Commit Graph

109612 Commits

Author SHA1 Message Date
Helge Deller
e722e5a112 target/hppa: Fix calculation of CR_IIASQ back register
Need to use iasq_b and iaoq_b to determine back register of CR_IIASQ.
This fixes random faults when booting up Linux user space.

Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-11-13 09:17:07 -08:00
Richard Henderson
576fc9376d target/hppa: Use PRIV_P_TO_MMU_IDX in helper_probe
Direct privilege level to mmu_idx mapping has been
false for some time.  Provide the correct value to
hppa_get_physical_address.

Fixes: fa824d99f9 ("target/hppa: Switch to use MMU indices 11-15")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-11-13 09:17:07 -08:00
Richard Henderson
e5d487c972 target/hppa: Use only low 2 immediate bits for PROBEI
During the conversion to decodetree, the 2-bit mask was lost.

Fixes: deee69a19f ("target/hppa: Convert memory management insns")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-11-13 09:16:36 -08:00
Nikita Ostrenkov
f6e8d1ef05 target/arm/tcg: enable PMU feature for Cortex-A8 and A9
According to the technical reference manual, the Cortex-A9
has a Perfomance Unit Monitor (PMU):
https://developer.arm.com/documentation/100511/0401/performance-monitoring-unit/about-the-performance-monitoring-unit
The Cortex-A8 does also.

We already already define the PMU registers when emulating the
Cortex-A8 and Cortex-A9, because we put them in v7_cp_reginfo[]
rather than guarding them behind ARM_FEATURE_PMU.  So the only thing
that setting the feature bit changes is that the registers actually
do something.

Enable ARM_FEATURE_PMU for Cortex-A8 and Cortex-A9, to avoid
this anomaly.

(The A8 and A9 PMU predates the standardisation of ID_DFR0.PerfMon,
so the field there is 0, but the PMU is still present.)

Signed-off-by: Nikita Ostrenkov <n.ostrenkov@gmail.com>
Message-id: 20231112165658.2335-1-n.ostrenkov@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message; also enable PMU for A8]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-11-13 16:31:41 +00:00
Ani Sinha
0034d0395e tests/avocado: add test to exercise processor address space memory bound checks
QEMU has validations to make sure that a VM is not started with more memory
(static and hotpluggable memory) than what the guest processor can address
directly with its addressing bits. This change adds a test to make sure QEMU
fails to start with a specific error message when an attempt is made to
start a VM with more memory than what the processor can directly address.
The test also checks for passing cases when the address space of the processor
is capable of addressing all memory. Boundary cases are tested.

CC: imammedo@redhat.com
CC: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-ID: <20231109045601.33349-1-anisinha@redhat.com>
Message-ID: <D5D8D419-76BA-4FB0-9BAC-4F7470A052FC@redhat.com>
[PMD: Use SPDX tag]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-13 16:56:24 +01:00
Alexandra Diupina
4c7ae73caf hw/display/vmware_vga: fix probably typo
When calling trace_vmware_verify_rect_greater_than_bound() replace
"y" with "h" and y with h

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 02218aedb1 ("hw/display/vmware_vga: replace fprintf calls with trace events")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231110174104.13280-1-adiupina@astralinux.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-13 16:56:24 +01:00
Marc-André Lureau
52c773ce89 hw/mips: LOONGSON3V depends on UNIMP device
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: qemu-stable@nongnu.org
Fixes: c76b409fef ("hw/mips: Add Loongson-3 machine support")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231107140615.3034763-1-marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-13 16:56:06 +01:00
Peter Maydell
4d044472ab target/arm: Correct MTE tag checking for reverse-copy MOPS
When we are doing a FEAT_MOPS copy that must be performed backwards,
we call mte_mops_probe_rev(), passing it the address of the last byte
in the region we are probing.  However, allocation_tag_mem_probe()
wants the address of the first byte to get the tag memory for.
Because we passed it (ptr, size) we could incorrectly trip the
allocation_tag_mem_probe() check for "does this access run across to
the following page", and if that following page happened not to be
valid then we would assert.

We know we will always be only dealing with a single page because the
code that calls mte_mops_probe_rev() ensures that.  We could make
mte_mops_probe_rev() pass 'ptr - (size - 1)' to
allocation_tag_mem_probe(), but then we would have to adjust the
returned 'mem' pointer to get back to the tag RAM for the last byte
of the region.  It's simpler to just pass in a size of 1 byte,
because we know that allocation_tag_mem_probe() in pure-probe
single-page mode doesn't care about the size.

Fixes: 69c51dc372 ("target/arm: Implement MTE tag-checking functions for FEAT_MOPS copies")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231110162546.2192512-1-peter.maydell@linaro.org
2023-11-13 13:15:50 +00:00
Peter Maydell
fc58891d04 target/arm: HVC at EL3 should go to EL3, not EL2
AArch64 permits code at EL3 to use the HVC instruction; however the
exception we take should go to EL3, not down to EL2 (see the pseudocode
AArch64.CallHypervisor()). Fix the target EL.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Message-id: 20231109151917.1925107-1-peter.maydell@linaro.org
2023-11-13 13:15:31 +00:00
Jean-Philippe Brucker
1d675e59ea hw/arm/virt: fix GIC maintenance IRQ registration
Since commit 9036e917f8 ("{include/}hw/arm: refactor virt PPI logic"),
GIC maintenance IRQ registration fails on arm64:

[    0.979743] kvm [1]: Cannot register interrupt 9

That commit re-defined VIRTUAL_PMU_IRQ to be a INTID but missed a case
where the maintenance IRQ is actually referred by its PPI index. Just
like commit fa68ecb330 ("hw/arm/virt: fix PMU IRQ registration"), use
INITID_TO_PPI(). A search of "GIC_FDT_IRQ_TYPE_PPI" indicates that there
shouldn't be more similar issues.

