There would be too many extents that VMDK driver can't open all of them:
005 0s ... - output mismatch (see 005.out.bad)
--- 005.out 2013-12-24 09:27:27.608181030 +0800
+++ 005.out.bad 2014-02-13 10:00:15.282184557 +0800
@@ -4,10 +4,10 @@
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=5368709120000
small read
-read 4096/4096 bytes at offset 1024
-4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+qemu-io: can't open device /tmp/qemu-iotests/t.vmdk: Could not open '/tmp/qemu-iotests/t-s1016.vmdk': Too many open files
+no file open, try 'help open'
small write
-wrote 4096/4096 bytes at offset 8192
-4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+qemu-io: can't open device /tmp/qemu-iotests/t.vmdk: Could not open '/tmp/qemu-iotests/t-s1016.vmdk': Too many open files
+no file open, try 'help open'
*** done
So disable the two subformats.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VHDX logs can now be replayed via 'qemu-img check -r all'. Add
tests to verify that the log replay is successful when using qemu-img.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VHDX test 070 failed, due to different output from qemu-io / qemu
when opening an image read-only that contains a log file. Filter
the output, and update the expected results to match the correct
output.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Note that this will emit a warning:
[vmxnet3][WR][vmxnet3_peer_has_vnet_hdr]: Peer has no virtio extension.
Task offloads will be emulated.
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Rather than requiring every new architecture to remember to add a line
to the Makefile to say that qom-test will work on it, autogenerate
the list of supported architectures by looking at the files in
default-configs (as configure does), and add qom-test to the
test list for all of them automatically.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Get available machines via QMP instead of hardcoding a list that's
perpetually out of date.
Xen machines can work only when running under the Xen hypervisor.
Blacklist them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 49ab747f66 moved
fdc.c, hd-geometry.c, m48t59.c, tmp105.c into hw/ subdirectories;
commit 0ddfaf7fe4 did for mc146818rtc.c.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Not only 44x CPUs (BookE) but also 40x CPUs can run with 1k page size.
Move the criteria to a central inline function to avoid repetition
and #ifdef'fery. Update qom-test to no longer exempt them.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Most changes here are hotplug related:
This merges hotplug infrastructure changes by Igor,
some acpi related fixes, and PC fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJS+Jg2AAoJECgfDbjSjVRp2hIH/3PezOqYAJlp1LzHPYgTII5R
ZWdlHWJODB5QKGuDnJ0rKTZn+9n4f27Q7ynwqrodrLNtzglfmPUwtjTb52vbd1yh
qJ7BtvGIewUEjTPVs2feipb75jFZFhvIU46F1jPJAiaNKG0nl6zwVHn5XfFqesv2
4TlHAoqYvpUUuFcG7Qu+hREUrjb/tdxwP8EYM4qDPOSxguS2R2+3/17BVlPDQGia
bKl6j5EmnmmbQ0h8Sepy3YKh9d1rZnKFsolMFrL8ITjzEzzyKjpE284GNe/5eY25
HR25dY5eYTb0d3QPeH2O5sOrZgOFpTZc8WOo9Kxi0OTjWxFoZstZ1AOM3A2DAoY=
=EtLZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,pci fixes and enhancements
Most changes here are hotplug related:
This merges hotplug infrastructure changes by Igor,
some acpi related fixes, and PC fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 10 Feb 2014 09:13:26 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
ACPI: Remove commented-out code from HPET._CRS
hw/pci: switch to a generic hotplug handling for PCIDevice
pci/pcie: convert PCIE hotplug to use hotplug-handler API
pci/shpc: convert SHPC hotplug to use hotplug-handler API
acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler API
qdev:pci: refactor PCIDevice to use generic "hotpluggable" property
hw/acpi: move typeinfo to the file end
qdev: add "hotpluggable" property to Device
qdev: add to BusState "hotplug-handler" link
define hotplug interface
loader: document that errno is set
pc.c: better error message on initrd sizing failure
pc_piix: enable legacy hotplug for Xen
qtest: don't report signals if qtest driver enabled
hw:piix4:acpi: reuse pcihp code for legacy PCI hotplug
pcihp: remove unused AcpiPciHpPciStatus.device_present field
pcihp: make pci_read() mmio calback compatible with legacy ACPI hotplug
pcihp: make PCI hotplug mmio handlers indifferent to PCI_HOTPLUG_ADDR
pcihp: replace enable|disable_device() with oneliners
pcihp: reduce number of device check events
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
make qdev_unplug()/device_set_realized() to call hotplug handler's
plug/unplug methods if available and remove not needed anymore
hot(un)plug handling from PCIDevice.
