TILE-Gx has been removed during the v6.0 release (see
commit 2cc1a90166 "Remove deprecated target tilegx"),
no need to mention it in the list of "supported targets".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This fixes the invalid bInterfaceProtocol value 0x04 in the USB audio
AudioControl descriptors. It should be zero. While Linux and Windows
forgive this error, macOS 14 Sonoma does not. The usb-audio device does
not appear in macOS sound settings even though the device is recognized
and shows up in USB system information. According to the USB audio class
specs 1.0-4.0, valid values are 0x00, 0x20, 0x30 and 0x40. (Note also
that Linux prints the warning "unknown interface protocol 0x4, assuming
v1", but then proceeds as if the value was zero.)
This also fixes the invalid wTotalLength value in the multi-channel
setup AudioControl interface header descriptor (used when multi=on
and out.mixing-engine off). The combined length of all the descriptors
there add up to 0x37, not 0x38. In Linux, "lsusb -D ..." displays
incomplete descriptor information when this length is incorrect.
Signed-off-by: Joonas Kankaala <joonas.a.kankaala@gmail.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
- Avihai's two fixes on error paths
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZgmsOxIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1waYKQD9G/B4c5u94Puhkr4o+K4M3FZ3J1pSpYRd
nMAlrCWYLHQBAKV5q8DvgXbRNzT/Q+1UX7psxIsjyaqljxyJoZ+dIgAD
=hucV
-----END PGP SIGNATURE-----
Merge tag 'migration-20240331-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull for 9.0-rc2
- Avihai's two fixes on error paths
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZgmsOxIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1waYKQD9G/B4c5u94Puhkr4o+K4M3FZ3J1pSpYRd
# nMAlrCWYLHQBAKV5q8DvgXbRNzT/Q+1UX7psxIsjyaqljxyJoZ+dIgAD
# =hucV
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 31 Mar 2024 19:32:27 BST
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240331-pull-request' of https://gitlab.com/peterx/qemu:
migration/postcopy: Ensure postcopy_start() sets errp if it fails
migration: Set migration error in migration_completion()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are several places where postcopy_start() fails without setting
errp. This can cause a null pointer de-reference, as in case of error,
the caller of postcopy_start() copies/prints the error set in errp.
Fix it by setting errp in all of postcopy_start() error paths.
Cc: qemu-stable <qemu-stable@nongnu.org>
Fixes: 908927db28 ("migration: Update error description whenever migration fails")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240328140252.16756-3-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
After commit 9425ef3f99 ("migration: Use migrate_has_error() in
close_return_path_on_source()"), close_return_path_on_source() assumes
that migration error is set if an error occurs during migration.
This may not be true if migration errors in migration_completion(). For
example, if qemu_savevm_state_complete_precopy() errors, migration error
will not be set.
This in turn, will cause a migration hang bug, similar to the bug that
was fixed by commit 22b04245f0 ("migration: Join the return path
thread before releasing to_dst_file"), as shutdown() will not be issued
for the return-path channel.
Fix it by ensuring migration error is set in case of error in
migration_completion().
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Fixes: 9425ef3f99 ("migration: Use migrate_has_error() in close_return_path_on_source()")
Acked-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20240328140252.16756-2-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
-----BEGIN PGP SIGNATURE-----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=7UPB
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-for-9.0-3-20240331' of https://gitlab.com/npiggin/qemu into staging
Various fixes for recent regressions and new code.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmYJEQMACgkQZ7MCdqhi
# HK6l0BAAkVf/BXKJxMu3jLvCpK/fBYGytvfHBR9PdWeBwIirqsk3L8eI/Fb5qkMZ
# NMrfECyHR9LTcWb6/Pi/PGciNNWeyleN6IuVBeWfraIFyfHcxpwEKH8P+cXr5EWq
# WDg+1GUt9+FHuAC9UdGZ81UzX7qeI9VfD3wHceqJ/XRU3qjj67DPZjTpsvxuP64+
# N7MhdEM69F34uiIAn1aNCceXiS00dvtu6lDl3+18TzT8sNc6S3qdyxVcqfRhTJfY
# FMZIN3j2hQrVOElEQE9vAOeJyjAQCM+U0y3XZIZHFUw/GTwKV0tm08RFnnxprteG
# 67vR5uXrDEELnU/1PA1YeyaBMA3Z3Nc36XbGf8zTD6rKkS2z0lWMcs72pPIxbMXj
# c4FdnHaE+Q5ngy5s1p6bm5xM7WOEhrsJkgIu2N0weRroe0nAxywDWw3uQlMoV8Oc
# Xet/xM2IKdc0PLzTvFO7xKnW3oqavJ4CX/6XgrGBoMDZKO1JRqaMixGtYKmoH/1h
# 96+jdRbPTZAY8aoiFWW7t065lvdWt74A6QITcn2Kqm04j3MGJfyWMU6dakBzwuri
# PhOkf40o8qn8KN0JNfSO+IXhYVRRotLO/s9H7TEyQiXm25qrGMIF9FErnbDseZil
# rGR4eL0lcwJboYH9RSRWg0NNqpUekvqBzdnS+G0Ad3J+qaMYoik=
# =7UPB
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 31 Mar 2024 08:30:11 BST
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-9.0-3-20240331' of https://gitlab.com/npiggin/qemu:
tests/avocado: ppc_hv_tests.py set alpine time before setup-alpine
tests/avocado: Fix ppc_hv_tests.py xorriso dependency guard
target/ppc: Do not clear MSR[ME] on MCE interrupts to supervisor
target/ppc: Fix GDB register indexing on secondary CPUs
target/ppc: Restore [H]DEXCR to 64-bits
target/ppc/mmu-radix64: Use correct string format in walk_tree()
hw/ppc/spapr: Include missing 'sysemu/tcg.h' header
spapr: nested: use bitwise NOT operator for flags check
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the time is wrong, setup-alpine SSL certificate checks can fail.
