Commit Graph

42 Commits

Author SHA1 Message Date
Mark Cave-Ayland
c921370b22 lsi53c895a: convert to trace-events
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20180917053229.4853-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02 19:09:13 +02:00
Mark Cave-Ayland
3cc1b9cba9 lsi53c895a: add optional external IRQ via qdev
On some early machines the on-board PCI devices IRQs are wired directly to
the interrupt controller instead of via the PCI host bridge.

Add an optional external IRQ that if wired up via qdev will replace the
in-built PCI IRQ.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-25 11:12:25 +10:00
Mark Cave-Ayland
e090a054a7 scsi: remove unused lsi53c895a_create() and lsi53c810_create() functions
Now that these functions are no longer required they can be removed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-25 11:12:25 +10:00
Mark Cave-Ayland
f74a4f3a59 scsi: add lsi53c8xx_handle_legacy_cmdline() function
This is the function that will soon be used to replace lsi53c895a_create() and
lsi53c810_create().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-25 11:12:25 +10:00
George Kennedy
966a09fac1 lsi_scsi: add support for PPR Extended Message
The LSI 53c895a code does not handle the PPR Extended Message. Add
support to handle PPR Extended Message like SDTR and WDTR are handled.
That is, to skip past the message bytes and ignore the message.

Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Thomas Huth
b891538e81 hw/ppc/prep: Fix implicit creation of "-drive if=scsi" devices
The global hack for creating SCSI devices has recently been removed,
but this apparently broke SCSI devices on some boards that were not
ready for this change yet. For the 40p machine you now get:

$ ppc64-softmmu/qemu-system-ppc64 -M 40p -cdrom x.iso
qemu-system-ppc64: -cdrom x.iso: machine type does not support if=scsi,bus=0,unit=2

Fix it by providing a lsi53c810_create() function that takes care
of calling scsi_bus_legacy_handle_cmdline() after creating the
corresponding SCSI controller.

Fixes: 1454509726
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-03-18 18:27:23 +11:00
Thomas Huth
1454509726 scsi: Remove automatic creation of SCSI controllers with -drive if=scsi
Automatic creation of SCSI controllers for "-drive if=scsi" for x86
machines was quite a bad idea (see description of commit f778a82f0c
for details). This is marked as deprecated since QEMU v2.9.0, and as
far as I know, nobody complained that this is still urgently required
anymore. Time to remove this now.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1519123357-13225-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06 14:00:59 +01:00
Eduardo Habkost
fd3b02c889 pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devices
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of
TYPE_PCI_DEVICE, except:

1) The ones that already have INTERFACE_PCIE_DEVICE set:

* base-xhci
* e1000e
* nvme
* pvscsi
* vfio-pci
* virtio-pci
* vmxnet3

2) base-pci-bridge

Not all PCI bridges are Conventional PCI devices, so
INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes
that are actually Conventional PCI:

* dec-21154-p2p-bridge
* i82801b11-bridge
* pbm-bridge
* pci-bridge

The direct subtypes of base-pci-bridge not touched by this patch
are:

* xilinx-pcie-root: Already marked as PCIe-only.
* pcie-pci-bridge: Already marked as PCIe-only.
* pcie-port: all non-abstract subtypes of pcie-port are already
  marked as PCIe-only devices.

3) megasas-base

Not all megasas devices are Conventional PCI devices, so the
interface names are added to the subclasses registered by
megasas_register_types(), according to information in the
megasas_devices[] array.

"megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add
INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas".

Acked-by: Alberto Garcia <berto@igalia.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15 05:54:43 +03:00
Dr. David Alan Gilbert
44b1ff319c migration: pre_save return int
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.

Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.

Note: If you add an error exit in your pre_save you must emit
an error_report to say why.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27 11:35:59 +01:00
Mao Zhongyi
3975bb56a7 scsi/lsi53c895a: Remove unused lsi_mem_*() return value
lsi_mem_read/write() always return 0 about which their
callers actually don't care. Change the function type
to void.

Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-06-04 18:42:55 +03:00
Markus Armbruster
a64aa5785d hw: Deprecate -drive if=scsi with non-onboard HBAs
Block backends defined with "-drive if=T" with T other than "none" are
meant to be picked up by machine initialization code: a suitable
frontend gets created and wired up automatically.

