In the -bios case the "isa-bios" memory region is an alias to the BIOS mapped
to the top of the 4G memory boundary. Do the same in the -pflash case, but only
for new machine versions for migration compatibility. This establishes common
behavior and makes pflash commands work in the "isa-bios" region which some
real-world legacy bioses rely on.
Note that in the sev_enabled() case, the "isa-bios" memory region in the -pflash
case will now also point to encrypted memory, just like it already does in the
-bios case.
When running `info mtree` before and after this commit with
`qemu-system-x86_64 -S -drive \
if=pflash,format=raw,readonly=on,file=/usr/share/qemu/bios-256k.bin` and running
`diff -u before.mtree after.mtree` results in the following changes in the
memory tree:
--- before.mtree
+++ after.mtree
@@ -71,7 +71,7 @@
0000000000000000-ffffffffffffffff (prio -1, i/o): pci
00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
- 00000000000e0000-00000000000fffff (prio 1, rom): isa-bios
+ 00000000000e0000-00000000000fffff (prio 1, romd): alias isa-bios @system.flash0 0000000000020000-000000000003ffff
00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff
00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff
00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff
@@ -108,7 +108,7 @@
0000000000000000-ffffffffffffffff (prio -1, i/o): pci
00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
- 00000000000e0000-00000000000fffff (prio 1, rom): isa-bios
+ 00000000000e0000-00000000000fffff (prio 1, romd): alias isa-bios @system.flash0 0000000000020000-000000000003ffff
00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff
00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff
00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff
@@ -131,11 +131,14 @@
memory-region: pc.ram
0000000000000000-0000000007ffffff (prio 0, ram): pc.ram
+memory-region: system.flash0
+ 00000000fffc0000-00000000ffffffff (prio 0, romd): system.flash0
+
memory-region: pci
0000000000000000-ffffffffffffffff (prio -1, i/o): pci
00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
- 00000000000e0000-00000000000fffff (prio 1, rom): isa-bios
+ 00000000000e0000-00000000000fffff (prio 1, romd): alias isa-bios @system.flash0 0000000000020000-000000000003ffff
memory-region: smram
00000000000a0000-00000000000bffff (prio 0, ram): alias smram-low @pc.ram 00000000000a0000-00000000000bffff
Note that in both cases the "system" memory region contains the entry
00000000fffc0000-00000000ffffffff (prio 0, romd): system.flash0
but the "system.flash0" memory region only appears standalone when "isa-bios" is
an alias.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20240508175507.22270-7-shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This effectively reverts
commit 54c4ea8f3a
Author: Zhao Liu <zhao1.liu@intel.com>
Date: Sat Mar 9 00:01:37 2024 +0800
hw/core/machine-smp: Deprecate unsupported "parameter=1" SMP configurations
but is not done as a 'git revert' since the part of the changes to the
file hw/core/machine-smp.c which add 'has_XXX' checks remain desirable.
Furthermore, we have to tweak the subsequently added unit test to
account for differing warning message.
The rationale for the original deprecation was:
"Currently, it was allowed for users to specify the unsupported
topology parameter as "1". For example, x86 PC machine doesn't
support drawer/book/cluster topology levels, but user could specify
"-smp drawers=1,books=1,clusters=1".
This is meaningless and confusing, so that the support for this kind
of configurations is marked deprecated since 9.0."
There are varying POVs on the topic of 'unsupported' topology levels.
It is common to say that on a system without hyperthreading, that there
is always 1 thread. Likewise when new CPUs introduced a concept of
multiple "dies', it was reasonable to say that all historical CPUs
before that implicitly had 1 'die'. Likewise for the more recently
introduced 'modules' and 'clusters' parameter'. From this POV, it is
valid to set 'parameter=1' on the -smp command line for any machine,
only a value > 1 is strictly an error condition.
It doesn't cause any functional difficulty for QEMU, because internally
the QEMU code is itself assuming that all "unsupported" parameters
implicitly have a value of '1'.
At the libvirt level, we've allowed applications to set 'parameter=1'
when configuring a guest, and pass that through to QEMU.
Deprecating this creates extra difficulty for because there's no info
exposed from QEMU about which machine types "support" which parameters.
Thus, libvirt can't know whether it is valid to pass 'parameter=1' for
a given machine type, or whether it will trigger deprecation messages.
Since there's no apparent functional benefit to deleting this deprecated
behaviour from QEMU, and it creates problems for consumers of QEMU,
remove this deprecation.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Message-ID: <20240513123358.612355-2-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Move the pflash_blk_write_start() call. We need the offset of the
first data write, not the offset for the setup (number-of-bytes)
write. Without this fix u-boot can do block writes to the first
flash block only.
