The Xen HVM unplug protocol [1] specifies a mechanism to allow guests to
request unplug of 'aux' disks (which is stated to mean all IDE disks,
except the primary master). This patch adds support for that unplug request.
NOTE: The semantics of what happens if unplug of all disks and 'aux' disks
is simultaneously requests is not clear. The patch makes that
assumption that an 'all' request overrides an 'aux' request.
[1] http://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/misc/hvm-emulated-unplug.markdown
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
----
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: John Snow <jsnow@redhat.com>
...not just IDE and SCSI.
This patch allows the Xen tool-stack to fully support of NVMe as an
emulated disk type. See [1] for the relevant tool-stack patch discussion.
[1] https://lists.xen.org/archives/html/xen-devel/2017-01/msg01225.html
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The current code is poorly structured and potentially leads to multiple
config space reads when one is sufficient. Also the UNPLUG_ALL_IDE_DISKS
flag is mis-named since it also results in SCSI disks being unplugged.
This patch renames the flag and re-structures the code to be more
efficient, and readable.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
When setting dma channel 'data_type', if (value & 3) == 3,
the set 'data_type' is said to be bad. This also leads to an
OOB access in 'omap_dma_transfer_generic', while doing
cpu_physical_memory_r/w operations. Add check to avoid it.
Reported-by: Jiang Xin <jiangxin1@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20170127120528.30959-1-ppandit@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a broken expression in the calculation of ELRSR
register bits: instead of "(lr & ICH_LR_EL2_HW) == 1"
we want to check for != 0, because the HW bit is not
bit 0 so a test for == 1 is always false.
Fixes: https://bugs.launchpad.net/bugs/1658506
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1485255993-6322-1-git-send-email-peter.maydell@linaro.org
The frame_size local variable in exynos4210_uart_update_parameters()
is calculated but never used (and has been this way since the
device was introduced in commit e5a4914efc). The qemu_chr_fe_ioctl()
doesn't need this information (if it really wanted it it could
calculate it from the parity/data_bits/stop_bits), so just drop
the variable entirely.
Fixes: https://bugs.launchpad.net/bugs/1655702
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1484589515-26353-1-git-send-email-peter.maydell@linaro.org
When the guest attempts to start an MII register
access via the MCTL register, clear the START bit,
so that when the guest reads it back the register
transaction will be signalled as having completed.
This avoids the guest spinning as it polls the
START bit waiting for it to clear (which it
previously never would).
The MII registers themselves still aren't implemented,
but at least we can avoid guests spending quite so much
time busy waiting.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1484938222-1423-1-git-send-email-peter.maydell@linaro.org
[PMM: expand commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For M profile (unlike A profile) the reset value of R14 is specified
as 0xffffffff. (The rationale is that this is an illegal exception
return value, so if guest code tries to return to it it will result
in a helpful exception.)
Registers r0 to r12 and the flags are architecturally UNKNOWN on
reset, so we leave those at zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-11-git-send-email-peter.maydell@linaro.org
For M profile CPUs, FAULTMASK should be 0 on reset, like PRIMASK.
QEMU stores FAULTMASK in the PSTATE F bit, so (as with PRIMASK in the
I bit) we have to clear these to undo the A profile default of 1.
Update the comment accordingly and move it so that it's closer to the
code it's referring to.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-10-git-send-email-peter.maydell@linaro.org
[PMM: rewrote commit message, moved comments]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CCR.USERSETMPEND bit has to be set to permit unprivileged code to
write to the Software Triggered Interrupt register; honour this bit
rather than letting any code write to the register.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-9-git-send-email-peter.maydell@linaro.org
[PMM: Tweak commit message, comment, phrasing of condition]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For v7M attempts to access a nonexistent coprocessor are reported
differently from plain undefined instructions (as UsageFaults of type
NOCP rather than type UNDEFINSTR). Split them out into a new
EXCP_NOCP so we can report the FSR value correctly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-8-git-send-email-peter.maydell@linaro.org
When we take an exception for an undefined instruction, set the
appropriate CFSR bit.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-7-git-send-email-peter.maydell@linaro.org
[PMM: tweaked commit message, comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CCR.STACKALIGN bit controls whether the CPU is supposed to force
8-alignment of the stack pointer on entry to the exception handler.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Message-id: 1485285380-10565-6-git-send-email-peter.maydell@linaro.org
[PMM: commit message and comment tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the v7M system registers CCR, CFSR, HFSR, DFSR, BFAR and
MMFAR. For the moment these simply read as written (with some basic
handling of RAZ/WI bits and W1C semantics).
