Commit Graph

84317 Commits

Author SHA1 Message Date
Stefan Hajnoczi
a3fdbbc7f2 virtiofsd: prevent opening of special files (CVE-2020-35517)
A well-behaved FUSE client does not attempt to open special files with
FUSE_OPEN because they are handled on the client side (e.g. device nodes
are handled by client-side device drivers).

The check to prevent virtiofsd from opening special files is missing in
a few cases, most notably FUSE_OPEN. A malicious client can cause
virtiofsd to open a device node, potentially allowing the guest to
escape. This can be exploited by a modified guest device driver. It is
not exploitable from guest userspace since the guest kernel will handle
special files inside the guest instead of sending FUSE requests.

This patch fixes this issue by introducing the lo_inode_open() function
to check the file type before opening it. This is a short-term solution
because it does not prevent a compromised virtiofsd process from opening
device nodes on the host.

Restructure lo_create() to try O_CREAT | O_EXCL first. Note that O_CREAT
| O_EXCL does not follow symlinks, so O_NOFOLLOW masking is not
necessary here. If the file exists and the user did not specify O_EXCL,
open it via lo_do_open().

Reported-by: Alex Xu <alex@alxu.ca>
Fixes: CVE-2020-35517
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210204150208.367837-4-stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-04 17:34:55 +00:00
Stefan Hajnoczi
22d2ece71e virtiofsd: optionally return inode pointer from lo_do_lookup()
lo_do_lookup() finds an existing inode or allocates a new one. It
increments nlookup so that the inode stays alive until the client
releases it.

Existing callers don't need the struct lo_inode so the function doesn't
return it. Extend the function to optionally return the inode. The next
commit will need it.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210204150208.367837-3-stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-04 17:34:35 +00:00
Stefan Hajnoczi
8afaaee976 virtiofsd: extract lo_do_open() from lo_open()
Both lo_open() and lo_create() have similar code to open a file. Extract
a common lo_do_open() function from lo_open() that will be used by
lo_create() in a later commit.

Since lo_do_open() does not otherwise need fuse_req_t req, convert
lo_add_fd_mapping() to use struct lo_data *lo instead.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210204150208.367837-2-stefanha@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-04 17:32:53 +00:00
Peter Maydell
1ba089f225 QMP patches patches for 2021-02-04
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmAb5tsSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTQMsQAJSlE7ns788RRhPH79kPh9yTFp8/DCWD
 vzNesSCMVp3o7a9DBPf2U2+oxHvF5HsLJG+2eqftouqlT4DWUtfYsBFPCsaHyPry
 KCAvrb3smP4GjedI5xpseyLKeW/c5SmNdwqahAD8ma/hAtJnoTBblphne88jYxj9
 Q2l/dUzQuIgPy+jZ2DjxQYam9Vu2l3svNLvMGMe5L6/TAcSoNJV3jJ14Wz7GjoL2
 If2LaHsvStFgMAniL16kv4OGd5c4jOy1QFdLGQQAbxavJsHQPhXGlq7xYRudXcdX
 vn2HH6WQHCfwFfxkPAqOgund3Bf/LacODD9+oNUhhWgeZUiZZfVGvHjmODp2gzHa
 b7m3YogIYHdr8taYemwEzuuhOR9I1gE/v4UvTokd3eXRY6HhkjTpwWjV06Codrhq
 DKAPcjRZ1Q4XZVWAURZBz7icGXc15EuuneC6ygIZDrR1Ez73xfJ82WUscNx6MujX
 8pOPgNmQtVCRqMFRlfvZl1cVCu9Qh/1pkeDDWjR80OxvNB4iYQKfvB1GLxZJL3Vx
 zsH8oVajd+8sXdUyUA1JTM5r7b9/6TJOlktHhZ9F3TDDVbwhmcBPgTWvRa139SVf
 SUkAMZjBFx/lsuuR8S3aOG+NftYQZs3TjPqWBklpXe1nEwOxjBipPDAZMq5xccVf
 DVrE5Ay2/1T0
 =l1y4
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qmp-2021-02-04' into staging

QMP patches patches for 2021-02-04

# gpg: Signature made Thu 04 Feb 2021 12:21:47 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qmp-2021-02-04:
  qmp: Resume OOB-enabled monitor before processing the request
  qmp: Add more tracepoints
  qmp: Fix up comments after commit 9ce44e2ce2
  docs/interop/qmp-spec: Document the request queue limit
  qobject: braces {} are necessary for all arms of this statement
  qobject: spaces required around that operators
  qobject: code indent should never use tabs
  qobject: open brace '{' following struct go on the same line
  monitor/qmp-cmds.c: Don't include ui/vnc.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-04 14:15:35 +00:00
Markus Armbruster
88daf0996c qmp: Resume OOB-enabled monitor before processing the request
monitor_qmp_dispatcher_co() needs to resume the monitor if
handle_qmp_command() suspended it.  Two cases:

1. OOB enabled: suspended if mon->qmp_requests has no more space

2. OOB disabled: suspended always

We resume only after we processed the request.  Which can take a long
time.

Resume the monitor right when the queue has space to keep the monitor
available for out-of-band commands even in this corner case.

Leave the "OOB disabled" case alone.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210201161504.1976989-4-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
[Trailing whitespace tidied up]
2021-02-04 13:20:29 +01:00
Markus Armbruster
f680405f45 qmp: Add more tracepoints
Add tracepoints for in-band request enqueue and dequeue, processing of
queued in-band errors, and responses.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210201161504.1976989-3-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2021-02-04 13:20:29 +01:00
Markus Armbruster
395a95080a qmp: Fix up comments after commit 9ce44e2ce2
Commit 9ce44e2ce2 "qmp: Move dispatcher to a coroutine" replaced
monitor_qmp_bh_dispatcher() by monitor_qmp_dispatcher_co(), but
neglected to update comments.  Do that now.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210201161504.1976989-2-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2021-02-04 13:20:29 +01:00
Markus Armbruster
781386afd2 docs/interop/qmp-spec: Document the request queue limit
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210127144734.2367693-1-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2021-02-04 13:20:29 +01:00
Zhang Han
1841f0112c qobject: braces {} are necessary for all arms of this statement
Add braces {} for arms of if/for statement

Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-Id: <20201228071129.24563-5-zhanghan64@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-02-04 13:20:29 +01:00
Zhang Han
f3d71c6e8d qobject: spaces required around that operators
Add spaces around operators.

Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-Id: <20201228071129.24563-4-zhanghan64@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-02-04 13:20:29 +01:00
Zhang Han
be08fb1897 qobject: code indent should never use tabs
Transfer tabs to spaces.

Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-Id: <20201228071129.24563-3-zhanghan64@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-02-04 13:20:29 +01:00
Zhang Han
5086c9973a qobject: open brace '{' following struct go on the same line
Put open brace '{' on the same line of struct.

Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-Id: <20201228071129.24563-2-zhanghan64@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-02-04 13:20:28 +01:00
Peter Maydell
fb246f0590 monitor/qmp-cmds.c: Don't include ui/vnc.h
The qmp-cmds.c file currently includes ui/vnc.h, which (being located
in the ui/ directory rather than include) is really supposed to be
for use only by the ui subsystem.  In fact the function prototypes we
need (vnc_display_password(), etc) are all declared in
include/ui/console.h, so we can switch to including that instead.

(ui/vnc.h includes include/ui/console.h, so this change strictly
reduces the quantity of headers qmp-cmds.c pulls in.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210104161200.15068-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-02-04 13:20:28 +01:00
Peter Maydell
db754f8cca TCG backend constraints cleanup
-----BEGIN PGP SIGNATURE-----
 
 iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmAZ2UcdHHJpY2hhcmQu
 aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/2lggAi8Es/LyFve8gHcIf
 A18SuZ46SqDrUYFHUZNWYxbsoIlLGdDTWYxGJHN90Zeo7Gjzhm2zA3UOEP5E+vnF
 bDNZAMCiQqo4imAZMMS6LAebTG+D3COJVQ6HBiGoIccgGIPXwu0GCqObnXinRcP+
 EA7WQcxujEbELIIKIVpuoC5QV949MSA4npGrfJyX0AaEtu6womPQxaPmF0xqqwJP
 HDxH2l9D9oqWdrFOo/TPyma9VXLTaMvxNXPNdnhPwmjwh1139TenZW1lElyMKPYD
 KfvVz2v808kC2WShZFAi/7Gl3+f24IqMBNIGuethP9APwcRgV8zTCeAlZTo2mdND
 6ohENA==
 =pliz
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210202' into staging

TCG backend constraints cleanup

# gpg: Signature made Tue 02 Feb 2021 22:59:19 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20210202: (24 commits)
  tcg: Remove TCG_TARGET_CON_SET_H
  tcg/tci: Split out constraint sets to tcg-target-con-set.h
  tcg/sparc: Split out constraint sets to tcg-target-con-set.h
  tcg/s390: Split out constraint sets to tcg-target-con-set.h
  tcg/riscv: Split out constraint sets to tcg-target-con-set.h
  tcg/ppc: Split out constraint sets to tcg-target-con-set.h
  tcg/mips: Split out constraint sets to tcg-target-con-set.h
  tcg/arm: Split out constraint sets to tcg-target-con-set.h
  tcg/aarch64: Split out constraint sets to tcg-target-con-set.h
  tcg/i386: Split out constraint sets to tcg-target-con-set.h
  tcg: Remove TCG_TARGET_CON_STR_H
  tcg/sparc: Split out target constraints to tcg-target-con-str.h
  tcg/s390: Split out target constraints to tcg-target-con-str.h
  tcg/riscv: Split out target constraints to tcg-target-con-str.h
  tcg/mips: Split out target constraints to tcg-target-con-str.h
  tcg/tci: Split out target constraints to tcg-target-con-str.h
  tcg/ppc: Split out target constraints to tcg-target-con-str.h
  tcg/aarch64: Split out target constraints to tcg-target-con-str.h
  tcg/arm: Split out target constraints to tcg-target-con-str.h
  tcg/i386: Split out target constraints to tcg-target-con-str.h
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-03 19:35:57 +00:00
Peter Maydell
1ed9228f63 nbd patches for 2021-02-02
- more cleanup from iotest python conversion
 - progress towards consistent use of signed 64-bit types through block layer
 - fix some crashes related to NBD reconnect
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmAasREACgkQp6FrSiUn
 Q2q0bAgAqkkrQtMhTcQ6cZenLhBc7qIojOybnOnO8hXb7SpndHjE9f9OF0f0+OOm
 9vk24KyohvCFc7IwMHA/lccvHYH4Ftb8VPgYEs+U+iCxzdyM8M1goy8tbOp82Fgg
 8ahxRbBP4VTkBUiXNcCxO2KbBQL2m+YkLKvfbw+XN0KbxER6hoikfNsSty97/3su
 ZKtfEqBPH7Tl7kJz0JBfGTpCSPa6cXFzIwxK+m8pq7IKeNrICg1Uu0VR49QfTWlh
 2ptIxvKx+QkxLV+QoW7m/fqXFaIFye0tQAwTr/5b3/jBtAkgg8Yznn0TMgiqwXMr
 SuxbUpjNWqBtjjhwavSje020VhrD2w==
 =7eUe
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-02-02-v2' into staging

nbd patches for 2021-02-02

- more cleanup from iotest python conversion
- progress towards consistent use of signed 64-bit types through block layer
- fix some crashes related to NBD reconnect

