Add a new mmu fault handler for the POWER9 cpu and add it as the handler
for the POWER9 cpu definition.
This handler checks if the guest is radix or hash based on the value in the
partition table entry and calls the correct fault handler accordingly.
The hash fault handling code has also been updated to check if the
partition is using segment tables.
Currently only legacy hash (no segment tables) is supported.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
POWER9 doesn't have a storage description register 1 (SDR1) which is used
to store the base and size of the hash table. Thus we don't need to
generate this register on the POWER9 cpu model. While we're here, the
register generation code for 970, POWER5+, POWER<7/8/9> in general is a
mess where we call a generic function from a model specific function which
then attempts to call model specific functions, so rework this for
readability.
We update ppc_cpu_dump_state so that "info registers" will only display
the value of sdr1 if the register has been generated.
As mentioned above the register generation for the pcc->init_proc
function for 970, POWER5+, POWER7, POWER8 and POWER9 has been reworked
for improved clarity. Instead of calling init_proc_book3s_64 which then
attempts to generate the correct registers through a mess of if statements,
we remove this function and instead call the appropriate register
generation functions directly. This follows the register generation model
used for earlier cpu models (pre-970) whereby cpu specific registers are
generated directly in the init_proc function and makes it easier to
add/remove specific registers for new cpu models.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ISA v3.00 adds the idea of a partition table which is used to store the
address translation details for all partitions on the system. The partition
table consists of double word entries indexed by partition id where the second
double word contains the location of the process table in guest memory. The
process table is registered by the guest via a h-call.
We need somewhere to store the address of the process table so we add an entry
to the sPAPRMachineState struct called patb_entry to represent the second
doubleword of a single partition table entry corresponding to the current
guest. We need to store this value so we know if the guest is using radix or
hash translation and the location of the corresponding process table in guest
memory. Since we only have a single guest per qemu instance, we only need one
entry.
Since the partition table is technically a hypervisor resource we require that
access to it is abstracted by the virtual hypervisor through the get_patbe()
call. Currently the value of the entry is never set (and thus
defaults to 0 indicating hash), but it will be required to both implement
POWER9 kvm support and tcg radix support.
We also add this field to be migrated as part of the sPAPRMachineState as we
will need it on the receiving side as the guest will never tell us this
information again and we need it to perform translation.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For easier handling of future processors using the POWER9 or something
close to it, add a new bit in the MMU model. This was originally from a
revised version of 86cf1e9 "target/ppc/POWER9: Add ISAv3.00 MMU definition"
but the older version of the patch was already merged. This makes the
change on top of the original version.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A couple of tests for the work-in-progress 'powernv' machine type attempt
to test on POWER9 CPUs. However the POWER9 CPU support is incomplete and
this doesn't really work. In particular the firmware image we have
currently assumes the presence of the SDR1 register, which no longer exists
on POWER9. We only got away with this so far, because of a different bug
which added SDR1 to POWER9 even though it shouldn't be there.
For now, remove POWER9 testing of powernv, POWER8 testing will do for now
until the POWER9 support is more complete.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
getrampagesize() returns the largest supported page size and mainly
used to know if huge pages are enabled.
However is implemented in target-ppc/kvm.c and not available
in TCG or other architectures.
This renames and moves gethugepagesize() to mmap-alloc.c where
fd-based analog of it is already implemented. This renames and moves
getrampagesize() to exec.c as it seems to be the common place for
helpers like this.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
compat_table contains the list of logical pvr compat modes which a cpu can
operate in. It is a list of struct CompatInfo which contains the given pvr
value for a compat mode, the pcr bits which should be set to operate in
that compat mode, the pcr level which must be present in pcr_supported for
a processor to support that compat mode and the max threads possible in
that compat mode.
Add an entry for the POWER9/ISAv3.00 logical pvr which represents a
processor running with support for logical pvr 0x0f000005. A processor
running in this mode should have PCR_COMPAT_3_00 set in the pcr (if
available in pcr_mask) and should have PCR_COMPAT_3_00 in pcr_supported
to indicate that it is capable of running in this compat mode.
