Commit Graph

386 Commits

Author SHA1 Message Date
Joseph Myers
c535d68755 target/i386: fix fscale handling of rounding precision
The fscale implementation uses floatx80_scalbn for the final scaling
operation.  floatx80_scalbn ends up rounding the result using the
dynamic rounding precision configured for the FPU.  But only a limited
set of x87 floating-point instructions are supposed to respect the
dynamic rounding precision, and fscale is not in that set.  Fix the
implementation to save and restore the rounding precision around the
call to floatx80_scalbn.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070045430.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10 12:10:21 -04:00
Joseph Myers
c1c5fb8f90 target/i386: fix fscale handling of infinite exponents
The fscale implementation passes infinite exponents through to generic
code that rounds the exponent to a 32-bit integer before using
floatx80_scalbn.  In round-to-nearest mode, and ignoring exceptions,
this works in many cases.  But it fails to handle the special cases of
scaling 0 by a +Inf exponent or an infinity by a -Inf exponent, which
should produce a NaN, and because it produces an inexact result for
finite nonzero numbers being scaled, the result is sometimes incorrect
in other rounding modes.  Add appropriate handling of infinite
exponents to produce a NaN or an appropriately signed exact zero or
infinity as a result.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070045010.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10 12:10:18 -04:00
Joseph Myers
b40eec96b2 target/i386: fix fscale handling of invalid exponent encodings
The fscale implementation does not check for invalid encodings in the
exponent operand, thus treating them like INT_MIN (the value returned
for invalid encodings by floatx80_to_int32_round_to_zero).  Fix it to
treat them similarly to signaling NaN exponents, thus generating a
quiet NaN result.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070044190.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10 12:10:17 -04:00
Joseph Myers
0d48b43632 target/i386: fix fscale handling of signaling NaN
The implementation of the fscale instruction returns a NaN exponent
unchanged.  Fix it to return a quiet NaN when the provided exponent is
a signaling NaN.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070043330.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10 12:10:17 -04:00
Joseph Myers
c415f2c582 target/i386: implement special cases for fxtract
The implementation of the fxtract instruction treats all nonzero
operands as normal numbers, so yielding incorrect results for invalid
formats, infinities, NaNs and subnormal and pseudo-denormal operands.
Implement appropriate handling of all those cases.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <alpine.DEB.2.21.2005070042360.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10 12:10:16 -04:00
Alex Bennée
b6771210b5 tests/tcg: add simple commpage test case
The COMMPAGE are a number of kernel provided user-space routines for
32 bit ARM systems. Add a basic series of smoke tests to ensure it is
working as it should.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200605154929.26910-14-alex.bennee@linaro.org>
2020-06-08 17:04:19 +01:00
Alex Bennée
919bfbf5d6 tests/tcg: add new threadcount test
Based on the original testcase by Nikolay Igotti.

Message-ID: <CAEme+7GLKg_dNsHizzTKDymX9HyD+Ph2iZ=WKhOw2XG+zhViXg@mail.gmail.com>
Signed-off-by: Nikolay Igotti <igotti@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20200520140541.30256-15-alex.bennee@linaro.org>
2020-05-27 14:26:49 +01:00
Alex Bennée
c729a99d27 tests/docker: use a gcc-10 based image for arm64 tests
As we enable newer features that we want to test on arm64 targets we
need newer compilers. Split off a new debian-arm64-test-cross image
which we can use to build these new tests.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-11-alex.bennee@linaro.org>
2020-05-27 14:26:49 +01:00
Alex Bennée
8ec6f33151 tests/tcg: better detect confused gdb which can't connect
While we may gamely give the right information it can still confuse
the wide range of GDBs out there. For example ppc64abi32-linux-user
reports:

  warning: Selected architecture powerpc:common is not compatible with reported target architecture powerpc:common64
  warning: Architecture rejected target-supplied description

but still connects. Add a test for a 0 pc and exit early if that is
the case. This may actually be a bug we need to fix?

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-8-alex.bennee@linaro.org>
2020-05-27 14:26:49 +01:00
Alex Bennée
be9bc1b73a tests/tcg: fix invocation of the memory record/replay tests
I'm not sure when this broke but we should use EXTRA_RUNS for
"virtual" tests which are not generated from the binary names.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Message-Id: <20200520140541.30256-5-alex.bennee@linaro.org>
2020-05-27 14:26:49 +01:00
Joseph Myers
9ecaf5ccec softfloat: fix floatx80 pseudo-denormal round to integer
The softfloat function floatx80_round_to_int incorrectly handles the
case of a pseudo-denormal where only the high bit of the significand
is set, ignoring that bit (treating the number as an exact zero)
rather than treating the number as an alternative representation of
+/- 2^-16382 (which may round to +/- 1 depending on the rounding mode)
as hardware does.  Fix this check (simplifying the code in the
process).

