Also added qemu_logfile_init() for initializing the logfile mutex.
Note that inside qemu_set_log() we needed to add a pair of
qemu_mutex_unlock() calls in order to avoid a double lock in
qemu_log_close(). This unavoidable temporary ugliness will be
cleaned up in a later patch in this series.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-4-robert.foley@linaro.org>
Also added some explanation of the reasoning behind the branches.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-3-robert.foley@linaro.org>
After freeing the logfilename, we set logfilename to NULL, in case of an
error which returns without setting logfilename.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-2-robert.foley@linaro.org>
Most developers are using out-of-tree builds and it was discussed in the past
to only allow those. To prepare for the transition, use out-of-tree builds
in all continuous integration jobs.
Based on a patch by Marc-André Lureau.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Li-Wen Hsu <lwhsu@freebsd.org>
Message-Id: <1576074829-56711-1-git-send-email-pbonzini@redhat.com>
Travis recently added the possibility to test on these architectures,
too, so let's enable them in our travis.yml file to extend our test
coverage.
Unfortunately, the libssh in this Ubuntu version (bionic) is in a pretty
unusable Frankenstein state and libspice-server-dev is not available here,
so we can not use the global list of packages to install, but have to
provide individual package lists instead.
Also, some of the iotests crash when using "dist: bionic" on arm64
and ppc64le, thus these two builders have to use "dist: xenial" until
the problem is understood / fixed.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20191204154618.23560-8-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
test-util-filemonitor fails in restricted non-x86 Travis containers
since they apparently blacklisted some required system calls there.
Let's simply skip the test if we detect such an environment.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191204154618.23560-6-thuth@redhat.com>
In certain environments like restricted containers, we can not create
huge test images. To be able to use "make check" in such container
environments, too, let's skip the hd-geo-test instead of failing when
the test images could not be created.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191204154618.23560-5-thuth@redhat.com>
Test 079 fails in the arm64, s390x and ppc64le LXD containers on Travis
(which we will hopefully enable in our CI soon). These containers
apparently do not allow large files to be created. Test 079 tries to
create a 4G sparse file, which is apparently already too big for these
containers, so check first whether we can really create such files before
executing the test.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204154618.23560-4-thuth@redhat.com>
Test 060 fails in the arm64, s390x and ppc64le LXD containers on Travis
(which we will hopefully enable in our CI soon). These containers
apparently do not allow large files to be created. The repair process
in test 060 creates a file of 64 GiB, so test first whether such large
files are possible and skip the test if that's not the case.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204154618.23560-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Some tests create huge (but sparse) files, and to be able to run those
tests in certain limited environments (like CI containers), we have to
check for the possibility to create such files first. Thus let's introduce
a common function to check for large files, and replace the already
existing checks in the iotests 005 and 220 with this function.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204154618.23560-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
So far we only have compile coverage for tci. But since commit
2f160e0f97 ("tci: Add implementation
for INDEX_op_ld16u_i64") has been included now, we can also run the
"tcg" and "qtest" tests with tci, so let's enable them in Travis now.
Since we don't gain much additional test coverage by compiling all
targets, and TCI is broken e.g. with the Sparc targets, we also limit
the target list to a reasonable subset now (which should still get us
test coverage by tests/boot-serial-test for example).
