is possible to connect to an NBD server
running TLS mode. Also test mis-matched TLS vs non-TLS connections
correctly fail.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-7-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to iotests shell cleanups, use ss instead of socat for
port probing, sanitize port number in expected output]
Signed-off-by: Eric Blake <eblake@redhat.com>
Add helpers to common.tls for creating TLS certificates for a CA,
server and client.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-6-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: spelling and quoting touchups]
Signed-off-by: Eric Blake <eblake@redhat.com>
If the qemu-nbd UNIX socket has not shown up, the tests will sleep a bit
and then check again repeatedly for up to 30 seconds. This is pointless
if the qemu-nbd process has quit due to an error, so check whether the
pid is still alive before waiting and retrying.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-5-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The helpers for starting/stopping qemu-nbd in 058 will be useful in
other test cases, so move them into a common.nbd file.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-4-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix shell quoting]
Signed-off-by: Eric Blake <eblake@redhat.com>
Various shell files contain a mix between obsolete ``
and modern $(); It would be nice to convert to using
$() everywhere. For now, just do the qemu-iotests directory.
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-4-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
POSIX requires $PWD to be reliable, and we expect all
shells used by qemu scripts to be relatively close to
POSIX. Thus, it is smarter to avoid forking the pwd
executable for something that is already available in
the environment.
So replace it with the following:
sed -i 's/\(`pwd`\|\$(pwd)\)/$PWD/g' $(git grep -l pwd)
Then delete a pointless line assigning PWD to itself.
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-2-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, tweak a couple more files]
Signed-off-by: Eric Blake <eblake@redhat.com>
Running
git grep '\$here' tests/qemu-iotests
has 0 hits, which means we are setting a variable that has
no use. It appears that commit e8f8624d removed the last
use. So execute the following cmd to remove all of
the 'here=...' lines as dead code.
sed -i '/^here=/d' $(git grep -l '^here=' tests/qemu-iotests)
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-3-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
If you have a capable file system (tmpfs is good, ext4 not so much;
run ./check with TEST_DIR pointing to a good location so as not
to skip the test), it's actually possible to create a qcow2 file
that expands to a sparse 512T image with just over 38M of content.
The test is not the world's fastest (qemu crawling through 256M
bits of refcount table to find the next cluster to allocate takes
several seconds, as does qemu-img check reporting millions of
leaked clusters); but it DOES catch the problem that the previous
patch just fixed where writing a compressed cluster to a full
image ended up overwriting the wrong cluster.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJb7XzBAAoJEHWtZYAqC0IR3EsIAM6zSEaYlo5fh/VX4KCorYDT
4nb8agEgVdEP4qdRG2PGPeSvN3D63IEgAhR8dugUs8bGey1MU9SEctb5BR5XdJ3c
WEh6x7kNazN7Gsu1R5j0ApBnKh7jfObBVgKMc0c3i2TmAQMypwiZY6GJuLcvgAhV
NJHf8ldu6ephOwForYqerItTD3Cf2Pe0rmggRTEL5LFLgfGW2oem+fwSWLHbyjoC
qKoQDNZ1d+DatJIz92iygUeF1TDhhOa9+QCW3HujAw5v2DFSbSDtlsU7yf5AKJ11
/g91DQOK37vEd9Bhu9Z4bEeeoV2DHGCY18WpV4KESG1GYix14kVhd5goxF3A0II=
=Sw53
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2018-11-15-1' into staging
Merge tpm 2018/11/15 v1
# gpg: Signature made Thu 15 Nov 2018 14:03:45 GMT
# gpg: using RSA key 75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2018-11-15-1:
tests: tpm: Use g_test_message rather than fprintf
tpm: use loop iterator to set sts data field
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Display a message during the test using g_test_message rather
than fprintf.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Fix:
TEST linux-test on i386
.../tests/tcg/multiarch/linux-test.c:201: readdir
readdir() calls getdents64() to have the list of the entries in a
directory, and getdents64() can return 64bit d_off values (with ext4,
for instance) that will not fit in the 32bit d_off field of the
readdir() dirent structure.
To avoid that, use readdir64() to use a 64bit d_off field too.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
You should declare you are using a global version of a variable before
you attempt to modify it in a function.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181109152119.9242-5-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When you clone the repository without previous commit history, 'git://'
doesn't protect from man-in-the-middle attacks. HTTPS is more secure
since the client verifies the server certificate.
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Suggested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20181108111531.30671-9-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The $(SHELLSTATUS) variable requires GNU make >= 4.2, but Travis
seems to provide an older version. Change the existing rules to
use command output instead of exit code, to make it compatible
with older GNU make versions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
AMD IOMMU VAPIC support + fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJb4IrKAAoJECgfDbjSjVRp9xEIAIT25r0SeThU32cl8955dBu3
L2q2e+4du4KcwrC1a65mhBeATFtRthL/cWFHf1rvmwsp1t6ib+uVBH/3ezH1b48o
rhrPjysYGbX+M/gxHv8uBM01JnMnmsaZVJv2iAifkO1fjJ5VCWXqJt89y7VryeUz
LRzN1Zzq84umDXUuqptBKI8MF8ySwqnRHCE6YrbpTAppaJRY8zIyWkQzMd+Ls9m/
Rwuo6QiySD4z5WrnL2hpvUCQw2qDTct9xDNrlGpxL1JVvOgo5Y5VFkF2X9IP7qap
TIC7Y9cfUjGNf8ferYsydgzpyTjFrBMUqqcu65HjUlpACXwwwrLHPScfpT37VJI=
=WPCi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, features
AMD IOMMU VAPIC support + fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 05 Nov 2018 18:24:10 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (33 commits)
vhost-scsi: prevent using uninitialized vqs
piix_pci: fix i440fx data sheet link
piix: use TYPE_FOO constants than string constats
i440fx: use ARRAY_SIZE for pam_regions
pci_bridge: fix typo in comment
hw/pci: Add missing include
hw/pci-bridge/ioh3420: Remove unuseful header
hw/pci-bridge/xio3130: Remove unused functions
tests/bios-tables-test: add 64-bit PCI MMIO aperture round-up test on Q35
bios-tables-test: prepare expected files for mmio64
hw/pci-host/x86: extend the 64-bit PCI hole relative to the fw-assigned base
hw/pci-host/x86: extract get_pci_hole64_start_value() helpers
pci-testdev: add optional memory bar
MAINTAINERS: list "tests/acpi-test-data" files in ACPI/SMBIOS section
x86_iommu/amd: Enable Guest virtual APIC support
x86_iommu/amd: Add interrupt remap support when VAPIC is enabled
i386: acpi: add IVHD device entry for IOAPIC
x86_iommu/amd: Add interrupt remap support when VAPIC is not enabled
x86_iommu/amd: Prepare for interrupt remap support
x86_iommu/amd: make the address space naming consistent with intel-iommu
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 9fa99d2519 ("hw/pci-host: Fix x86 Host Bridges 64bit PCI
hole", 2017-11-16), we meant to expose such a 64-bit PCI MMIO aperture in
the ACPI DSDT that would be at least as large as the new "pci-hole64-size"
property (2GB on i440fx, 32GB on q35). The goal was to offer "enough"
64-bit MMIO aperture to the guest OS for hotplug purposes.
Previous patch fixed the issue that the aperture is extended relative to
a possibly incorrect base. This may result in an aperture size that is
smaller than the intent of commit 9fa99d2519.
This patch adds a test to make sure it won't happen again.
In the test case being added:
- use 128 MB initial RAM size,
- ask for one DIMM hotplug slot,
- ask for 2 GB maximum RAM size,
- use a pci-testdev with a 64-bit BAR of 2 GB size.
Consequences:
(1) In pc_memory_init() [hw/i386/pc.c], the DIMM hotplug area size is
initially set to 2048-128 = 1920 MB. (Maximum RAM size minus initial
RAM size.)
(2) The DIMM area base is set to 4096 MB (because the initial RAM is only
128 MB -- there is no initial "high RAM").
(3) Due to commit 085f8e88ba ("pc: count in 1Gb hugepage alignment when
sizing hotplug-memory container", 2014-11-24), we add 1 GB for the one
DIMM hotplug slot that was specified. This sets the DIMM area size to
1920+1024 = 2944 MB.
(4) The reserved-memory-end address (exclusive) is set to 4096 + 2944 =
7040 MB (DIMM area base plus DIMM area size).
(5) The reserved-memory-end address is rounded up to GB alignment,
yielding 7 GB (7168 MB).
(6) Given the 2 GB BAR size of pci-testdev, SeaBIOS allocates said 64-bit
BAR in 64-bit address space.
(7) Because reserved-memory-end is at 7 GB, it is unaligned for the 2 GB
BAR. Therefore SeaBIOS allocates the BAR at 8 GB. QEMU then
(correctly) assigns the root bridge aperture base this BAR address, to
be exposed in \_SB.PCI0._CRS.
(8) The intent of commit 9fa99d2519 dictates that QEMU extend the
aperture size to 32 GB, implying a 40 GB end address. However, QEMU
performs the extension relative to reserved-memory-end (7 GB), not
relative to the bridge aperture base that was correctly deduced from
SeaBIOS's BAR programming (8 GB). Therefore we see 39 GB as the
aperture end address in \_SB.PCI0._CRS:
> QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
> 0x0000000000000000, // Granularity
> 0x0000000200000000, // Range Minimum
> 0x00000009BFFFFFFF, // Range Maximum
> 0x0000000000000000, // Translation Offset
> 0x00000007C0000000, // Length
> ,, , AddressRangeMemory, TypeStatic)
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently tests/hex-loader-check-data contains data files used
by the hexloader-test, and configure individually symlinks those
data files into the build directory using a wildcard.
Using a wildcard like this is a bad idea, because if a new
data file is added, nothing causes configure to be rerun,
and so no symlink is added for the new file. This can cause
tests to spuriously fail when they can't find their data.
Instead, it's better to symlink an entire directory of
data files. We already have such a directory: tests/data.
Move the data files from tests/hex-loader-check-data/ to
tests/data/hex-loader/, and remove the unnecessary symlinking.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently tests/acpi-test-data contains data files used by the
bios-tables-test, and configure individually symlinks those
data files into the build directory using a wildcard.
Using a wildcard like this is a bad idea, because if a new
data file is added, nothing causes configure to be rerun,
and so no symlink is added for the new file. This can cause
tests to spuriously fail when they can't find their data.
Instead, it's better to symlink an entire directory of
data files. We already have such a directory: tests/data.
Move the data files from tests/acpi-test-data/ to
tests/data/acpi/, and remove the unnecessary symlinking.