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005042339420.22972@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-15 11:04:50 -07:00
Joseph Myers
be53fa785a softfloat: fix floatx80 pseudo-denormal comparisons
The softfloat floatx80 comparisons fail to allow for pseudo-denormals,
which should compare equal to corresponding values with biased
exponent 1 rather than 0.  Add an adjustment for that case when
comparing numbers with the same sign.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005042338470.22972@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-15 11:04:50 -07:00
Joseph Myers
4160280776 softfloat: fix floatx80 pseudo-denormal addition / subtraction
The softfloat function addFloatx80Sigs, used for addition of values
with the same sign and subtraction of values with opposite sign, fails
to handle the case where the two values both have biased exponent zero
and there is a carry resulting from adding the significands, which can
occur if one or both values are pseudo-denormals (biased exponent
zero, explicit integer bit 1).  Add a check for that case, so making
the results match those seen on x86 hardware for pseudo-denormals.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005042337570.22972@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-15 11:04:50 -07:00
Joseph Myers
7537c2b4a3 softfloat: silence sNaN for conversions to/from floatx80
Conversions between IEEE floating-point formats should convert
signaling NaNs to quiet NaNs.  Most of those in QEMU's softfloat code
do so, but those for floatx80 fail to.  Fix those conversions to
silence signaling NaNs as well.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005042336170.22972@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-15 11:04:50 -07:00
Alex Bennée
df3ca22318 tests/tcg: add a multiarch linux-user gdb test
When the gdbstub code was converted to the new API we missed a few
snafus in the various guests. Add a simple gdb test script which can
be used on all our linux-user guests to check for obvious failures.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200430190122.4592-9-alex.bennee@linaro.org>
2020-05-06 09:29:26 +01:00
Alex Bennée
744f1b0f68 tests/tcg: drop inferior.was_attached() test
This test seems flaky and reports attachment even when we failed to
negotiate the architecture. However the fetching of the guest
architecture will fail tripping up the gdb AttributeError which will
trigger our early no error status exit from the test

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200430190122.4592-5-alex.bennee@linaro.org>
2020-05-06 09:29:26 +01:00
Alex Bennée
d2fefdedd3 tests/tcg: better trap gdb failures
It seems older and non-multiarach aware GDBs might not fail gracefully
when faced with something they don't know. For example when faced with
a target XML for s390x the Ubuntu 18.04 gdb will generate an internal
fault and prompt for a core dump.

Work around this by invoking GDB in a more batch orientated way and
then trying to filter out between test failures and gdb failures.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200430190122.4592-4-alex.bennee@linaro.org>
2020-05-06 09:29:26 +01:00
Alex Bennée
af7fc47f2c tests/tcg: remove extraneous pasting macros
We are not using them and they just get in the way.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200403191150.863-4-alex.bennee@linaro.org>
2020-04-07 16:19:49 +01:00
Alex Bennée
f4a23e1797 tests/tcg/aarch64: add test-sve-ioctl guest-debug test
This test exercises the gdbstub while runing the sve-iotcl test. I
haven't plubmed it into make system as we need a way of verifying if
gdb has the right support for SVE.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200316172155.971-26-alex.bennee@linaro.org>
2020-03-17 17:38:47 +00:00
Alex Bennée
2b6d6371a9 tests/tcg/aarch64: add SVE iotcl test
This is a fairly bare-bones test of setting the various vector sizes
for SVE which will only fail if the PR_SVE_SET_VL can't reduce the
user-space vector length by powers of 2.

However we will also be able to use it in a future test which
exercises the GDB stub.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-25-alex.bennee@linaro.org>
2020-03-17 17:38:47 +00:00
Alex Bennée
cf58773f1c tests/tcg/aarch64: add a gdbstub testcase for SVE registers
A very simple test case which sets and reads SVE registers while
running a test case. We don't really need to compile a SVE binary for
this case but we will later so keep it simple for now.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-24-alex.bennee@linaro.org>
2020-03-17 17:38:47 +00:00
Alex Bennée
fe185734d0 tests/tcg/aarch64: userspace system register test
This tests a bunch of registers that the kernel allows userspace to
read including the CPUID registers. We need a SVE aware compiler as we
are testing the id_aa64zfr0_el1 register in the set.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-21-alex.bennee@linaro.org>
2020-03-17 17:38:38 +00:00
Richard Henderson
e2d30df907 tests/tcg/aarch64: Add newline in pauth-1 printf
Make the output just a bit prettier when running by hand.

Cc: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05 16:09:19 +00:00
Alex Bennée
bc97f9f64f tests/tcg: take into account expected clashes pauth-4
Pointer authentication isn't perfect so measure the percentage of
failed checks. As we want to vary the pointer we work through a bunch
of different addresses.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200225124710.14152-20-alex.bennee@linaro.org>
2020-02-25 20:20:23 +00:00
Alex Bennée
a62f849dc5 tests/tcg: fix typo in configure.sh test for v8.3
Although most people use the docker images this can trip up on
developer systems with actual valid cross-compilers!

Fixes: bb516dfc5b
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200225124710.14152-19-alex.bennee@linaro.org>
2020-02-25 20:20:23 +00:00
Alex Bennée
a0dafafeba tests/tcg: give debug builds a little bit longer
When combined with heavy plugins we occasionally hit the timeouts.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200225124710.14152-17-alex.bennee@linaro.org>
2020-02-25 20:20:23 +00:00
Alex Bennée
f2887ba336 tests/tcg: include a skip runner for pauth3 with plugins
If we have plugins enabled we still need to have built the test to be
able to run it.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200225124710.14152-2-alex.bennee@linaro.org>
2020-02-25 17:42:58 +00:00
Alex Bennée
bb516dfc5b tests/tcg: gate pauth-% tests on having compiler support
Otherwise we end up failing to build our tests on CI which may have
older compilers that the user expects. We can get rid of this once we
can fallback to multiarch containers.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200203090932.19147-14-alex.bennee@linaro.org>
2020-02-04 17:13:29 +00:00
Alex Bennée
ded663a226 tests/tcg: add a configure compiler check for ARMv8.1 and SVE
We will need this for some tests later. The docker images already
support it by default.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200203090932.19147-13-alex.bennee@linaro.org>
2020-02-04 17:13:29 +00:00
Richard Henderson
dd684ead29 tests/tcg/aarch64: Add pauth-4
Perform the set of operations and test described in LP 1859713.

