This adds the MMU indices for EL2 stage 1 in secure state.
To keep code contained, which is largelly identical between secure and
non-secure modes, the MMU indices are reassigned. The new assignments
provide a systematic pattern with a non-secure bit.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-8-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the ARMv8.4-SEL2 extension, EL2 is a legal exception level in
secure mode, though it can only be AArch64.
This patch adds the target EL for exceptions from 64-bit S-EL2.
It also fixes the target EL to EL2 when HCR.{A,F,I}MO are set in secure
mode. Those values were never used in practice as the effective value of
HCR was always 0 in secure mode.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-7-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-6-remi.denis.courmont@huawei.com
[PMM: tweaked commit message to match reduced scope of patch
following rebase]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a common helper to compute the effective value of MDCR_EL2.
That is the actual value if EL2 is enabled in the current security
context, or 0 elsewise.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-5-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will simplify accessing HCR conditionally in secure state.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-4-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not assume that EL2 is available in and only in non-secure context.
That equivalence is broken by ARMv8.4-SEL2.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-3-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This checks if EL2 is enabled (meaning EL2 registers take effects) in
the current security context.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-2-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In this context, the HCR value is the effective value, and thus is
zero in secure mode. The tests for HCR.{F,I}MO are sufficient.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-1-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The interface for object_property_add_bool is simpler,
making the code easier to understand.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The crypto overhead of emulating pauth can be significant for
some workloads. Add two boolean properties that allows the
feature to be turned off, on with the architected algorithm,
or on with an implementation defined algorithm.
We need two intermediate booleans to control the state while
parsing properties lest we clobber ID_AA64ISAR1 into an invalid
intermediate state.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-3-richard.henderson@linaro.org
[PMM: fixed docs typo, tweaked text to clarify that the impdef
algorithm is specific to QEMU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without hardware acceleration, a cryptographically strong
algorithm is too expensive for pauth_computepac.
Even with hardware accel, we are not currently expecting
to link the linux-user binaries to any crypto libraries,
and doing so would generally make the --static build fail.
So choose XXH64 as a reasonably quick and decent hash.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Next pull request for qemu-6.0. Not a huge amount here, but it does
have some important fixes from Greg Kurz. Includes:
* A number of minor cleanups from Daniel Barboza (preliminaries for
some hotplug changes that are still under review)
* Improved handling of memory hotplug from Greg Kurz
* A number of fixes for sam460ex and other 440 based platforms from
Zolan Balaton
* Some fixes for the QOMification of the PPC 4xx UIC interrupt
controller from Peter Maydell
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAmAGerUACgkQbDjKyiDZ
s5LjYQ/+M3OYOrvy8thPINm+s5oeJbeCVlavLK9KY4STGzow9HgI0Kl0BkfviK5y
X5kLdIWTXTW6SmNUa1Y45kEc2L5wxbXERHGk5WkfoMte0DycOFsWmwdmtAfGKQEI
R31+Aj5U/tI+JgtvzlFpHyAqXPzzpLUmnHi9PesD70yU/30FdtI1ZNOA3fRYhN9b
iyBubp340Hy4dWSofGYe4L8ieznmNsIDFVsrcj4jzyp0bSNMPPWgqkHAKHmRST6Q
wcCQCA8hh5T93JPov/W1q0WB+zB0/LGoNLnqh87sH54CL2QwarYJSKMXjl4nsSfY
IRkUO/PW+a+52JHhaACO2aq/qzsNOD/j+8/RE4KBds7wG2XYCY9j3hH0NtcAkHdz
M2odtjHYAW3wFBaaoqff76N/MxDd9WJxc222uBunoJLYumRk3XF1e83cwGRsDpTH
Vu3O6o4/JhBoon0U52+xTFzdRq5rxwaFdwD+YRTTxycgs6v3tENDnTh+USOQezEq
F2W+ESez/7L+HDxUfXs3Lp+RGRyE9aNgeJMfhIyoBY+8n0APZCNz+CwPuqQMxCqi
IVb2FMj9duuXfFNt4ubpmtb0nW9wSikWhxQCvhQKxiYfCesv6mvNEXwcqPtt/Ph5
MR1pT45GykYoDrVrZ4sUfxxOGSrFHoxmslZDRSaSXVBWIzF6JIw=
=pkwx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210119' into staging
ppc patch queue 2021-01-19
Next pull request for qemu-6.0. Not a huge amount here, but it does