We can remove entirely the note in rebuild-expected-aml.sh
about copying any new data files, because now they will
be in the source directory, not the build directory, and
no copying is required.
(We can't just change the existing tests/acpi-test-data/
to being a symlinked directory, because if we did that and
a developer switched git branches from one after that change
to one before it then configure would end up trashing all
the test files by making them symlinks to themselves.
Changing their path avoids this annoyance.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds some whitespace into the option help (including indentation)
and puts angle brackets around the type names. Furthermore, the list
name is no longer printed as part of every line, but only once in
advance, and only if the caller did not print a caption already.
This patch also restores the description alignment we had before commit
9cbef9d68e, just at 24 instead of 16 characters like we used to.
This increase is because now we have the type and two spaces of
indentation before the description, and with a usual type name length of
three chracters, this sums up to eight additional characters -- which
means that we now need 24 characters to get the same amount of padding
for most options. Also, 24 is a third of 80, which makes it kind of a
round number in terminal terms.
Finally, this patch amends the reference output of iotest 082 to match
the changes (and thus makes it pass again).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch tests that you can add and remove drives from a Quorum
using the x-blockdev-change command.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While testing the Python 3 changes which touch the 083 test, I noticed
that it would fail with qcow2. Expanding the testing, I noticed it
had nothing to do with the Python 3 changes, and in fact, it would not
pass on anything but raw:
raw: pass
bochs: not generic
cloop: not generic
parallels: fail
qcow: fail
qcow2: fail
qed: fail
vdi: fail
vhdx: fail
vmdk: fail
vpc: fail
luks: fail
The errors are a mixture I/O and "image not in xxx format", such as:
=== Check disconnect before data ===
Unexpected end-of-file before all bytes were read
-read failed: Input/output error
+can't open device nbd+tcp://127.0.0.1:PORT/foo: Could not open 'nbd://127.0.0.1:PORT/foo': Input/output error
=== Check disconnect after data ===
-read 512/512 bytes at offset 0
-512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+can't open device nbd+tcp://127.0.0.1:PORT/foo: Image not in qcow format
I'm not aware if there's a quick fix, so, for the time being, it looks
like the honest approach is to make the test known to work on raw
only.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
New mini-kernel test for nRF51 SoC UART.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJb2M/IAAoJEHWtZYAqC0IRu5AIAKR7lDJ9nPDqoCOvc4hAY6TV
Zd986geEGiwrsFJ/CXbXXMsM7aUP+Qq717wekkZFghjtsfG83S+JWROZo2b8AUsI
Atq0T/G6BLWFvdzW6sCtfo8zCrhj3EFJpFWTYCIrNHDB6rs1R9bbuR/Bt2h7tpDh
CAmUkbumVUvanG4oklaRrwWfN7GksVhxAqX41PHaJAACww6UkNLzkWDJ5eQswvG6
nzEtWGQU41FqdcL+5E7nH6IEEGb4MnTkAftIab5Phr+lMWnd3mN0/tiY0wgVCDbP
OGBxOiPDxRbO4m7EH9iigFL+Xz3eZz3m6mnjmD+Ss29JkROF4Rn1E5FuJIDxiic=
=SyrU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2018-10-29-2' into staging
Merge tpm 2018/10/29 v2
# gpg: Signature made Tue 30 Oct 2018 21:40:24 GMT
# gpg: using RSA key 75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2018-10-29-2:
tpm: Zero-init structure to avoid uninitialized variables in valgrind log
MAINTAINERS: Change my email address to the new domain
docs: tpm: Mention implemented TPM CRB interface emulation and specs
tests/tpm: Display if swtpm is not found or --tpm2 not supported
tests/tpm: fix tpm_util_swtpm_has_tpm2()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test order:
Creating server websocket chardev
Creating usual tcp chardev client
Sending handshake message from client
Receiving handshake reply
Sending ping frame with "hello" payload
Receiving pong reply
Sending binary data "world"
Checking the received data on server side
Checking of closing handshake
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <20181018223501.21683-4-jusual@mail.ru>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The acceptance (aka functional, aka Avocado-based) tests are
Python files located in "tests/acceptance" that need to be run
with the Avocado libs and test runner.
Let's provide a convenient way for QEMU developers to run them,
by making use of the tests-venv with the required setup.
Also, while the Avocado test runner will take care of creating a
location to save test results to, it was understood that it's better
if the results are kept within the build tree.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20181018153134.8493-3-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
A number of QEMU tests are written in Python, and may benefit
from an untainted Python venv.
By using make rules, tests that depend on specific Python libs
can set that rule as a requirement, along with rules that require
the presence or installation of specific libraries.
The tests/requirements.txt is supposed to contain the Python
requirements that should be added to the venv created by check-venv.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20181018153134.8493-2-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There are two imports that need to be modified when running the iotests
under Python 3: One is StringIO, which no longer exists; instead, the
StringIO class comes from the io module, so import it from there (and
use the BytesIO class for Python 2). The other is the ConfigParser,
which has just been renamed to configparser.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-9-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
iotest 169 uses the 'new' module to add methods to a class. This module
no longer exists in Python 3. Instead, we can use a lambda. Best of
all, this works in 2.7 just as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-8-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Python 3.4 introduced the inheritable attribute for FDs. At the same
time, it changed the default so that all FDs are not inheritable by
default, that only inheritable FDs are inherited to subprocesses, and
only if close_fds is explicitly set to False.
Adhere to this by setting close_fds to False when working with
subprocesses that may want to inherit FDs, and by trying to
set_inheritable() on FDs that we do want to bequeath to them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-7-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In Python 3, several functions now return iterators instead of lists.
This includes range(), items(), map(), and filter(). This means that if
we really want a list, we have to wrap those instances with list(). But
then again, the two instances where this is the case for map() and
filter(), there are shorter expressions which work without either
function.
On the other hand, sometimes we do just want an iterator, in which case
we have sometimes used xrange() and iteritems() which no longer exist in
Python 3. Just change these calls to be range() and items(), works in
both Python 2 and 3, and is really what we want in 3 (which is what
matters). But because it is so simple to do (and to find and remove
once we completely switch to Python 3), make range() be an alias for
xrange() in the two affected tests (044 and 163).
In one instance, we only wanted the first instance of the result of a
filter() call. Instead of using next(filter()) which would work only in
Python 3, or list(filter())[0] which would work everywhere but is a bit
weird, this instance is changed to use a generator expression with a
next() wrapped around, which works both in 2.7 and 3.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-6-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In Python 3, / is always a floating-point division. We usually do not
want this, and as Python 2.7 understands // as well, change all integer
divisions to use that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-5-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Since byte strings are no longer the default in Python 3, we have to
explicitly use them where we need to, which is mostly when working with
structures. It also means that we need to open a file in binary mode
when we want to use structures.
On the other hand, we have to accomodate for the fact that some
functions (still) work with byte strings but we want to use unicode
strings (in Python 3 at least, and it does not matter in Python 2).
This includes base64 encoding, but it is most notable when working with
the subprocess module: Either we set universal_newlines to True so that
the default streams are opened in text mode (hence this parameter is
aliased as "text" as of 3.7), or, if that is not possible, we have to
decode the output to a normal string.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20181022135307.14398-4-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
After issuing a command, flush the pipe. This does not change anything
in Python 2, but it makes a difference in Python 3.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-3-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When closing a connection, make the nbd-fault-injector flush the socket.
Without this, the output is a bit unreliable with Python 3.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181022135307.14398-2-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
If swtpm is not found in $PATH or --tpm2 isn't supported, we display
this in the test log. We cannot mark the test as skipped due to a bug in
certain versions of the gtester environment that interprets a skipped test
as failure.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
-----BEGIN PGP SIGNATURE-----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=sHPv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging
QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
# gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request:
milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report
ppc: move at24c to its own CONFIG_ symbol
hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro
hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro
tests/bios-tables-test: Remove an useless cast
xen: Use the PCI_DEVICE macro
qobject: Catch another straggler for use of qdict_put_str()
configure: Support pkg-config for zlib
tests: Fix typos in comments and help message (found by codespell)
cpu.h: fix a typo in comment
linux-user: fix comment s/atomic_write/atomic_set/
qemu-iotests: make 218 executable
scripts/qemu.py: remove trailing quotes on docstring
scripts/decodetree.py: remove unused imports
docs/devel/testing.rst: add missing newlines after code block
qemu-iotests: fix filename containing checks
tests/tcg/README: fix location for lm32 tests
memory.h: fix typos in comments
vga_int: remove unused function protype
configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test that we can resume source vm after [failed] migration, and bitmaps
are ok.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Before previous patch, iotest 169 was actually broken for the case
test_persistent__not_migbitmap__offline_shared, while formally
passing.
After migration log of vm_b had message:
qemu-system-x86_64: Could not reopen qcow2 layer: Bitmap already
exists: bitmap0
which means that invalidation failed and bs->drv = NULL.
It was because we've loaded bitmap twice: on open and on invalidation.
Add code to 169, to catch such fails.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
One fix for mingw build and some improvements in VM based testing, many thanks
to Paolo and Phil.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEEUAN8t5cGD3bwIa1WyjViTGqRccYFAlvTIXEQHGZhbXpAcmVk
aGF0LmNvbQAKCRDKNWJMapFxxlRqB/99FX5texTlvPy2yH8jC6eXWt1XzcqVc9Ei
TPHJ3LLR7EqjTBD/NCgvRzed4D0U2uRm8rXssujJPUnqt9hmlpNPzIEqLeV650hB
QBWWC8rrxzPMGKbQzBE0b/bbAaXW4KFsBXicmrTJz6MCN12S4yGwMJg3B7yAeXtp
2cVjhmoXiynx7qsWjKl8+hvSmCSMYvsfNygHGbFaLdr/CB8+ug/5fRg2yrhWz68U
emcjljgHRiZpKy8Kn0F0lKTPqKCYi0EVxoDk424c2Ag+oGZsxvhJMolPooOWVXCX
8bfmzyRR2aPi9m8bfp42+yqYYopD/ncr2zF65+6OYtTA2GfxiywG
=wIx1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/testing-pull-request' into staging
Testing patches
One fix for mingw build and some improvements in VM based testing, many thanks
to Paolo and Phil.