Also add PCR_COMPAT_3_00 to the bits which must be set for all previous
compat modes. Since no processor models contain this bit yet in pcr_mask
it will never be set, but this ensures we don't forget to in the future.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Note: The 'postcopy: Update userfaultfd.h header' is part of
Paolo's header update and will disappear if applied after it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=PCYv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170228a' into staging
Migration pull
Note: The 'postcopy: Update userfaultfd.h header' is part of
Paolo's header update and will disappear if applied after it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Tue 28 Feb 2017 12:38:34 GMT
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20170228a: (27 commits)
postcopy: Add extra check for COPY function
postcopy: Add doc about hugepages and postcopy
postcopy: Check for userfault+hugepage feature
postcopy: Update userfaultfd.h header
postcopy: Allow hugepages
postcopy: Send whole huge pages
postcopy: Mask fault addresses to huge page boundary
postcopy: Load huge pages in one go
postcopy: Use temporary for placing zero huge pages
postcopy: Plumb pagesize down into place helpers
postcopy: Record largest page size
postcopy: enhance ram_block_discard_range for hugepages
exec: ram_block_discard_range
postcopy: Chunk discards for hugepages
postcopy: Transmit and compare individual page sizes
postcopy: Transmit ram size summary word
migration: fix use-after-free of to_dst_file
migration: Update docs to discourage version bumps
migration: fix id leak regression
migrate: Introduce a 'dc->vmsd' check to avoid segfault for --only-migratable
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I was hoping to get this pull request squeezed in before the soft
freeze, but I ran into some difficulties during testing. Everything
here was at least posted before the soft freeze, so I'm hoping we can
still merge it for 2.9.
The biggest things here are:
* Cleanups to handling of hashed page tables, that will make
adding support for the POWER9 MMU easier
* Cleanups to the XICS interrupt controller that will make
implementing the powernv machine easier
* TCG implementation of extended overflow and carry handling for
POWER9
It also includes:
* Increasing the CPU limit for pseries to 1024 vCPUs
* Generating proper OF node names in qemu (making hotplug and
coldplug logic closer together)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=gI0E
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170301' into staging
ppc patch queue for 2017-03-01
I was hoping to get this pull request squeezed in before the soft
freeze, but I ran into some difficulties during testing. Everything
here was at least posted before the soft freeze, so I'm hoping we can
still merge it for 2.9.
The biggest things here are:
* Cleanups to handling of hashed page tables, that will make
adding support for the POWER9 MMU easier
* Cleanups to the XICS interrupt controller that will make
implementing the powernv machine easier
* TCG implementation of extended overflow and carry handling for
POWER9
It also includes:
* Increasing the CPU limit for pseries to 1024 vCPUs
* Generating proper OF node names in qemu (making hotplug and
coldplug logic closer together)
# gpg: Signature made Wed 01 Mar 2017 04:43:06 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170301: (50 commits)
Add PowerPC 32-bit guest memory dump support
ppc/xics: rename 'ICPState *' variables to 'icp'
ppc/xics: move InterruptStatsProvider to the sPAPR machine
ppc/xics: move ics-simple post_load under the machine
ppc/xics: remove the XICSState classes
ppc/xics: export the XICS init routines
ppc/xics: move the ICP array under the sPAPR machine
ppc/xics: register the reset handler of ICP objects
ppc/xics: simplify spapr_dt_xics() interface
ppc/xics: use the QOM interface to grab an ICP
ppc/xics: move the cpu_setup() handler under the ICPState class
ppc/xics: simplify the cpu_setup() handler
ppc/xics: move kernel_xics_fd out of KVMXICSState
ppc/xics: extend the QOM interface to handle ICPs
ppc/xics: remove the XICS list of ICS
ppc/xics: register the reset handler of ICS objects
ppc/xics: remove xics_find_source()
ppc/xics: use the QOM interface to resend irqs
ppc/xics: use the QOM interface to get irqs
ppc/xics: use the QOM interface under the sPAPR machine
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"-cpu max" and query-cpu-model-expansion support for x86. This
should be the last x86 pull request before 2.9 soft freeze.
