Whenever a Xen block device is detach via xenstore, the image
associated with it remained open by the backend QEMU and an error is
logged:
qemu-system-i386: failed to destroy drive: Node xvdz-qcow2 is in use
This happened since object_unparent() doesn't immediately frees the
object and thus keep a reference to the node we are trying to free.
The reference is hold by the "drive" property and the call
xen_block_drive_destroy() fails.
In order to fix that, we call drain_call_rcu() to run the callback
setup by bus_remove_child() via object_unparent().
Fixes: 2d24a64661 ("device-core: use RCU for list of children of a bus")
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20210308143232.83388-1-anthony.perard@citrix.com>
- Fix build error when DEBUG_SD is on
- Perform SD ERASE operation
- SDHCI ADMA heap buffer overflow
(CVE-2020-17380, CVE-2020-25085, CVE-2021-3409)
-----BEGIN PGP SIGNATURE-----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=gvrj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd/tags/sdmmc-20210322' into staging
SD/MMC patches queue
- Fix build error when DEBUG_SD is on
- Perform SD ERASE operation
- SDHCI ADMA heap buffer overflow
(CVE-2020-17380, CVE-2020-25085, CVE-2021-3409)
# gpg: Signature made Mon 22 Mar 2021 17:13:43 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd/tags/sdmmc-20210322:
hw/sd: sdhci: Reset the data pointer of s->fifo_buffer[] when a different block size is programmed
hw/sd: sdhci: Limit block size only when SDHC_BLKSIZE register is writable
hw/sd: sdhci: Correctly set the controller status for ADMA
hw/sd: sdhci: Don't write to SDHC_SYSAD register when transfer is in progress
hw/sd: sdhci: Don't transfer any data when command time out
hw/sd: sd: Actually perform the erase operation
hw/sd: sd: Fix build error when DEBUG_SD is on
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the block size is programmed to a different value from the
previous one, reset the data pointer of s->fifo_buffer[] so that
s->fifo_buffer[] can be filled in using the new block size in
the next transfer.
With this fix, the following reproducer:
outl 0xcf8 0x80001010
outl 0xcfc 0xe0000000
outl 0xcf8 0x80001001
outl 0xcfc 0x06000000
write 0xe000002c 0x1 0x05
write 0xe0000005 0x1 0x02
write 0xe0000007 0x1 0x01
write 0xe0000028 0x1 0x10
write 0x0 0x1 0x23
write 0x2 0x1 0x08
write 0xe000000c 0x1 0x01
write 0xe000000e 0x1 0x20
write 0xe000000f 0x1 0x00
write 0xe000000c 0x1 0x32
write 0xe0000004 0x2 0x0200
write 0xe0000028 0x1 0x00
write 0xe0000003 0x1 0x40
cannot be reproduced with the following QEMU command line:
$ qemu-system-x86_64 -nographic -machine accel=qtest -m 512M \
-nodefaults -device sdhci-pci,sd-spec-version=3 \
-drive if=sd,index=0,file=null-co://,format=raw,id=mydrive \
-device sd-card,drive=mydrive -qtest stdio
Cc: qemu-stable@nongnu.org
Fixes: CVE-2020-17380
Fixes: CVE-2020-25085
Fixes: CVE-2021-3409
Fixes: d7dfca0807 ("hw/sdhci: introduce standard SD host controller")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: Cornelius Aschermann (Ruhr-Universität Bochum)
Reported-by: Sergej Schumilo (Ruhr-Universität Bochum)
Reported-by: Simon Wörner (Ruhr-Universität Bochum)
Buglink: https://bugs.launchpad.net/qemu/+bug/1892960
Buglink: https://bugs.launchpad.net/qemu/+bug/1909418
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1928146
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210303122639.20004-6-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The codes to limit the maximum block size is only necessary when
SDHC_BLKSIZE register is writable.
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210303122639.20004-5-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When an ADMA transfer is started, the codes forget to set the
controller status to indicate a transfer is in progress.
