When a device is removed, remove the association with a chardev, if any,
so that the chardev can be re-used later for other devices.
Reported-by: Qunfang Zhang <qzhang@redhat.com>
Fix-suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU does have a "scsi" option (to be used like -device
virtio-blk-pci,drive=foo,scsi=off). However, it only
masks the feature bit, and does not reject the command
if a malicious guest disregards the feature bits and
issues a request.
Without this patch, using scsi=off does not protect you
from CVE-2011-4127.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When an rtc interrupt is reinjected immediately after being acked,
other interrupts should not be reinjected, so do clear their bits.
Also, if the periodic interrupts have been disabled before acking,
do not reinject, as the guest might get very confused!
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hours in 12-hour mode are in the 1-12 range, not 0-11.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 8eb0283 broken device_del by having too overzealous reference counting
checks. Move the reference count checks to qdev_free(), make sure to remove
the parent link on free, and decrement the reference count on property removal.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These comments are used by static code analysis tools and in code reviews
to avoid false warnings because of missing break statements.
The case statements handled here were reported by coverity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The RFBI_READ/RFBI_STATUS code incorrectly uses chip[0] when it should
be using chip[1]. Andrzej Zaborowski <balrog@zabor.org> confirmed this
bug since I don't know this code well.
Reported-by: Dr David Alan Gilbert <davidagilbert@uk.ibm.com>
Reviewed-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
ppm_save() spends upwards of 50% of its time doing divisions. Replace them
with shifts.
Reviewed-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- Send EOP flags to the out channels.
- Send data descriptor metadata to the out channels.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Coverity says that the division by sizeof(*s->rate) might be wrong.
I think that coverity is right.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Coverity complained about local variable key which was only partially
initiated. Only key.st_value was set. As this was also the only part
of key which was used in function symfind, the code could be optimized
by directly passing a pointer to orig_addr.
In bsd-user/elfload.c, fix ec822001a2
was missing. This was a simple replacement of > by >= in symfind, so
I fixed it here without creating an additional patch.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Use the new memory mutator API to simplify the flash remap code;
this allows us to drop the flash_mapped flag.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Fix the sense of the REMAP bit: 0 should mean "map flash",
1 should mean "map RAM".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
* 's390-next' of git://repo.or.cz/qemu/agraf:
s390: fix cpu hotplug / cpu activity on interrupts
s390x: add TR function for EXECUTE
Expose drive_add on all architectures
Add generic drive hotplugging
Compile device-hotplug on all targets
[S390] Add hotplug support
vhost memory management doesn't care about non-memory (e.g. PIO) or non-RAM
regions. Adjust the filtering to reflect that, and move it earlier so it
applies to mem_sections too.
Signed-off-by: Avi Kivity <avi@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
A memset() used to delete an entry in an array did not take into account
the array element's size.
Signed-off-by: Avi Kivity <avi@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
MemoryListener::region_add() gives us a slice of a MemoryRegion, not a
region. Adjust the userspace address to reflect that.
Signed-off-by: Avi Kivity <avi@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
PPC: Add description for the Freescale e500mc core.
pseries: Check for duplicate addresses on the spapr-vio bus
pseries: Populate "/chosen/linux,stdout-path" in the FDT
pseries: Add a routine to find a stable "default" vty and use it
pseries: Emit device tree nodes in reg order
pseries: FDT NUMA extensions to support multi-node guests
pseries: Remove hcalls callback
kvm-ppc: halt secondary cpus when guest reset
console: Fix segfault on screendump without VGA adapter
PPC: monitor: add ability to dump SLB entries
color_reg is expected to hold 32 bit values, so it was too small.
This bug was reported by coverity:
hw/sm501.c:624:
result_independent_of_operands:
color_reg >> 16 is 0 regardless of the values of its operands.
This occurs as the bitwise first operand of '&'.
Cc: Shin-ichiro Kawasaki <kawasaki@juno.dti.ne.jp>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 5632ae46d5 passes the address
of i8259 to qemu_irq_proxy. i8259 is an auto variable with undefined
value outside of mips_malta_init.
This made the interrupt proxy unusable: either QEMU crashes, or
the interrupt handler was not called.
Ethernet for example no longer worked with MIPS Malta.
v2:
While v1 used a static variable for i8259, this patch introduces
a qdev for the malta machine. i8259 is now part of the device status.
This is a minimal qdev implementation to keep the patch small.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* stefanha/trivial-patches:
qemu-nbd: drop loop which can never loop
Make python mandatory
net/socket.c: Fix fd leak in net_socket_listen_init() error paths
gdbstub: Fix fd leak in gdbserver_open() error path
configure: Fix test for supported host CPU type
configure: CONFIG_QEMU_INTERP_PREFIX only for user mode
scsi virtio-blk usb-msd: Clean up device init error messages
Strip trailing '\n' from error_report()'s first argument (again)
qemu-options.hx: fix tls-channel help text
Fix a compile failure on 32 bit hosts (integer constant is too large
for 'unsigned long' type) by correcting a typo where the mask used
for filling in the second f_fsid word had too many 'F's in it.
