Sort .inc files along with the extension including them.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201213205132.243628-1-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When needed, the G_GNUC_CHECK_VERSION() glib macro can be used instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201210134752.780923-14-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU requires Clang or GCC, that define and support __GNUC__ extensions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201210134752.780923-13-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU requires Clang or GCC, that define and support __GNUC__ extensions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201210134752.780923-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU requires Clang or GCC, that define and support __GNUC__ extensions
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Message-Id: <20201210134752.780923-11-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU requires Clang or GCC, that define and support __GNUC__ extensions
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201210134752.780923-10-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit efc6c07 ("configure: Add a test for the minimum compiler
version"), QEMU explicitely depends on GCC >= 4.8, we could thus drop
earlier version checks. Except clang advertizes itself as GCC 4.2.1.
Since clang doesn't support gnu_printf, make that case explicitely and
drop GCC version check.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201210134752.780923-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows to get rid of a check for older GCC version (which was a bit
bogus too since it was falling back on c++ version..)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201210134752.780923-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit efc6c07 ("configure: Add a test for the minimum compiler
version"), QEMU explicitely depends on GCC >= 4.8.
(clang >= 3.4 advertizes itself as GCC >= 4.2 compatible)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201210134752.780923-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit efc6c07 ("configure: Add a test for the minimum compiler
version"), QEMU explicitely depends on GCC >= 4.8.
(clang >= 3.4 advertizes itself as GCC >= 4.2 compatible)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201210134752.780923-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit efc6c07 ("configure: Add a test for the minimum compiler
version"), QEMU explicitely depends on GCC >= 4.8.
(clang >= 3.4 advertizes itself as GCC >= 4.2 compatible and supports
__builtin_expect too)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201210134752.780923-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit efc6c070ac ("configure: Add a test for the
minimum compiler version") the minimum compiler version
required for GCC is 4.8.
We can safely remove the special case for GCC 4.6 introduced
in commit 0448f5f8b8 ("cpu-exec: Fix compiler warning
(-Werror=clobbered)").
No change for Clang as we don't know.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201210134752.780923-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit efc6c070ac ("configure: Add a test for the
minimum compiler version") the minimum compiler version
required for GCC is 4.8, which has the GCC BZ#36793 bug fixed.
We can safely remove the special case introduced in commit
a281ebc11a ("virtio: add missing mb() on notification").
With clang 3.4, __ATOMIC_RELAXED is defined, so the chunk to
remove (which is x86-specific), isn't reached either.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201210134752.780923-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
fw-path-provider.c is only consumed by qdev-fw.c, which itself
is in softmmu_ss[], so we can restrict fw-path-provider.c to
softmmu too.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201207220709.4017938-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The default configuration path /etc/qemu can be overriden with configure
options, and the generated documentation used to reflect it.
Fixes regression introduced in commit
f8aa24ea9a ("meson: sphinx-build").
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1902537
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201201183704.299697-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Silly patch extracted from the next one, which is already big enough.
Because there are already local variables named "accel", we will name
the global vl.c variable for "-M accel" accelerators instead. Rename
it already in configure_accelerators to be ready.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A QemuOptsList can be of one of two kinds: either it is pre-validated, or
it accepts any key and validation happens somewhere else (typically in
a Visitor or against a list of QOM properties). opts_accepts_any
returns true if a QemuOpts instance was created from a QemuOptsList of
the latter kind, but there is no function to do the check on a QemuOptsList.
Since this property comes from the QemuOptsList and almost all callers of
opts_accepts_any use opts->list anyway, modify the function to accept
QemuOptsList.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use strcspn to find an equal or comma value, and pass the result directly
to get_opt_name to avoid another strchr.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kernel KVM_CLEAR_DIRTY_LOG interface has align requirement on both the
start and the size of the given range of pages. We have been careful to
handle the unaligned cases when performing CLEAR on one slot. But it seems
that we forget to take the unaligned *size* case into account when
preparing bitmap for the interface, and we may end up clearing dirty status
for pages outside of [start, start + size).
If the size is unaligned, let's go through the slow path to manipulate a
temp bitmap for the interface so that we won't bother with those unaligned
bits at the end of bitmap.
