g_malloc0_n() is introduced since glib-2.24 while QEMU currently
requires glib-2.22. This may cause a link error on some distributions.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Although it is pretty unusual the stride for the guest image and the
mirror image maintained by spice-display can be different. So use
separate variables for them.
https://bugzilla.redhat.com/show_bug.cgi?id=1163047
Cc: qemu-stable@nongnu.org
Reported-by: perrier vincent <clownix@clownix.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Version: GnuPG v1
iQEbBAABAgAGBQJVeEPbAAoJEJykq7OBq3PIroMH+IPgOCb4VL5TLqviUqfKVor+
Z4QRqAgUurSjtYj5kqAmLkoelP4HBjPngvW2JVwbYICuOcq9Pd+koB309yKRHw+M
rW4TDhshonM/PUrf82cOXdkJUT+d+3FRYidZn3KXRbm+CEkyVOdNOPPefGD1ohVf
azeocOqkYVZlMcIvf+CMgZc8xN0+WIzDYPfDFUfzEWrdYHL02GqTbpy7KeD4mlEV
AGLy2W6ndYnhlvQI3Eums4+DLKqcFiZMZUMi/t+S2viYCCY0MQ3OtDQlWkB2wiDw
+y8VqV720nWeIuCvzXq/yb7UeLHaEUjPqkBGUOFcDg0EQXtUMv6WIRLALXSoCQ==
=6r65
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/CVE-2015-3209-pcnet-tx-buffer-fix-pull-request' into staging
# gpg: Signature made Wed Jun 10 15:04:11 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/CVE-2015-3209-pcnet-tx-buffer-fix-pull-request:
pcnet: force the buffer access to be in bounds during tx
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
4096 is the maximum length per TMD and it is also currently the size of
the relay buffer pcnet driver uses for sending the packet data to QEMU
for further processing. With packet spanning multiple TMDs it can
happen that the overall packet size will be bigger than sizeof(buffer),
which results in memory corruption.
Fix this by only allowing to queue maximum sizeof(buffer) bytes.
This is CVE-2015-3209.
[Fixed 3-space indentation to QEMU's 4-space coding standard.
--Stefan]
Signed-off-by: Petr Matousek <pmatouse@redhat.com>
Reported-by: Matt Tait <matttait@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds the core code for virtio gpu emulation,
covering 2d support.
Written by Dave Airlie and Gerd Hoffmann.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It has been reported that sometimes the .rodata section of SeaBIOS,
containing the constant string against which the SMBIOS signature
ends up being compared, also falls within the guest f-segment. In
that case, the test obviously fails, unless we continue searching
for the *real* SMBIOS entry point.
Rather than stopping at the first match for the SMBIOS signature
("_SM_") in the f-segment (0xF0000-0xFFFFF), continue scanning
until either a valid entry point table is found, or the f-segment
has been exhausted.
Reported-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Allow user supplied files to be inserted into the fw_cfg
device before starting the guest. Since fw_cfg_add_file()
already disallows duplicate fw_cfg file names, qemu will
exit with an error message if the user supplies multiple
blobs with the same fw_cfg file name, or if a blob name
collides with a fw_cfg name programmatically added from
within the QEMU source code. A warning message will be
printed if the fw_cfg item name does not begin with the
prefix "opt/", which is recommended for external, user
provided blobs.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Exit with an error (instead of simply logging a trace event)
whenever the same fw_cfg file name is added multiple times via
one of the fw_cfg_add_file[_callback]() host-side API calls.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Enforce a single assignment of data for each distinct selector key.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
From this point forward, any guest-side writes to the fw_cfg
data register will be treated as no-ops. This patch also removes
the unused host-side API function fw_cfg_add_callback(), which
allowed the registration of a callback to be executed each time
the guest completed a full overwrite of a given fw_cfg data item.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On ppc, sparc, and sparc64, the value of the FW_CFG_BOOT_DEVICE 16bit
fw_cfg entry is repeatedly modified from a series of callbacks, which
currently results in the previous value's dynamically allocated memory
being leaked.
This patch switches updating to the new fw_cfg_modify_i16() call, which
does not cause memory leaks.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Allow the ability to modify the value of an existing 16-bit integer
fw_cfg item.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Adding the fw_cfg cmd line support patch by
Gabriel L. Somlo hits the limit.
Fix this by making the array larger.
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The platform device class has become abstract. This patch introduces
a calxeda xgmac device that derives from it.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The tcg_constant_folding folding ends up doing all the optimizations
(which is a good thing to avoid looping on all ops multiple time), so
make it clear and just rename it tcg_optimize.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1433447607-31184-6-git-send-email-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Most of the calls to tcg_opt_gen_mov are preceeded by a test to check if
the source temp is a constant. Fold that into the tcg_opt_gen_mov
function.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1433495958-9508-1-git-send-email-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Each call to tcg_opt_gen_mov is preceeded by a test to check if the
source and destination temps are copies. Fold that into the
tcg_opt_gen_mov function.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1433447607-31184-4-git-send-email-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can get the opcode using the TCGOp pointer. It needs to be
dereferenced, but it's anyway done a few lines below to write
the new value.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1433447607-31184-3-git-send-email-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can get the opcode using the TCGOp pointer. It needs to be
dereferenced, but it's anyway done a few lines below to write
the new value.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1433447607-31184-2-git-send-email-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When the same temp is used twice or more as an input argument to a TCG
instruction, the dead computation code doesn't recognize the second use
as a dead temp. This is because the temp is marked as live in the same
loop where dead inputs are checked.