Fixes: 9036e917f8 ("{include/}hw/arm: refactor virt PPI logic")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20231110090557.3219206-2-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-11-13 13:13:49 +00:00
Stefan Hajnoczi
f78ea7ddb0 * Fix compilation with Clang 17 on s390x hosts
* Two small s390x PCI fixes
 * Update MAINTAINERS file with more entries
 * Fix NetBSD VM test
 * Clean up some bad wordings
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmVSAoIRHHRodXRoQHJl
 ZGhhdC5jb20ACgkQLtnXdP5wLbVXBg//VVZS5CXEfOFV91I1kqQnLCvgwmuAyqEg
 PI2/HBxuhzeBx+F1t7uR0n15tUPi1zkFFBOpyBDBubvWcp4vGvFwLQoiBCUvNzBA
 +b1vMySP+K0OO1X5yT3cFHXF9q0o0V5WADwemf5RglIPjlTOIiz9qhD4EYqd2QHC
 EUd9Y45DP4Y0V5raHLjY990f/zr3PuSAB6MASFTUnKdgGkRqonLWdLDdIZNDrZuL
 oGwx1ALXgBOMV3yNyQx9jZBT24git/ai1vd9AU/d3JRKDPsd+4vC39+PTI9NH4h6
 oQglvo399f64cir1f1JJ3MN4ZtwXZpwUkjeTMcR9XZxk7GibU7P2arG5M3TERdmE
 VLqylYsnbJojWOeCH+TViJapRhg1CzUveVlQofr7GHvf2N3oy3BrKaV715gauEyW
 zpjbhSPpIQu9WFXt8+tSquqbvpAP/VlLrOV73D4LzJ7WdTa9CHmSek8D0zoRQDZR
 8OixrgoBKS+pmBDmTve5gFsIKhZIz9CrmaAKKYdskC8blENxCng8LOFp7sg2PK3M
 U0lWYoDS7qZ85761Bl+QaBdFocdahQqkO/LUQuhoSt2OvA1EGAz2FdVSKkmPDdSS
 P/homr4hOXIqJFSsZj0YNUTIXsXwLBvKjvcJPAWYgbXZhim0LtPQTQO3+ignwGyu
 RXjaVkvkf/s=
 =+2rp
 -----END PGP SIGNATURE-----

Merge tag 'pull-request-2023-11-13' of https://gitlab.com/thuth/qemu into staging

* Fix compilation with Clang 17 on s390x hosts
* Two small s390x PCI fixes
* Update MAINTAINERS file with more entries
* Fix NetBSD VM test
* Clean up some bad wordings

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmVSAoIRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVXBg//VVZS5CXEfOFV91I1kqQnLCvgwmuAyqEg
# PI2/HBxuhzeBx+F1t7uR0n15tUPi1zkFFBOpyBDBubvWcp4vGvFwLQoiBCUvNzBA
# +b1vMySP+K0OO1X5yT3cFHXF9q0o0V5WADwemf5RglIPjlTOIiz9qhD4EYqd2QHC
# EUd9Y45DP4Y0V5raHLjY990f/zr3PuSAB6MASFTUnKdgGkRqonLWdLDdIZNDrZuL
# oGwx1ALXgBOMV3yNyQx9jZBT24git/ai1vd9AU/d3JRKDPsd+4vC39+PTI9NH4h6
# oQglvo399f64cir1f1JJ3MN4ZtwXZpwUkjeTMcR9XZxk7GibU7P2arG5M3TERdmE
# VLqylYsnbJojWOeCH+TViJapRhg1CzUveVlQofr7GHvf2N3oy3BrKaV715gauEyW
# zpjbhSPpIQu9WFXt8+tSquqbvpAP/VlLrOV73D4LzJ7WdTa9CHmSek8D0zoRQDZR
# 8OixrgoBKS+pmBDmTve5gFsIKhZIz9CrmaAKKYdskC8blENxCng8LOFp7sg2PK3M
# U0lWYoDS7qZ85761Bl+QaBdFocdahQqkO/LUQuhoSt2OvA1EGAz2FdVSKkmPDdSS
# P/homr4hOXIqJFSsZj0YNUTIXsXwLBvKjvcJPAWYgbXZhim0LtPQTQO3+ignwGyu
# RXjaVkvkf/s=
# =+2rp
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 13 Nov 2023 06:03:30 EST
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* tag 'pull-request-2023-11-13' of https://gitlab.com/thuth/qemu:
  hw/audio/es1370: Clean up comment
  tests/tsan: Rename the file with the entries that should be ignored
  test-resv-mem: Fix CID 1523911
  tests/vm/netbsd: Use Python v3.11
  MAINTAINERS: Add a general architecture section for x86
  MAINTAINERS: Extend the Stellaris section
  MAINTAINERS: Add hw/display/sii9022.c to the Versatile Express section
  MAINTAINERS: Add hw/input/ads7846.c to the PXA2XX section
  MAINTAINERS: Add include/hw/input/pl050.h to the PrimeCell/CMSDK section
  s390x/pci: only limit DMA aperture if vfio DMA limit reported
  s390x/pci: bypass vfio DMA counting when using cdev
  host/include/generic/host/atomic128: Fix compilation problem with Clang 17

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-11-13 07:15:43 -05:00
Stefan Hajnoczi
05fa22770a QAPI patches patches for 2023-11-13
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmVR7j4SHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTmT0P/imN9c6xnkx8Kff0iEaT88N8YUHEu5gt
 ECiQtfpbU8y8itIrWpuXWk7HUC1Jp397vKgUhmmr5Im32vx1waUGz/zxdBiitw0a
 2McXfD6Lbz3LN+q002Vq0QjP3tMeoc8DoP/CagmdXniGrxyJSs/oIsUAdqZnymug
 ZREYRUlbrgJ8XA06n9qIaCGpiihBLl2XBbx4SV9JWle/9vKpII9EBrWNXTcCkde3
 W6gHEKgGAKa1NGYMJtOncanpnzVP0qoLmb3jmiR9tpj3YBB/5LP9l4O11DTC+PQ5
 nn+OmtmjuKE2a2C79Y8VCbRPR6MPSDDbuWwu7Q+A7vXi/1gnkMeXH+A6jE0d3y+p
 PWKqBK65U+yS0IwiUGpMpcGo2WtZiBLzp3ragt+gzi3gV5GvEvPv0uvcEd66in95
 +M2RoVhkbi+e03mF+vDldvbwBYPwlNdgAX/ly7SR76YZybSMK0Jkp7yfvxN35LJc
 kgCo0CY9kAYYUgPUJMiPhaxSfRVk738Qex7QCvFwDiZE8l4XEwoT1PRO0fs8G5aI
 /Yz7hhjkaLw+i+k/tCVCVe+hOgMxxVUz/gZzV4+yrfQNxz41v4WqCfE8a+m6RROo
 TaceVJPKqsyoJ2zmS+CpEPFWkWXEQSQ14yu2wdF8wMyKEWDS4yhRG78rnYC2/ZhC
 zullCL7QfFbf
 =bGOD
 -----END PGP SIGNATURE-----

