Commit Graph

4359 Commits

Author SHA1 Message Date
Max Reitz
65181d6381 block: Dec. drained_end_counter before bdrv_wakeup
Decrementing drained_end_counter after bdrv_dec_in_flight() (which in
turn invokes bdrv_wakeup() and thus aio_wait_kick()) is not very clever.
We should decrement it beforehand, so that any waiting aio_poll() that
is woken by bdrv_dec_in_flight() sees the decremented
drained_end_counter.

Because the time window between decrementing drained_end_counter and
aio_wait_kick() is very small, I cannot supply a reliable regression
test.  However, running e.g. the /bdrv-drain/blockjob/iothread/drain_all
test in test-bdrv-drain has a small chance of hanging without this
patch (about 1/200 or so; it gets to nearly 100 % if you add e.g. an
fputc(' ', stderr); after the bdrv_dec_in_flight()).

Fixes: e037c09c78
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190722133054.21781-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-22 18:41:35 +02:00
Maxim Levitsky
258867d1dc block/nvme: don't touch the completion entries
Completion entries are meant to be only read by the host and written by the device.
The driver is supposed to scan the completions from the last point where it left,
and until it sees a completion with non flipped phase bit.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716163020.13383-4-mlevitsk@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-22 18:40:32 +02:00
Maxim Levitsky
118d1b6a81 block/nvme: support larger that 512 bytes sector devices
Currently the driver hardcodes the sector size to 512,
and doesn't check the underlying device. Fix that.

Also fail if underlying nvme device is formatted with metadata
as this needs special support.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20190716163020.13383-3-mlevitsk@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-22 18:40:32 +02:00
Maxim Levitsky
461bba04bf block/nvme: fix doorbell stride
Fix the math involving non standard doorbell stride

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716163020.13383-2-mlevitsk@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-22 18:40:32 +02:00
Peter Maydell
b9e02bb3f9 nbd patches for 2019-07-19
- silence harmless compiler/valgrind warning
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJdMiVIAAoJEKeha0olJ0NqhSkH/RF4EViyGi/BW9rHHmZIKQjL
 h71g+Y5l0QvTHW2qkU9UCjYC7lrhTnD8r06v2qQZCk37Rb0z/y8BGpcZQVE92nPt
 GW5VbqWh4IdNCMUNXlfFo/U2t+hJL+BAAd8OkolKcDU4FUuN9QGkvQztBLb6Edzk
 oz4/NbnFsd87TRI61EjOEspTpTO6cukLRmE0HIsL8KOaYo3E7QhgxRvR45Y58sbN
 TvUTpI0teHzo4MiXD/yRH8oDz7zKttFwAj3E0oU9IcVTyBJXpE8lNA4J2a65KdbH
 S+43tlNDJA1a5+OqyfzFHcgz6nLCcntU4+5LH7YfTy753EurDVqsi7vTo4lJqHM=
 =uPfp
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-07-19' into staging

nbd patches for 2019-07-19

- silence harmless compiler/valgrind warning

# gpg: Signature made Fri 19 Jul 2019 21:17:12 BST
# gpg:                using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg:                 aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2019-07-19:
  nbd: Initialize reply on failure

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-22 10:11:28 +01:00
Eric Blake
5cf42b1c1f nbd: Initialize reply on failure
We've had two separate reports of different callers running into use
of uninitialized data if s->quit is set (one detected by gcc -O3,
another by valgrind), due to checking 'nbd_reply_is_simple(reply) ||
s->quit' in the wrong order. Rather than chasing down which callers
need to pre-initialize reply, and whether there are any other
uninitialized uses, it's easier to guarantee that reply will always be
set by nbd_co_receive_one_chunk() even on failure.

The uninitialized use happens to be harmless (the only time the
variable is uninitialized is if s->quit is set, so the conditional
results in the same action regardless of what was read from reply),
and was introduced in commit 65e01d47.

In fixing the problem, it can also be seen that all (one) callers pass
in a non-NULL reply, so there is a dead conditional to also be cleaned
up.

Reported-by: Thomas Huth <thuth@redhat.com>
Reported-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190719172001.19770-1-eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-19 13:19:18 -05:00
Max Reitz
61ad631cee block: Loop unsafely in bdrv*drained_end()
The graph must not change in these loops (or a QLIST_FOREACH_SAFE would
not even be enough).  We now ensure this by only polling once in the
root bdrv_drained_end() call, so we can drop the _SAFE suffix.  Doing so
makes it clear that the graph must not change.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-19 13:19:17 +02:00
Max Reitz
e037c09c78 block: Do not poll in bdrv_do_drained_end()
We should never poll anywhere in bdrv_do_drained_end() (including its
recursive callees like bdrv_drain_invoke()), because it does not cope
well with graph changes.  In fact, it has been written based on the
postulation that no graph changes will happen in it.

