so that it would be possible to increase maxcpus limit
for x86 target. Keep spapr/virt_arm at limit they used
to have 255.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently, the MMIO space for accessing PCI on pseries guests begins at
1 TiB in guest address space. Each PCI host bridge (PHB) has a 64 GiB
chunk of address space in which it places its outbound PIO and 32-bit and
64-bit MMIO windows.
This scheme as several problems:
- It limits guest RAM to 1 TiB (though we have a limited fix for this
now)
- It limits the total MMIO window to 64 GiB. This is not always enough
for some of the large nVidia GPGPU cards
- Putting all the windows into a single 64 GiB area means that naturally
aligning things within there will waste more address space.
In addition there was a miscalculation in some of the defaults, which meant
that the MMIO windows for each PHB actually slightly overran the 64 GiB
region for that PHB. We got away without nasty consequences because
the overrun fit within an unused area at the beginning of the next PHB's
region, but it's not pretty.
This patch implements a new scheme which addresses those problems, and is
also closer to what bare metal hardware and pHyp guests generally use.
Because some guest versions (including most current distro kernels) can't
access PCI MMIO above 64 TiB, we put all the PCI windows between 32 TiB and
64 TiB. This is broken into 1 TiB chunks. The first 1 TiB contains the
PIO (64 kiB) and 32-bit MMIO (2 GiB) windows for all of the PHBs. Each
subsequent TiB chunk contains a naturally aligned 64-bit MMIO window for
one PHB each.
This reduces the number of allowed PHBs (without full manual configuration
of all the windows) from 256 to 31, but this should still be plenty in
practice.
We also change some of the default window sizes for manually configured
PHBs to saner values.
Finally we adjust some tests and libqos so that it correctly uses the new
default locations. Ideally it would parse the device tree given to the
guest, but that's a more complex problem for another time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
On real hardware, and under pHyp, the PCI host bridges on Power machines
typically advertise two outbound MMIO windows from the guest's physical
memory space to PCI memory space:
- A 32-bit window which maps onto 2GiB..4GiB in the PCI address space
- A 64-bit window which maps onto a large region somewhere high in PCI
address space (traditionally this used an identity mapping from guest
physical address to PCI address, but that's not always the case)
The qemu implementation in spapr-pci-host-bridge, however, only supports a
single outbound MMIO window, however. At least some Linux versions expect
the two windows however, so we arranged this window to map onto the PCI
memory space from 2 GiB..~64 GiB, then advertised it as two contiguous
windows, the "32-bit" window from 2G..4G and the "64-bit" window from
4G..~64G.
This approach means, however, that the 64G window is not naturally aligned.
In turn this limits the size of the largest BAR we can map (which does have
to be naturally aligned) to roughly half of the total window. With some
large nVidia GPGPU cards which have huge memory BARs, this is starting to
be a problem.
This patch adds true support for separate 32-bit and 64-bit outbound MMIO
windows to the spapr-pci-host-bridge implementation, each of which can
be independently configured. The 32-bit window always maps to 2G.. in PCI
space, but the PCI address of the 64-bit window can be configured (it
defaults to the same as the guest physical address).
So as not to break possible existing configurations, as long as a 64-bit
window is not specified, a large single window can be specified. This
will appear the same way to the guest as the old approach, although it's
now implemented by two contiguous memory regions rather than a single one.
For now, this only adds the possibility of 64-bit windows. The default
configuration still uses the legacy mode.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Currently the default PCI host bridge for the 'pseries' machine type is
constructed with its IO windows in the 1TiB..(1TiB + 64GiB) range in
guest memory space. This means that if > 1TiB of guest RAM is specified,
the RAM will collide with the PCI IO windows, causing serious problems.
Problems won't be obvious until guest RAM goes a bit beyond 1TiB, because
there's a little unused space at the bottom of the area reserved for PCI,
but essentially this means that > 1TiB of RAM has never worked with the
pseries machine type.
This patch fixes this by altering the placement of PHBs on large-RAM VMs.
Instead of always placing the first PHB at 1TiB, it is placed at the next
1 TiB boundary after the maximum RAM address.
Technically, this changes behaviour in a migration-breaking way for
existing machines with > 1TiB maximum memory, but since having > 1 TiB
memory was broken anyway, this seems like a reasonable trade-off.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
The 'spapr-pci-host-bridge' represents the virtual PCI host bridge (PHB)
for a PAPR guest. Unlike on x86, it's routine on Power (both bare metal
and PAPR guests) to have numerous independent PHBs, each controlling a
separate PCI domain.
There are two ways of configuring the spapr-pci-host-bridge device: first
it can be done fully manually, specifying the locations and sizes of all
the IO windows. This gives the most control, but is very awkward with 6
mandatory parameters. Alternatively just an "index" can be specified
which essentially selects from an array of predefined PHB locations.
The PHB at index 0 is automatically created as the default PHB.
The current set of default locations causes some problems for guests with
large RAM (> 1 TiB) or PCI devices with very large BARs (e.g. big nVidia
GPGPU cards via VFIO). Obviously, for migration we can only change the
locations on a new machine type, however.
This is awkward, because the placement is currently decided within the
spapr-pci-host-bridge code, so it breaks abstraction to look inside the
machine type version.
So, this patch delegates the "default mode" PHB placement from the
spapr-pci-host-bridge device back to the machine type via a public method
in sPAPRMachineClass. It's still a bit ugly, but it's about the best we
can do.
