* 'for-anthony' of git://repo.or.cz/qemu/kevin:
Add qcow2 documentation
hw/xen_disk: aio_inflight not released in handling ioreq when nr_segments==0
Improve error handling in do_snapshot_blkdev()
Fix ATA SMART and CHECK POWER MODE
Don't allow multiwrites against a block device without underlying medium
tools: Use real async.c instead of stubs
Add error message for loading snapshot without VM state
block/qcow: Don't ignore immediate read/write and other failures
block/vdi: Don't ignore immediate read/write failures
Add support for the Versatile Express SYS_CFG registers, which provide
a generic means of reading or writing configuration information from
various parts of the board. We only implement shutdown and reset.
Also make the RESETCTL register RAZ/WI on Versatile Express rather
than reset the board. Other system registers are generally the same
as Versatile and Realview.
This includes a VMState version number bump for arm_sysctl,
since we have new register state to preserve. It also adds
sys_mci to the VMState while we're bumping the version number
(an accidental omission from commit b50ff6f5).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Prevent:
-chardev socket,path=/tmp/foo,server,nowait,id=c0 \
-device virtserialport,chardev=c0,id=vs0 \
-device virtserialport,chardev=c0,id=vs1
Reported-by: Mike Cao <bcao@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
After a hot-unplug operation, the previous behaviour was to close the
chardev. That meant the chardev couldn't be re-used. Also, since
chardev hot-plug isn't possible so far, this means virtio-console
hot-plug isn't feasible as well.
With this change, the chardev is kept around. A new virtio-console
channel can then be hot-plugged with the same chardev and things will
continue to work.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
After a port unplug operation, the port->info->have_data() pointer was
set to NULL. The problem is, the ->info struct is shared by all ports,
effectively disabling writes to other ports.
Reported-by: juzhang <juzhang@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
There's no code change, just re-arrangement to simplify the function
after recent modifications.
Reported-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Enable ioeventfd for virtio-serial devices by default. Commit
25db9ebe15 lists the benefits of using
ioeventfd.
Copying a file from guest to host over a virtio-serial channel didn't
show much difference in time or io_exit rate.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Port 0 is reserved for virtconsole devices for backward compatibility
with the old -virtioconsole (from qemu 0.12) device type.
libvirt prior to commit 8e28c5d40200b4c5d483bd585d237b9d870372e5 used
port 0 for generic ports. libvirt will no longer do that, but disallow
instantiating generic ports at id 0 from qemu as well.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Instead of using a single variable to pass to the virtio_serial_init
function, use a struct so that expanding the number of variables to be
passed on later is easier.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This was done with:
sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \
$(git grep -l 'qemu_get_clock\>' )
sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \
$(git grep -l 'qemu_new_timer\>' )
after checking that get_clock and new_timer never occur twice
on the same line. There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.
There was exactly one false positive in qemu_run_timers:
- current_time = qemu_get_clock (clock);
+ current_time = qemu_get_clock_ns (clock);
which is of course not in this patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was done with:
sed -i '/get_clock\>.*rt_clock/s/get_clock\>/get_clock_ms/' \
$(git grep -l 'get_clock\>.*rt_clock' )
sed -i '/new_timer\>.*rt_clock/s/new_timer\>/new_timer_ms/' \
$(git grep -l 'new_timer\>.*rt_clock' )
after checking that get_clock and new_timer never occur twice
on the same line. There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove a write-only variable, spotted by GCC 4.6.0:
/src/qemu/hw/petalogix_ml605_mmu.c: In function 'petalogix_ml605_init':
/src/qemu/hw/petalogix_ml605_mmu.c:153:11: error: variable 'serial' set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qdev conversion broke migration as the previous version used vmstate
instance IDs derived from the iobase. Fix it by registering a legacy
alias.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add the first Microblaze little endian platform.
Platform uses uart16550, axi ethernet, timer, intc.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
In hw/xen_disk.c, async writing ioreq is leaked when
ioreq->req.nr_segments==0, because `aio_inflight` flag is not released
properly (skipped by misplaced "break").
Signed-off-by: Feiran Zheng <famcool@gmail.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch fixes two things:
1) CHECK POWER MODE
The error return value wasn't always zero, so it would show up as
offline. Error is now explicitly set to zero.
2) SMART
The smart values that were returned were invalid and tools like skdump
would not recognize that the smart data was actually valid and would
dump weird output. The data has been fixed up and raw value support
was added. Tools like skdump and palimpsest work as expected.