-----BEGIN PGP SIGNATURE-----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=KPbC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
x86 queue, 2017-02-27
"-cpu max" and query-cpu-model-expansion support for x86. This
should be the last x86 pull request before 2.9 soft freeze.
# gpg: Signature made Mon 27 Feb 2017 16:24:15 GMT
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
i386: Improve query-cpu-model-expansion full mode
i386: Implement query-cpu-model-expansion QMP command
i386: Define static "base" CPU model
i386: Don't set CPUClass::cpu_def on "max" model
i386: Make "max" model not use any host CPUID info on TCG
i386: Create "max" CPU model
qapi-schema: Comment about full expansion of non-migration-safe models
i386: Reorganize and document CPUID initialization steps
i386: Rename X86CPU::host_features to X86CPU::max_features
i386: Add ordering field to CPUClass
i386: Unset cannot_destroy_with_object_finalize_yet on "host" model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=g3ew
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Tue 28 Feb 2017 20:35:32 GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (46 commits)
block: Add Error parameter to bdrv_append()
block: Add Error parameter to bdrv_set_backing_hd()
block: Assertions for resize permission
block: Assertions for write permissions
block: Pass BdrvChild to bdrv_aligned_preadv/pwritev and copy-on-read
tests: Remove FIXME comments
nbd/server: Use real permissions for NBD exports
migration/block: Use real permissions
hmp: Request permissions in qemu-io
commit: Add filter-node-name to block-commit
mirror: Add filter-node-name to blockdev-mirror
stream: Use real permissions in streaming block job
mirror: Use real permissions in mirror/active commit block job
blockjob: Factor out block_job_remove_all_bdrv()
block: Allow backing file links in change_parent_backing_link()
block: BdrvChildRole.attach/detach() callbacks
block: Fix pending requests check in bdrv_append()
backup: Use real permissions in backup block job
commit: Use real permissions for HMP 'commit'
commit: Use real permissions in commit block job
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes the booting of ss20 roms.
Cc: qemu-stable@nongnu.org
Reported-by: Michael Russo <mike@papersolve.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
* raspi2: add gpio controller and sdhost controller, with
the wiring so the guest can switch which controller the
SD card is attached to
(this is sufficient to get raspbian kernels to boot)
* GICv3: support state save/restore from KVM
* update Linux headers to 4.11
* refactor and QOMify the ARMv7M container object
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJYta9VAAoJEDwlJe0UNgzeMVoQAJXv3EEcz8mfHQXGbjoak7Md
RLwgsf2RRnjK9VsrXZuaH81FzpIUHpx3tV/w74w+VqOOUEo2g3QCv6kakZ2UYfS+
tsf3FgNyX/z/OzNcOaxn6CzBLpHATOWsFZSPVf3FPh81ytUaB2tf3BJZR845cVIe
0Yh+4klw2mYVMOX4UExyOrmifW58eQRKS3MFQTsKqchbOGdsQpCCnMCj5WhHC+rY
tRQg1542/0seS3pY55Qpi6Q080ePky6AJQc672vPIqd2bDN/klGhmPpZIPokXn95
vgjZe1/mdhcSX2xnUFiNyOBijjW7yUsL1Dx3LuoPH7tDqVsl3NWhJuhhfoSau1dY
suPuckqrqTPz1AwFML0NN+lQLlH/6pfV2ZeRQJSf6bEhVBBjcyeCzy3vrRRmQqrc
N2I9/4vCR22Yp+zIhGBwtNkgL3DVZFeiMQRwDe6lzMJhZOQ9Wz04bXHnEmo3Ht62
AZ9IUQBc+mgoPlmJXAo6Jia7AVZ0x+Nwoa1okoptywXAOpIHazpAuW04vvjgpBy3
VdcRqlDluv5azqHPmS26Adt54fZ21OkARKizE3kGOY47fJtMrOg+JK1AjvX3D/Iq
t2yjYdF1zN7JfkJzDZKuvmSsnovTfiIeTATkD49E5zaU0inBt6eqSihZwKQmY3SY
MzNb8mv8E7KraMw5HaWh
=IC84
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170228-1' into staging
target-arm queue:
* raspi2: add gpio controller and sdhost controller, with
the wiring so the guest can switch which controller the
SD card is attached to
(this is sufficient to get raspbian kernels to boot)
* GICv3: support state save/restore from KVM
* update Linux headers to 4.11
* refactor and QOMify the ARMv7M container object
