A conflict was resolved the wrong way when merging commit 320ba5f (build:
always link device_tree.o into emulators if libfdt available, 2013-02-05).
This causes a build failure for the arm-softmmu target due to multiply
defined symbol.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1362997886-9470-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* origin/master: (75 commits)
tcg: Don't make exitreq flag a local temporary
Makefile: Add subdir dependency on config-devices-all.mak
make_device_config.sh: Emit dependency file to directory where included
Revert "make_device_config.sh: Fix target path in generated dependency file"
s390/virtio-ccw: remove redundant call to blockdev_mark_auto_del
s390/css: Fix subchannel detection
Allow virtio-net features for legacy s390 virtio bus
s390: virtio-ccw maintainer
s390: simplify kvm cpu init
pseries: Add compatible property to root of device tree
target-ppc: Move CPU aliases out of translate_init.c
target-ppc: Report CPU aliases for QMP
target-ppc: List alias names alongside CPU models
target-ppc: Make host CPU a subclass of the host's CPU model
PPC: xnu kernel expects FLUSH to be cleared on STOP
PPC: Fix dma interrupt
target-ppc: Fix PPC_DUMP_SPR_ACCESS build
target-ppc: Synchronize FPU state with KVM
target-ppc: Add mechanism for synchronizing SPRs with KVM
Save memory allocation in the elf loader
...
* bonzini/hw-dirs:
sh: move files referencing CPU to hw/sh4/
ppc: move more files to hw/ppc
ppc: move files referencing CPU to hw/ppc/
m68k: move files referencing CPU to hw/m68k/
i386: move files referencing CPU to hw/i386/
arm: move files referencing CPU to hw/arm/
hw: move boards and other isolated files to hw/ARCH
ppc: express FDT dependency of pSeries and e500 boards via default-configs/
build: always link device_tree.o into emulators if libfdt available
hw: include hw header files with full paths
ppc: do not use ../ in include files
vt82c686: vt82c686 is not a PCI host bridge
virtio-9p: remove PCI dependencies from hw/9pfs/
virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX
hw: move device-hotplug.o to toplevel, compile it once
hw: move qdev-monitor.o to toplevel directory
hw: move fifo.[ch] to libqemuutil
hw: move char backends to backends/
Conflicts:
backends/baum.c
backends/msmouse.c
hw/a15mpcore.c
hw/arm/Makefile.objs
hw/arm/pic_cpu.c
hw/dataplane/event-poll.c
hw/dataplane/virtio-blk.c
include/char/baum.h
include/char/msmouse.h
qemu-char.c
vl.c
Resolve conflicts caused by header movements.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Lei Li (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
Fix the wrong description in qemu manual
pci_host: Drop write-only address_space field
rng-random: Use qemu_open / qemu_close
configure: Require at least spice-protocol-0.12.3
osdep: replace setsockopt by qemu_setsockopt
lm32: remove unused function
rtc-test: Fix test failures with recent glib
configure: Create link to icon bitmap for out-of-tree builds
# By Paolo Bonzini (4) and Peter Lieven (2)
# Via Paolo Bonzini
* bonzini/scsi-next:
scsi-disk: handle io_canceled uniformly and correctly
scsi-disk: do not complete canceled UNMAP requests
scsi: do not call scsi_read_data/scsi_write_data for a canceled request
iscsi: look for pkg-config file too
iscsi: add iscsi_truncate support
iscsi: retry read, write, flush and unmap on unit attention check conditions
The value is not actually live across basic blocks, so there's no
need for the local property. This eliminates storing the temporary
to its home location at the branch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
What 23bf49b5ec really seemed to try to
fix is that Makefile could recurse into *-softmmu/ subdirectories before
a new *-softmmu/config-devices.mak was generated from pci.mak.
Fix this by adding a dependency on config-all-devices.mak, which in turn
has dependencies on *-softmmu/config-devices.mak.