# gpg: Signature made Fri 26 Oct 2018 15:15:13 BST
# gpg: using RSA key CA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/testing-pull-request:
tests/vm: Do not abuse parallelism when HOST != TARGET architecture
tests/vm: Do not use -enable-kvm if HOST != TARGET architecture
tests/vm: Let kvm_available() work in cross environments
tests/vm: Add a BaseVM::arch property
tests/vm: Display remaining seconds to wait for a VM to start
tests/vm: Do not use the -smp option with a single cpu
tests/vm: Do not abuse parallelism when KVM is not available
tests/vm: Extract the kvm_available() handy function
tests: docker: update test-mingw for GTK+ 2.0 removal
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix also a grammar issue.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20180713054755.23323-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit 990dc39c made all tests executable at the time, but 218 came in
later, and missing those permissions.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181004161852.11673-4-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit cce293a294 moved some functions from common.config to
common.rc, but the error messages still reference the old file
location.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181004161852.11673-5-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Point to the right and obvious location for lm32 tests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20181004161852.11673-3-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The 'arch' property gives a hint on which architecture the guest image runs.
This can be use to select the correct QEMU binary path.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20181013004034.6968-6-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
--with-gtkabi does not exist anymore; remove it from the configure invocation.
Fixes: 89d85cde75
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1539886203-33670-1-git-send-email-pbonzini@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Using g_spawn_async_with_pipes() is more complicated than running the
sync version. The async version returns a file descriptor for stdout, which may
not be fully read. Sometime "--tpm2" will failed to be read, and will
cause the related test to be silently skipped.
Use g_spawn_sync() instead, simplifying the code and fixing the race.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Validate that the XTS cipher mode will correctly operate with plain
text, cipher text and IV buffers that are not 64-bit aligned.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current XTS test overloads two different tests in a single function
making the code a little hard to follow. Split it into distinct test
cases.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add testing coverage for AES with XTS, ECB and CTR modes
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJb0HIuAAoJENSXKoln91plGcUH/3Lje5KF8kkShQ5dIrH9e8Xz
bvK6lXOLNnndEyrWqJNLaJs7eJKEV2N+E2sBmdIjKnWXVHW6gOW3QBMuVGPTT4rg
C6cntrh2HpnxibgJqrR+3RmjQHAI1Ktixhker9LWimF3ZZhcy4H6mFHwW9z7eBK4
+n/pbnk8fq4FlGHJ2teHhctVIma6slmd8lkMa9vdwVQwpAyzpP82XjrsoTeeYhmG
uuTvX3TFnXKGa9mYGxybpwKd4i+397l9fTQ4egx1KlZMR8OHuQItCBDOFdiQpHOg
yljCeG3jHEhNzVf+xW7JU692Lz097otWDbzWDJibYGJkdkhKfyHJ9PvCYaPiK6M=
=Sg8J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2' into staging
MIPS queue for October 2018 - part 2 - v2
# gpg: Signature made Wed 24 Oct 2018 14:22:54 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2: (33 commits)
target/mips: Fix decoding of ALIGN and DALIGN instructions
target/mips: Fix the title of translate.c
linux-user/mips: Recognize the R5900 CPU model
target/mips: Define the R5900 CPU
tests/tcg/mips: Add tests for R5900 DIVU1
tests/tcg/mips: Add tests for R5900 DIV1
tests/tcg/mips: Add tests for R5900 MTLO1 and MTHI1
tests/tcg/mips: Add tests for R5900 MFLO1 and MFHI1
tests/tcg/mips: Add tests for R5900 three-operand MULTU1
tests/tcg/mips: Add tests for R5900 three-operand MULT1
tests/tcg/mips: Add tests for R5900 three-operand MULTU
tests/tcg/mips: Add tests for R5900 three-operand MULT
target/mips: Make R5900 DMULT[U], DDIV[U], LL[D] and SC[D] user only
target/mips: Support R5900 MOVN, MOVZ and PREF instructions from MIPS IV
target/mips: Support R5900 DIV1 and DIVU1 instructions
target/mips: Support R5900 MFLO1, MTLO1, MFHI1 and MTHI1 instructions
target/mips: Support R5900 three-operand MULT1 and MULTU1 instructions
target/mips: Support R5900 three-operand MULT and MULTU instructions
target/mips: Add a placeholder for R5900 MMI3 instruction subclass
target/mips: Add a placeholder for R5900 MMI2 instruction subclass
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a test for DIVU1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a test for DIV1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a test for MTLO1 and MTHI1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a test for MFLO1 and MFHI1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a test for MULTU1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a test for MULT1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a test for MULTU.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a test for MULT.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
-smp [cpus],sockets/cores/threads[,maxcpus] should describe topology
so that total number of logical CPUs [sockets * cores * threads]
would be equal to [maxcpus], however historically we didn't have
such check in QEMU and it is possible to start VM with an invalid
topology.
Deprecate invalid options combination so we can make sure that
the topology VM started with is always correct in the future.
Users with an invalid sockets/cores/threads/maxcpus values should
fix their CLI to make sure that
[sockets * cores * threads] == [maxcpus]
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1536836762-273036-2-git-send-email-imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[ehabkost: squashed unit test fix]
Message-Id: <20181019215345.521d58d7@igors-macbook-pro.local>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Various shell files contain a mix between obsolete ``
and modern $(); It would be nice to convert to using $()
everywhere.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The migration test for s390x sometimes hangs when running with TCG,
similar to the problems that we have already observed with TCG for
the ppc64 guests. Thus disable the s390x test when we are not running
with KVM for now until the problem with TCG has been resolved.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
-----BEGIN PGP SIGNATURE-----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=kPZX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging
Error reporting patches for 2018-10-22
# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2018-10-22: (40 commits)
error: Drop bogus "use error_setg() instead" admonitions
vpc: Fail open on bad header checksum
block: Clean up bdrv_img_create()'s error reporting
vl: Simplify call of parse_name()
vl: Fix exit status for -drive format=help
blockdev: Convert drive_new() to Error
vl: Assert drive_new() does not fail in default_drive()
fsdev: Clean up error reporting in qemu_fsdev_add()
spice: Clean up error reporting in add_channel()
tpm: Clean up error reporting in tpm_init_tpmdev()
numa: Clean up error reporting in parse_numa()
vnc: Clean up error reporting in vnc_init_func()
ui: Convert vnc_display_init(), init_keyboard_layout() to Error
ui/keymaps: Fix handling of erroneous include files
vl: Clean up error reporting in device_init_func()
vl: Clean up error reporting in parse_fw_cfg()
vl: Clean up error reporting in mon_init_func()
vl: Clean up error reporting in machine_set_property()
vl: Clean up error reporting in chardev_init_func()
qom: Clean up error reporting in user_creatable_add_opts_foreach()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
nettle 2.7.1 was released in 2013 and all the distros that are build
target platforms for QEMU [1] include it:
RHEL-7: 2.7.1
Debian (Stretch): 3.3
Debian (Jessie): 2.7.1
OpenBSD (ports): 3.4
FreeBSD (ports): 3.4
OpenSUSE Leap 15: 3.4
Ubuntu (Xenial): 3.2
macOS (Homebrew): 3.4
Based on this, it is reasonable to require nettle >= 2.7.1 in QEMU
which allows for some conditional version checks in the code to be
removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
bdrv_img_create() takes an Error ** argument and uses it in the
conventional way, except for one place: when qemu_opts_do_parse()
fails, it first reports its error to stderr or the HMP monitor with
error_report_err(), then error_setg()'s a generic error.
When the caller reports that second error similarly, this produces two
consecutive error messages on stderr or the HMP monitor.
When the caller does something else with it, such as send it via QMP,
the first error still goes to stderr or the HMP monitor. Fortunately,
no such caller exists.
Simply use the first error as is. Update expected output of
qemu-iotest 049 accordingly.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-37-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Attributes are simple flags, associated with individual timers for their
whole lifetime. They intended to be used to mark individual timers for
special handling when they fire.
New/init functions family in timer interface updated and refactored (new
'attribute' argument added, timer_list replaced with timer_list_group+type
combinations, comments improved to avoid info duplication). Also existing
aio interface extended with attribute-enabled variants of functions,
which create/initialize timers.
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <f47b81dbce734e9806f9516eba8ca588e6321c2f.1539764043.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
libgcrypt 1.5.0 was released in 2011 and all the distros that are build
target platforms for QEMU [1] include it:
RHEL-7: 1.5.3
Debian (Stretch): 1.7.6
Debian (Jessie): 1.6.3
OpenBSD (ports): 1.8.2
FreeBSD (ports): 1.8.3
OpenSUSE Leap 15: 1.8.2
Ubuntu (Xenial): 1.6.5
macOS (Homebrew): 1.8.3
Based on this, it is reasonable to require libgcrypt >= 1.5.0 in QEMU
which allows for some conditional version checks in the code to be
removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
gnutls 3.0.0 was released in 2011 and all the distros that are build
target platforms for QEMU [1] include it:
RHEL-7: 3.1.18
Debian (Stretch): 3.5.8
Debian (Jessie): 3.3.8
OpenBSD (ports): 3.5.18
FreeBSD (ports): 3.5.18
OpenSUSE Leap 15: 3.6.2
Ubuntu (Xenial): 3.4.10
macOS (Homebrew): 3.5.19
Based on this, it is reasonable to require gnutls >= 3.1.18 in QEMU
which allows for all conditional version checks in the code to be
removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 31d2dda ("build-system: remove per-test GCOV reporting", 2018-06-20)
removed users of the variables, since those uses can be replaced by a simple
overall report produced by gcovr. However, the variables were never removed.
Do it now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[thuth: Fixed up contextual conflicts with the patch from Eric]
Signed-off-by: Thomas Huth <thuth@redhat.com>
GNU make is perfectly happy to use 'check-FOO-y += bar' to
initialize check-FOO-y. (GNU Automake strictly insists that
you cannot use += until after an initial = per variable, but
thankfully we aren't using automake).
As we have had more than one instance where copy-and-paste of
'check-FOO-y = bar' from a first test under category FOO into
an additional test, which ends up disabling the first (see
commits 992159c7 and 4429532b), it's better to just always use
the form that survives copy-and-paste, even for categories that
don't currently add more than one test.
Done with s/^\(check-[a-z]*-y \)=/\1+=/g
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Several changes:
- We only allow generate header "inside" the tree. Why? Because we
need to connit the result, so it makes no sense to generate them on
the build dir.
- We only generate a single target each time. Getting all the
cross-compilers correctly is an impossible task. So know you do:
make -C tests/migration $target (native)
make CROSS_PREFIX=foo- -C tests/migratiion $target (cross)
And you are done.
- If we are building out of tree, we have no data about if we are
cross-compile or whatever. So instead of guess what is happening,
just do what I pointed on previous point.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20180913132313.11370-1-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We can re-use the s390-ccw bios code to implement a small firmware
for a s390x guest which prints out the "A" and "B" characters and
modifies the memory, as required for the migration test.