Instead, the callers that want to poll must poll, i.e. all currently
globally available wrappers: bdrv_drained_end(),
bdrv_subtree_drained_end(), bdrv_unapply_subtree_drain(), and
bdrv_drain_all_end().  Graph changes there do not matter.

They can poll simply by passing a pointer to a drained_end_counter and
wait until it reaches 0.

This patch also adds a non-polling global wrapper for
bdrv_do_drained_end() that takes a drained_end_counter pointer.  We need
such a variant because now no function called anywhere from
bdrv_do_drained_end() must poll.  This includes
BdrvChildRole.drained_end(), which already must not poll according to
its interface documentation, but bdrv_child_cb_drained_end() just
violates that by invoking bdrv_drained_end() (which does poll).
Therefore, BdrvChildRole.drained_end() must take a *drained_end_counter
parameter, which bdrv_child_cb_drained_end() can pass on to the new
bdrv_drained_end_no_poll() function.

Note that we now have a pattern of all drained_end-related functions
either polling or receiving a *drained_end_counter to let the caller
poll based on that.

A problem with a single poll loop is that when the drained section in
bdrv_set_aio_context_ignore() ends, some nodes in the subgraph may be in
the old contexts, while others are in the new context already.  To let
the collective poll in bdrv_drained_end() work correctly, we must not
hold a lock to the old context, so that the old context can make
progress in case it is different from the current context.

(In the process, remove the comment saying that the current context is
always the old context, because it is wrong.)

In all other places, all nodes in a subtree must be in the same context,
so we can just poll that.  The exception of course is
bdrv_drain_all_end(), but that always runs in the main context, so we
can just poll NULL (like bdrv_drain_all_begin() does).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-19 13:19:16 +02:00
Max Reitz
f4c8a43be0 block: Make bdrv_parent_drained_[^_]*() static
These functions are not used outside of block/io.c, there is no reason
why they should be globally available.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-19 13:19:16 +02:00
Max Reitz
8e1da77e6e block: Add @drained_end_counter
Callers can now pass a pointer to an integer that bdrv_drain_invoke()
(and its recursive callees) will increment for every
bdrv_drain_invoke_entry() operation they schedule.
bdrv_drain_invoke_entry() in turn will decrement it once it has invoked
BlockDriver.bdrv_co_drain_end().

We use atomic operations to access the pointee, because the
bdrv_do_drained_end() caller may wish to end drained sections for
multiple nodes in different AioContexts (bdrv_drain_all_end() does, for
example).

This is the first step to moving the polling for BdrvCoDrainData.done to
become true out of bdrv_drain_invoke() and into the root drained_end
function.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-19 13:19:16 +02:00
Max Reitz
804db8ea00 block: Introduce BdrvChild.parent_quiesce_counter
Commit 5cb2737e92 laid out why
bdrv_do_drained_end() must decrement the quiesce_counter after
bdrv_drain_invoke().  It did not give a very good reason why it has to
happen after bdrv_parent_drained_end(), instead only claiming symmetry
to bdrv_do_drained_begin().

It turns out that delaying it for so long is wrong.

Situation: We have an active commit job (i.e. a mirror job) from top to
base for the following graph:

                  filter
                    |
                  [file]
                    |
                    v
top --[backing]--> base

Now the VM is closed, which results in the job being cancelled and a
bdrv_drain_all() happening pretty much simultaneously.

Beginning the drain means the job is paused once whenever one of its
nodes is quiesced.  This is reversed when the drain ends.

With how the code currently is, after base's drain ends (which means
that it will have unpaused the job once), its quiesce_counter remains at
1 while it goes to undrain its parents (bdrv_parent_drained_end()).  For
some reason or another, undraining filter causes the job to be kicked
and enter mirror_exit_common(), where it proceeds to invoke
block_job_remove_all_bdrv().

Now base will be detached from the job.  Because its quiesce_counter is
still 1, it will unpause the job once more.  So in total, undraining
base will unpause the job twice.  Eventually, this will lead to the
job's pause_count going negative -- well, it would, were there not an
assertion against this, which crashes qemu.

The general problem is that if in bdrv_parent_drained_end() we undrain
parent A, and then undrain parent B, which then leads to A detaching the
child, bdrv_replace_child_noperm() will undrain A as if we had not done
so yet; that is, one time too many.

It follows that we cannot decrement the quiesce_counter after invoking
bdrv_parent_drained_end().