Signed-off-by: Brian Wheeler <bdwheele@indiana.edu>
Acked-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This ensures env->halt_cond is broadcast, and the loop in
qemu_tcg_wait_io_event and qemu_kvm_wait_io_event is exited
naturally rather than through a timeout.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Index 75 is one too large for AR_TABLE[75], DR_TABLE[75].
This error was reported by cppcheck.
hw/fmopl.c:600: error: Buffer access out-of-bounds: OPL.AR_TABLE
hw/fmopl.c:601: error: Buffer access out-of-bounds: OPL.DR_TABLE
Fix this by limiting the access to the allowed range.
MultiArcadeMachineEmulator has newer versions of fmopl,
but using these requires more efforts.
Cc: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: malc <av1474@comtv.ru>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The initialization should not be only on reset but also when initializing
the device.
It resolves a bug when hot plugging a pci network device: the mac address
was always null.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Before commit 63ffb564dc, states for
floppy drives were calculated in fdc.c:fd_revalidate(). There it is
also considered whether a disk is inserted or not. The commit didn't copy
the logic completely to pc.c, which caused a regression.
Fix by adding the same check also to pc.c.
Reported-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Tested-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Extend mst_fpga and mainstone with logic to support PCMCIA
attachment (IRQs, status regs).
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
First, sysbus_init_irq shan't be called on on-stack variables. Indeed,
it only stores a passed pointer in qdev and the stored irq is later
populated, so we get a nice write-to-stack bug.
Second, irq for pxa27x should probably be handled in a more gentler way,
as we should check if we have events to raise this irq.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
This patch adds support for the following two BSPs:
- LM32 EVR32 BSP (as used by RTEMS)
- uclinux BSP by Theobroma Systems
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds helper functions to create a ROM, which contains a hardware
description of a board. This is used in Theobromas LM32 Linux port.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch add support for a system control block. It is supposed to
act as helper for the emulated program. E.g. shutting down the VM or
printing test results. This model is intended for testing purposes only and
doesn't fit to any real hardware. Therefore, it is not added to any board
by default. Instead a user has to add it explicitly with the '-device'
commandline parameter.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch add support for the LatticeMico32 UART.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for the LatticeMico32 system timer.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds init functions for the PIC and JTAG UART commonly used
in the board initialization.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds the JTAG UART model. It is accessed through special control
registers and opcodes. Therefore the translation uses callbacks to this
model.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds the interrupt controller of the lm32. Because the PIC is
accessed through special control registers and opcodes, there are callbacks
from the lm32 translation code to this model.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Integrate secondary CPU reset into arm_boot, removing it from realview.c.
On non-Linux systems secondary CPUs start with the same entry as the boot
CPU.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix selection of target list filter mode.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
It was migrating the wrong structures, no way it would work
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
It was migrating the wrong structures, no way it would work
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
sd_set_cb() calls bdrv_is_read_only() and bdrv_is_inserted() even if
no block driver is associated with the card reader.
This patch fixes the issues by not setting the irq in this case, this
fixes ARM versatile crash.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instantiate the three PL061 GPIO modules the realview boards have.
Connect the MMC card status outputs of the PL181 MMC controller
to both the system registers and the GPIO module which handles
internal devices.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a qemu_irq_split() function which allows a board to wire a single
GPIO output up to two GPIO inputs. This is needed for realview boards,
where the MMC card status is visible both in a system register and
via a PL061 GPIO module.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
ARM's PL061 has a different set of ID registers to the one in the
Luminary Stellaris; implement this so that the Linux driver can
identify the Realview PBX PL061 correctly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement some GPIO inputs which a board can connect up to set the
MMC card status bits in the MCI register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add two GPIO output pins to the PL181 model to indicate the card
present and readonly status information. On ARM boards these usually
are reflected in a system register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Update not only dbc but also dnad when skipping bytes during the MSGOUT
phase. Previously only dbc was updated which is probably wrong and
could lead to bogus message codes being read.
Tested on Linux and Windows Server 2003.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
bugfix under DOS for AMD netware driver:
AMD PCNTNW Ethernet MLID v3.10 (960115), network card not found
bugfix works well under DOS with:
1.) AMD NDIS driver v2.0.1
2.) AMD PCNTNW Ethernet MLID v3.10 (960115)
3.) Knoppix 6.2
Signed-off-by: Gerhard Wiesinger <lists@wiesinger.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
A pointer to a size_t variable was passed as the void * pointer to
lduw_p() in virtio_net_receive(). Instead of acting on the 16-bit value
this caused failure on big-endian hosts.