[quintela: Converted the compile script to Makefile rules]
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1539078677-25396-1-git-send-email-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up Makefile since the aarch patch sneaked in first
This patch adds migration test support for aarch64. The test code, which
implements the same functionality as x86, is booted as a kernel in qemu.
Here are the design choices we make for aarch64:
* We choose this -kernel approach because aarch64 QEMU doesn't provide a
built-in fw like x86 does. So instead of relying on a boot loader, we
use -kernel approach for aarch64.
* The serial output is sent to PL011 directly.
* The physical memory base for mach-virt machine is 0x40000000. We change
the start_address and end_address for aarch64.
In addition to providing the binary, this patch also includes the source
code and the build script in tests/migration/aarch64. So users can change
the source and/or re-compile the binary as they wish.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-Id: <1538669326-28135-1-git-send-email-wei@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Macro g_assert_no_errno() intrudes into GLib's namespace. It's also
pretty pointless. Inline.
At one call site, its redundancy is now obvious. Delete it there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180926122933.3858-1-armbru@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Commit 0bcc8e5bd8 accidentally dropped check-qdict from the list of
unit tests (again, see commit 4429532b48). Put it back, and fix up
the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180926122309.30631-1-armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
By leveraging berkeley's softfloat and testfloat.
With this we get decent coverage of softfloat.c:
$ ./fp-test -r even: 67.22% coverage
$ ./fp-test -r all: 73.11% coverage
Note that we do not yet test parts of softfloat.c that aren't
in the original softfloat library, namely:
- denormal inputs
- *_to_int16/uint16 conversions
- scalbn for fixed point
- muladd variants
- min/max
- exp2
- log2
- float*_compare (except float16_compare)
Signed-off-by: Emilio G. Cota <cota@braap.org>
[rth: Add the new modules to git_submodules.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are BSD-licensed so we can add them as submodules.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This test failed before "fix iterating properties over a class".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
And factor out a common function used by the follow class properties
iterator test.
Fix uninitialized "seentype" variable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 0ea47d0f36.
scripts/argparse.py was removed from the tree, so we don't
need this hack anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180618225131.13113-4-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit c2d3189667.
scripts/argparse.py was removed from the tree, so we don't need
this hack anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180618225131.13113-3-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This test exhibits a regression fixed by the previous reverts.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180817135224.22971-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter reported a test failure on FreeBSD with the new reconnect test:
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))}
gtester -k --verbose -m=quick tests/test-char
TEST: tests/test-char... (pid=16190)
/char/null: OK
/char/invalid: OK
/char/ringbuf: OK
/char/mux: OK
/char/stdio: OK
/char/pipe: OK
/char/file: OK
/char/file-fifo: OK
/char/udp: OK
/char/serial: OK
/char/hotswap: OK
/char/socket/basic: OK
/char/socket/reconnect: FAIL
GTester: last random seed: R02S521380d9c12f1dac3ad1763bf5665c27
(pid=16367)
/char/socket/fdpass: OK
FAIL: tests/test-char
**
ERROR:tests/test-char.c:353:char_socket_test_common: assertion failed:
(object_property_get_bool(OBJECT(chr_client), "connected",
&error_abort))
It turns out that the socket test code checks both server and client
connection states, but doesn't wait for both.
Wait for the client side as well.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180823143125.16767-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Run some memfd-related checks before registering hostmem-memfd &
various properties. This will help libvirt to figure out what the host
is supposed to be capable of.
qemu_memfd_check() is changed to a less optimized version, since it is
used with various flags, it no longer caches the result.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180906161415.8543-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To avoid undefined behaviour.
Note that these "atomics" are atomic in the "access once" sense.
The variables are updated by a single thread at a time, so no
"full" atomics are necessary.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180910232752.31565-6-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_event_reset() must be called before the AIO request in a different
iothread is submitted. Otherwise the request could be completed before
we do the qemu_event_reset() and the test would hang in
qemu_event_wait().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Tested-by: Max Reitz <mreitz@redhat.com>
Recently, the test case has started failing because some job related
functions want to drop the AioContext lock even though it hasn't been
taken:
(gdb) bt
#0 0x00007f51c067c9fb in raise () from /lib64/libc.so.6
#1 0x00007f51c067e77d in abort () from /lib64/libc.so.6
#2 0x0000558c9d5dde7b in error_exit (err=<optimized out>, msg=msg@entry=0x558c9d6fe120 <__func__.18373> "qemu_mutex_unlock_impl") at util/qemu-thread-posix.c:36
#3 0x0000558c9d6b5263 in qemu_mutex_unlock_impl (mutex=mutex@entry=0x558c9f3999a0, file=file@entry=0x558c9d6fd36f "util/async.c", line=line@entry=516) at util/qemu-thread-posix.c:96
#4 0x0000558c9d6b0565 in aio_context_release (ctx=ctx@entry=0x558c9f399940) at util/async.c:516
#5 0x0000558c9d5eb3da in job_completed_txn_abort (job=0x558c9f68e640) at job.c:738
#6 0x0000558c9d5eb227 in job_finish_sync (job=0x558c9f68e640, finish=finish@entry=0x558c9d5eb8d0 <job_cancel_err>, errp=errp@entry=0x0) at job.c:986
#7 0x0000558c9d5eb8ee in job_cancel_sync (job=<optimized out>) at job.c:941
#8 0x0000558c9d64d853 in replication_close (bs=<optimized out>) at block/replication.c:148
#9 0x0000558c9d5e5c9f in bdrv_close (bs=0x558c9f41b020) at block.c:3420
#10 bdrv_delete (bs=0x558c9f41b020) at block.c:3629
#11 bdrv_unref (bs=0x558c9f41b020) at block.c:4685
#12 0x0000558c9d62a3f3 in blk_remove_bs (blk=blk@entry=0x558c9f42a7c0) at block/block-backend.c:783
#13 0x0000558c9d62a667 in blk_delete (blk=0x558c9f42a7c0) at block/block-backend.c:402
#14 blk_unref (blk=0x558c9f42a7c0) at block/block-backend.c:457
#15 0x0000558c9d5dfcea in test_secondary_stop () at tests/test-replication.c:478
#16 0x00007f51c1f13178 in g_test_run_suite_internal () from /lib64/libglib-2.0.so.0
#17 0x00007f51c1f1337b in g_test_run_suite_internal () from /lib64/libglib-2.0.so.0
#18 0x00007f51c1f1337b in g_test_run_suite_internal () from /lib64/libglib-2.0.so.0
#19 0x00007f51c1f13552 in g_test_run_suite () from /lib64/libglib-2.0.so.0
#20 0x00007f51c1f13571 in g_test_run () from /lib64/libglib-2.0.so.0
#21 0x0000558c9d5de31f in main (argc=<optimized out>, argv=<optimized out>) at tests/test-replication.c:581
It is yet unclear whether this should really be considered a bug in the
test case or whether blk_unref() should work for callers that haven't
taken the AioContext lock, but in order to fix the build tests quickly,
just take the AioContext lock around blk_unref().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, the default values for werror and rerror have to be set
explicitly with blk_set_on_error() by the callers of blk_new(). The only
caller actually doing this is blockdev_init(), which is called for
BlockBackends created using -drive.
In particular, anonymous BlockBackends created with
-device ...,drive=<node-name> didn't get the correct default set and
instead defaulted to the integer value 0 (= BLOCKDEV_ON_ERROR_REPORT).
This is the intended default for rerror anyway, but the default for
werror should be BLOCKDEV_ON_ERROR_ENOSPC.
Set the defaults in blk_new() instead so that they apply no matter what
way the BlockBackend was created.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Sufficient L2 cache can noticeably improve the performance when using
large images with frequent I/O.
Previously, unless 'cache-size' was specified and was large enough, the
L2 cache was set to a certain size without taking the virtual image size
into account.
Now, the L2 cache assignment is aware of the virtual size of the image,
and will cover the entire image, unless the cache size needed for that is
larger than a certain maximum. This maximum is set to 1 MB by default
(enough to cover an 8 GB image with the default cluster size) but can
be increased or decreased using the 'l2-cache-size' option. This option
was previously documented as the *maximum* L2 cache size, and this patch
makes it behave as such, instead of as a constant size. Also, the
existing option 'cache-size' can limit the sum of both L2 and refcount
caches, as previously.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image locking errors happening at device initialization time doesn't say
which file cannot be locked, for instance,
-device scsi-disk,drive=drive-1: Failed to get shared "write" lock
Is another process using the image?
could refer to either the overlay image or its backing image.
Hoist the error_append_hint to the caller of raw_check_lock_bytes where
file name is known, and include it in the error hint.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This supercedes Juan's pull from the 13th
-----BEGIN PGP SIGNATURE-----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=JP00
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20180926a' into staging
Migration pull 2018-09-26
This supercedes Juan's pull from the 13th
# gpg: Signature made Wed 26 Sep 2018 18:07:30 BST
# gpg: using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20180926a:
migration/ram.c: Avoid taking address of fields in packed MultiFDInit_t struct
migration: fix the compression code
migration: fix QEMUFile leak
tests/migration: Speed up the test on ppc64
migration: cleanup in error paths in loadvm
migration/postcopy: Clear have_listen_thread
tests/migration: Add migration-test header file
tests/migration: Support cross compilation in generating boot header file
tests/migration: Convert x86 boot block compilation script into Makefile
migration: use save_page_use_compression in flush_compressed_data
migration: show the statistics of compression
migration: do not flush_compressed_data at the end of iteration
Add a hint message to loadvm and exits on failure
migration: handle the error condition properly
migration: fix calculating xbzrle_counters.cache_miss_rate
migration/rdma: Fix uninitialised rdma_return_path
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SLOF boot process is always quite slow ... but we can speed it up
a little bit by specifying "-nodefaults" and by using the "nvramrc"
variable instead of "boot-command" (since "nvramrc" is evaluated earlier
in the SLOF boot process than "boot-command").
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1537204330-16076-1-git-send-email-thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Precomputing the hash values allows us to perform more frequent
accesses to the hash table, thereby reaching higher throughputs.
We keep the old behaviour by default, since (1) we might confuse
users if they measured a speedup without changing anything in
the QHT implementation, and (2) benchmarking the hash function
"on line" is also valuable.