# gpg: Signature made Tue 28 Feb 2017 17:11:49 GMT
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20170228-1: (21 commits)
bcm2835: add sdhost and gpio controllers
bcm2835_gpio: add bcm2835 gpio controller
hw/sd: add card-reparenting function
qdev: Have qdev_set_parent_bus() handle devices already on a bus
hw/intc/arm_gicv3_kvm: Reset GICv3 cpu interface registers
target-arm: Add GICv3CPUState in CPUARMState struct
hw/intc/arm_gicv3_kvm: Implement get/put functions
hw/intc/arm_gicv3_kvm: Add ICC_SRE_EL1 register to vmstate
update Linux headers to 4.11
update-linux-headers: update for 4.11
stm32f205: Rename 'nvic' local to 'armv7m'
stm32f205: Create armv7m object without using armv7m_init()
armv7m: Split systick out from NVIC
armv7m: Don't put core v7M devices under CONFIG_STELLARIS
armv7m: Make bitband device take the address space to access
armv7m: Make NVIC expose a memory region rather than mapping itself
armv7m: Make ARMv7M object take memory region link
armv7m: Use QOMified armv7m object in armv7m_init()
armv7m: QOMify the armv7m container
armv7m: Move NVICState struct definition into header
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When compiling with SDL2, the semaphore trick used in sdlaudio.c
does not work - QEMU locks up completely in this case. To avoid
the hang and get at least some audio playback up and running (it's
a little bit crackling, but better than nothing), we can use the
SDL locking functions SDL_LockAudio() and SDL_UnlockAudio() to sync
with the sound playback thread instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1485852398-2327-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch changes resetting strategy of the audio polling timer.
It does not change expiration time if the timer is already set.
This patch is needed to make this timer deterministic and to use execution
record/replay for audio devices.
audio_reset_timer is used in the function audio_vm_change_state_handler.
Therefore every time VM is stopped or restarted the timer will be reset
to new timeout. Virtual clock does not proceed while VM is stopped.
Therefore there is no need in resetting the timeout when VM restarts.
v2: updated commit message
v3: now using timer_mod_anticipate function (as suggested by Yurii Zubrytskyi)
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-id: 20170214071510.6112.76764.stgit@PASHA-ISP
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds recording and replaying audio data. Is saves synchronization
information for audio out and inputs from the microphone.
v2: removed unneeded whitespace change
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-id: 20170202055054.4848.94901.stgit@PASHA-ISP.lan02.inno
[ kraxel: add qemu/error-report.h include to fix osx build failure ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These are very much like the sample configuration files
for q35, and can be used both as documentation and as
a starting point for creating your own guest.
Two sample configuration files are provided:
* mach-virt-graphical.cfg can be used to start a
fully-featured (USB, graphical console, etc.)
guest that uses VirtIO devices;
* mach-virt-serial.cfg is similar but has a minimal
set of devices and uses the serial console.
All configuration files are fully commented and neatly
organized.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1487326479-8664-3-git-send-email-abologna@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead of having a single sample configuration file,
we now have several:
* q35-emulated.cfg documents the default devices QEMU
adds to a q35 guest and the additional devices that
are pretty much guaranteed to be present in a
physical q35-based machine;
* q35-virtio-graphical.cfg can be used to start a
fully-featured (USB, graphical console, audio, etc.)
guest that uses VirtIO instead of emulated devices;
* q35-virtio-serial.cfg is similar but has a minimal
set of devices and uses the serial console.
