No host backend support yet, but the interfaces for rotli
are in place. Canonicalize immediate rotate to the left,
based on a survey of architectures, but provide both left
and right shift interfaces to the translators.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
migration_rate_limit will erroneously ratelimit a shutdown socket,
which causes the migration thread to hang in ram_save_host_page
if the socket is shutdown.
Fix this by explicitly testing if the socket has errors or was
shutdown in migration_rate_limit.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <e79085bbe2d46dfa007dd41820194d5e2d4fcd80.1590007004.git.lukasstraub2@web.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If the secondary has to failover during checkpointing, it still is
in the old state (i.e. different state than primary). Thus we can't
expose the primary state until after the checkpoint is sent.
This fixes sporadic connection reset of client connections during
failover.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <d4555dd5146a54518c4d9d4efd996b7c745c6687.1589193382.git.lukasstraub2@web.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If vmstate_loading is true, secondary_vm_do_failover will set failover
status to FAILOVER_STATUS_RELAUNCH and return success without initiating
failover. However, if there is an error during the vmstate_loading
section, failover isn't relaunched. Instead we then wait for
failover on colo_incoming_sem.
Fix this by relaunching failover even if there was an error. Also,
to make this work properly, set vmstate_loading to false when
returning during the vmstate_loading section.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <f60b0a8e2fadaaec792e04819dfc46951842d6ba.1589193382.git.lukasstraub2@web.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If we suceed in receiving ram state, but fail receiving the device
state, there will be a mismatch between the two.
Fix this by flushing the ram cache only after the vmstate has been
received.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <3289d007d494cb0e2f05b1cf4ae6a78d300fede3.1589193382.git.lukasstraub2@web.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
cpu_synchronize_all_pre_loadvm() marks all vcpus as dirty, so the
registers are loaded from CPUState before we continue running
the vm. However if we failover during checkpoint, CPUState is not
initialized and the registers are loaded with garbage. This causes
guest hangs and crashes.
Fix this by using cpu_synchronize_all_states(), which initializes
CPUState from the current cpu registers additionally to marking
the vcpus as dirty.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <9675031ce557b73ebd10e7bd20ebbf57f30b177c.1589193382.git.lukasstraub2@web.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If multiple packets miscompare in a short timeframe, the semaphore
value will be increased multiple times. This causes multiple
checkpoints even if one would be sufficient.
Fix this by using a event instead of a semaphore for triggering
checkpoints. Now, checkpoint requests will be ignored until the
checkpoint event is sent to colo-compare (which releases the
miscompared packets).
Benchmark results (iperf3):
Client-to-server tcp:
without patch: ~66 Mbit/s
with patch: ~61 Mbit/s
Server-to-client tcp:
without patch: ~702 Kbit/s
with patch: ~16 Mbit/s
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <fd601ba1beb524aada54ba66e87ebfc12cf4574b.1589193382.git.lukasstraub2@web.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
"migration/vmstate.h" only uses pointer to MemoryRegion, which
is already forward declared in "qemu/typedefs.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200530165512.15225-1-f4bug@amsat.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Path lookup in the kernel has special rules for looking up magic symlinks
under /proc. If a filesystem operation is instructed to follow symlinks
(e.g. via AT_SYMLINK_FOLLOW or lack of AT_SYMLINK_NOFOLLOW), and the final
component is such a proc symlink, then the target of the magic symlink is
used for the operation, even if the target itself is a symlink. I.e. path
lookup is always terminated after following a final magic symlink.
I was erronously assuming that in the above case the target symlink would
also be followed, and so workarounds were added for a couple of operations
to handle the symlink case. Since the symlink can be handled simply by
following the proc symlink, these workardouds are not needed.
Also remove the "norace" option, which disabled the workarounds.
Commit bdfd667883 ("virtiofsd: Fix xattr operations") already dealt with
the same issue for xattr operations.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Message-Id: <20200514140736.20561-1-mszeredi@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Simplify qom_set by making it use qmp_qom_set and the JSON parser.
(qemu) qom-get /machine smm
"auto"
(qemu) qom-set /machine smm "auto"
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200520151108.160598-3-dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With 's'->'S' type change suggested by Paolo and Markus
This started off as Andreas Färber's implementation from
March 2015, but after feedback from Paolo and Markus it morphed into
using the json output which handles structs reasonably.
Use with qom-list to find the members of an object.
(qemu) qom-get /backend/console[0]/device/vga.rom[0] size
65536
(qemu) qom-get /machine smm
"auto"
(qemu) qom-get /machine rtc-time
{
"tm_year": 120,
"tm_sec": 51,
"tm_hour": 9,
"tm_min": 50,
"tm_mon": 4,
"tm_mday": 20
}
(qemu) qom-get /machine frob
Error: Property '.frob' not found
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200520151108.160598-2-dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When error happen in initializing 'rdma_return_path', we should cleanup rdma context
before g_free(rdma) to avoid some memleaks. This patch fix that.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200508100755.7875-3-pannengyuan@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
'rdma' is NULL when taking the first error branch in rdma_start_incoming_migration.
And it will cause a null pointer access in label 'err'. Fix that.