With this fix, the following 2 reproducers:
https://paste.debian.net/plain/1185136https://paste.debian.net/plain/1185141
cannot be reproduced with the following QEMU command line:
$ qemu-system-x86_64 -nographic -machine accel=qtest -m 512M \
-nodefaults -device sdhci-pci,sd-spec-version=3 \
-drive if=sd,index=0,file=null-co://,format=raw,id=mydrive \
-device sd-card,drive=mydrive -qtest stdio
Cc: qemu-stable@nongnu.org
Fixes: CVE-2020-17380
Fixes: CVE-2020-25085
Fixes: CVE-2021-3409
Fixes: d7dfca0807 ("hw/sdhci: introduce standard SD host controller")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: Cornelius Aschermann (Ruhr-Universität Bochum)
Reported-by: Sergej Schumilo (Ruhr-Universität Bochum)
Reported-by: Simon Wörner (Ruhr-Universität Bochum)
Buglink: https://bugs.launchpad.net/qemu/+bug/1892960
Buglink: https://bugs.launchpad.net/qemu/+bug/1909418
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1928146
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210303122639.20004-4-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
At the end of sdhci_send_command(), it starts a data transfer if the
command register indicates data is associated. But the data transfer
should only be initiated when the command execution has succeeded.
With this fix, the following reproducer:
outl 0xcf8 0x80001810
outl 0xcfc 0xe1068000
outl 0xcf8 0x80001804
outw 0xcfc 0x7
write 0xe106802c 0x1 0x0f
write 0xe1068004 0xc 0x2801d10101fffffbff28a384
write 0xe106800c 0x1f 0x9dacbbcad9e8f7061524334251606f7e8d9cabbac9d8e7f60514233241505f
write 0xe1068003 0x28 0x80d000251480d000252280d000253080d000253e80d000254c80d000255a80d000256880d0002576
write 0xe1068003 0x1 0xfe
cannot be reproduced with the following QEMU command line:
$ qemu-system-x86_64 -nographic -M pc-q35-5.0 \
-device sdhci-pci,sd-spec-version=3 \
-drive if=sd,index=0,file=null-co://,format=raw,id=mydrive \
-device sd-card,drive=mydrive \
-monitor none -serial none -qtest stdio
Cc: qemu-stable@nongnu.org
Fixes: CVE-2020-17380
Fixes: CVE-2020-25085
Fixes: CVE-2021-3409
Fixes: d7dfca0807 ("hw/sdhci: introduce standard SD host controller")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: Cornelius Aschermann (Ruhr-Universität Bochum)
Reported-by: Sergej Schumilo (Ruhr-Universität Bochum)
Reported-by: Simon Wörner (Ruhr-Universität Bochum)
Buglink: https://bugs.launchpad.net/qemu/+bug/1892960
Buglink: https://bugs.launchpad.net/qemu/+bug/1909418
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1928146
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210303122639.20004-2-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
At present the sd_erase() does not erase the requested range of card
data to 0xFFs. Let's make the erase operation actually happen.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <1613811493-58815-1-git-send-email-bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
"qemu-common.h" should be included to provide the forward declaration
of qemu_hexdump() when DEBUG_SD is on.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210228050609.24779-1-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Coverity reported (CID 1450831) an array overrun in
gen_mxu_D16MAX_D16MIN():
1103 } else if (unlikely((XRb == 0) || (XRa == 0))) {
....
1112 if (opc == OPC_MXU_D16MAX) {
1113 tcg_gen_smax_i32(mxu_gpr[XRa - 1], t0, t1);
1114 } else {
1115 tcg_gen_smin_i32(mxu_gpr[XRa - 1], t0, t1);
1116 }
>>> Overrunning array "mxu_gpr" of 15 8-byte elements at element
index 4294967295 (byte offset 34359738367) using index "XRa - 1U"
(which evaluates to 4294967295).
This happens because the code is confused about which of XRa, XRb and
XRc is the output, and which are the inputs. XRa is the output, but
most of the conditions separating out different special cases are
written as if XRc is the output, with the result that we can end up
in the code path that assumes XRa is non-0 even when it is zero.
Fix the erroneous code, bringing it in to line with the structure
used in functions like gen_mxu_S32MAX_S32MIN() and
gen_mxu_Q8MAX_Q8MIN().
