Commit Graph

15038 Commits

Author SHA1 Message Date
Jan Kiszka
ba9bc59e1f kvm: x86: Pass KVMState to kvm_arch_get_supported_cpuid
kvm_arch_get_supported_cpuid checks for global cpuid restrictions, it
does not require any CPUState reference. Changing its interface allows
to call it before any VCPU is initialized.

CC: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-20 15:24:00 -03:00
Jan Kiszka
4bef75b533 kvm: Clean up stubs
No one references kvm_check_extension, kvm_has_vcpu_events, and
kvm_has_robust_singlestep outside KVM code.

kvm_update_guest_debug is never called, thus has no job besides
returning an error.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-20 15:21:09 -03:00
Jan Kiszka
3d0388f76f kvm: ppc: Drop KVM_CAP build dependencies
No longer needed with accompanied kernel headers.

CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-20 15:20:50 -03:00
Jan Kiszka
e56ff191b6 kvm: x86: Drop KVM_CAP build dependencies
No longer needed with accompanied kernel headers.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-20 15:19:54 -03:00
Jan Kiszka
ba4047cf84 kvm: Drop KVM_CAP build dependencies
No longer needed with accompanied kernel headers. We are only left with
build dependencies that are controlled by kvm arch headers.

CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-20 15:18:43 -03:00
Jan Kiszka
1480b74f9a kvm: Drop useless zero-initializations
Backing KVMState is alreay zero-initialized.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-20 15:17:55 -03:00
Jan Kiszka
0bed3bba7d kvm: ppc: Drop CONFIG_KVM_PPC_PVR
Required header support is now unconditionally available.

CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-20 15:17:33 -03:00
Jan Kiszka
5802e066eb kvm: Drop CONFIG_KVM_PARA
The kvm_para.h header is now always available.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-20 15:16:45 -03:00
Jan Kiszka
e205c7902f Switch build system to accompanied kernel headers
This helps reducing our build-time checks for feature support in the
available Linux kernel headers. And it helps users that do not have
sufficiently recent headers installed on their build machine.

Consequently, the patch removes and build-time checks for kvm and vhost
in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
supposed to be provided by QEMU only.

s390 needs some extra love as it carries redefinitions from kernel
headers.

CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-20 15:16:12 -03:00
Jan Kiszka
51b24e34d4 Import kernel headers
These kernel headers and the COPYING file were automatically imported
from current Linux git, cb0a02ecf9 (post 3.0-rc2).

Licensing:
asm-powerpc	GPLv2
asm-s390	GPLv2
asm-x86		Linux top-level license (GPLv2 with exception)
linux/kvm*:	Linux top-level license (GPLv2 with exception)
linux/vhost:	Linux top-level license (GPLv2 with exception)
linux/virtio*:	3-clause BSB

CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-20 15:13:34 -03:00
Jan Kiszka
87fdd47668 Add kernel header update script
This helper pulls the required kernel headers for KVM and vhost into a
specified directory. The update is triggered via

    scripts/update-linux-headers.sh LINUX_PATH

and will place the output under linux-headers/linux and linux-headers/asm-*.
It also imports the COPYING to care for headers without an explicit license.

CC: Alexander Graf <agraf@suse.de>
CC: Christoph Hellwig <hch@lst.de>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-20 15:12:22 -03:00
Jan Kiszka
42cc8fa620 kvm: x86: Save/restore FPU OP, IP and DP
These FPU states are properly maintained by KVM but not yet by TCG. So
far we unconditionally set them to 0 in the guest which may cause
state corruptions, though not with modern guests.