For now, this just changes where the calculation is done. It doesn't
change the actual location of the host bridges, or any other behaviour.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Instead of an array of fixed sized blocks, use a list, as we will need
to have sources with variable number of interrupts. SPAPR only uses
a single entry. Native will create more. If performance becomes an
issue we can add some hashed lookup but for now this will do fine.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ move the initialization of list to xics_common_initfn,
restore xirr_owner after migration and move restoring to
icp_post_load]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[ clg: removed the icp_post_load() changes from nikunj patchset v3:
http://patchwork.ozlabs.org/patch/646008/ ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than machine instances having backward-compatible option
defaults that need to be repeatedly re-enabled for every new machine
type we introduce, we set the defaults appropriate for newer machine
types, then add code to explicitly disable instance options as needed
to maintain compatibility with older machine types.
Currently pseries-2.5 does not inherit from pseries-2.6 in this
fashion, which is okay at the moment since we do not have any
instance compatibility options for pseries-2.6+ currently.
We will make use of this in future patches though, so fix it here.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[dwg: Extended to make 2.7 inherit from 2.8 as well]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace repeated pattern
for (i = 0; i < nb_numa_nodes; i++) {
if (test_bit(idx, numa_info[i].node_cpu)) {
...
break;
with a helper function to lookup numa node index for cpu.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A couple of distributors are compiling their distributions
with "-mcpu=power8" for ppc64le these days, so the user sooner
or later runs into a crash there when not explicitely specifying
the "-cpu POWER8" option to QEMU (which is currently using POWER7
for the "pseries" machine by default). Due to this reason, the
linux-user target already switched to POWER8 a while ago (see commit
de3f1b9841). Since the softmmu target
of course has the same problem, we should switch there to POWER8 for
the newer machine types, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If the user passes an alias name and a property to -cpu, QEMU fails to
find the CPU definition and exits.
$ qemu-system-ppc64 -cpu POWER8E,compat=power7
qemu-system-ppc64: Unable to find sPAPR CPU Core definition
This happens because spapr_get_cpu_core_type() passes the full string from
the command line (i.e. "POWER8E,compat=power7") to ppc_cpu_lookup_alias(),
instead of the alias name piece only (i.e. "POWER8E").
The fix is to pass model_pieces[0] to ppc_cpu_lookup_alias().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
KVM-PR currently does not support transactional memory, and the
implementation in TCG is just a fake. We should not announce TM
support in the ibm,pa-features property when running on such a
system, so disable it by default and only enable it if the KVM
implementation supports it (i.e. recent versions of KVM-HV).
These changes are based on some earlier work from Anton Blanchard
(thanks!).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current code uses pa_features_206 for POWERPC_MMU_2_06, and
for everything else, it uses pa_features_207. This is bad in some
cases because there is also a "degraded" MMU version of ISA 2.06,
called POWERPC_MMU_2_06a, which should of course use the flags for
2.06 instead. And there is also the possibility that the user runs
the pseries machine with a POWER5+ or even 970 processor. In that
case we certainly do not want to set the flags for 2.07, and rather
simply skip the setting of the pa-features property instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The function spapr_populate_cpu_dt() has become quite big
already, and since we likely have to extend the pa-features
property for every new processor generation, it is nicer
if we put the related code into a separate function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that 2.7 is released, create the pseries-2.8 machine type and add the
boilerplate compatiblity macro stuff. There's nothing new to put into the
2.7 compatiliby properties yet, but we'll need something eventually, so
we might as well get it ready now.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Functions of type FindSysbusDeviceFunc currently return an integer.
However, this return value is always ignored by the caller in
find_sysbus_device().
This changes the function type to return void, to avoid confusion over
the function semantics.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
CPUState is a fairly common pointer to pass to these helpers. This means
if you need other arguments for the async_run_on_cpu case you end up
having to do a g_malloc to stuff additional data into the routine. For
the current users this isn't a massive deal but for MTTCG this gets
cumbersome when the only other parameter is often an address.
This adds the typedef run_on_cpu_func for helper functions which has an
explicit CPUState * passed as the first parameter. All the users of
run_on_cpu and async_run_on_cpu have had their helpers updated to use
CPUState where available.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[Sergey Fedorov:
- eliminate more CPUState in user data;
- remove unnecessary user data passing;
- fix target-s390x/kvm.c and target-s390x/misc_helper.c]
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> (s390 parts)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1470158864-17651-3-git-send-email-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new interface can be used to replace the old notify_started() and
notify_stopped(). Meanwhile it provides explicit flags so that IOMMUs
can know what kind of notifications it is requested for.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1474606948-14391-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This pull request supersedes ppc-for-2.8-20160922. There was a clang
build error in that, and I've also added one extra patch in the new pull.
Included in this set of ppc and spapr patches are:
* TCG implementations for more POWER9 instructions
* Some preliminary XICS fixes in preparataion for the pnv machine type
* A significant ADB (Macintosh kbd/mouse) cleanup
* Some conversions to use trace instead of debug macros
* Fixes to correctly handle global TLB flush synchronization in
TCG. This is already a bug, but it will have much more impact
when we get MTTCG
* Add more qtest testcases for Power
* Some MAINTAINERS updates
* Assorted bugfixes
* Add the basics of NUMA associativity to the spapr PCI host bridge
This touches some test files and monitor.c which are technically
outside the ppc code, but coming through this tree because the changes
are primarily of interest to ppc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=et1C
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20160923' into staging
ppc patch queue 2016-09-23
This pull request supersedes ppc-for-2.8-20160922. There was a clang
build error in that, and I've also added one extra patch in the new pull.