While being at it drop a leftover FIXME.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2343
Fixes: 284a7ee2e2 ("hw/pflash: implement update buffer for block writes")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240516121237.534875-1-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
adapter_info_so_needed() treats its "opaque" parameter as a S390FLICState,
but the function belongs to a VMStateDescription that is attached to a
TYPE_VIRTIO_CCW_BUS device. This is currently causing a crash when the
user tries to save or migrate the VM state. Fix it by using s390_get_flic()
to get the correct device here instead.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes: 9d1b0f5bf5 ("s390_flic: add migration-enabled property")
Message-ID: <20240517061553.564529-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This commit introduces utility functions for the creation and deallocation
of QemuDmaBuf instances. Additionally, it updates all relevant sections
of the codebase to utilize these new utility functions.
v7: remove prefix, "dpy_gl_" from all helpers
qemu_dmabuf_free() returns without doing anything if input is null
(Daniel P. Berrangé <berrange@redhat.com>)
call G_DEFINE_AUTOPTR_CLEANUP_FUNC for qemu_dmabuf_free()
(Daniel P. Berrangé <berrange@redhat.com>)
v8: Introduction of helpers was removed as those were already added
by the previous commit
v9: set dmabuf->allow_fences to 'true' when dmabuf is created in
virtio_gpu_create_dmabuf()/virtio-gpu-udmabuf.c
removed unnecessary spaces were accidently added in the patch,
'ui/console: Use qemu_dmabuf_new() a...'
v11: Calling qemu_dmabuf_close was removed as closing dmabuf->fd will be
done in qemu_dmabuf_free anyway.
(Daniel P. Berrangé <berrange@redhat.com>)
v12: --- Calling qemu_dmabuf_close separately as qemu_dmabuf_free doesn't
do it.
--- 'dmabuf' is now allocated space so it should be freed at the end of
dbus_scanout_texture
v13: --- Immediately free dmabuf after it is released to prevent possible
leaking of the ptr
(Marc-André Lureau <marcandre.lureau@redhat.com>)
--- Use g_autoptr macro to define *dmabuf for auto clean up instead of
calling qemu_dmabuf_free
(Marc-André Lureau <marcandre.lureau@redhat.com>)
v14: --- (vhost-user-gpu) Change qemu_dmabuf_free back to g_clear_pointer
as it was done because of some misunderstanding (v13).
--- (vhost-user-gpu) g->dmabuf[m->scanout_id] needs to be set to NULL
to prevent freed dmabuf to be accessed again in case if(fd==-1)break;
happens (before new dmabuf is allocated). Otherwise, it would cause
invalid memory access when the same function is executed. Also NULL
check should be done before qemu_dmabuf_close (it asserts dmabuf!=NULL.).
(Marc-André Lureau <marcandre.lureau@redhat.com>)
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-6-dongwon.kim@intel.com>
This commit updates all instances where fields within the QemuDmaBuf
struct are directly accessed, replacing them with calls to these new
helper functions.
v6: fix typos in helper names in ui/spice-display.c
v7: removed prefix, "dpy_gl_" from all helpers
v8: Introduction of helpers was removed as those were already added
by the previous commit
v11: -- Use new qemu_dmabuf_close() instead of close(qemu_dmabuf_get_fd()).
(Daniel P. Berrangé <berrange@redhat.com>)
-- Use new qemu_dmabuf_dup_fd() instead of dup(qemu_dmabuf_get_fd()).
(Daniel P. Berrangé <berrange@redhat.com>)
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-4-dongwon.kim@intel.com>
All other boards require libfdt if it can be used (including for example
i386/x86_64), so change the "imply" to "select" and always allow -dtb
in qemu-system-xtensa.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that boards are enabled by default and the "CONFIG_FOO=y"
entries are gone from configs/devices/, there cannot be any more
a conflicts between the default contents of configs/devices/
and a failed "depends on" clause.
With this change, each individual board or target can express
whether it needs FDT. It can then include the common code in the
build via "select DEVICE_TREE", which will also as tell meson to link
with libfdt.
This allows building non-microvm x86 emulators without having
libfdt available.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a new Kconfig symbol, CONFIG_DEVICE_TREE, that specifies whether
to include the common device tree code in system/device_tree.c and to
link to libfdt. For now, include it unconditionally if libfdt is
available.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid having to list dependencies such as libfdt twice, both on common_ss
and specific_ss. Instead, just take all the dependencies in common_ss
and allow the target-specific libqemu-*.fa library to use them.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The local APIC is a part of the CPU and has callbacks that are invoked
from multiple accelerators.
The IOAPIC on the other hand is optional, but ioapic_eoi_broadcast is
used by common x86 code to implement the IOAPIC's implicit EOI mode.