Unfortunately, decrementing it before bdrv_parent_drained_end() would be
wrong, too.  Imagine the above situation in reverse: Undraining A leads
to B detaching the child.  If we had already decremented the
quiesce_counter by that point, bdrv_replace_child_noperm() would undrain
B one time too little; because it expects bdrv_parent_drained_end() to
issue this undrain.  But bdrv_parent_drained_end() won't do that,
because B is no longer a parent.

Therefore, we have to do something else.  This patch opts for
introducing a second quiesce_counter that counts how many times a
child's parent has been quiesced (though c->role->drained_*).  With
that, bdrv_replace_child_noperm() just has to undrain the parent exactly
that many times when removing a child, and it will always be right.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-19 13:19:16 +02:00
Peter Maydell
697f59243f * VFIO bugfix for AMD SEV (Alex)
* Kconfig improvements (Julio, Philippe)
 * MemoryRegion reference counting bugfix (King Wang)
 * Build system cleanups (Marc-André, myself)
 * rdmacm-mux off-by-one (Marc-André)
 * ZBC passthrough fixes (Shinichiro, myself)
 * WHPX build fix (Stefan)
 * char-pty fix (Wei Yang)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJdLX1PAAoJEL/70l94x66DQ1YH/im8BbRRRPsm3Qg55fTolcWN
 0+dm/Vfv2P7nfxDMsZ4S+jrvCaCWOZb6ua75TdB74VIXpJTGPU7a3JxyTzRueP+2
 c4WH3owT8x9e4iyLNGZoIDAKtJXLSX6FInjHKTkupLVbs2UpAh0Mipq4zIoIambl
 wf83jFmJ6KCemayE9gfw8Z45YTJcLceIOLaEyXgqrPoHXTmerEj5ZMMIqEMag3W/
 dKszhVjRb6En5Ldn0jEqeC5fU10tKIs+y7VNwdJ8CZw41daBDiXDVmXemJyTF/Xn
 SYJCwrJUSdVU42AE2xXCpBfANCh7eGyg4loCitLv8Z393tN7bRufULsnM/rEreI=
 =tEVO
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* VFIO bugfix for AMD SEV (Alex)
* Kconfig improvements (Julio, Philippe)
* MemoryRegion reference counting bugfix (King Wang)
* Build system cleanups (Marc-André, myself)
* rdmacm-mux off-by-one (Marc-André)
* ZBC passthrough fixes (Shinichiro, myself)
* WHPX build fix (Stefan)
* char-pty fix (Wei Yang)

# gpg: Signature made Tue 16 Jul 2019 08:31:27 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  vl: make sure char-pty message displayed by moving setbuf to the beginning
  create_config: remove $(CONFIG_SOFTMMU) hack
  Makefile: do not repeat $(CONFIG_SOFTMMU) in hw/Makefile.objs
  hw/usb/Kconfig: USB_XHCI_NEC requires USB_XHCI
  hw/usb/Kconfig: Add CONFIG_USB_EHCI_PCI
  target/i386: sev: Do not unpin ram device memory region
  checkpatch: detect doubly-encoded UTF-8
  hw/lm32/Kconfig: Milkymist One provides a USB 1.1 Controller
  util: merge main-loop.c and iohandler.c
  Fix broken build with WHPX enabled
  memory: unref the memory region in simplify flatview
  hw/i386: turn off vmport if CONFIG_VMPORT is disabled
  rdmacm-mux: fix strcpy string warning
  build-sys: remove slirp cflags from main-loop.o
  iscsi: base all handling of check condition on scsi_sense_to_errno
  iscsi: fix busy/timeout/task set full
  scsi: add guest-recoverable ZBC errors
  scsi: explicitly list guest-recoverable sense codes
  scsi-disk: pass sense correctly for guest-recoverable errors

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-16 15:08:29 +01:00
Stefano Garzarella
0b1847bbc2 gluster: fix .bdrv_reopen_prepare when backing file is a JSON object
When the backing_file is specified as a JSON object, the
qemu_gluster_reopen_prepare() fails with this message:
    invalid URI json:{"server.0.host": ...}

In this case, we should call qemu_gluster_init() using the QDict
'state->options' that contains the JSON parameters already parsed.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1542445
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20190715132844.506584-1-sgarzare@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-15 15:48:41 +02:00
Max Reitz
8441d82d51 block/stream: Swap backing file change order
bdrv_change_backing_file() can result in yields.  Therefore, @base may
no longer be the the backing_bs() of s->bottom afterwards.