Included in this set of ppc and spapr patches are:
* TCG implementations for more POWER9 instructions
* Some preliminary XICS fixes in preparataion for the pnv machine type
* A significant ADB (Macintosh kbd/mouse) cleanup
* Some conversions to use trace instead of debug macros
* Fixes to correctly handle global TLB flush synchronization in
TCG. This is already a bug, but it will have much more impact
when we get MTTCG
* Add more qtest testcases for Power
* Some MAINTAINERS updates
* Assorted bugfixes
* Add the basics of NUMA associativity to the spapr PCI host bridge
This touches some test files and monitor.c which are technically
outside the ppc code, but coming through this tree because the changes
are primarily of interest to ppc.
# gpg: Signature made Fri 23 Sep 2016 08:14:47 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20160923: (45 commits)
spapr_pci: Add numa node id
monitor: fix crash for platforms without a CPU 0
linux-user: ppc64: fix ARCH_206 bit in AT_HWCAP
ppc/kvm: Mark 64kB page size support as disabled if not available
ppc/xics: An ICS with offset 0 is assumed to be uninitialized
ppc/xics: account correct irq status
Enable H_CLEAR_MOD and H_CLEAR_REF hypercalls on KVM/PPC64.
target-ppc: tlbie/tlbivax should have global effect
target-ppc: add flag in check_tlb_flush()
target-ppc: add TLB_NEED_LOCAL_FLUSH flag
spapr: Introduce sPAPRCPUCoreClass
target-ppc: implement darn instruction
target-ppc: add stxsi[bh]x instruction
target-ppc: add lxsi[bw]zx instruction
target-ppc: add xxspltib instruction
target-ppc: consolidate store conditional
target-ppc: move out stqcx impementation
target-ppc: consolidate load with reservation
target-ppc: convert st[16,32,64]r to use new macro
target-ppc: convert st64 to use new macro
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update all qemu_uuid users as well, especially get rid of the duplicated
low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API.
Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to
QemuUUID is done here too to keep everything in sync and avoid code
churn.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
This adds a numa id property to a PHB to allow linking passed PCI device
to CPU/memory. It is up to the management stack to do CPU/memory pinning
to the node with the actual PCI device.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[dwg: Renamed property from "node" to "numa_node" to match the similar
one in the pxb device]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These are mandatory per PAPR and available on Linux 4.3 and newer kernels. The calls in question are required to run FreeBSD guests with reasonable performance, so enable them if possible.
Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org>
[dwg: Added a stub to fix compile without KVM (e.g. on x86 host)]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
tlbie (BookS) and tlbivax (BookE) plus the H_CALLs(pseries) should have
a global effect.
Introduces TLB_NEED_GLOBAL_FLUSH flag. During lazy tlb flush, after
taking care of pending local flushes, check broadcast flush(at context
synchronizing event ptesync/tlbsync, etc) is needed. Depending on the
bitmask state of the tlb_need_flush, tlb is flushed from other cpus if
needed and the flags are cleared.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Use 'true' instead of '1' for call to check_tlb_flush()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We flush the qemu TLB lazily. check_tlb_flush is called whenever we hit
a context synchronizing event or instruction that requires a pending
flush to be performed.
However, we fail to handle broadcast TLB flush operations. In order to
fix that efficiently, we want to differentiate whether check_tlb_flush()
needs to only apply pending local flushes (isync instructions,
interrupts, ...) or also global pending flush operations. The latter is
only needed when executing instructions that are defined architecturally
as synchronizing global TLB flush operations. This in our case is
ptesync on BookS and tlbsync on BookE along with the paravirtualized
hypervisor calls.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[dwg: Changed gen_check_tlb_flush() to also take a bool, and fixed
some spelling errors in commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Each spapr cpu core type defines an instance_init routine which just
populates the CPU class name. This can be done in the class_init
commonly for all core types which simplifies the registration.
This is inspired by how PowerNV core types are registered.
Certain types of spapr cpu cores ('host' and generic type based on host
CPU) are initialized in target-ppc/kvm.c. To convert these type
registrations to use class_init, we need to expose
spapr_cpu_core_class_init() outside of spapr_cpu_core.c.
Commit d11b268e17 added a generic sPAPR CPU core family
type to support cases like POWER8 CPU type on POWER8E host CPU.
Switching to class_init would fix such scenarios to use the right
CPU thread type instead of defaulting to host-powerpc64-cpu.
In an unrelated cleanup, fix a typo in .get_hotplug_handler routine.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a first test to validate the protocol:
- rtas/get-time-of-day compares the time
from the guest with the time from the host.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Unused function declarations were found using a simple gcc plugin and
manually verified by grepping the sources.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The exact same routine will be used in PowerNV.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_pci would also be a good candidate but the macro _FDT is
slightly different. It returns and does not exit.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Just a single patch here, I hope this is the last ppc / spapr fix to
squeeze into qemu-2.7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Jm4E
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160815' into staging
ppc patch queue for 2016-08-15
Just a single patch here, I hope this is the last ppc / spapr fix to
squeeze into qemu-2.7.