Also drop the 'L' suffix that allowed this typo to go undetected on
64 bit hosts.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace
error_report("DEVICE-NAME: MESSAGE");
by just
error_report("MESSAGE");
in block device init functions.
DEVICE-NAME is bogus in some cases: it's "scsi-disk" for device
scsi-hd and scsi-cd, "virtio-blk-pci" for virtio-blk-s390, and
"usb-msd" for usb-storage.
There is no real need to put a device name in the message, because
error_report() points to the offending command line option already:
$ qemu-system-x86_64 --nodefaults --enable-kvm -vnc :0 -S -monitor stdio -usb -device virtio-blk-pci
upstream-qemu: -device virtio-blk-pci: virtio-blk-pci: drive property not set
upstream-qemu: -device virtio-blk-pci: Device 'virtio-blk-pci' could not be initialized
And for a monitor command, it's obvious anyway:
$ qemu-system-x86_64 --nodefaults --enable-kvm -vnc :0 -S -monitor stdio -usb
(qemu) device_add virtio-blk-pci
virtio-blk-pci: drive property not set
Device 'virtio-blk-pci' could not be initialized
Reported-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Commit 6daf194d got rid of them, but Hans and Gerd added some more
lately. Tracked down with this Coccinelle semantic patch:
@r@
expression fmt;
position p;
@@
error_report(fmt, ...)@p
@script:python@
fmt << r.fmt;
p << r.p;
@@
if "\\n" in str(fmt):
print "%s:%s:%s:%s" % (p[0].file, p[0].line, p[0].column, fmt)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* aneesh/for-upstream:
hw/9pfs: Add support to use named socket for proxy FS
hw/9pfs: man page for proxy helper
hw/9pfs: Documentation changes related to proxy fs
hw/9pfs: Proxy getversion
hw/9pfs: xattr interfaces in proxy filesystem driver
hw/9pfs: File ownership and others
hw/9pfs: Add stat/readlink/statfs for proxy FS
hw/9pfs: Create other filesystem objects
hw/9pfs: Open and create files
hw/9pfs: File system helper process for qemu 9p proxy FS
hw/9pfs: Add new proxy filesystem driver
hw/9pfs: Add validation to {un}marshal code
hw/9pfs: Move pdu_marshal/unmarshal code to a seperate file
hw/9pfs: Move opt validation to FsDriver callback
* kraxel/usb.33:
usb-ohci: td.cbp incorrectly updated near page end
usb-host: properly release port on unplug & exit
usb-storage: cancel I/O on reset
Fix parse of usb device description with multiple configurations
The current code that updates the cbp value after a transfer looks like this:
td.cbp += ret;
if ((td.cbp & 0xfff) + ret > 0xfff) {
<handle page overflow>
because the 'ret' value is effectively added twice the check may fire too early
when the overflow hasn't happened yet.
Below is one of the possible changes that correct the behavior:
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When resetting the usb-storage device we'll have to carefully cancel
and clear any requests which might be in flight, otherwise we'll confuse
the state machine.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* pmaydell/arm-devs.for-upstream:
add L2x0/PL310 cache controller device
arm: add dummy gic security registers
arm: Set frequencies for arm_timer
arm: add missing scu registers
hw/omap_gpmc: Fix region map/unmap when configuring prefetch engine
hw/omap1.c: Drop unused includes
hw/omap1.c: Separate dpll_ctl from omap_mpu_state
hw/omap1.c: Separate PWT from omap_mpu_state
hw/omap1.c: Separate PWL from omap_mpu_state
hw/omap1.c: omap_mpuio_init() need not be public
hw/pl110.c: Add post-load hook to invalidate display
hw/pl181.c: Add save/load support
Add option to use named socket for communicating between proxy helper
and qemu proxy FS. Access to socket can be given by using command line
options -u and -g.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Add proxy getversion to get generation number
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Add interfaces to open and create files for proxy file system driver.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Provide root privilege access to QEMU 9p proxy filesystem using socket
communication.
Proxy helper is started by root user as:
~ # virtfs-proxy-helper -f|--fd <socket descriptor> -p|--path <path-to-share>
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Add new proxy filesystem driver to add root privilege to qemu process.
It needs a helper process to be started by root user.
Following command line can be used to utilize proxy filesystem driver
-virtfs proxy,id=<id>,mount_tag=<tag>,socket_fd=<socket-fd>
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Move p9 marshaling/unmarshaling code to a separate file so that
proxy filesytem driver can use these calls. Also made marshaling
code generic to accept "struct iovec" instead of V9fsPDU.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
This remove all conditional code from common code path and
make opt validation a FSDriver callback.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
This is just a dummy device for ARM L2 cache controllers, based on the
pl310. The cache type parameter can be defined by a property value
and has a meaningful default.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
[Peter Maydell: removed stray blank line at end]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement handling for the RAZ/WI gic security registers.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use qdev properties to allow board modelers to set the frequencies
for the sp804 timer. Each of the sp804's timers can have an
individual frequency. The timers default to 1MHz.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add power control register to a9mpcore
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
