register a "CpusAccel" interface for HVF as well.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
[added const]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
register a "CpusAccel" interface for WHPX as well.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
register a "CpusAccel" interface for HAX as well.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
refactoring of cpus.c continues with cpu timer state extraction.
cpu-timers: responsible for the softmmu cpu timers state,
including cpu clocks and ticks.
icount: counts the TCG instructions executed. As such it is specific to
the TCG accelerator. Therefore, it is built only under CONFIG_TCG.
One complication is due to qtest, which uses an icount field to warp time
as part of qtest (qtest_clock_warp).
In order to solve this problem, provide a separate counter for qtest.
This requires fixing assumptions scattered in the code that
qtest_enabled() implies icount_enabled(), checking each specific case.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[remove redundant initialization with qemu_spice_init]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[fix lingering calls to icount_get]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Post memory failure event through QMP to handle hardware memory corrupted
event. Rather than simply printing to the log, QEMU could report more
effective message to the client. For example, if a guest receives an MCE,
evacuating the host could be a good idea.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20200930100440.1060708-4-pizhenwei@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously we would only get a simple string "Triple fault" in qemu
log. Add detailed message for the two reasons to describe why qemu
has to reset the guest.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20200930100440.1060708-2-pizhenwei@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable s390x, aka SYSZ, in the git submodule build.
Set the capstone parameters for both s390x host and guest.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As with the other crypto functions, we only implement subcode 0 (query)
and no actual encryption/decryption. We now implement S390_FEAT_MSA_EXT_8.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200928122717.30586-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We implement all relevant instructions.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200928122717.30586-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We need new CC handling, determining the CC based on the intermediate
result (64bit for MSC and MSRKC, 128bit for MSGC and MSGRKC).
We want to store out2 ("low") after muls128 to r1, so add
"wout_out2_r1".
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200928122717.30586-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Just like BRANCH ON CONDITION - however the address is read from memory
(always 8 bytes are read), we have to wrap the address manually. The
address is read using current CPU DAT/address-space controls, just like
ordinary data.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200928122717.30586-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Just like MULTIPLY HALFWORD IMMEDIATE (MGHI), only the second operand
(signed 16 bit) comes from memory.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200928122717.30586-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Multiply two signed 64bit values and store the 128bit result in r1 (0-63)
and r1 + 1 (64-127).
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200928122717.30586-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Easy, just like ADD HALFWORD IMMEDIATE (AGHI).
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200928122717.30586-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Recent upstream Linux uses the MONITOR CALL instruction for things like
BUG_ON() and WARN_ON(). We currently inject an operation exception when
we hit a MONITOR CALL instruction - which is wrong, as the instruction
is not glued to specific CPU features.
Doing a simple WARN_ON_ONCE() currently results in a panic:
[ 18.162801] illegal operation: 0001 ilc:2 [#1] SMP
[ 18.162889] Modules linked in:
[...]
[ 18.165476] Kernel panic - not syncing: Fatal exception: panic_on_oops
With a proper implementation, we now get:
[ 18.242754] ------------[ cut here ]------------
[ 18.242855] WARNING: CPU: 7 PID: 1 at init/main.c:1534 [...]
[ 18.242919] Modules linked in:
[...]
[ 18.246262] ---[ end trace a420477d71dc97b4 ]---
[ 18.259014] Freeing unused kernel memory: 4220K
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200918085122.26132-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
DIAGNOSE 0x318 (diag318) is an s390 instruction that allows the storage
of diagnostic information that is collected by the firmware in the case
of hardware/firmware service events.
QEMU handles the instruction by storing the info in the CPU state. A
subsequent register sync will communicate the data to the hypervisor.
QEMU handles the migration via a VM State Description.
This feature depends on the Extended-Length SCCB (els) feature. If
els is not present, then a warning will be printed and the SCLP bit
that allows the Linux kernel to execute the instruction will not be
set.
Availability of this instruction is determined by byte 134 (aka fac134)
bit 0 of the SCLP Read Info block. This coincidentally expands into the
space used for CPU entries, which means VMs running with the diag318
capability may not be able to read information regarding all CPUs
unless the guest kernel supports an extended-length SCCB.