In case if hotplug handler is not available, revert to the legacy
hotplug method for compatibility with not yet converted buses.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This fixes a regression introduced in commit 2a05cbe42 ('block: Allow
block devices without files'):
$ qemu-system-x86_64 -drive driver=file
qemu-system-x86_64: block.c:892: bdrv_open_common: Assertion
`!drv->bdrv_needs_filename || filename != ((void *)0)' failed.
Now the respective check must be performed not only in bdrv_file_open(),
but also in bdrv_open().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
all these tests do anything of the following and thus fail with any
protocol other than file:
- the tests use rm, cp or mv shell commands which only work on file
- the tests use qcow2.py
- the images construct new filenames (e.g. backing file names) and
the logic is broken for anything else than file
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qemu-io command sequences make the assumption that an unaligned
request on the format layer will be unaligned on the blkdebug layer as
well. This doesn't necessarily hold true for drivers other than raw.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoît Canet <benoit@irqsave.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iEYEABECAAYFAlLxNdwACgkQEdFA3D+Yo3h0MQCgkqd4o4LdamOYxQqP0CgD+ET8
QFgAn19l7zj69bPiYEsl1kPxinIduZnd
=ff/s
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mwalle/tags/lm32-fixes/20140204' into staging
target-lm32: fixes
# gpg: Signature made Tue 04 Feb 2014 18:47:56 GMT using DSA key ID 3F98A378
# gpg: Can't check signature: public key not found
* remotes/mwalle/tags/lm32-fixes/20140204:
hw/lm32: print error if cpu model is not found
target-lm32: stop VM on illegal or unknown instruction
lm32_sys: dump cpu state if test case fails
lm32_sys: print test result on stderr
target-lm32: add breakpoint/watchpoint support
target-lm32: move model features to LM32CPU
target-lm32: kill cpu_abort() calls
milkymist-vgafb: swap pixel data in source buffer
lm32_uart/lm32_juart: use qemu_chr_fe_write_all()
milkymist-uart: use qemu_chr_fe_write_all() instead of qemu_chr_fe_write()
tests: lm32: new rule for single test cases
lm32_sys: increase test case name length limit
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce new target "check_%" to run individual test caes, eg.
make check_mmu
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
UNIX domain sockets are leaked when tests call abort(3) (indirectly via
glib assert functions).
Unlink the files immediately after the connection has been established
to avoid leaks.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After starting the QEMU process and initializing the QMP connection, we
can read the pid file and unlink it.
Just stash away the pid instead of the pid filename. This way we can
avoid pid file leaks since running tests may abort(3) without cleanup.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 071 test is designed for IMGFMT=qcow2 because it uses the l2_load
blkdebug event. Its output filtering also assumes that IMGFMT is not
raw since 071.out contains "format=raw" but IMGFMT=raw would filter the
output to "format=IMGFMT".
Perhaps the test case can be rewritten to be more generic, but for now
let's document that it was only supposed to work with qcow2.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
It is exactly assert_no_active_block_jobs in iotests.py
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The asl comparison will break every time the ACPI
tables are updated. This may break the git bisect.
Instead of failing print a warning on stderr
including the retained asl files, so they can be
compared offline.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It seems that iasl has an issue when disassembles
some ACPI tables using the command line:
iasl -e DSDT -e SSDT -d HPET
Modified the iasl command line to "iasl -d HPET"
until the problem is solved. The command line
remained the same for DSDT and SSDT tables.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Just a refactoring, ssdt_tables name was confusing as
it included other tables as well.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Double endianness convertion make this test failing on POWERPC machine
running in big-endian.
This fixes the test to success on big-endian host.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When running the test with TEST_ACPI_REBUILD_AML=y environment
variable, the test will rebuild and validate the expected aml
files.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acpi unit-test will fail every time the acpi tables change.
This script rebuild the expected aml files, so the test
will pass. It also validates the modifications.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The test checked if iasl is installed by running "iasl"
and checking the error output.