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191204083133.6198-1-thuth@redhat.com>
[AJB: just --enable-debug-tcg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
By default VM build test use qemu-img from system's PATH to
create the image disk. Due the lack of qemu-img on the system
or the desire to simply use a version built with QEMU, it would
be nice to allow one to set its path. So this patch makes that
possible by reading the path to qemu-img from QEMU_IMG if set,
otherwise it fallback to default behavior.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20191114134246.12073-2-wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Our docker infrastructure isn't quite as multiarch as we would wish so
lets allow the user to disable it if they want. This will allow us to
use still run check-tcg on non-x86 CI setups.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=4LJa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python queue 2019-12-17
# gpg: Signature made Tue 17 Dec 2019 05:12:43 GMT
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
python/qemu: Remove unneeded imports in __init__
python/qemu: accel: Add tcg_available() method
python/qemu: accel: Strengthen kvm_available() checks
python/qemu: accel: Add list_accel() method
python/qemu: Move kvm_available() to its own module
Acceptance tests: use relative location for tests
Acceptance tests: use avocado tags for machine type
Acceptance tests: introduce utility method for tags unique vals
Acceptance test x86_cpu_model_versions: use default vm
tests/acceptance: Makes linux_initrd and empty_cpu_model use QEMUMachine
python/qemu: Add set_qmp_monitor() to QEMUMachine
analyze-migration.py: replace numpy with python 3.2
analyze-migration.py: fix find() type error
Revert "Acceptance test: cancel test if m68k kernel packages goes missing"
tests/boot_linux_console: Fetch assets from Debian snapshot archives
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the first pull request for the qemu-5.0 branch. It has a lot
of accumulated changes, including:
* SLOF update to support boot using the IOMMU (will become
necessary for secure guests)
* Clean ups to pnv handling of chip models
* A number of extensions to the powernv machine model
* TCG extensions to allow powernv emulated systems to run KVM guests
* Outline support for POWER10 chips in powernv
* Cleanups to the ibm,client-architecture-support feature negotiation path
* XIVE reworks to better handle the powernv machine
* Improvements to not waste interrupt queues and other semi-scarce
resources when using XIVE under KVM
-----BEGIN PGP SIGNATURE-----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=++Ha
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20191217' into staging
ppc patch queue 2019-12-17
This is the first pull request for the qemu-5.0 branch. It has a lot
of accumulated changes, including:
* SLOF update to support boot using the IOMMU (will become
necessary for secure guests)
* Clean ups to pnv handling of chip models
* A number of extensions to the powernv machine model
* TCG extensions to allow powernv emulated systems to run KVM guests
* Outline support for POWER10 chips in powernv
* Cleanups to the ibm,client-architecture-support feature negotiation path
* XIVE reworks to better handle the powernv machine
* Improvements to not waste interrupt queues and other semi-scarce
resources when using XIVE under KVM
# gpg: Signature made Tue 17 Dec 2019 04:42:20 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.0-20191217: (88 commits)
pseries: Update SLOF firmware image
ppc/pnv: Drop PnvChipClass::type
ppc/pnv: Introduce PnvChipClass::xscom_pcba() method
ppc/pnv: Drop pnv_chip_is_power9() and pnv_chip_is_power10() helpers
ppc/pnv: Pass content of the "compatible" property to pnv_dt_xscom()
ppc/pnv: Pass XSCOM base address and address size to pnv_dt_xscom()
ppc/pnv: Introduce PnvChipClass::xscom_core_base() method
ppc/pnv: Introduce PnvChipClass::intc_print_info() method
ppc/pnv: Drop pnv_is_power9() and pnv_is_power10() helpers
ppc/pnv: Introduce PnvMachineClass::dt_power_mgt()
ppc/pnv: Introduce PnvMachineClass and PnvMachineClass::compat
ppc/pnv: Drop PnvPsiClass::chip_type
ppc/pnv: Introduce PnvPsiClass::compat
ppc: Drop useless extern annotation for functions
ppc/pnv: Fix OCC common area region mapping
ppc/pnv: Introduce PBA registers
ppc/pnv: Make PnvXScomInterface an incomplete type
ppc/pnv: populate the DT with realized XSCOM devices
ppc/pnv: Loop on the whole hierarchy to populate the DT with the XSCOM nodes
target/ppc: Add SPR TBU40
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Feature:
* Cooperlake CPU model
Cleanups:
* Use g_autofree in a few places
-----BEGIN PGP SIGNATURE-----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=oyaO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging
x86 queue, 2019-12-16
Feature:
* Cooperlake CPU model
Cleanups:
* Use g_autofree in a few places
# gpg: Signature made Mon 16 Dec 2019 19:36:51 GMT
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-next-pull-request:
i386: Use g_autofree in a few places
i386: Add new CPU model Cooperlake
i386: Add macro for stibp
i386: Add MSR feature bit for MDS-NO
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
g_test_rand_int provides a reproducible random integer number, using a
different number seed every time but allowing reproduction using the
--seed command line option. It is thus better suited to tests than
g_random_int or random.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1576113478-42926-1-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The check-report.html and check-report.xml targets were replaced
with check-report.tap in commit 9df43317b8 but the check-help
text was not updated so it still lists check-report.html.