To avoid breaking backward migration, use a conditional subsection that
is only written if any of the three fields is non-zero. The guest's
FNINIT clears them frequently, and cleared IA32_MISC_ENABLE MSR[2]
reduces the probability of non-zero values further so that this
subsection is not expected to restrict migration in any common scenario.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-06-19 15:57:56 +03:00
Peter Maydell
eb47d7c5d9 hw/9118.c: Implement active-low interrupt support
The 9118 ethernet controller interrupt line is active low unless
the IRQ config register is programmed to set both the IRQ_POL
(polarity: active-high) and IRQ_TYPE (type: push-pull) bits:
implement support for inverting the irq output in other configurations.
This also requires that we support setting the bits in the first
place, and that we correctly preserve them across software reset.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-06-15 13:23:37 +02:00
Andreas Färber
953ffe0f93 Introduce format string for pid_t
BeOS and Haiku on i386 use long for 32-bit types, including pid_t.
Using %d with pid_t therefore results in a warning.

Unfortunately POSIX:2008 does not define a PRId* string for pid_t.

In some places pid_t was previously casted to long and %ld hardcoded.
The predecessor of this patch added another upcast for the simpletrace
filename but was not applied to date.

Since new uses of pid_t with %d keep creeping in, let's instead define
an OS-dependent format string and use that consistently.

Cc: Stefan Hajnoczi <stefanha@gmail.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Ingo Weinhold <ingo_weinhold@gmx.de>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-15 19:58:48 +00:00
Juha Riihimäki
1e36f6a5b5 smc91c111: qdevify reset
Register the smc91c111 reset function as a qdev reset function.

Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-15 19:46:46 +00:00
Blue Swirl
22e1e72960 Merge branch 'cocoa-for-upstream' of git://repo.or.cz/qemu/afaerber
* 'cocoa-for-upstream' of git://repo.or.cz/qemu/afaerber:
  Darwin: Fix compilation warning regarding the deprecated daemon() function
  cocoa: Avoid warning related to multiple handleEvent: definitions
  cocoa: Revert dependency on VNC
  cocoa: Provide central qemu_main() prototype
  Fix libfdt warnings on Darwin
  configure: Fix check for fdatasync()
  Remove warning in printf due to type mismatch
  Cocoa: avoid displaying window when command-line contains '-h' or '-help'
  Fix compilation warning due to incorrectly specified type
  cocoa: do not create a spurious window for -version
2011-06-15 18:31:56 +00:00
Matthew Fernandez
c235d7387c Command line support for altering the log file location
Add command line support for logging to a location other than /tmp/qemu.log.

With logging enabled (command line option -d), the log is written to
the hard-coded path /tmp/qemu.log. This patch adds support for writing
the log to a different location by passing the -D option.

Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-15 16:51:24 +00:00
Anthony Liguori
71f34ad053 Merge remote-tracking branch 'alon/pull-libcacard-1' into staging 2011-06-15 09:03:49 -05:00
Anthony Liguori
b45a9b1851 Merge remote-tracking branch 'qemu-kvm/uq/master' into staging 2011-06-15 09:03:33 -05:00
Anthony Liguori
f897235e0a Merge remote-tracking branch 'kraxel/usb.16' into staging 2011-06-15 09:03:22 -05:00
Anthony Liguori
1f8bedba79 Merge remote-tracking branch 'kwolf/for-anthony' into staging 2011-06-15 09:02:18 -05:00
Kevin Wolf
7887f6201f Allow nested qemu_bh_poll() after BH deletion
Without this, qemu segfaults when a BH handler first deletes its BH and
then calls another function which involves a nested qemu_bh_poll() call.