Fixes: CID 1450831
Fixes: bb84cbf385
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210316131353.4533-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Version: GnuPG v1
iQEcBAABAgAGBQJgWGTMAAoJEO8Ells5jWIRLUQIAJ6xxOKldqyo9n9N2vP+6O1J
lLSC0NT2d0ACptl/8o+KKlf9z2n7o/SKykLUXwCjgLeT2xTKhJ+p8tPOXJ4gns3D
U3GGc20gUkuGwNl0g2Rr2Yz4EJXlxx5Sl9LJz9quyx0Yp0SV8fYgQpj3mLgRye6T
hbVSDnQiSyo1iSx+Q/Qc6+Gr4a+sV4pExhrVP1n61JFCB95DUMNqjBsHv+urowHh
WCN9JbHuiZRHeIGIZujJxzMrh8jlP4pPFIrXvsdwHm/xJlVTgMXFvfIjfi3IrYWU
NbI0PluSfPbeAB8V+aPb9386K4UFpEEHJipIm+4HSVpVsAuoRVnEVoIWGubXfWo=
=9Tij
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 22 Mar 2021 09:35:08 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net/eth: Add an assert() and invert if() statement to simplify code
net/eth: Read ip6_ext_hdr_routing buffer before accessing it
net/eth: Check iovec has enough data earlier
net/eth: Check size earlier in _eth_get_rss_ex_dst_addr()
net/eth: Better describe _eth_get_rss_ex_dst_addr's offset argument
net/eth: Simplify _eth_get_rss_ex_dst_addr()
net/eth: Use correct in6_address offset in _eth_get_rss_ex_dst_addr()
net/colo-compare.c: Optimize removal of secondary packet
net/colo-compare.c: Fix memory leak for non-tcp packet
hw/net: virtio-net: Initialize nc->do_not_pad to true
net: Pad short frames to minimum size before sending from SLiRP/TAP
net: Add a 'do_not_pad" to NetClientState
net: eth: Add a helper to pad a short Ethernet frame
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To simplify the function body, invert the if() statement, returning
earlier.
Since we already checked there is enough data in the iovec buffer,
simply add an assert() call to consume the bytes_read variable.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We want to check fields from ip6_ext_hdr_routing structure
and if correct read the full in6_address. Let's directly check
if our iovec contains enough data for everything, else return
early.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The 'offset' argument represents the offset to the ip6_ext_hdr
header, rename it as 'ext_hdr_offset'.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The length field is already contained in the ip6_ext_hdr structure.
Check it direcly in eth_parse_ipv6_hdr() before calling
_eth_get_rss_ex_dst_addr(), which gets a bit simplified.
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The in6_address comes after the ip6_ext_hdr_routing header,
not after the ip6_ext_hdr one. Fix the offset.
Cc: qemu-stable@nongnu.org
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: eb700029c7 ("net_pkt: Extend packet abstraction as required by e1000e functionality")
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
g_queue_remove needs to look up the list entry first, but we
already have it as result and can remove it directly with
g_queue_delete_link.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Additional to removing the packet from the secondary queue,
we also need to free it.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
For virtio-net, there is no need to pad the Ethernet frame size to
60 bytes before sending to it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The minimum Ethernet frame length is 60 bytes. For short frames with
smaller length like ARP packets (only 42 bytes), on a real world NIC
it can choose either padding its length to the minimum required 60
bytes, or sending it out directly to the wire. Such behavior can be
hardcoded or controled by a register bit. Similarly on the receive
path, NICs can choose either dropping such short frames directly or
handing them over to software to handle.
On the other hand, for the network backends like SLiRP/TAP, they
don't expose a way to control the short frame behavior. As of today
they just send/receive data from/to the other end connected to them,
which means any sized packet is acceptable. So they can send and
receive short frames without any problem. It is observed that ARP
packets sent from SLiRP/TAP are 42 bytes, and SLiRP/TAP just send
these ARP packets to the other end which might be a NIC model that
does not allow short frames to pass through.
To provide better compatibility, for packets sent from QEMU network
backends like SLiRP/TAP, we change to pad short frames before sending
it out to the other end, if the other end does not forbid it via the
nc->do_not_pad flag. This ensures a backend as an Ethernet sender
does not violate the spec. But with this change, the behavior of
dropping short frames from SLiRP/TAP interfaces in the NIC model
cannot be emulated because it always receives a packet that is spec
complaint. The capability of sending short frames from NIC models is
still supported and short frames can still pass through SLiRP/TAP.
This commit should be able to fix the issue as reported with some
NIC models before, that ARP requests get dropped, preventing the
guest from becoming visible on the network. It was workarounded in
these NIC models on the receive path, that when a short frame is
received, it is padded up to 60 bytes.