It is better to use the iasl executable as appears
in configuration.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This test will run only if iasl is installed on the host machine.
The test plan:
1. Dumps the ACPI tables as AML on the disk.
2. Runs iasl to disassembly the tables into ASL files.
3. Runs iasl to disassembly the offline AML files into ASL files.
4. Compares the ASL files.
The test runs for both default machine and q35.
In case the test fails, it can be easily tweaked to
show the differences between the ASL files and
understand the issue.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Added unit-test's expected aml files to be compared
with the actual ACPI tables.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a test for the new blkdebug/blkverify interface.
This test is not written in Python, although it uses QMP. This is
because it invokes the qemu-io HMP command, which outputs errors to
stderr instead of returning them through QMP. Filtering and testing that
output is easier in a shell script than with the Python infrastructure.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test case for qdict_flatten() in tests/check-qdict.c. This test
case covers the flattening of subordinate QLists as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test case for qdict_array_split() in tests/check-qdict.c.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It should be possible to use a format as a driver for a file which in
turn requires another file, i.e., nesting file formats.
Allowing nested file formats results in e.g. qcow2 BlockDriverStates
never being directly passed to bdrv_open_common() from bdrv_file_open(),
but instead being handed through bdrv_open(). This changes the error
message when trying to give a filename to qcow2, i.e. trying to use it
as a driver for the protocol level. Therefore, change the reference
output of I/O test 051 accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Local variable "n" as int64_t avoids overflow with large sector number
calculation. See test case change for failure case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When we disable vnc from "./configure", QEMU can't use the vnc option.
So qtest can't use the "vnc -none ", otherwise "make check" fails.
If QEMU uses "-display none", "-vnc none" is excrescent, So we just need to drop it.
Signed-off-by: Kewei Yu <keweihk@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This modifies _cleanup_test_img to remove all the extent files listed by
"qemu-img info"'s format specific information.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some cases are not applicable for vmdk subformats those don't support
certain features, e.g. backing file, and some others can't run on
mult-file image, e.g. monolithicFlat. This adds declaration in test
cases to skip them automatically, so that iotests on vmdk can go
more smoothly (without manually picking of cases for each subformat).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce _unsupported_imgopts that causes _notrun for specific image
options.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The recent addition of util/error.c's dependency on error_report()
causes this test to fail to link due to a number of missing monitor
related symbols. All these symbols are however defined by libqemustub.
Add this libary to the link.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
* stefanha/block:
commit: Remove unused check
qemu-iotests: Update test cases for commit active
commit: Support commit active layer
block: Add commit_active_start()
mirror: Move base to MirrorBlockJob
mirror: Don't close target
qemu-iotests: drop duplicate virtio-blk initialization failure
vmdk: Allow vmdk_create to work with protocol
vmdk: Check VMFS extent line field number
docs: updated qemu-img man page and qemu-doc to reflect VHDX support.
block: vhdx - improve error message, and .bdrv_check implementation
block/iscsi: Fix compilation for libiscsi 1.4.0 (API change)
qapi-schema: fix QEMU 1.8 references
dataplane: replace hostmem with memory_region_find
dataplane: change vring API to use VirtQueueElement
vring: factor common code for error exits
vring: create a common function to parse descriptors
sheepdog: fix dynamic grow for running qcow2 format
Message-id: 1387554416-5837-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This includes some Preparatory patches for cpu hotplug for q25 and memory
hotplug by Igor, tests and memory mapping change
by Laszlo and pci reset cleanup by Paolo.
There are also some fixes for fedora and virtio:
included here since they are test blockers for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSuF+2AAoJECgfDbjSjVRpTz0IAJhNCC8L2GVt+pm1RAt6lbqZ
u9bCrqfThDORN2mUTEuLu4ZpZC0DYc7d0Jjr5NPesC5G/Afzi5/to6+l7nNZneU3
OdBPglXCCfU/cRaLu7JG2akpha0GVU0tsSCoWIYa6mwlWA4/DXVMgeKg/bh/EgfM
B1w4fE2RgRM9bEqWmX4+tZw8dgk7uVJhu95HCDnb5eikaKlFzwuOlvexrDV3KbPc
bkJe35zbGrKOws93tiSeoqcDx2dcYSzecPoJ0jiCY0KXJ17PBWAvuLTtYqkwwe9J
2FEnTslQJ3Rc8jTFiOPWx2pGaejG4y7Tnk6uuzW6fbbSLOQDPJy3KgmutJFMt1A=
=ShCj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
acpi,pci,pc,fedora,virtio fixes and enhancements
This includes some Preparatory patches for cpu hotplug for q25 and memory
hotplug by Igor, tests and memory mapping change
by Laszlo and pci reset cleanup by Paolo.
