We were always passing in that one as "false" to assume that's an read
operation, and we also assume that IOMMU translation would always have
that read permission. A better permission would be IOMMU_NONE since the
replay is after all not a real read operation, but just a page table
rebuilding process.
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
This patch converts the old "is_write" bool into IOMMUAccessFlags. The
difference is that "is_write" can only express either read/write, but
sometimes what we really want is "none" here (neither read nor write).
Replay is an good example - during replay, we should not check any RW
permission bits since thats not an actual IO at all.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
This commit fixes a bug which causes the guest to hang. The bug was
observed upon a "receive overrun" (bit #6 of the ICR register)
interrupt which could be triggered post migration in a heavy traffic
environment. Even though the "receive overrun" bit (#6) is masked out
by the IMS register (refer to the log below) the driver still receives
an interrupt as the "receive overrun" bit (#6) causes the "Other" -
bit #24 of the ICR register - bit to be set as documented below. The
driver handles the interrupt and clears the "Other" bit (#24) but
doesn't clear the "receive overrun" bit (#6) which leads to an
infinite loop. Apparently the Windows driver expects that the "receive
overrun" bit and other ones - documented below - to be cleared when
the "Other" bit (#24) is cleared.
So to sum that up:
1. Bit #6 of the ICR register is set by heavy traffic
2. As a results of setting bit #6, bit #24 is set
3. The driver receives an interrupt for bit 24 (it doesn't receieve an
interrupt for bit #6 as it is masked out by IMS)
4. The driver handles and clears the interrupt of bit #24
5. Bit #6 is still set.
6. 2 happens all over again
The Interrupt Cause Read - ICR register:
The ICR has the "Other" bit - bit #24 - that is set when one or more
of the following ICR register's bits are set:
LSC - bit #2, RXO - bit #6, MDAC - bit #9, SRPD - bit #16, ACK - bit
#17, MNG - bit #18
This bug can occur with any of these bits depending on the driver's
behaviour and the way it configures the device. However, trying to
reproduce it with any bit other than RX0 is challenging and came to
failure as the drivers don't implement most of these bits, trying to
reproduce it with LSC (Link Status Change - bit #2) bit didn't succeed
too as it seems that Windows handles this bit differently.
Log sample of the storm:
27563@1494850819.411877:e1000e_irq_pending_interrupts ICR PENDING: 0x1000000 (ICR: 0x815000c2, IMS: 0x1a00004)
27563@1494850819.411900:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.411915:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412380:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412395:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412436:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412441:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412998:e1000e_irq_pending_interrupts ICR PENDING: 0x1000000 (ICR: 0x815000c2, IMS: 0x1a00004)
* This bug behaviour wasn't observed with the Linux driver.
This commit solves:
https://bugzilla.redhat.com/show_bug.cgi?id=1447935https://bugzilla.redhat.com/show_bug.cgi?id=1449490
Cc: qemu-stable@nongnu.org
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Because filter_mirror_receive_iov() and filter_redirector_receive_iov()
both use the filter_mirror_send() to send packet, so I change
filter_mirror_send() to filter_send() that looks more common.
And fix some codestyle.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The s->outdev have checked in filter_mirror_set_outdev().
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The netdev_add and netdev_del commands should be used nowadays instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Because of previous patch's trace arguments over the limit
of UST backend, so I rewrite the patch.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The tx_bh or tx_timer will free in virtio_net_del_queue() function, when
removing virtio-net queues if the guest doesn't support multiqueue. But
it might be still referenced by virtio_net_set_status(), which needs to
be set NULL. And also the tx_waiting needs to be set zero to prevent
virtio_net_set_status() accessing tx_bh or tx_timer.
Cc: qemu-stable@nongnu.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Network dumping should be done with "-object filter-dump" nowadays.
Using "-net dump" via the VLAN mechanism is considered as deprecated
and might be removed in a future release. So warn the users now
to inform them to user the filter-dump method instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The files tap-haiku.c and tap-aix.c are identical (except one line
of error message). We should avoid such code duplication, so replace
these by a generic tap-stub.c file instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
All the functions in hw/audio/audio.h are called "soundhw_*()"
and live in hw/audio/audiohw.c. Rename the header file for
consistency.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 20170508205735.23444-4-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To make it consistent with the remaining soundhw.c functions and
avoid confusion with the audio_init() function in audio/audio.c,
rename audio_init() to soundhw_init().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 20170508205735.23444-3-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There's no reason to keep the soundhw table in arch_init.c. Move
that code to a new hw/audio/soundhw.c file.
While moving the code, trivial coding style issues were fixed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170508205735.23444-2-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It only needed TARGET_PAGE_SIZE/BITS/BITS_MIN values, so just export
them from exec.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
That is the only function that we need from exec.c, and having to
include the whole sysemu.h for this.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
/me leans to be less sloppy with copyright notices
thanks Dave
This files don't use any function from migration.h, so drop it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
Minor rearrangements due to rebase
Now one just has the interperter, and the other has the basic types.