The following 2 commits seem to be the one to workaround this issue
in e1000 and vmxenet3 before, and should probably be reverted.
commit 78aeb23ede ("e1000: Pad short frames to minimum size (60 bytes)")
commit 40a87c6c9b ("vmxnet3: Pad short frames to minimum size (60 bytes)")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This adds a flag in NetClientState, so that a net client can tell
its peer that the packets do not need to be padded to the minimum
size of an Ethernet frame (60 bytes) before sending to it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add a helper to pad a short Ethernet frame to the minimum required
length, which can be used by backends' code.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
FreeBSD 12.1 has reached end of life. Use 12.2 instead so that FreeBSD's
project's packages will work. Update which timezone to pick. Work around a QEMU
bug that incorrectly raises an exception on a CRC32 instruction with the FPU
disabled. The qemu bug is described here:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg784158.html
Signed-off-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20210307155654.993-2-imp@bsdimp.com>
[thuth: Disable gnutls to work-around a problem with libtasn1]
Signed-off-by: Thomas Huth <thuth@redhat.com>
sun is a macro on these systems, thus renaming the variables on the
client and server.
Signed-off-by: David Carlier <devnexen@gmail.com>
Message-Id: <CA+XhMqzHPG5ezqY-YxbA+tMoadA3VDFWBX8_LaLC5YsQOMrz+A@mail.gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
local directive make the configure fails on these systems.
Signed-off-by: David Carlier <devnexen@gmail.com>
Message-Id: <CA+XhMqy95D8X-QvBcEfL=a-Rkgy6aJtheskkqZwQkreru+T_Wg@mail.gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When building qemu with GCC 11, test-block-iothread produces the following
warning:
../tests/unit/test-block-iothread.c:148:11: error: ‘buf’ may be used
uninitialized [-Werror=maybe-uninitialized]
This is caused by buf[512] left uninitialized and passed to
bdrv_save_vmstate() that expects a const uint8_t *, so the compiler
assumes it will be read and expects the parameter to be initialized.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210319112218.49609-1-eesposit@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
With the recent move of the unit tests to tests/unit directory some
instructions under the "Unit tests" section became imprecise, which
are fixed by this change.
Fixes: da668aa15b ("tests: Move unit tests into a separate directory")
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210318174407.2299930-1-wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Policy "crash" calls abort() when deprecated input is received.
Bugs in integration tests may mask the error from policy "reject".
Provide a larger hammer: crash outright. Masking that seems unlikely.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-12-armbru@redhat.com>
This policy rejects deprecated input, and thus permits "testing the
future". Implement it for QMP command arguments: reject commands with
deprecated ones. Example: when QEMU is run with -compat
deprecated-input=reject, then
{"execute": "eject", "arguments": {"device": "cd"}}
fails like this
{"error": {"class": "GenericError", "desc": "Deprecated parameter 'device' disabled by policy"}}
When the deprecated parameter is removed, the error will change to
{"error": {"class": "GenericError", "desc": "Parameter 'device' is unexpected"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-11-armbru@redhat.com>
This policy rejects deprecated input, and thus permits "testing the
future". Implement it for QMP commands: make deprecated ones fail.
Example: when QEMU is run with -compat deprecated-input=reject, then
{"execute": "query-cpus"}
fails like this
{"error": {"class": "CommandNotFound", "desc": "Deprecated command query-cpus disabled by policy"}}
When the deprecated command is removed, the error will change to
{"error": {"class": "CommandNotFound", "desc": "The command query-cpus has not been found"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-10-armbru@redhat.com>
Without this stub, the next commit fails to link. I suspect the real
cause is 947e47448d "monitor: Use getter/setter functions for
cur_mon".
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-9-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP command query-qmp-schema:
suppress information on deprecated commands, events and object type
members, i.e. anything that has the special feature flag "deprecated".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-8-armbru@redhat.com>
QMP commands return their response as a generated QAPI type, which the
monitor core converts to JSON via QObject.
query-qmp-schema's response is the generated introspection data. This
is a QLitObject since commit 7d0f982bfb "qapi: generate a literal
qobject for introspection", v2.12). Before, it was a string. Instead
of converting QLitObject / string -> QObject -> QAPI type
SchemaInfoList -> QObject -> JSON, we take a shortcut: the command is
'gen': false, so it can return the QObject instead of the QAPI type.