Fixes: 9df43317b8
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20191211204427.4681-2-wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We have a setenv() wrapper in os-win32.c that no one is actually using.
Drop it and change to g_setenv() uniformly.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1576074210-52834-7-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Devices "ivshmem-plain" and "ivshmem-doorbell" support only MSI-X.
Config space register Interrupt Pin is zero. Device "ivshmem"
additionally supported legacy INTx, but it was removed in commit
5a0e75f0a9 "hw/misc/ivshmem: Remove deprecated "ivshmem" legacy
device". The commit left ivshmem_update_irq() behind. Since the
Interrupt Pin register is zero, the function does nothing. Remove it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191205203557.11254-1-armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On ppc64, migration-test only works with kvm_hv, and we already
have a check to verify the module is loaded.
kvm_hv module can be loaded in memory and /sys/module/kvm_hv exists,
but on some systems (like build systems) /dev/kvm can be missing
(by administrators choice).
And as kvm_hv exists test-migration is started but QEMU falls back to
TCG because it cannot be used:
Could not access KVM kernel module: No such file or directory
failed to initialize KVM: No such file or directory
Back to tcg accelerator
And as the test is done with TCG, it fails.
As for s390x, we must check for the existence and the access rights
of /dev/kvm.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20191120170955.242900-1-lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
./configure --enable-sdl --audio-drv-list=sdl --enable-modules
Will generate two identical test names: /$arch/module/load/sdl
Which generates an error like:
(tests/modules-test:23814): GLib-ERROR **: 18:23:06.359: duplicate test case path: /aarch64//module/load/sdl
Add the subsystem prefix in the name as well, so instead we get:
/$arch/module/load/audio-sdl
/$arch/module/load/ui-sdl
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-Id: <d64c9aa098cc6e5c0b638438c4959eddfa7e24e2.1573679311.git.crobinso@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the bluetooth code has been removed, we don't need to test
with this library anymore.
Message-Id: <20191120091014.16883-5-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's been deprecated since QEMU v3.1. We've explicitly asked in the
deprecation message that people should speak up on qemu-devel in case
they are still actively using the bluetooth part of QEMU, but nobody
ever replied that they are really still using it.
I've tried it on my own to use this bluetooth subsystem for one of my
guests, but I was also not able to get it running anymore: When I was
trying to pass-through a real bluetooth device, either the guest did
not see the device at all, or the guest crashed.
Even worse for the emulated device: When running
qemu-system-x86_64 -bt device:keyboard
QEMU crashes once you hit a key.
So it seems like the bluetooth stack is not only neglected, it is
completely bitrotten, as far as I can tell. The only attention that
this code got during the past years were some CVEs that have been
spotted there. So this code is a burden for the developers, without
any real benefit anymore. Time to remove it.
Note: hw/bt/Kconfig only gets cleared but not removed here yet.
Otherwise there is a problem with the *-softmmu/config-devices.mak.d
dependency files - they still contain a reference to this file which
gets evaluated first on some build hosts, before the file gets
properly recreated. To avoid breaking these builders, we still need
the file around for some time. It will get removed in a couple of
weeks instead.
Message-Id: <20191120091014.16883-4-thuth@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This fixes PCI bridges support regression.
This enables IOMMU support in virtio drivers.