Before:
$ taskset -c 0 tests/qht-bench -n 1
Throughput: 38.18 MT/s
After:
$ taskset -c 0 tests/qht-bench -n 1
Throughput: 38.16 MT/s
After (with precomputing):
$ taskset -c 0 tests/qht-bench -n 1 -p
Throughput: 50.87 MT/s
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Accessing the HT from an iterator results almost always
in a deadlock. Given that only one qht-internal function
uses this argument, drop it from the interface.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform first the tests that exercise code paths that are
easier to hit at small table sizes, and then resize the table
to speed up subsequent tests. If this resize is not too large,
we can make the test faster with no code coverage loss.
- With gcov enabled:
Before: 20.568s, 90.28% qht.c coverage
After: 5.168s, 93.06% qht.c coverage
The coverage increase is entirely due to calling qht_resize,
which we weren't calling before. Note that the code paths
that remain to be tested are either error handling or
can only occur when several threads are accessing the
hash table concurrently (e.g. seqlock retry, trylock fail).
- Without gcov:
Before: 1.987s
After: 0.528s
The speedup is almost the same as with gcov, although the
"before" run is a lot faster.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This improves coverage by one (!) LoC in qht.c, bringing the
coverage rate up from 90.00% to 90.28%.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This improves qht.c code coverage from 89.44% to 90.00%.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch moves the settings related migration-test from the
migration-test.c file to a new header file.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-Id: <1536174934-26022-4-git-send-email-wei@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Recently a new configure option, CROSS_CC_GUEST, was added to
$(TARGET)-softmmu/config-target.mak to support TCG-related tests. This
patch tries to leverage this option to support cross compilation when the
migration boot block file is being re-generated:
* The x86 related files are moved to a new sub-dir (named ./i386).
* A new top-layer Makefile is created in tests/migration/ directory.
This Makefile searches and parses CROSS_CC_GUEST to generate CROSS_PREFIX.
The CROSS_PREFIX, if available, is then passed to migration/$ARCH/Makefile.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-Id: <1536174934-26022-3-git-send-email-wei@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The x86 boot block header currently is generated with a shell script.
To better support other CPUs (e.g. aarch64), we convert the script
into Makefile. This allows us to 1) support cross-compilation easily,
and 2) avoid creating a script file for every architecture.
Note that, in the new design, the cross compiler prefix can be specified by
setting the CROSS_PREFIX in "make" command. Also to allow gcc pre-processor
to include the C-style file correctly, it also renames the
x86-a-b-bootblock.s file extension from .s to .S.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-Id: <1536174934-26022-2-git-send-email-wei@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-cpu max works with any accelerator, so we don't need
to use it only conditionally if not using KVM. Just use
it all the time.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820155554.23476-1-peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
- Deprecate the "enforce-config-section" machine parameter
- Re-enable the wdt_ib700, endianness and vmxnet3 qtests
- Some trivial fixes and doc update patches that crossed my way
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=dXgp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2018-09-25' into staging
- Deprecate the usage of a network backend via "name" instead of "id"
- Deprecate the "enforce-config-section" machine parameter
- Re-enable the wdt_ib700, endianness and vmxnet3 qtests
- Some trivial fixes and doc update patches that crossed my way
# gpg: Signature made Tue 25 Sep 2018 16:58:42 BST
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2018-09-25:
Revert "check: Move VMXNET3 test to common"
Revert "check: Move endianess test to common"
Revert "check: Move wdt_ib700 test to common"
tests/migration: Speed up the test on ppc64
hw/qdev-core: Fix description of instance_init
qdev: fix a typo in comment
docs: Fix some typos (most found by codespell)
trivial: Make bios files and source files non-executable
memfd: fix possible usage of the uninitialized file descriptor
hw/core/machine: Officially deprecate the enforce-config-section parameter
net/slirp: Deprecate the [hub_id name] parameter tuple
net: Deprecate the "name" parameter of -net
Makefile: Add missing dependency for qemu-deprecated.texi
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 7a066770f5.
The patch did not work as expected: The vmxnet3 test is currently
not run at all anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 669cc71000.
The patch did not work as expected: The endianess test is currently
not run at all anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit ee1f6c812b.
The patch did not work as expected: The wdt_ib700 test is currently
not run at all anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
The SLOF boot process is always quite slow ... but we can speed it up
a little bit by specifying "-nodefaults" and by using the "nvramrc"
variable instead of "boot-command" (since "nvramrc" is evaluated earlier
in the SLOF boot process than "boot-command").
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For the block job drain test, don't only test draining the source and
the target node, but create a backing chain for the source
(source_backing <- source <- source_overlay) and test draining each of
the nodes in it.
When using iothreads, the source node (and therefore the job) is in a
different AioContext than the drain, which happens from the main
thread. This way, the main thread waits in AIO_WAIT_WHILE() for the
iothread to make process and aio_wait_kick() is required to notify it.
The test validates that calling bdrv_wakeup() for a child or a parent
node will actually notify AIO_WAIT_WHILE() instead of letting it hang.
Increase the sleep time a bit (to 1 ms) because the test case is racy
and with the shorter sleep, it didn't reproduce the bug it is supposed
to test for me under 'rr record -n'.
This was because bdrv_drain_invoke_entry() (in the main thread) was only
called after the job had already reached the pause point, so we got a
bdrv_dec_in_flight() from the main thread and the additional
aio_wait_kick() when the job becomes idle (that we really wanted to test
here) wasn't even necessary any more to make progress.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Commit 89bd030533 changed the test case from using job_sleep_ns() to
using qemu_co_sleep_ns() instead. Also, block_job_sleep_ns() became
job_sleep_ns() in commit 5d43e86e11.
In both cases, some comments in the test case were not updated. Do that
now.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This adds tests for calling AIO_WAIT_WHILE() in the .commit and .abort
callbacks. Both reasons why .abort could be called for a single job are
tested: Either .run or .prepare could return an error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This is a regression test for a deadlock that could occur in callbacks
called from the aio_poll() in bdrv_drain_poll_top_level(). The
AioContext lock wasn't released and therefore would be taken a second
time in the callback. This would cause a possible AIO_WAIT_WHILE() in
the callback to hang.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
This is a regression test for a deadlock that occurred in block job
completion callbacks (via job_defer_to_main_loop) because the AioContext
lock was taken twice: once in job_finish_sync() and then again in
job_defer_to_main_loop_bh(). This would cause AIO_WAIT_WHILE() to hang.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
All callers in QEMU proper hold the AioContext lock when calling
job_finish_sync(). test-blockjob should do the same when it calls the
function indirectly through job_cancel_sync().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
This extends the existing drain test with a block job to include
variants where the block job runs in a different AioContext.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
We just fixed a bug that was causing a use-after-free when QEMU was
unable to create a temporary snapshot. This is a test case for this
scenario.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds some tests for block-commit with the new options top-node and
base-node (taking node names) instead of top and base (taking file
names).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The exit callback in this test actually only performs cleanup.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180906130225.5118-11-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We remove the exit callback and the completed boolean along with it.
We can simulate it just fine by waiting for the job to defer to the
main loop, and then giving it one final kick to get the main loop
portion to run.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180906130225.5118-10-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
These tests don't actually test blockjobs anymore, they test
generic Job lifetimes. Change the types accordingly.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180906130225.5118-9-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Here are the accumulated ppc target patches for the last several
weeks. Highlights are:
* A number of 40p / PReP cleanups
* Preliminary irq rework on the pseries machine towards the new
XIVE interrupt controller
There are a few patches which make small changes to generic device and
arm code as prerequisites to the 40p interrupt routing cleanup. They
have acks from the relevant maintainers.
-----BEGIN PGP SIGNATURE-----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=A62f
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180925' into staging
ppc patch queue 2018-09-25
Here are the accumulated ppc target patches for the last several
weeks. Highlights are:
* A number of 40p / PReP cleanups
* Preliminary irq rework on the pseries machine towards the new
XIVE interrupt controller
There are a few patches which make small changes to generic device and
arm code as prerequisites to the 40p interrupt routing cleanup. They
have acks from the relevant maintainers.
# gpg: Signature made Tue 25 Sep 2018 08:00:06 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.1-20180925:
40p: add fixed IRQ routing for LSI SCSI device
lsi53c895a: add optional external IRQ via qdev
scsi: remove unused lsi53c895a_create() and lsi53c810_create() functions
scsi: move lsi53c8xx_create() callers to lsi53c8xx_handle_legacy_cmdline()
scsi: add lsi53c8xx_handle_legacy_cmdline() function
sm501: Adjust endianness of pixel value in rectangle fill
spapr_pci: add an extra 'nr_msis' argument to spapr_populate_pci_dt
spapr: increase the size of the IRQ number space
spapr: introduce a spapr_irq class 'nr_msis' attribute
40p: use OR gate to wire up raven PCI interrupts
raven: some minor IRQ-related tidy-ups
hw/ppc: on 40p machine, change default firmware to OpenBIOS
target/ppc/cpu-models: Re-group the 970 CPUs together again
Record history of ppcemb target in common.json
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a small test that will check for the ability to parse
both legacy and modern options for rbd.
The way the test is set up is for failure to occur, but without
having to wait to timeout on a non-existent rbd server. The error
messages in the success path show that the arguments were parsed.
The failure behavior prior to the patch series that has this test, is
qemu-img complaining about mandatory options (e.g. 'pool') not being
provided.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: f830580e339b974a83ed4870d11adcdc17f49a47.1536704901.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
OpenBIOS gained 40p support in 5b20e4cace
Use it, instead of relying on an unmaintained and very limited firmware.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Here's another pull request for qemu-3.1. No real theme here, just an
assortment of various fixes. Probably the most notable thing is the
removal of the ppcemb target which has been deprecated for some time
now.
-----BEGIN PGP SIGNATURE-----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=WnE4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180907' into staging
ppc patch queue 2018-09-07
Here's another pull request for qemu-3.1. No real theme here, just an
assortment of various fixes. Probably the most notable thing is the
removal of the ppcemb target which has been deprecated for some time
now.
# gpg: Signature made Fri 07 Sep 2018 08:30:02 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.1-20180907:
target-ppc: Extend HWCAP2 bits for ISA 3.0
target/ppc/kvm: set vcpu as online/offline
Fix a deadlock case in the CPU hotplug flow
spapr: Correct reference count on spapr-cpu-core
mac_newworld: implement custom FWPathProvider
uninorth: add ofw-addr property to allow correct fw path generation
mac_oldworld: implement custom FWPathProvider
grackle: set device fw_name and address for correct fw path generation
macio: add addr property to macio IDE object
macio: add macio bus to help with fw path generation
macio: move MACIOIDEState type declarations to macio.h
spapr_pci: fix potential NULL pointer dereference
spapr: fix leak of rev array
ppc: Remove deprecated ppcemb target
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the lexer chokes on an input character, it consumes the
character, emits a JSON error token, and enters its start state. This
can lead to suboptimal error recovery. For instance, input
0123 ,
produces the tokens
JSON_ERROR 01
JSON_INTEGER 23
JSON_COMMA ,
Make the lexer skip characters after a lexical error until a
structural character ('[', ']', '{', '}', ':', ','), an ASCII control
character, or '\xFE', or '\xFF'.