Just swap the order of the two calls to fix this.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190703172813.6868-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-15 15:48:40 +02:00
Max Reitz
17a7c39248 block/stream: Fix error path
As of commit c624b015bf, the stream job
only freezes the chain until the overlay of the base node.  The error
path must consider this.

Fixes: c624b015bf
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190703172813.6868-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-15 15:48:40 +02:00
Max Reitz
e5182c1c57 block: Add BDS.never_freeze
The commit and the mirror block job must be able to drop their filter
node at any point.  However, this will not be possible if any of the
BdrvChild links to them is frozen.  Therefore, we need to prevent them
from ever becoming frozen.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190703172813.6868-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-15 15:48:40 +02:00
Michal Privoznik
95667c3be0 nvme: Set number of queues later in nvme_init()
When creating the admin queue in nvme_init() the variable that
holds the number of queues created is modified before actual
queue creation. This is a problem because if creating the queue
fails then the variable is left in inconsistent state. This was
actually observed when I tried to hotplug a nvme disk. The
control got to nvme_file_open() which called nvme_init() which
failed and thus nvme_close() was called which in turn called
nvme_free_queue_pair() with queue being NULL. This lead to an
instant crash:

  #0  0x000055d9507ec211 in nvme_free_queue_pair (bs=0x55d952ddb880, q=0x0) at block/nvme.c:164
  #1  0x000055d9507ee180 in nvme_close (bs=0x55d952ddb880) at block/nvme.c:729
  #2  0x000055d9507ee3d5 in nvme_file_open (bs=0x55d952ddb880, options=0x55d952bb1410, flags=147456, errp=0x7ffd8e19e200) at block/nvme.c:781
  #3  0x000055d9507629f3 in bdrv_open_driver (bs=0x55d952ddb880, drv=0x55d95109c1e0 <bdrv_nvme>, node_name=0x0, options=0x55d952bb1410, open_flags=147456, errp=0x7ffd8e19e310) at block.c:1291
  #4  0x000055d9507633d6 in bdrv_open_common (bs=0x55d952ddb880, file=0x0, options=0x55d952bb1410, errp=0x7ffd8e19e310) at block.c:1551
  #5  0x000055d950766881 in bdrv_open_inherit (filename=0x0, reference=0x0, options=0x55d952bb1410, flags=32768, parent=0x55d9538ce420, child_role=0x55d950eaade0 <child_file>, errp=0x7ffd8e19e510) at block.c:3063
  #6  0x000055d950765ae4 in bdrv_open_child_bs (filename=0x0, options=0x55d9541cdff0, bdref_key=0x55d950af33aa "file", parent=0x55d9538ce420, child_role=0x55d950eaade0 <child_file>, allow_none=true, errp=0x7ffd8e19e510) at block.c:2712
  #7  0x000055d950766633 in bdrv_open_inherit (filename=0x0, reference=0x0, options=0x55d9541cdff0, flags=0, parent=0x0, child_role=0x0, errp=0x7ffd8e19e908) at block.c:3011
  #8  0x000055d950766dba in bdrv_open (filename=0x0, reference=0x0, options=0x55d953d00390, flags=0, errp=0x7ffd8e19e908) at block.c:3156
  #9  0x000055d9507cb635 in blk_new_open (filename=0x0, reference=0x0, options=0x55d953d00390, flags=0, errp=0x7ffd8e19e908) at block/block-backend.c:389
  #10 0x000055d950465ec5 in blockdev_init (file=0x0, bs_opts=0x55d953d00390, errp=0x7ffd8e19e908) at blockdev.c:602

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-id: 927aae40b617ba7d4b6c7ffe74e6d7a2595f8e86.1562770546.git.mprivozn@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-15 15:48:40 +02:00
Paolo Bonzini
8c460269aa iscsi: base all handling of check condition on scsi_sense_to_errno
Now that scsi-disk is not using scsi_sense_to_errno to separate guest-recoverable
sense codes, we can modify it to simplify iscsi's own sense handling.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15 11:20:42 +02:00
Paolo Bonzini
00e3cccdf4 iscsi: fix busy/timeout/task set full
In this case, do_retry was set without calling aio_co_wake, thus never
waking up the coroutine.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15 11:20:42 +02:00
Maxim Levitsky
867eccfed8 file-posix: Use max transfer length/segment count only for SCSI passthrough
Regular kernel block devices (/dev/sda*, /dev/nvme*, etc) don't have
max segment size/max segment count hardware requirements exposed
to the userspace, but rather the kernel block layer
takes care to split the incoming requests that
violate these requirements.

Allowing the kernel to do the splitting allows qemu to avoid
various overheads that arise otherwise from this.