Add a stub in case the IOAPIC device is not included but the APIC is.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240509170044.190795-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The rtc-reset-reinjection QMP command is specific to x86, other boards do not
have the ACK tracking functionality that is needed for RTC interrupt
reinjection. Therefore the QMP command is only included in x86, but
qmp_rtc_reset_reinjection() is implemented by hw/rtc/mc146818rtc.c
and requires tracking of all created RTC devices. Move the implementation
to hw/i386, so that 1) it is available even if no RTC device exist
2) the only RTC that exists is easily found in x86ms->rtc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240509170044.190795-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Keep the basic X86MachineState definition in x86.c. Move out functions that
are only needed by other files: x86-common.c for the pc and microvm machines,
x86-cpu.c for those used by accelerator code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240509170044.190795-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no need to override these fields of MachineClass because they are
already set to the right value in the superclass.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240509170044.190795-10-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
fw_cfg.c and vapic.c are currently included unconditionally but
depend on other components. vapic.c depends on the local APIC,
while fw_cfg.c includes a piece of AML builder code that depends
on CONFIG_ACPI.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240509170044.190795-9-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is okay to register legacy backends in the middle of xen_bus_init().
All that the registration does is record the existence of the backend
in xenstore.
This makes it possible to remove them from the build without introducing
undefined symbols in xen_be_init(). It also removes the need for the
backend_register callback, whose only purpose is to avoid registering
nonfunctional backends.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240509170044.190795-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare for moving the calls to xen_be_register() under the
control of xen_bus_init(), using the normal xen_backend_init()
method that is used by the "modern" backends.
This requires the xenstore global variable to be initialized,
which is done by xen_be_init(). To ensure that everything is
ready at the time the xen_backend_init() functions are called,
remove the xen_be_init() function from all the boards and
place it directly in xen_bus_init().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240509170044.190795-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CSS subsystem uses global variables, just face the truth and use
a variable also for whether the CSS vmstate is in use; remove the
indirection of fetching it from the machine type, which makes the
TCG code depend unnecessarily on the virtio-ccw machine.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240509170044.190795-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of mucking with css_migration_enabled(), add a property specific to
the FLIC device, similar to what is done for TYPE_S390_STATTRIB.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240509170044.190795-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This function has no dependency on the virtio-ccw machine type, though it
assumes that the CPU address corresponds to the core_id and the index.
If there is any need of something different or more fancy (unlikely)
S390 can include a MachineClass subclass and implement it there. For
now, move it to sigp.c for simplicity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240509170044.190795-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
get_sclp_device() scans the whole machine to find a TYPE_SCLP object.
Now that the SCLPDevice instance is available under the machine state,
use it to simplify the lookup. While at it, remove the inline to let
the compiler decide on how to optimize.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240502131533.377719-4-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
sclp_get_event_facility_bus() scans the whole machine to find a
TYPE_SCLP_EVENTS_BUS object. The SCLPDevice instance is now available
under the machine state, use it to simplify the lookup and adjust the
creation of the consoles.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240502131533.377719-3-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Initialize directly SCLPDevice from the machine init handler and
remove s390_sclp_init(). We will use the SCLPDevice pointer later to
create the consoles.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240502131533.377719-2-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The sclpconsole currently does not have a proper parent in the QOM
tree, so it shows up under /machine/unattached - which is somewhat
ugly. We should rather attach it to /machine/sclp/s390-sclp-event-facility
where the other devices of type TYPE_SCLP_EVENT already reside.
Message-ID: <20240430190843.453903-1-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZjyDAgAKCRBAov/yOSY+
33cfA/4jE0x+eLAT161caSwM3wBOfZRClfUhXdkxLP6GvWbACVQ8l0rEZiw2PuI8
DFReU2gqs7wAfYKt7Yy62xXlCw1B3aSUzE45gS2TGIP1GqKBwigvpW4i1SgiOoMX
4TA+GG16KgR9zaxO48bjjyJ1epc7S3SxdAL09p2U08D9EdSwCA==
=RLFu
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240509' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240509
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZjyDAgAKCRBAov/yOSY+
# 33cfA/4jE0x+eLAT161caSwM3wBOfZRClfUhXdkxLP6GvWbACVQ8l0rEZiw2PuI8
# DFReU2gqs7wAfYKt7Yy62xXlCw1B3aSUzE45gS2TGIP1GqKBwigvpW4i1SgiOoMX
# 4TA+GG16KgR9zaxO48bjjyJ1epc7S3SxdAL09p2U08D9EdSwCA==
# =RLFu
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 09 May 2024 10:02:10 AM CEST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240509' of https://gitlab.com/gaosong/qemu:
target/loongarch: Put cpucfg operation before CSR register
target/loongarch: Add TCG macro in structure CPUArchState
hw/loongarch: Refine default numa id calculation
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With numa_test test case, there is subcase named test_def_cpu_split(),
there are 8 sockets and 2 numa nodes. Here is command line:
"-machine smp.cpus=8,smp.sockets=8 -numa node,memdev=ram -numa node"
The required result is:
node 0 cpus: 0 2 4 6
node 1 cpus: 1 3 5 7
Test case numa_test fails on LoongArch, since the actual result is:
node 0 cpus: 0 1 2 3
node 1 cpus: 4 5 6 7
It will be better if all the cpus in one socket share the same numa
node. Here socket id is used to calculate numa id in function
virt_get_default_cpu_node_id().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240319022606.2994565-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
QEMU headers are relative to the include/ directory,
not to the project root directory. Remove "include/".