have some important fixes from Greg Kurz. Includes:
* A number of minor cleanups from Daniel Barboza (preliminaries for
some hotplug changes that are still under review)
* Improved handling of memory hotplug from Greg Kurz
* A number of fixes for sam460ex and other 440 based platforms from
Zolan Balaton
* Some fixes for the QOMification of the PPC 4xx UIC interrupt
controller from Peter Maydell
# gpg: Signature made Tue 19 Jan 2021 06:22:45 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dg-gitlab/tags/ppc-for-6.0-20210119:
spapr_cpu_core.c: use g_auto* in spapr_create_vcpu()
spapr_rtas.c: fix identation of rtas_ibm_suspend_me() args
spapr_hcall.c: make do_client_architecture_support static
spapr.h: fix trailing whitespace in phb_placement
spapr: Improve handling of memory unplug with old guests
sam460ex: Use type cast macro instead of simple cast
Revert "ppc4xx: Move common dependency on serial to common option"
Revert "sam460ex: Remove FDT_PPC dependency from KConfig"
hw/ppc: Remove unused ppcuic_init()
hw/ppc/ppc405_uc: Drop use of ppcuic_init()
hw/intc/ppc-uic: Make default dcr-base 0xc0, not 0x30
hw/ppc: Delete unused ppc405cr_init() code
hw/ppc/sam460ex: Drop use of ppcuic_init()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The next-cube.h file is missing the usual copyright-and-license
header; add it (same as the next-cube.c one).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210115201206.17347-12-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Add the vmstate for the new NeXTPC devic; this is in theory
a migration compatibility break, but this machine doesn't have
working migration currently anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210115201206.17347-11-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The fields scsi_irq, scsi_dma, scsi_reset and fd_irq in
NeXTState are all unused, except in commented out
"this should do something like this" code. Remove the
unused fields. As and when the functionality that might
use them is added, we can put in the correct kind of
wiring (which might or might not need to be a qemu_irq,
but which in any case will need to be in the NeXTPC
device, not in NeXTState).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210115201206.17347-10-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move the rtc into the NeXTPC struct. Since this is the last
use of the 'backdoor' NextState pointer we can now remove that.
Probably the RTC should be its own device at some point: in hardware
there is a separate MCS1850 RTC chip connected to the Peripheral
Controller via a 1-bit serial interface. That goes beyond the remit
of the current refactoring, though.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210115201206.17347-9-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Make the next_irq function be GPIO inputs to the NEXT_PC
device, rather than a freestanding set of qemu_irq lines.
This fixes a minor Coverity issue where it correctly points
out the trivial memory leak of the memory allocated in the
call to qemu_allocate_irqs().
Fixes: CID 1421962
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210115201206.17347-8-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
All the code which accesses int_status and int_mask is now doing
so via the NeXTPC->NeXTState indirection, so we can move these
fields into the NeXTPC struct where they belong.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210115201206.17347-7-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Make the next_irq function take a NeXTPC* as its opaque rather than
the M68kCPU*. This will make it simpler to turn the next_irq
function into a gpio input line of the NeXTPC device in the next
commit.
For this to work we have to pass the CPU to the NeXTPC device via a
link property, in the same way we do in q800.c (and for the same
reason).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210115201206.17347-6-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move the registers handled by the scr_ops struct into the NeXTPC
device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210115201206.17347-5-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move the registers handled by the mmio_ops struct into the NeXTPC
device. This allows us to also move the scr1 and scr2 data fields.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210115201206.17347-4-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Currently the next-cube board code open-codes a lot of handling of
interrupts and some miscellaneous registers. Move this into a proper
QOM device.