I don't think this can happen in practice since the upper layer would
provide us with the alignment guarantee. I'm not sure if kvm-all could rely
on it. And this patch is mainly intended to address correctness of the
specific algorithm used inside kvm_log_clear_one_slot().
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20201208114013.875-1-yuzenghui@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is (mostly theoretical) race between removal of a scsi device and
scsi_dma_restart_bh.
It used to be easier to hit this race prior to my / Paulo's patch series
that added rcu to scsi bus device handling code, but IMHO this race
should still be possible to hit, at least in theory.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1854811
Fix it anyway with a patch that was proposed by Paulo in the above bugzilla.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201210125929.1136390-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cpu-exec tries to execute TB without caching when current
icount budget is over. But sometimes refilled budget is big
enough to try executing cached blocks.
This patch checks that instruction budget is big enough
for next block execution instead of just running cpu_exec_nocache.
It halves the number of calls of cpu_exec_nocache function
during tested OS boot scenario.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Message-Id: <160741865825.348476.7169239332367828943.stgit@pasha-ThinkPad-X280>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It has been marked as deprecated since QEMU v5.0, replaced by the
corresponding parameter of the -display option.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It has been marked as deprecated since QEMU v4.2, replaced by
the -overcommit option. Time to remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Otherwise there is a chance that new deprecated features get added
to the list of removed features at the end of the file by accident.
It's way less confusing if the removed features reside in a separate
file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-3-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The '-tb-size' option (replaced by '-accel tcg,tb-size') is
deprecated since 5.0 (commit fe17413247). Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201202112714.1223783-1-philmd@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In using the address_space_translate_internal API, address_space_cache_init
forgot one piece of advice that can be found in the code for
address_space_translate_internal:
/* MMIO registers can be expected to perform full-width accesses based only
* on their address, without considering adjacent registers that could
* decode to completely different MemoryRegions. When such registers
* exist (e.g. I/O ports 0xcf8 and 0xcf9 on most PC chipsets), MMIO
* regions overlap wildly. For this reason we cannot clamp the accesses
* here.
*
* If the length is small (as is the case for address_space_ldl/stl),
* everything works fine. If the incoming length is large, however,
* the caller really has to do the clamping through memory_access_size.
*/
address_space_cache_init is exactly one such case where "the incoming length
is large", therefore we need to clamp the resulting length---not to
memory_access_size though, since we are not doing an access yet, but to
the size of the resulting section. This ensures that subsequent accesses
to the cached MemoryRegionSection will be in range.
With this patch, the enclosed testcase notices that the used ring does
not fit into the MSI-X table and prints a "qemu-system-x86_64: Cannot map used"
error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Test the scenario where the -action panic=none parameter is used to
signal that the VM must continue executing after a guest panic
occurs.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-5-git-send-email-alejandro.j.jimenez@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current default action of pausing a guest after a panic event
is received leaves the responsibility to resume guest execution to the
management layer. The reasons for this behavior are discussed here:
https://lore.kernel.org/qemu-devel/52148F88.5000509@redhat.com/
However, in instances like the case of older guests (Linux and
Windows) using a pvpanic device but missing support for the
PVPANIC_CRASHLOADED event, and Windows guests using the hv-crash
enlightenment, it is desirable to allow the guests to continue
running after sending a PVPANIC_PANICKED event. This allows such
guests to proceed to capture a crash dump and automatically reboot
without intervention of a management layer.
Add an option to avoid stopping a VM after a panic event is received,
by passing:
-action panic=none
in the command line arguments, or during runtime by using an upcoming
QMP command.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-3-git-send-email-alejandro.j.jimenez@oracle.com>
[Do not fix panic action in the variable, instead modify -no-shutdown. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several command line options currently in use are meant to modify
the behavior of QEMU in response to certain guest events like:
-no-reboot, -no-shutdown, -watchdog-action.
These can be grouped into a single option of the form:
-action event=action
Which can be used to specify the existing options above in the
following format:
-action reboot=none|shutdown
-action shutdown=poweroff|pause
-action watchdog=reset|shutdown|poweroff|pause|debug|none|inject-nmi
This is done in preparation for adding yet another option of this
type, which modifies the QEMU behavior when a guest panic occurs.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-2-git-send-email-alejandro.j.jimenez@oracle.com>
[Use QemuOpts help support, invoke QMP command. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a QMP command to allow for the behaviors specified by the
-no-reboot and -no-shutdown command line option to be set at runtime.