setup-alpine is used to bring up the network, but it doesn't seem
to to set NTP time before the failing SSL checks. This test has
recently started failing presumably because the default time has
now fallen too far behind.
Fix this by setting time from the host time before running setup-alpine.
Fixes: c9cb496710 ("tests/avocado: ppc add hypervisor tests")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
For some reason the skipIf missing_deps() check fails to skip the test
if it comes after the skipUnless lines, causing an error running on
systems without xorriso.
Avocado implements skipUnless is just an inverted skipIf, so it's not
clear what the bug is or why this fixes it. For now it's enough to
get things working.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2246
Fixes: c9cb496710 ("tests/avocado: ppc add hypervisor tests")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Hardware clears the MSR[ME] bit when delivering a machine check
interrupt, so that is what QEMU does.
The spapr environment runs in supervisor mode though, and receives
machine check interrupts after they are processed by the hypervisor,
and MSR[ME] must always be enabled in supervisor mode (otherwise it
could checkstop the system). So MSR[ME] must not be cleared when
delivering machine checks to the supervisor.
The fix to prevent supervisor mode from modifying MSR[ME] also
prevented it from re-enabling the incorrectly cleared MSR[ME] bit
when returning from handling the interrupt. Before that fix, the
problem was not very noticable with well-behaved code. So the
Fixes tag is not strictly correct, but practically they go together.
Found by kvm-unit-tests machine check tests (not yet upstream).
Fixes: 678b6f1af7 ("target/ppc: Prevent supervisor from modifying MSR[ME]")
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The GDB server protocol assigns an arbitrary numbering of the SPRs.
We track this correspondence on each SPR with gdb_id, using it to
resolve any SPR requests GDB makes.
Early on we generate an XML representation of the SPRs to give GDB,
including this numbering. However the XML is cached globally, and we
skip setting the SPR gdb_id values on subsequent threads if we detect
it is cached. This causes QEMU to fail to resolve SPR requests against
secondary CPUs because it cannot find the matching gdb_id value on that
thread's SPRs.
This is a minimal fix to first assign the gdb_id values, then return
early if the XML is cached. Otherwise we generate the XML using the
now already initialised gdb_id values.
Fixes: 1b53948ff8 ("target/ppc: Use GDBFeature for dynamic XML")
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The DEXCR emulation was recently changed to a 32-bit register, possibly
because it does have a 32-bit read-only view. It is a full 64-bit
SPR though, so use the corresponding 64-bit write functions.
Fixes: fbda88f7ab ("target/ppc: Fix width of some 32-bit SPRs")
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
'mask', 'nlb' and 'base_addr' are all uin64_t types.
Use the corresponding PRIx64 format.
Fixes: d2066bc50d ("target/ppc: Check page dir/table base alignment")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
"sysemu/tcg.h" declares tcg_enabled(), and is implicitly included.
Include it explicitly to avoid the following error when refactoring
headers:
hw/ppc/spapr.c:2612:9: error: call to undeclared function 'tcg_enabled'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
if (tcg_enabled()) {
^
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Check for flag bit in H_GUEST_GETSET_STATE_FLAG_GUEST_WIDE need to use
bitwise NOT operator to ensure no other flag bits are set.