Suggested-by: Adrien GRASSEIN <adrien.grassein@smile.fr>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200116230809.19078-5-richard.henderson@linaro.org
[PMM: fixed hard-coded tabs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-23 15:22:39 +00:00
Richard Henderson
73fc079849 tests/tcg/aarch64: Add pauth-3
This is the test vector from the QARMA paper, run through PACGA.

Suggested-by: Vincent Dehors <vincent.dehors@smile.fr>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200116230809.19078-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-23 15:22:39 +00:00
Richard Henderson
fdd9b09413 tests/tcg/aarch64: Fix compilation parameters for pauth-%
We were incorrectly requiring ARMv8.4 support for the pauth
tests, but Pointer Authentication is an ARMv8.3 extension.
Further, hiding the required architecture within asm() is
not correct.

Correct the architecture version requested, and specify it
in the cflags of the (cross-) compiler rather than in the asm.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200116230809.19078-3-richard.henderson@linaro.org
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-23 15:22:38 +00:00
Alex Bennée
486e58b188 tests/tcg: add user version of dumb-as-bricks semiconsole test
There are linux-user users of semihosting so we'd better check things
work for them as well.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-09 11:41:29 +00:00
Alex Bennée
f05938090b tests/tcg: extract __semi_call into a header and expand
There are two types of ARM semicall - lets test them both. Putting the
logic in a header will make re-using the functions easier later.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-09 11:41:29 +00:00
Alex Bennée
9c354591ca tests/tcg: add a dumb-as-bricks semihosting console test
We don't run this during check-tcg as we would need to check stuff is
echoed back. However we can still build the binary so people can test
it manually.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-09 11:41:29 +00:00
Alex Bennée
380976f40f tests/tcg: ensure we re-configure if configure.sh is updated
We were only doing this if docker was enabled which isn't quite right.

Fixes: fc76c56d3f
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191211170520.7747-17-alex.bennee@linaro.org>
2019-12-19 08:20:16 +00:00
Alex Bennée
afc3a8f9f1 configure: allow disable of cross compilation containers
Our docker infrastructure isn't quite as multiarch as we would wish so
lets allow the user to disable it if they want. This will allow us to
use still run check-tcg on non-x86 CI setups.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
2019-12-18 20:17:24 +00:00
Taylor Simpson
22c30b2d20 tests/tcg: modify multiarch tests to work with clang
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1574032465-12186-1-git-send-email-tsimpson@quicinc.com>
[AJB: tweak header line]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-11-20 10:53:31 +00:00
Richard Henderson
3d72543494 tests/tcg/multiarch/linux-test: Fix error check for shmat
The error indicator for this syscall is -1, not 0.

Fixes: e374bfa35b ("shm tests - disabled clone test")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-11-06 13:30:04 +01:00
Alex Bennée
3089e74e67 tests/tcg: enable plugin testing
If CONFIG_PLUGINS is enabled then lets enable testing for all our TCG
targets. This is a simple smoke test that ensure we don't crash or
otherwise barf out by running each plugin against each test.

There is a minor knock on effect for additional runners which need
specialised QEMU_OPTS which will also need to declare a plugin version
of the runner. If this gets onerous we might need to add another
helper.

Checking the results of the plugins is left for a later exercise.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28 15:12:38 +00:00
Alex Bennée
eba9ccf8f8 tests/tcg: drop test-i386-fprem from TESTS when not SLOW
This is a very slow running test which we only enable explicitly.
However having it in the TESTS lists would confuse additional tests
like the plugins test which want to run on all currently enabled
tests.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28 15:12:38 +00:00
Alex Bennée
1852f3e486 tests/tcg: move "virtual" tests to EXTRA_TESTS
Otherwise clever expanders like the plugins test get unstuck.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28 15:12:38 +00:00
Alex Bennée
02f903140b tests/tcg: set QEMU_OPTS for all cris runs
This will important for ensuring the plugin test variants will also
work.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28 15:12:38 +00:00
Alex Bennée
899ba5edd8 tests/tcg/Makefile.target: fix path to config-host.mak
Since moving where the tests are run the path to config-host.mak has
been wrong. This doesn't affect much but things like the time fallback
for CONFIG_DEBUG_TCG and will also get in the way of checking for
PLUGINS support.