# gpg: Signature made Wed 03 Feb 2021 14:20:01 GMT
# gpg:                using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg:                 aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2021-02-02-v2:
  nbd: make nbd_read* return -EIO on error
  block/nbd: only enter connection coroutine if it's present
  block/nbd: only detach existing iochannel from aio_context
  block/io: use int64_t bytes in copy_range
  block/io: support int64_t bytes in read/write wrappers
  block/io: support int64_t bytes in bdrv_co_p{read,write}v_part()
  block/io: support int64_t bytes in bdrv_aligned_preadv()
  block/io: support int64_t bytes in bdrv_co_do_copy_on_readv()
  block/io: support int64_t bytes in bdrv_aligned_pwritev()
  block/io: support int64_t bytes in bdrv_co_do_pwrite_zeroes()
  block/io: use int64_t bytes in driver wrappers
  block: use int64_t as bytes type in tracked requests
  block/io: improve bdrv_check_request: check qiov too
  block/throttle-groups: throttle_group_co_io_limits_intercept(): 64bit bytes
  block/io: bdrv_pad_request(): support qemu_iovec_init_extended failure
  block/io: refactor bdrv_pad_request(): move bdrv_pad_request() up
  block: fix theoretical overflow in bdrv_init_padding()
  util/iov: make qemu_iovec_init_extended() honest
  block: refactor bdrv_check_request: add errp
  iotests: Fix expected whitespace for 185

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-03 14:52:12 +00:00
Roman Kagan
5082fc82a6 nbd: make nbd_read* return -EIO on error
NBD reconnect logic considers the error code from the functions that
read NBD messages to tell if reconnect should be attempted or not: it is
attempted on -EIO, otherwise the client transitions to NBD_CLIENT_QUIT
state (see nbd_channel_error).  This error code is propagated from the
primitives like nbd_read.

The problem, however, is that nbd_read itself turns every error into -1
rather than -EIO.  As a result, if the NBD server happens to die while
sending the message, the client in QEMU receives less data than it
expects, considers it as a fatal error, and wouldn't attempt
reestablishing the connection.

Fix it by turning every negative return from qio_channel_read_all into
-EIO returned from nbd_read.  Apparently that was the original behavior,
but got broken later.  Also adjust nbd_readXX to follow.

Fixes: e6798f06a6 ("nbd: generalize usage of nbd_read")
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210129073859.683063-4-rvkagan@yandex-team.ru>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:17:12 -06:00
Roman Kagan
ddde5ee769 block/nbd: only enter connection coroutine if it's present
When an NBD block driver state is moved from one aio_context to another
(e.g. when doing a drain in a migration thread),
nbd_client_attach_aio_context_bh is executed that enters the connection
coroutine.

However, the assumption that ->connection_co is always present here
appears incorrect: the connection may have encountered an error other
than -EIO in the underlying transport, and thus may have decided to quit
rather than keep trying to reconnect, and therefore it may have
terminated the connection coroutine.  As a result an attempt to reassign
the client in this state (NBD_CLIENT_QUIT) to a different aio_context
leads to a null pointer dereference:

  #0  qio_channel_detach_aio_context (ioc=0x0)
      at /build/qemu-gYtjVn/qemu-5.0.1/io/channel.c:452
  #1  0x0000562a242824b3 in bdrv_detach_aio_context (bs=0x562a268d6a00)
      at /build/qemu-gYtjVn/qemu-5.0.1/block.c:6151
  #2  bdrv_set_aio_context_ignore (bs=bs@entry=0x562a268d6a00,
      new_context=new_context@entry=0x562a260c9580,
      ignore=ignore@entry=0x7feeadc9b780)
      at /build/qemu-gYtjVn/qemu-5.0.1/block.c:6230
  #3  0x0000562a24282969 in bdrv_child_try_set_aio_context
      (bs=bs@entry=0x562a268d6a00, ctx=0x562a260c9580,
      ignore_child=<optimized out>, errp=<optimized out>)
      at /build/qemu-gYtjVn/qemu-5.0.1/block.c:6332
  #4  0x0000562a242bb7db in blk_do_set_aio_context (blk=0x562a2735d0d0,
      new_context=0x562a260c9580,
      update_root_node=update_root_node@entry=true, errp=errp@entry=0x0)
      at /build/qemu-gYtjVn/qemu-5.0.1/block/block-backend.c:1989
  #5  0x0000562a242be0bd in blk_set_aio_context (blk=<optimized out>,
      new_context=<optimized out>, errp=errp@entry=0x0)
      at /build/qemu-gYtjVn/qemu-5.0.1/block/block-backend.c:2010
  #6  0x0000562a23fbd953 in virtio_blk_data_plane_stop (vdev=<optimized
      out>)
      at /build/qemu-gYtjVn/qemu-5.0.1/hw/block/dataplane/virtio-blk.c:292
  #7  0x0000562a241fc7bf in virtio_bus_stop_ioeventfd (bus=0x562a260dbf08)
      at /build/qemu-gYtjVn/qemu-5.0.1/hw/virtio/virtio-bus.c:245
  #8  0x0000562a23fefb2e in virtio_vmstate_change (opaque=0x562a260dbf90,
      running=0, state=<optimized out>)
      at /build/qemu-gYtjVn/qemu-5.0.1/hw/virtio/virtio.c:3220
  #9  0x0000562a2402ebfd in vm_state_notify (running=running@entry=0,
      state=state@entry=RUN_STATE_FINISH_MIGRATE)
      at /build/qemu-gYtjVn/qemu-5.0.1/softmmu/vl.c:1275
  #10 0x0000562a23f7bc02 in do_vm_stop (state=RUN_STATE_FINISH_MIGRATE,
      send_stop=<optimized out>)
      at /build/qemu-gYtjVn/qemu-5.0.1/cpus.c:1032
  #11 0x0000562a24209765 in migration_completion (s=0x562a260e83a0)
      at /build/qemu-gYtjVn/qemu-5.0.1/migration/migration.c:2914
  #12 migration_iteration_run (s=0x562a260e83a0)
      at /build/qemu-gYtjVn/qemu-5.0.1/migration/migration.c:3275
  #13 migration_thread (opaque=opaque@entry=0x562a260e83a0)
      at /build/qemu-gYtjVn/qemu-5.0.1/migration/migration.c:3439
  #14 0x0000562a2435ca96 in qemu_thread_start (args=<optimized out>)
      at /build/qemu-gYtjVn/qemu-5.0.1/util/qemu-thread-posix.c:519
  #15 0x00007feed31466ba in start_thread (arg=0x7feeadc9c700)
      at pthread_create.c:333
  #16 0x00007feed2e7c41d in __GI___sysctl (name=0x0, nlen=608471908,
      oldval=0x562a2452b138, oldlenp=0x0, newval=0x562a2452c5e0
      <__func__.28102>, newlen=0)
      at ../sysdeps/unix/sysv/linux/sysctl.c:30
  #17 0x0000000000000000 in ?? ()