This can be reproduced by generating an I/O error (e.g. with blkdebug) on
an IDE device and using rerror/werror=stop to stop the VM. When continuing
the VM, qemu segfaults.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-15 15:43:20 +02:00
Kevin Wolf
ee752da74f ide: Clear error_status after restarting flush
Clearing the error status flag was missing for restarting flushes. Now that the
error status is separate from the BM status register, we can simply set it to 0
after restarting the request. This ensures that we never forget to clear a bit.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15 15:39:13 +02:00
Christoph Hellwig
d353fb72f5 ide: add TRIM support
Add support for TRIM sub function of the data set management command,
and wire it up to the qemu discard infrastructure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15 14:36:16 +02:00
Christoph Hellwig
4e1e00515e ide: allow other dma comands than read and write
Replace the is_read flag with a dma_cmd flag to allow the dma and
restart logic to handler other commands like TRIM.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15 14:36:16 +02:00
Christoph Hellwig
cb144ccb2f make dma_bdrv_io available to drivers
Make dma_bdrv_io available for drivers, and pass an explicit I/O function
instead of hardcoding bdrv_aio_readv/bdrv_aio_writev.  This is required
to implement non-READ/WRITE dma commands in the ide driver, e.g. the
upcoming TRIM support.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15 14:36:16 +02:00
Kevin Wolf
0754f9ecef ide: Add forgotten VMSTATE_END_OF_LIST in subsection
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15 14:36:16 +02:00
Kevin Wolf
fdc650d76d ide: Fix ide_drive_pio_state_needed()
When a failed PIO request caused the VM to stop, we still need to transfer the
PIO state even though DRQ=0 at this point.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15 14:36:15 +02:00
Kevin Wolf
def93791f2 ide: Split error status from status register
When adding the werror=stop mode, some flags were added to s->status
which are used to determine what kind of operation should be restarted
when the VM is continued.

Unfortunately, it turns out that s->status is in fact a device register
and as such is visible to the guest (some of the abused bits are even
writable for the guest).

For migration we keep on using the old VMState field (renamed to
migration_compat_status) if the status register doesn't use any of the
previously abused bits. If it does, we use a subsection with a clean copy of
the status register.

The error status is always sent in a subsection if there is any error. It can't
use the old field because errors happen even without PCI.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15 14:36:15 +02:00
Kevin Wolf
9e2a3701a1 qcow2: Fix in-flight list after qcow2_cache_put failure
If qcow2_cache_put returns an error during cluster allocation and the
allocation fails, it must be removed from the list of in-flight allocations.
Otherwise we'd get a loop in the list when the ACB is used for the next
allocation.

Luckily, this qcow2_cache_put shouldn't fail anyway because the L2 table is
only read, so that qcow2_cache_put doesn't even involve I/O.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-06-15 14:36:15 +02:00
Devin Nakamura
39aa9a12cc Replaced tabs with spaces in block.h and block_int.h
Signed-off-by: Devin Nakamura <devin122@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15 14:36:15 +02:00
Kevin Wolf
e67a64a869 vdi: Avoid direct AIO callback
bdrv_aio_* must not call the callback before returning to its caller. In vdi,
this could happen in some error cases. This starts the real requests processing
in a BH to avoid this situation.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15 14:35:15 +02:00
Kevin Wolf
b11a24dee6 qcow: Avoid direct AIO callback
bdrv_aio_* must not call the callback before returning to its caller. In qcow,
this could happen in some error cases. This starts the real requests processing
in a BH to avoid this situation.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-14 17:03:27 +02:00
Kevin Wolf
42496d6240 qcow2: Avoid direct AIO callback
bdrv_aio_* must not call the callback before returning to its caller. In qcow2,
this could happen in some error cases. This starts the real requests processing
in a BH to avoid this situation.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-14 17:03:25 +02:00
Yang, Wei Y
f79116867e kvm: Enable CPU SMEP feature
This patchset enables a new CPU feature SMEP (Supervisor Mode Execution
Protection) in QEMU-KVM. SMEP prevents kernel from executing code in application.
Updated Intel SDM describes this CPU feature. The document will be published soon.

SMEP is identified by CPUID leaf 7 EBX[7], which is 0 before. Get the right value by query KVM kernel module, so that guest can get SMEP through CPUID.

 Signed-off-by: Yang, Wei <wei.y.yang@intel.com>
 Singed-off-by: Shan, Haitao <haitao.shan@intel.com>
 Singed-off-by: Li, Xin <xin.li@intel.com>

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-14 09:34:35 -05:00
brillywu@viatech.com.cn
b3baa152aa kvm: Add CPUID support for VIA CPU
When KVM is running on VIA CPU with host cpu's model, the
feautures of VIA CPU will be passed into kvm guest by calling
the CPUID instruction for Centaur.