Fixes: fc76c56d3f
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-28 15:12:38 +00:00
Peter Maydell
786d36ad41 target-arm queue:
* Fix the CBAR register implementation for Cortex-A53,
    Cortex-A57, Cortex-A72
  * Fix direct booting of Linux kernels on emulated CPUs
    which have an AArch32 EL3 (incorrect NSACR settings
    meant they could not access the FPU)
  * semihosting cleanup: do more work at translate time
    and less work at runtime
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl2OHYsZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3oHlD/4iD57WzVkf2EagPg61EbqV
 KJU0bloj6lpfhI410zv6RLfSxRhuJKj1voBPl0wh/uWz4kIHBjcYZgRQGZz5+Fem
 XE4j7bLfgXlbYkjl6CFo3oqZJM+iVmMofKVbpj7nEnO6cB9nW2O4Uk88vPTqCRUp
 uip/ZveoQ3WvzyM8ERWiIiGZrvCRPnfTFvWGNEDd+ESx3ACmNbeAHilMURESkXR8
 3iRt83bzL+H7xRpVEmLvUAbjJlf+4dzyftJSwTDquLsu+g4I45BDe1ki7ip9U06B
 EvgNZ0TKchNI2kn6I4R0XAYAdZyKRONWqYTPE3xEtweihLwOKYsKfQViSHkhYxuE
 upqMfsSzpT2ivqMb5myFU8JbG6jZZGTguAZ40MQT073gckgFoFfWjAtzR0fWa/Cy
 VJ79fWIfOXrRsc76UDBeDuJ3CFEliFMSzDJWwglxlp9JX6ckfHH0Vwfmj9NPcuRw
 AeAkI7Xh+emNKftJzNtC+6Ba7jMhMLLDBoe1r3NQYK1BFg/JRtkGCja3UAswotXH
 hEYMicbMnkhOGEKxjKL0jbl33XKKAVq3pens2tT0QIz3Xqzh9iIcceCnv4MsddK9
 MPU8yfQYcj6eNxVBLofhuRGURMK4BpQzj2Rxg03G3dRpFuNEwneUrx64q8lEv4Y5
 EWSFxOoBPEpooiMCoboZ/A==
 =/0m2
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190927' into staging

target-arm queue:
 * Fix the CBAR register implementation for Cortex-A53,
   Cortex-A57, Cortex-A72
 * Fix direct booting of Linux kernels on emulated CPUs
   which have an AArch32 EL3 (incorrect NSACR settings
   meant they could not access the FPU)
 * semihosting cleanup: do more work at translate time
   and less work at runtime

# gpg: Signature made Fri 27 Sep 2019 15:32:43 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20190927:
  hw/arm/boot: Use the IEC binary prefix definitions
  hw/arm/boot.c: Set NSACR.{CP11,CP10} for NS kernel boots
  tests/tcg: add linux-user semihosting smoke test for ARM
  target/arm: remove run-time semihosting checks for linux-user
  target/arm: remove run time semihosting checks
  target/arm: handle A-profile semihosting at translate time
  target/arm: handle M-profile semihosting at translate time
  tests/tcg: clean-up some comments after the de-tangling
  target/arm: fix CBAR register for AArch64 CPUs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	tests/tcg/arm/Makefile.target
2019-09-30 11:02:22 +01:00
Alex Bennée
83704ceff1 tests/tcg: add linux-user semihosting smoke test for ARM
We already use semihosting for the system stuff so this is a simple
smoke test to ensure we are working OK on linux-user.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190913151845.12582-7-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-27 11:41:32 +01:00
Alex Bennée
72ab7f9e1d tests/tcg: clean-up some comments after the de-tangling
These were missed in the recent de-tangling so have been updated to be
more actuate. I've also built up ARM_TESTS in a manner similar to
AARCH64_TESTS for better consistency.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190913151845.12582-2-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-27 11:41:28 +01:00
Alex Bennée
b9fe0063b7 tests/tcg: add simple record/replay smoke test for aarch64
This adds two new tests that re-use the memory test to check basic
record replay functionality is still working. We have to define our
own runners rather than using the default pattern as we want to change
the test name but re-use the memory binary.

We declare the test binaries as PHONY as they don't really exist.

[AJB: A better test would output some sort of timer value or other
otherwise variable value so we could compare the record and replay
outputs and ensure they match]

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Pavel Dovgalyuk <dovgaluk@ispras.ru>
2019-09-26 19:00:53 +01:00
Alex Bennée
b059a62bb6 tests/tcg: add generic version of float_convs
This is broadly similar to the existing fcvt test for ARM but using
the generic float testing framework. We should be able to pare down
the ARM fcvt test case to purely half-precision with or without the
Alt HP provision.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-09-26 19:00:53 +01:00
Alex Bennée
a4f3ed629e tests/tcg: add float_madds test to multiarch
This is a generic floating point multiply and accumulate test for
single precision floating point values. I've split of the common float
functions into a helper library so additional tests can use the same
common code.

As I don't have references for all architectures I've allowed some
flexibility for tests to pass without reference files. They can be
added as we get collect them.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-09-26 19:00:53 +01:00
Alex Bennée
149911cff7 tests/tcg: re-enable linux-test for ppc64abi32
Now we have fixed the signal delivary bug we can remove this horrible
hack from the system.

Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-09-26 19:00:53 +01:00
Alex Bennée
9a297fac5f tests/tcg: clean-up some comments after the de-tangling
These were missed in the recent de-tangling so have been updated to be
more actuate. I've also built up ARM_TESTS in a manner similar to
AARCH64_TESTS for better consistency.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-09-26 19:00:53 +01:00
David Hildenbrand
5d69cbdfdd tests/tcg: target/s390x: Test MVC
Let's add a test that especially verifies that no data will be touched
in case we cross page boundaries and one page access triggers a fault.

