Use the SCLP_EVENT() QOM type-checking macro to avoid DO_UPCAST().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230212225144.58660-16-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The code currently uses -nostartfiles, but this does not prevent
linking with libc. On Fedora there is no cross-libc, so the linking
step fails.
Fix by using the more comprehensive -nostdlib (that's also what
probe_target_compiler() checks for as well).
Fixes: 503e549e44 ("tests/tcg/s390x: Test unaligned accesses to lowcore")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230131182057.2261614-1-iii@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The virtconsole device might not be present in the QEMU build that is
being tested.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230213210738.9719-5-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If we build with --without-default-devices, CONFIG_HPET and
CONFIG_PARALLEL are set to N, which makes the respective devices go
missing from acpi tables.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230208194700.11035-13-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Check that virtio-scsi-pci is present in the QEMU build before running
the tests.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230208194700.11035-12-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Do not include tests that require devices that are not available in
the QEMU build.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230208194700.11035-10-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We should not mix declarations and statements in QEMU code.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-7-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Don't include tests that require devices not available in the QEMU
binary.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230208194700.11035-6-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This test depends on the presence of the pcie-root-port device. Add a
build time dependency.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-4-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests are built once for all the targets, so as long as one QEMU
binary is built with CONFIG_LSI_SCSI_PCI=y, this test will
run. However some binaries might not include the device. So check this
again in runtime.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-3-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Check if the devices we're trying to add are present in the QEMU
binary. They could have been removed from the build via Kconfig or the
--without-default-devices option.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-2-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Include it in the .c files instead that use the error reporting
functions.
Message-Id: <20230210111931.1115489-1-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Include "hw/registerfields.h" in the .c files instead (if needed).
Message-Id: <20230210112315.1116966-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's been deprecated since QEMU v6.2, so it should be OK to
finally remove this now.
Message-Id: <20230209161540.1054669-1-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The npcm7xx_pwm-test produces a lot of output at V=1, which
means that on our CI tests the log files exceed the gitlab
500KB limit. Suppress the messages about exactly what is
being tested unless at V=2 and above.
This follows the pattern we use with qom-test.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230209135047.1753081-1-peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As gprof relies on instrumentation you rarely get useful data compared
to a real optimised build. Lets deprecate the build option and
simplify the CI configuration as a result.
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1338
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230131094224.861621-1-alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Static QEMU build fails on Debian Bullseye:
/usr/bin/ld: /usr/lib/x86_64-linux-gnu/libdw.a(debuginfod-client.o): in function `__libdwfl_debuginfod_init':
(.text.startup+0x17): undefined reference to `dlopen'
The reason is that pkg-config does not suggest -ldl for libdw, and
adding --extra-ldflags="-ldl" resolves the issue. However, static
linking with libdw is an unclear topic:
* Linux perf does it.
* Debian's libdw-dev description says:
Only link to the static version for special cases and when you
don't need anything from the ebl backends.
* As the error message above indicates, -ldl is also needed for
debuginfod support.
The functionality provided by libdw is needed for analyzing performance
of JITed code, which is mostly useful to developers and researchers.
Therefore, in order to avoid unpleasant surprises for people who don't
need this, simply disable libdw for static builds by default. It can
still be enabled explicitly if needed.
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230210005208.438142-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add the missing meson infrastructure bits for the new libdw
dependency. Model them after the existing capstone knobs.
Fixes: 7c10cb38cc ("accel/tcg: Add debuginfo support")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230210005208.438142-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Anthony Perard recently reported some problems with Clang v6.0 from
Ubuntu Bionic (with regards to the -Wmissing-braces configure test).
Since we're not officially supporting that version of Ubuntu anymore,
we should better bump our minimum version check in the configure script
instead of using our time to fix problems of unsupported compilers.
According to repology.org, our supported distros ship these versions
of Clang (looking at the highest version only):
Fedora 36: 14.0.5
CentOS 8 (RHEL-8): 12.0.1
Debian 11: 13.0.1
OpenSUSE Leap 15.4: 13.0.1
Ubuntu LTS 20.04: 12.0.0
FreeBSD Ports: 15.0.7
NetBSD pkgsrc: 15.0.7
Homebrew: 15.0.7
MSYS2 mingw: 15.0.7
Haiku ports: 12.0.1
While it seems like we could update to v12.0.0 from that point of view,
the default version on Ubuntu 20.04 is still v10.0, and we use that for
our CI tests based via the tests/docker/dockerfiles/ubuntu2004.docker
file.
Thus let's make v10.0 our minimum version now (which corresponds to
Apple Clang version v12.0). The -Wmissing-braces check can then be
removed, too, since both our minimum GCC and our minimum Clang version
now handle this correctly.