Signed-off-by: BrillyWu<brillywu@viatech.com.cn>
Signed-off-by: KaryJin<karyjin@viatech.com.cn>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-14 09:34:35 -05:00
Markus Armbruster
6df658f55c usb-ccid: Plug memory leak on qdev exit()
ccid_initfn() allocates CCIDBus dynamically, but there is no exit
callback to free it.

Fix by getting rid of the allocation.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2011-06-14 09:34:35 -05:00
Alon Levy
44dc0ca3d2 libcacard: add libcacard.la target
No flag to configure is required. Instead, added a libcacard.la target that
is not built by default, only when requested explicitly via:

mkdir build
cd build
../configure
make libcacard.la
make install-libcacard

Uses libtool to do actual linking of object files and shared library, and
installing. Tested only under linux, but supposed to work on other systems as
well.

If libtool isn't found you get a message complaining about that, only at build
time (since it is not a default target I did not add a message at configure
time).

New build artifacts:
 .libs subdirectories (at <buildroot> and <buildroot>/libcacard)
 *.lo files (at same locations as the respective o files)

Added %.lo : %.c rule that uses libtool.
Updated clean rule to clean up those artifacts.
Added specific rule to call dtrace with libtool wrapper (note that because of
a current upstream dtrace bug fixed by systemtap b1568fd85 commit the -fPIC flag
isn't actually passed on. still current dtrace+libtool produced object links fine).
If libtool is missing any of the following targets will complain and exit 1:
 any subdir: *.lo
 root and libcacard: libcacard.la, libcacard-instsall

Tested to link and load with all tracing backends.
2011-06-14 09:34:34 -05:00
Alon Levy
3aa5d2bee8 configure: add libdir and --libdir 2011-06-14 09:34:34 -05:00
Gerd Hoffmann
94cc916a8c usb-uhci: fix expire time initialization.
expire_time must be initialited when the guest activates the
usb scheduler, not at device creation time.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:50 +02:00
Peter Maydell
9bba1eb180 hw/usb-ohci.c: Implement remote wakeup
Implement the wakeup callback in the OHCI USBPortOps, so that when
a downstream device wakes up it correctly causes the OHCI controller
to come out of suspend.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:50 +02:00
Peter Maydell
4b0315d7ed hw/usb-ohci.c: Ignore writes to HcPeriodCurrentED register
HcPeriodCurrentED is read-only, but Linux writes to it anyway; silently
ignore this rather than printing a warning message.

(Specifically, drivers/usb/host/ohci-hub.c:ohci_rh_resume() writes a
0, in at least kernels 2.6.25 through 2.6.39.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:50 +02:00
Brad Hards
4001f22ffd usb: Use defines for serial bus release number register for EHCI
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:50 +02:00
Brad Hards
e59d33a734 usb: Use defines for serial bus release number register for UHCI
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:50 +02:00
Brad Hards
8e257816b0 usb: Add defines for USB Serial Bus Release Number register
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:50 +02:00
Hans de Goede
290a5c60a3 usb-bus: Don't detach non attached devices on device exit
This causes an "Error: tried to detach unattached usb device " to be printed,
this can happen when deleting ie a usb host qdev, which did not
get attached (because a device matching the filter never got plugged in).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Hans de Goede
290d26d2e7 usb-bus: Add knowledge of USB_SPEED_SUPER to usb_speed helper
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Hans de Goede
f8ddbfbcda usb-linux: Enlarge buffer for descriptors to 8192 bytes
1024 bytes is way to small, one hd UVC webcam I have over here has so
many resolutions its descriptors take op close to 4k. Hopefully 8k will
be enough for all devices.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Gerd Hoffmann
e447fc6353 usb: don't call usb_host_device_open from vl.c
Not needed any more, usb-host is qdev-ified these days.
Well, at least the linux version ...

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Gerd Hoffmann
1f45a81bef usb-linux: only cleanup in host_close when host_open was successful. 2011-06-14 12:56:49 +02:00