Drives defined with if=scsi are also picked up by SCSI HBAs added with
-device, unlike other interface types.  Deprecate this usage, as follows.

Create the frontends for onboard HBAs in machine initialization code,
exactly like we do for if=ide and other interface types.  Change
scsi_legacy_handle_cmdline() to create a frontend only when it's still
missing, and warn that this usage is deprecated.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-3-git-send-email-armbru@redhat.com>
2017-02-21 13:17:45 +01:00
Markus Armbruster
fb8b660e17 hw/scsi: Concentrate -drive if=scsi auto-create in one place
The logic to create frontends for -drive if=scsi is in SCSI HBAs.  For
all other interface types, it's in machine initialization code.

A few machine types create the SCSI HBAs necessary for that.  That's
also not done for other interface types.

I'm going to deprecate these SCSI eccentricities.  In preparation for
that, create the frontends in main() instead of the SCSI HBAs, by
calling new function scsi_legacy_handle_cmdline() there.

Note that not all SCSI HBAs create frontends.  Take care not to change
that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-2-git-send-email-armbru@redhat.com>
Acked-By: Paolo Bonzini <pbonzini@redhat.com>
2017-02-21 13:17:45 +01:00
Hervé Poussineau
98f62e3d5d lsi: never set DMA FIFO Empty (DFE) bit in DSTAT register
53C895A datasheet says:
"This bit (DFE) is a pure status bit and will not cause an interrupt"

This bit is already auto-generated in lsi_read_reg when reading the DSTAT register.

This fixes IBM RS/6000 7020 firmware, which is:
- resetting the adapter
- enabling all interrupt sources (including DIP, ie interrupts from DSTAT)
- waiting for ISTAT0 to become 0 (including DIP=0, ie no interrupt coming from DSTAT)

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1471505489-1221-5-git-send-email-hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
2016-09-13 19:08:45 +02:00
Hervé Poussineau
a8632434c7 lsi: implement I/O memory space for Memory Move instructions
Memory Move instructions can read/write data either from PCI memory or from PCI I/O.
Implement second case.

Windows 98 now works with LSI 53C810A adapter.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1471505489-1221-4-git-send-email-hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
2016-09-13 19:08:45 +02:00
Hervé Poussineau
85a20bc420 lsi: do not exit QEMU if reading invalid register
When guest accesses invalid register, return 0xff instead of exiting.
Also add a log when reading or writing invalid registers.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1471505489-1221-3-git-send-email-hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
2016-09-13 19:08:45 +02:00
Hervé Poussineau
64eb7491d3 lsi: print register names in debug prints
Modify lsi_reg_readb function to have a single exit point. Debug print can now
contain the returned value.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1471505489-1221-2-git-send-email-hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
2016-09-13 19:08:45 +02:00
Peter Maydell
a4ab4792a7 hw/scsi: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-24-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:24 +00:00
Markus Armbruster
ae071cc851 scsi: Convert remaining PCI HBAs to realize()
These are "am53c974", "dc390", "lsi53c895a", "lsi53c810", "megasas",
"megasas-gen2".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425925048-15482-5-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-10 11:18:23 +01:00
Markus Armbruster
fa61718183 scsi: Clean up duplicated error in legacy if=scsi code
Commit a818a4b changed scsi_bus_legacy_handle_cmdline() to report
errors from scsi_bus_legacy_add_drive() with error_report() in
addition to returning them.  That's inappropriate.

Two kinds of callers:

1. realize methods (devices "esp", "virtio-scsi-device" and
   "spapr-vscsi")

   The error object gets passed up the call chain until it gets
   reported again and freed.