Merge tag 'pull-qapi-2023-11-13' of https://repo.or.cz/qemu/armbru into staging

QAPI patches patches for 2023-11-13

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmVR7j4SHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTmT0P/imN9c6xnkx8Kff0iEaT88N8YUHEu5gt
# ECiQtfpbU8y8itIrWpuXWk7HUC1Jp397vKgUhmmr5Im32vx1waUGz/zxdBiitw0a
# 2McXfD6Lbz3LN+q002Vq0QjP3tMeoc8DoP/CagmdXniGrxyJSs/oIsUAdqZnymug
# ZREYRUlbrgJ8XA06n9qIaCGpiihBLl2XBbx4SV9JWle/9vKpII9EBrWNXTcCkde3
# W6gHEKgGAKa1NGYMJtOncanpnzVP0qoLmb3jmiR9tpj3YBB/5LP9l4O11DTC+PQ5
# nn+OmtmjuKE2a2C79Y8VCbRPR6MPSDDbuWwu7Q+A7vXi/1gnkMeXH+A6jE0d3y+p
# PWKqBK65U+yS0IwiUGpMpcGo2WtZiBLzp3ragt+gzi3gV5GvEvPv0uvcEd66in95
# +M2RoVhkbi+e03mF+vDldvbwBYPwlNdgAX/ly7SR76YZybSMK0Jkp7yfvxN35LJc
# kgCo0CY9kAYYUgPUJMiPhaxSfRVk738Qex7QCvFwDiZE8l4XEwoT1PRO0fs8G5aI
# /Yz7hhjkaLw+i+k/tCVCVe+hOgMxxVUz/gZzV4+yrfQNxz41v4WqCfE8a+m6RROo
# TaceVJPKqsyoJ2zmS+CpEPFWkWXEQSQ14yu2wdF8wMyKEWDS4yhRG78rnYC2/ZhC
# zullCL7QfFbf
# =bGOD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 13 Nov 2023 04:37:02 EST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* tag 'pull-qapi-2023-11-13' of https://repo.or.cz/qemu/armbru:
  tests/qapi-schema: Tidy up pylint warnings and advice
  sphinx/qapidoc: Tidy up pylint warning raise-missing-from
  qapi: Fix QAPISchemaEntity.__repr__()

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-11-13 07:15:30 -05:00
Stefan Hajnoczi
c86a59fd34 -Wshadow=local patches for 2023-11-13
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmVR7ZISHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZT7YkP/RUaHzka7vJhcAJSFgCviZ7NYZFbDYkT
 MT9Hi4XYYkOqS0BQ9xZPZDy47oB4pqZlNfMCUD3vmD8LLdVsUyRIbZxu59SdgTOa
 dnNvXIsC16y7Hk6VRfWB4bifOa1rmbF2el5WevA1UpXMRnjkMbtahbXXlSudQpeQ
 Y0e5mILKcbLD1Q6RuTounkfZ/C5pJZKycxVrN8YvFBQ2pILR/JtVwCU9rQ525Sgx
 tgScQ+Z+S4Pw+hyD8kpnw+xqk/iXprgX7GmOhCiy4yLdndq1nZgXOXnZvuIvG3n2
 cvM+dNTVH32qlLMqNdwAaOjAVStobdt85oiyMTnkBfi1+6B+5I6FzyH31/XhV86t
 siCqZ1vsL8N8cuA9mhbKS2eaLrf4ubAyh07SycaKNWfxVMgIAN0rpqaUzKghGcT3
 y9TfFI48zKgCS8AmMuUYy9G6xPlQy726ZHi4yb+t+j2dDx80eAQyXZRPQBiEomND
 cIotxEAPdAdl+52lCwMpYPt+rnxGg4EW05de/CrjKag9Fizfz4cOuwCsSp32XuNe
 TmE1Gi3pKaX/goLO2oTesZ6h8rbMoGZ3XG7YWoIkDpjb+XKuUXXxg+b1cv/0dntk
 Qn6izIFdSscYXakxAkq6ci/3xS0ork3FXjDHihOKj9IWR8YrhqaDZ//XHnIL1Ld7
 QcXs7wElHeJM
 =66br
 -----END PGP SIGNATURE-----

Merge tag 'pull-shadow-2023-11-13' of https://repo.or.cz/qemu/armbru into staging

-Wshadow=local patches for 2023-11-13

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmVR7ZISHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZT7YkP/RUaHzka7vJhcAJSFgCviZ7NYZFbDYkT
# MT9Hi4XYYkOqS0BQ9xZPZDy47oB4pqZlNfMCUD3vmD8LLdVsUyRIbZxu59SdgTOa
# dnNvXIsC16y7Hk6VRfWB4bifOa1rmbF2el5WevA1UpXMRnjkMbtahbXXlSudQpeQ
# Y0e5mILKcbLD1Q6RuTounkfZ/C5pJZKycxVrN8YvFBQ2pILR/JtVwCU9rQ525Sgx
# tgScQ+Z+S4Pw+hyD8kpnw+xqk/iXprgX7GmOhCiy4yLdndq1nZgXOXnZvuIvG3n2
# cvM+dNTVH32qlLMqNdwAaOjAVStobdt85oiyMTnkBfi1+6B+5I6FzyH31/XhV86t
# siCqZ1vsL8N8cuA9mhbKS2eaLrf4ubAyh07SycaKNWfxVMgIAN0rpqaUzKghGcT3
# y9TfFI48zKgCS8AmMuUYy9G6xPlQy726ZHi4yb+t+j2dDx80eAQyXZRPQBiEomND
# cIotxEAPdAdl+52lCwMpYPt+rnxGg4EW05de/CrjKag9Fizfz4cOuwCsSp32XuNe
# TmE1Gi3pKaX/goLO2oTesZ6h8rbMoGZ3XG7YWoIkDpjb+XKuUXXxg+b1cv/0dntk
# Qn6izIFdSscYXakxAkq6ci/3xS0ork3FXjDHihOKj9IWR8YrhqaDZ//XHnIL1Ld7
# QcXs7wElHeJM
# =66br
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 13 Nov 2023 04:34:10 EST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* tag 'pull-shadow-2023-11-13' of https://repo.or.cz/qemu/armbru:
  meson: Enable -Wshadow=local
  block/snapshot: Fix compiler warning with -Wshadow=local