Note that we must not skip ASCII control characters, '\xFE', '\xFF',
because those are documented to force the JSON parser into known-good
state, by docs/interop/qmp-spec.txt.
The lexer now produces
JSON_ERROR 01
JSON_COMMA ,
Update qmp-test for the nicer error recovery: QMP now reports just one
error for input %p instead of two. Also drop the newline after %p; it
was needed to tease out the second error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180831075841.13363-5-armbru@redhat.com>
[Conflict with commit ebb4d82d88 resolved]
Markus spotted some issues with this new test case which
unfortunately I didn't notice had been flagged until after
I'd applied the pull request. Revert the relevant commit.
This reverts commit 2b70ea9276.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- split off the individual virtio-ccw devices into separate files
-----BEGIN PGP SIGNATURE-----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=c1n9
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180829' into staging
- various fixes and improvements in the tcg code
- split off the individual virtio-ccw devices into separate files
# gpg: Signature made Wed 29 Aug 2018 10:38:03 BST
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20180829:
target/s390x: use regular spaces in translate.c
hw/s390x: Move virtio-ccw-blk code to a separate file
hw/s390x: Move virtio-ccw-net code to a separate file
hw/s390x: Move virtio-ccw-input code to a separate file
hw/s390x: Move virtio-ccw-gpu code to a separate file
hw/s390x: Move vhost-vsock-ccw code to a separate file
hw/s390x: Move virtio-ccw-crypto code to a separate file
hw/s390x: Move virtio-ccw-9p code to a separate file
hw/s390x: Move virtio-ccw-rng code to a separate file
hw/s390x: Move virtio-ccw-scsi code to a separate file
hw/s390x: Move virtio-ccw-balloon code to a separate file
hw/s390x: Move virtio-ccw-serial code to a separate file
hw/s390x/virtio-ccw: Consolidate calls to virtio_ccw_unrealize()
target/s390x: fix PACK reading 1 byte less and writing 1 byte more
target/s390x: add EX support for TRT and TRTR
target/s390x: fix IPM polluting irrelevant bits
target/s390x: fix CSST decoding and runtime alignment check
target/s390x: add BAL and BALR instructions
tests/tcg: add a simple s390x test
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Don't generate handlers for IRQ levels that are not defined for the CPU
or for window overflow/underflow exceptions for configs w/o windowed
registers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Not all CPU configurations may have enough space for handler code
between exception/interrupt vectors. Leave jumps to the handlers at the
vectors, but move all handlers past the vectors area.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Failed memory transactions should raise exceptions 14 (for fetch) or 15
(for load/store) with XEA2.
Memory accesses that result in TLB miss followed by an attempt to load
PTE from physical memory which fails should raise InstTLBMiss or
LoadStoreTLBMiss with XEA2.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
When a container fails, it leaves a dangling tarball which name is
based on a timestamp. Further uses of make won't clean those files,
neither calling the 'docker-clean' target.
Use the .DELETE_ON_ERROR built-in target to let make remove those
temporary tarballs in case of failure.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180818030337.22271-1-f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
As recommended in https://docs.docker.com/develop/develop-images/dockerfile_best-practices/#sort-multi-line-arguments
"This helps to avoid duplication of packages and make the
list much easier to update. This also makes PRs a lot easier
to read and review."
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180818015344.797-4-f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
As recommended in https://docs.docker.com/develop/develop-images/dockerfile_best-practices/#sort-multi-line-arguments
"This helps to avoid duplication of packages and make the
list much easier to update. This also makes PRs a lot easier
to read and review."
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180818015344.797-3-f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
As recommended in https://docs.docker.com/develop/develop-images/dockerfile_best-practices/#sort-multi-line-arguments
"This helps to avoid duplication of packages and make the
list much easier to update. This also makes PRs a lot easier
to read and review."
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180818015344.797-2-f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
This patch fixes a race condition and test failure where the main process
waits for the signal of a thread but the thread already sent that signal
via a condition. Since these signals are non-sticky, we need to introduce a
separate variable to make this signal sticky.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Utilize the job_exit shim by not calling job_defer_to_main_loop, and
where applicable, converting the deferred callback into the job_exit
callback.
This converts backup, stream, create, and the unit tests all at once.
Most of these jobs do not see any changes to the order in which they
clean up their resources, except the test-blockjob-txn test, which
now puts down its bs before job_completed is called.
This is safe for the same reason the reordering in the mirror job is
safe, because job_completed no longer runs under two locks, making
the unref safe even if it causes a flush.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180830015734.19765-7-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Jobs presently use both an Error object in the case of the create job,
and char strings in the case of generic errors elsewhere.
Unify the two paths as just j->err, and remove the extra argument from
job_completed. The integer error code for job_completed is kept for now,
to be removed shortly in a separate patch.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20180830015734.19765-3-jsnow@redhat.com
[mreitz: Dropped a superfluous g_strdup()]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Presently we codify the entry point for a job as the "start" callback,
but a more apt name would be "run" to clarify the idea that when this
function returns we consider the job to have "finished," except for
any cleanup which occurs in separate callbacks later.
As part of this clarification, change the signature to include an error
object and a return code. The error ptr is not yet used, and the return
code while captured, will be overwritten by actions in the job_completed
function.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180830015734.19765-2-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Verify the usage of this schema feature and the API behaviour. This
should be the only case where qmp_dispatch() returns NULL.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
test_qom_set_without_value() is about a bug in infrastructure used by
the QMP core, fixed in commit c489780203. We covered the bug in
infrastructure unit tests (commit bce3035a44). I wrote that test
earlier, to cover QMP level as well, the test could go into qmp-test.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
test_object_add_without_props() tests a bug in qmp_object_add() we
fixed in commit e64c75a975. Sadly, we don't have systematic
object-add tests. This lone test can go into qmp-cmd-test for want of
a better home.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This helper will simplify a bunch of code checking for QMP errors and
can be shared by various tests. Note that test-qga does check for
error description as well, so don't replace the code there for now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
During development, I got a 'make check' failure that claimed:
qemu-img returned status code 32512
**
ERROR:tests/libqos/libqos.c:202:mkimg: assertion failed: (!rc)
But 32512 is too big for a normal exit status value, which means we
failed to use WEXITSTATUS() to shift the bits to the desired value
for printing. However, instead of worrying about how to portably
parse g_spawn()'s rc in the proper platform-dependent manner, it's
better to just rely on the fact that we now require glib 2.40 (since
commit e7b3af815) and can therefore use glib's portable checker
instead, where the message under my same condition improves to:
Child process exited with code 127
**
ERROR:tests/libqos/libqos.c:192:mkimg: assertion failed: (ret && !err)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The generated qapi_event_send_FOO() take an Error ** argument. They
can't actually fail, because all they do with the argument is passing it
to functions that can't fail: the QObject output visitor, and the
@qmp_emit callback, which is either monitor_qapi_event_queue() or
event_test_emit().
Drop the argument, and pass &error_abort to the QObject output visitor
and @qmp_emit instead.
Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815133747.25032-4-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
PACK fails on the test from the Principles of Operation: F1F2F3F4
becomes 0000234C instead of 0001234C due to an off-by-one error.
Furthermore, it overwrites one extra byte to the left of F1.
If len_dest is 0, then we only want to flip the 1st byte and never loop
over the rest. Therefore, the loop condition should be > and not >=.
If len_src is 1, then we should flip the 1st byte and pack the 2nd.
Since len_src is already decremented before the loop, the first
condition should be >=, and not >.
Likewise for len_src == 2 and the second condition.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-7-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Improves "b213c9f5: target/s390x: Implement TRTR" by introducing the
intermediate functions, which are compatible with dx_helper type.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-6-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Suppose psw.mask=0x0000000080000000, cc=2, r1=0 and we do "ipm 1".
This command must touch only bits 32-39, so the expected output
is r1=0x20000000. However, currently qemu yields r1=0x20008000,
because irrelevant parts of PSW leak into r1 during program mask
transfer.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-5-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
CSST is defined as:
C(0xc802, CSST, SSF, CASS, la1, a2, 0, 0, csst, 0)
It means that the first parameter is handled by in1_la1().
in1_la1() fills addr1 field, and not in1.
Furthermore, when extract32() is used for the alignment check, the
third parameter should specify the number of trailing bits that must
be 0. For FC these numbers are:
FC=0 (word, 4 bytes): 2
FC=1 (double word, 8 bytes): 3
FC=2 (quad word, 16 bytes): 4
For SC these numbers correspond to the size:
SC=0: 0
SC=1: 1
SC=2: 2
SC=3: 3
SC=4: 4
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-4-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There is no known available OS for ppc around anymore that uses page
sizes below 4k, so it does not make much sense that we keep wasting
our time on building and testing the ppcemb-softmmu target. It has
been deprecated since two releases, and nobody complained, so let's
remove this now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It is already protected by CONFIG_ISA_TESTDEV in all architectures.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We protect it with CONFIG_VMXNET3_PCI now, so no need to also put it
on i386.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is only for x86* architecture.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once there, untangle endianness-test and boot-serial-test.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
boot-serial-test don't depend on isa-testdev. Thanks Thomas.
The previous commit makes JSON strings containing '%' awkward to
express in templates: you'd have to mask the '%' with an Unicode
escape \u0025. No template currently contains such JSON strings.
Support the printf conversion specification %% in JSON strings as a
convenience anyway, because it's trivially easy to do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-58-armbru@redhat.com>
The JSON parser optionally supports interpolation. This is used to
build QObjects by parsing string templates. The templates are C
literals, so parse errors (such as invalid interpolation
specifications) are actually programming errors. Consequently, the
functions providing parsing with interpolation
(qobject_from_jsonf_nofail(), qobject_from_vjsonf_nofail(),
qdict_from_jsonf_nofail(), qdict_from_vjsonf_nofail()) pass
&error_abort to the parser.
However, there's another, more dangerous kind of programming error:
since we use va_arg() to get the value to interpolate, behavior is
undefined when the variable argument isn't consistent with the
interpolation specification.
The same problem exists with printf()-like functions, and the solution
is to have the compiler check consistency. This is what
GCC_FMT_ATTR() is about.
