1. We'll reuse op_vcdg() for similar instructions later, prepare for
that.
2. We'll reuse vop64_2() later for other instructions.
We have to mangle the erm (effective rounding mode) and the m4 into
the simd_data(), and properly unmangle them again.
Make sure to restore the erm before triggering an exception.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Provide for all three instructions all four combinations of cc bit and
s bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
As far as I can see, there is only a tiny difference.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
1. We'll reuse op_vfa() for similar instructions later, prepare for
that.
2. We'll reuse vop64_3() for other instructions later.
3. Take care of modifying the vector register only if no trap happened.
- on traps, flags are not updated and no elements are modified
- traps don't modify the fpc flags
- without traps, all exceptions of all elements are merged
4. We'll reuse check_ieee_exc() later when we need the XxC flag.
We have to check for exceptions after processing each element.
Provide separate handlers for single/all element processing. We'll do
the same for all applicable FP instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Vector floating-point instructions will require these functions, so
allow to use them from other files.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Handling is similar to data exceptions, however we can always store the
VXC into the lowore and the FPC:
z14 PoP, 6-20, "Vector-Exception Code"
When a vector-processing exception causes a pro-
gram interruption, a vector-exception code (VXC) is
stored at location 147, and zeros are stored at loca-
tions 144-146. The VXC is also placed in the DXC
field of the floating-point-control (FPC) register if bit
45 of control register 0 is one. When bit 45 of control
register 0 is zero and bit 46 of control register 0 is
one, the DXC field of the FPC register and the con-
tents of storage at location 147 are unpredictable.
Signed-off-by: David Hildenbrand <david@redhat.com>
The PoP (z14, 7-382) says:
Doublewords to the right of the doubleword in which the
highest-numbered facility bit is assigned for a model
may or may not be stored.
However, stack protection in certain binaries can't deal with that.
"gzip" example code:
f1b4: a7 08 00 03 lhi %r0,3
f1b8: b2 b0 f0 a0 stfle 160(%r15)
f1bc: e3 20 f0 b2 00 90 llgc %r2,178(%r15)
f1c2: c0 2b 00 00 00 01 nilf %r2,1
f1c8: b2 4f 00 10 ear %r1,%a0
f1cc: b9 14 00 22 lgfr %r2,%r2
f1d0: eb 11 00 20 00 0d sllg %r1,%r1,32
f1d6: b2 4f 00 11 ear %r1,%a1
f1da: d5 07 f0 b8 10 28 clc 184(8,%r15),40(%r1)
f1e0: a7 74 00 06 jne f1ec <file_read@@Base+0x1bc>
f1e4: eb ef f1 30 00 04 lmg %r14,%r15,304(%r15)
f1ea: 07 fe br %r14
f1ec: c0 e5 ff ff 9d 6e brasl %r14,2cc8 <__stack_chk_fail@plt>
In QEMU, we currently have:
max_bytes = 24
the code asks for (3 + 1) doublewords == 32 bytes.
If we write 32 bytes instead of only 24, and return "2 + 1" doublewords
("one less than the number of doulewords needed to contain all of the
facility bits"), the example code detects a stack corruption.
In my opinion, the code is wrong. However, it seems to work fine on
real machines. So let's limit storing to the minimum of the requested
and the maximum doublewords.
Cc: Stefan Liebler <stli@linux.ibm.com>
Cc: Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
used_stfl_bytes is 0, before initialized via prepare_stfl() on the
first invocation. We have to move the calculation of max_bytes after
prepare_stfl().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
CPU_DoubleU is primarily used to reinterpret between integer and floats.
We don't really need this functionality. So let's just keep it simple
and use an uint64_t.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
11e2bfef79 ("tcg/i386: Use MOVDQA for TCG_TYPE_V128 load/store")
revealed that the vregs are not aligned to 16 bytes. Align them to
16 bytes, to avoid segfault'ing on x86.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Unfortunately, there is no easy way to avoid looping over all elements
in v2. Provide specialized variants for !cc,!rt/!cc,rt/cc,!rt/cc,rt and
all element types. Especially for different values of rt, the compiler
might be able to optimize the code a lot.