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-5-git-send-email-peter.maydell@linaro.org
[PMM: drop warning about setting unimplemented CCR bits;
tweak commit message; add DFSR]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the structure fields, VMState fields, reset code and macros for
the v7M system control registers CCR, CFSR, HFSR, DFSR, MMFAR and
BFAR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-4-git-send-email-peter.maydell@linaro.org
Many NVIC operations access the CPU state, so store a pointer in
struct nvic_state rather than fetching it via qemu_get_cpu() every
time we need it.
As with the arm_gicv3_common code, we currently just call
qemu_get_cpu() in the NVIC's realize method, but in future we might
want to use a QOM property to pass the CPU to the NVIC.
This imposes an ordering requirement that the CPU is
realized before the NVIC, but that is always true since
both are dealt with in armv7m_init().
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-3-git-send-email-peter.maydell@linaro.org
[PMM: Use qemu_get_cpu(0) rather than first_cpu; expand
commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We only use the IS_M() macro in two places, and it's a bit of a
namespace grab to put in cpu.h. Drop it in favour of just explicitly
calling arm_feature() in the places where it was used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-2-git-send-email-peter.maydell@linaro.org
For configurations of the pflash_cfi01 device which set it up with a
device-width not equal to the width (ie where we are emulating
multiple narrow flash devices wired up in parallel), we were giving
incorrect values in the CFI data table:
(1) the sector length entry should specify the sector length for a
single device, not the length for the overall collection of
devices
(2) the number of blocks per device must not be divided by the
number of devices because the resulting device size would not
match the overall size
(3) this then means that the overall write block size must be
modified depending on the number of devices because the entry is
per device and when the guest writes into the flash it
calculates the write size by using the CFI entry (write size
per device) multiplied by the number of chips.
(It would alternatively be possible to modify the write
block size in the CFI table (currently hardcoded at 2048) and
leave the overall write block size alone.)
This commit corrects these bugs, and adds a hw-compat property
to retain the old behaviour on 2.8 and earlier versions. (The
only board we have which uses this sort of flash config and
has machine versioning is the "virt" board -- the PC uses a
single flash device and so behaviour is unaffected whether
using old-multiple-chip-handling or not.)
Here is a configuration example from the vexpress board:
VEXPRESS_FLASH_SIZE = 64M
VEXPRESS_FLASH_SECT_SIZE 256K
num-blocks = VEXPRESS_FLASH_SIZE / VEXPRESS_FLASH_SECT_SIZE = 256
sector-length = 256K
width = 4
device-width = 2
The code will fill the CFI entry with the following entries:
num-blocks = 256
sector-length = 128K
writeblock_size = 2048
This results in two chips, each with 256 * 128K = 32M device size and
a write block size of 2048.
A sector erase will be sent to both chips, thus 256K must be erased.
When the guest sends a block write command, it will write 4096 bytes
data at once (2048 per device).
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: cleaned up and expanded commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
FAULTMASK must be cleared on return from all
exceptions other than NMI.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484937883-1068-7-git-send-email-peter.maydell@linaro.org
The v7m CONTROL register bit 1 is SPSEL, which indicates
the stack being used. We were storing this information
not in v7m.control but in the separate v7m.other_sp
structure field. Unfortunately, the code handling reads
of the CONTROL register didn't take account of this, and
so if SPSEL was updated by an exception entry or exit then
a subsequent guest read of CONTROL would get the wrong value.
Using a separate structure field doesn't really gain us
anything in efficiency, so drop this unnecessary complexity
in favour of simply storing all the bits in v7m.control.
This is a migration compatibility break for M profile
CPUs only.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484937883-1068-6-git-send-email-peter.maydell@linaro.org
[PMM: rewrote commit message;
use deposit32(); use FIELD to define constants for
masking and shifting of CONTROL register fields
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/register.h provides macros like FIELD which make it easy to define
shift, mask and length constants for the fields within a register.
Unfortunately register.h also includes a lot of other things, some
of which will only compile in the softmmu build.
Pull the FIELD macro and friends out into a separate header file,
so they can be used in places like target/arm files which also
get built in the user-only configs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484937883-1068-5-git-send-email-peter.maydell@linaro.org
Give an explicit error and abort when a load
from the vector table fails. Architecturally this
should HardFault (which will then immediately
fail to load the HardFault vector and go into Lockup).
Since we don't model Lockup, just report this guest
error via cpu_abort(). This is more helpful than the
previous behaviour of reading a zero, which is the
address of the reset stack pointer and not a sensible
location to jump to.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484937883-1068-4-git-send-email-peter.maydell@linaro.org
[PMM: expanded commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For v7m we need to catch attempts to execute from special
addresses at 0xfffffff0 and above. Previously we did this
with the aid of a hacky special purpose lump of memory
in the address space and a check in translate.c for whether
we were translating code at those addresses.