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-11-13 07:15:19 -05:00
Stefan Hajnoczi
616425d452 Hi,
"Host Memory Backends" and "Memory devices" queue ("mem"):
 - One virtio-mem fix leading to a QEMU crash in QEMU debug builds
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEG9nKrXNcTDpGDfzKTd4Q9wD/g1oFAmVR4DsRHGRhdmlkQHJl
 ZGhhdC5jb20ACgkQTd4Q9wD/g1qKMQ//fe/4mJOXQ8l5OZ3ScpC2K7yoB9dowJiQ
 vobja0X0UhyMIOEH4V5RDtMrW3WcYzD2rVwehpLel3QbwcGa7TTB8NtkTx/t4L8P
 tRQe3epGvz+0Kkx4kBFcNBYNR5Skl1rg9kcDhYxNmoOLngWjJcDqRBryfc3V9pEs
 dl9sWXaQn82MGNQGuWFnTOUeOgg1LIdKMRcU2AzhAhrA/e4BqOof/JW+PVdQfzDq
 4Jhq74pDmKiuH9GmRZgbNlNFX+GxRk63jJrRw4HDAbSD5dBmVnLAjgFZ0sBcKxe0
 HyiGrZOZNIMhMl/GwwQ7NilN03Hl6Hqlx03nz96/2DbiEKr6sOAErIclkUOVlr7k
 YeJvFv+iijqyC4XF43OqoIOz8mtkxan8CuiZW/6/FV9mS/Rb3r8of/BnrK2a8/Kh
 RJLX3tsmrxFdFDxVXWPw+UYrJy8g0xQP2Ils3OReO8QO9qqCytPqJFQsSHDlK3T3
 2K5FiDpMu7cjFezLyRF0LkPSWg1CV7D6Vc8mp+amc2K4Ltiyhp4xZ2TBKrEC8HHE
 zs+EyEIfsna4SaKwVUVRimWF3+B4GojoAcAD0zju+uhD8Zw+z553zXpr5TSx0Une
 cbMs1n5MTzE6pQo1MmL3hu1xaf6Xdx7hnJPlcnjlKXGFol8ghv6tBkHbOQA5B1/H
 7hVX43f3epM=
 =7M1K
 -----END PGP SIGNATURE-----

Merge tag 'mem-2023-11-13' of https://github.com/davidhildenbrand/qemu into staging

Hi,

"Host Memory Backends" and "Memory devices" queue ("mem"):
- One virtio-mem fix leading to a QEMU crash in QEMU debug builds

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEG9nKrXNcTDpGDfzKTd4Q9wD/g1oFAmVR4DsRHGRhdmlkQHJl
# ZGhhdC5jb20ACgkQTd4Q9wD/g1qKMQ//fe/4mJOXQ8l5OZ3ScpC2K7yoB9dowJiQ
# vobja0X0UhyMIOEH4V5RDtMrW3WcYzD2rVwehpLel3QbwcGa7TTB8NtkTx/t4L8P
# tRQe3epGvz+0Kkx4kBFcNBYNR5Skl1rg9kcDhYxNmoOLngWjJcDqRBryfc3V9pEs
# dl9sWXaQn82MGNQGuWFnTOUeOgg1LIdKMRcU2AzhAhrA/e4BqOof/JW+PVdQfzDq
# 4Jhq74pDmKiuH9GmRZgbNlNFX+GxRk63jJrRw4HDAbSD5dBmVnLAjgFZ0sBcKxe0
# HyiGrZOZNIMhMl/GwwQ7NilN03Hl6Hqlx03nz96/2DbiEKr6sOAErIclkUOVlr7k
# YeJvFv+iijqyC4XF43OqoIOz8mtkxan8CuiZW/6/FV9mS/Rb3r8of/BnrK2a8/Kh
# RJLX3tsmrxFdFDxVXWPw+UYrJy8g0xQP2Ils3OReO8QO9qqCytPqJFQsSHDlK3T3
# 2K5FiDpMu7cjFezLyRF0LkPSWg1CV7D6Vc8mp+amc2K4Ltiyhp4xZ2TBKrEC8HHE
# zs+EyEIfsna4SaKwVUVRimWF3+B4GojoAcAD0zju+uhD8Zw+z553zXpr5TSx0Une
# cbMs1n5MTzE6pQo1MmL3hu1xaf6Xdx7hnJPlcnjlKXGFol8ghv6tBkHbOQA5B1/H
# 7hVX43f3epM=
# =7M1K
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 13 Nov 2023 03:37:15 EST
# gpg:                using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A
# gpg:                issuer "david@redhat.com"
# gpg: Good signature from "David Hildenbrand <david@redhat.com>" [unknown]
# gpg:                 aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full]
# gpg:                 aka "David Hildenbrand <hildenbr@in.tum.de>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1BD9 CAAD 735C 4C3A 460D  FCCA 4DDE 10F7 00FF 835A

* tag 'mem-2023-11-13' of https://github.com/davidhildenbrand/qemu:
  virtio-mem: fix division by zero in virtio_mem_activate_memslots_to_plug()

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-11-13 07:15:06 -05:00
Stefan Hajnoczi
c96c116e10 MAINTAINERS: update virtio-fs mailing list address
The old virtio-fs mailing list address is no longer in use. Switch to
the new mailing list address.

Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: German Maglione <gmaglione@redhat.com>
Cc: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231111004920.148348-1-stefanha@redhat.com>
2023-11-13 07:13:35 -05:00
Peter Maydell
4409a6d855 hw/audio/es1370: Clean up comment
Replace a sweary comment with one that's a bit more helpful to
future readers of the code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Message-ID: <20231110164318.2197569-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-11-13 11:35:47 +01:00
Thomas Huth
f9a19bd8d2 tests/tsan: Rename the file with the entries that should be ignored
Let's use a better file name here.

Message-ID: <20231109174720.375873-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-11-13 11:35:47 +01:00
Eric Auger
2e990d81d9 test-resv-mem: Fix CID 1523911
Coverity complains about passing "&expected" to "run_range_inverse_array",
which dereferences null "expected". I guess the problem is that the
compare_ranges() loop dereferences 'e' without testing it. However the
loop condition is based on 'ranges' which is garanteed to have
the same length as 'expected' given the g_assert_cmpint() just
before the loop. So the code looks safe to me.

Nevertheless adding a test on expected before the loop to get rid of the
warning.

Fixes: CID 1523901
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Coverity (CID 1523901)
Message-ID: <20231110083654.277345-1-eric.auger@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-11-13 11:35:47 +01:00
Philippe Mathieu-Daudé
00ac955b06 tests/vm/netbsd: Use Python v3.11
We requiere the 'ninja-build', which depends on 'python311':

  $ pkgin show-deps ninja-build
  direct dependencies for ninja-build-1.11.1nb1
          python311>=3.11.0

So we end up installing both Python v3.10 and v3.11:

  [31/76] installing python311-3.11.5...
  [54/76] installing python310-3.10.13...
  [74/76] installing py310-expat-3.10.13nb1...