The full list of changes is:
Alexey Kardashevskiy (12):
allocator: Fix format strings for DEBUG
virtio: Make virtio_set_qaddr static
client: Load initramdisk location
sloffs: Fix -Wunused-result gcc warnings in read/write
pci-phb: Reimplement dma-map-in/out
virtio: Store queue descriptors in virtio_device
virtio-net: Init queues after features negotiation
virtio: Enable IOMMU
ibm,client-architecture-support: Fix stack handling
fdt: Fix updating the tree at H_CAS
version: update to 20191206
version: update to 20191217
Michael Roth (1):
dma: Define default dma methods for using by client/package instances
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It isn't used anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157623844102.360005.12070225703151669294.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The XSCOM bus is implemented with a QOM interface, which is mostly
generic from a CPU type standpoint, except for the computation of
addresses on the Pervasive Connect Bus (PCB) network. This is handled
by the pnv_xscom_pcba() function with a switch statement based on
the chip_type class level attribute of the CPU chip.
This can be achieved using QOM. Also the address argument is masked with
PNV_XSCOM_SIZE - 1, which is for POWER8 only. Addresses may have different
sizes with other CPU types. Have each CPU chip type handle the appropriate
computation with a QOM xscom_pcba() method.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157623843543.360005.13996472463887521794.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
They aren't used anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157623842986.360005.1787401623906380181.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since pnv_dt_xscom() is called from chip specific dt_populate() hooks,
it shouldn't have to guess the chip type in order to populate the
"compatible" property. Just pass the compat string and its size as
arguments.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157623842430.360005.9513965612524265862.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since pnv_dt_xscom() is called from chip specific dt_populate() hooks,
it shouldn't have to guess the chip type in order to populate the "reg"
property. Just pass the base address and address size as arguments.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157623841868.360005.17577624823547136435.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pnv_chip_core_realize() function configures the XSCOM MMIO subregion
for each core of a single chip. The base address of the subregion depends
on the CPU type. Its computation is currently open-code using the
pnv_chip_is_powerXX() helpers. This can be achieved with QOM. Introduce
a method for this in the base chip class and implement it in child classes.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157623841311.360005.4705705734873339545.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pnv_pic_print_info() callback checks the type of the chip in order
to forward to the request appropriate interrupt controller. This can
be achieved with QOM. Introduce a method for this in the base chip class
and implement it in child classes.
This also prepares ground for the upcoming interrupt controller of POWER10
chips.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157623840755.360005.5002022339473369934.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
They aren't used anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157623840200.360005.1300941274565357363.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We add an extra node to advertise power management on some machines,
namely powernv9 and powernv10. This is achieved by using the
pnv_is_power9() and pnv_is_power10() helpers.
This can be achieved with QOM. Add a method to the base class for
powernv machines and have it implemented by machine types that
support power management instead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157623839642.360005.9243510140436689941.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pnv_dt_create() function generates different contents for the
"compatible" property of the root node in the DT, depending on the
CPU type. This is open coded with multiple ifs using pnv_is_powerXX()
helpers.
It seems cleaner to achieve with QOM. Introduce a base class for the
powernv machine and a compat attribute that each child class can use
to provide the value for the "compatible" property.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157623839085.360005.4046508784077843216.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[dwg: Folded in small fix Greg spotted after posting]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
__init_.py import some sub-modules unnecessarily. So let's
clean it up.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Suggested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191216191438.93418-6-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
It isn't used anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157623838530.360005.15470128760871845396.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Processor Service Interface (PSI) model has a chip_type class level
attribute, which is used to generate the content of the "compatible" DT
property according to the CPU type.
