A misplaced $(quiet-@) meant that "make clean" and "make distclean" did
not work properly.
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code base has some C source and header files that don't get indexed
because their name ends with .inc:
$ git ls-files "*.[ch].inc" | wc -l
66
Add them to the list.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160258069310.900922.1495166540282536628.stgit@bahia.lan>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use $(findstring) instead of $(filter) to detect -n/-k
as different versions of MAKE fill in $(MAKEFLAGS) differently.
Do not bother running ninja at all if -nq is passed.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201026155854.3074290-1-pbonzini@redhat.com>
Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The rules to build Makefile.mtest are suffering from the "tunnel vision"
problem that is common with recursive makefiles. Makefile.mtest depends
on build.ninja, but Make does not know when build.ninja needs to be
rebuilt before creating Makefile.mtest.
To fix this, separate the ninja invocation into the "regenerate build
files" phase and the QEMU build phase. Sentinel files such as
meson-private/coredata.dat or build.ninja are used to figure out the
phases that haven't run yet; however, because those files' timestamps
are not guaranteed to be touched, the usual makefile stamp-file trick
is used on top.
Reported-by: Havard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the build is done entirely by Meson, there is no need
to keep the Makefile conversion. Instead, we can ask Ninja about
the targets it exposes and forward them.
The main advantages are, from smallest to largest:
- reducing the possible namespace pollution within the Makefile
- removal of a relatively large Python program
- faster build because parsing Makefile.ninja is slower than
parsing build.ninja; and faster build after Meson runs because
we do not have to generate Makefile.ninja.
- tracking of command lines, which provides more accurate rebuilds
In addition the change removes the requirement for GNU make 3.82, which
was annoying on Mac, and avoids bugs on Windows due to ninjatool not
knowing how to convert Windows escapes to POSIX escapes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Group similar rules, add comments to "else" and "endif" lines,
detect too-old config-host.mak before messing things up.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Without pipefail, it is possible to miss failures if the recipes
include pipes.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tools usually expect the index files to be in the source tree, eg. emacs.
This is already the case when doing out-of-tree builds, but with in-tree
builds they end up in the build directory.
Force cscope, ctags and etags to put them in the source tree.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160277334665.1754102.10921580280105870386.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Build the library via the main meson.build just like for capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libfdt.a, which we wouldn't
do before-hand, and lets us remove the whole recursive make machinery.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SLIRP uses Meson so it could become a subproject in the future,
but our choice of configure options is not yet supported in Meson
(https://github.com/mesonbuild/meson/pull/7740).
For now, build the library via the main meson.build just like for
capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libslirp.a, which we wouldn't
do before-hand.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are better ways to do this, e.g. meson cmake subproject,
but that requires cmake 3.7 and some of our CI environments
only provide cmake 3.5.
Nor can we add a meson.build file to capstone/, because the git
submodule would then always report "untracked files". Fixing that
would require creating our own branch on the qemu git mirror, at
which point we could just as easily create a native meson subproject.
Instead, build the library via the main meson.build.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libcapstone.a, which we wouldn't
do before-hand. In addition, the use of the configuration header file
instead of command-line -DEFINES means that we will rebuild the
capstone objects with changes to meson.build.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Right now all "make check" targets depend blindly on "all". If Meson
is 0.56.0 or newer, we can use the correct dependencies using the new
"depends" entry in "meson introspect --tests".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The QEMU_GA_MSI_ENABLED config-host.mak variable is emitted by
./configure. meson.build actually checks for CONFIG_QGA_MSI_ENABLED:
summary_info += {'QGA MSI support': config_host.has_key('CONFIG_QGA_MSI_ENABLED')}
Rename QEMU_GA_MSI_ENABLED to CONFIG_QGA_MSI for consistency with
CONFIG_QGA_VSS. Also use 'y' instead of 'yes' for consistency.
This fixes the feature summary printed by meson.build.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200914095231.621068-4-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert qemu-qmp-ref to rST format. This includes dropping
the plain-text, pdf and info format outputs for this document;
as with all our other Sphinx-based documentation, we provide
HTML and manpage only.
The qemu-qmp-ref.rst is somewhat more stripped down than
the .texi was, because we do not (currently) attempt to
generate indexes for the commands, events and data types
being documented.
Again, we drop the direct link from index.html.in now that
the QMP ref is part of the interop manual.
This commit removes the code from the root meson.build file that
handled the various Texinfo-based outputs, because we no longer
generate any documentation except for the Sphinx HTML manuals and the
manpages, and the code can't handle having an empty list of files
to process.. We'll do further cleanup of the remainders of
Texinfo support in subsequent commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-10-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unicode legacy literal dumbed down to plain string literal, TODO
comment on displaying QEMU version added, "make html" fixed,
storage-daemon/qapi/meson.build updated]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The file "BaseTools/Source/Python/UPT/Dll/sqlite3.dll" was removed in edk2
commit 26e2b295ec7a ("BaseTools:Remove unused
BaseTools\Source\Python\UPT\Dll", 2019-05-08), part of edk2-stable201905,
so skipping it in the outermost in-tree "clean" rule is unnecessary.