Fix it by checking that the connection coroutine is non-null before
trying to enter it.  If it is null, no entering is needed, as the
connection is probably going down anyway.

Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210129073859.683063-3-rvkagan@yandex-team.ru>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:17:12 -06:00
Roman Kagan
3b5e4db673 block/nbd: only detach existing iochannel from aio_context
When the reconnect in NBD client is in progress, the iochannel used for
NBD connection doesn't exist.  Therefore an attempt to detach it from
the aio_context of the parent BlockDriverState results in a NULL pointer
dereference.

The problem is triggerable, in particular, when an outgoing migration is
about to finish, and stopping the dataplane tries to move the
BlockDriverState from the iothread aio_context to the main loop.  If the
NBD connection is lost before this point, and the NBD client has entered
the reconnect procedure, QEMU crashes:

  #0  qemu_aio_coroutine_enter (ctx=0x5618056c7580, co=0x0)
      at /build/qemu-6MF7tq/qemu-5.0.1/util/qemu-coroutine.c:109
  #1  0x00005618034b1b68 in nbd_client_attach_aio_context_bh (
      opaque=0x561805ed4c00) at /build/qemu-6MF7tq/qemu-5.0.1/block/nbd.c:164
  #2  0x000056180353116b in aio_wait_bh (opaque=0x7f60e1e63700)
      at /build/qemu-6MF7tq/qemu-5.0.1/util/aio-wait.c:55
  #3  0x0000561803530633 in aio_bh_call (bh=0x7f60d40a7e80)
      at /build/qemu-6MF7tq/qemu-5.0.1/util/async.c:136
  #4  aio_bh_poll (ctx=ctx@entry=0x5618056c7580)
      at /build/qemu-6MF7tq/qemu-5.0.1/util/async.c:164
  #5  0x0000561803533e5a in aio_poll (ctx=ctx@entry=0x5618056c7580,
      blocking=blocking@entry=true)
      at /build/qemu-6MF7tq/qemu-5.0.1/util/aio-posix.c:650
  #6  0x000056180353128d in aio_wait_bh_oneshot (ctx=0x5618056c7580,
      cb=<optimized out>, opaque=<optimized out>)
      at /build/qemu-6MF7tq/qemu-5.0.1/util/aio-wait.c:71
  #7  0x000056180345c50a in bdrv_attach_aio_context (new_context=0x5618056c7580,
      bs=0x561805ed4c00) at /build/qemu-6MF7tq/qemu-5.0.1/block.c:6172
  #8  bdrv_set_aio_context_ignore (bs=bs@entry=0x561805ed4c00,
      new_context=new_context@entry=0x5618056c7580,
      ignore=ignore@entry=0x7f60e1e63780)
      at /build/qemu-6MF7tq/qemu-5.0.1/block.c:6237
  #9  0x000056180345c969 in bdrv_child_try_set_aio_context (
      bs=bs@entry=0x561805ed4c00, ctx=0x5618056c7580,
      ignore_child=<optimized out>, errp=<optimized out>)
      at /build/qemu-6MF7tq/qemu-5.0.1/block.c:6332
  #10 0x00005618034957db in blk_do_set_aio_context (blk=0x56180695b3f0,
      new_context=0x5618056c7580, update_root_node=update_root_node@entry=true,
      errp=errp@entry=0x0)
      at /build/qemu-6MF7tq/qemu-5.0.1/block/block-backend.c:1989
  #11 0x00005618034980bd in blk_set_aio_context (blk=<optimized out>,
      new_context=<optimized out>, errp=errp@entry=0x0)
      at /build/qemu-6MF7tq/qemu-5.0.1/block/block-backend.c:2010
  #12 0x0000561803197953 in virtio_blk_data_plane_stop (vdev=<optimized out>)
      at /build/qemu-6MF7tq/qemu-5.0.1/hw/block/dataplane/virtio-blk.c:292
  #13 0x00005618033d67bf in virtio_bus_stop_ioeventfd (bus=0x5618056d9f08)
      at /build/qemu-6MF7tq/qemu-5.0.1/hw/virtio/virtio-bus.c:245
  #14 0x00005618031c9b2e in virtio_vmstate_change (opaque=0x5618056d9f90,
      running=0, state=<optimized out>)
      at /build/qemu-6MF7tq/qemu-5.0.1/hw/virtio/virtio.c:3220
  #15 0x0000561803208bfd in vm_state_notify (running=running@entry=0,
      state=state@entry=RUN_STATE_FINISH_MIGRATE)
      at /build/qemu-6MF7tq/qemu-5.0.1/softmmu/vl.c:1275
  #16 0x0000561803155c02 in do_vm_stop (state=RUN_STATE_FINISH_MIGRATE,
      send_stop=<optimized out>) at /build/qemu-6MF7tq/qemu-5.0.1/cpus.c:1032
  #17 0x00005618033e3765 in migration_completion (s=0x5618056e6960)
      at /build/qemu-6MF7tq/qemu-5.0.1/migration/migration.c:2914
  #18 migration_iteration_run (s=0x5618056e6960)
      at /build/qemu-6MF7tq/qemu-5.0.1/migration/migration.c:3275
  #19 migration_thread (opaque=opaque@entry=0x5618056e6960)
      at /build/qemu-6MF7tq/qemu-5.0.1/migration/migration.c:3439
  #20 0x0000561803536ad6 in qemu_thread_start (args=<optimized out>)
      at /build/qemu-6MF7tq/qemu-5.0.1/util/qemu-thread-posix.c:519
  #21 0x00007f61085d06ba in start_thread ()
     from /lib/x86_64-linux-gnu/libpthread.so.0
  #22 0x00007f610830641d in sysctl () from /lib/x86_64-linux-gnu/libc.so.6
  #23 0x0000000000000000 in ?? ()