# gpg: Signature made Mon 15 Aug 2016 07:46:36 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160815:
ppc: parse cpu features once
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Considering that features are converted to global properties and
global properties are automatically applied to every new instance
of created CPU (at object_new() time), there is no point in
parsing cpu_model string every time a CPU created. So move
parsing outside CPU creation loop and do it only once.
Parsing also should be done before any CPU is created so that
features would affect the first CPU a well.
This patch does that for all PowerPC machine types.
It is based on previous work from Bharata:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg07564.html
Signed-off-by: Greg Kurz <groug@kaod.org>
[clg: only kept the fix for the spapr platform. support for other
platform will be added in 2.8 ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Hard-coding the CPU alias names in the spapr_cores[] array has
two big disadvantages:
1) We register a real type with the CPU alias name in
spapr_cpu_core_register_types() - this prevents us from registering
a CPU family name in kvm_ppc_register_host_cpu_type() with the same
name (as we do it for the non-hotpluggable CPU types).
2) It's quite cumbersome to maintain the aliases here in sync with the
ppc_cpu_aliases list from target-ppc/cpu-models.c.
So let's simply add proper alias lookup to the spapr cpu core code,
too (by checking whether the given model can be used directly, and
if not by trying to look up the given model as an alias name instead).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sPAPR CPU core typename is already available in the upper
block. Let's use it and move the check upward also.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 9af9e0f, 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but
they keep coming back. checkpatch.pl tries to flag them since commit
5d596c2, but it's not very good at it. Offenders tracked down with
Coccinelle script scripts/coccinelle/err-bad-newline.cocci, an updated
version of the script from commit 312fd5f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1470224274-31522-2-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When a TCE table (sPAPR IOMMU context) is in disabled state (which is true
by default for the 64-bit window), it has tcet->nb_table == 0 and
tcet->table == NULL. However, on system reset, spapr_tce_reset() executes,
which unconditionally calls
memset(tcet->table, 0, table_size);
We get away with this in practice, because it's a zero length memset(),
but memset() on a NULL pointer is undefined behaviour, so we should not
call it in this case.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Prior to c8721d3 "spapr: Error out when CPU hotplug is attempted on older
pseries machines", attempting to use query-hotpluggable-cpus on pseries-2.6
and earlier machine types would SEGV.
That change fixed that, but due to some unexpected interactions in init
order and a brown-paper-bag worthy failure to test, it accidentally
disabled query-hotpluggable-cpus for all pseries machine types, including
the current one which should allow it.
In fact, query_hotpluggable_cpus needs to be non-NULL when and only when
the dr_cpu_enabled flag in sPAPRMachineClass is set, which makes
dr_cpu_enabled itself redundant.
This patch removes dr_cpu_enabled, instead directly setting
query_hotpluggable_cpus from the machine class_init functions, and using
that to determine the availability of CPU hotplug when necessary.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
CPU hotplug and coldplug aren't supported prior to pseries-2.7. Further,
earlier machine types don't use CPU core objects at all. These mean that
query-hotpluggable-cpus and coldplug on older pseries machines will crash
QEMU. It also means that hotpluggable_cpus flag in query-machines will
be incorrectly set to true for pseries < 2.7, since it is based on the
presence of the query_hotpluggable_cpus hook.
- Don't assign the query_hotpluggable_cpus hook for pseries < 2.7
- query_hotpluggable_cpus should therefore never be called on pseries <
2.7, so add an assert
- spapr_core_pre_plug() should fail hot/cold plug attempts for pseries <
2.7, since core objects are never used there
- spapr_core_plug() should therefore never be called for pseries < 2.7, so
add an assert.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[dwg: Change from query_hotpluggable_cpus returning NULL for pseries < 2.7
to not being called at all, reword commit message for accuracy]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Boot CPU is assumed to be always present in QEMU code. So
until that assumptions are gone, deny removal request.
In another words, QEMU won't support boot CPU core hot-unplug.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[dwg: Tweaked error message for clarity]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This reverts commit 5cbc64de25.
Now that we have stable cpu_index values for pseries-2.7 (and future)
machine types, we can now safely allow hotplug and unplug in any order.
Conflicts:
hw/ppc/spapr_cpu_core.c
Some conflicts on revert due to some small changes in the inserted
code since the original commit.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It will enshure that cpu_index for a given cpu stays the same
regardless of the order cpus has been created/deleted and so
it would be possible to migrate QEMU instance with out of order
created CPU.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The goal of this patch is to have a stable core-id which does not depend
on any DT related semantics, which involve non-obvious computations on
modern PowerPC server cpus.
With this patch, the DT core id is computed on-demand as:
(core-id / smp_threads) * smt
where smt is the number of threads per core in the host.
This formula should be consolidated in a helper since it is needed in
several places.
Other uses for core-id includes: compute a stable cpu_index (which
allows random order hotplug/unplug without breaking migration) and
NUMA.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When canceling a migration process, we currently do not close the
HTAB migration file descriptor since htab_save_complete() is never
called in that case. So we leave the migration process with a
dangling htab_fd value around, and this causes any further migration
attempts to fail. To fix this issue, simply make sure that the
htab_fd is closed during the migration cleanup stage. And since the
cleanup() function is also called when migration succeeds, we can
also remove the call to close_htab_fd() from the htab_save_complete()
function.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1354341
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If CPU core addition or removal is allowed in random order leading to
holes in the core id range (and hence in the cpu_index range), migration
can fail as migration with holes in cpu_index range isn't yet handled
correctly.