Fixes: 59c59c67ee
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200508100755.7875-2-pannengyuan@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Note this is CID 1428762
this also removes tricore_cpu_get_phys_page_attrs_debug() as it was a
temporary fix from b190f477e2.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20200529072148.284037-5-kbastian@mail.uni-paderborn.de>
this is needed for remote gdb connections.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20200529072148.284037-4-kbastian@mail.uni-paderborn.de>
this allows us to remove the references to env from ctx. This also fixes
a segfault that was due to the unititalized ctx->env ptr.
Reported-by: Andreas Konopik <andreas.konopik@fau.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20200529072148.284037-3-kbastian@mail.uni-paderborn.de>
EXCP_DEBUG is the only user. If we encounter a jump in tricore-gdb it's
target was overwritten by generate_qemu_excp() and we would never leave.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20200529072148.284037-2-kbastian@mail.uni-paderborn.de>
Loongson processor prefers 16KB page size in system emulator, so let's
define mc->minimum_page_bits to 14.
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1586337380-25217-2-git-send-email-chenhc@lemote.com>
Traditionally, MIPS use 4KB page size, but Loongson prefer 16KB page
size in system emulator. So, let's define TARGET_PAGE_BITS_VARY and
TARGET_PAGE_BITS_MIN to support variable page size.
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1586337380-25217-1-git-send-email-chenhc@lemote.com>
Currently, KVM/MIPS only deliver I/O interrupt via IP2, this patch add
IP3 delivery as well, because Loongson-3 based machine use both IRQ2
(CPU's IP2) and IRQ3 (CPU's IP3).
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1588501221-1205-4-git-send-email-chenhc@lemote.com>
Preparing for Loongson-3 virtualization, add KVM target support for
MIPS64 in configure script.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1588501221-1205-2-git-send-email-chenhc@lemote.com>
The description of "make check" is out-of-date, so fix it by adding
block and softfloat.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1588674291-6486-1-git-send-email-chenhc@lemote.com>
This patch moves image downloading functions to the separate class to allow
reusing them from record/replay tests.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <159073593167.20809.17582679291556188984.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This patch splits code in BootLinuxConsole class into two different
classes to allow reusing it by record/replay tests.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <159073588490.20809.13942096070255577558.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Console interaction in avocado scripts was possible only with single
default VM.
This patch modifies the function parameters to allow passing a specific
VM as a parameter to interact with it.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <159073587933.20809.5122618715976660635.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When the source finishes migration the destination will still be
receiving the data sent by the source, so it might not have quite
finished yet, so won't quite have reached 'completed'.
This lead to occasional asserts in the next few checks.
After the source has finished, check the destination as well.
(We can't just switch to checking the destination, because it doesn't
give a status until it has started receiving the migration).
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200528112404.121972-1-dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200512103238.7078-7-philmd@redhat.com>
This allows for waiting for completion of arbitrary commands.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200529203458.1038-7-robert.foley@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Added a new special variable QEMU_LOCAL=1, which
will indicate to take the QEMU binary from the current
build.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200529203458.1038-6-robert.foley@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This helps debug issues that occur during the boot sequence.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200529203458.1038-5-robert.foley@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
It can be None; so add assertions or exceptions where appropriate to
guard the access accordingly.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514055403.18902-30-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In truth, if you don't do this, you'll just get a TypeError
exception. Now, you'll get an AssertionError.
Is this tangibly better? No.
Does mypy complain less? Yes.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514055403.18902-21-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The type system doesn't want integers.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514055403.18902-15-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
mypy considers it incorrect to use `bool` to statically return false,
because it will assume that it could conceivably return True, and gives
different analysis in that case. Use a None return to achieve the same
effect, but make mypy happy.
Note: Pylint considers function signatures as code that might trip the
duplicate-code checker. I'd rather not disable this as it does not
trigger often in practice, so I'm disabling it as a one-off and filed a
change request; see https://github.com/PyCQA/pylint/issues/3619
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514055403.18902-14-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Note:
A bug in typeshed (https://github.com/python/typeshed/issues/3977)
misinterprets the type of makefile(). Work around this by explicitly
stating that we are opening a text-mode file.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514055403.18902-13-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use the Python3 style instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514055403.18902-12-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Mostly, ignore the "no bare except" rule, because flake8 is not
contextual and cannot determine if we re-raise. Pylint can, though, so
always prefer pylint for that.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200528222129.23826-5-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Bring our these files up to speed with pylint 2.5.0.
Add a pylintrc file to formalize which pylint subset
we are targeting.
The similarity ignore is there to suppress similarity
reports across imports, which for typing constants,
are going to trigger this report erroneously.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200528222129.23826-4-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Python 3.5 and above do not print a warning when logging is not
configured. As a library, it's best practice to leave logging
configuration to the client executable.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514055403.18902-22-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add method to hard-kill vm, without any quit commands.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200217150246.29180-19-vsementsov@virtuozzo.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We guarantee 3.5+ everywhere; remove more dead checks. In general, try
to avoid using version checks and instead prefer to attempt behavior
when possible.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514035230.25756-1-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
There's more wrong with these scripts; They are in various stages of
disrepair. That's beyond the scope of this current patchset.
This just mechanically corrects the imports and the shebangs, as part of
ensuring that the python/qemu/lib refactoring didn't break anything
needlessly.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200528222129.23826-2-jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