Slightly simpler and more efficient.
The next commit will filter the response for output policy, and this
is easier in the SchemaInfoList representation. Drop the shortcut.
This replaces the manual command registration by a generated one. The
manual registration makes the command available before the machine is
built by passing flag QCO_ALLOW_PRECONFIG. To keep it available
there, we need need to add 'allow-preconfig': true to its definition
in the schema.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-7-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP event data: suppress
deprecated members.
No QMP event data is deprecated right now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-6-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP events: suppress
deprecated ones.
No QMP event is deprecated right now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-5-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP command results. Example:
when QEMU is run with -compat deprecated-output=hide, then
{"execute": "query-cpus-fast"}
yields
{"return": [{"thread-id": 9805, "props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "qom-path": "/machine/unattached/device[0]", "cpu-index": 0, "target": "x86_64"}]}
instead of
{"return": [{"arch": "x86", "thread-id": 22436, "props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "qom-path": "/machine/unattached/device[0]", "cpu-index": 0, "target": "x86_64"}]}
Note the suppression of deprecated member "arch".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-4-armbru@redhat.com>
New option -compat lets you configure what to do when deprecated
interfaces get used. This is intended for testing users of the
management interfaces. It is experimental.
-compat deprecated-input=<input-policy> configures what to do when
deprecated input is received. Input policy can be "accept" (accept
silently), or "reject" (reject the request with an error).
-compat deprecated-output=<out-policy> configures what to do when
deprecated output is sent. Output policy can be "accept" (pass on
unchanged), or "hide" (filter out the deprecated parts).
Default is "accept". Policies other than "accept" are implemented
later in this series.
For now, -compat covers only syntactic aspects of QMP, i.e. stuff
tagged with feature 'deprecated'. We may want to extend it to cover
semantic aspects, CLI, and experimental features.
Note that there is no good way for management application to detect
presence of -compat: it's not visible output of query-qmp-schema or
query-command-line-options. Tolerable, because it's meant for
testing. If running with -compat fails, skip the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-3-armbru@redhat.com>
libqemuutil has two definitions of qemu_set_fd_handler. This
is not needed since the only users of the function are
qemu-io.c and the emulators, both of which already include
util/main-loop.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <d0c5aa88-029e-4328-7a53-482a3010c5f8@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210318155519.1224118-2-armbru@redhat.com>
Clean up the writes to the configuration space and the PM region, and
rename the test to lpc-ich9-test.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Almost all QOM type names consist only of letters, digits, '-', '_',
and '.'. Just two contain ':': "qemu:memory-region" and
"qemu:iommu-memory-region". Neither can be plugged with -object.
Rename them to "memory-region" and "iommu-memory-region".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210304140229.575481-3-armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Several QOM type names contain ',':
ARM,bitband-memory
etraxfs,pic
etraxfs,serial
etraxfs,timer
fsl,imx25
fsl,imx31
fsl,imx6
fsl,imx6ul
fsl,imx7
grlib,ahbpnp
grlib,apbpnp
grlib,apbuart
grlib,gptimer
grlib,irqmp
qemu,register
SUNW,bpp
SUNW,CS4231
SUNW,DBRI
SUNW,DBRI.prom
SUNW,fdtwo
SUNW,sx
SUNW,tcx
xilinx,zynq_slcr
xlnx,zynqmp
xlnx,zynqmp-pmu-soc
xlnx,zynq-xadc
These are all device types. They can't be plugged with -device /
device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one
actually works.
They *can* be used with -device / device_add to request help.
Usability is poor, though: you have to double the comma, like this:
$ qemu-system-x86_64 -device SUNW,,fdtwo,help
Trap for the unwary. The fact that this was broken in
device-introspect-test for more than six years until commit e27bd49876
fixed it demonstrates that "the unwary" includes seasoned developers.
One QOM type name contains ' ': "ICH9 SMB". Because having to
remember just one way to quote would be too easy.
Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and '
' by '-' in the other type names.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210304140229.575481-2-armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the crap deprecated in commit a1b40bda08 "blockdev: Deprecate
-drive with bogus interface type" (v5.1.0).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20210309161214.1402527-5-armbru@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