Fix it by checking that the iochannel is non-null before trying to
detach it from the aio_context.  If it is null, no detaching is needed,
and it will get reattached in the proper aio_context once the connection
is reestablished.

Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210129073859.683063-2-rvkagan@yandex-team.ru>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:17:12 -06:00
Vladimir Sementsov-Ogievskiy
a5215b8fdf block/io: use int64_t bytes in copy_range
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, convert now copy_range parameters which are already 64bit to signed
type.

It's safe as we don't work with requests overflowing BDRV_MAX_LENGTH
(which is less than INT64_MAX), and do check the requests in
bdrv_co_copy_range_internal() (by bdrv_check_request32(), which calls
bdrv_check_request()).

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-17-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:17:12 -06:00
Vladimir Sementsov-Ogievskiy
e9e52efdc5 block/io: support int64_t bytes in read/write wrappers
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

Now, since bdrv_co_preadv_part() and bdrv_co_pwritev_part() have been
updated, update all their wrappers.

For all of them type of 'bytes' is widening, so callers are safe. We
have update request_fn in blkverify.c simultaneously. Still it's just a
pointer to one of bdrv_co_pwritev() or bdrv_co_preadv(), and type is
widening for callers of the request_fn anyway.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-16-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:17:12 -06:00
Vladimir Sementsov-Ogievskiy
37e9403ea8 block/io: support int64_t bytes in bdrv_co_p{read,write}v_part()
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, prepare bdrv_co_preadv_part() and bdrv_co_pwritev_part() and their
remaining dependencies now.

bdrv_pad_request() is updated simultaneously, as pointer to bytes passed
to it both from bdrv_co_pwritev_part() and bdrv_co_preadv_part().

So, all callers of bdrv_pad_request() are updated to pass 64bit bytes.
bdrv_pad_request() is already good for 64bit requests, add
corresponding assertion.

Look at bdrv_co_preadv_part() and bdrv_co_pwritev_part().
Type is widening, so callers are safe. Let's look inside the functions.

In bdrv_co_preadv_part() and bdrv_aligned_pwritev() we only pass bytes
to other already int64_t interfaces (and some obviously safe
calculations), it's OK.

In bdrv_co_do_zero_pwritev() aligned_bytes may become large now, still
it's passed to bdrv_aligned_pwritev which supports int64_t bytes.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-15-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:17:11 -06:00
Vladimir Sementsov-Ogievskiy
8b0c5d7659 block/io: support int64_t bytes in bdrv_aligned_preadv()
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, prepare bdrv_aligned_preadv() now.

Make the bytes variable in bdrv_padding_rmw_read() int64_t, as it is
only used for pass-through to bdrv_aligned_preadv().

All bdrv_aligned_preadv() callers are safe as type is widening. Let's
look inside:

 - add a new-style assertion that request is good.
 - callees bdrv_is_allocated(), bdrv_co_do_copy_on_readv() supports
   int64_t bytes
 - conversion of bytes_remaining is OK, as we never have requests
   overflowing BDRV_MAX_LENGTH
 - looping through bytes_remaining is ok, num is updated to int64_t
   - for bdrv_driver_preadv we have same limit of max_transfer
   - qemu_iovec_memset is OK, as bytes+qiov_offset should not overflow
     qiov->size anyway (thanks to bdrv_check_qiov_request())

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-14-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:17:11 -06:00
Vladimir Sementsov-Ogievskiy
9df5afbdd1 block/io: support int64_t bytes in bdrv_co_do_copy_on_readv()
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, prepare bdrv_co_do_copy_on_readv() now.

'bytes' type widening, so callers are safe. Look at the function
itself:

bytes, skip_bytes and progress become int64_t.

bdrv_round_to_clusters() is OK, cluster_bytes now may be large.
trace_bdrv_co_do_copy_on_readv() is OK

looping through cluster_bytes is still OK.

pnum is still capped to max_transfer, and to MAX_BOUNCE_BUFFER when we
are going to do COR operation. Therefor calculations in
qemu_iovec_from_buf() and bdrv_driver_preadv() should not change.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-13-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:17:11 -06:00
Vladimir Sementsov-Ogievskiy
fcfd9ade68 block/io: support int64_t bytes in bdrv_aligned_pwritev()
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, prepare bdrv_aligned_pwritev() now and convert the dependencies:
bdrv_co_write_req_prepare() and bdrv_co_write_req_finish() to signed
type bytes.

Conversion of bdrv_co_write_req_prepare() and
bdrv_co_write_req_finish() is definitely safe, as all requests in
block/io must not overflow BDRV_MAX_LENGTH. Still add assertions.

For bdrv_aligned_pwritev() 'bytes' type is widened, so callers are
safe. Let's check usage of the parameter inside the function.

Passing to bdrv_co_write_req_prepare() and bdrv_co_write_req_finish()
is OK.