Prevent this situation by enforcing the addition in contiguous order
and removal in LIFO order so that we never end up with holes in
cpu_index range.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If the host has 8 threads/core and the guest is started with:
-smp cores=1,threads=4,maxcpus=12
It is possible to crash QEMU by doing:
(qemu) device_add host-spapr-cpu-core,core-id=16,id=foo
(qemu) device_del foo
Segmentation fault
This happens because spapr_core_unplug() assumes cpu_dt_id == core_id.
As long as cpu_dt_id is derived from the non-table cpu_index, this is
only true when you plug cores with contiguous ids.
It is safer to be consistent: the DR connector was created with an
index that is immediately written to cc->core_id, and spapr_core_plug()
also relies on cc->core_id.
Let's use it also in spapr_core_unplug().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Header guard symbols should match their file name to make guard
collisions less likely. Offenders found with
scripts/clean-header-guards.pl -vn.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Rather than making the dealloc visitor track of stack of pointers
remembered during visit_start_* in order to free them during
visit_end_*, it's a lot easier to just make all callers pass the
same pointer to visit_end_*. The generated code has access to the
same pointer, while all other users are doing virtual walks and
can pass NULL. The dealloc visitor is then greatly simplified.
All three visit_end_*() functions intentionally take a void**,
even though the visit_start_*() functions differ between void**,
GenericList**, and GenericAlternate**. This is done for several
reasons: when doing a virtual walk, passing NULL doesn't care
what the type is, but when doing a generated walk, we already
have to cast the caller's specific FOO* to call visit_start,
while using void** lets us use visit_end without a cast. Also,
an upcoming patch will add a clone visitor that wants to use
the same implementation for all three visit_end callbacks,
which is made easier if all three share the same signature.
For visitors with already track per-object state (the QMP visitors
via a stack, and the string visitors which do not allow nesting),
add an assertion that the caller is indeed passing the same
pointer to paired calls.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-4-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
iommus can not be added with -device.
cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXe4l4AAoJECgfDbjSjVRpIz4IALye7mKG61/POA4Gqmhalc3d
HnlNSZ2YcKAuvPg7WWkBuRacrQvVY/MbW1mLloG1lY0tdFgZG8Cy+CY6wJg1NE4c
cXd+77vHkIyrnl+Nil+QOgTFiAsMnD+mXHHsnCDw2jGn3JbgVNuCMi7V34fGkQd2
PDkZyYfwTqO3HytuG0/j2Somc9du1gjYdn+9qigfZVgP96jGDojBuJWuuU5flCB3
Kj5xrOuI01XlbdTk71tVjBJBektQurWr6r7GECDqZIpUfc+BI70FU9jPh+OlLTO/
92yi29ncjyStz4tRnf18xoQ8uBgH/tD1xigEUPRtnm1+0i/tgONBL8cAdBF9FBE=
=ABGE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: new features, cleanups, fixes
iommus can not be added with -device.
cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 05 Jul 2016 11:18:32 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (30 commits)
vmw_pvscsi: remove unnecessary internal msi state flag
e1000e: remove unnecessary internal msi state flag
vmxnet3: remove unnecessary internal msi state flag
mptsas: remove unnecessary internal msi state flag
megasas: remove unnecessary megasas_use_msi()
pci: Convert msi_init() to Error and fix callers to check it
pci bridge dev: change msi property type
megasas: change msi/msix property type
mptsas: change msi property type
intel-hda: change msi property type
usb xhci: change msi/msix property type
change pvscsi_init_msi() type to void
tests: add APIC.cphp and DSDT.cphp blobs
tests: acpi: add CPU hotplug testcase
log: Permit -dfilter 0..0xffffffffffffffff
range: Replace internal representation of Range
range: Eliminate direct Range member access
log: Clean up misuse of Range for -dfilter
pci_register_bar: cleanup
Revert "virtio-net: unbreak self announcement and guest offloads after migration"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds proper support for translating real mode addresses based
on the combination of HV and LPCR bits. This handles HRMOR offset
for hypervisor real mode, and both RMA and VRMA modes for guest
real mode. PAPR mode adjusts the offsets appropriately to match the
RMA used in TCG, but we need to limit to the max supported by the
implementation (16G).
This includes some fixes by Cédric Le Goater <clg@kaod.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[dwg: Adjusted for differences in my version of the prereq patches]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The segment page shift parameter is never used. Let's remove it.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds support for Dynamic DMA Windows (DDW) option defined by
the SPAPR specification which allows to have additional DMA window(s)
The "ddw" property is enabled by default on a PHB but for compatibility
the pseries-2.6 machine and older disable it.
This also creates a single DMA window for the older machines to
maintain backward migration.
This implements DDW for PHB with emulated and VFIO devices. The host
kernel support is required. The advertised IOMMU page sizes are 4K and
64K; 16M pages are supported but not advertised by default, in order to
enable them, the user has to specify "pgsz" property for PHB and
enable huge pages for RAM.
The existing linux guests try creating one additional huge DMA window
with 64K or 16MB pages and map the entire guest RAM to. If succeeded,
the guest switches to dma_direct_ops and never calls TCE hypercalls
(H_PUT_TCE,...) again. This enables VFIO devices to use the entire RAM
and not waste time on map/unmap later. This adds a "dma64_win_addr"
property which is a bus address for the 64bit window and by default
set to 0x800.0000.0000.0000 as this is what the modern POWER8 hardware
uses and this allows having emulated and VFIO devices on the same bus.