Reported-by: Gerhard Wiesinger <lists@wiesinger.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Placing the config-devices.mak.d file alongside the config-devices.mak
file in *-softmmu/ lead to it getting included into through
*-softmmu/Makefile in addition to ./Makefile, leading to confusion.
Instead, emit it to ./%-config-devices.mak.d, where it is included.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This reverts commit 23bf49b5ec.
While *-softmmu/config-devices.mak.d is included through *.d pattern via
Makefile.target, the make_devices_config.sh call these dependencies are
for is in ./Makefile. Therefore revert to original behavior.
This should unbreak pci.mak dependencies not propagating.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 's390-for-upstream' of git://github.com/agraf/qemu:
s390/virtio-ccw: remove redundant call to blockdev_mark_auto_del
s390/css: Fix subchannel detection
Allow virtio-net features for legacy s390 virtio bus
s390: virtio-ccw maintainer
s390: simplify kvm cpu init
* 'ppc-for-upstream' of git://github.com/agraf/qemu: (66 commits)
pseries: Add compatible property to root of device tree
target-ppc: Move CPU aliases out of translate_init.c
target-ppc: Report CPU aliases for QMP
target-ppc: List alias names alongside CPU models
target-ppc: Make host CPU a subclass of the host's CPU model
PPC: xnu kernel expects FLUSH to be cleared on STOP
PPC: Fix dma interrupt
target-ppc: Fix PPC_DUMP_SPR_ACCESS build
target-ppc: Synchronize FPU state with KVM
target-ppc: Add mechanism for synchronizing SPRs with KVM
Save memory allocation in the elf loader
pseries: Implement h_read hcall
target-ppc: Change "POWER7" CPU alias
target-ppc: Fix remaining microcontroller typos among models
target-ppc: Split model definitions out of translate_init.c
target-ppc: Update Coding Style for CPU models
target-ppc: Turn descriptive CPU model comments into device descriptions
target-ppc: Turn descriptive CPU family comments into device descriptions
target-ppc: Set remaining fields on CPU family classes
target-ppc: Register all types for TARGET_PPCEMB
...
blockdev_mark_auto_del is already called in virtio-blk-exit.
Remove the redundant call.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We have to consider the m bit to find the real channel subsystem when
determining the last subchannel.
If we fail to take this into account, removal of a subchannel in
the middle of a big list of devices will stop device detection after
a reboot.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Enable all virtio-net features for the legacy s390 virtio bus. This also fixes
kernel BUG at /usr/src/packages/BUILD/kernel-default-3.0.58/linux-3.0/drivers/s390/kvm/kvm_virtio.c:121!
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
Add myself as maintainer for virtio-ccw and the s390-ccw-virtio machine.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
[agraf: add myself for virtio-ccw machine]
Signed-off-by: Alexander Graf <agraf@suse.de>
There is no special code right now and the reset ioctl is done later
on in the the reset handler anyway. Lets simplify the cpu init.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, for the pseries machine the device tree supplied by qemu to SLOF
and from there to the guest does not include a 'compatible property' at the
root level. Usually that works fine, since in this case the compatible
property doesn't really give any information not already found in the
'device_type' or 'model' properties.
However, the lack of 'compatible' confuses the bootloader install in the
SLES11 SP2 and SLES11 SP3 installers. This patch therefore adds a token
'compatible' property to work around that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
Move array of CPU aliases to cpu-models.c, alongside model definitions.
This requires to zero-terminate the aliases array since ARRAY_SIZE() can
no longer be used in translate_init.c then.
Suggested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The QMP query-cpu-definitions implementation iterated over CPU classes
only, which were getting less and less as aliases were extracted.
Keep them in QMP as valid -cpu arguments even if not guaranteed stable.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Revert adding a separate -cpu ? output section for aliases and list them
per CPU subclass.
Requested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This avoids assigning individual class fields and contributors
forgetting to add field assignments in KVM-only code.
ppc_cpu_class_find_by_pvr() requires the CPU model classes to be
registered, so defer host CPU type registration to kvm_arch_init().