In the real hardware this functionality seems to be the
responsibility of the Peripheral Controller (PC) chip, so name the
device that.
There are several different things that will need to be moved into
this device:
* the mmio_iops register set
* the scr_ops register set
* the next_irq IRQ handling
To ease review, we structure the change as a sequence of commits: in
this first commit we create the skeleton of the NeXTPC device with no
content, but with a backdoor pointer to the NeXTState machine's state
struct so we can move parts of the code and still have refactored and
non-refactored code using the same struct data fields. Further
commits will move functionality into the new device piece by piece.
At the end we will be able to remove the backdoor pointer because all
the data fields will be in the NeXTPC struct and not the NeXTState
struct.
We'll add the VMState for the new device at the end of all that; this
is in theory a migration compatibility break but this machine does
not currently support migration at all anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210115201206.17347-3-peter.maydell@linaro.org>
[huth: Add a comment in front of struct NeXTPC]
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The next_irq() function is global, but isn't actually used anywhere
outside next-cube.c. Make it static.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210115201206.17347-2-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Use g_autoptr() with Object and g_autofree with the string to
avoid the need of a cleanup path.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210114180628.1675603-6-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The function is called only inside spapr_hcall.c.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210114180628.1675603-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This whitespace was messing with lots of diffs if you happen
to use an editor that eliminates trailing whitespaces on file
save.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210114180628.1675603-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit 1e8b5b1aa1 ("spapr: Allow memory unplug to always succeed")
trying to unplug memory from a guest that doesn't support it (eg. rhel6)
no longer generates an error like it used to. Instead, it leaves the
memory around : only a subsequent reboot or manual use of drmgr within
the guest can complete the hot-unplug sequence. A flag was added to
SpaprMachineClass so that this new behavior only applies to the default
machine type.
We can do better. CAS processes all pending hot-unplug requests. This
means that we don't really care about what the guest supports if
the hot-unplug request happens before CAS.
All guests that we care for, even old ones, set enough bits in OV5
that lead to a non-empty bitmap in spapr->ov5_cas. Use that as a
heuristic to decide if CAS has already occured or not.
Always accept unplug requests that happen before CAS since CAS will
process them. Restore the previous behavior of rejecting them after
CAS when we know that the guest doesn't support memory hot-unplug.
This behavior is suitable for all machine types : this allows to
drop the pre_6_0_memory_unplug flag.
Fixes: 1e8b5b1aa1 ("spapr: Allow memory unplug to always succeed")
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <161012708715.801107.11418801796987916516.stgit@bahia.lan>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use the PCI_BUS type cast macro to convert result of qdev_get_child_bus().
Also remove the check for NULL afterwards which should not be needed
because sysbus_create_simple() uses error_abort and we create the PCI
host object here that's expected to have a PCI bus so this shouldn't
fail. Even if it would fail that would be due to a programmer error so
an error message is not necessary.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <a4dc55b56eed3ce899b7bf9835b980a114c52598.1610143658.git.balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This reverts commit e6d5106786 which was added mistakenly. While this
change works it was suggested during review that keeping dependencies
explicit for each board may be better than listing them in a common
option so keep the previous version and revert this change.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <8c65807fc7dc1c4c4f6320f2fd6409a3091c88ff.1610143658.git.balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This reverts commit 038da2adf that was mistakenly added, this
dependency is still needed to get libfdt dependencies even if fdt.o is
not needed by sam460ex.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <15a9fa72eed4f02bdbeaef206803d5e22260e2de.1610143658.git.balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now we've converted all the callsites to directly create the QOM UIC
device themselves, the ppcuic_init() function is unused and can be
removed. The enum defining PPCUIC symbolic constants can be moved
to the ppc-uic.h header where it more naturally belongs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20210108171212.16500-5-peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Switch the ppc405_uc boards to directly creating and configuring the
UIC, rather than doing it via the old ppcuic_init() helper function.