Avoid this issue in the future by using stw_p() instead. In general we
should use ld*_p() for loading from target memory and st*_p() for
storing to target memory anyway, not the other way around.
Also tighten up a correct use of lduw_p() when stw_p() should be used
instead in virtio_net_get_config().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
VMSTATE_PCIE_AER_ERRS is indeed useful for other emulation drivers.
Move it to hw/hw.h under the name of VMSTATE_STRUCT_VARRAY_POINTER_UINT16.
Also add VMSTATE_STRUCT_VARRAY_POINTER_INT32 which is more or less
the same as _UINT16 macro, except the fact it uses int32_t internally.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
It should be PXA2xxTimerInfo, not pxa2xx_timer_info. Replace all
occurences of old name with the new one.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
This is a _TEST variant of VMSTATE_STRUCT_ARRAY, necessary e.g.
for future patch changing pxa2xx_timer to use vmstate.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Use qdev/sysbus framework to handle pxa2xx-pic. Instead of exposing IRQs
via array, reference them via qdev_get_gpio_in().
Patch has been modified by the committer.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Final corrections for IRQ levels that are set by mst_fpga:
* Don't retranslate IRQ if previously IRQ was masked.
* After setting or clearing IRQs through register, apply mask
before setting parent IRQ level.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
VirtIOSerialDevice is like VirtIOSerialPort with just the first two
fields, which makes it pretty pointless. Using VirtIOSerialPort
directly works equally well and is less confusing.
[Amit: - rebase
- rename 'dev' to 'port' in function params in virtio-serial.h ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The SD_STATUS and SEND_NUM_WR_BLOCKS commands are supposed to cause
the card to send data back to the host. However sd.c was missing the
state change to sd_sendingdata_state for these commands, with the effect
that the Linux driver would either hang indefinitely waiting for
nonexistent data (pl181) or read zeroes and provoke a qemu warning
message (omap).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove the typedef SetIRQFunc, as it is not used by anything.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Nothing prevented IRQ sharing on the ISA bus in principle. Not all
boards supported this, neither each and every card nor driver and OS.
Still, there existed valid IRQ sharing scenarios, (at least) two of them
can also be found in QEMU: >2 PC UARTs and the PREP IDE buses.
So remove this artificial restriction from our ISA model.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The following patch adds PS/2 keyboard Scancode Set 3 support.
Signed-off-by: Roy Tam <roytam@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
RST bit is (1 << 4) bit, not (1 << 3), fix condition
that enables i2s if ENB is set and RST is not set.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add handling of 0xe0xx keycodes to pxa2xx_driver.
Extended keycodes in keymap should be marked with most significant
bit set (i.e. 0x80). Without this patch it's not possible to handle
i.e. cursor keys.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add emulation of KPAS register and proper emulation of
KPASMKP regs, so now driver supports multipresses and properly
works with Linux driver.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Acked-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
qemu makes it possible to disable link at tap which is not communicated
to the guest but causes all packets to be dropped.
When vhost-net is enabled, vhost needs to be aware of both the virtio
link_down and the peer link_down. we switch to userspace emulation when
either is down.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: pradeep <psuriset@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The spec says: Any descriptor with a non-zero status byte has been
processed by the hardware, and is ready to be handled by the software.
Thus, once we change a descriptor status to non-zero we should
never move the head backwards and try to reuse this
descriptor from hardware.
This actually happened with a multibuffer packet
that arrives when we don't have enough buffers.
Fix by checking that we have enough buffers upfront
so we never need to discard the packet midway through.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The e1000 spec says: if software statically allocates
buffers, and uses memory read to check for completed descriptors, it
simply has to zero the status byte in the descriptor to make it ready
for reuse by hardware. This is not a hardware requirement (moving the
hardware tail pointer is), but is necessary for performing an in–memory
scan.
Thus the guest does not have to clear the status byte. In case it
doesn't we need to clear EOP for all descriptors
except the last. While I don't know of any such guests,
it's probably a good idea to stick to the spec.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
e1000 supports multi-buffer packets larger than rxbuf_size.
This fixes the following (on linux):
- in guest: ifconfig eth1 mtu 16110
- in host: ifconfig tap0 mtu 16110
ping -s 16082 <guest-ip>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Turn fdc_init_isa into an inline function.
Get floppy geometry directly from the drives.
Don't expose FDCtrl.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Other geometry guessing functions already reside in block.c.
Remove some unused or debugging only fields.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