Resolves: Coverity CID 1540008
Resolves: Coverity CID 1540009
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Using log_pc produces the pc at the beginning of TB,
not the actual pc installed by cpu_restore_state_from_tb,
which could be any of the guest instructions within TB.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The 'sign' computation is attempting to locate the sign bit that has
been repeated, so that we can test if that bit is known zero. That
computation can be zero if there are no known sign repetitions.
Cc: qemu-stable@nongnu.org
Fixes: 93a967fbb5 ("tcg/optimize: Propagate sign info for shifting")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2248
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Along this path we have already skipped the insn to be
nullified, so the subsequent insn should be executed.
Cc: qemu-stable@nongnu.org
Reported-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The 32-bit PA-7300LC (PCX-L2) CPU and the 64-bit PA8700 (PCX-W2) CPU
use different diag instructions to save or restore the CPU registers
to/from the shadow registers.
Implement those per-CPU architecture diag instructions to fix those
parts of the HP ODE testcases (L2DIAG and WDIAG, section 1) which test
the shadow registers.
Signed-off-by: Helge Deller <deller@gmx.de>
[rth: Use decodetree to distinguish cases]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
This operation is trivial and does not require a helper.
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This reverts commit 46d4d36d0b.
The reverted commit changed to emit warnings instead of errors when
vhost is requested but vhost initialization fails if vhostforce option
is not set.
However, vhostforce is not meant to ignore vhost errors. It was once
introduced as an option to commit 5430a28fe4 ("vhost: force vhost off
for non-MSI guests") to force enabling vhost for non-MSI guests, which
will have worse performance with vhost. The option was deprecated with
commit 1e7398a140 ("vhost: enable vhost without without MSI-X") and
changed to behave identical with the vhost option for compatibility.
Worse, commit bf769f742c ("virtio: del net client if net_init_tap_one
failed") changed to delete the client when vhost fails even when the
failure only results in a warning. The leads to an assertion failure
for the -netdev command line option.
The reverted commit was intended to avoid that the vhost initialization
failure won't result in a corrupted netdev. This problem should have
been fixed by deleting netdev when the initialization fails instead of
ignoring the failure with an arbitrary option. Fortunately, commit
bf769f742c ("virtio: del net client if net_init_tap_one failed"),
mentioned earlier, implements this behavior.
Restore the correct semantics and fix the assertion failure for the
-netdev command line option by reverting the problematic commit.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Some of them are only necessary for POSIX systems. The others are
assigned to function pointers in NetClientInfo that can actually be
NULL.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It is incorrect to have the VIRTIO_NET_HDR_F_NEEDS_CSUM set when
checksum offloading is disabled so clear the bit.
TCP/UDP checksum is usually offloaded when the peer requires virtio
headers because they can instruct the peer to compute checksum. However,
igb disables TX checksum offloading when a VF is enabled whether the
peer requires virtio headers because a transmitted packet can be routed
to it and it expects the packet has a proper checksum. Therefore, it
is necessary to have a correct virtio header even when checksum
offloading is disabled.
A real TCP/UDP checksum will be computed and saved in the buffer when
checksum offloading is disabled. The virtio specification requires to
set the packet checksum stored in the buffer to the TCP/UDP pseudo
header when the VIRTIO_NET_HDR_F_NEEDS_CSUM bit is set so the bit must
be cleared in that case.
Fixes: ffbd2dbd8e ("e1000e: Perform software segmentation for loopback")
Buglink: https://issues.redhat.com/browse/RHEL-23067
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The kernel documentation says:
> The value stored can be of any size, however, all array elements are
> aligned to 8 bytes.
https://www.kernel.org/doc/html/v6.8/bpf/map_array.html
Fixes: 333b3e5fab ("ebpf: Added eBPF map update through mmap.")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
virtio_net_guest_notifier_pending() and virtio_net_guest_notifier_mask()
checked VIRTIO_NET_F_MQ to know there are multiple queues, but
VIRTIO_NET_F_RSS also enables multiple queues. Refer to n->multiqueue,
which is set to true either of VIRTIO_NET_F_MQ or VIRTIO_NET_F_RSS is
enabled.
Fixes: 68b0a6395f ("virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Commit 558f5c42ef gated the local tests with g_test_slow() to skip them
in 'make check'. The reported issue back then was this following CI
problem:
https://lists.nongnu.org/archive/html/qemu-devel/2020-11/msg05510.html
This problem ended up being fixed after it was detected with the
recently added risc-v machine nodes [1]. virtio-9p-test.c is now
creating and removing temporary dirs for each test run, instead of
creating a single dir for the entire qos-test scope.
We're now able to run these tests with 'make check' in the CI, so let's
go ahead and re-enable them.
This reverts commit 558f5c42ef.
