The original CAN_PCI config option enables multiple SJA1000 PCI boards
emulation build. These boards bridge SJA1000 into I/O or memory
address space of the host CPU and depend on SJA1000 emulation.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-Id: <dd332de687bfe52bbec37f5de1d861fb8e620d74.1600069689.git.pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Updated MAINTAINERS for CAN bus related emulation as well.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-Id: <6d1b8db69efc4e5cfad702d2150e1960e8f63572.1600069689.git.pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of the model of complete open-source/design/hardware
CAN FD controller. The IP core project has been started and is maintained
by Ondrej Ille at Czech Technical University in Prague.
CTU CAN FD project pages:
https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core
CAN bus CTU FEE Projects Listing page:
http://canbus.pages.fel.cvut.cz/
The core is mapped to PCIe card same as on one of its real hardware
adaptations. The device implementing two CTU CAN FD ip cores
is instantiated after CAN bus definition
-object can-bus,id=canbus0-bus
by QEMU parameters
-device ctucan_pci,canbus0=canbus0-bus,canbus1=canbus0-bus
Signed-off-by: Jan Charvat <charvj10@fel.cvut.cz>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-Id: <23e3ca4dcb2cc9900991016910a6cab7686c0e31.1600069689.git.pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Definitions of registers and CAN FD frame message box of CTU CAN FD
IP core are generated the specification in CACTUS/IP-XACT format.
CTU CAN FD IP core repository
https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core
The location of the CTU CAN IP core specification within
IP core design
spec/CTU/ip/CAN_FD_IP_Core/2.1/CAN_FD_IP_Core.2.1.xml
The header files are generated by pyXact_generator designed
by Ondrej Ille which is based on ipyxact_parser.
The specification is source of header files for driver and emulation,
documentation and VHDL registers map implementation.
Signed-off-by: Jan Charvat <charvj10@fel.cvut.cz>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-Id: <97ae620f724bf1d76f127aaf628f7aec3af0a11c.1600069689.git.pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paravirtualized features have been listed in KVM_GET_SUPPORTED_CPUID since
Linux 2.6.35 (commit 84478c829d0f, "KVM: x86: export paravirtual cpuid flags
in KVM_GET_SUPPORTED_CPUID", 2010-05-19). It has been more than 10 years,
so remove the fallback code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't need to use kernel-irqchip=off for irq0 override if IRQ
routing is supported by the host, which is the case since 2009
(IRQ routing was added to KVM in Linux v2.6.30).
This is a more straightforward fix for Launchpad bug #1896263, as
it doesn't require increasing the complexity of the MSR code.
kernel-irqchip=off is for debugging only and there's no need to
increase the complexity of the code just to work around an issue
that was already fixed in the kernel.
Fixes: https://bugs.launchpad.net/bugs/1896263
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200922194732.2100510-1-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU's kvmclock device is only created when KVM PV feature bits for
kvmclock (KVM_FEATURE_CLOCKSOURCE/KVM_FEATURE_CLOCKSOURCE2) are
exposed to the guest. With 'kvm=off' cpu flag the device is not
created and we don't call KVM_GET_CLOCK/KVM_SET_CLOCK upon migration.
It was reported that without these call at least Hyper-V TSC page
clocksouce (which can be enabled independently) gets broken after
migration.
Switch to creating kvmclock QEMU device unconditionally, it seems
to always make sense to call KVM_GET_CLOCK/KVM_SET_CLOCK on migration.
Use KVM_CAP_ADJUST_CLOCK check instead of CPUID feature bits.
Reported-by: Antoine Damhet <antoine.damhet@blade-group.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200922151934.899555-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VM with interrupt based APF enabled fails to migrate:
qemu-system-x86_64: error: failed to set MSR 0x4b564d02 to 0xf3
We have two issues:
1) There is a typo in kvm_put_msrs() and we write async_pf_int_msr
to MSR_KVM_ASYNC_PF_EN (instead of MSR_KVM_ASYNC_PF_INT)
2) We restore MSR_KVM_ASYNC_PF_EN before MSR_KVM_ASYNC_PF_INT is set
and this violates the check in KVM.
Re-order MSR_KVM_ASYNC_PF_EN/MSR_KVM_ASYNC_PF_INT setting (and
kvm_get_msrs() for consistency) and fix the typo.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200917102316.814804-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The exception_is_int flag may be set on entry to helper_syscall,
e.g. after a prior interrupt that has returned, and processing
EXCP_SYSCALL as an interrupt causes it to fail so clear this flag.
Signed-off-by: Douglas Crosher <dtc-ubuntu@scieneer.com>
Message-Id: <a7dab33e-eda6-f988-52e9-f3d32db7538d@scieneer.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the coding style document, we should use literal '0x' prefix
instead of printf's '#' flag (which appears as '%#' or '%0#' in the format
string). Add a checkpatch rule to enforce that.
Note that checkpatch already had a similar rule for trace-events files.
Example usage:
$ scripts/checkpatch.pl --file chardev/baum.c
...
ERROR: Don't use '#' flag of printf format ('%#') in format strings, use '0x' prefix instead
#366: FILE: chardev/baum.c:366:
+ DPRINTF("Broken packet %#2x, tossing\n", req); \
...
ERROR: Don't use '#' flag of printf format ('%#') in format strings, use '0x' prefix instead
#472: FILE: chardev/baum.c:472:
+ DPRINTF("unrecognized request %0#2x\n", req);
...
Signed-off-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Message-Id: <20200914172623.72955-1-dovmurik@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The PCMachineState type is only used under hw/i386/.