We retain the API feature of ppc405ep_init() where it passes back
something allowing the callers to wire up devices to the UIC if
they need to, even though neither of the callsites currently makes
use of this ability -- instead of passing back the qemu_irq array
we pass back the UIC DeviceState.
This fixes a trivial Coverity-detected memory leak where
we were leaking the array of IRQs returned by ppcuic_init().
Fixes: Coverity CID 1421922
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210108171212.16500-4-peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In commit 34d0831f38 the ppc-uic device was added, with a dcr-base
property. The intention was that the default value of dcr-base should be
the one that most of our boards need, so that in the common case they
don't need to specify a property value.
All QEMU boards with a UIC use a dcr-base of 0xc0, with the exception of
sam460ex which has four UICs and so puts them at 0xc0, 0xd0, 0xe0, 0xf0.
So 0xc0 is the obvious right choice for the default dcr-base.
The board code conversions in commits 0270d74ef8 (bamboo) and
c5ac9dc64f (virtex_ml507) assumed that default was 0xc0. Unfortunately
the actual default in 34d0831f38 was 0x30, by mistake, so the
bamboo and virtex_ml507 boards were broken as they were converted
away from ppcuic_init() (which always specifies the dcr_base property
value explicitly).
Set the default dcr-base to 0xc0 as was intended, fixing bamboo and
virtex_ml507.
Fixes: 34d0831f38
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210111213007.7381-1-peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The function ppc405cr_init() has apparently been unused since it was
added in commit 8ecc791352 in 2007.
Remove this dead code, so we don't have to convert it away from using
ppcuic_init().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210108171212.16500-3-peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Switch the sam460ex board to directly creating and configuring the
UIC, rather than doing it via the old ppcuic_init() helper function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210108171212.16500-2-peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- clean-ups to docker images
- drop duplicate jobs from shippable
- prettier tag generation (+gtags)
- generate browsable source tree
- more Travis->GitLab migrations
- fix checkpatch to deal with commits
- gate gdbstub tests on 8.3.1, expand tests
- support Xfer:auxv:read gdb packet
- better gdbstub cleanup
- use GDB's SVE register layout
- make arm-compat-semihosting common
- add riscv semihosting support
- add HEAPINFO, ELAPSED, TICKFREQ, TMPNAM and ISERROR to semihosting
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmAFXkcACgkQ+9DbCVqe
KkSP7Af/YNU4dWFf/N9CwvKQTSoJmBrO77HXccOJyYDS62hA8eoh83HWNll+xMV7
GxJDwQs0GS8J3oqcq1DktGgTUkCNxUfbHROjI2YXfRzoWnl0PFHY+Z/qRsq+bRhX
C3CiNCS/nM/NW2Q+H6TAD1MnXkia11+hqFhXrBRKVDON83MSvm0AspS5RO5eVpxo
TUTOD1YND+tAPWi5xAN+NyDuvfoY3tG4S4/DFUrHQfpS7uaHY/4qe8gMmJczveeo
uzJln9M7+pV5cgUWwr1fgCkbSyGgra+KX3GNoLIGS34C88cKRXAp7ZF19A3wQpiy
LXljmOinLfKuJqeRGwcnt6f8GrTn7A==
=XR0h
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-180121-2' into staging
Testing, gdbstub and semihosting patches:
- clean-ups to docker images
- drop duplicate jobs from shippable
- prettier tag generation (+gtags)
- generate browsable source tree
- more Travis->GitLab migrations
- fix checkpatch to deal with commits
- gate gdbstub tests on 8.3.1, expand tests
- support Xfer:auxv:read gdb packet
- better gdbstub cleanup
- use GDB's SVE register layout
- make arm-compat-semihosting common
- add riscv semihosting support
- add HEAPINFO, ELAPSED, TICKFREQ, TMPNAM and ISERROR to semihosting