Passing to qemu_iovec_* is OK after new assertion. All other callees
are already updated to int64_t.

Checking alignment is not changed, offset + bytes and qiov_offset +
bytes calculations are safe (thanks to new assertions).

max_transfer is kept to be int for now. It has a default of INT_MAX
here, and some drivers may rely on it. It's to be refactored later.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-12-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:16:03 -06:00
Vladimir Sementsov-Ogievskiy
5ae07b1410 block/io: support int64_t bytes in bdrv_co_do_pwrite_zeroes()
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, prepare bdrv_co_do_pwrite_zeroes() now.

Callers are safe, as converting int to int64_t is safe. Concentrate on
'bytes' usage in the function (thx to Eric Blake):

    compute 'int tail' via % 'int alignment' - safe
    fragmentation loop 'int num' - still fragments with a cap on
      max_transfer

    use of 'num' within the loop
    MIN(bytes, max_transfer) as well as %alignment - still works, so
         calculations in if (head) {} are safe
    clamp size by 'int max_write_zeroes' - safe
    drv->bdrv_co_pwrite_zeroes(int) - safe because of clamping
    clamp size by 'int max_transfer' - safe
    buf allocation is still clamped to max_transfer
    qemu_iovec_init_buf(size_t) - safe because of clamping
    bdrv_driver_pwritev(uint64_t) - safe

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-11-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:16:03 -06:00
Vladimir Sementsov-Ogievskiy
17abcbeee2 block/io: use int64_t bytes in driver wrappers
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, convert driver wrappers parameters which are already 64bit to
signed type.

Requests in block/io.c must never exceed BDRV_MAX_LENGTH (which is less
than INT64_MAX), which makes the conversion to signed 64bit type safe.

Add corresponding assertions.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-10-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:16:03 -06:00
Eric Blake
8024726459 block: use int64_t as bytes type in tracked requests
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

All requests in block/io must not overflow BDRV_MAX_LENGTH, all
external users of BdrvTrackedRequest already have corresponding
assertions, so we are safe. Add some assertions still.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-9-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:14:15 -06:00
Vladimir Sementsov-Ogievskiy
63f4ad1186 block/io: improve bdrv_check_request: check qiov too
Operations with qiov add more restrictions on bytes, let's cover it.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-8-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:14:00 -06:00
Vladimir Sementsov-Ogievskiy
801625e69d block/throttle-groups: throttle_group_co_io_limits_intercept(): 64bit bytes
The function is called from 64bit io handlers, and bytes is just passed
to throttle_account() which is 64bit too (unsigned though). So, let's
convert intermediate argument to 64bit too.

This patch is a first in the 64-bit-blocklayer series, so we are
generally moving to int64_t for both offset and bytes parameters on all
io paths. Main motivation is realization of 64-bit write_zeroes
operation for fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

Patch-correctness audit by Eric Blake:

  Caller has 32-bit, this patch now causes widening which is safe:
  block/block-backend.c: blk_do_preadv() passes 'unsigned int'
  block/block-backend.c: blk_do_pwritev_part() passes 'unsigned int'
  block/throttle.c: throttle_co_pwrite_zeroes() passes 'int'
  block/throttle.c: throttle_co_pdiscard() passes 'int'

  Caller has 64-bit, this patch fixes potential bug where pre-patch
  could narrow, except it's easy enough to trace that callers are still
  capped at 2G actions:
  block/throttle.c: throttle_co_preadv() passes 'uint64_t'
  block/throttle.c: throttle_co_pwritev() passes 'uint64_t'

  Implementation in question: block/throttle-groups.c
  throttle_group_co_io_limits_intercept() takes 'unsigned int bytes'
  and uses it: argument to util/throttle.c throttle_account(uint64_t)

  All safe: it patches a latent bug, and does not introduce any 64-bit
  gotchas once throttle_co_p{read,write}v are relaxed, and assuming
  throttle_account() is not buggy.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20201211183934.169161-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:14:00 -06:00
Vladimir Sementsov-Ogievskiy
98ca45494f block/io: bdrv_pad_request(): support qemu_iovec_init_extended failure
Make bdrv_pad_request() honest: return error if
qemu_iovec_init_extended() failed.

Update also bdrv_padding_destroy() to clean the structure for safety.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:14:00 -06:00
Vladimir Sementsov-Ogievskiy
f0deecff82 block/io: refactor bdrv_pad_request(): move bdrv_pad_request() up
Prepare for the following patch when bdrv_pad_request() will be able to
fail. Update the comments.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:00:52 -06:00
Vladimir Sementsov-Ogievskiy
a56ed80c42 block: fix theoretical overflow in bdrv_init_padding()
Calculation of sum may theoretically overflow, so use 64bit type and
add some good assertions.

Use int64_t constantly.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak assertion order]
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:00:33 -06:00
Vladimir Sementsov-Ogievskiy
4c002cef0e util/iov: make qemu_iovec_init_extended() honest
Actually, we can't extend the io vector in all cases. Handle possible
MAX_IOV and size_t overflows.

For now add assertion to callers (actually they rely on success anyway)
and fix them in the following patch.

