This is an easy quirk that really doesn't need a data structure if
its own. We can pass vdev as the opaque data and access to the
MemoryRegion isn't required.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Create a vendor:device ID helper that we'll also use as we rework the
rest of the quirks. Re-reading the config entries, even if we get
more blacklist entries, is trivial overhead and only incurred during
device setup. There's no need to typedef the blacklist structure,
it's a static private data type used once. The elements get bumped
up to uint32_t to avoid future maintenance issues if PCI_ANY_ID gets
used for a blacklist entry (avoiding an actual hardware match). Our
test loop is also crying out to be simplified as a for loop.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This allows vfio_msi* tracing. The MSI/X interrupt tracing is also
pulled out of #ifdef DEBUG_VFIO to avoid a recompile for tracing this
path. A few cycles to read the message is hardly anything if we're
already in QEMU.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Rename functions and tracing callbacks so that we can trace vfio_intx*
to see all the INTx related activities.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There's quite a bit of cleanup that can be done to the RTL8168 quirk,
as well as the tracing to prevent a spew of uninteresting accesses
for anything else the driver might choose to use the window registers
for besides the MSI-X table. There should be no functional change,
but it's now possible to get compact and useful traces by enabling
vfio_rtl8168_quirk*, ex:
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f000
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f000
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0xfee0100c
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f004
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f004
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x0
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f008
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f008
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x49b1
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f00c
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f00c
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x0
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6TWk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/vnc-crypto-v9-for-upstream' into staging
Merge vnc-crypto-v9
# gpg: Signature made Tue 15 Sep 2015 15:32:38 BST using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
* remotes/berrange/tags/vnc-crypto-v9-for-upstream:
ui: convert VNC server to use QCryptoTLSSession
ui: fix return type for VNC I/O functions to be ssize_t
crypto: introduce new module for handling TLS sessions
crypto: add sanity checking of TLS x509 credentials
crypto: introduce new module for TLS x509 credentials
crypto: introduce new module for TLS anonymous credentials
crypto: introduce new base module for TLS credentials
qom: allow QOM to be linked into tools binaries
crypto: move crypto objects out of libqemuutil.la
tests: remove repetition in unit test object deps
qapi: allow override of default enum prefix naming
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a QCryptoTLSSession object that will encapsulate
all the code for setting up and using a client/sever TLS
session. This isolates the code which depends on the gnutls
library, avoiding #ifdefs in the rest of the codebase, as
well as facilitating any possible future port to other TLS
libraries, if desired. It makes use of the previously
defined QCryptoTLSCreds object to access credentials to
use with the session. It also includes further unit tests
to validate the correctness of the TLS session handshake
and certificate validation. This is functionally equivalent
to the current TLS session handling code embedded in the
VNC server, and will obsolete it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the administrator incorrectly sets up their x509 certificates,
the errors seen at runtime during connection attempts are very
obscure and difficult to diagnose. This has been a particular
problem for people using openssl to generate their certificates
instead of the gnutls certtool, because the openssl tools don't
turn on the various x509 extensions that gnutls expects to be
present by default.
This change thus adds support in the TLS credentials object to
sanity check the certificates when QEMU first loads them. This
gives the administrator immediate feedback for the majority of
common configuration mistakes, reducing the pain involved in
setting up TLS. The code is derived from equivalent code that
has been part of libvirt's TLS support and has been seen to be
valuable in assisting admins.
It is possible to disable the sanity checking, however, via
the new 'sanity-check' property on the tls-creds object type,
with a value of 'no'.
Unit tests are included in this change to verify the correctness
of the sanity checking code in all the key scenarios it is
intended to cope with. As part of the test suite, the pkix_asn1_tab.c
from gnutls is imported. This file is intentionally copied from the
(long since obsolete) gnutls 1.6.3 source tree, since that version
was still under GPLv2+, rather than the GPLv3+ of gnutls >= 2.0.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a QCryptoTLSCredsX509 class which is used to
manage x509 certificate TLS credentials. This will be
the preferred credential type offering strong security
characteristics
Example CLI configuration:
$QEMU -object tls-creds-x509,id=tls0,endpoint=server,\
dir=/path/to/creds/dir,verify-peer=yes
The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use
$QEMU -object tls-creds-x509,id=tls0,.... \
-vnc 127.0.0.1:1,tls-creds=tls0
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce a QCryptoTLSCredsAnon class which is used to
manage anonymous TLS credentials. Use of this class is
generally discouraged since it does not offer strong
security, but it is required for backwards compatibility
with the current VNC server implementation.