This adds 4 RTAS handlers:
* ibm,query-pe-dma-window
* ibm,create-pe-dma-window
* ibm,remove-pe-dma-window
* ibm,reset-pe-dma-window
These are registered from type_init() callback.
These RTAS handlers are implemented in a separate file to avoid polluting
spapr_iommu.c with PCI.
This changes sPAPRPHBState::dma_liobn to an array to allow 2 LIOBNs
and updates all references to dma_liobn. However this does not add
64bit LIOBN to the migration stream as in fact even 32bit LIOBN is
rather pointless there (as it is a PHB property and the management
software can/should pass LIOBNs via CLI) but we keep it for the backward
migration support.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sPAPR TCE tables manage 2 copies when VFIO is using an IOMMU -
a guest view of the table and a hardware TCE table. If there is no VFIO
presense in the address space, then just the guest view is used, if
this is the case, it is allocated in the KVM. However since there is no
support yet for VFIO in KVM TCE hypercalls, when we start using VFIO,
we need to move the guest view from KVM to the userspace; and we need
to do this for every IOMMU on a bus with VFIO devices.
This implements the callbacks for the sPAPR IOMMU - notify_started()
reallocated the guest view to the user space, notify_stopped() does
the opposite.
This removes explicit spapr_tce_set_need_vfio() call from PCI hotplug
path as the new callbacks do this better - they notify IOMMU at
the exact moment when the configuration is changed, and this also
includes the case of PCI hot unplug.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
During CPU core realization, we create all the thread objects and parent
them to the core object in a loop. However, the realization of thread
objects is done separately by walking the threads of a core using
object_child_foreach(). With this, there is no guarantee on the order
in which the child thread objects get realized. Since CPU device tree
properties are currently derived from the CPU thread object, we assume
thread0 of the core to be the representative thread of the core when
creating device tree properties for the core. If thread0 is not the
first thread that gets realized, then we would end up having an
incorrect dt_id for the core and this causes hotplug failures from
the guest.
Fix this by realizing each thread object by walking the core's thread
object list thereby ensuring that thread0 and other threads are always
realized in the correct order.
Future TODO: CPU DT nodes are per-core properties and we should
ideally base the creation of CPU DT nodes on core objects rather than
the thread objects.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mac99's PCI root bus is not part of a host bridge,
realize it manually.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch changes spapr_cpu_core_realize_child() to have a local error
pointer and use error_propagate() as it is supposed to be done.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When a core is being realized, we create a child object for each thread
of the core.
The child is first initialized with object_initialize() which sets its ref
count to 1, and then added to the core with object_property_add_child()
which bumps the ref count to 2.
When the core gets released, object_unparent() decreases the ref count to 1,
and we g_free() the object: we hence loose the reference on an unfinalized
object. This is likely to cause random crashes.
Let's drop the extra reference as soon as we don't need it, after the
thread is added to the core.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduction of core based CPU hotplug for PowerPC sPAPR didn't
add support for 970MP and POWER8NVL based core types. Add support for
the same.
While we are here, add support for explicit specification of POWER5+_v2.1
core type.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The "ICP" is a different object than the "XICS". For historical reasons,
we have a number of places where we name a variable "icp" while it contains
a XICSState pointer. There *is* an ICPState structure too so this makes
the code really confusing.
This is a mechanical replacement of all those instances to use the name
"xics" instead. There should be no functional change.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[spapr_cpu_init has been moved to spapr_cpu_core.c, change there]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The common class doesn't change, the KVM one is sPAPR specific. Rename
variables and functions to xics_spapr.
Retain the type name as "xics" to preserve migration for existing sPAPR
guests.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Eliminate redundant and incorrect booke206_page_size_to_tlb function
from ppce500_spin.c in preference to previously existing but newly
exported definition from e500.c
Defect analysis:
The booke206_page_size_to_tlb function in e500.c was updated in commit
2bd9543 "ppc: booke206: use MAV=2.0 TSIZE definition, fix 4G pages" to
reflect a change in the definition of MAS1_TSIZE_SHIFT from 8
(corresponding to a min TLB page size of 4kb) to a value of 7 (TLB
page size 2k). The booke206_page_size_to_tlb() function defined in
ppce500_spin.c was never updated to reflect the change in
MAS1_TSIZE_SHIFT.
In http://lists.nongnu.org/archive/html/qemu-ppc/2016-06/msg00533.html,
Scott Wood suggested this "root cause" explanation:
SW> The patch that changed MAS1_TSIZE_SHIFT from 8 to 7 was around the
SW> same time as the patch that added this code, which is probably why
SW> adjusting it got missed. Commit 2bd9543cd3 did update the
SW> equivalent code in ppce500_mpc8544ds.c, which now resides in
SW> hw/ppc/e500.c and has been changed to not assume a power-of-2
SW> size. The ppce500_spin version should be eliminated.
Signed-off-by: Aaron Larson <alarson@ddci.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduction of core based CPU hotplug for PowerPC sPAPR didn't
add support for 970 and POWER5+ based core types. Add support for
the same.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This fixes a potential QEMU crash introduced by commit 3b54254966.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add "hcall-sprg0" (for H_SET_SPRG0), "hcall-copy" (for H_PAGE_INIT)
and "hcall-debug" (for H_LOGICAL_CI_LOAD/STORE) to the property
"ibm,hypertas-functions" to indicate that we support these hypercalls.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current behaviour isn't completely right, as for the DEC, we
don't properly re-arm when wrapping around, but I will fix this
in a separate patch.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
struct CPUCore uses 'id' suffix in the property name. As docs for
query-hotpluggable-cpus state that the cpu core properties should be
passed back to device_add by management in case new members are added
and thus the names for the fields should be kept in sync.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
[dwg: Removed a duplicated word in comment]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ppce500_spin.c uses SPR_PIR to initialize the spin table, however on
Book E processors the correct SPR is SPR_BOOKE_PIR.