Add also some additional good assertions to qemu_iovec_init_slice()
while being here.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:00:33 -06:00
Vladimir Sementsov-Ogievskiy
69b55e03f7 block: refactor bdrv_check_request: add errp
It's better to pass &error_abort than just assert that result is 0: on
crash, we'll immediately see the reason in the backtrace.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix iotest 206 fallout]
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-03 08:00:33 -06:00
Eric Blake
c930831446 iotests: Fix expected whitespace for 185
Commit f93e19fb03 adjusted various iotest whitespace discrepancies.
But another one snuck in during 61623f8215, and we missed the
semantic merge conflict at the time because 185 is not run as part of
the default 'make check'.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210202185914.614705-1-eblake@redhat.com>
[eblake: adjust commit message]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-02-03 08:00:33 -06:00
Peter Maydell
99ae0cd90d target-arm queue:
* hw/intc/arm_gic: Allow to use QTest without crashing
  * hw/char/exynos4210_uart: Fix buffer size reporting with FIFO disabled
  * hw/char/exynos4210_uart: Fix missing call to report ready for input
  * hw/arm/smmuv3: Fix addr_mask for range-based invalidation
  * hw/ssi/imx_spi: Fix various minor bugs
  * hw/intc/arm_gic: Fix interrupt ID in GICD_SGIR register
  * hw/arm: Add missing Kconfig dependencies
  * hw/arm: Display CPU type in machine description
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmAaeAQZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3tWFD/9VTSSTmGMtSLGpuVt6t07x
 zqaFvRe+xUjrunwt25yx9tu9o4txXTk6mekgAz51QSeijESVIQQUKArZjbLWxRjl
 EXZAedOCF+f+lpzdQCO/GZtsHOfcWa158qm51NlEIM3cn1NiSASs0ky3r52MjjAR
 g0NFYTiZNplq8ah/0RljhHMhnAHzUbp/IErIxknWOVKvaH45+eji7mKxUk2vaCXB
 L5HCEzGCbPCqMMi3DFcwm9nNIYRu7X0hs9nR0AXTvdXbCoDqSyD4dEpjEcK/2IFM
 4zbS4NFRD7ndjD0C502+EUFav3tfd5/UfIjNg3oquMTDQrMCvh5Y1i3II0lVVWe5
 eSfbqV2eBzJHBanf7P64fRpk9mBNduJ8BZrozICvkCJxj5y3nTofKA9hXeGaDAdy
 7sA7Uzkpb1vnnMFzYk/0t2D6BSSFiknYuDHnfMY0nRoHsuDvY5yHw9Tt181D+qST
 UyLcmS8BB227WGgQPKSsFiUu7U423BIoiD5pp8cRyAg+FojqH6BZrcVluUWng6Ru
 ZVG0349lTmZ4mgv2hZI1qqIh80o40TI6K7OerQuMkZlq+4xseZvyb6+SQHaQ/j3I
 CKBiN15y/UzE5eivG6Siq3MR2myCBCSevTxDw4s+zR9FhoRQqFKoDhPGXTR9btWo
 1mgDNUQfyWtCcdoJKb7jEg==
 =kWoi
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210203' into staging

target-arm queue:
 * hw/intc/arm_gic: Allow to use QTest without crashing
 * hw/char/exynos4210_uart: Fix buffer size reporting with FIFO disabled
 * hw/char/exynos4210_uart: Fix missing call to report ready for input
 * hw/arm/smmuv3: Fix addr_mask for range-based invalidation
 * hw/ssi/imx_spi: Fix various minor bugs
 * hw/intc/arm_gic: Fix interrupt ID in GICD_SGIR register
 * hw/arm: Add missing Kconfig dependencies
 * hw/arm: Display CPU type in machine description

# gpg: Signature made Wed 03 Feb 2021 10:16:36 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210203: (21 commits)
  hw/arm: Display CPU type in machine description
  hw/net/can: ZynqMP CAN device requires PTIMER
  hw/arm/xlnx-versal: Versal SoC requires ZynqMP peripherals
  hw/arm/xlnx-versal: Versal SoC requires ZDMA
  hw/arm/exynos4210: Add missing dependency on OR_IRQ
  hw/arm/stm32f405_soc: Add missing dependency on OR_IRQ
  hw/intc/arm_gic: Fix interrupt ID in GICD_SGIR register
  hw/ssi: imx_spi: Correct tx and rx fifo endianness
  hw/ssi: imx_spi: Correct the burst length > 32 bit transfer logic
  hw/ssi: imx_spi: Round up the burst length to be multiple of 8
  hw/ssi: imx_spi: Disable chip selects when controller is disabled
  hw/ssi: imx_spi: Rework imx_spi_write() to handle block disabled
  hw/ssi: imx_spi: Rework imx_spi_read() to handle block disabled
  hw/ssi: imx_spi: Rework imx_spi_reset() to keep CONREG register value
  hw/ssi: imx_spi: Remove pointless variable initialization
  hw/ssi: imx_spi: Remove imx_spi_update_irq() in imx_spi_reset()
  hw/ssi: imx_spi: Use a macro for number of chip selects supported
  hw/arm/smmuv3: Fix addr_mask for range-based invalidation
  hw/char/exynos4210_uart: Fix missing call to report ready for input
  hw/char/exynos4210_uart: Fix buffer size reporting with FIFO disabled
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-03 12:55:44 +00:00
Philippe Mathieu-Daudé
fd8f71b95d hw/arm: Display CPU type in machine description
Most of ARM machines display their CPU when QEMU list the available
machines (-M help). Some machines do not. Fix to unify the help
output.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210131184449.382425-7-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-03 10:15:51 +00:00
Philippe Mathieu-Daudé
e022f2a205 hw/net/can: ZynqMP CAN device requires PTIMER
Add a dependency XLNX_ZYNQMP -> PTIMER to fix:

  /usr/bin/ld:
  libcommon.fa.p/hw_net_can_xlnx-zynqmp-can.c.o: in function `xlnx_zynqmp_can_realize':
  hw/net/can/xlnx-zynqmp-can.c:1082: undefined reference to `ptimer_init'
  hw/net/can/xlnx-zynqmp-can.c:1085: undefined reference to `ptimer_transaction_begin'
  hw/net/can/xlnx-zynqmp-can.c:1087: undefined reference to `ptimer_set_freq'
  hw/net/can/xlnx-zynqmp-can.c:1088: undefined reference to `ptimer_set_limit'
  hw/net/can/xlnx-zynqmp-can.c:1089: undefined reference to `ptimer_run'
  hw/net/can/xlnx-zynqmp-can.c:1090: undefined reference to `ptimer_transaction_commit'
  libcommon.fa.p/hw_net_can_xlnx-zynqmp-can.c.o:(.data.rel+0x2c8): undefined reference to `vmstate_ptimer'