To enable this type checking for interpolation as well, we carefully
chose our interpolation specifications to match printf conversion
specifications, and decorate functions parsing templates with
GCC_FMT_ATTR().
Note that this only protects against undefined behavior due to type
errors. It can't protect against use of invalid interpolation
specifications that happen to be valid printf conversion
specifications.
However, there's still a gaping hole in the type checking: GCC
recognizes '%' as start of printf conversion specification anywhere in
the template, but the parser recognizes it only outside JSON strings.
For instance, if someone were to pass a "{ '%s': %d }" template, GCC
would require a char * and an int argument, but the parser would
va_arg() only an int argument, resulting in undefined behavior.
Avoid undefined behavior by catching the programming error at run
time: have the parser recognize and reject '%' in JSON strings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-57-armbru@redhat.com>
test_after_failed_device_add() does this:
response = qmp("{'execute': 'device_add',"
" 'arguments': {"
" 'driver': 'virtio-blk-%s',"
" 'drive': 'drive0'"
"}}", qvirtio_get_dev_type());
Wrong. An interpolation specification must be a JSON token, it
doesn't work within JSON string tokens. The code above doesn't use
the value of qvirtio_get_dev_type(), and sends arguments
{"driver": "virtio-blk-%s", "drive": "drive0"}}
The command fails because there is no driver named "virtio-blk-%".
Harmless, since the test wants the command to fail. Screwed up in
commit 2f84a92ec6.
Fix the obvious way. The command now fails because the drive is
empty, like it did before commit 2f84a92ec6.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-55-armbru@redhat.com>
The JSON parser has three public headers, json-lexer.h, json-parser.h,
json-streamer.h. They all contain stuff that is of no interest
outside qobject/json-*.c.
Collect the public interface in include/qapi/qmp/json-parser.h, and
everything else in qobject/json-parser-int.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-54-armbru@redhat.com>
The last case where qobject_from_json() & friends return null without
setting an error is empty or blank input. Callers:
* block.c's parse_json_protocol() reports "Could not parse the JSON
options". It's marked as a work-around, because it also covered
actual bugs, but they got fixed in the previous few commits.
* qobject_input_visitor_new_str() reports "JSON parse error". Also
marked as work-around. The recent fixes have made this unreachable,
because it currently gets called only for input starting with '{'.
* check-qjson.c's empty_input() and blank_input() demonstrate the
behavior.
* The other callers are not affected since they only pass input with
exactly one JSON value or, in the case of negative tests, one error.
Fail with "Expecting a JSON value" instead of returning null, and
simplify callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-48-armbru@redhat.com>
json_message_process_token() accumulates tokens until it got the
sequence of tokens that comprise a single JSON value (it counts curly
braces and square brackets to decide). It feeds those token sequences
to json_parser_parse(). If a non-empty sequence of tokens remains at
the end of the parse, it's silently ignored. check-qjson.c cases
unterminated_array(), unterminated_array_comma(), unterminated_dict(),
unterminated_dict_comma() demonstrate this bug.
Fix as follows. Introduce a JSON_END_OF_INPUT token. When the
streamer receives it, it feeds the accumulated tokens to
json_parser_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-46-armbru@redhat.com>
qobject_from_json() & friends use the consume_json() callback to
receive either a value or an error from the parser.
When they are fed a string that contains more than either one JSON
value or one JSON syntax error, consume_json() gets called multiple
times.
When the last call receives a value, qobject_from_json() returns that
value. Any other values are leaked.
When any call receives an error, qobject_from_json() sets the first
error received. Any other errors are thrown away.
When values follow errors, qobject_from_json() returns both a value
and sets an error. That's bad. Impact:
* block.c's parse_json_protocol() ignores and leaks the value. It's
used to to parse pseudo-filenames starting with "json:". The
pseudo-filenames can come from the user or from image meta-data such
as a QCOW2 image's backing file name.
* vl.c's parse_display_qapi() ignores and leaks the error. It's used
to parse the argument of command line option -display.
* vl.c's main() case QEMU_OPTION_blockdev ignores the error and leaves
it in @err. main() will then pass a pointer to a non-null Error *
to net_init_clients(), which is forbidden. It can lead to assertion
failure or other misbehavior.
* check-qjson.c's multiple_values() demonstrates the badness.
* The other callers are not affected since they only pass strings with
exactly one JSON value or, in the case of negative tests, one
error.
The impact on the _nofail() functions is relatively harmless. They
abort when any call receives an error. Else they return the last
value, and leak the others, if any.
Fix consume_json() as follows. On the first call, save value and
error as before. On subsequent calls, if any, don't save them. If
the first call saved a value, the next call, if any, replaces the
value by an "Expecting at most one JSON value" error. Take care not
to leak values or errors that aren't saved.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-44-armbru@redhat.com>
Support for %I64d got added in commit 2c0d4b36e7 "json: fix PRId64 on
Win32". We had to hard-code I64d because we used the lexer's finite
state machine to check interpolations. No more, so clean this up.
Additional conversion specifications would be easy enough to implement
when needed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-42-armbru@redhat.com>
Both lexer and parser reject invalid interpolation specifications.
The parser's check is useless.
The lexer ends the token right after the first bad character. This
tends to lead to suboptimal error reporting. For instance, input
[ %04d ]
produces the tokens
JSON_LSQUARE [
JSON_ERROR %0
JSON_INTEGER 4
JSON_KEYWORD d
JSON_RSQUARE ]
The parser then yields an error, an object and two more errors:
error: Invalid JSON syntax
object: 4
error: JSON parse error, invalid keyword
error: JSON parse error, expecting value
Dumb down the lexer to accept [A-Za-z0-9]*. The parser's check is now
used. Emit a proper error there.
The lexer now produces
JSON_LSQUARE [
JSON_INTERP %04d
JSON_RSQUARE ]
and the parser reports just
JSON parse error, invalid interpolation '%04d'
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-41-armbru@redhat.com>
The callback to consume JSON values takes QObject *json, Error *err.
If both are null, the callback is supposed to make up an error by
itself. This sucks.
qjson.c's consume_json() neglects to do so, which makes
qobject_from_json() null instead of failing. I consider that a bug.
The culprit is json_message_process_token(): it passes two null
pointers when it runs into a lexical error or a limit violation. Fix
it to pass a proper Error object then. Update the callbacks:
* monitor.c's handle_qmp_command(): the code to make up an error is
now dead, drop it.
* qga/main.c's process_event(): lumps the "both null" case together
with the "not a JSON object" case. The former is now gone. The
error message "Invalid JSON syntax" is misleading for the latter.
Improve it to "Input must be a JSON object".
* qobject/qjson.c's consume_json(): no update; check-qjson
demonstrates qobject_from_json() now sets an error on lexical
errors, but still doesn't on some other errors.
* tests/libqtest.c's qmp_response(): the Error object is now reliable,
so use it to improve the error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-40-armbru@redhat.com>
The JSON parser optionally supports interpolation. The lexer
recognizes interpolation tokens unconditionally. The parser rejects
them when interpolation is disabled, in parse_interpolation().
However, it neglects to set an error then, which can make
json_parser_parse() fail without setting an error.
Move the check for unwanted interpolation from the parser's
parse_interpolation() into the lexer's finite state machine. When
interpolation is disabled, '%' is now handled like any other
unexpected character.
The next commit will improve how such lexical errors are handled.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-39-armbru@redhat.com>
The classical way to structure parser and lexer is to have the client
call the parser to get an abstract syntax tree, the parser call the
lexer to get the next token, and the lexer call some function to get
input characters.
Another way to structure them would be to have the client feed
characters to the lexer, the lexer feed tokens to the parser, and the
parser feed abstract syntax trees to some callback provided by the
client. This way is more easily integrated into an event loop that
dispatches input characters as they arrive.
Our JSON parser is kind of between the two. The lexer feeds tokens to
a "streamer" instead of a real parser. The streamer accumulates
tokens until it got the sequence of tokens that comprise a single JSON
value (it counts curly braces and square brackets to decide). It
feeds those token sequences to a callback provided by the client. The
callback passes each token sequence to the parser, and gets back an
abstract syntax tree.
I figure it was done that way to make a straightforward recursive
descent parser possible. "Get next token" becomes "pop the first
token off the token sequence". Drawback: we need to store a complete
token sequence. Each token eats 13 + input characters + malloc
overhead bytes.
Observations:
1. This is not the only way to use recursive descent. If we replaced
"get next token" by a coroutine yield, we could do without a
streamer.
2. The lexer reports errors by passing a JSON_ERROR token to the
streamer. This communicates the offending input characters and
their location, but no more.
3. The streamer reports errors by passing a null token sequence to the
callback. The (already poor) lexical error information is thrown
away.
4. Having the callback receive a token sequence duplicates the code to
convert token sequence to abstract syntax tree in every callback.
5. Known bug: the streamer silently drops incomplete token sequences.
This commit rectifies 4. by lifting the call of the parser from the
callbacks into the streamer. Later commits will address 3. and 5.
The lifting removes a bug from qjson.c's parse_json(): it passed a
pointer to a non-null Error * in certain cases, as demonstrated by
check-qjson.c.
json_parser_parse() is now unused. It's a stupid wrapper around
json_parser_parse_err(). Drop it, and rename json_parser_parse_err()
to json_parser_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-35-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-31-armbru@redhat.com>
The JSON parser treats each half of a surrogate pair as unpaired
surrogate. Fix it to recognize surrogate pairs.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-30-armbru@redhat.com>
The JSON parser translates invalid \uXXXX to garbage instead of
rejecting it, and swallows \u0000.
Fix by using mod_utf8_encode() instead of flawed wchar_to_utf8().
Valid surrogate pairs are now differently broken: they're rejected
instead of translated to garbage. The next commit will fix them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-29-armbru@redhat.com>
Since the JSON grammer doesn't accept U+0000 anywhere, this merely
exchanges one kind of parse error for another. It's purely for
consistency with qobject_to_json(), which accepts \xC0\x80 (see commit
e2ec3f9768).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-26-armbru@redhat.com>
We reject bytes that can't occur in valid UTF-8 (\xC0..\xC1,
\xF5..\xFF in the lexer. That's insufficient; there's plenty of
invalid UTF-8 not containing these bytes, as demonstrated by
check-qjson:
* Malformed sequences
- Unexpected continuation bytes
- Missing continuation bytes after start bytes other than
\xC0..\xC1, \xF5..\xFD.
* Overlong sequences with start bytes other than \xC0..\xC1,
\xF5..\xFD.