There are also some fixes for fedora and virtio:
included here since they are test blockers for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 23 Dec 2013 08:07:18 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony:
target-arm: fix build with gcc 4.8.2
virtio: add back call to virtio_bus_device_unplugged
piix: fix 32bit pci hole
qdev: switch reset to post-order
qdev: allow both pre- and post-order vists in qdev walking functions
pci: clean up resetting of IRQs
pci: do not export pci_bus_reset
ACPI/DSDT-CPU: cleanup bogus comment
ACPI: Q35 DSDT: fix CPU hotplug GPE0.2 handler
acpi: ich9: allow guest to clear SCI rised by GPE
acpi: factor out common pm_update_sci() into acpi core
acpi: piix4: remove not needed GPE0 mask
i440fx-test: verify firmware under 4G and 1M, both -bios and -pflash
i440fx-test: generate temporary firmware blob
i440fx-test: give each GTest case its own qtest
i440fx-test: qtest_start() should be paired with qtest_end()
hw/i386/pc_sysfw: support two flash drives
pc_piix: document gigabyte_align
piix: gigabyte alignment for ram
Message-id: 1387815007-1272-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
* QOM interface fixes and unit test
* Device no_user sanitization and documentation
* Device error reporting improvement
* Conversion of APIC, ICC, IOAPIC to QOM realization model
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=WrhM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'afaerber/tags/qom-devices-for-anthony' into staging
QOM infrastructure fixes and device conversions
* QOM interface fixes and unit test
* Device no_user sanitization and documentation
* Device error reporting improvement
* Conversion of APIC, ICC, IOAPIC to QOM realization model
# gpg: Signature made Tue 24 Dec 2013 09:04:05 AM PST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 174F 0347 1BCC 221A 6175 6F96 FA2E D12D 3E7E 013F
* afaerber/tags/qom-devices-for-anthony: (24 commits)
qdev-monitor: Improve error message for -device nonexistant
ioapic: QOM'ify ioapic
ioapic: Cleanup for QOM'ification
icc_bus: QOM'ify ICC
apic: QOM'ify APIC
apic: Cleanup for QOM'ification
qdev: Drop misleading qbus_free() function
qom: Detect bad reentrance during object_class_foreach()
tests: Test QOM interface casting
qom: Do not register interface "types" in the type table and fix names
qom: Split out object and class caches
qdev: Document that pointer properties kill device_add
hw: cannot_instantiate_with_device_add_yet due to pointer props
qdev-monitor: Avoid device_add crashing on non-device driver name
qdev: Do not let the user try to device_add when it cannot work
isa: Clean up use of cannot_instantiate_with_device_add_yet
vt82c686: Clean up use of cannot_instantiate_with_device_add_yet
piix3 piix4: Clean up use of cannot_instantiate_with_device_add_yet
ich9: Document why cannot_instantiate_with_device_add_yet
pci-host: Consistently set cannot_instantiate_with_device_add_yet
...
Add basic regression testing for QOM Interface usage.
Test checks casting to interface type/class for following cases:
- interface implementation in leaf class
- interface implementation in intermediate (parent) class
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Check whether the firmware is not hidden by other memory regions.
Qemu is started in paused mode: it shouldn't try to interpret generated
garbage.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The blob is 64K in size and contains 0x00..0xFF repeatedly.
The client code added to main() wouldn't make much sense in the long term.
It helps with debugging and it silences gcc about create_blob_file() being
unused, and we'll replace it in the next patch anyway.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current two GTest cases, /i440fx/defaults and /i440fx/pam can share a
qemu process, but the next two cases will need dedicated instances. It is
messy (and order-dependent) to dynamically configure GTest cases one by
one to start, stop, or keep the current qtest (*); let's just have each
GTest work with its own qtest. The performance difference should be
negligible.