Remove the obsolete pathname reference.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1852196
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908072939.30178-2-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
- Expand CODING_STYLE.rst a little more
- usb-host build fix
- allow check-softfloat unit tests without TCG
- simplify mips imm_branch so compiler isn't confused
- mark ppc64abi32 for deprecation
- more compiler soothing in pch_rev_id
- allow acceptance to skip missing binaries
- more a bunch of plugins to contrib
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl9Z9wkACgkQ+9DbCVqe
KkRbkQf9HLRDEUSy/1LqbU7ncHzgCmnlzC0MKCqn/L3e+M916naO3xhu0tbJN9Ks
nxu9irY1mGrj/gK+gJ9lr50GOvcc8XCFTpE82MisMRWWFeVRt3vYLAql7WcY0ioM
K6jMMfoVswmVetP034llQhsAt9zvFimL89kp4O4i2Mjw5shsBIPfharXnnhL4EgS
ykKmUdLWxAJPSOJJA71IAFP9UzMYfXg7/NHFK1SMVOWZjMT18aoa6YDzBpbr4KzX
4vOvgGK3tBlVuOooSew7By6iR5oBPa5GP7O9Z78osCsyvzJMPcoNxQZyvgnS0Tda
q6+/QeF9/ooDPkg5Jq6Z8EAsY0q+XA==
=PIOR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-fixes-100920-1' into staging
Various misc and testing fixes:
- Expand CODING_STYLE.rst a little more
- usb-host build fix
- allow check-softfloat unit tests without TCG
- simplify mips imm_branch so compiler isn't confused
- mark ppc64abi32 for deprecation
- more compiler soothing in pch_rev_id
- allow acceptance to skip missing binaries
- more a bunch of plugins to contrib
# gpg: Signature made Thu 10 Sep 2020 10:51:05 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-fixes-100920-1:
plugins: move the more involved plugins to contrib
tests/acceptance: Add Test.fetch_asset(cancel_on_missing=True)
tests: bump avocado version
hw/i386: make explicit clearing of pch_rev_id
configure: don't enable ppc64abi32-linux-user by default
docs/system/deprecated: mark ppc64abi32-linux-user for deprecation
target/mips: simplify gen_compute_imm_branch logic
tests/meson.build: fp tests don't need CONFIG_TCG
usb-host: restrict workaround to new libusb versions
CODING_STYLE.rst: flesh out our naming conventions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the meson submodule is present, we don't really want to index its
source code. Consolidate the find command in a single place and use
it for cscope, ctags and etags. Note that this now causes ctags and
etags to also index assembly files, but this is okay since they both
have been supporting assembly since 2001 at least.
Signed-off-by: Greg Kurz <groug@kaod.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <159916247553.691541.10480293747685886851.stgit@bahia.lan>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We have an exploding complexity problem in the testing so lets just
move the more involved plugins into contrib. tests/plugins still exist
for the basic plugins that exercise the API. We restore the old
pre-meson style Makefile for contrib as it also doubles as a guide for
out-of-tree plugin builds.
While we are at it add some examples to the documentation and a
specific plugins build target.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200909112742.25730-11-alex.bennee@linaro.org>
All Meson executables should specify their dependencies explicitly, either
directly or indirectly via declare_dependency. Makefiles instead did
not propagate dependencies correctly from static libraries, for example.
Therefore, flags for dependencies need not be included in QEMU_CFLAGS.
LIBS is not used at all, so drop that one as well.
In a few cases the dependencies were not yet specified, so add them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Makefile.objs, the .d files and various CONFIG_* symbols are not
used anymore by the Make side of the build; they are only processed
by Meson. We can delete them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use meson benchmark() for them, adjust mtest2make.py for that.
A new target "make bench" can be used to run all benchmarks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-14-marcandre.lureau@redhat.com>
[Rewrite mtest2make part. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Doing 'make clean' or 'make distclean' in a freshly cloned tree results in:
make: *** No rule to make target 'ninja-clean', needed by 'clean'. Stop.
Make the fallback rules global. While here, change the ninjatool recipe to
always have a zero exit status and thus prevent make to emit a warning.
Fixes: a56650518f ("configure: integrate Meson in the build system")
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159897001659.442705.15538955005543395950.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is a bit of a pain to be forced to run configure before being able
to use cscope and friends. Add back the rules to build them in-tree
as before commit a56650518f.
Fixes: a56650518f ("configure: integrate Meson in the build system")
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159897001005.442705.16516671603870288336.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The missing "/all" suffix prevents the pc-bios/ parts of the build
from running.
In the meanwhile, -Wall has moved from QEMU_CFLAGS to CFLAGS. Simplify
everything by not passing down CFLAGS, and add -Wall in the recursive
Makefiles.
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Fixes: 5e6d1573b4 ("remove Makefile.target", 2020-08-21)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200826110419.528931-9-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now covered by meson
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826130622.553318-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To keep sync with other RISC-V machines, change the default bios to
use generic platform fw_dynamic.elf image.