This feature is not supported in protected virtualization mode.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-9-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As more features and facilities are added to the Read SCP Info (RSCPI)
response, more space is required to store them. The space used to store
these new features intrudes on the space originally used to store CPU
entries. This means as more features and facilities are added to the
RSCPI response, less space can be used to store CPU entries.
With the Extended-Length SCCB (ELS) facility, a KVM guest can execute
the RSCPI command and determine if the SCCB is large enough to store a
complete reponse. If it is not large enough, then the required length
will be set in the SCCB header.
The caller of the SCLP command is responsible for creating a
large-enough SCCB to store a complete response. Proper checking should
be in place, and the caller should execute the command once-more with
the large-enough SCCB.
This facility also enables an extended SCCB for the Read CPU Info
(RCPUI) command.
When this facility is enabled, the boundary violation response cannot
be a result from the RSCPI, RSCPI Forced, or RCPUI commands.
In order to tolerate kernels that do not yet have full support for this
feature, a "fixed" offset to the start of the CPU Entries within the
Read SCP Info struct is set to allow for the original 248 max entries
when this feature is disabled.
Additionally, this is introduced as a CPU feature to protect the guest
from migrating to a machine that does not support storing an extended
SCCB. This could otherwise hinder the VM from being able to read all
available CPU entries after migration (such as during re-ipl).
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-7-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
While converting to gen_gvec_ool_zzzp, we lost passing
a->esz as the data argument to the function.
Fixes: 36cbb7a8e7
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200918000500.2690937-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The mte update missed a bit when producing clean addresses.
Fixes: b2aa8879b8
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200916014102.2446323-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The M-profile definition of the MVFR1 ID register differs slightly
from the A-profile one, and in particular the check for "does the CPU
support fp16 arithmetic" is not the same.
We don't currently implement any M-profile CPUs with fp16 arithmetic,
so this is not yet a visible bug, but correcting the logic now
disarms this beartrap for when we eventually do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-6-peter.maydell@linaro.org
Give the Cortex-M0 ID register values corresponding to its
implemented behaviour. These will not be guest-visible but will be
used to govern the behaviour of QEMU's emulation. We use the same
values that the Cortex-M3 does.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-5-peter.maydell@linaro.org
Move the id_pfr0 and id_pfr1 fields into the ARMISARegisters
sub-struct. We're going to want id_pfr1 for an isar_features
check, and moving both at the same time avoids an odd
inconsistency.
Changes other than the ones to cpu.h and kvm64.c made
automatically with:
perl -p -i -e 's/cpu->id_pfr/cpu->isar.id_pfr/' target/arm/*.c hw/intc/armv7m_nvic.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-3-peter.maydell@linaro.org
The ARM_FEATURE_PXN bit indicates whether the CPU supports the PXN
bit in short-descriptor translation table format descriptors. This
is indicated by ID_MMFR0.VMSA being at least 0b0100. Replace the
feature bit with an ID register check, in line with our preference
for ID register checks over feature bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-2-peter.maydell@linaro.org
Paravirtualized features have been listed in KVM_GET_SUPPORTED_CPUID since
Linux 2.6.35 (commit 84478c829d0f, "KVM: x86: export paravirtual cpuid flags
in KVM_GET_SUPPORTED_CPUID", 2010-05-19). It has been more than 10 years,
so remove the fallback code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU's kvmclock device is only created when KVM PV feature bits for
kvmclock (KVM_FEATURE_CLOCKSOURCE/KVM_FEATURE_CLOCKSOURCE2) are
exposed to the guest. With 'kvm=off' cpu flag the device is not
created and we don't call KVM_GET_CLOCK/KVM_SET_CLOCK upon migration.
It was reported that without these call at least Hyper-V TSC page
clocksouce (which can be enabled independently) gets broken after
migration.
Switch to creating kvmclock QEMU device unconditionally, it seems
to always make sense to call KVM_GET_CLOCK/KVM_SET_CLOCK on migration.
Use KVM_CAP_ADJUST_CLOCK check instead of CPUID feature bits.
Reported-by: Antoine Damhet <antoine.damhet@blade-group.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200922151934.899555-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VM with interrupt based APF enabled fails to migrate:
qemu-system-x86_64: error: failed to set MSR 0x4b564d02 to 0xf3
We have two issues:
1) There is a typo in kvm_put_msrs() and we write async_pf_int_msr
to MSR_KVM_ASYNC_PF_EN (instead of MSR_KVM_ASYNC_PF_INT)
2) We restore MSR_KVM_ASYNC_PF_EN before MSR_KVM_ASYNC_PF_INT is set
and this violates the check in KVM.