Before the fault-safe handling fixes, the test failes with:
      TEST    mvc on s390x
    data modified during a fault
    make[2]: *** [../Makefile.target:116: run-mvc] Error 1

Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
2019-09-23 09:28:29 +02:00
David Hildenbrand
d9e13c3419 tests/tcg: target/s390x: Test MVO
Let's add the simple test based on the example from the PoP.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
2019-09-23 09:28:29 +02:00
Alex Bennée
18b6be4326 tests/docker: move our arm64 cross compile to Buster
Now Buster is released we can unify our cross build images for both
QEMU and tests.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-09-10 14:14:31 +01:00
Alex Bennée
8cf4efcf30 tests/tcg: add .gitignore for in source builds
This hides the new build artefacts from the re-organised TCG tests when
you are doing an in-source build.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-09-10 14:14:31 +01:00
Paolo Bonzini
2038f8c877 tests/tcg: move configuration to a sub-shell script
Avoid the repeated inclusions of config-target.mak, which have
risks of namespace pollution, and instead build minimal configuration
files in a configuration script.  The same configuration files can
also be included in Makefile and Makefile.qemu

[AJB 10/09/19]
In the original PR this had inadvertently enabled tests
for ppc64abi32. However as the rest of the multiarch tests work rather
than disabling the otherwise correctly functioning build I've just
skipped the failing linux-test test. For some reason I can't debug it
with TCG so I'm leaving that to the PPC maintainers to look at.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-4-pbonzini@redhat.com>
[AJB: s/docker/container/, rm last bits from configure, ppc6432abi hack]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
2019-09-10 14:09:00 +01:00
Paolo Bonzini
fc76c56d3f tests/tcg: cleanup Makefile inclusions
Rename Makefile.probe to Makefile.prereqs and make it actually
define rules for the tests.

Rename Makefile to Makefile.target, since it is not a toplevel
makefile.

Rename Makefile.include to Makefile.qemu and disentangle it
from the QEMU Makefile.target, so that it is invoked recursively
by tests/Makefile.include.  Tests are now placed in
tests/tcg/$(TARGET).

Drop the usage of TARGET_BASE_ARCH, which is ignored by everything except
x86_64 and aarch64.  Fix x86 tests by using -cpu max and, while
at it, standardize on QEMU_OPTS for aarch64 tests too.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-3-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-09-10 09:38:33 +01:00
Paolo Bonzini
6a9e0ef32a tests/tcg: use EXTRA_CFLAGS everywhere
For i386 specifically, this allows using the host GCC
to compile the i386 tests.  But, it should really be
done for all targets, unless we want to pass $(EXTRA_CFLAGS)
directly as part of $(CC).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-2-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-09-10 09:38:33 +01:00
Alex Bennée
71ebbe09e9 tests/docker: fix "cc" command to work with podman
Podman requires a little bit of additional magic to the uid mapping
which was already done for the normal RunCommand. We simplify the
logic by pushing it directly into the Docker::run method to avoid
instantiating an extra Docker() object and ensure the CC command
always runs as the current user.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-09-10 09:38:33 +01:00
Aleksandar Markovic
6eed53f71b target/mips: tests/tcg: Fix target configurations for MSA tests
At this moment, the only MIPS CPUs that are emulated in QEMU and
support MSA extension are R5600 (mips32r5), and I6400/I6500 (mips64r6).
Therefore, mips32r5 and mips64r6 are the only ISAs that could support
MSA in QEMU. This means mips32r6 currently do not make much sense, and
mips32r5 support for MSA tests is needed, which is done by this patch.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-38-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-19 19:53:37 +02:00
Aleksandar Markovic
d7059fd737 target/mips: tests/tcg: Add optional printing of more detailed failure info
There is a need for printing input and output data for failure cases,
for debugging purpose. This is achieved by this patch, and only if a
preprocessor constant is manually set to 1. (Assumption is that the
need for such printout is relatively rare.)