While we are here, add some comments to mention that using ELF files
for the Spike machine was intentional.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1596439832-29238-6-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Update virt and sifive_u machines to use the opensbi fw_dynamic bios
image built for the generic FDT platform.
Remove the out-of-date no longer used bios images.
Note:
1. To test 32-bit Linux kernel on QEMU 'sifive_u' 32-bit machine,
the following patch is needed:
http://lists.infradead.org/pipermail/linux-riscv/2020-July/001213.html
2. To test 64-bit Linux 5.3 kernel on QEMU 'virt' or 'sifive_u' 64-bit
machines, the following commit should be cherry-picked to 5.3:
commit 922b0375fc93fb1a20c5617e37c389c26bbccb70
Author: Albert Ou <aou@eecs.berkeley.edu>
Date: Fri Sep 27 16:14:18 2019 -0700
riscv: Fix memblock reservation for device tree blob
Linux 5.4 or above already contains this commit/fix.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1596439832-29238-5-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Note that sl and sv keymaps were not created by qemu-keymap.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson warns if xgettext is not found. In the future we may want to add
a required argument to i18n.gettext(); in the meanwhile, I am adding a
--enable-gettext/--disable-gettext option and feature detection in
configure. This preserves QEMU's default behavior of detecting system
features, without any warning, if neither --enable-* nor --disable-*
is requested.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the create-config logic to meson.build; create a
configuration_data object and let meson handle the
quoting and output.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For now, sphinx is run on every invocation of make. The previous mechanism
using $(wildcard) is not reproducible in Meson and was also brittle; for
example some .rst.inc files were left out. The next patch will introduce
a Sphinx extension to emit a depfile.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The binaries move to the root directory, e.g. qemu-system-i386 or
qemu-arm. This requires changes to qtests, CI, etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hw/Makefile.objs is gone so there is more code that can be removed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The executable moves back from libexecdir to bindir, when it was
in 5.0 and earlier.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Needed by linux-user/s390x/cpu_loop.c; this removes the only use of HOST_CC.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can use config-host.mak to decide whether the tool has to be built,
apart from that the conversion is straightforward.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The libiscsi pkg-config information is extracted from config-host.mak and
used to link vhost-user-blk.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This shows how to do some "computations" in meson.build using its array
and dictionary data structures, and also a basic usage of the sourceset
module for conditional compilation.
Notice the new "if have_system" part of util/meson.build, which fixes
a bug in the old build system was buggy: util/dbus.c was built even for
non-softmmu builds, but the dependency on -lgio was lost when the linking
was done through libqemuutil.a. Because all of its users required gio
otherwise, the bug was hidden. Meson instead propagates libqemuutil's
dependencies down to its users, and shows the problem.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rules to execute tests are generated by a simple Python program
that integrates into the existing "make check" mechanism. This
provides familiarity for developers, and also allows piecewise
conversion of the testsuite Makefiles to meson.
The generated rules are based on QEMU's existing test harness
Makefile and TAP parser.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not use cgcc; instead, extract compilation commands from compile_commands.json
and invoke sparse directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Meson build system is integrated in the existing configure/make steps
by invoking Meson from the configure script and converting Meson's build.ninja
rules to an included Makefile.
build.ninja already provides tags/ctags/cscope rules, so they are removed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The next patch will prevent modifying the prefix on "make install". Adjust the
creation of the installer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.
Alternatively you can use a fine-grained dependency, e.g.
target/arm/translate.o: target/arm/decode-neon-shared.inc.c
With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.
The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.
Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files. The editorconfig
file is adjusted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
libqemustub.a has been removed in commit ebedb37c8d ("Makefile: Remove
libqemustub.a"). Some remainders have been missed. Remove them now.
Message-Id: <20200804170055.2851-8-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The config-devices.mak files are generated by "make", and so they
should be deleted by "make clean".
(This is different from config-host.mak and config-all-disas.mak,
which are created by "configure" and so only deleted by
"make distclean".)
If we don't delete these files on "make clean", then the build
tree is left in a state where it has the config-devices.mak
file but not the config-devices.mak.d file, and make will not
realize that it needs to rebuild config-devices.mak if, for
instance, hw/sd/Kconfig changes.
NB: config-all-devices.mak is also generated by "make", but we
already remove it on "make clean".
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200717152508.10272-1-peter.maydell@linaro.org
There is no reason to write MINIKCONF_DEPS manually, since minikconf.py
emits a dependency file, and also no reason to list multiple Kconfig
files on the command line since they can be included from a master file
in the top-level source directory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expose the CONFIG_TCG selector to let minikconf.py uses it.
When building with --disable-tcg build, this helps to deselect
devices that are TCG-dependent.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the accel selectors from the global Kconfig.host to their
own Kconfig file.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Having one entry per line helps reviews/refactors. As we are
going to modify the MINIKCONF variables, split them now to
ease further review.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One might get caught trying to understand unexpected Makefile
behavior. Trailing backslash can help to split very long lines,
but are rather dangerous when nothing follow. Preserve other
developers debugging time by removing this one.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