Message-Id: <20230131180239.1582302-1-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Hi
In this PULL request:
- Added to leonardo fixes:
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Please apply.
[take 2]
- rebase to latest upstream
- fix compilation of linux-user (if have_system was missing) (me)
- cleanup multifd_load_cleanup(leonardo)
- Document RAM flags (me)
Please apply.
[take 1]
This are all the reviewed patches for migration:
- AVX512 support for xbzrle (Ling Xu)
- /dev/userfaultd support (Peter Xu)
- Improve ordering of channels (Peter Xu)
- multifd cleanups (Li Zhang)
- Remove spurious files from last merge (me)
Rebase makes that to you
- Fix mixup between state_pending_{exact,estimate} (me)
- Cache RAM size during migration (me)
- cleanup several functions (me)
Please apply.
-----BEGIN PGP SIGNATURE-----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=TDnO
-----END PGP SIGNATURE-----
Merge tag 'migration-20230213-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request (take3)
Hi
In this PULL request:
- Added to leonardo fixes:
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Please apply.
[take 2]
- rebase to latest upstream
- fix compilation of linux-user (if have_system was missing) (me)
- cleanup multifd_load_cleanup(leonardo)
- Document RAM flags (me)
Please apply.
[take 1]
This are all the reviewed patches for migration:
- AVX512 support for xbzrle (Ling Xu)
- /dev/userfaultd support (Peter Xu)
- Improve ordering of channels (Peter Xu)
- multifd cleanups (Li Zhang)
- Remove spurious files from last merge (me)
Rebase makes that to you
- Fix mixup between state_pending_{exact,estimate} (me)
- Cache RAM size during migration (me)
- cleanup several functions (me)
Please apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmPppZYACgkQ9IfvGFhy
# 1yPLvQ//f8D6txzFawaxrfzpSAHnq70Gx+B5GkIwgwB8nlPIC3QELEf5uooM/RGA
# nSaUctUNOJUWqVGK3vp3jDIep02DzdIUrlOfy96h+pnTMpyMWFC2BexDfveVMUId
# dw8WCWZkGCFDfIWuKF+GA8eTu6HM1ouzgCJrRmPtCqsikzAPkogPm60hQSTAQxm9
# Kzdp1SXV1HmyA440vy8rtYf71BKpvb9OJFmwgZ+ICy0rc1aUmgJbKxkwyOgiI2lq
# ONekpbOg7lzlFVAQu1QHTmYN13bsn4uzwUgdifn1PixFQyRE3AVs4jdTmqeLnoPe
# Ac6j8v3pDOw/Xf4kpRWUmhkqTMEJt8/lyneJzu1mQkw0wwiUtDvknFgPG8wJsa+J
# ZQr1cBXQj4IjtkN6+ixF7XYvx3T6pWz0L+/w2+TbFBdLWIrPgFH0yPYjhx7FdDid
# cjUHyS1a0w9ngnXOxRG8+UNHWCpPOUhXeeiyNioogYZNKu77PFxJVDMe3eB6dXAB
# pDfl4P129PloKAPafcz9E6Sxr+lIgrETZmsRJlRz4czg18TxlIukMlDtyrepNWti
# GtIf9xTpP3JKjpHnKbWLaxP5VeFC7kQd0qas4VxD+tDjbJdUZdZMfHcOSS0SMRGe
# q5LVEzMMIPCQJQIqiLEJ0HTUUOtB8i+bGoirNEbDqhLa/oZwPP8=
# =TDnO
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 13 Feb 2023 02:51:02 GMT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20230213-pull-request' of https://gitlab.com/juan.quintela/qemu: (22 commits)
ram: Document migration ram flags
migration/multifd: Move load_cleanup inside incoming_state_destroy
migration/multifd: Join all multifd threads in order to avoid leaks
migration/multifd: Remove unnecessary assignment on multifd_load_cleanup()
migration/multifd: Change multifd_load_cleanup() signature and usage
migration: Postpone postcopy preempt channel to be after main
migration: Add a semaphore to count PONGs
migration: Cleanup postcopy_preempt_setup()
migration: Rework multi-channel checks on URI
Update bench-code for addressing CI problem
AVX512 support for xbzrle_encode_buffer
migration: I messed state_pending_exact/estimate
migration: Make ram_save_target_page() a pointer
migration: Calculate ram size once
migration: Split ram_bytes_total_common() in two functions
migration: Make find_dirty_block() return a single parameter
migration: Simplify ram_find_and_save_block()
util/userfaultfd: Support /dev/userfaultfd
linux-headers: Update to v6.1
multifd: Remove some redundant code
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
0x80 is RAM_SAVE_FLAG_HOOK, it is in qemu-file now.