Add s390_vec_write_element().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Similar to VECTOR FIND ELEMENT EQUAL. Core logic courtesy of Richard H.
Add s390_vec_read_element() that can deal with element sizes.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Complicated stuff. Provide two different helpers for CC an !CC handling.
We might want to add more helpers later.
zero_search() and match_index() are courtesy of Richard H.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJc+jVzAAoJENSXKoln91plGK8H/0KFwVp0wDPGCYpl03slnLaw
sGlMWyfNt8ZOWrDkIIkT+WxJyidVOPkTK5n7cPIN+fT13i396Nq/1EQL/nVQEVXp
X/J+nfgkJoNcNlgUXtmDAYR3xMyjZohVYHVUwEo3KrsdVaQDXX0xOcNvNoJwppWf
/T/e/3QJebd+hoasLZvsD2RMxc7f1AS1ZLuXOGvKBJI38fP3b6IAOaP8CDBiYYwM
Ov1Mi66NnTrsMNH29skCvYDfGKtp2haBeTxmb8qENguv1DZVgmVoTKZN1pQ6J0Jx
7SNagHVCoKNw6MrOAH1vufYsiNEfofpr6BHxeBOa9z0VA3wLIFtVuhzY5FtfoEY=
=ZIqF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jun-7-2019' into staging
MIPS Queue for June 7th, 2019
# gpg: Signature made Fri 07 Jun 2019 10:59:15 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-jun-7-2019:
tests/tcg: target/mips: Add README for MSA tests
tests/tcg: target/mips: Add tests for MSA FP max/min instructions
tests/tcg: target/mips: Add utility function reset_msa_registers()
tests/tcg: target/mips: Move four tests to a better location
tests/tcg: target/mips: Add tests for MSA shift instructions
tests/tcg: target/mips: Amend and rearrange MSA wrappers
target/mips: Unroll loops in helpers for MSA logic instructions
target/mips: Outline places for future MSA helpers
target/mips: Fix block-comment-related issues in msa_helper.c
target/mips: Fix space-related format issues in msa_helper.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add README for MSA tests. This is just to explain how to run tests even
without Makefile. Makefile will be provided later on.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-11-git-send-email-aleksandar.markovic@rt-rk.com>
Add function reset_msa_registers() and utilize it in each MSA test.
This is needed to ensure independency of test results on the state of
MSA registers before test execution. This also allows for correction
of tests for VSHF* instructions, that are now independent on the
previous state of MSA registers.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-9-git-send-email-aleksandar.markovic@rt-rk.com>
Move tests for <MUL|MULR>_Q.<H|B> from "integer multiply" directory
to "fixed-point multiply" directory, since they do not operate on
integers, but on fixed point numbers.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-8-git-send-email-aleksandar.markovic@rt-rk.com>
Amend and rearrange MSA wrappers to follow the same organization as
in MSA tests.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-6-git-send-email-aleksandar.markovic@rt-rk.com>
Unroll loops in helpers for MSA logic instructions for better
performance.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-5-git-send-email-aleksandar.markovic@rt-rk.com>
Outline places for future MSA helpers to follow the same organization
as in MSA tests.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-4-git-send-email-aleksandar.markovic@rt-rk.com>
Fix block-comment-related issues reported by checkpatch for file
msa_helper.c.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-3-git-send-email-aleksandar.markovic@rt-rk.com>
Fix space-related format issues reported by checkpatch in file
msa_helper.c.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-2-git-send-email-aleksandar.markovic@rt-rk.com>
stricter rules for acpi tables: we now fail
on any difference that isn't whitelisted.
vhost-scsi migration.
some cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJc+B4YAAoJECgfDbjSjVRpq1EIAJR7tCxcpu9GggVlinmUA8G4
tmSAe06IryH7+nF3RsnINuGu7ius9qC2/E2y0uJUHhTqiU/RWOfWZ7PPM0EcYZaA
TLPaCe2NUF6/8afeqmvE9Usk7VspI5TDZRms+bonmZz2xP1lHIMN0qW4s7HHLWr8
sZKDtCJ+9cYII93VQwtlR0qiHgv5f0kzcuZeJaZHsAHH6XZGqRuQjI6txcFa4o53
lkdLCEwTnRuwu2wyL84eL5p+E8SzOgR/x1QI+nffrJfsvnmiT7lnOrkjnQlWAp5G
xqwqsUrUxUCuQ+zitwJqmv+H6nx79MwAM7fTHAETCWX703N5o9tZxAnHHqLoa8I=
=cQNg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci, pc: cleanups, features
stricter rules for acpi tables: we now fail
on any difference that isn't whitelisted.