   Example:

   $ qemu-system-arm -M virt -S -display none \
   > -drive if=scsi,id=foo,bus=1,file=tmp.qcow2 \
   > -device nec-usb-xhci -device usb-storage,drive=foo \
   > -device virtio-scsi-pci
   qemu-system-arm: -drive if=scsi,id=foo,bus=1,file=tmp.qcow2: Property 'scsi-disk.drive' can't take value 'foo', it's in use
   qemu-system-arm: -drive if=scsi,id=foo,bus=1,file=tmp.qcow2: Setting drive property failed
   qemu-system-arm: -device virtio-scsi-pci: Setting drive property failed
   qemu-system-arm: -device virtio-scsi-pci: Device initialization failed
   qemu-system-arm: -device virtio-scsi-pci: Device 'virtio-scsi-pci' could not be initialized

   The second message in this error cascade comes from
   scsi_bus_legacy_handle_cmdline().  The error object then gets
   passed up to the qdev_init() called from
   virtio_scsi_pci_init_pci(), which reports it again.

2. init methods (devices "am53c974", "dc390", "lsi53c895a",
   "lsi53c810", "megasas", "megasas-gen2")

   init methods need to report their errors with qerror_report().
   These don't.  The inappropriate error_report() papers over the bug.

   error_report() isn't the same as qerror_report() in QMP context,
   but this can't actually happen: QMP can still only hot-plug, and
   callers call scsi_bus_legacy_handle_cmdline() only on cold-plug.
   Except for sysbus_esp_realize(), but that can't be hot-plugged at
   all, as far as I can tell.

Fix the init methods and drop the inappropriate error_report() in
scsi_bus_legacy_handle_cmdline().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425925048-15482-2-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-10 11:18:23 +01:00
Peter Lieven
6f84da3a07 hw/scsi/lsi53c895a: add support for additional diag / debug registers
Some ancient Linux kernels read from registers 0x09 and 0x3c-3f during
boot. According to the spec these registers are for diag and debug
purposes only. If they are absend qemu aborts on read.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-14 10:38:57 +01:00
Markus Armbruster
3c55fe2a13 scsi: Use g_new() & friends where that makes obvious sense
g_new(T, n) is neater than g_malloc(sizeof(T) * n).  It's also safer,
for two reasons.  One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.

This commit only touches allocations with size arguments of the form
sizeof(T).

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15 12:21:02 +01:00
Fam Zheng
a818a4b69d scsi-bus: Convert DeviceClass init to realize
Replace "init/destroy" with "realize/unrealize" in SCSIDeviceClass,
which has errp as a parameter. So all the implementations now use
error_setg instead of error_report for reporting error.

Also in scsi_bus_legacy_handle_cmdline, report the error when
initializing the if=scsi devices, before returning it, because in the
callee, error_report is changed to error_setg. And the callers don't
have the right locations (e.g. "-drive if=scsi").

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-26 13:20:44 +02:00
Paolo Bonzini
469b046ead memory: remove memory_region_destroy
The function is empty after the previous patch, so remove it.

Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-18 12:06:21 +02:00
Juan Quintela
d49805aeea savevm: Remove all the unneeded version_minimum_id_old (x86)
After previous Peter patch, they are redundant.  This way we don't
assign them except when needed.  Once there, there were lots of case
where the ".fields" indentation was wrong:

     .fields = (VMStateField []) {
and
     .fields =      (VMStateField []) {

Change all the combinations to:

     .fields = (VMStateField[]){

The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-16 04:55:26 +02:00
Anthony Liguori
b0eb759fb2 pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
 - pci master abort support by Marcel
 - pci IRQ API rework by Marcel
 - acpi generation support by myself
 
 Everything has gone through several revisions, latest versions have been on
 list for a while without any more comments, tested by several
 people.
 
 Please pull for 1.7.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
 X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
 34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
 rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
 /iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
 2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
 =CVfs
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pci, pc, acpi fixes, enhancements

This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself

Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.

Please pull for 1.7.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

* mst/tags/for_anthony: (39 commits)
  ssdt-proc: update generated file
  ssdt: fix PBLK length
  i386: ACPI table generation code from seabios
  pc: use new api to add builtin tables
  acpi: add interface to access user-installed tables
  hpet: add API to find it
  pvpanic: add API to access io port
  ich9: APIs for pc guest info
  piix: APIs for pc guest info
  acpi/piix: add macros for acpi property names
  i386: define pc guest info
  loader: allow adding ROMs in done callbacks
  i386: add bios linker/loader
  loader: use file path size from fw_cfg.h
  acpi: ssdt pcihp: updat generated file
  acpi: pre-compiled ASL files
  acpi: add rules to compile ASL source
  i386: add ACPI table files from seabios
  q35: expose mmcfg size as a property
  q35: use macro for MCFG property name
  ...

Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-31 16:58:32 +01:00
Marcel Apfelbaum
9e64f8a3fc hw: set interrupts using pci irq wrappers
pci_set_irq and the other pci irq wrappers use
PCI_INTERRUPT_PIN config register to compute device
INTx pin to assert/deassert.

An irq is allocated using pci_allocate_irq wrapper
only if is needed by non pci devices.

Removed irq related fields from state if not used anymore.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14 17:11:45 +03:00
Hervé Poussineau
ceae18bd74 lsi: add 53C810 variant
Currently, treat it exactly as a 53C895A.
53C895A is a 53C810 with more capabilities, so this should work.

However, this lets us test different code paths on Linux, which
don't use lastest features if it detect a 810, or on some OSes
which only support 810 and not 895A (like very old Windows NT
versions).

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-16 12:42:40 +02:00
Hervé Poussineau
689f5ff437 lsi: remove todo
LSI emulation has been tested with Linux on PPC platform.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-16 12:42:35 +02:00
Hervé Poussineau
0903c35dde lsi: ignore write accesses to CTEST0 registers
53C895A datasheet says that this register is read/write, and that the value
returned on read access is dependant of DMA FIFO state. However, nothing is
said for written value.

53C810A datasheet gives more insight about this register:
"This was a general purpose read/write register in previous SYM53C8XX
family chips. Although it is still a read/write register, Symbios reserves
the right to use these bits for future 53C8XX family enhancements."

This prevents going to the default case, which prints an error message.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-16 12:42:25 +02:00
Hervé Poussineau
c7ac9f403a lsi: check ssid versus sdid only if ssid is valid
This prevents some (invalid) error messages on console.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-16 12:42:18 +02:00
Hervé Poussineau
16b8ed1d09 lsi: use constant name instead of its value
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-16 12:41:35 +02:00
Peter Maydell
57ffcc4c83 hw/scsi/lsi53c895a: Use deposit32 rather than handcoded shift/mask
Use deposit32() rather than handcoded shifts/masks to update the
scratch registers. This is cleaner and incidentally avoids a clang
sanitizer complaint ("runtime error: left shift of 255 by 24 places
cannot be represented in type 'int'").

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 08:46:21 +02:00
Peter Maydell
927941059b hw/scsi/lsi53c895a: Use sextract32 for sign-extension
Use sextract32() for doing sign-extension rather than rolling
our own implementation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 08:46:21 +02:00
Andreas Färber
b1187b51ff scsi: Pass size to scsi_bus_new()
To be passed to qbus_create_inplace().

Use DEVICE() casts instead of direct parent field access.

Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 20:14:39 +02:00
Marcel Apfelbaum
125ee0ed9c devices: Associate devices to their logical category
The category will be used to sort the devices displayed in
the command line help.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:09 -05:00
Andreas Färber
caad4eb345 scsi: Improve error propagation for scsi_bus_legacy_handle_cmdline()
Let scsi_bus_legacy_add_drive() and scsi_bus_legacy_handle_cmdline()
return an Error**. Prepare qdev initfns for QOM realize error model.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:35 +02:00
Andreas Färber
725eec7043 scsi/lsi53c895a: QOM parent field cleanup
Replace direct uses of LSIState::dev with QOM casts and rename it to
parent_obj.

Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:33 +02:00
Peter Crosthwaite
71186c867c scsi/lsi53c895a: QOM Upcast Sweep
Define and use standard QOM cast macro. Remove usages of DO_UPCAST()
and direct -> style upcasting.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:33 +02:00
Paolo Bonzini
2977673992 hw/s*: pass owner to memory_region_init* functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:48 +02:00
Paolo Bonzini
2c9b15cab1 memory: add owner argument to initialization functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:44 +02:00
KONRAD Frederic
11fc853c4c scsi: add bus_name parameter to scsi_bus_new.
This adds the possibility to create a scsi-bus with a specified name.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-03 12:05:15 -05:00
Paolo Bonzini
49ab747f66 hw: move target-independent files to subdirectories
This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:12 +02:00