Once there, add copyright boilerplate.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Use GPL v2 or later. Detected by David.
Create an include for its exported functions.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Add proper header
Many users now prefer to use drive_mirror over NBD as an
alternative to the older migrate -b option; drive_mirror is
more complex to setup but gives you more options (e.g. only
migrating some of the disks if some of them are shared).
Allow the large chunk of block migration code to be compiled
out for those who don't use it.
Based on a downstream-patch we've had for a while by Jeff Cody.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
--
- When compiled out, allow seting block only with false value (eric)
Not used anymore after moving block migration to use capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We have change in the previous patch to use migration capabilities for
it. Notice that we continue using the old command line flags from
migrate command from the time being. Remove the set_params method as
now it is empty.
For savevm, one can't do a:
savevm -b/-i foo
but now one can do:
migrate_set_capability block on
savevm foo
And we can't use block migration. We could disable block capability
unconditionally, but it would not be much better.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
- Maintain shared/enabled dependency (Xu suggestion)
- Now we maintain the dependency on the setter functions
- improve error messages
Create one capability for block migration and one parameter for
incremental block migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
- address all Markus comments
- use Markus and Eric text descriptions
- change logic another time
- improve text messages
We only use it for int64 at this point, I am not able to find a way to
parse an int with MiB units.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
It turns out that it's legal to create a VM with RAMBlocks that aren't
a multiple of the pagesize in use; e.g. a 1025M main memory using
2M host pages. That breaks postcopy's atomic placement of pages,
so disallow it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Unfortunately it's legal to create a VM with a RAM size that's
not a multiple of the underlying host page or huge page size.
Recently I'd changed things to always send host sized pages,
and that breaks if we have say a 1025MB guest on 2MB hugepages.
Unfortunately we can't just make that illegal since it would break
migration from/to existing oddly configured VMs.
Symptom: qemu-system-x86_64: Illegal RAM offset 40100000
as it transmits the fraction of the hugepage after the end
of the RAMBlock (may also cause a crash on the source
- possibly due to clearing bits after the bitmap)
Reported-by: Yumei Huang <yuhuang@redhat.com>
Red Hat bug: https://bugzilla.redhat.com/show_bug.cgi?id=1449037
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
-----BEGIN PGP SIGNATURE-----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=wJvl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'dgilbert/tags/pull-hmp-20170517' into staging
HMP pull
# gpg: Signature made Wed 17 May 2017 07:03:39 PM BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* dgilbert/tags/pull-hmp-20170517:
ramblock: add new hmp command "info ramblock"
utils: provide size_to_str()
ramblock: add RAMBLOCK_FOREACH()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A bunch of fixes that missed the release.
Most notably we are reverting shpc back to enabled by default state
as guests uses that as an indicator that hotplug is supported
(even though it's unused). Unfortunately we can't fix this
on the stable branch since that would break migration.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZHMOuAAoJECgfDbjSjVRp/5IH/3kOa7yV3KUi4QVbQV7WwBH3
LK+/jwIz4UhOZn+bS4qi+gjN6aFhNoBNDFmYsRTWKKdLMvZvkRBMDcv8DMIKeAyl
kG/ispv8VI+GY/CRKnqzPm0FSulv8WPRryxkdGzK4oHiMv+4FpFR0v/n9NRHjwTA
XNJ4k33IqBldXyZwwAzP5dT019EMvbn4bNrkLzlcF2w8mTWPf43eX/kIkRX0cAys
5IVTQVGEOwpnyV0jxJDP+aoVMrqv8xl88LLuRpTgWUo0UnxXL5/GZQOCCUN6DQ7M
BOLmyyP9mT9k8iUI+fQsDxAtY7cL9torq+p985nQdH0nxmI3GCoufn9aJG0J9yc=
=d34x
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_upstream' into staging
pci, virtio, vhost: fixes
A bunch of fixes that missed the release.
Most notably we are reverting shpc back to enabled by default state
as guests uses that as an indicator that hotplug is supported
(even though it's unused). Unfortunately we can't fix this
on the stable branch since that would break migration.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 17 May 2017 10:42:06 PM BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* mst/tags/for_upstream:
exec: abstract address_space_do_translate()
pci: deassert intx when pci device unrealize
virtio: allow broken device to notify guest
Revert "hw/pci: disable pci-bridge's shpc by default"
acpi-defs: clean up open brace usage
ACPI: don't call acpi_pcihp_device_plug_cb on xen
iommu: Don't crash if machine is not PC_MACHINE
pc: add 2.10 machine type
pc/fwcfg: unbreak migration from qemu-2.5 and qemu-2.6 during firmware boot
libvhost-user: fix crash when rings aren't ready
hw/virtio: fix vhost user fails to startup when MQ
hw/arm/virt: generate 64-bit addressable ACPI objects
hw/acpi-defs: replace leading X with x_ in FADT field names
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This function is an abstraction helper for address_space_translate() and
address_space_get_iotlb_entry(). It does the lookup of address into
memory region section, then does proper IOMMU translation if necessary.