See also:
https://www.qemu.org/docs/master/devel/style.html#include-directives
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240507142737.95735-1-philmd@linaro.org>
Implement IOCSR address space get functions for MIPS/Loongson CPUs.
For MIPS/Loongson without IOCSR (i.e. Loongson-3A1000), get_cpu_iocsr_as
will return as null, and send_ipi_data will fail with MEMTX_DECODE_ERROR,
which matches expected behavior on hardware.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508-loongson3-ipi-v1-3-1a7b67704664@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This device will be shared among LoongArch and MIPS
based Loongson machine, rename it as loongson_ipi
to reflect this nature.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508-loongson3-ipi-v1-2-1a7b67704664@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since cpuid will be checked by ipi_getcpu anyway, there is
no point to enforce MAX_CPU here.
This also saved us from including loongarch board header.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508-loongson3-ipi-v1-1-1a7b67704664@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Suspend function is emulated as what hardware actually do.
Doorbell register fields are updates to include suspend value,
suspend vector is encoded in firmware blob and fw_cfg is updated
to include S3 bits as what x86 did.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-ID: <20240508-loongson3v-suspend-v1-1-186725524a39@flygoat.com>
[PMD: Use g_memdup2(), constify suspend array]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Rename LoongArchMachineState with LoongArchVirtMachineState, and change
variable name LoongArchMachineState *lams with LoongArchVirtMachineState
*lvms.
Rename function specific for virtmachine loongarch_xxx()
with virt_xxx(). However some common functions keep unchanged such as
loongarch_acpi_setup()/loongarch_load_kernel(), since there functions
can be used for real hw boards.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508031110.2507477-3-maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
On LoongArch system, there is only virt machine type now, name
LOONGARCH_MACHINE is confused, rename it with LOONGARCH_VIRT_MACHINE.
Machine name about Other real hw boards can be added in future.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508031110.2507477-2-maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The char pointer 'ramName' point to a block of memory,
but never free it. Use 'g_autofree' to automatically free it.
Resolves: Coverity CID 1544773
Fixes: 0cf1478d6 ("hw/loongarch: Add numa support")
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240507022239.3113987-1-gaosong@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Ensure that it can be used even if virt.c is not included in the build, as
is the case for --without-default-devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240507145135.270803-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The 'ref405ep' machine and PPC 405 CPU have no known users, firmware
images are not available, OpenWRT dropped support in 2019, U-Boot in
2017, Linux also is dropping support in 2024. It is time to let go of
this ancient hardware and focus on newer CPUs and platforms.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20240507123332.641708-1-clg@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As far as I can tell it was never used.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240505171444.333302-5-dave@treblig.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The function is inspired by pc_isa_bios_init() and should eventually replace it.
Using x86_isa_bios_init() rather than pc_isa_bios_init() fixes pflash commands
to work in the isa-bios region.
While at it convert the magic number 0x100000 (== 1MiB) to increase readability.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20240508175507.22270-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fix the leaking in x86_bios_rom_init() by adding a "bios" attribute to
X86MachineState. Note that it is only used in the -bios case.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20240508175507.22270-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fix the leaking in x86_bios_rom_init() and pc_isa_bios_init() by adding an
"isa_bios" attribute to X86MachineState.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20240508175507.22270-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The function creates and leaks two MemoryRegion objects regarding the BIOS which
will be moved into X86MachineState in the next steps to avoid the leakage.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240430150643.111976-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Given that memory_region_set_readonly() is a no-op when the readonlyness is
already as requested it is possible to simplify the pattern
if (condition) {
foo(true);
}
to
foo(condition);
which is shorter and allows to see the invariant of the code more easily.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240430150643.111976-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The i440fx and the isapc machines can be used in binaries without
FDC, too. We just have to make sure that they don't try to instantiate
the FDC when it is not available.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240425184315.553329-4-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The q35 machine can be used without floppy disk controller (FDC),
but due to our current Kconfig setup, the FDC code is still always
included in the binary. To fix this, the "PC" config option should
only imply the "FDC_ISA" instead of always selecting it.
The i440fx and the isa-pc machine currently always instantiate
the FDC, so we have to add the select statements now there instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240425184315.553329-3-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The q35 machine can work without FDC. But to be able to also link
a QEMU binary that does not include the FDC code, we have to make
it possible to disable the spots that call into the FDC code.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240425184315.553329-2-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