Only register the host CPU type if there is a class with matching PVR.
This lets us drop error handling from instance_init.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
In openbios (drivers/ide.c) they are set to
0000000d 00000000 00000002 00000000
0000000e 00000000 00000003 00000000
0000000f 00000000 00000004 00000000
(The last one seems to be not implemented in qemu)
It follows convention of how they are set on real machines,
both ide and dma ones are increased
Real machine one:
http://web.archive.org/web/20090107151044/http://penguinppc.org/historical/dev-trees-html/g4_agp_500_2.html
00000013 00000001 0000000b 00000000
00000014 00000001 0000000c 00000000
00000015 00000001 0000000d 00000000
Signed-off-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
A victim of the d523dd00a7 AREG0
conversion, insert the missing cpu_env arguments.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently qemu does not get and put the state of the floating point and
vector registers to KVM. This is obviously a problem for savevm, as well
as possibly being problematic for debugging of FP-using guests.
This patch fixes this by using new extensions to the ONE_REG interface to
synchronize the qemu floating point state with KVM.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently when runing under KVM on ppc, we synchronize a certain number of
vital SPRs to KVM through the SET_SREGS call. This leaves out quite a lot
of important SPRs which are maintained in KVM. It would be helpful to
have their contents in qemu for debugging purposes, and when we implement
migration it will be vital, since they include important guest state that
will need to be restored on the target.
This patch sets up for synchronization of any registers supported by the
KVM ONE_REG calls. A new variant on spr_register() allows a ONE_REG id to
be stored with the SPR information. When we set/get information to KVM
we also synchronize any SPRs so registered.
For now we set this mechanism up to synchronize a handful of important
registers that already have ONE_REG IDs, notably the DAR and DSISR.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The current elf loader uses too much memory. For example, I have a
executable with a bss section of 400 MB and I set the ram size to 512
MB. Qemu uses about 780MB of RAM (which is fine), but there's a peak at
1.6 GB during initialization (this is not fine).
This patch fixes two things:
1) do not allocate each elf program twice.
2) do not allocate memory for areas that are only zeros.
For this we need a new field in Rom: "datasize" which is the size of the
allocated data. If datasize is less than romsize, it means that the area
from datasize to romsize is filled with zeros.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This h_call is useful for DLPAR in future amongst other things. Given an index
it fetches the corresponding PTE stored in the htab.
Signed-off-by: Erlon Cruz <erlon.cruz@br.flextronics.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Let it resolve to v2.3 rather than v2.0.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that model definitions only reference their parent type, model
definitions are independent of the family definitions and can be
compiled independently of TCG translation.
Keep all #if defined(TODO) code local to cpu-models.c.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This gets rid of some more overly long comments that have lost most of
their purpose now that in most cases there's only two functions left per
CPU family.
The class field is inherited by the actual CPU models, so override it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now POWERPC_DEF_SVR() no longer sets family-specific fields itself.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Don't attempt to suppress registration of CPU types, since the criteria
is actually a property of the class and should thus become a field.
Since we can't check a field set in a class_init function before
registering the type that leads to execution of that function, guard the
-cpu class lookup instead and suppress exposing these classes in -cpu ?
and in QMP.
In case someone tries to hot-add an incompatible CPU via device_add,
error out in realize.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Instead of assigning *_<family> constants, set .parent to a family type.
Introduce a POWERPC_FAMILY() macro to keep type registration close to
its implementation. This macro will need tweaking later.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Turn the array of model definitions into a set of self-registering QOM
types with their own class_init. Unique identifiers are obtained from
the combination of PVR, SVR and family identifiers; this requires all
alias #defines to be removed from the list. Possibly there are some more
left after this commit that are not currently being compiled.
Prepares for introducing abstract intermediate CPU types for families.
Keep the right-aligned macro line breaks within 78 chars to aid
three-way merges.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
We are about to drop the redundant name field along with ppc_def_t.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