Then the build system picks Python v3.11, and doesn't find
py-expat because we only installed the 3.10 version:

  python determined to be '/usr/pkg/bin/python3.11'
  python version: Python 3.11.5

  *** Ouch! ***

  Python's pyexpat module is not found.
  It's normally part of the Python standard library, maybe your distribution packages it separately?
  Either install pyexpat, or alleviate the need for it in the first place by installing pip and setuptools for '/usr/pkg/bin/python3.11'.

  (Hint: NetBSD's pkgsrc debundles this to e.g. 'py310-expat'.)

  ERROR: python venv creation failed

Fix by installing py-expat for v3.11. Remove the v3.10
packages since we aren't using them anymore.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231109150900.91186-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-11-13 11:35:47 +01:00
Thomas Huth
d229996b40 MAINTAINERS: Add a general architecture section for x86
It's a little bit weird that the files in target/i386/ which
are not in a subfolder there do not have any associated
maintainer (and thus nobody might be CC:-ed on changes to
these files). We should have a general x86 section for these
files, similar to what we already have for s390x and mips.
Since Paolo is already listed as maintainer for both, the
x86 KVM and TCG CPUs, I'd like to suggest him as maintainer
for the general files, too.

Message-ID: <20230929134551.395438-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-11-13 11:35:47 +01:00
Thomas Huth
7c7e1f6017 MAINTAINERS: Extend the Stellaris section
This header include/hw/timer/stellaris-gptm.h obviously belongs to the
Stellaris machines, so let's add it to the corresponding section.

And hw/display/ssd0303.c and hw/display/ssd0323.c are only used
by hw/arm/stellaris.c, so add them to the corresponding section
in the MAINTAINERS file, too.

Message-ID: <20231020060936.524988-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-11-13 11:35:47 +01:00
Thomas Huth
42c31682ba MAINTAINERS: Add hw/display/sii9022.c to the Versatile Express section
This graphics adapter is only used by the Versatile Express machine,
so add it to the corresponding section in MAINTAINERS.

Message-ID: <20231020060936.524988-4-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-11-13 11:35:47 +01:00
Thomas Huth
261c1281e8 MAINTAINERS: Add hw/input/ads7846.c to the PXA2XX section
The code from hw/input/ads7846.c is only used by hw/arm/spitz.c,
so add this file to the same section where hw/arm/spitz.c is
listed.

Message-ID: <20231020060936.524988-3-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-11-13 11:35:47 +01:00
Thomas Huth
4940da2096 MAINTAINERS: Add include/hw/input/pl050.h to the PrimeCell/CMSDK section
The corresponding pl050.c file is already listed here, so we should
mention the header here, too.

Message-ID: <20231020060936.524988-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-11-13 11:35:47 +01:00
Matthew Rosato
8011b508cf s390x/pci: only limit DMA aperture if vfio DMA limit reported
If the host kernel lacks vfio DMA limit reporting, do not attempt
to shrink the guest DMA aperture.

Fixes: df202e3ff3 ("s390x/pci: shrink DMA aperture to be bound by vfio DMA limit")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20231110175108.465851-3-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-11-13 11:35:47 +01:00
Matthew Rosato
0ab3565840 s390x/pci: bypass vfio DMA counting when using cdev
The current code assumes that there is always a vfio group, but
that's no longer guaranteed with the iommufd backend when using
cdev.  In this case, we don't need to track the vfio dma limit
anyway.

Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20231110175108.465851-2-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-11-13 11:35:47 +01:00
Thomas Huth
34aee9c946 host/include/generic/host/atomic128: Fix compilation problem with Clang 17
When compiling QEMU with Clang 17 on a s390x, the compilation fails:

In file included from ../accel/tcg/cputlb.c:32:
In file included from /root/qemu/include/exec/helper-proto-common.h:10:
In file included from /root/qemu/include/qemu/atomic128.h:62:
/root/qemu/host/include/generic/host/atomic128-ldst.h:68:15: error:
 __sync builtin operation MUST have natural alignment (consider using __
atomic). [-Werror,-Wsync-alignment]
   68 |     } while (!__sync_bool_compare_and_swap_16(ptr_align, old, new.i));
      |               ^
In file included from ../accel/tcg/cputlb.c:32:
In file included from /root/qemu/include/exec/helper-proto-common.h:10:
In file included from /root/qemu/include/qemu/atomic128.h:61:
/root/qemu/host/include/generic/host/atomic128-cas.h:36:11: error:
 __sync builtin operation MUST have natural alignment (consider using __a
tomic). [-Werror,-Wsync-alignment]
   36 |     r.i = __sync_val_compare_and_swap_16(ptr_align, c.i, n.i);
      |           ^
2 errors generated.

It's arguably a bug in Clang since we already use __builtin_assume_aligned()
to tell the compiler that the pointer is properly aligned. But according to
https://github.com/llvm/llvm-project/issues/69146 it seems like the Clang
folks don't see an easy fix on their side and recommend to use a type
declared with __attribute__((aligned(16))) to work around this problem.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1934
Message-ID: <20231108085954.313071-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-11-13 11:35:47 +01:00
Markus Armbruster
5c24c3e2f3 tests/qapi-schema: Tidy up pylint warnings and advice
Pylint warns:

    tests/qapi-schema/test-qapi.py:139:13: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
    tests/qapi-schema/test-qapi.py:143:13: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)

Add encoding='utf-8'.

Pylint advises:

    tests/qapi-schema/test-qapi.py:143:13: R1732: Consider using 'with' for resource-allocating operations (consider-using-with)

Silence this by returning the value directly.

Pylint advises:

    tests/qapi-schema/test-qapi.py:221:4: R1722: Consider using sys.exit() (consider-using-sys-exit)
    tests/qapi-schema/test-qapi.py:226:4: R1722: Consider using sys.exit() (consider-using-sys-exit)

Sure, why not.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231025092925.1785934-1-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2023-11-13 10:36:51 +01:00
Markus Armbruster
c375f05ef5 sphinx/qapidoc: Tidy up pylint warning raise-missing-from
Pylint advises:

    docs/sphinx/qapidoc.py:518:12: W0707: Consider explicitly re-raising using 'raise ExtensionError(str(err)) from err' (raise-missing-from)

>From its manual:

    Python's exception chaining shows the traceback of the current
    exception, but also of the original exception.  When you raise a
    new exception after another exception was caught it's likely that
    the second exception is a friendly re-wrapping of the first
    exception.  In such cases `raise from` provides a better link
    between the two tracebacks in the final error.