vhost-scsi migration.
some cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 05 Jun 2019 20:55:04 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
bios-tables-test: ignore identical binaries
tests: acpi: add simple arm/virt testcase
tests: add expected ACPI tables for arm/virt board
bios-tables-test: list all tables that differ
vhost-scsi: Allow user to enable migration
vhost-scsi: Add VMState descriptor
vhost-scsi: The vhost backend should be stopped when the VM is not running
bios-tables-test: add diff allowed list
vhost: fix memory leak in vhost_user_scsi_realize
vhost: fix incorrect print type
vhost: remove the dead code
docs: smbios: remove family=x from type2 entry description
pci: Fold pci_get_bus_devfn() into its sole caller
pci: Make is_bridge a bool
pcie: Simplify pci_adjust_config_limit()
acpi: pci: use build_append_foo() API to construct MCFG
hw/acpi: Consolidate build_mcfg to pci.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than looking inside the definition of a DeviceState with
"s->qdev", use the QOM prefered style: "DEVICE(s)".
This patch was generated using the following Coccinelle script:
// Use DEVICE() macros to access DeviceState.qdev
@use_device_macro_to_access_qdev@
expression obj;
identifier dev;
@@
-&obj->dev.qdev
+DEVICE(obj)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190528164020.32250-11-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rather than looking inside the definition of a BusState with "s->bus.qbus",
use the QOM prefered style: "BUS(&s->bus)".
This patch was generated using the following Coccinelle script:
// Use BUS() macros to access BusState.qbus
@use_bus_macro_to_access_qbus@
expression obj;
identifier bus;
@@
-&obj->bus.qbus
+BUS(&obj->bus)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190528164020.32250-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rather than looking inside the definition of a BusState with "s->bus.qbus",
use the QOM prefered style: "BUS(&s->bus)".
This patch was generated using the following Coccinelle script:
// Use BUS() macros to access BusState.qbus
@use_bus_macro_to_access_qbus@
expression obj;
identifier bus;
@@
-&obj->bus.qbus
+BUS(&obj->bus)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190528164020.32250-6-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rather than looking inside the definition of a DeviceState with
"s->qdev", use the QOM prefered style: "DEVICE(s)".
This patch was generated using the following Coccinelle script
(with a bit of manual fix-up, removing an extra space to please
checkpatch.pl):
// Use DEVICE() macros to access DeviceState.qdev
@use_device_macro_to_access_qdev@
expression obj;
identifier dev;
@@
-&obj->dev.qdev
+DEVICE(obj)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>.
Message-Id: <20190528164020.32250-7-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rather than looking inside the definition of a DeviceState with
"s->qdev", use the QOM prefered style: "DEVICE(s)".
This patch was generated using the following Coccinelle script:
// Use DEVICE() macros to access DeviceState.qdev
@use_device_macro_to_access_qdev@
expression obj;
identifier dev;
@@
-&obj->dev.qdev
+DEVICE(obj)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <20190528164020.32250-10-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rather than looking inside the definition of a DeviceState with
"s->qdev", use the QOM prefered style: "DEVICE(s)".
This patch was generated using the following Coccinelle script:
// Use DEVICE() macros to access DeviceState.qdev
@use_device_macro_to_access_qdev@
expression obj;
identifier dev;
@@
-&obj->dev.qdev
+DEVICE(obj)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20190528164020.32250-9-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rather than looking inside the definition of a DeviceState with
"s->qdev", use the QOM prefered style: "DEVICE(s)".
This patch was generated using the following Coccinelle script:
// Use DEVICE() macros to access DeviceState.qdev
@use_device_macro_to_access_qdev@
expression obj;
identifier dev;
@@
-&obj->dev.qdev
+DEVICE(obj)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20190528164020.32250-8-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rather than looking inside the definition of a BusState with "s->bus.qbus",
use the QOM prefered style: "BUS(&s->bus)".