Refactor the two existing functions to use it.
This fixes vhost when IOMMU is disabled by guest.
Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If a pci device is not reset by VM (by writing into config space)
and unplugged by VM, after that when VM reboots, qemu may assert:
pcibus_reset: Assertion `bus->irq_count[i] == 0' failed
Cc: qemu-stable@nongnu.org
Signed-off-by: herongguang <herongguang.he@huawei.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to section 2.1.2 of the virtio-1 specification:
"The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state that
a reset is needed. If DRIVER_OK is set, after it sets DEVICE_NEEDS_RESET,
the device MUST send a device configuration change notification to the
driver."
Commit "f5ed36635d8f virtio: stop virtqueue processing if device is broken"
introduced a virtio_error() call that just does that:
- internally mark the device as broken
- set the DEVICE_NEEDS_RESET bit in the status
- send a configuration change notification
Unfortunately, virtio_notify_vector(), called by virtio_notify_config(),
returns right away when the device is marked as broken and the notification
isn't sent in this case.
The spec doesn't say whether a broken device can send notifications
in other situations or not. But since the driver isn't supposed to do
anything but to reset the device, it makes sense to keep the check in
virtio_notify_config().
Marking the device as broken AFTER the configuration change notification was
sent is enough to fix the issue.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This reverts commit dc0ae76770.
Disabling the shpc controller has an undesired side effect.
The PCI bridge remains with no attached devices at boot time,
and the guest operating systems do not allocate any resources
for it, leaving the bridge unusable. Note that the behaviour
is dictated by the pci bridge specification.
Revert the commit and leave the shpc controller even if is not
actually used by any architecture. Slot 0 remains unusable at boot time.
Keep shpc off for QEMU 2.9 machines.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To dump information about ramblocks. It looks like:
(qemu) info ramblock
Block Name PSize Offset Used Total
/objects/mem 2 MiB 0x0000000000000000 0x0000000080000000 0x0000000080000000
vga.vram 4 KiB 0x0000000080060000 0x0000000001000000 0x0000000001000000
/rom@etc/acpi/tables 4 KiB 0x00000000810b0000 0x0000000000020000 0x0000000000200000
pc.bios 4 KiB 0x0000000080000000 0x0000000000040000 0x0000000000040000
0000:00:03.0/e1000.rom 4 KiB 0x0000000081070000 0x0000000000040000 0x0000000000040000
pc.rom 4 KiB 0x0000000080040000 0x0000000000020000 0x0000000000020000
0000:00:02.0/vga.rom 4 KiB 0x0000000081060000 0x0000000000010000 0x0000000000010000
/rom@etc/table-loader 4 KiB 0x00000000812b0000 0x0000000000001000 0x0000000000001000
/rom@etc/acpi/rsdp 4 KiB 0x00000000812b1000 0x0000000000001000 0x0000000000001000
Ramblock is something hidden internally in QEMU implementation, and this
command should only be used by mostly QEMU developers on RAM stuff. It
is not a command suitable for QMP interface. So only HMP interface is
provided for it.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1494562661-9063-4-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Moving the algorithm from print_type_size() into size_to_str() so that
other component can also leverage it. With that, refactor
print_type_size().
The assert() in that logic is removed though, since even UINT64_MAX
would not overflow.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1494562661-9063-3-git-send-email-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
So that it can simplifies the iterators.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1494562661-9063-2-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=gc5Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue, 2017-05-17
# gpg: Signature made Wed 17 May 2017 02:37:54 PM BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* ehabkost/tags/x86-and-machine-pull-request: (22 commits)
tests: Add [+-]feature and feature=on|off test cases
s390-pcibus: No need to set user_creatable=false explicitly
xen-sysdev: Remove user_creatable flag
virtio-mmio: Remove user_creatable flag
sysbus-ohci: Remove user_creatable flag
hpet: Remove user_creatable flag
generic-sdhci: Remove user_creatable flag
esp: Remove user_creatable flag
fw_cfg: Remove user_creatable flag
unimplemented-device: Remove user_creatable flag
isabus-bridge: Remove user_creatable flag
allwinner-ahci: Remove user_creatable flag
sysbus-ahci: Remove user_creatable flag
kvmvapic: Remove user_creatable flag
ioapic: Remove user_creatable flag
kvmclock: Remove user_creatable flag
pflash_cfi01: Remove user_creatable flag
fdc: Remove user_creatable flag from sysbus-fdc & SUNW,fdtwo
iommu: Remove FIXME comment about user_creatable=true
xen-backend: Remove FIXME comment about user_creatable flag
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