All configuration files are fully commented and neatly
organized.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Message-id: 1487326479-8664-2-git-send-email-abologna@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Version: GnuPG v2
iQEtBAABCAAXBQJYtW+gEBxmYW16QHJlZGhhdC5jb20ACgkQyjViTGqRccagwgf/
QjBnAloOFjDYDKN328CHMwB6tuhkjqv5XrTm5UXz9SIW+x/pIHPIG7monxTVAfUa
rjUwN5HlP2lcsuXBuuEIi0xStqFbcjpuLeKNP/TCBcYusJ0DT7Rqi/gU3mGGLzSZ
MTnzGDQIc0lsRwxkXLFlnkaAhd237+9KofSqg/Ohel1k1gLrT0hQlQpnsMOk7eag
ihn2zgzgJ6d04DuD/oRTpW4hd7WezfgCPNmc7BvZNb1tbxjBwP3TmnF49ZGL0z1p
SGx5ym+yBVoP6cnB0cXIuWeKIRgIpGaBefg8ksqbRkJf6ExXrBcgi2VIvdNq+HZ7
BMdVCUYDv5kQi6JpkQpwAg==
=5cxL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/docker-pull-request' into staging
# gpg: Signature made Tue 28 Feb 2017 12:40:00 GMT
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/docker-pull-request:
.shippable: add s390x-cross target
new: dockerfiles/debian-s390-cross
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use qvirtio_pci_device_find_slot() to avoid leaking the non-hp
device. Add assert() to avoid further leaks in the future.
Use qvirtio_pci_device_free() to correctly free QVirtioPCIDevice.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow specifying which slot to look for the device.
This will be used in the following patch to avoid leaking when multiple
devices exists and we want to lookup the hotplug one.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
pci_init() shouldn't be a test function, but instead called before any
test. This allows to run a single test with -p /x86_64/ehci/....
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Apparently, none of the bus owner give a reference to the hotplug
handler property, do not unref it on bus release.
Furthermore, a bus is allowed to be its own hotplug handler, which can
be seen in qbus_set_bus_hotplug_handler() function. However, in this
case, the reference can't be given to the property, or this will create
a cyclic dependency and the bus will never be free.
Each bus owner should manage the lifecycle of the hotplug handler.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Spotted by ASAN.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Spotted by ASAN.
This hunk adds an assertion. It checks that we're finding no more than
one e1000e device: each hit allocates, but there is only one g_free().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
PCI hotplug for bridges was introduced only since 2.0 however
acpi_set_bsel()->object_property_add_uint32_ptr(bus, ACPI_PCIHP_PROP_BSEL)
didn't take in account that for legacy mode (1.7) when
PCI hotplug for bridges is unavailable and ACPI_PCIHP_PROP_BSEL property
the only bus "PCI.0' has been created earlier at acpi_pcihp_init() time.
We managed to live with it only because of error rised by adding
a duplicate property in acpi_set_bsel() has been ignored which
resulted in useless leaking of just allocated (int)bus_bsel.
Issue affects only 1.7 machine type as ACPI tables supported by
QEMU were introduced at that time, but there wasn't PCI hotplug
for bridges till the next release (2.0).
Fix it by removing duplicate ACPI_PCIHP_PROP_BSEL intialization
in acpi_pcihp_init() and doing it only in one place acpi_set_pci_info().
PS:
do not ignore error returned by object_property_add_uint32_ptr()
and abort QEMU since it's programming error which should be fixed
instead of being ignored.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1470211497-116801-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ Marc-André - Remove now unused ACPI_PCIHP_LEGACY_SIZE ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The inside array should be free too.
Spotted by ASAN.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This patch extends support for the `dump-guest-memory` command to the
32-bit PowerPC architecture. It relies on the assumption that a 64-bit
guest will not dump a 32-bit core file (and vice versa).
[dwg: I suspect this patch won't cover all cases, in particular a
32-bit machine type on a 64-bit qemu build. However, it does strictly
more than what we had before, so might as well apply as a starting
point]
Signed-off-by: Mike Nawrocki <michael.nawrocki@gtri.gatech.edu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