# gpg: Signature made Mon 18 Jan 2021 10:09:11 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-misc-180121-2: (30 commits)
semihosting: Implement SYS_ISERROR
semihosting: Implement SYS_TMPNAM
semihosting: Implement SYS_ELAPSED and SYS_TICKFREQ
riscv: Add semihosting support for user mode
riscv: Add semihosting support
semihosting: Support SYS_HEAPINFO when env->boot_info is not set
semihosting: Change internal common-semi interfaces to use CPUState *
semihosting: Change common-semi API to be architecture-independent
semihosting: Move ARM semihosting code to shared directories
target/arm: use official org.gnu.gdb.aarch64.sve layout for registers
gdbstub: ensure we clean-up when terminated
gdbstub: drop gdbserver_cleanup in favour of gdb_exit
gdbstub: drop CPUEnv from gdb_exit()
gdbstub: add support to Xfer:auxv:read: packet
gdbstub: implement a softmmu based test
Revert "tests/tcg/multiarch/Makefile.target: Disable run-gdbstub-sha1 test"
configure: gate our use of GDB to 8.3.1 or above
test/guest-debug: echo QEMU command as well
scripts/checkpatch.pl: fix git-show invocation to include diffstat
gitlab: migrate the minimal tools and unit tests from Travis
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/targets/riscv32-linux-user.mak
# default-configs/targets/riscv64-linux-user.mak
When running device-introspect-test, a memory leak occurred in the mos6522_init
function, this patch use timer_free() in the finalize function to fix it.
ASAN shows memory leak stack:
Direct leak of 96 byte(s) in 2 object(s) allocated from:
#0 0xfffd5fe9e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0)
#1 0xfffd5f7b6800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800)
#2 0xaaae50303d0c in timer_new_full qemu/include/qemu/timer.h:523
#3 0xaaae50303d0c in timer_new qemu/include/qemu/timer.h:544
#4 0xaaae50303d0c in timer_new_ns qemu/include/qemu/timer.h:562
#5 0xaaae50303d0c in mos6522_init qemu/hw/misc/mos6522.c:490
#6 0xaaae50b77d70 in object_init_with_type qemu/qom/object.c:371
#7 0xaaae50b7ae84 in object_initialize_with_type qemu/qom/object.c:515
#8 0xaaae50b7b0f8 in object_new_with_type qemu/qom/object.c:729
#9 0xaaae50bb6d58 in qmp_device_list_properties qemu/qom/qom-qmp-cmds.c:153
#10 0xaaae50d7e1dc in qmp_marshal_device_list_properties qemu/qapi/qapi-commands-qdev.c:59
#11 0xaaae50dc87a0 in do_qmp_dispatch_bh qemu/qapi/qmp-dispatch.c:110
#12 0xaaae50d931a0 in aio_bh_call qemu/util/async.c:136
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210112112705.380534-3-ganqixin@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When running device-introspect-test, a memory leak occurred in the pl031_init
function, this patch use timer_free() in the finalize function to fix it.
ASAN shows memory leak stack:
Direct leak of 48 byte(s) in 1 object(s) allocated from:
#0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0)
#1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800)
#2 0xaaabf5621cfc in timer_new_full qemu/include/qemu/timer.h:523
#3 0xaaabf5621cfc in timer_new qemu/include/qemu/timer.h:544
#4 0xaaabf5621cfc in timer_new_ns qemu/include/qemu/timer.h:562
#5 0xaaabf5621cfc in pl031_init qemu/hw/rtc/pl031.c:194
#6 0xaaabf6339f6c in object_initialize_with_type qemu/qom/object.c:515
#7 0xaaabf633a1e0 in object_new_with_type qemu/qom/object.c:729
#8 0xaaabf6375e40 in qmp_device_list_properties qemu/qom/qom-qmp-cmds.c:153
#9 0xaaabf5a95540 in qdev_device_help qemu/softmmu/qdev-monitor.c:283
#10 0xaaabf5a96940 in qmp_device_add qemu/softmmu/qdev-monitor.c:801
#11 0xaaabf5a96e70 in hmp_device_add qemu/softmmu/qdev-monitor.c:916
#12 0xaaabf5ac0a2c in handle_hmp_command qemu/monitor/hmp.c:1100