We don't need to forward-declare it for all architectures,
restrict it to the X86 one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908155530.249806-7-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xen_hvm_init() is restricted to the X86 architecture.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908155530.249806-6-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move hardware stubs unrelated from the accelerator to xen-hw-stub.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908155530.249806-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As this header use the ram_addr_t type, it has to include
"exec/cpu-common.h" to avoid odd errors such:
include/sysemu/xen.h:35:44: error: unknown type name 'ram_addr_t'; did you mean 'in_addr_t'?
35 | static inline void xen_hvm_modified_memory(ram_addr_t start, ram_addr_t length)
| ^~~~~~~~~~
| in_addr_t
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908155530.249806-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xen_hvm_init() is only meanful to initialize a X86/PC machine,
rename it as xen_hvm_init_pc().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908155530.249806-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the whole contents of the overview doc comment from object.h
to qom.rst.
This makes the documentation source easier to read and edit, and
also solves the backslash escaping issue at the typecasting macro
examples.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-10-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all example/codelisting markup to Sphinx code-block.
There are a few sections where backslashes at the end of lines
break code formatting. A comment was added noting that this is
an issue.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-8-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This indents existing code examples that are not indented yet,
just to make future conversion to Sphinx markup easier to review.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-7-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add DOC: section keyword to introduction doc comment, so it will
be rendered by kernel-doc.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-5-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use kernel-doc syntax for indicating private and public struct
fields.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-3-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kernel-doc requires all function parameters to be documented, so
document them all.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-2-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qemu_chr_write_buffer() method sends data to the chardev backend for
writing, and then also writes to the log file. In case the chardev
backend only writes part of the data buffer, we need to make sure we
only log the same subset. qemu_chr_write_buffer() will be invoked again
later to write the rest of the buffer.
In the case the chardev backend returns an error though, no further
attempts to likely to be made to write the data. We must therefore write
the entire buffer to the log immediately.
An example where this is important is with the socket backend. This will
return -1 for all writes if no client is currently connected. We still
wish to write data to the log file when no client is present though.
This used to work because the chardev would return "len" to pretend it
had written all data when no client is connected, but this changed to
return an error in
commit 271094474b
Author: Dima Stepanov <dimastep@yandex-team.ru>
Date: Thu May 28 12:11:18 2020 +0300
char-socket: return -1 in case of disconnect during tcp_chr_write
and this broke the logging, resulting in all data being discarded when
no client is present.
Fixes: https://bugs.launchpad.net/qemu/+bug/1893691
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
it's was deprecated since 3.1
Support for invalid topologies is removed, the user must ensure
that topologies described with -smp include all possible cpus,
i.e. (sockets * cores * threads) == maxcpus or QEMU will
exit with error.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by:
Message-Id: <20200911133202.938754-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 660f793093 was a bit overzealous
with respect to tests/tcg, which needed quiet-command and $(BUILD_DIR).
Reinstate quiet-command, and replace $(BUILD_DIR) with just the
current directory.
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The order of the add_project_link_arguments calls impacts which
arguments are placed between --start-group and --end-group.
OSS-Fuzz coverage builds seem to just add these to CFLAGS:
-fprofile-instr-generate -fcoverage-mapping pthread -Wl,--no-as-needed
-Wl,-ldl -Wl,-lm Wno-unused-command-line-argument
The -Wl,-ldl flag that is enough to shift the fork_fuzz.ld linker-script
back into the linker group. Move the linker-script meson call before the
other calls to make sure the flag is placed correctly.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200909220516.614222-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200918130354.1879275-1-anthony.perard@citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Running checkpatch on a directory that contains a cover letter reports
this error:
Checking /tmp/tmpbnngauy3/0000-cover-letter.patch...
ERROR: Does not appear to be a unified-diff format patch
total: 1 errors, 0 warnings, 0 lines checked
Let's skip cover letter as it is already done in the Linux kernel
commits 06330fc40e3f ("checkpatch: avoid NOT_UNIFIED_DIFF errors
on cover-letter.patch files") and a08ffbef4ab7 ("checkpatch: fix
ignoring cover-letter logic").
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200917170212.92672-1-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Last uses of memory_region_clear_global_locking() have been
removed in commit 7070e085d4 ("acpi: mark PMTIMER as unlocked")
and commit 08565552f7 ("cputlb: Move NOTDIRTY handling from I/O
path to TLB path").
Remove memory_region_clear_global_locking() and the now unused
'global_locking' field in MemoryRegion.
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200806150726.962-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Xen accelerator requires specific changes to a machine to be able
to use it. See for example the 'Xen PC' machine configure its PCI
bus calling pc_xen_hvm_init_pci(). There is no 'Xen Q35' machine
declared. This code was probably added while introducing the Q35
machine, based on the existing PC machine (see commit df2d8b3ed4
"Introduce q35 pc based chipset emulator"). Remove the unreachable
code to simplify this file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200722082517.18708-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the installation is relocatable, there is no need to compile a
Windows-format prefix into Win32 binaries. Instead, the prefix will
only be used to compute installation-relative paths, and it can be
any string.
Drop the "Program Files" path completely: it is only usable on English
versions of Windows; therefore, using the NSIS installer to get the
"correct" path to the Program Files folder is recommended, and NSIS
works just as well with any prefix.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the function that will compute a relocated version of the
directories in CONFIG_QEMU_*DIR and CONFIG_QEMU_*PATH.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the exec_dir cannot be retrieved, just assume it's the installation
directory that was specified at configure time. This makes it simpler
to reason about what the callers will do if they get back an empty
path.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make things consistent with how softmmu/vl.c uses os_find_datadir.
Initializing the path to the executables will also be needed for
get_relocatable_path to work.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just return the directory without requiring the caller to free it.
This also removes a bogus check for NULL in os_find_datadir and
module_load_one; g_strdup of a static variable cannot return NULL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