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210131184449.382425-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-03 10:15:50 +00:00
Philippe Mathieu-Daudé
1de3b49017 hw/arm/xlnx-versal: Versal SoC requires ZynqMP peripherals
The Versal SoC instantiates the TYPE_XLNX_ZYNQMP_RTC object in
versal_create_rtc()(). Select CONFIG_XLNX_ZYNQMP to fix:

  $ make check-qtest-aarch64
  ...
  Running test qtest-aarch64/qom-test
  qemu-system-aarch64: missing object type 'xlnx-zynmp.rtc'
  Broken pipe

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210131184449.382425-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-03 10:15:50 +00:00
Philippe Mathieu-Daudé
6bfaec73a1 hw/arm/xlnx-versal: Versal SoC requires ZDMA
The Versal SoC instantiates the TYPE_XLNX_ZDMA object in
versal_create_admas(). Introduce the XLNX_ZDMA configuration
and select it to fix:

  $ qemu-system-aarch64 -M xlnx-versal-virt ...
  qemu-system-aarch64: missing object type 'xlnx.zdma'

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210131184449.382425-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-03 10:15:50 +00:00
Philippe Mathieu-Daudé
5900c7a6d4 hw/arm/exynos4210: Add missing dependency on OR_IRQ
The Exynos4210 SoC uses an OR gate on the PL330 IRQ lines.

Fixes: dab15fbe2a ("hw/arm/exynos4210: Fix DMA initialization")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210131184449.382425-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-03 10:15:50 +00:00
Philippe Mathieu-Daudé
9e39983e5d hw/arm/stm32f405_soc: Add missing dependency on OR_IRQ
The STM32F405 SoC uses an OR gate on its ADC IRQs.

Fixes: 529fc5fd3e ("hw/arm: Add the STM32F4xx SoC")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210131184449.382425-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-03 10:15:50 +00:00
Peter Maydell
8360ebeb4f Machine queue, 2021-02-02
Feature:
 * nvdimm: read-only file support (Stefan Hajnoczi)
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEWjIv1avE09usz9GqKAeTb5hNxaYFAmAZp5kUHGVoYWJrb3N0
 QHJlZGhhdC5jb20ACgkQKAeTb5hNxaYSeBAAp2lr8eKwsEju6Qpmo+OGo6rG/ORM
 KWRtwwLhHfjj2iFipURAkoepOqmtD/xd7fwItdTwi6zZxzr2eNwKqdlc9T93onzX
 P1yXCNHrz0NmmDB8LbC9Bw2NwubghAYgkuWo+fWMxNU92r+ObnvEc3Otx7P7sGvb
 Lr0yFRANgbJBLw1JTB9kMcWVDhiJ8tMPO9drhUWiMjl4kOaLNyrjUpafNzaleIaO
 GRtIXWts2Waq8wIz3XgSqWDytr075v2vWfvbR4JeAQxFArFbplR3BUuDa8G4nf6O
 nB+DERSMw+fOB2f6ZSYaAqSNwCgIrtwjhkZID0EXzNr03GPuonRnKLRZXYHvlEPT
 0qLaQeeLX+RXr6vGIjPJceQ3PyPlgDMVgVAKPS6Fvx4a3vYzAKfIj6E85QDNhuUJ
 FD37bS3iHpGxMAiuw1Ju1xJdkdzpX11h3nruo8K3sFciMK0CjkfHQKwGcw4XtKE1
 U56PEp+hKmoPe3z9CT1QmlJXlAJ+3NCAAXp6yt5yFDMqU4qxD2ns9+ts/S75o3bo
 P9pTBiaSAlUyOF1a0+0tOMny/7yz+Eb+Dw4CszZ6cCErVC/wNuJXYsF3BCT2roPN
 0d5CKwA717Jh7JmxhSlGXAW4d5mSMn8RHbFnHd5ZKFiIAh4+wnKfXrD9vB+Vq4fr
 Nja+LAk7QoURKjc=
 =TJ6/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost-gl/tags/machine-next-pull-request' into staging

Machine queue, 2021-02-02

Feature:
* nvdimm: read-only file support (Stefan Hajnoczi)

# gpg: Signature made Tue 02 Feb 2021 19:27:21 GMT
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost-gl/tags/machine-next-pull-request:
  nvdimm: check -object memory-backend-file, readonly=on option
  hostmem-file: add readonly=on|off option
  memory: add readonly support to memory_region_init_ram_from_file()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-03 09:54:21 +00:00
Richard Henderson
0c823e5968 tcg: Remove TCG_TARGET_CON_SET_H
All backends have now been converted to tcg-target-con-set.h,
so we can remove the fallback code.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-02-02 12:12:43 -10:00
Richard Henderson
63b29fda4e tcg/tci: Split out constraint sets to tcg-target-con-set.h
This requires finishing the conversion to tcg_target_op_def.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-02-02 12:12:43 -10:00
Richard Henderson
0d11dc7c97 tcg/sparc: Split out constraint sets to tcg-target-con-set.h
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-02-02 12:12:43 -10:00
Richard Henderson
d1c36a9032 tcg/s390: Split out constraint sets to tcg-target-con-set.h
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-02-02 12:12:43 -10:00
Richard Henderson
665be288ac tcg/riscv: Split out constraint sets to tcg-target-con-set.h
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-02-02 12:12:43 -10:00
Richard Henderson
6893016b90 tcg/ppc: Split out constraint sets to tcg-target-con-set.h
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-02-02 12:12:43 -10:00
Richard Henderson
0263330bce tcg/mips: Split out constraint sets to tcg-target-con-set.h
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-02-02 12:12:43 -10:00