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210112112705.380534-2-ganqixin@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This PR:
- Fixes some issues with the m25p80
- Improves GDB support for RISC-V
- Fixes some Linux boot issues, specifiaclly 32-bit boot failures
- Enforces PMP exceptions correctly
- Fixes some Coverity issues
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmAEsc8ACgkQIeENKd+X
cFT3cwf+NNPVzjl0T7OEI1XxL6UCEkX6/cgxPv+ChjMCRlfnts9iHMWyeiO8E4mG
qORpLe5YCT+tAVA+rKKVu8ADp5pE9sdRp8gO7TMhZaHi3r1CQpsleZWE9R0IoBIu
eiENTgFHIV3VFcJQpOgorqCJ9qRnx2pPjjwf0H8G/hMYcgaMAzz+rdK+XvP0cCaY
/U78g0pPWx1MwdIFhhhaxAhbthnv6TkWf6oSPeGezDaAp1tnNg/Bd+FL6pT0vAM9
Mhr39TqrOJ/R0npsTngVe5Rl23Gqh3/1AYOnZz1+e9J0pB4YXnxwwiuV0t8lZnsw
OFIGXm7V3dL8BQ4ycZojlIkmML2Siw==
=3q/k
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20210117-3' into staging
First RISC-V PR for 6.0
This PR:
- Fixes some issues with the m25p80
- Improves GDB support for RISC-V
- Fixes some Linux boot issues, specifiaclly 32-bit boot failures
- Enforces PMP exceptions correctly
- Fixes some Coverity issues
# gpg: Signature made Sun 17 Jan 2021 21:53:19 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20210117-3:
riscv: Pass RISCVHartArrayState by pointer
target/riscv: Remove built-in GDB XML files for CSRs
target/riscv: Generate the GDB XML file for CSR registers dynamically
target/riscv: Add CSR name in the CSR function table
target/riscv: Make csr_ops[CSR_TABLE_SIZE] external
hw/misc/sifive_u_otp: handling the fails of blk_pread and blk_pwrite
hw/riscv: sifive_u: Use SIFIVE_U_CPU for mc->default_cpu_type
target/riscv/pmp: Raise exception if no PMP entry is configured
RISC-V: Place DTB at 3GB boundary instead of 4GB
gdb: riscv: Add target description
hw/block: m25p80: Implement AAI-WP command support for SST flashes
hw/block: m25p80: Don't write to flash if write is disabled
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Part of Semihosting for AArch32 and AArch64 Release 2.0
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210107170717.2098982-10-keithp@keithp.com>
Message-Id: <20210108224256.2321-21-alex.bennee@linaro.org>
Part of Semihosting for AArch32 and AArch64 Release 2.0
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210107170717.2098982-9-keithp@keithp.com>
Message-Id: <20210108224256.2321-20-alex.bennee@linaro.org>
These are part of Semihosting for AArch32 and AArch64 Release 2.0
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210107170717.2098982-8-keithp@keithp.com>
Message-Id: <20210108224256.2321-19-alex.bennee@linaro.org>
This could made testing more easier and ARM/AArch64 has supported on
their linux user mode too, so I think it should be reasonable.
Verified GCC testsuite with newlib/semihosting.
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210107170717.2098982-7-keithp@keithp.com>
Message-Id: <20210108224256.2321-18-alex.bennee@linaro.org>
Adapt the arm semihosting support code for RISCV. This implementation
is based on the standard for RISC-V semihosting version 0.2 as
documented in
https://github.com/riscv/riscv-semihosting-spec/releases/tag/0.2
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210107170717.2098982-6-keithp@keithp.com>
Message-Id: <20210108224256.2321-17-alex.bennee@linaro.org>
env->boot_info is only set in some ARM startup paths, so we cannot
rely on it to support the SYS_HEAPINFO semihosting function. When not
available, fallback to finding a RAM memory region containing the
current stack and use the base of that.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210107170717.2098982-5-keithp@keithp.com>
Message-Id: <20210108224256.2321-16-alex.bennee@linaro.org>