This is especially visible in nbd server,
exposing as a raw file, a mostly empty qcow2 image over the net.
In this case most of the reads by the remote user
won't even hit the underlying kernel block device,
and therefore most of the  overhead will be in the
nbd traffic which increases significantly with lower max transfer size.

In addition to that even for local block device
access the peformance improves a bit due to less
traffic between qemu and the kernel when large
transfer sizes are used (e.g for image conversion)

More info can be found at:
https://bugzilla.redhat.com/show_bug.cgi?id=1647104

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-12 15:42:23 +02:00
Eric Blake
f7077c9860 qcow2: Allow -o compat=v3 during qemu-img amend
Commit b76b4f60 allowed '-o compat=v3' as an alias for the
less-appealing '-o compat=1.1' for 'qemu-img create' since we want to
use the QMP form as much as possible, but forgot to do likewise for
qemu-img amend.  Also, it doesn't help that '-o help' doesn't list our
new preferred spellings.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-08 16:00:31 +02:00
John Snow
197bfa7da7 block/qcow: Improve error when opening qcow2 files as qcow
Reported-by: radmehrsaeed7@gmail.com
Fixes: https://bugs.launchpad.net/bugs/1832914
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-08 16:00:26 +02:00
Andrey Shinkevich
c624b015bf block/stream: introduce a bottom node
The bottom node is the intermediate block device that has the base as its
backing image. It is used instead of the base node while a block stream
job is running to avoid dependency on the base that may change due to the
parallel jobs. The change may take place due to a filter node as well that
is inserted between the base and the intermediate bottom node. It occurs
when the base node is the top one for another commit or stream job.
After the introduction of the bottom node, don't freeze its backing child,
that's the base, anymore.

Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1559152576-281803-4-git-send-email-andrey.shinkevich@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-02 03:53:05 +02:00
Andrey Shinkevich
96a07d5bf4 block/stream: refactor stream_run: drop goto
The goto is unnecessary in the stream_run() since the common exit
code was removed in the commit eb23654dbe:
"jobs: utilize job_exit shim".

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1559152576-281803-3-git-send-email-andrey.shinkevich@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-02 03:53:04 +02:00
Andrey Shinkevich
170d3bd341 block: include base when checking image chain for block allocation
This patch is used in the 'block/stream: introduce a bottom node'
that is following. Instead of the base node, the caller may pass
the node that has the base as its backing image to the function
bdrv_is_allocated_above() with a new parameter include_base = true
and get rid of the dependency on the base that may change during
commit/stream parallel jobs. Now, if the specified base is not
found in the backing image chain, the QEMU will abort.

Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1559152576-281803-2-git-send-email-andrey.shinkevich@virtuozzo.com
[mreitz: Squashed in the following as a rebase on conflicting patches:]
Message-id: e3cf99ae-62e9-8b6e-5a06-d3c8b9363b85@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-02 03:53:04 +02:00
Stefano Garzarella
d24f80234b block/rbd: increase dynamically the image size
RBD APIs don't allow us to write more than the size set with
rbd_create() or rbd_resize().
In order to support growing images (eg. qcow2), we resize the
image before write operations that exceed the current size.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20190509145927.293369-1-sgarzare@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-02 03:53:04 +02:00
Pino Toscano
b10d49d761 ssh: switch from libssh2 to libssh
Rewrite the implementation of the ssh block driver to use libssh instead
of libssh2.  The libssh library has various advantages over libssh2:
- easier API for authentication (for example for using ssh-agent)
- easier API for known_hosts handling
- supports newer types of keys in known_hosts

Use APIs/features available in libssh 0.8 conditionally, to support
older versions (which are not recommended though).

Adjust the iotest 207 according to the different error message, and to
find the default key type for localhost (to properly compare the
fingerprint with).
Contributed-by: Max Reitz <mreitz@redhat.com>

Adjust the various Docker/Travis scripts to use libssh when available
instead of libssh2. The mingw/mxe testing is dropped for now, as there
are no packages for it.

Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190620200840.17655-1-ptoscano@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 5873173.t2JhDm7DL7@lindworm.usersys.redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-24 16:01:04 +02:00
Sam Eiderman
98eb9733f4 vmdk: Add read-only support for seSparse snapshots
Until ESXi 6.5 VMware used the vmfsSparse format for snapshots (VMDK3 in
QEMU).

This format was lacking in the following:

    * Grain directory (L1) and grain table (L2) entries were 32-bit,
      allowing access to only 2TB (slightly less) of data.
    * The grain size (default) was 512 bytes - leading to data
      fragmentation and many grain tables.
    * For space reclamation purposes, it was necessary to find all the
      grains which are not pointed to by any grain table - so a reverse
      mapping of "offset of grain in vmdk" to "grain table" must be
      constructed - which takes large amounts of CPU/RAM.