We can implement this more cleanly using a CPU
unassigned access handler which throws the exception
if the unassigned access is for one of the special addresses.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484937883-1068-3-git-send-email-peter.maydell@linaro.org
[PMM:
* drop the deletion of the "don't interrupt if PC is magic"
code in arm_v7m_cpu_exec_interrupt() -- this is still
required
* don't generate an exception for unassigned accesses
which aren't to the magic address -- although doing
this is in theory correct in practice it will break
currently working guests which rely on the RAZ/WI
behaviour when they touch devices which we haven't
modelled.
* trigger EXCP_EXCEPTION_EXIT on is_exec, not !is_write
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The MRS and MSR instruction handling has a number of flaws:
* unprivileged accesses should only be able to read
CONTROL and the xPSR subfields, and only write APSR
(others RAZ/WI)
* privileged access should not be able to write xPSR
subfields other than APSR
* accesses to unimplemented registers should log as
guest errors, not abort QEMU
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1484937883-1068-2-git-send-email-peter.maydell@linaro.org
[PMM: rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When doing fast read, a certain amount of dummy bytes should be sent
before the read. This number is configurable in the controler CE0
Control Register and needs to be modeled using fake transfers to the
flash module.
This only supports command mode. User mode requires more work and a
possible extension of the m25p80 device model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Marcin Krzemiński <mar.krzeminski@gmail.com>
Message-id: 1484751701-2646-1-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The argument is called "typename", not "name".
[Thanks to Markus for correcting the commit message]
Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <20170125052703.23571-1-lma@suse.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We don't want that commas to be part of the generated documentation,
so remove them.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20170122145407.27476-1-sw@weilnetz.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move makeinfo flags from MAKEINFO to MAKEINFOFLAGS. Fix the call of
quiet-command for target qemu-ga-qapi.texi. Both messed up in commit
56e8bdd.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1484816804-12598-1-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
If a QIOTask has an error set and the calling code uses
qio_task_propagate_error() to steal the reference to
that Error object, the task would not clear its own
reference. This would lead to a double-free when
qio_task_free runs, if the caller had (correctly) freed
the Error object they now owned.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
AioHandlers marked ->is_external must be skipped when aio_node_check()
fails. bdrv_drained_begin() needs this to prevent dataplane from
submitting new I/O requests while another thread accesses the device and
relies on it being quiesced.
This patch fixes the following segfault:
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00005577f6127dad in bdrv_io_plug (bs=0x5577f7ae52f0) at qemu/block/io.c:2650
2650 bdrv_io_plug(child->bs);
[Current thread is 1 (Thread 0x7ff5c4bd1c80 (LWP 10917))]
(gdb) bt
#0 0x00005577f6127dad in bdrv_io_plug (bs=0x5577f7ae52f0) at qemu/block/io.c:2650
#1 0x00005577f6114363 in blk_io_plug (blk=0x5577f7b8ba20) at qemu/block/block-backend.c:1561
#2 0x00005577f5d4091d in virtio_blk_handle_vq (s=0x5577f9ada030, vq=0x5577f9b3d2a0) at qemu/hw/block/virtio-blk.c:589
#3 0x00005577f5d4240d in virtio_blk_data_plane_handle_output (vdev=0x5577f9ada030, vq=0x5577f9b3d2a0) at qemu/hw/block/dataplane/virtio-blk.c:158
#4 0x00005577f5d88acd in virtio_queue_notify_aio_vq (vq=0x5577f9b3d2a0) at qemu/hw/virtio/virtio.c:1304
#5 0x00005577f5d8aaaf in virtio_queue_host_notifier_aio_poll (opaque=0x5577f9b3d308) at qemu/hw/virtio/virtio.c:2134
#6 0x00005577f60ca077 in run_poll_handlers_once (ctx=0x5577f79ddbb0) at qemu/aio-posix.c:493
#7 0x00005577f60ca268 in try_poll_mode (ctx=0x5577f79ddbb0, blocking=true) at qemu/aio-posix.c:569
#8 0x00005577f60ca331 in aio_poll (ctx=0x5577f79ddbb0, blocking=true) at qemu/aio-posix.c:601
#9 0x00005577f612722a in bdrv_flush (bs=0x5577f7c20970) at qemu/block/io.c:2403
#10 0x00005577f60c1b2d in bdrv_close (bs=0x5577f7c20970) at qemu/block.c:2322
#11 0x00005577f60c20e7 in bdrv_delete (bs=0x5577f7c20970) at qemu/block.c:2465
#12 0x00005577f60c3ecf in bdrv_unref (bs=0x5577f7c20970) at qemu/block.c:3425
#13 0x00005577f60bf951 in bdrv_root_unref_child (child=0x5577f7a2de70) at qemu/block.c:1361
#14 0x00005577f6112162 in blk_remove_bs (blk=0x5577f7b8ba20) at qemu/block/block-backend.c:491
#15 0x00005577f6111b1b in blk_remove_all_bs () at qemu/block/block-backend.c:245
#16 0x00005577f60c1db6 in bdrv_close_all () at qemu/block.c:2382
#17 0x00005577f5e60cca in main (argc=20, argv=0x7ffea6eb8398, envp=0x7ffea6eb8440) at qemu/vl.c:4684
The key thing is that bdrv_close() uses bdrv_drained_begin() and
virtio_queue_host_notifier_aio_poll() must not be called.