Since the PSI model already has specialized classes for each supported
CPU type, it seems cleaner to achieve this with QOM. Provide the content
of the "compatible" property with a new class level attribute.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157623837974.360005.14706607446188964477.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <157623837421.360005.412120366652768311.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The OCC common area is mapped at a unique address on the system and
each OCC is assigned a segment to expose its sensor data :
-------------------------------------------------------------------------
| Start (Offset from | End | Size |Description |
| BAR2 base address) | | | |
-------------------------------------------------------------------------
| 0x00580000 | 0x005A57FF |150kB |OCC 0 Sensor Data Block|
| 0x005A5800 | 0x005CAFFF |150kB |OCC 1 Sensor Data Block|
| : | : | : | : |
| 0x00686800 | 0x006ABFFF |150kB |OCC 7 Sensor Data Block|
| 0x006AC000 | 0x006FFFFF |336kB |Reserved |
-------------------------------------------------------------------------
Maximum size is 1.5MB.
We could define a "OCC common area" memory region at the machine level
and sub regions for each OCC. But it adds some extra complexity to the
models. Fix the current layout with a simpler model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191211082912.2625-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PBA bridge unit (Power Bus Access) connects the OCC (On Chip
Controller) to the Power bus and System Memory. The PBA is used to
gather sensor data, for power management, for sleep states, for
initial boot, among other things.
The PBA logic provides a set of four registers PowerBus Access Base
Address Registers (PBABAR0..3) which map the OCC address space to the
PowerBus space. These registers are setup by the initial FW and define
the PowerBus Range of system memory that can be accessed by PBA.
The current modeling of the PBABAR registers is done under the common
XSCOM handlers. We introduce a specific XSCOM regions for these
registers and fix :
- BAR sizes and BAR masks
- The mapping of the OCC common area. It is common to all chips and
should be mapped once. We will address per-OCC area in the next
change.
- OCC common area is in BAR 3 on P8
Inspired by previous work of Balamuruhan S <bala24@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191211082912.2625-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PnvXScomInterface is an interface instance. It should never be
dereferenced. Drop the dummy type definition for extra safety,
which is the common practice with QOM interfaces.
While here also convert the bogus OBJECT_CHECK() to INTERFACE_CHECK().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157608025541.186670.1577861507610404326.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some devices could be initialized in the instance_init handler but not
realized for configuration reasons. Nodes should not be added in the DT
for such devices.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191210135845.19773-3-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some PnvXScomInterface objects lie a bit deeper (PnvPBCQState) than
the first layer, so we need to loop on the whole object hierarchy to
catch them.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191210135845.19773-2-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
[dwg: Corrected error in comment]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The spr TBU40 is used to set the upper 40 bits of the timebase
register, present on POWER5+ and later processors.
This register can only be written by the hypervisor, and cannot be read.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191128134700.16091-5-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Access Segment Descriptor Register (ASDR) provides information about
the storage element when taking a hypervisor storage interrupt. When
performing nested radix address translation, this is normally the guest
real address. This register is present on POWER9 processors and later.
Implement the ADSR, note read and write access is limited to the
hypervisor.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191128134700.16091-4-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Processor Utilisation of Resources Register (PURR) and Scaled
Processor Utilisation of Resources Register (SPURR) provide an estimate
of the resources used by the thread, present on POWER7 and later
processors.
Currently the [S]PURR registers simply count at the rate of the
timebase.
Preserve this behaviour but rework the implementation to store an offset
like the timebase rather than doing the calculation manually. Also allow
hypervisor write access to the register along with the currently
available read access.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[ clg: rebased on current ppc tree ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191128134700.16091-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The virtual timebase register (VTB) is a 64-bit register which
increments at the same rate as the timebase register, present on POWER8
and later processors.
The register is able to be read/written by the hypervisor and read by
the supervisor. All other accesses are illegal.
Currently the VTB is just an alias for the timebase (TB) register.
Implement the VTB so that is can be read/written independent of the TB.
Make use of the existing method for accessing timebase facilities where
by the compensation is stored and used to compute the value on reads/is
updated on writes.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[ clg: rebased on current ppc tree ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191128134700.16091-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Same a POWER9, only the MMIO window changes.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191205184454.10722-6-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