Bigger usable flag is 0x200, noticing that.
We can reuse RAM_SAVe_FLAG_FULL.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Currently running migration_incoming_state_destroy() without first running
multifd_load_cleanup() will cause a yank error:
qemu-system-x86_64: ../util/yank.c:107: yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.
(core dumped)
The above error happens in the target host, when multifd is being used
for precopy, and then postcopy is triggered and the migration finishes.
This will crash the VM in the target host.
To avoid that, move multifd_load_cleanup() inside
migration_incoming_state_destroy(), so that the load cleanup becomes part
of the incoming state destroying process.
Running multifd_load_cleanup() twice can become an issue, though, but the
only scenario it could be ran twice is on process_incoming_migration_bh().
So removing this extra call is necessary.
On the other hand, this multifd_load_cleanup() call happens way before the
migration_incoming_state_destroy() and having this happening before
dirty_bitmap_mig_before_vm_start() and vm_start() may be a need.
So introduce a new function multifd_load_shutdown() that will mainly stop
all multifd threads and close their QIOChannels. Then use this function
instead of multifd_load_cleanup() to make sure nothing else is received
before dirty_bitmap_mig_before_vm_start().
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Current approach will only join threads that are still running.
For the threads not joined, resources or private memory are always kept in
the process space and never reclaimed before process end, and this risks
serious memory leaks.
This should usually not represent a big problem, since multifd migration
is usually just ran at most a few times, and after it succeeds there is
not much to be done before exiting the process.
Yet still, it should not hurt performance to join all of them.
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Before assigning "p->quit = true" for every multifd channel,
multifd_load_cleanup() will call multifd_recv_terminate_threads() which
already does the same assignment, while protected by a mutex.
So there is no point doing the same assignment again.
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Since it's introduction in commit f986c3d256 ("migration: Create multifd
migration threads"), multifd_load_cleanup() never returned any value
different than 0, neither set up any error on errp.
Even though, on process_incoming_migration_bh() an if clause uses it's
return value to decide on setting autostart = false, which will never
happen.
In order to simplify the codebase, change multifd_load_cleanup() signature
to 'void multifd_load_cleanup(void)', and for every usage remove error
handling or decision made based on return value != 0.
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy with preempt-mode enabled needs two channels to communicate. The
order of channel establishment is not guaranteed. It can happen that the
dest QEMU got the preempt channel connection request before the main
channel is established, then the migration may make no progress even during
precopy due to the wrong order.
To fix it, create the preempt channel only if we know the main channel is
established.
For a general postcopy migration, we delay it until postcopy_start(),
that's where we already went through some part of precopy on the main
channel. To make sure dest QEMU has already established the channel, we
wait until we got the first PONG received. That's something we do at the
start of precopy when postcopy enabled so it's guaranteed to happen sooner
or later.
For a postcopy recovery, we delay it to qemu_savevm_state_resume_prepare()
where we'll have round trips of data on bitmap synchronizations, which
means the main channel must have been established.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is mostly useless, but useful for us to know whether the main channel
is correctly established without changing the migration protocol.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Since we just dropped the only case where postcopy_preempt_setup() can
return an error, it doesn't need a retval anymore because it never fails.
Move the preempt check to the caller, preparing it to be used elsewhere to
do nothing but as simple as kicking the async connection.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The whole idea of multi-channel checks was not properly done, IMHO.
Currently we check multi-channel in a lot of places, but actually that's
not needed because we only need to check it right after we get the URI and
that should be it.
If the URI check succeeded, we should never need to check it again because
we must have it. If it check fails, we should fail immediately on either
the qmp_migrate or qmp_migrate_incoming, instead of failingg it later after
the connection established.
Neither should we fail any set capabiliities like what we used to do here:
5ad15e8614 ("migration: allow enabling mutilfd for specific protocol only", 2021-10-19)
Because logically the URI will only be set later after the capability is
set, so it doesn't make a lot of sense to check the URI type when setting
the capability, because we're checking the cap with an old URI passed in,
and that may not even be the URI we're going to use later.
This patch mostly reverted all such checks for before, dropping the
variable migrate_allow_multi_channels and helpers. Instead, add a common
helper to check URI for multi-channels for either qmp_migrate and
qmp_migrate_incoming and that should do all the proper checks. The failure
will only trigger with the "migrate" or "migrate_incoming" command, or when
user specified "-incoming xxx" where "xxx" is not "defer".
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Unit test code is in test-xbzrle.c, and benchmark code is in xbzrle-bench.c
for performance benchmarking. we have modified xbzrle-bench.c to address
CI problem.