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-37-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-19 19:53:37 +02:00
Alex Bennée
ef860047b6 tests/tcg: fix diff-out pass to properly report failure
A side effect of piping the output to head is squash the exit status
of the diff command. Fix this by only doing the pipe if the diff
failed and then ensuring the status is non-zero.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-07-10 10:31:22 +01:00
Alex Bennée
bd2c0f67e1 tests/tcg: fix up test-i386-fprem.ref generation
We never shipped the reference data in the source tree because it's
quite big (64M). As a result the only option is to generate it
locally. Although we have a rule to generate the reference file we
missed the dependency and location changes, probably because it's only
run for SLOW test runs.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-07-10 10:31:20 +01:00
Aleksandar Markovic
89a09189e0 tcg/tests: target/mips: Correct MSA test compilation and execution order
Correct MSA test compilation and execution order, for the sake of
consistence.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1562068213-11307-4-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02 14:20:24 +02:00
Aleksandar Markovic
391f77aaba tcg/tests: target/mips: Amend MSA integer multiply tests
Amend MSA fixed point multiply tests: correct output values for
MADDV.B, MADDV.H, MADDV.W, MADDV.D, MSUBV.B, MSUBV.H, MSUBV.W and
MSUBD.D.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1562068213-11307-3-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02 14:20:19 +02:00
Aleksandar Markovic
4cd013cd6e tcg/tests: target/mips: Amend MSA fixed point multiply tests
Amend MSA fixed point multiply tests: add tests for MADD_Q.H, MADD_Q.W,
MADDR_Q.H, MADDR_Q.W, MSUB_Q.H, MSUB_Q.W, MSUBR_Q.H and MSUBR_Q.W.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1562068213-11307-2-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02 14:20:11 +02:00
Peter Maydell
d247c8e7f4 - cleanup/refactoring in the cpu feature code
- fix for a tcg test case
 - halt/clear support for vfio-ccw, and use a new helper
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEw9DWbcNiT/aowBjO3s9rk8bwL68FAl0Z6bkSHGNvaHVja0By
 ZWRoYXQuY29tAAoJEN7Pa5PG8C+vwugQAJPAlCvafepuaZHGvM/hYJVg+goVvbd/
 EQhDBVFNWcMXCR6LSt67NAgAjDu21KFPWy+CC/JtzqiXWnGZdwSHd9ydfmsW+Z4t
 /aGrNv6MQ9WuEZ7hujsWEyAbMxIY1LnE9noulQBOvw28BcxRVNeQlFt9c5bcEdkb
 2/Mvs8X3+VyPes4lnNre6AYSQdCwTqrhcExwONHeQloy7fK6GU118oMjjn8QUabl
 NiNIseij2WkuFaqZGf/CPgtwAl6d7OZFPXaqgRVoGT+wKsE2u8dkc4VAYusS8Mrj
 lZ8XEkoYRUZVI6mkUcHPY66cvRUvlOjc+pXVw2p0GqzLTiXrr9ZOQIm0tiwTgFs1
 EwZv2B5nW7T/jmqh4MZRgs+Qrmr04NHdsoA5y4vDx1cmq7C80Itn5CIwlntXlwMQ
 N+949bNj8ZL38CE4ksaYfp5+mfB1ay7FUEL/jEgOXFsWYXMmPlC1r2lZ/1ARBjGw
 iCNuCq/9fjBTbHPG5ulXP+z74eHf3Qw6wxT7SXaK3RiY1gN6ZKSTTnWVJws0ai65
 OK76Ls3WiCYKYZpT06snIhOkRSt9+gd4DUtF8oLfgWYV7RDkCVC7Fr2hwS570dUh
 Sz7nGM2vlAcfXYMeRR4wQZV/hQDVgX5bxlI0cvvrsefVZ1DxuaT0GXBmktls7Pns
 N6j6sK8DwTSB
 =0dnG
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20190701' into staging

- cleanup/refactoring in the cpu feature code
- fix for a tcg test case
- halt/clear support for vfio-ccw, and use a new helper

# gpg: Signature made Mon 01 Jul 2019 12:08:41 BST
# gpg:                using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg:                issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20190701:
  s390x: add cpu feature/model files to KVM section
  vfio-ccw: support async command subregion
  vfio-ccw: use vfio_set_irq_signaling
  s390x/cpumodel: Prepend KDSA features with "KDSA"
  s390x/cpumodel: Rework CPU feature definition
  tests/tcg/s390x: Fix alignment of csst parameter list

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02 11:48:39 +01:00
Aleksandar Markovic
23dd244baf tests/tcg: target/mips: Fix some test cases for pack MSA instructions
Fix certian test cases for MSA pack instructions.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561543629-20327-8-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-26 13:25:51 +02:00
Aleksandar Markovic
4c399d066c tests/tcg: target/mips: Add support for MSA MIPS32R6 testings
Add files for MSA MIPS32R6 target testings (copiling and running).

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561543629-20327-7-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-26 13:25:46 +02:00
Aleksandar Markovic
5258822fcc tests/tcg: target/mips: Add support for MSA big-endian target testings
Add files for MSA big-endian target testings (copiling and running).

Little-endian files are renamed and ammended too.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561543629-20327-6-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-26 13:25:41 +02:00
Aleksandar Markovic
0b1450cce8 tests/tcg: target/mips: Amend tests for MSA int multiply instructions
Amend tests for MSA int multiply instructions.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561543629-20327-5-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-26 13:25:33 +02:00
Aleksandar Markovic
c0a19f7bf1 tests/tcg: target/mips: Amend tests for MSA int dot product instructions
Add tests for instructions whose result depends on the value in destination
register (prior to instruction execution).

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561543629-20327-4-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-26 13:25:28 +02:00
Aleksandar Markovic
3d9569b855 tests/tcg: target/mips: Add tests for MSA move instructions
Add tests for MSA move instructions.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561543629-20327-3-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-26 13:25:22 +02:00
Aleksandar Markovic
666952ea7c tests/tcg: target/mips: Add tests for MSA bit move instructions
Add tests for MSA bit move instructions.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561543629-20327-2-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-26 13:25:17 +02:00
Cornelia Huck
60853009be One fix for a tcg test case and two cleanups/refactorings of cpu feature
definitions.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEG9nKrXNcTDpGDfzKTd4Q9wD/g1oFAl0M3aERHGRhdmlkQHJl
 ZGhhdC5jb20ACgkQTd4Q9wD/g1pekA//cMMgymbEhS5/F9GkNJe5fogt2XMS2RFr
 GYchvc/QwZQWzEDnvZ7a7AaJwSQMWluSnvZ8r43DBHFwhdz+7X1LR4ekgke/B6H0
 xldb3oeM0gJTGGU4VpSPMyp8uawPp6s175tBh7m2HlXQx1wilCvbRsE9Asjp9FOd
 4c6ztWkzZ3vlJK1qyg3N5MPS2ZM88vr8yipjcqvXW+dAMG8AawpYnF/BEG6/slJ0
 WKM7T4yJddgOEwIP2s1MxDc/WMKqgaKTIQa0iwHJQHzn1KOnIJCDt8ay0BHF16WA
 Ly2Q/AKWr5gv9QKIKSeXvL3Yq0GcD2ext+F9FJOjil4NrER+AfGy51bdZ729E3Qu
 gpbryEocDhiB5DHyEaTUX9KKFf/l2QSxAd5/sMwwJXQ8ZwG33rjbQ14JgQHJCk3N
 Bn+UJ5rs0nrpNvT0pJaweDgNp7s9UOnk96ND2U9l10XWDekM+ne0KC/QHYgyEp7L
 Gq22dgEDBueodQOO03bFqU454l74Wl7ZUPlZH/pvIw7vmqy9Y6bLbzQldzeaHwMk
 P3oL8MAY3TCpR0i+vti5uztQmdDVpOhKxgXFdT4o2TQ7c2Oxw4ZLsHqJwR5c/0+P
 bc1DhpH1/Y9tDHi0kjwzPcBOS7Qh7V28SCGLvaGYblxYBHkLBDVgGvnpd0VqD3ig
 C8XM9k4zUH8=
 =Bcc2
 -----END PGP SIGNATURE-----