* Invalid code points
Fixing this in the lexer would be bothersome. Fixing it in the parser
is straightforward, so do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-23-armbru@redhat.com>
The JSON parser rejects some invalid sequences, but accepts others
without correcting the problem.
We should either reject all invalid sequences, or minimize overlong
sequences and replace all other invalid sequences by a suitable
replacement character. A common choice for replacement is U+FFFD.
I'm going to implement the former. Update the comments in
utf8_string() to expect this.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-22-armbru@redhat.com>
Fix the lexer to reject unescaped control characters in JSON strings,
in accordance with RFC 8259 "The JavaScript Object Notation (JSON)
Data Interchange Format".
Bonus: we now recover more nicely from unclosed strings. E.g.
{"one: 1}\n{"two": 2}
now recovers cleanly after the newline, where before the lexer
remained confused until the next unpaired double quote or lexical
error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-19-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-17-armbru@redhat.com>
RFC 8259 "The JavaScript Object Notation (JSON) Data Interchange
Format" requires control characters in strings to be escaped.
Demonstrate the JSON parser accepts U+0001 .. U+001F unescaped.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-16-armbru@redhat.com>
Some of utf8_string()'s test_cases[] contain multiple invalid
sequences. Testing that qobject_from_json() fails only tests we
reject at least one invalid sequence. That's incomplete.
Additionally test each non-space sequence in isolation.
This demonstrates that the JSON parser accepts invalid sequences
starting with \xC2..\xF4. Add a FIXME comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-15-armbru@redhat.com>
The previous commit made utf8_string()'s test_cases[].utf8_in
superfluous: we can use .json_in instead. Except for the case testing
U+0000. \x00 doesn't work in C strings, so it tests \\u0000 instead.
But testing \\uXXXX is escaped_string()'s job. It's covered there.
Test U+0001 here, and drop .utf8_in.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-14-armbru@redhat.com>
utf8_string() tests only double quoted strings. Cover single quoted
strings, too: store the strings to test without quotes, then wrap them
in either kind of quote.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-13-armbru@redhat.com>
simple_string() and single_quote_string() have become redundant with
escaped_string(), except for embedded single and double quotes.
Replace them by a test that covers just that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-12-armbru@redhat.com>
Cover escaped single quote, surrogates, invalid escapes, and
noncharacters. This demonstrates that valid surrogate pairs are
misinterpreted, and invalid surrogates and noncharacters aren't
rejected.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-11-armbru@redhat.com>
Merge a few closely related test strings, and drop a few redundant
ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-10-armbru@redhat.com>
escaped_string() first tests double quoted strings, then repeats a few
tests with single quotes. Repeat all of them: store the strings to
test without quotes, and wrap them in either kind of quote for
testing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-9-armbru@redhat.com>
To permit recovering from arbitrary JSON parse errors, the JSON parser
resets itself on lexical errors. We recommend sending a 0xff byte for
that purpose, and test-qga covers this usage since commit 5229564b83.
That commit had to add an ugly hack to qmp_fd_vsend() to make capable
of sending this byte (it's designed to send only valid JSON).
The previous commit added a way to send arbitrary text. Put that to
use for this purpose, and drop the hack from qmp_fd_vsend().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-8-armbru@redhat.com>
qmp-test neglects to cover QMP input that isn't valid JSON. libqtest
doesn't let us send such input. Add qtest_qmp_send_raw() for this
purpose, and put it to use in qmp-test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-7-armbru@redhat.com>
[Commit message typo fixed]
qmp-test is for QMP protocol tests. Commit e4a426e75e added generic,
basic tests of query commands to it. Move them to their own test
program qmp-cmd-test, to keep qmp-test focused on the protocol.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-6-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-5-armbru@redhat.com>
qobject_from_json() can return null without setting an error on
lexical errors. I call that a bug. Add test coverage to demonstrate
it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-4-armbru@redhat.com>
qobject_from_json() & friends misbehave when the JSON text has more
than one JSON value. Add test coverage to demonstrate the bugs.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-3-armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----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=2bke
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/check/20180822' into staging
check/next for 20180822
# gpg: Signature made Wed 22 Aug 2018 09:03:40 BST
# gpg: using RSA key F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/check/20180822:
check: Only test tpm devices when they are compiled in
check: Only test usb-ehci when it is compiled in
check: Only test usb-uhci devices when they are compiled in
check: Only test usb-ohci when it is compiled in
check: Only test nvme when it is compiled in
check: Only test pvpanic when it is compiled in
check: Only test wdt_ib700 when it is compiled in
check: Only test sdhci when it is compiled in
check: Only test i82801b11 when it is compiled in
check: Only test ioh3420 when it is compiled in
check: Only test ipack when it is compiled in
check: Only test hda when it is compiled in
check: Only test ac97 when it is compiled in
check: Only test es1370 when it is compiled in
check: Only test rtl8139 when it is compiled in
check: Only test pcnet when it is compiled in
check: Only test eepro100 when it is compiled in
check: Only test ne2000 when it is compiled in
check: Only test vmxnet3 when it is compiled in
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VM tests currently have a timeout of 2 minutes for trying
to connect to ssh. Since the guest VM has to boot from cold
to the point of accepting inbound ssh during this time, if the
host machine is heavily loaded it can spuriously time out.
Increase the timeout from 2 to 5 minutes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Fam Zheng <famz@redhat.com>
Message-id: 20180823112153.15279-1-peter.maydell@linaro.org
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlt+5OYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPtxwf8CQM/F+0L+EKeYfYcVgVZsDhhOkLj
Pm61q0bZsWKLby5jCqIDYw7Z/vodJnSS1DO0slIRoXxvQ9DwlkbBnBy/aG/E9U0q
WF1vbCezibDIt7sGcsu9F5zXU9eqe+E6dZfxFrv8FQSOFVxn34TfeJagWLCtzg0d
LnVTF/e4zJD8IQiM7w6lJQxua3fz13ssPEg2KnMkguDhACMwvZ/K/cA2AJkHRMhY
sroPMwLHlrF1NOoeCIrWxYUmSGCRCAy1DmiPGiiSs0yBq/dL0UkAa5Eu6HMQ7rgI
zUff3JDmzEjixUSIEbpVRN+yPCN0/ACSOpJUrKLDxXbc4nZ+PBQ04YpyPQ==
=UZiV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* x86 TCG fixes for 64-bit call gates (Andrew)
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)
# gpg: Signature made Thu 23 Aug 2018 17:46:30 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
KVM: cleanup unnecessary #ifdef KVM_CAP_...
target/i386: update MPX flags when CPL changes
i2c: pm_smbus: Add the ability to force block transfer enable
i2c: pm_smbus: Don't delay host status register busy bit when interrupts are enabled
i2c: pm_smbus: Add interrupt handling
i2c: pm_smbus: Add block transfer capability
i2c: pm_smbus: Make the I2C block read command read-only
i2c: pm_smbus: Fix the semantics of block I2C transfers
i2c: pm_smbus: Clean up some style issues
pc-dimm: assign and verify the "addr" property during pre_plug
pc: drop memory region alignment check for 0
util/oslib-win32: indicate alignment for qemu_anon_ram_alloc()
pc-dimm: assign and verify the "slot" property during pre_plug
ipmi: Use proper struct reference for BT vmstate
vhost-scsi: expose 't10_pi' property for VIRTIO_SCSI_F_T10_PI
vhost-scsi: unify vhost-scsi get_features implementations
vhost-user-scsi: move host_features into VHostSCSICommon
cpus: allow cpu_get_ticks out of BQL
cpus: protect TimerState writes with a spinlock
seqlock: add QemuLockable support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
So that we can test other implementations.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-8-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of declaring it volatile.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-6-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The check should be unnecessary since commit
e7b3af8159 "glib: bump min required glib
library version to 2.40".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180730153639.26466-1-marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When used together with -m, this allows us to benchmark the
profiler's performance impact on qemu_mutex_lock.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Certain device introspection crashes used to only happen if you were
using a certain machine, e.g. if the machine was using serial_hd() or
nd_table[], and a device was trying to use these in its instance_init
function, too.
To be able to catch these problems, let's extend the device-introspect
test to check the devices on all machine types, with and without the
"-nodefaults" parameter (since this makes a difference sometimes, too).
Since this is a rather slow operation, and most of the problems are
already handled by testing with the "none" machine only, the test with
all machines is only run in the "make check SPEED=slow" mode.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1534419358-10932-8-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introspection should not change the qom-tree / qtree, so we should check
this in the device-introspect-test, too. This patch helped to find lots
of instrospection bugs during the QEMU v3.0 soft/hard-freeze period in the
last two months.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1534419358-10932-7-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The tests that check something for all machine types currently spend
a lot of time checking old machine types (like "pc-i440fx-2.0" for
example). The chances that we find something new there in addition
to checking the latest version of a machine type are pretty low, so
we should not waste the time of the developers by testing this again
and again in the "quick" testing mode.
Thus let's add some code to determine whether we are testing a current
machine type or an old one, and only test the old types if we are
running in "SPEED=slow" mode.
This decreases the testing time quite a bit now, e.g. the qom-test
now finishes within 4 seconds for qemu-system-x86_64 instead of 30
seconds when testing all machines.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1534419358-10932-6-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running "make check" on a non-POWER host, the output is quite
distorted like this:
[...]
GTESTER check-qtest-nios2
GTESTER check-qtest-or1k
GTESTER check-qtest-ppc64
Skipping test: kvm_hv not available Skipping test: kvm_hv not available Skipping test: kvm_hv not available Skipping test: kvm_hv not available GTESTER check-qtest-ppcemb
GTESTER check-qtest-ppc
GTESTER check-qtest-riscv32
GTESTER check-qtest-riscv64
[...]
Move the check to the beginning of the main function instead, so that
we do not have to test the condition again and again for each test,
and better use g_test_message() instead of g_print() here, like it is
also done in ufd_version_check() already.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1534419358-10932-2-git-send-email-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because qtest does not support s390 channel I/O, s390 only performs smoke tests on
those few devices that do not have any functional tests. Therefore, every time we
add functional tests for a virtio device, the choice is between removing
those tests from the s390 suite (so that s390 actually _loses_ coverage)
or sprinkling the test with architecture checks.
This patch simply creates a ccw-specific test that only performs smoke tests on
all virtio-ccw devices. If channel I/O support is ever added to qtest and libqos,
then this file can go away. In the meanwhile, it simplifies maintenance and
makes sure that all virtio devices are tested.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ehci test also test uhci. Welcome to the worderfull world of USB.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
It was not possible to compile out pvpanic. Use the same trick
than applesmc.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
