The DPL is stored in the flags and not in the selector. In fact, the RPL
may differ from the DPL at some point in time, and so we were corrupting
the guest state so far.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Share same error handing, and rename this function after
MCIP (Machine Check In Progress) flag.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Add function for checking whether current CPU support mca broadcast.
Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When the following test case is injected with mce command, maybe user could not
get the expected result.
DATA
command cpu bank status mcg_status addr misc
(qemu) mce 1 1 0xbd00000000000000 0x05 0x1234 0x8c
Expected Result
panic type: "Fatal Machine check"
That is because each mce command can only inject the given cpu and could not
inject mce interrupt to other cpus. So user will get the following result:
panic type: "Fatal machine check on current CPU"
"broadcast" option is used for injecting dummy data into other cpus. Injecting
mce with this option the expected result could be gotten.
Usage:
Broadcast[on]
command broadcast cpu bank status mcg_status addr misc
(qemu) mce -b 1 1 0xbd00000000000000 0x05 0x1234 0x8c
Broadcast[off]
command cpu bank status mcg_status addr misc
(qemu) mce 1 1 0xbd00000000000000 0x05 0x1234 0x8c
Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Clean up cpu_inject_x86_mce() for later patch.
Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
simple cleanup and use existing helper: kvm_check_extension().
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Make use of the new KVM_NMI IOCTL to send NMIs into the KVM guest if the
user space raised them. (example: qemu monitor's "nmi" command)
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Change checkpatch.pl for QEMU use:
- Root directory detection
- Forbid tabs
- Indent at 4 spaces
- Allow typedefs
- Enforce brace use even for single statement blocks
- Don't suggest nonexistent cleanup tools
Mention the script in CODING_STYLE.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
isa_mem_base is computed from registers during reset, but due to QEMU
limitations some devices (e.g. VGA card) need to know it earlier when
they are registered.
Workaround this by setting the value during registration instead of
reset.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The PL190 implementation keeps the default vector address
in vect_addr[16], but we weren't using this for writes to
the DEFVECTADDR register. As a result of this fix the
default_addr structure member is unused and we can delete it.
Reported-by: Himanshu Chauhan <hschauhan@nulltrace.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Some tests in FPU emulation code were wrongly using float64_is_nan()
before commit 185698715d, and wrongly
using float64_is_quiet_nan() after. Fix them by using float64_is_any_nan()
instead.
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The current FPU code returns 0.0 if one of the operand is a
signaling NaN and the VXSNAN exception is disabled.
fload_invalid_op_excp() doesn't return a qNaN in case of a VXSNAN
exception as the operand should be propagated instead of a new
qNaN to be generated. Fix that by calling fload_invalid_op_excp()
only for the exception generation (if enabled), and use the softfloat
code to correctly compute the result.
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
use qemu_malloc() instead of direct use of malloc().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
deassert intx on device reset.
So far pci_device_reset() is used for system reset.
In that case, interrupt controller is reset at the same time so that
all irq is are deasserted.
But now pci bus reset/flr is supported, and in that case irq needs to be
disabled explicitly.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Recently PXA2xx lcd have stopped to be updated incrementally (picture
frozen). This patch fixes that by passing non min/max x/y, but rather
(correctly) x/y and w/h.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
vmstate_pxa2xx_i2c incorrectly recursed to itself instead of going
to store slave device. Fix that stop stop qemu from segfaulting
during savevm for pxa2xx-based devices.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Second instance of scoop contains registers shifted to 0x40 from the start
of the page. Instead of messing with register mapping, just limit register
address to 0x00..0x3f.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Mainstone board has two flash chips (emulated by two ram regions), however
currently code tries to allocate them with the same name, which fails.
Fix that to make mainstone emulation work again.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
I'm using the Qemu program with VNC I/O, and I had some problems with
my keyboard layout, so I've prepared a definition to be included in
Qemu, built from Xorg description.
Signed-off-by: Frédéric Boiteux <fboiteux@free.fr>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When operating on the SCIF, process all the received characters, as long
as the FIFO can handle them.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When a modifier key is pressed or released, the USB HID keyboard still
answers NAK, unless another key is also pressed or released.
The patch fixes that by calling usb_hid_changed() when a modifier key
is pressed or released.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
floatx80_is_{quiet,signaling}_nan() functions are incorrectly detecting
the type of NaN, depending on SNAN_BIT_IS_ONE, one of the two is
returning the correct value, and the other true for any kind of NaN.
This patch fixes that by applying the same kind of comparison as for
other float formats, but taking into account the explicit bit.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use this for assignment to the low byte or low word of a register.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Load/store reversed (lwr/swr) are insns that endian translate
the sub-word part of the address and byteswap the data lanes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
Patch a6a7005d14 generated
broken device paths. We snprintf with a length shorter
than the output, so the last character is discarded and replaced
by the null byte. Fix it up by snprintf to a buffer
which is larger by 1 byte and then memcpy the data (without
the null byte) to where we need it.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix several bugs in NaN handling:
* e in fcmpe* only changes qNaN handling
* FCC is unchanged if an exception is raised
* clear previous FTT before setting it
Reported-by: Mateusz Loskot <mateusz@loskot.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add support for logging the start of instructions in TCG
code debug dumps for ARM targets.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Break the TB after reading the count register. This makes it
possible to take timer interrupts immediately after a read of
a possibly expired timer.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
When reading cp0_count from a timer with a late trigger that should
already have expired, expire it and raise the timer irq.
This makes it possible for guest code (e.g, Linux) that first read
cp0_count, then compare it with cp0_compare and check for raised
timer interrupt lines to run reliably.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