Merge tag 's390x-tcg-2019-06-21' into s390-next-staging

One fix for a tcg test case and two cleanups/refactorings of cpu feature
definitions.

# gpg: Signature made Fri 21 Jun 2019 03:37:37 PM CEST
# gpg:                using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A
# gpg:                issuer "david@redhat.com"
# gpg: Good signature from "David Hildenbrand <david@redhat.com>" [full]
# gpg:                 aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full]

* tag 's390x-tcg-2019-06-21':
  s390x/cpumodel: Prepend KDSA features with "KDSA"
  s390x/cpumodel: Rework CPU feature definition
  tests/tcg/s390x: Fix alignment of csst parameter list

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-24 17:30:18 +02:00
Richard Henderson
62a31161ee tests/tcg/s390x: Fix alignment of csst parameter list
The parameter list given in general register 1 shall be aligned
on a quadword boundary.  This test currently succeeds or fails
depending on the compiler version used and the accidential layout
of the function's stack frame.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
2019-06-21 15:26:53 +02:00
Aleksandar Markovic
f9fa196bd7 tests/tcg: target/mips: Amend tests for MSA pack instructions
Add tests for cases when destination register is the same as one
of source registers.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561031359-6727-3-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-21 11:30:36 +02:00
Aleksandar Markovic
8e6fe6b8ba tests/tcg: target/mips: Include isa/ase and group name in test output
For better appearance and usefullnes, include ISA/ASE name and
instruction group name in the output of tests. For example, all
this data will be displayed for FMAX_A.W test:

| MSA       | Float Max Min       | FMAX_A.W    |
| PASS:  80 | FAIL:   0 | elapsed time: 0.16 ms |

(the data will be displayed in one row; they are presented here in two
rows not to exceed the width of the commit message)

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561031359-6727-2-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-21 11:30:31 +02:00
Richard Henderson
d67ebada15 target/arm: Fix output of PAuth Auth
The ARM pseudocode installs the error_code into the original
pointer, not the encrypted pointer.  The difference applies
within the 7 bits of pac data; the result should be the sign
extension of bit 55.

Add a testcase to that effect.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-13 15:14:03 +01:00
Alex Bennée
db61edad7a tests/tcg/x86_64: add a PVH crt.o for x86_64 system tests
Instead of doing the full real to 64 bit dance we are attempting to
leverage Xen's PVH boot spec to go from 32 bit to 64 bit.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12 17:53:23 +01:00
Alex Bennée
2736b5cbee tests/tcg: clean-up VPATH/TESTS for i386
Since we only run build the multiarch tests and we use a fully
resolved path for the crt object we don't need the wildcard or VPATH
messing about.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12 17:53:22 +01:00
Alex Bennée
fcf112317c tests/tcg: better detect truncated reads
If we've truncated a wider read we can detect the condition earlier by
looking at the number of zeros we've read. So we don't trip up on
cases where we have written zeros to the start of the buffer we also
ensure we only start each offset read from the right address.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12 17:53:22 +01:00
Aleksandar Markovic
88e34ac062 tests/tcg: target/mips: Add README for MSA tests
Add README for MSA tests. This is just to explain how to run tests even
without Makefile. Makefile will be provided later on.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-11-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-07 11:53:07 +02:00
Aleksandar Markovic
8598f5fac1 tests/tcg: target/mips: Add tests for MSA FP max/min instructions
Add tests for MSA FP max/min instructions. This includes following
instructions:

  * FMAX.W - float maximum (words)
  * FMAX.D - float maximum (doublewords)
  * FMAX_A.W - float maximum absolute (words)
  * FMAX_A.D - float maximum absolute (doublewords)
  * FMIN.W - float minimum (words)
  * FMIN.D - float minimum (doublewords)
  * FMIN_A.W - float minimum absolute (words)
  * FMIN_A.D - float minimum absolute (doublewords)

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-10-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-07 11:53:07 +02:00
Aleksandar Markovic
ca693d1c92 tests/tcg: target/mips: Add utility function reset_msa_registers()
Add function reset_msa_registers() and utilize it in each MSA test.
This is needed to ensure independency of test results on the state of
MSA registers before test execution. This also allows for correction
of tests for VSHF* instructions, that are now independent on the
previous state of MSA registers.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-9-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-07 11:53:07 +02:00
Aleksandar Markovic
b7c6798220 tests/tcg: target/mips: Move four tests to a better location
Move tests for <MUL|MULR>_Q.<H|B> from "integer multiply" directory
to "fixed-point multiply" directory, since they do not operate on
integers, but on fixed point numbers.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-8-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-07 11:53:07 +02:00
Aleksandar Markovic
99d423e576 tests/tcg: target/mips: Add tests for MSA shift instructions
Add tests for MSA shift instructions. This includes following
instructions:

  * SLL.B - shift left logical (bytes)
  * SLL.H - shift left logical (halfwords)
  * SLL.W - shift left logical (words)
  * SLL.D - shift left logical (doublewords)
  * SRA.B - shift right arithmetic (bytes)
  * SRA.H - shift right arithmetic (halfwords)
  * SRA.W - shift right arithmetic (words)
  * SRA.D - shift right arithmetic (doublewords)
  * SRAR.B - shift right arithmetic rounded (bytes)
  * SRAR.H - shift right arithmetic rounded (halfwords)
  * SRAR.W - shift right arithmetic rounded (words)
  * SRAR.D - shift right arithmetic rounded (doublewords)
  * SRL.B - shift right logical (bytes)
  * SRL.H - shift right logical (halfwords)
  * SRL.W - shift right logical (words)
  * SRL.D - shift right logical (doublewords)
  * SRLR.B - shift right logical rounded (bytes)
  * SRLR.H - shift right logical rounded (halfwords)
  * SRLR.W - shift right logical rounded (words)
  * SRLR.D - shift right logical rounded (doublewords)

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-7-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-07 11:53:07 +02:00
Aleksandar Markovic
6ec12d4feb tests/tcg: target/mips: Amend and rearrange MSA wrappers
Amend and rearrange MSA wrappers to follow the same organization as
in MSA tests.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-6-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-07 11:53:07 +02:00
Aleksandar Markovic
1d336c87a3 tests/tcg: target/mips: Add tests for MSA bit set instructions
Add tests for MSA bit set instructions. This includes following
instructions:

  * BCLR.B - clear bit (bytes)
  * BCLR.H - clear bit (halfwords)
  * BCLR.W - clear bit (words)
  * BCLR.D - clear bit (doublewords)
  * BNEG.B - negate bit (bytes)
  * BNEG.H - negate bit (halfwords)
  * BNEG.W - negate bit (words)
  * BNEG.D - negate bit (doublewords)
  * BSET.B - set bit (bytes)
  * BSET.H - set bit (halfwords)
  * BSET.W - set bit (words)
  * BSET.D - set bit (doublewords)

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1555699081-24577-5-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-01 20:20:20 +02:00
Aleksandar Markovic
750541c492 target/mips: Amend and cleanup MSA TCG tests
Add missing bits and peaces of the tests of the emulation of certain
MSA (non-immediate variants): some tests were missing two last cases;
some instructions were missing wrappers; some test included wrong
headers; some tests were missing altogether; updated some copywright
preambles; do several other minor cleanups.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1555699081-24577-4-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-01 20:20:20 +02:00
David Gibson
c10aaaab0f tests: Fix up docker cross builds for ppc64 (BE) targets
We currently have docker cross building targets for powerpc (32-bit, BE)
and ppc64el (64-bit, LE), but not for pcp64 (64-bit, BE).  This is an
irritating gap in make check-tcg coverage so correct it.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29 11:14:19 +10:00
Richard Henderson
8d8a8ab544 tests/tcg/alpha: add system boot.S
This provides the bootstrap and low level helper functions for an
alpha kernel.  We use direct access to the DP264 serial port for
test output, and hard machine halt to exit the emulation.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190501184306.15208-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-05-28 10:28:51 +01:00
Alex Bennée
7ac283e963 tests/tcg/multiarch: expand system memory test to cover more
Expand the memory test to cover move of the softmmu code. Specifically
we:

  - improve commentary
  - add some helpers (for later BE support)
  - reduce boiler plate into helpers
  - add signed reads at various sizes/offsets
  - required -DCHECK_UNALIGNED

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-28 10:28:51 +01:00
Alex Bennée
936647d3fc tests/tcg/minilib: support %c format char
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-28 10:28:51 +01:00
Alex Bennée
67f3da9d74 tests/tcg/multiarch: move the system memory test
There is nothing inherently architecture specific about the memory
test although we may have to manage different restrictions of
unaligned access across architectures.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-28 10:28:51 +01:00
Alex Bennée
f6482872f3 tests/tcg/aarch64: add system boot.S
This provides the bootstrap and low level helper functions for an
aarch64 kernel. We use semihosting to handle test output and exiting
the emulation. semihosting's parameter passing is a little funky so we
end up using the stack and pointing to that as the parameter block.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-28 10:28:51 +01:00
Alex Bennée
49d755d02e tests/tcg/multiarch: add hello world system test
This is not really i386 only, we can have the same test for all
architectures supporting system tests.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-28 10:28:51 +01:00
Alex Bennée
8041650aef tests/tcg/multiarch: add support for multiarch system tests
We can certainly support some common tests for system emulation that
make use of our minimal defined boot.S support. It will still be up to
individual architectures to ensure they build so we provide a
MULTIARCH_TESTS variable that they can tack onto TESTS themselves.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-28 10:28:51 +01:00
Max Filippov
b345e14053 target/xtensa: implement exclusive access option
The Exclusive Instructions provide a general-purpose mechanism for
atomic updates of memory-based synchronization variables that can be
used for exclusion algorithms.

Use cmpxchg-based implementation that is sufficient for the typical use
of exclusive access in atomic operations.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-05-15 10:31:52 -07:00