The new command is named set-action and takes optional arguments, named
after an event, that provide a corresponding action to take.
Example:
-> { "execute": "set-action",
"arguments": {
"reboot": "none",
"shutdown": "poweroff",
"watchdog": "debug" } }
<- { "return": {} }
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-4-git-send-email-alejandro.j.jimenez@oracle.com>
[Split the series differently, with -action based on the QMP command. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compute the DIRTY_MEMORY_CODE bit in memory_region_get_dirty_log_mask
instead of memory_region_init_*. This makes it possible to allocate
memory backend objects at any time.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_finish_machine_init currently can only exit QEMU if it fails.
Prepare for giving it proper error propagation, and possibly for
adding a plugin_add monitor command that calls an accelerator
method.
While at it, make all errors from plugin_load look the same.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Machine options can be retrieved as properties of the machine object.
Encourage that by removing the "easy" accessor to machine options.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since NVDIMM support was introduced on pseries machine,
it ignored machine's nvdimm=on|off option and effectively
was always enabled on machines that support NVDIMM.
Later on commit
(28f5a71621 ppc/spapr_nvdimm: do not enable support with 'nvdimm=off')
makes QEMU error out in case user explicitly set 'nvdimm=off'
on CLI by peeking at machine_opts.
However that's a workaround and leaves 'nvdimms_state->is_enabled'
in inconsistent state (false) when it should be set true
by default.
Instead of using on machine_opts, set default to true for pseries
machine in initfn time. If user sets manually 'nvdimm=off'
it will overwrite default value to false and QEMU will error
as expected without need to peek into machine_opts.
That way pseries will have, nvdimm enabled by default and
will honor user provided 'nvdimm=on|off'.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201208164606.4109134-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Generalize the qdev_hotplug variable to the different phases of
machine initialization. We would like to allow different
monitor commands depending on the phase.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
machine_init_done is not the right flag to check when preconfig
is taken into account; for example "./qemu-system-x86_64 -serial
mon:stdio -preconfig" does not print the QEMU monitor header until after
exit_preconfig. Add back a custom bool for mux character devices. This
partially undoes commit c7278b4355 ("chardev: introduce chr_machine_done
hook", 2018-03-12), but it keeps the cleaner logic using a function
pointer in ChardevClass.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qdev_machine_creation_done is only setting a flag now. Extend it to
move more code out of vl.c. Leave only consistency checks and gdbserver
processing in qemu_machine_creation_done.
gdbserver_start can be moved after qdev_machine_creation_done because
it only does listen on the socket and creates some internal data
structures; it does not send any data (e.g. guest state) over the socket.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that there is no RUN_STATE_PRECONFIG anymore that can conflict with
RUN_STATE_INMIGRATE, we can allow -incoming defer with -preconfig.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move post-preconfig initialization to the x-exit-preconfig. If preconfig
is not requested, just exit preconfig mode immediately with the QMP
command.
As a result, the preconfig loop will run with accel_setup_post
and os_setup_post restrictions (xen_restrict, chroot, etc.)
already done.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preconfig state is only used if -incoming is not specified, which
makes the RunState state machine more tricky than it need be. However
there is already an equivalent condition which works even with -incoming,
namely qdev_hotplug. Use it instead of a separate runstate.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I'm moving my git repositories to gitlab.com, update MAINTAINERS
to point to the correct URL.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20201214212032.2999853-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Only softmmu code uses DEFINE_PROP_UUID, and it currently depends
on error_set_from_qdev_prop_error(). Move it to
qdev-properties-system.c to get out of our way when refactoring
the qdev property system.
We can eventually move it back to the core property system later,
after removing usage of error_set_from_qdev_prop_error().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-15-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There are no users of the function outside qdev-properties.c.
Make function static and rename it to get_uint16().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201211220529.2290218-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Make the code more generic and not specific to TYPE_DEVICE.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> #s390 parts
Message-Id: <20201211220529.2290218-13-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Make the code more generic and not specific to TYPE_DEVICE.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201211220529.2290218-12-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