Signed-off-by: Aaron Larson <alarson@ddci.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Every IOMMU has some granularity which MemoryRegionIOMMUOps::translate
uses when translating, however this information is not available outside
the translate context for various checks.
This adds a get_min_page_size callback to MemoryRegionIOMMUOps and
a wrapper for it so IOMMU users (such as VFIO) can know the minimum
actual page size supported by an IOMMU.
As IOMMU MR represents a guest IOMMU, this uses TARGET_PAGE_SIZE
as fallback.
This removes vfio_container_granularity() and uses new helper in
memory_region_iommu_replay() when replaying IOMMU mappings on added
IOMMU memory region.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
[dwg: Removed an unnecessary calculation]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Support for 0 value for memeory coherence is optional and with ppc64
we can always enable memory coherence. Linux kernel did that during
the development of 4.7 kernel. But that resulted in failure in Qemu
in H_ENTER hcall due to below check. The mentioned change was reverted
in the kernel and kernel right now enable memory coherence only if
cache inhibited is not set. Nevertheless update qemu WIMG flag check
to cover the case where we enable memory coherence along with cache
inhibited flag.
In order to handle older and newer kernel version consider both Cache
inhibitted and (cache inhibitted | memory conference) as valid values
for wimg flags.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Version: GnuPG v1
iQEcBAABAgAGBQJXaFInAAoJEJykq7OBq3PI6VsH/0Sfgbdo1RksYuQwb/y92sCW
EN+lxUZ+OLfgrc8PYgNZwfSM3rsfYhznL0MAXOeEe7Ahabi07w7DhGR8WvwfAOlI
G96FRuvrIPfv5u6U6fwS4CvG3TIHVLxfHKCsTpPUmH8U5CNx/x/tpjNiWN1dj6t+
sXybSjYHfZfiZy2tI9MFIFWCdxnF/pl0QAPhbRqc8Y/RQTDrPKRjLpz+nitN/u96
5TS7KlELyQuP91YMmLceYSmIkHbxW703h+iE2n4hov0uZCP8Jil+2Jsd3ziQSRlL
j6LqexQ2ViBGdDSfiZGYES2VPlsHOCwb4G+IgWBStfZg1ppaXENvcDzPrgrB+L4=
=eUnF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 20 Jun 2016 21:29:27 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request: (42 commits)
trace: split out trace events for linux-user/ directory
trace: split out trace events for qom/ directory
trace: split out trace events for target-ppc/ directory
trace: split out trace events for target-s390x/ directory
trace: split out trace events for target-sparc/ directory
trace: split out trace events for net/ directory
trace: split out trace events for audio/ directory
trace: split out trace events for ui/ directory
trace: split out trace events for hw/alpha/ directory
trace: split out trace events for hw/arm/ directory
trace: split out trace events for hw/acpi/ directory
trace: split out trace events for hw/vfio/ directory
trace: split out trace events for hw/s390x/ directory
trace: split out trace events for hw/pci/ directory
trace: split out trace events for hw/ppc/ directory
trace: split out trace events for hw/9pfs/ directory
trace: split out trace events for hw/i386/ directory
trace: split out trace events for hw/isa/ directory
trace: split out trace events for hw/sd/ directory
trace: split out trace events for hw/sparc/ directory
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move all trace-events for files in the hw/ppc/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1466066426-16657-27-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.
Manual fixups:
* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
"remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
statements
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It returns a list of present/possible to hotplug CPU
objects with a list of properties to use with
device_add.
in spapr case returned list would looks like:
-> { "execute": "query-hotpluggable-cpus" }
<- {"return": [
{ "props": { "core": 8 }, "type": "POWER8-spapr-cpu-core",
"vcpus-count": 2 },
{ "props": { "core": 0 }, "type": "POWER8-spapr-cpu-core",
"vcpus-count": 2,
"qom-path": "/machine/unattached/device[0]"}
]}'
TODO:
add 'node' property for core <-> numa node mapping
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Remove the CPU core device by removing the underlying CPU thread devices.
Hot removal of CPU for sPAPR guests is achieved by sending the hot unplug
notification to the guest. Release the vCPU object after CPU hot unplug so
that vCPU fd can be parked and reused.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Set up device tree entries for the hotplugged CPU core and use the
exising RTAS event logging infrastructure to send CPU hotplug notification
to the guest.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduce sPAPRMachineClass.dr_cpu_enabled to indicate support for
CPU core hotplug. Initialize boot time CPUs as core deivces and prevent
topologies that result in partially filled cores. Both of these are done
only if CPU core hotplug is supported.
Note: An unrelated change in the call to xics_system_init() is done
in this patch as it makes sense to use the local variable smt introduced
in this patch instead of kvmppc_smt_threads() call here.