Makes sense, so do it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231025092159.1782638-2-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2023-11-13 10:36:51 +01:00
Markus Armbruster
6d133eef98 qapi: Fix QAPISchemaEntity.__repr__()
I messed it up on merge.  It's a debugging aid, so no impact on build.

Fixes: e307a8174b (qapi: provide a friendly string representation of QAPI classes)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231024104841.1569250-1-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-13 10:36:51 +01:00
Markus Armbruster
569205e4e9 meson: Enable -Wshadow=local
Local variables shadowing other local variables or parameters make the
code needlessly hard to understand.  Bugs love to hide in such code.
Evidence: commit bbde656263 (migration/rdma: Fix save_page method to
fail on polling error).

Enable -Wshadow=local to prevent such issues.  Possible thanks to
recent cleanups.  Enabling -Wshadow would prevent more issues, but
we're not yet ready for that.

As usual, the warning is only enabled when the compiler recognizes it.
GCC does, Clang doesn't.

Some shadowed locals remain in bsd-user.  Since BSD prefers Clang,
let's not wait for its cleanup.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231026053115.2066744-2-armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-11-13 10:32:57 +01:00
David Hildenbrand
364eff6885 virtio-mem: fix division by zero in virtio_mem_activate_memslots_to_plug()
When running with "dynamic-memslots=off", we enter
virtio_mem_activate_memslots_to_plug() to return immediately again
because "vmem->dynamic_memslots == false". However, the compiler might
not optimize out calculating start_idx+end_idx, where we divide by
vmem->memslot_size. In such a configuration, the memslot size is 0 and
we'll get a division by zero:

    (qemu) qom-set vmem0 requested-size 3G
    (qemu) q35.sh: line 38: 622940 Floating point exception(core dumped)

The same is true for virtio_mem_deactivate_unplugged_memslots(), however
we never really reach that code without a prior
virtio_mem_activate_memslots_to_plug() call.

Let's fix it by simply calling these functions only with
"dynamic-memslots=on".

This was found when using a debug build of QEMU.

Message-ID: <20231023111341.219317-1-david@redhat.com>
Reprted-by: Mario Casquero <mcasquer@redhat.com>
Fixes: 177f9b1ee4 ("virtio-mem: Expose device memory dynamically via multiple memslots if enabled")
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
2023-11-13 09:35:44 +01:00
Cédric Le Goater
d90014fc33 igb: Add Function Level Reset to PF and VF
The Intel 82576EB GbE Controller say that the Physical and Virtual
Functions support Function Level Reset. Add the capability to the PF
device model using device property "x-pcie-flr-init" which is "on" by
default and "off" for machines <= 8.1 to preserve compatibility.

The FLR capability of the VF model is defined according to the FLR
property of the PF, this to avoid adding an extra compatibility
property.

Cc: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-11-13 15:33:37 +08:00
Cédric Le Goater
fe73674af1 igb: Add a VF reset handler
Export the igb_vf_reset() helper routine from the PF model to let the
IGBVF model implement its own device reset.

Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Suggested-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-11-13 15:33:37 +08:00
Thomas Huth
6ab4f1c9e2 block/snapshot: Fix compiler warning with -Wshadow=local
No need to declare a new variable in the the inner code block
here, we can re-use the "ret" variable that has been declared
at the beginning of the function. With this change, the code
can now be successfully compiled with -Wshadow=local again.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231023175038.111607-1-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2023-11-13 07:41:35 +01:00
Helge Deller
881d1073d0 target/hppa: Mask reserved PSW bits in expand_sm_imm
The system mask is a restricted subset of the psw, with only
a couple of reserved bits.  It is better to handle this up
front in the translator than require helper_swap_system_mask
to use cpu_hppa_get_psw and cpu_hppa_put_psw.

Signed-off-by: Helge Deller <deller@gmx.de>
[rth: Handle this in expand_sm_imm not helper_swap_system_mask.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-11-12 09:01:22 -08:00
Stefan Hajnoczi
69680740ea qdev: Make array properties user accessible again
-----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmVOZicRHGt3b2xmQHJl
 ZGhhdC5jb20ACgkQfwmycsiPL9arpw/+NKGRhSMrSq9Az+z5+ANUfw5SNLJYf1hH
 jm5ITA1Gr9htqHtBfEOdkms2wef6m7onF72rHVUlBKdqCPNMGLme5B0oQ8PZ1X1t
 OxAZ8KYwlO98QvOYl617SA/8wxc0U4/zi192kJpbRkKF6KdbbMGtLKjHyEitA/Yv
 izx1vkKOgQyMFGF1JgIyG4R3WmsKQW1XLqb3emVNRzCqmJpkvMJZQG8tnyEAXlIS
 gkY69cTpaKVaM1OxdB45gjlKTGzLWC/3tTGH+u8q356fvgm/QIgrokCirCZFPIl0
 C8hvzPm/L8hkvWtUb3EZx0DLiunWcAGvoLgBNODHojKRtQ6X9TRTrjJ41ZCLXVqv
 tVJm+XGKC0CZ/WW5yqVOmnzfPH4z8ubzSoRv5ryz3xDb5B/Zr10+ScE+/Ee24wJ2
 HIehxc1LgVGGpikP88/Ns/nAlIVUQxxYvSJ23R5D1+UpP6FCy6Y1pKyRtZGzPCIe
 N4Y+52GtelBR8gOjay5INn/Yf8Fh6sFxX556BW0XKYcbQgvl2bxASe/KVnAVZ1NB
 8DsaAWlK+hPGopwyp2lDRuGd4kusNbzQvIUZ0mr1g9HQ/iSnT/9RFdExsj+K6QTr
 pX42QCe4mWHPAKx38cez+Bhx4TEOw+GmHuTp/oLdBRuY8DPu/I0Ny364uiW+At/R
 8jF+jt5uVZc=
 =MV6O
 -----END PGP SIGNATURE-----