[1] https://mail.gnu.org/archive/html/qemu-devel/2024-03/msg05807.html
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20240327142011.805728-3-dbarboza@ventanamicro.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The local 9p driver in virtio-9p-test.c its temporary dir right at the
start of qos-test (via virtio_9p_create_local_test_dir()) and only
deletes it after qos-test is finished (via
virtio_9p_remove_local_test_dir()).
This means that any qos-test machine that ends up running virtio-9p-test
local tests more than once will end up re-using the same temp dir. This
is what's happening in [1] after we introduced the riscv machine nodes:
if we enable slow tests with the '-m slow' flag using
qemu-system-riscv64, this is what happens:
- a temp dir is created;
- virtio-9p-device tests will run virtio-9p-test successfully;
- virtio-9p-pci tests will run virtio-9p-test, and fail right at the
first slow test at fs_create_dir() because the "01" file was already
created by fs_create_dir() test when running with the virtio-9p-device.
The root cause is that we're creating a single temporary dir, via the
construct/destruct callbacks, and this temp dir is kept for the entire
qos-test run.
We can change each test to clean after themselves. This approach would
make the 'create' tests obsolete since we would need to create and
delete dirs/files/symlinks for the cleanup, turning them into the
'unlinkat' tests that comes right after.
We chose a different approach that handles the root cause: do not use
constructor/destructor to create the temp dir. Create one temp dir for
each test, and remove it after the test is complete. This is the
approach taken for other qtests like vhost-user-test.c where each test
requires a setup() and a subsequent cleanup(), all of those instantiated
in the .before callback.
[1] https://mail.gnu.org/archive/html/qemu-devel/2024-03/msg05807.html
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20240327142011.805728-2-dbarboza@ventanamicro.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Overflow indicator should include the effect of the shift step.
We had previously left ??? comments about the issue.
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prepare for proper indication of shladd unsigned overflow.
The UV indicator will be zero/not-zero instead of a single bit.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The cond_need_ext predicate was created while we still had a
32-bit compilation mode. It now makes more sense to treat D
as an absolute indicator of a 64-bit operation.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split do_unit_cond to do_unit_zero_cond to only handle conditions
versus zero. These are the only ones that are legal for UXOR.
Simplify trans_uxor accordingly.
Rename do_unit to do_unit_addsub, since xor has been split.
Properly compute carry-out bits for add and subtract, mirroring
the code in do_add and do_sub.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: b2167459ae ("target-hppa: Implement basic arithmetic")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With r1 as zero is by far the most common usage of UADDCM, as the
easiest way to invert a register. The compiler does occasionally
use the addition step as well, and we can simplify that to avoid
a temp and write directly into the destination.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The carry bits for each nibble N are located in bit (N+1)*4,
so the shift by 3 was off by one. Furthermore, the carry bit
for the most significant carry bit is indeed located in bit 64,
which is located in a different storage word.
Use a double-word shift-right to reassemble into a single word
and place them all at bit 0 of their respective nibbles.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: b2167459ae ("target-hppa: Implement basic arithmetic")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move it to cpu.h, so it can also be used in hppa_form_gva_psw().
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240324080945.991100-2-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Call translator_io_start before write to EIRR.
Move evaluation of EIRR vs EIEM to hppa_cpu_exec_interrupt.
Exit TB after write to EIEM, but otherwise use a straight store.
Reviewed-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The call to gen_helper_read_interval_timer is
identical on both sides of the IF.
Reviewed-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Wide mode provides two more conditions, add them.
Fixes: 59963d8fdf ("target/hppa: Pass d to do_unit_cond")
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240321184228.611897-1-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not clobber the high bits of the address by using a 32-bit deposit.
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The return address comes from IA*Q_Next, and IASQ_Next
is always equal to IASQ_Back, not IASQ_Front.
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a small test to prevent regressions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240325192436.561154-5-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the h != g && shmaddr == NULL && !reserved_va case, target_shmat()
incorrectly mmap()s the initial anonymous range with
MAP_FIXED_NOREPLACE, even though the earlier mmap_find_vma() has
already reserved the respective address range.
Fix by using MAP_FIXED when "mapped", which is set after
mmap_find_vma(), is true.
Fixes: 78bc8ed9a8 ("linux-user: Rewrite target_shmat")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240325192436.561154-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The indices of arguments passed to print_shmat() are all off-by-1,
because arg1 is the ipc() command. Fix them.
New output for linux-shmat-maps test:
3501769 shmat(4784214,0x0000000000800000,SHM_RND) = 0
Fixes: 9f7c97324c ("linux-user: Add strace for shmat")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240325192436.561154-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