Signed-off-by: ling xu <ling1.xu@intel.com>
Co-authored-by: Zhou Zhao <zhou.zhao@intel.com>
Co-authored-by: Jun Jin <jun.i.jin@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This commit is the same with [PATCH v6 1/2], and provides avx512 support for xbzrle_encode_buffer
function to accelerate xbzrle encoding speed. Runtime check of avx512
support and benchmark for this feature are added. Compared with C
version of xbzrle_encode_buffer function, avx512 version can achieve
50%-70% performance improvement on benchmarking. In addition, if dirty
data is randomly located in 4K page, the avx512 version can achieve
almost 140% performance gain.
Signed-off-by: ling xu <ling1.xu@intel.com>
Co-authored-by: Zhou Zhao <zhou.zhao@intel.com>
Co-authored-by: Jun Jin <jun.i.jin@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
I called the helper function from the wrong top level function.
This code was introduced in:
commit c8df4a7aef
Author: Juan Quintela <quintela@redhat.com>
Date: Mon Oct 3 02:00:03 2022 +0200
migration: Split save_live_pending() into state_pending_*
We split the function into to:
- state_pending_estimate: We estimate the remaining state size without
stopping the machine.
- state pending_exact: We calculate the exact amount of remaining
state.
Thanks to Avihai Horon <avihaih@nvidia.com> for finding it.
Fixes:c8df4a7aeffcb46020f610526eea621fa5b0cd47
When we introduced that patch, we enden calling
state_pending_estimate() helper from qemu_savevm_statepending_exact()
and
state_pending_exact() helper from qemu_savevm_statepending_estimate()
This patch fixes it.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We are going to create a new function for multifd latest in the series.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We are recalculating ram size continously, when we know that it don't
change during migration. Create a field in RAMState to track it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
It is just a big if in the middle of the function, and we need two
functions anways.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
Reindent to make Phillipe happy (and CODING_STYLE)
We used to return two bools, just return a single int with the
following meaning:
old return / again / new return
false false PAGE_ALL_CLEAN
false true PAGE_TRY_AGAIN
true true PAGE_DIRTY_FOUND /* We don't care about again at all */
Signed-off-by: Juan Quintela <quintela@redhat.com>
We will need later that find_dirty_block() return errors, so
simplify the loop.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Teach QEMU to use /dev/userfaultfd when it existed and fallback to the
system call if either it's not there or doesn't have enough permission.
Firstly, as long as the app has permission to access /dev/userfaultfd, it
always have the ability to trap kernel faults which QEMU mostly wants.
Meanwhile, in some context (e.g. containers) the userfaultfd syscall can be
forbidden, so it can be the major way to use postcopy in a restricted
environment with strict seccomp setup.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Cleanup multifd_channel_connect
Signed-off-by: Li Zhang <lizhang@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
I introduced spurious files on my tree during a rebase:
commit ebfc578715
Author: Zhenzhong Duan <zhenzhong.duan@intel.com>
Date: Mon Oct 17 15:53:51 2022 +0800
multifd: Fix flush of zero copy page send request
Make IO channel flush call after the inflight request has been drained
in multifd thread, or else we may missed to flush the inflight request.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
To make things worse, it appears like Zhenzhong is the one to blame.
for(int i=0; i < 1000000; i++) {
printf("I will not do rebases when I am tired\n");
}
Sorry, Juan.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This regression test demonstrates that detect-zeroes works with
registered buffers. Bug details:
https://gitlab.com/qemu-project/qemu/-/issues/1404
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230207203719.242926-5-stefanha@redhat.com>
The blk_register_buf() API is an optimization hint that allows some
block drivers to avoid I/O buffer housekeeping or bounce buffers.
Add an -r option to register the I/O buffer so that qemu-io can be used
to test the blk_register_buf() API. The next commit will add a test that
uses the new option.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230207203719.242926-4-stefanha@redhat.com>
The block layer APIs use BdrvRequestFlags while qemu-io code uses int.
Although the code compiles and runs fine, BdrvRequestFlags is clearer
because it differentiates between other types of flags like bdrv_open()
flags.
This is purely refactoring.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230207203719.242926-3-stefanha@redhat.com>
When a write request is converted into a write zeroes request by the
detect-zeroes= feature, it is no longer associated with an I/O buffer.
The BDRV_REQ_REGISTERED_BUF flag doesn't make sense without an I/O
buffer and must be cleared because bdrv_co_do_pwrite_zeroes() fails with
-EINVAL when it's set.
Fiona Ebner <f.ebner@proxmox.com> bisected and diagnosed this QEMU 7.2
regression where writes containing zeroes to a blockdev with
discard=unmap,detect-zeroes=unmap fail.
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1404
Fixes: e8b6535533 ("block: add BDRV_REQ_REGISTERED_BUF request flag")
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230207203719.242926-2-stefanha@redhat.com>