The format specification can be found in VMware's documentation:
https://www.vmware.com/support/developer/vddk/vmdk_50_technote.pdf

In ESXi 6.5, to support snapshot files larger than 2TB, a new format was
introduced: SESparse (Space Efficient).

This format fixes the above issues:

    * All entries are now 64-bit.
    * The grain size (default) is 4KB.
    * Grain directory and grain tables are now located at the beginning
      of the file.
      + seSparse format reserves space for all grain tables.
      + Grain tables can be addressed using an index.
      + Grains are located in the end of the file and can also be
        addressed with an index.
      - seSparse vmdks of large disks (64TB) have huge preallocated
        headers - mainly due to L2 tables, even for empty snapshots.
    * The header contains a reverse mapping ("backmap") of "offset of
      grain in vmdk" to "grain table" and a bitmap ("free bitmap") which
      specifies for each grain - whether it is allocated or not.
      Using these data structures we can implement space reclamation
      efficiently.
    * Due to the fact that the header now maintains two mappings:
        * The regular one (grain directory & grain tables)
        * A reverse one (backmap and free bitmap)
      These data structures can lose consistency upon crash and result
      in a corrupted VMDK.
      Therefore, a journal is also added to the VMDK and is replayed
      when the VMware reopens the file after a crash.

Since ESXi 6.7 - SESparse is the only snapshot format available.

Unfortunately, VMware does not provide documentation regarding the new
seSparse format.

This commit is based on black-box research of the seSparse format.
Various in-guest block operations and their effect on the snapshot file
were tested.

The only VMware provided source of information (regarding the underlying
implementation) was a log file on the ESXi:

    /var/log/hostd.log

Whenever an seSparse snapshot is created - the log is being populated
with seSparse records.

Relevant log records are of the form:

[...] Const Header:
[...]  constMagic     = 0xcafebabe
[...]  version        = 2.1
[...]  capacity       = 204800
[...]  grainSize      = 8
[...]  grainTableSize = 64
[...]  flags          = 0
[...] Extents:
[...]  Header         : <1 : 1>
[...]  JournalHdr     : <2 : 2>
[...]  Journal        : <2048 : 2048>
[...]  GrainDirectory : <4096 : 2048>
[...]  GrainTables    : <6144 : 2048>
[...]  FreeBitmap     : <8192 : 2048>
[...]  BackMap        : <10240 : 2048>
[...]  Grain          : <12288 : 204800>
[...] Volatile Header:
[...] volatileMagic     = 0xcafecafe
[...] FreeGTNumber      = 0
[...] nextTxnSeqNumber  = 0
[...] replayJournal     = 0

The sizes that are seen in the log file are in sectors.
Extents are of the following format: <offset : size>

This commit is a strict implementation which enforces:
    * magics
    * version number 2.1
    * grain size of 8 sectors  (4KB)
    * grain table size of 64 sectors
    * zero flags
    * extent locations

Additionally, this commit proivdes only a subset of the functionality
offered by seSparse's format:
    * Read-only
    * No journal replay
    * No space reclamation
    * No unmap support

Hence, journal header, journal, free bitmap and backmap extents are
unused, only the "classic" (L1 -> L2 -> data) grain access is
implemented.

However there are several differences in the grain access itself.
Grain directory (L1):
    * Grain directory entries are indexes (not offsets) to grain
      tables.
    * Valid grain directory entries have their highest nibble set to
      0x1.
    * Since grain tables are always located in the beginning of the
      file - the index can fit into 32 bits - so we can use its low
      part if it's valid.
Grain table (L2):
    * Grain table entries are indexes (not offsets) to grains.
    * If the highest nibble of the entry is:
        0x0:
            The grain in not allocated.
            The rest of the bytes are 0.
        0x1:
            The grain is unmapped - guest sees a zero grain.
            The rest of the bits point to the previously mapped grain,
            see 0x3 case.
        0x2:
            The grain is zero.
        0x3:
            The grain is allocated - to get the index calculate:
            ((entry & 0x0fff000000000000) >> 48) |
            ((entry & 0x0000ffffffffffff) << 12)
    * The difference between 0x1 and 0x2 is that 0x1 is an unallocated
      grain which results from the guest using sg_unmap to unmap the
      grain - but the grain itself still exists in the grain extent - a
      space reclamation procedure should delete it.
      Unmapping a zero grain has no effect (0x2 will not change to 0x1)
      but unmapping an unallocated grain will (0x0 to 0x1) - naturally.