Simple example CLI configuration:
$QEMU -object tls-creds-anon,id=tls0,endpoint=server
Example using pre-created diffie-hellman parameters
$QEMU -object tls-creds-anon,id=tls0,endpoint=server,\
dir=/path/to/creds/dir
The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use
$QEMU -object tls-creds-anon,id=tls0,.... \
-vnc 127.0.0.1:1,tls-creds=tls0
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce a QCryptoTLSCreds class to act as the base class for
storing TLS credentials. This will be later subclassed to provide
handling of anonymous and x509 credential types. The subclasses
will be user creatable objects, so instances can be created &
deleted via 'object-add' and 'object-del' QMP commands respectively,
or via the -object command line arg.
If the credentials cannot be initialized an error will be reported
as a QMP reply, or on stderr respectively.
The idea is to make it possible to represent and manage TLS
credentials independently of the network service that is using
them. This will enable multiple services to use the same set of
credentials and minimize code duplication. A later patch will
convert the current VNC server TLS code over to use this object.
The representation of credentials will be functionally equivalent
to that currently implemented in the VNC server with one exception.
The new code has the ability to (optionally) load a pre-generated
set of diffie-hellman parameters, if the file dh-params.pem exists,
whereas the current VNC server will always generate them on startup.
This is beneficial for admins who wish to avoid the (small) time
sink of generating DH parameters at startup and/or avoid depleting
entropy.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a reason to grab calls and trace points,
so it is easier to debug grab related ui issues.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=7+ii
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-2015-09-10-tag' into staging
xen-2015-09-10
# gpg: Signature made Thu 10 Sep 2015 17:52:08 BST using RSA key ID 70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
* remotes/sstabellini/tags/xen-2015-09-10-tag: (29 commits)
xen/pt: Don't slurp wholesale the PCI configuration registers
xen/pt: Check for return values for xen_host_pci_[get|set] in init
xen/pt: Move bulk of xen_pt_unregister_device in its own routine.
xen/pt: Make xen_pt_unregister_device idempotent
xen/pt: Log xen_host_pci_get/set errors in MSI code.
xen/pt: Log xen_host_pci_get in two init functions
xen/pt: Remove XenPTReg->data field.
xen/pt: Check if reg->init function sets the 'data' past the reg->size
xen/pt: Sync up the dev.config and data values.
xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config
xen/pt: Use XEN_PT_LOG properly to guard against compiler warnings.
xen/pt/msi: Add the register value when printing logging and error messages
xen: use errno instead of rc for xc_domain_add_to_physmap
xen/pt: xen_host_pci_config_read returns -errno, not -1 on failure
xen/pt: Make xen_pt_msi_set_enable static
xen/pt: Update comments with proper function name.
xen/HVM: atomically access pointers in bufioreq handling
xen-hvm: When using xc_domain_add_to_physmap also include errno when reporting
xen, gfx passthrough: add opregion mapping
xen, gfx passthrough: register host bridge specific to passthrough
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current trace prototypes and (matching) trace calls lead to
"unorthodox" PCI BDF notation in at least the stderr trace backend. For
example, the four BARs of a QXL video card at 00:01.0 (bus 0, slot 1,
function 0) are traced like this (PID and timestamps removed):
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 0,0x84000000+0x4000000
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 1,0x80000000+0x4000000
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 2,0x88200000+0x2000
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 3,0xd060+0x20
The slot and function values are in reverse order.
Stick with the conventional BDF notation.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Don Koch <dkoch@verizon.com>
Cc: qemu-trivial@nongnu.org
Fixes: 7828d75045
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
s390 guest initialization is modified to make use of new s390-storage-keys
device. Old code that globally allocated storage key array is removed.
The new device enables storage key access for kvm guests.
Cache storage key QOM objects in frequently used helper functions to avoid a
performance hit every time we use one of these functions.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If mirror has more free buffers than IOV_MAX, preadv(2)/pwritev(2)
EINVAL failures may be encountered.