The fix is to split the loop in two parts. This avoid emitting a move
and using a register for the movcond instruction when used as "move if
true" on x86-64. This might bring more improvements on RISC TCG targets
which don't have outputs aliased to inputs.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1433447228-29425-3-git-send-email-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For TCG ops with two outputs registers (add2, sub2, div2, div2u), when
the same input temp is used for the two inputs aliased to the two
outputs, and when these inputs are both dead, the register allocation
code wrongly assigned the same register to the same output.
This happens for example with sub2 t1, t2, t3, t3, t4, t5, when t3 is
not used anymore after the TCG op. In that case the same register is
used for t1, t2 and t3.
The fix is to look for already allocated aliased input when allocating
a dead aliased input and check that the register is not already
used.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1433447228-29425-2-git-send-email-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The addition of MO_AMASK means that places that used inverted masks
need to be changed to use positive masks, and places that failed to
mask the intended bits need updating.
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Tested-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kn95
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-06-09' into staging
Error reporting patches
# gpg: Signature made Tue Jun 9 06:42:15 2015 BST using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-error-2015-06-09:
vhost-user: Improve -netdev/netdev_add/-net/... error reporting
QemuOpts: Convert qemu_opt_foreach() to Error
QemuOpts: Drop qemu_opt_foreach() parameter abort_on_failure
blkdebug: Simplify passing of Error through qemu_opts_foreach()
QemuOpts: Convert qemu_opts_foreach() to Error
QemuOpts: Drop qemu_opts_foreach() parameter abort_on_failure
vl: Fail right after first bad -object
vl: Print -device help at most once
vl: Report failure to sandbox at most once
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Ctrl-Alt-u keyboard shortcut restores the screen to its original
size. In the SDL2 UI this is done by destroying the window and
creating a new one. The old window emits SDL_WINDOWEVENT_HIDDEN when
it's destroyed, but trying to call SDL_GetWindowFromID() from that
event's window ID returns a null pointer. handle_windowevent() assumes
that the pointer is never null so it results in a crash.
Cc: qemu-stable@nongnu.org
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
commit 46c804def4 ("s390x: move fpu regs into a subsection
of the vmstate") moved the fprs into a subsection and bumped
the version number. This will allow to not transfer fprs in
the future if necessary. Add a comment to mark the return true
as intentional.
CC: Juan Quintela <quintela@redhat.com>
CC: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1433758884-2997-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
When -netdev vhost-user fails, it first reports a specific error, then
one or more generic ones, like this:
$ qemu-system-x86_64 -netdev vhost-user,id=foo,chardev=xxx
qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: chardev "xxx" not found
qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: No suitable chardev found
qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: Device 'vhost-user' could not be initialized
With the command line, the messages go to stderr. In HMP, they go to
the monitor. In QMP, the last one becomes the error reply, and the
others go to stderr.
Convert net_init_vhost_user() and its helpers to Error. This
suppresses the unwanted unspecific error messages, and makes the
specific error the QMP error reply.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When the argument is non-zero, qemu_opt_foreach() stops on callback
returning non-zero, and returns that value.
When the argument is zero, it doesn't stop, and returns the callback's
value from the last iteration.
The two callers that pass zero could just as well pass one:
* qemu_spice_init()'s callback add_channel() either returns zero or
exit()s.
* config_write_opts()'s callback config_write_opt() always returns
zero.
Drop the parameter, and always stop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
When the argument is non-zero, qemu_opts_foreach() stops on callback
returning non-zero, and returns that value.
When the argument is zero, it doesn't stop, and returns the bit-wise
inclusive or of all the return values. Funky :)
The callers that pass zero could just as well pass one, because their
callbacks can't return anything but zero:
* qemu_add_globals()'s callback qdev_add_one_global()
* qemu_config_write()'s callback config_write_opts()
* main()'s callbacks default_driver_check(), drive_enable_snapshot(),
vnc_init_func()
Drop the parameter, and always stop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Failure to create an object with -object is a fatal error. However,
we delay the actual exit until all -object are processed. On the one
hand, this permits detection of genuine additional errors. On the
other hand, it can muddy the waters with uninteresting additional
errors, e.g. when a later -object tries to reference a prior one that
failed.
We generally stop right on the first bad option, so do that for
-object as well.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We print it once for each -device help. Not helpful. Stop after the
first one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It's reported once per -sandbox on. Stop on the first failure, like
we do for other options.
Not fixed: "-sandbox on -sandbox off" should leave the sandbox off.
It doesn't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch adds the code requested to assign interrupts to
a guest. The interrupts are mediated through user handled
eventfds only.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>