In order to implement seSparse some fields had to be changed to support
both 32-bit and 64-bit entry sizes.

Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Eyal Moscovici <eyal.moscovici@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Message-id: 20190620091057.47441-4-shmuel.eiderman@oracle.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-24 15:53:02 +02:00
Sam Eiderman
59d6ee4850 vmdk: Reduce the max bound for L1 table size
512M of L1 entries is a very loose bound, only 32M are required to store
the maximal supported VMDK file size of 2TB.

Fixed qemu-iotest 59# - now failure occures before on impossible L1
table size.

Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Eyal Moscovici <eyal.moscovici@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Message-id: 20190620091057.47441-3-shmuel.eiderman@oracle.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-24 15:53:02 +02:00
Sam Eiderman
940a2cd5d2 vmdk: Fix comment regarding max l1_size coverage
Commit b0651b8c24 ("vmdk: Move l1_size check into vmdk_add_extent")
extended the l1_size check from VMDK4 to VMDK3 but did not update the
default coverage in the moved comment.

The previous vmdk4 calculation:

    (512 * 1024 * 1024) * 512(l2 entries) * 65536(grain) = 16PB

The added vmdk3 calculation:

    (512 * 1024 * 1024) * 4096(l2 entries) * 512(grain) = 1PB

Adding the calculation of vmdk3 to the comment.

In any case, VMware does not offer virtual disks more than 2TB for
vmdk4/vmdk3 or 64TB for the new undocumented seSparse format which is
not implemented yet in qemu.

Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Eyal Moscovici <eyal.moscovici@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Message-id: 20190620091057.47441-2-shmuel.eiderman@oracle.com
Reviewed-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-24 15:53:02 +02:00
Max Reitz
a193ad3b3b block/commit: Drop bdrv_child_try_set_perm()
commit_top_bs never requests or unshares any permissions.  There is no
reason to make this so explicit here.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18 16:41:10 +02:00
Max Reitz
f94dc3b414 block/mirror: Fix child permissions
We cannot use bdrv_child_try_set_perm() to give up all restrictions on
the child edge, and still have bdrv_mirror_top_child_perm() request
BLK_PERM_WRITE.  Fix this by making bdrv_mirror_top_child_perm() return
0/BLK_PERM_ALL when we want to give up all permissions, and replacing
bdrv_child_try_set_perm() by bdrv_child_refresh_perms().

The bdrv_child_try_set_perm() before removing the node with
bdrv_replace_node() is then unnecessary.  No permissions have changed
since the previous invocation of bdrv_child_try_set_perm().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18 16:41:10 +02:00
Max Reitz
094e363944 file-posix: Update open_flags in raw_set_perm()
raw_check_perm() + raw_set_perm() can change the flags associated with
the current FD.  If so, we have to update BDRVRawState.open_flags
accordingly.  Otherwise, we may keep reopening the FD even though the
current one already has the correct flags.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18 16:41:10 +02:00
Vladimir Sementsov-Ogievskiy
b23c580c94 block: drop bs->job
Drop remaining users of bs->job:
1. assertions actually duplicated by assert(!bs->refcnt)
2. trace-point seems not enough reason to change stream_start to return
   BlockJob pointer
3. Restricting creation of two jobs based on same bs is bad idea, as
   3.1 Some jobs creates filters to be their main node, so, this check
   don't actually prevent creating second job on same real node (which
   will create another filter node) (but I hope it is restricted by
   other mechanisms)
   3.2 Even without bs->job we have two systems of permissions:
   op-blockers and BLK_PERM
   3.3 We may want to run several jobs on one node one day

And finally, drop bs->job pointer itself. Hurrah!

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18 16:41:10 +02:00
Vladimir Sementsov-Ogievskiy
68d00e4293 block/block-backend: blk_iostatus_reset: drop usage of bs->job
We are going to remove bs->job pointer. Drop it's usage in
blk_iostatus_reset.

blk_iostatus_reset() has only two callers:

1. blk_attach_dev(). This doesn't have anything to do with jobs and
    attaching a new guest device won't solve any problem the job
    encountered, so no reason to reset the iostatus for the job.

2. qmp_cont(). This resets the iostatus for everything. We can just
    call block_job_iostatus_reset() for all block jobs instead of going
    through BlockBackend.