Merge tag 'qdev-array-prop' of https://repo.or.cz/qemu/kevin into staging

qdev: Make array properties user accessible again

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmVOZicRHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9arpw/+NKGRhSMrSq9Az+z5+ANUfw5SNLJYf1hH
# jm5ITA1Gr9htqHtBfEOdkms2wef6m7onF72rHVUlBKdqCPNMGLme5B0oQ8PZ1X1t
# OxAZ8KYwlO98QvOYl617SA/8wxc0U4/zi192kJpbRkKF6KdbbMGtLKjHyEitA/Yv
# izx1vkKOgQyMFGF1JgIyG4R3WmsKQW1XLqb3emVNRzCqmJpkvMJZQG8tnyEAXlIS
# gkY69cTpaKVaM1OxdB45gjlKTGzLWC/3tTGH+u8q356fvgm/QIgrokCirCZFPIl0
# C8hvzPm/L8hkvWtUb3EZx0DLiunWcAGvoLgBNODHojKRtQ6X9TRTrjJ41ZCLXVqv
# tVJm+XGKC0CZ/WW5yqVOmnzfPH4z8ubzSoRv5ryz3xDb5B/Zr10+ScE+/Ee24wJ2
# HIehxc1LgVGGpikP88/Ns/nAlIVUQxxYvSJ23R5D1+UpP6FCy6Y1pKyRtZGzPCIe
# N4Y+52GtelBR8gOjay5INn/Yf8Fh6sFxX556BW0XKYcbQgvl2bxASe/KVnAVZ1NB
# 8DsaAWlK+hPGopwyp2lDRuGd4kusNbzQvIUZ0mr1g9HQ/iSnT/9RFdExsj+K6QTr
# pX42QCe4mWHPAKx38cez+Bhx4TEOw+GmHuTp/oLdBRuY8DPu/I0Ny364uiW+At/R
# 8jF+jt5uVZc=
# =MV6O
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 11 Nov 2023 01:19:35 HKT
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* tag 'qdev-array-prop' of https://repo.or.cz/qemu/kevin:
  qdev: Rework array properties based on list visitor
  qdev: Make netdev properties work as list elements
  qom: Add object_property_set_default_list()
  hw/rx/rx62n: Use qdev_prop_set_array()
  hw/arm/xlnx-versal: Use qdev_prop_set_array()
  hw/arm/virt: Use qdev_prop_set_array()
  hw/arm/vexpress: Use qdev_prop_set_array()
  hw/arm/sbsa-ref: Use qdev_prop_set_array()
  hw/arm/mps2: Use qdev_prop_set_array()
  hw/arm/mps2-tz: Use qdev_prop_set_array()
  hw/i386/pc: Use qdev_prop_set_array()

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-11-11 11:23:25 +08:00
Kevin Wolf
b06f8b500d qdev: Rework array properties based on list visitor
Until now, array properties are actually implemented with a hack that
uses multiple properties on the QOM level: a static "foo-len" property
and after it is set, dynamically created "foo[i]" properties.

In external interfaces (-device on the command line and device_add in
QMP), this interface was broken by commit f3558b1b ('qdev: Base object
creation on QDict rather than QemuOpts') because QDicts are unordered
and therefore it could happen that QEMU tried to set the indexed
properties before setting the length, which fails and effectively makes
array properties inaccessible. In particular, this affects the 'ports'
property of the 'rocker' device, which used to be configured like this:

-device rocker,len-ports=2,ports[0]=dev0,ports[1]=dev1

This patch reworks the external interface so that instead of using a
separate top-level property for the length and for each element, we use
a single true array property that accepts a list value. In the external
interfaces, this is naturally expressed as a JSON list and makes array
properties accessible again. The new syntax looks like this:

-device '{"driver":"rocker","ports":["dev0","dev1"]}'

Creating an array property on the command line without using JSON format
is currently not possible. This could be fixed by switching from
QemuOpts to a keyval parser, which however requires consideration of the
compatibility implications.

All internal users of devices with array properties go through
qdev_prop_set_array() at this point, so updating it takes care of all of
them.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090
Fixes: f3558b1b76
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231109174240.72376-12-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-10 18:19:19 +01:00
Kevin Wolf
3257b854d8 qdev: Make netdev properties work as list elements
The 'name' parameter of QOM setters is primarily used to specify the name
of the currently parsed input element in the visitor interface. For
top-level qdev properties, this is always set and matches 'prop->name'.

However, for list elements it is NULL, because each element of a list
doesn't have a separate name. Passing a non-NULL value runs into
assertion failures in the visitor code.

Therefore, using 'name' in error messages is not right for property
types that are used in lists, because "(null)" (or even a segfault)
isn't very helpful to identify what QEMU is complaining about.

Change netdev properties to use 'prop->name' instead, which will contain
the name of the array property after switching array properties to lists
in the external interface. (This is still not perfect, as it doesn't
identify which element in the list caused the error, but strictly better
than before.)

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231109174240.72376-11-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-10 18:19:15 +01:00
Kevin Wolf
125062e791 qom: Add object_property_set_default_list()
This function provides a default for properties that are accessed using
the list visitor interface. The default is always an empty list.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-10-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-10 18:19:14 +01:00
Kevin Wolf
670581f932 hw/rx/rx62n: Use qdev_prop_set_array()
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231109174240.72376-9-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-10 18:19:13 +01:00
Kevin Wolf
2394c782a9 hw/arm/xlnx-versal: Use qdev_prop_set_array()
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-8-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-10 18:19:13 +01:00
Kevin Wolf
3c86b9dadc hw/arm/virt: Use qdev_prop_set_array()
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-7-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-10 18:19:13 +01:00
Kevin Wolf
50ab8648c0 hw/arm/vexpress: Use qdev_prop_set_array()
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-6-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-10 18:19:13 +01:00
Kevin Wolf
d210fa2f05 hw/arm/sbsa-ref: Use qdev_prop_set_array()
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-5-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-10 18:19:13 +01:00
Kevin Wolf
80e09151c2 hw/arm/mps2: Use qdev_prop_set_array()
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-10 18:19:13 +01:00
Kevin Wolf
31805a0aa4 hw/arm/mps2-tz: Use qdev_prop_set_array()
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-10 18:19:13 +01:00
Kevin Wolf
33f0c06128 hw/i386/pc: Use qdev_prop_set_array()
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-2-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-11-10 18:19:07 +01:00
Stefan Hajnoczi
ea10c38178 Pull request
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmVMhGAACgkQnKSrs4Gr
 c8iBoQgAgWjGzp++3Iik0kdMObRlXVpTWwrlYohPg+5NanQB1LifYMt/2MTB70OA
 TUcMcZwzHCUSrtqp+IwU9m5YBZlk+NTQIUn3j5r6Rdv3TnHElBJgpiNWRqpQoDo6
 ZPqSymoyOh2pWtyKQtPQWhx1SsUeF5dEsbOy7fqZi7wLEUqBM1+9LV9C/Y6pIAa7
 KRSnbyNPviyV5B4qX1gaH17DKhj6QyRF/secv8TkKFlfr/6GelNySxEj9+9Om7qO
 R1NT09ZjjMXnNqA9cRzz00fP7bTP36WF065jkYc1oGAo9VwhWAfysju1qbSN2whe
 4CwucP9lSPuJ+g5tv+7nfX+JfY8+Gw==
 =jAvl
 -----END PGP SIGNATURE-----