TODO: We derive sPAPR core type by looking at -cpu <model>. However
we don't take care of "compat=" feature yet for boot time as well
as hotplug CPUs.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Start consolidating CPU init related routines in spapr_cpu_core.c. As
part of this, move spapr_cpu_init() and its dependencies from spapr.c
to spapr_cpu_core.c
No functionality change in this patch.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[dwg: Rename TIMEBASE_FREQ to SPAPR_TIMEBASE_FREQ, since it's now in a
public(ish) header]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add sPAPR specific abastract CPU core device that is based on generic
CPU core device. Use this as base type to create sPAPR CPU specific core
devices.
TODO:
- Add core types for other remaining CPU types
- Handle CPU model alias correctly
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If a CPU is hot removed while hotplug of the same is still in progress,
the guest crashes. Prevent this by ensuring that detach is done only
after attach has completed.
The existing code already prevents such race for PCI hotplug. However
given that CPU is a logical DR unlike PCI and starts with ISOLATED
state, we need a logic that works for CPU too.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[Don't set awaiting_attach for PCI devices]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When running "make check", there is currently always an error message
saying "spapr-pci-vfio-host-bridge is deprecated". This happens because
the QOM tests are instantiating all possible devices, and the error
message is currently located in the instance_init() function of the
device. Since it is legal for the tests to instantiate a device without
using it, the error message should be silenced when we're running in
test mode.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Memory hotplug can fail for some combinations of RAM and maxmem when
DDW is enabled in the presence of devices like nec-usb-xhci. DDW depends
on maximum addressable memory returned by guest and this value is currently
being calculated wrongly by the guest kernel routine memory_hotplug_max().
While there is an attempt to fix the guest kernel, this patch works
around the problem within QEMU itself.
memory_hotplug_max() routine in the guest kernel arrives at max
addressable memory by multiplying lmb-size with the lmb-count obtained
from ibm,dynamic-memory property. There are two assumptions here:
- All LMBs are part of ibm,dynamic memory: This is not true for PowerKVM
where only hot-pluggable LMBs are present in this property.
- The memory area comprising of RAM and hotplug region is contiguous: This
needn't be true always for PowerKVM as there can be gap between
boot time RAM and hotplug region.
To work around this guest kernel bug, ensure that ibm,dynamic-memory
has information about all the LMBs (RMA, boot-time LMBs, future
hotpluggable LMBs, and dummy LMBs to cover the gap between RAM and
hotpluggable region).
RMA is represented separately by memory@0 node. Hence mark RMA LMBs
and also the LMBs for the gap b/n RAM and hotpluggable region as
reserved and as having no valid DRC so that these LMBs are not considered
by the guest.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make sure that guests can use the PowerISA 2.07 CPU sPAPR
compatibility mode when they request it and the target CPU
supports it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current pcr_mask values are ambiguous: Should these be the mask
that defines valid bits in the PCR register? Or should these rather
indicate which compatibility levels are possible? Anyway, POWER6 and
POWER7 should certainly not use the same values here. So let's
introduce an additional variable "pcr_supported" here which is
used to indicate the valid compatibility levels, and use pcr_mask
to signal the valid bits in the PCR register.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The h_client_architecture_support() function has become quite big
and nested already. So factor out the code that takes care of the
sPAPR compatibility PVRs (which will be modified by the following
patches).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This wrapper for machine_usb(current_machine) is not necessary,
replace all usages of usb_enabled() with machine_usb().
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1465419025-21519-3-git-send-email-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The coccinelle script:
scripts/coccinelle/overflow_muldiv64.cocci
gives us a list of potential overflows in muldiv64()
(the two first parameters are 64bit values).
This patch fixes one, as the fix seems obvious:
replace muldiv64(a, b, c) by muldiv64(b, a, c)
as "a" and "b" are 64bit values but a <= NANOSECONDS_PER_SECOND.
(10^9 -> 30bit value).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It's become redundant since it was added in commit 09aa9a5 "spapr-pci:
enable adding PHB via -device".
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
KVM now supports 512 memslots on PowerPC (earlier it was 32). Allow half
of it (256) to be used as hotpluggable memory slots.
Instead of hard coding the max value, use the KVM supplied value if KVM
is enabled. Otherwise resort to the default value of 32.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This will be later used by the "ibm,reset-pe-dma-window" RTAS handler
which resets the DMA configuration to the defaults.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
LoPAPR dictates that during system reset all DMA windows must be removed
and the default DMA32 window must be created so does the patch.
At the moment there is just one window supported so no change in
behaviour is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We are going to have multiple DMA windows at different offsets on
a PCI bus. For the sake of migration, we will have as many TCE table
objects pre-created as many windows supported.
So we need a way to map windows dynamically onto a PCI bus
when migration of a table is completed but at this stage a TCE table
object does not have access to a PHB to ask it to map a DMA window
backed by just migrated TCE table.
This adds a "root" memory region (UINT64_MAX long) to the TCE object.
This new region is mapped on a PCI bus with enabled overlapping as
there will be one root MR per TCE table, each of them mapped at 0.
The actual IOMMU memory region is a subregion of the root region and
a TCE table enables/disables this subregion and maps it at
the specific offset inside the root MR which is 1:1 mapping of
a PCI address space.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The source guest could have reallocated the default TCE table and
migrate bigger/smaller table. This adds reallocation in post_load()
if the default table size is different on source and destination.
This adds @bus_offset, @page_shift to the migration stream as
a subsection so when DDW is added, migration to older machines will
still be possible. As @bus_offset and @page_shift are not used yet,
this makes no change in behavior.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