Re-order MSR_KVM_ASYNC_PF_EN/MSR_KVM_ASYNC_PF_INT setting (and
kvm_get_msrs() for consistency) and fix the typo.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200917102316.814804-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The exception_is_int flag may be set on entry to helper_syscall,
e.g. after a prior interrupt that has returned, and processing
EXCP_SYSCALL as an interrupt causes it to fail so clear this flag.
Signed-off-by: Douglas Crosher <dtc-ubuntu@scieneer.com>
Message-Id: <a7dab33e-eda6-f988-52e9-f3d32db7538d@scieneer.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per Intel SDM vol 1, 13.2, if CPUID.1:ECX.XSAVE[bit 26] is 0, the
processor provides no further enumeration through CPUID function 0DH.
QEMU does not do this for "-cpu host,-xsave".
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200716082019.215316-2-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux-5.8 introduced interrupt based mechanism for 'page ready' events
delivery and disabled the old, #PF based one (see commit 2635b5c4a0e4
"KVM: x86: interrupt based APF 'page ready' event delivery"). Linux
guest switches to using in in 5.9 (see commit b1d405751cd5 "KVM: x86:
Switch KVM guest to using interrupts for page ready APF delivery").
The feature has a new KVM_FEATURE_ASYNC_PF_INT bit assigned and
the interrupt vector is set in MSR_KVM_ASYNC_PF_INT MSR. Support this
in QEMU.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200908141206.357450-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Newer versions of WHPX provide the capability to query the tsc
and apic frequency. Expose these through the vmware cpuid leaf.
This patch doesnt support setting the tsc frequency; that will
come as a separate fix.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB08808DFDDC3F442BBEAADFF4C0710@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200921221045.699690-13-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When debugging QEMU it is often useful to put a breakpoint on the
error_setg_internal method impl.
Unfortunately the object_property_add / object_class_property_add
methods call object_property_find / object_class_property_find methods
to check if a property exists already before adding the new property.
As a result there are a huge number of calls to error_setg_internal
on startup of most QEMU commands, making it very painful to set a
breakpoint on this method.
Most callers of object_find_property and object_class_find_property,
however, pass in a NULL for the Error parameter. This simplifies the
methods to remove the Error parameter entirely, and then adds some
new wrapper methods that are able to raise an Error when needed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200914135617.1493072-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
One of the goals of having less boilerplate on QOM declarations
is to avoid human error. Requiring an extra argument that is
never used is an opportunity for mistakes.
Remove the unused argument from OBJECT_DECLARE_TYPE and
OBJECT_DECLARE_SIMPLE_TYPE.
Coccinelle patch used to convert all users of the macros:
@@
declarer name OBJECT_DECLARE_TYPE;
identifier InstanceType, ClassType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_TYPE(InstanceType, ClassType,
- lowercase,
UPPERCASE);
@@
declarer name OBJECT_DECLARE_SIMPLE_TYPE;
identifier InstanceType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_SIMPLE_TYPE(InstanceType,
- lowercase,
UPPERCASE);
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200916182519.415636-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
apic_id contains all the information required to build
CPUID_8000_001E. core_id and node_id is already part of
apic_id generated by x86_topo_ids_from_apicid.
Also remove the restriction on number bits on core_id and
node_id.
Remove all the hardcoded values and replace with generalized
fields.
Refer the Processor Programming Reference (PPR) documentation
available from the bugzilla Link below.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Message-Id: <159897585257.30750.5815593918927986935.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Remove all the hardcoded values and replace with generalized
fields.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <159897584649.30750.3939159632943292252.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Hyper-V TLFS prior to version 6.0 had a mistake in it: special value
'0xffffffff' for CPUID 0x40000004.EBX was called 'never to retry', this
looked weird (like why it's not '0' which supposedly have the same effect?)
but nobody raised the question. In TLFS version 6.0 the mistake was
corrected to 'never notify' which sounds logical. Fix QEMU accordingly.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200515114847.74523-1-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This check was backwards when introduced in commit
033614c47d:
target/arm: Filter cycle counter based on PMCCFILTR_EL0
Cc: qemu-stable@nongnu.org
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