This patch was generated using the following Coccinelle script:
// Use BUS() macros to access BusState.qbus
@use_bus_macro_to_access_qbus@
expression obj;
identifier bus;
@@
-&obj->bus.qbus
+BUS(&obj->bus)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190528164020.32250-5-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rather than looking inside the definition of a BusState with "s->bus.qbus",
use the QOM prefered style: "BUS(&s->bus)".
This patch was generated using the following Coccinelle script:
// Use BUS() macros to access BusState.qbus
@use_bus_macro_to_access_qbus@
expression obj;
identifier bus;
@@
-&obj->bus.qbus
+BUS(&obj->bus)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20190528164020.32250-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since the BusState is accesible from the SCSIBus object,
it is pointless to use qbus_reset_all_fn.
Use qbus_reset_all() directly.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Message-Id: <20190528164020.32250-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The default-configs/ example added in 717171bd20 is no
more accurate since fa212a2b8b (and various further other
commits).
The Kconfig build system is now in place.
Use the aarch64-softmmu config as example.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190529140504.21580-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix a fat-fingered invocation of tap-merge.pl in the recipe of target
check-report.tap.
Fixes: 9df43317b8 "test: replace gtester with a TAP driver"
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190604080010.23186-1-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Explicitly ignore the return value of qemu_guest_getrandom.
Because we use error_fatal, all errors are already caught.
Fixes: CID 1401701
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190530173824.30699-1-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
fix incorrect print type in vhost_virtqueue_stop
Signed-off-by: Jie Wang <wangjie88@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1556605773-42019-1-git-send-email-wangjie88@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
'postocpy' should be 'postcopy'.
CC: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190525062832.18009-1-liq3ea@163.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is a trivial cleanup patch.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Kamal Heib <kheib@redhat.com>
Message-Id: <20190505105112.22691-1-yuval.shaia@oracle.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
when binary of the tables is identical, there is no need to run iasl
to check that they are functionally equivalent.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Objects should not be "delayed" without a reason, as the previous
commit demonstrates. The remaining ones have reasons. State them.
and demand future ones come with such a statement.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604151251.9903-3-armbru@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-system-FOO's main() acts on command line arguments in its own
idiosyncratic order. There's not much method to its madness.
Whenever we find a case where one kind of command line argument needs
to refer to something created for another kind later, we rejigger the
order.
Recent commit cda4aa9a5a "vl: Create block backends before setting
machine properties" was such a rejigger. Block backends are now
created before "delayed" objects. This broke persistent reservation
management. Reproducer:
$ qemu-system-x86_64 -object pr-manager-helper,id=pr-helper0,path=/tmp/pr-helper0.sock-drive -drive file=/dev/mapper/crypt,file.pr-manager=pr-helper0,format=raw,if=none,id=drive-scsi0-0-0-2
qemu-system-x86_64: -drive file=/dev/mapper/crypt,file.pr-manager=pr-helper0,format=raw,if=none,id=drive-scsi0-0-0-2: No persistent reservation manager with id 'pr-helper0'
The delayed pr-manager-helper object is created too late for use by
-drive or -blockdev. Normal objects are still created in time.
pr-manager-helper has always been a delayed object (commit 7c9e527659
"scsi, file-posix: add support for persistent reservation
management"). Turns out there's no real reason for that. Make it a
normal object.
Fixes: cda4aa9a5a
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604151251.9903-2-armbru@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
During migration, we would sync bitmap from ram_list.dirty_memory to
RAMBlock.bmap in cpu_physical_memory_sync_dirty_bitmap().
Since we set RAMBlock.bmap and ram_list.dirty_memory both to all 1, this
means at the first round this sync is meaningless and is a duplicated
work.
Leaving RAMBlock->bmap blank on allocating would have a side effect on
migration_dirty_pages, since it is calculated from the result of
cpu_physical_memory_sync_dirty_bitmap(). To keep it right, we need to
set migration_dirty_pages to 0 in ram_state_init().
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