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18 16:41:10 +02:00
Vladimir Sementsov-Ogievskiy
cc19f1773d block/replication: drop usage of bs->job
We are going to remove bs->job pointer. Drop it's usage in replication
code. Additionally we have to return job pointer from some mirror APIs.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18 16:41:09 +02:00
Max Reitz
1adb0b5e0f blkdebug: Inject errors on .bdrv_co_block_status()
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-14 14:16:57 +02:00
Max Reitz
f8cec157cb blkdebug: Add "none" event
Together with @iotypes and @sector, this can be used to trap e.g. the
first read or write access to a certain sector without having to know
what happens internally in the block layer, i.e. which "real" events
happen right before such an access.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-14 14:16:57 +02:00
Max Reitz
16789db3de blkdebug: Add @iotype error option
This new error option allows users of blkdebug to inject errors only on
certain kinds of I/O operations.  Users usually want to make a very
specific operation fail, not just any; but right now they simply hope
that the event that triggers the error injection is followed up with
that very operation.  That may not be true, however, because the block
layer is changing (including blkdebug, which may increase the number of
types of I/O operations on which to inject errors).

The new option's default has been chosen to keep backwards
compatibility.

Note that similar to the internal representation, we could choose to
expose this option as a list of I/O types.  But there is no practical
use for this, because as described above, users usually know exactly
which kind of operation they want to make fail, so there is no need to
specify multiple I/O types at once.  In addition, exposing this option
as a list would require non-trivial changes to qemu_opts_absorb_qdict().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-14 14:16:57 +02:00
Vladimir Sementsov-Ogievskiy
611ae1d716 block/nbd: merge NBDClientSession struct back to BDRVNBDState
No reason to keep it separate, it differs from others block driver
behavior and therefore confuses. Instead of generic
  'state = (State*)bs->opaque' we have to use special helper.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190611102720.86114-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-06-13 10:00:42 -05:00
Vladimir Sementsov-Ogievskiy
86f8cdf3db block/nbd: merge nbd-client.* to nbd.c
No reason for keeping driver handlers realization separate from driver
structure. We can get rid of extra header file.

While being here, fix comments style, restore forgotten comments for
NBD_FOREACH_REPLY_CHUNK and nbd_reply_chunk_iter_receive, remove extra
includes.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190611102720.86114-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-06-13 09:55:09 -05:00
Vladimir Sementsov-Ogievskiy
0a93b359db block/nbd-client: drop stale logout
Drop one on failure path (we have errp) and turn two others into trace
points.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190611102720.86114-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-06-13 09:35:53 -05:00
Stefano Garzarella
2ea8e96da2 block/gluster: update .help of BLOCK_OPT_PREALLOC option
Add missing 'falloc' among the allowed values of 'preallocation'
option; show it and 'full' only when they are supported.
('falloc' is supported if defined CONFIG_GLUSTERFS_FALLOCATE,
'full' is supported if defined CONFIG_GLUSTERFS_ZEROFILL)

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190524075848.23781-4-sgarzare@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-12 18:32:32 +02:00
Stefano Garzarella
abea00533f block/file-posix: update .help of BLOCK_OPT_PREALLOC option
Show 'falloc' among the allowed values of 'preallocation'
option, only when it is supported (if defined CONFIG_POSIX_FALLOCATE)

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190524075848.23781-3-sgarzare@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-12 18:31:46 +02:00
Markus Armbruster
a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Markus Armbruster
0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Markus Armbruster
856dfd8a03 qemu-common: Move qemu_isalnum() etc. to qemu/ctype.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-11 20:22:09 +02:00
Vladimir Sementsov-Ogievskiy
d93e572688 block/io: bdrv_pdiscard: support int64_t bytes parameter
This fixes at least one overflow in qcow2_process_discards, which
passes 64bit region length to bdrv_pdiscard where bytes (or sectors in
the past) parameter is int since its introduction in 0b919fae.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04 16:55:58 +02:00
Vladimir Sementsov-Ogievskiy
1477b6c803 block/qcow2-refcount: add trace-point to qcow2_process_discards
Let's at least trace ignored failure.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04 16:55:58 +02:00
Kevin Wolf
d0ee0204f4 block: Remove wrong bdrv_set_aio_context() calls
The mirror and commit block jobs use bdrv_set_aio_context() to move
their filter node into the right AioContext before hooking it up in the
graph. Similarly, bdrv_open_backing_file() explicitly moves the backing
file node into the right AioContext first.

This isn't necessary any more, they get automatically moved into the
right context now when attaching them.

However, in the case of bdrv_open_backing_file() with a node reference,
it's actually not only unnecessary, but even wrong: The unchecked
bdrv_set_aio_context() changes the AioContext of the child node even if
other parents require it to retain the old context. So this is not only
a simplification, but a bug fix, too.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1684342
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04 15:22:22 +02:00