It is possible to trigger this by setting granularity to a low value
like 8192.
This patch stops appending chunks once IOV_MAX is reached.
The spurious EINVAL failure can be reproduced with a qcow2 image file
and the following QMP invocation:
qmp.command('drive-mirror', device='virtio0', target='/tmp/r7.s1',
granularity=8192, sync='full', mode='absolute-paths',
format='raw')
While the guest is running dd if=/dev/zero of=/var/tmp/foo oflag=direct
bs=4k.
Cc: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1435761950-26714-1-git-send-email-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Drop .can_receive and move the semantics into minimac2_rx, by returning
0.
That is once minimac2_rx returns 0, incoming packets will be queued
until the queue is explicitly flushed. We do this when s->regs[R_STATE0]
or s->regs[R_STATE1] is changed in minimac2_write.
Also drop the unused trace point.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1436955553-22791-9-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
To make sections optional, we need to do it at the beggining of the code.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This includes a new section that for now just stores the current qemu state.
Right now, there are only one way to control what is the state of the
target after migration.
- If you run the target qemu with -S, it would start stopped.
- If you run the target qemu without -S, it would run just after migration finishes.
The problem here is what happens if we start the target without -S and
there happens one error during migration that puts current state as
-EIO. Migration would ends (notice that the error happend doing block
IO, network IO, i.e. nothing related with migration), and when
migration finish, we would just "continue" running on destination,
probably hanging the guest/corruption data, whatever.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use the order of incoming RAMBlocks from the source to record
an index number; that then allows us to sort the destination
local RAMBlock list to match the source.
Now that the RAMBlocks are known to be in the same order, this
simplifies the RDMA Registration step which previously tried to
match RAMBlocks based on offset (which isn't guaranteed to match).
Looking at the existing compress code, I think it was erroneously
relying on an assumption of matching ordering, which this fixes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In the next patch we remove the hash on the destination,
rdma_delete_block does two things with the hash which can be avoided:
a) The caller passes the offset and rdma_delete_block looks it up
in the hash; fixed by getting the caller to pass the block
b) The hash gets recreated after deletion; fixed by making that
conditional on the hash being initialised.
While this function is currently only used during cleanup, Michael
asked that we keep it general for future dynamic block registration
work.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We need the names of RAMBlocks as they're loaded for RDMA,
reuse a slightly modified ram_control_load_hook:
a) Pass a 'data' parameter to use for the name in the block-reg
case
b) Only some hook types now require the presence of a hook function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In a later patch the block name will be used to match up two views
of the block list. Keep a copy of the block name with the local block
list.
(At some point it could be argued that it would be best just to let
migration see the innards of RAMBlock and avoid the need to use
foreach).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch aims at optimizing IRQ handling using irqfd framework.
Instead of handling the eventfds on user-side they are handled on
kernel side using
- the KVM irqfd framework,
- the VFIO driver virqfd framework.
the virtual IRQ completion is trapped at interrupt controller
This removes the need for fast/slow path swap.
Overall this brings significant performance improvements.
Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Changes:
* improve dp8393x network card and rc4030 chipset emulation
* support misaligned R6 and MSA memory accesses
* support MIPS eXtended and Large Physical Addressing
* add Config5.FRE bit and ERETNC instruction (Config5.LLB)
* support ememsize on MALTA
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJVeppzAAoJEFIRjjwLKdprnk8H/1owSOreh0sMFbosvqlEhjXl
lvjjuprWMdX+8M1JlaDvTbw6+LDB3Rihp3A6/I9A0GFiZaORmPzg7efULAI1H6ST
0HfxMAO17eW+PJ3lvk0HidNDr01+RzTvwpizrHgQ9WJubJv0xREU+YG5yn1gPS4N
aMMTKCAQFDba7iQQLKXUYvLz76+xyzW4VIvHVLx/SU86yPg9T7CwLpppipR8+zY5
3BC4NUw/xLlS0LCYQGM8XmYgBiQ6lEAz/Y29bGlUg+LeYysjSgNSeoNbOs1M3kQp
X0Hn7b28I1CjM2wZQ9GkT/ig+jhMvw27motnAe8vKood4ytfcor+dCCS13sE8fg=
=F564
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/lalrae/tags/mips-20150612' into staging
MIPS patches 2015-06-12
Changes:
* improve dp8393x network card and rc4030 chipset emulation
* support misaligned R6 and MSA memory accesses
* support MIPS eXtended and Large Physical Addressing
* add Config5.FRE bit and ERETNC instruction (Config5.LLB)
* support ememsize on MALTA
# gpg: Signature made Fri Jun 12 09:38:11 2015 BST using RSA key ID 0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8DD3 2F98 5495 9D66 35D4 4FC0 5211 8E3C 0B29 DA6B
* remotes/lalrae/tags/mips-20150612: (29 commits)
target-mips: enable XPA and LPA features
target-mips: remove misleading comments in translate_init.c
target-mips: add MTHC0 and MFHC0 instructions
target-mips: add CP0.PageGrain.ELPA support
target-mips: support Page Frame Number Extension field
target-mips: extend selected CP0 registers to 64-bits in MIPS32
target-mips: correct MFC0 for CP0.EntryLo in MIPS64
net/dp8393x: fix hardware reset
net/dp8393x: correctly reset in_use field
net/dp8393x: add load/save support
net/dp8393x: add PROM to store MAC address
net/dp8393x: QOM'ify
net/dp8393x: use dp8393x_ prefix for all functions
net/dp8393x: do not use old_mmio accesses
net/dp8393x: always calculate proper checksums
dma/rc4030: convert to QOM
dma/rc4030: use trace events instead of custom logging
dma/rc4030: document register at offset 0x210
dma/rc4030: do not use old_mmio accesses
dma/rc4030: use AddressSpace and address_space_rw in users
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split qemu_savevm_state_begin to:
qemu_savevm_state_header That writes the initial file header.
qemu_savevm_state_begin That sets up devices and does the first
device pass.
Used later in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
For historic reasons, ram migration have been on arch_init.c. Just
split it into migration/ram.c, the same that happened with block.c.
There is only code movement, no changes altogether.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch adds the core code for virtio gpu emulation,
covering 2d support.
Written by Dave Airlie and Gerd Hoffmann.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Exit with an error (instead of simply logging a trace event)
whenever the same fw_cfg file name is added multiple times via
one of the fw_cfg_add_file[_callback]() host-side API calls.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
From this point forward, any guest-side writes to the fw_cfg
data register will be treated as no-ops. This patch also removes
the unused host-side API function fw_cfg_add_callback(), which
allowed the registration of a callback to be executed each time
the guest completed a full overwrite of a given fw_cfg data item.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds the code requested to assign interrupts to
a guest. The interrupts are mediated through user handled
eventfds only.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Minimal VFIO platform implementation supporting register space
user mapping but not IRQ assignment.
Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is to reduce VIO noise while debugging PCI DMA.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce a preliminary framework in virt-acpi-build.c with the main
ACPI build functions. It exposes the generated ACPI contents to
guest over fw_cfg.
The required ACPI v5.1 tables for ARM are:
- RSDP: Initial table that points to XSDT
- RSDT: Points to FADT GTDT MADT tables
- FADT: Generic information about the machine
- GTDT: Generic timer description table
- MADT: Multiple APIC description table
- DSDT: Holds all information about system devices/peripherals, pointed by FADT
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1432522520-8068-5-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When memory hot unplug fails, this patch adds support to send
QMP event to notify mgmt about this failure.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- implements QEMU hardware part of memory hot unplug protocol
described at "docs/spec/acpi_mem_hotplug.txt"
- handles memory remove notification event
- handles device eject notification
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds tracing code for all SIGP orders (including the destination
vcpu and the resulting condition code).
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-6-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
* remotes/qmp-unstable/queue/qmp:
docs: add memory-hotplug.txt
qemu-options.hx: improve -m description
virtio-balloon: Add some trace events
virtio-balloon: Fix balloon not working correctly when hotplug memory
pc-dimm: add a function to calculate VM's current RAM size
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It looks like the dtrace trace code gets upset if you have trace names
with __ in, which the migration/rdma.c code does.
Rename the functions and the associated traces.
Fixes: 733252deb8
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1424105885-12149-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add trace calls. Convert some #ifdef DEBUG printfs to trace.
Signed-off-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