Thanks to Fam Zheng <famz@redhat.com> for identifying the root cause of
this crash.
Reported-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170124095350.16679-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2c21ee7 ("migration: extend VMStateInfo") missed a void -> int
return conversion for kvm_flic_save().
Fixes: 2c21ee7 ("migration: extend VMStateInfo")
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add calls to hbitmap_is_serializable() (asserting that it returns true)
where necessary (i.e. before every series of (de-)serialization function
invocations).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20161115225746.3590-3-mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Bitmaps with a granularity of 58 or above can be neither serialized nor
deserialized (see the comment in the function added in this series for
an explanation). This patch adds a function so that we can check whether
a bitmap actually can be (de-)serialized at all, thus avoiding failing
the necessary assertion in hbitmap_serialization_granularity().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20161115225746.3590-2-mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
cause 9p clients to hang. Other patches are minor enhancements.
-----BEGIN PGP SIGNATURE-----
iEYEABECAAYFAliIegsACgkQAvw66wEB28LjzwCeIKbBFC/hbc43UqaNX82OGd2v
soYAn0YYXJUAykyjNEMLdhhNp+rABzNk
=1PaE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
This pull request fixes a 2.9 regression and a long standing bug that can
cause 9p clients to hang. Other patches are minor enhancements.
# gpg: Signature made Wed 25 Jan 2017 10:12:27 GMT
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
9pfs: fix offset error in v9fs_xattr_read()
9pfs: local: trivial cosmetic fix in pwritev op
9pfs: fix off-by-one error in PDU free list
tests: virtio-9p: improve error reporting
9pfs: add missing coroutine_fn annotations
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current code tries to copy `read_count' bytes starting at offset
`offset' from a `read_count`-sized iovec. This causes v9fs_pack() to
fail with ENOBUFS.
Since the PDU iovec is already partially filled with `offset' bytes,
let's skip them when creating `qiov_full' and have v9fs_pack() to
copy the whole of it. Moreover, this is consistent with the other
places where v9fs_init_qiov_from_pdu() is called.
This fixes commit "bcb8998fac16 9pfs: call v9fs_init_qiov_from_pdu
before v9fs_pack".
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The server can handle MAX_REQ - 1 PDUs at a time and the virtio-9p
device has a MAX_REQ sized virtqueue. If the client manages to fill
up the virtqueue, pdu_alloc() will fail and the request won't be
processed without any notice to the client (it actually causes the
linux 9p client to hang).
This has been there since the beginning (commit 9f10751365 "virtio-9p:
Add a virtio 9p device to qemu"), but it needs an agressive workload to
run in the guest to show up.
We actually allocate MAX_REQ PDUs and I see no reason not to link them
all into the free list, so let's fix the init loop.
Reported-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Greg Kurz <groug@kaod.org>
Add remaining bits of the Altera NiosII R1 support into qemu, which
is documentation, MAINTAINERS file entry, configure bits, arch_init
and configuration files for both linux-user (userland binaries) and
softmmu (hardware emulation).
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jeff Da Silva <jdasilva@altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Sandra Loosemore <sandra@codesourcery.com>
Cc: Yves Vandervennet <yvanderv@altera.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-Id: <20170118220146.489-8-marex@denx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Add the Altera 10M50 Nios2 GHRD model. This allows emulating the
10M50 development kit with the Nios2 GHRD loaded in the FPGA. It
is possible to boot Linux kernel and run userspace, thus far only
from initrd as storage support is not yet implemented.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jeff Da Silva <jdasilva@altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Sandra Loosemore <sandra@codesourcery.com>
Cc: Yves Vandervennet <yvanderv@altera.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-Id: <20170118220146.489-7-marex@denx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