(*) As g_test_run() can be invoked at most once per process startup, and
it runs GTest cases in sequence, we'd need clumsy data structures to
control each GTest case to start/stop/keep the qemu instance. Or, we'd
have to code the same information into the test methods themselves, which
would make them even more order-dependent.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similarly to commit 1d9358e6
("libqtest: New qtest_end() to go with qtest_start()").
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Factor out commit test common logic into super class, and update test
of committing the active image.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 75884afd5c ("virtio-blk: Convert to
QOM realize") dropped a duplicate error_report() call. Now we no longer
get the following error message twice:
QEMU_PROG: -drive if=virtio: Device initialization failed.
Update qemu-iotests 051.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VMFS extent line in description file should be with 4 fields:
RW <size> VMFS "file-name.vmdk"
Check the number explicitly and report error if offset is appended as
FLAT, which should be invalid format.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Also this patch adds initial support for Canon
PowerShot A1100 IS compact camera.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Message-id: 1387188908-754-3-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ensure more then one instance of test_data may exist
at a given time. It will help to compare different
acpi table versions.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
FACS table does not have a checksum, so we can
check at least the signature (existence).
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Read all ACPI tables from guest - will be useful for further unit tests.
Follow pointers between ACPI tables checking signature and format for
correctness. Verify checksum for all tables.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We run bios, and boot a minimal boot sector that immediately halts.
Then poke at memory to find ACPI tables.
This only checks that RSDP is there.
More will be added later.
Cc: Andreas Färber <afaerber@suse.de>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SMTP does not preserve newlines. This is normally not a problem if the
email body uses DOS or UNIX newlines consistently. In 051.out we mix
UNIX newlines with DOS newlines (since QEMU monitor output uses \r\n).
This patch filters the QEMU monitor output so the golden master file
uses UNIX newlines exclusively.
The result is that patches touching 051.out will apply cleanly without
mangling newlines after this commit.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch drops a special case where aio_poll(ctx, true) returns false
instead of blocking if no file descriptors are waiting on I/O. Now it
is possible to block in aio_poll() to wait for aio_notify().
This change eliminates busy waiting. bdrv_drain_all() used to rely on
busy waiting to completed throttled I/O requests but this is no longer
required so we can simplify aio_poll().
Note that aio_poll() still returns false when aio_notify() was used. In
other words, stopping a blocking aio_poll() wait is not considered
making progress.
Adjust test-aio /aio/bh/callback-delete/one which assumed aio_poll(ctx,
true) would immediately return false instead of blocking.
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This case can't run when IMGPROTO=nbd, since it needs to create some
internal snapshot which would fail for EOF write request, even when
TEST_IMG is exported with "-f raw" in common.rc, so set _supported_proto
to file.
_require_command() is changed to tip what util is missing, instead
of printing a blank.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Format "raw" doesn't always work on certain file systems (e.g. tmpfs).
Use qcow2 to make the allocation status explicit and split into a new
case.
[Resolved merge conflict due to "qemu-io> " prompt filter, added 074 to
group file, and fixed up s/048/074/ copy-paste mistake.
--Stefan]
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
So that the tests can run faster.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This replaces _unsupported_qemu_io_options and check for support of
current cache mode, and allow to provide a default if user didn't
specify.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will allow overriding cache mode from the "-c mode" option.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The option sets cache mode used in the tests. "-nocache" is changed to
an alias to "-c none", and internally passes "-t none" to qemu-io.
Python scripts will make use of option this in the next commit.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The buffer for description file was 4096 which only covers a few
hundred of extents. This changes the buffer to dynamic allocated with
g_strdup_printf in order to support bigger cases.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This removes "qemu-io> " prompt from qemu-io output in _filter_qemu_io,
and updates all the output files with the following command:
cd tests/qemu-iotests && sed -i "s/qemu-io> //g" *.out
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pause the drive and start the block job, so we won't miss the block job.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
They wrap blkdebug "break" and "remove_break".
Add optional argument "resume" to cancel_and_wait().
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds a test for coroutine execution order in test-coroutine -
this catches a bug in the CPC coroutine implementation.
Signed-off-by: Charlie Shepherd <charlie@ctshepherd.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Performing multiple drive-mirror blockjobs on the same qemu instance
results in the image file used for the block device being replaced by
the newly mirrored file, which is not what we want.
Fix this by performing one dedicated test per sync mode.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1385407736-13941-3-git-send-email-mreitz@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