Merge tag 'tracing-pull-request' of https://gitlab.com/stefanha/qemu into staging

Pull request

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmVMhGAACgkQnKSrs4Gr
# c8iBoQgAgWjGzp++3Iik0kdMObRlXVpTWwrlYohPg+5NanQB1LifYMt/2MTB70OA
# TUcMcZwzHCUSrtqp+IwU9m5YBZlk+NTQIUn3j5r6Rdv3TnHElBJgpiNWRqpQoDo6
# ZPqSymoyOh2pWtyKQtPQWhx1SsUeF5dEsbOy7fqZi7wLEUqBM1+9LV9C/Y6pIAa7
# KRSnbyNPviyV5B4qX1gaH17DKhj6QyRF/secv8TkKFlfr/6GelNySxEj9+9Om7qO
# R1NT09ZjjMXnNqA9cRzz00fP7bTP36WF065jkYc1oGAo9VwhWAfysju1qbSN2whe
# 4CwucP9lSPuJ+g5tv+7nfX+JfY8+Gw==
# =jAvl
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 09 Nov 2023 15:04:00 HKT
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [ultimate]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [ultimate]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* tag 'tracing-pull-request' of https://gitlab.com/stefanha/qemu:
  tracetool: avoid invalid escape in Python string

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-11-10 08:10:43 +08:00
Stefan Hajnoczi
1e16977fae xen-virtio-fix-1
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE0E4zq6UfZ7oH0wrqiU+PSHDhrpAFAmVKp0cACgkQiU+PSHDh
 rpA0Wg//RUJeBg/Ohjw/ETMjr7+zpsxm0JEjqE5uDYF9+wbX5uAcPOjYLpCbWdKY
 Q9nXmJCbnoqPYzjUrPpx0i8iiVnjbKY28sIqKzPDl4b2s8iPuGrjyPBbcZO1qvx9
 j3UOxiFqcIOIV/Ypf6rdo8hiIwZlHSYR3ZzWLFh2sFGmMee9TjDHiCwRXqZiIzE3
 ks39nV6+Ob1xVTLNZpHjSAsafd/SAusQv66OiGWPixM3DEMKCXUNWtFIfXd5tnVW
 P/4uyRFHzDH+hBZZx2NMiWalTNpcWb4LYhgv/zFiSlnUuw7g0fUBWM1qHWaLcTfY
 BEzm6578BVunFDJe5PEtc5bC1vSZarv6ndRKo7e/t5S/1bzyWzuI8nWCrUKscBSu
 ZgFeJyO9bLRae5QDIiDG6id2dafP9x4zIrn07enuMQVYkjQynA6oS49KL1I+RP38
 Cae+dfadqBksxDbFkh0t02tWjVNeR5MzmkcktlWEn8h136VzZ+fPn93TSTewPxsf
 3ii6dhiu8+P7A5tfXuRhqlgS8QgaJt6EXDkttjIsC5tWuBo28jZQKw77cZ4DWq1a
 eTy6hn9F0vX+8rNb1dq5Ct6BT6i2svmAloXKBvkaSPLwGLn2lKiUA3ky+9n0ZWEe
 GiyTwkvdaZndrjup+B3MbtQWmJhN+niJZveTJgCdG6or4tvGOuI=
 =1At5
 -----END PGP SIGNATURE-----

Merge tag 'xen-virtio-fix-1-tag' of https://gitlab.com/sstabellini/qemu into staging

xen-virtio-fix-1

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEE0E4zq6UfZ7oH0wrqiU+PSHDhrpAFAmVKp0cACgkQiU+PSHDh
# rpA0Wg//RUJeBg/Ohjw/ETMjr7+zpsxm0JEjqE5uDYF9+wbX5uAcPOjYLpCbWdKY
# Q9nXmJCbnoqPYzjUrPpx0i8iiVnjbKY28sIqKzPDl4b2s8iPuGrjyPBbcZO1qvx9
# j3UOxiFqcIOIV/Ypf6rdo8hiIwZlHSYR3ZzWLFh2sFGmMee9TjDHiCwRXqZiIzE3
# ks39nV6+Ob1xVTLNZpHjSAsafd/SAusQv66OiGWPixM3DEMKCXUNWtFIfXd5tnVW
# P/4uyRFHzDH+hBZZx2NMiWalTNpcWb4LYhgv/zFiSlnUuw7g0fUBWM1qHWaLcTfY
# BEzm6578BVunFDJe5PEtc5bC1vSZarv6ndRKo7e/t5S/1bzyWzuI8nWCrUKscBSu
# ZgFeJyO9bLRae5QDIiDG6id2dafP9x4zIrn07enuMQVYkjQynA6oS49KL1I+RP38
# Cae+dfadqBksxDbFkh0t02tWjVNeR5MzmkcktlWEn8h136VzZ+fPn93TSTewPxsf
# 3ii6dhiu8+P7A5tfXuRhqlgS8QgaJt6EXDkttjIsC5tWuBo28jZQKw77cZ4DWq1a
# eTy6hn9F0vX+8rNb1dq5Ct6BT6i2svmAloXKBvkaSPLwGLn2lKiUA3ky+9n0ZWEe
# GiyTwkvdaZndrjup+B3MbtQWmJhN+niJZveTJgCdG6or4tvGOuI=
# =1At5
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 08 Nov 2023 05:08:23 HKT
# gpg:                using RSA key D04E33ABA51F67BA07D30AEA894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <sstabellini@kernel.org>" [expired]
# gpg:                 aka "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" [expired]
# gpg: Note: This key has expired!
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3  0AEA 894F 8F48 70E1 AE90

* tag 'xen-virtio-fix-1-tag' of https://gitlab.com/sstabellini/qemu:
  Xen: Fix xen_set_irq() and xendevicemodel_set_irq_level()

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-11-10 08:09:29 +08:00