Drives with interface types other than if=none are for onboard
devices. Unfortunately, any such drives the board doesn't pick up can
still be used with -device, like this:
$ qemu-system-x86_64 -nodefaults -display none -S -drive if=floppy,id=bogus,unit=7 -device ide-cd,drive=bogus -monitor stdio
QEMU 5.0.50 monitor - type 'help' for more information
(qemu) info block
bogus: [not inserted]
Attached to: /machine/peripheral-anon/device[0]
Removable device: not locked, tray closed
(qemu) info qtree
bus: main-system-bus
type System
[...]
bus: ide.1
type IDE
dev: ide-cd, id ""
---> drive = "bogus"
[...]
unit = 0 (0x0)
[...]
This kind of abuse has always worked. Deprecate it:
qemu-system-x86_64: -drive if=floppy,id=bogus,unit=7: warning: bogus if=floppy is deprecated, use if=none
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-9-armbru@redhat.com>
Deprecate
-global isa-fdc.driveA=...
-global isa-fdc.driveB=...
in favour of
-device floppy,unit=0,drive=...
-device floppy,unit=1,drive=...
Same for the other floppy controller devices.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20200622094227.1271650-7-armbru@redhat.com>
It's been deprecated since QEMU v3.1, so it's time to finally
remove it. The "id" parameter can simply be used instead.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
device_del requires an id and not a sysfsfile.
Fixes: bac03ec72f ("s390x/vfio-ap: document hot plug/unplug of vfio-ap device")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200617160604.5593-1-borntraeger@de.ibm.com>
[CH: add missing '$']
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200602135050.593692-1-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a basic example for passing a dasd via vfio-ccw.
Message-Id: <20200518075522.97643-1-cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Add some basic info how to use 3270 devices.
Message-Id: <20200515151518.83950-3-cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Update the -bios deprecation documentation to describe the new
behaviour.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
The RISC-V ISA spec version 1.09.1 has been deprecated in QEMU since
4.1. It's not commonly used so let's remove support for it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
The ISA specific Spike machines have been deprecated in QEMU since 4.1,
let's finally remove them.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
We always miswrote the Fuloong machine... Fix its name.
Add an machine alias to the previous name for backward
compatibility.
Suggested-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-id: <20200526104726.11273-11-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Provide a minimal documentation of the Musca boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200507151819.28444-6-peter.maydell@linaro.org
Add basic documentation of the MPS2 board models.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200507151819.28444-5-peter.maydell@linaro.org
Provide a minimal documentation of the Versatile Express boards
(vexpress-a9, vexpress-a15).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200507151819.28444-4-peter.maydell@linaro.org
Sort the board index into alphabetical order. (Note that we need to
sort alphabetically by the title text of each file, which isn't the
same ordering as sorting by the filename.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200507151819.28444-3-peter.maydell@linaro.org
Add 'Arm' to the Integrator/CP document title, for consistency with
the titling of the other documentation of Arm devboard models
(versatile, realview).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200507151819.28444-2-peter.maydell@linaro.org
Let's add some documentation for the Protected VM functionality.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200319131921.2367-16-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The Linux kernel has dropped support for allowing 32-bit Arm systems
to host KVM guests (kernel commit 541ad0150ca4aa663a2, which just
landed upstream in the 5.7 merge window). Mark QEMU's support for
this configuration as deprecated, so that we can delete that support
code in 5.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
The documentation of our -s and -gdb options is quite old; in
particular it still claims that it will cause QEMU to stop and wait
for the gdb connection, when this has not been true for some time:
you also need to pass -S if you want to make QEMU not launch the
guest on startup.
Improve the documentation to mention this requirement in the
executable's --help output, the documentation of the -gdb option in
the manual, and in the "GDB usage" chapter.
Includes some minor tweaks to these paragraphs of documentation
since I was editing them anyway (such as dropping the description
of our gdb support as "primitive").
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200403094014.9589-1-peter.maydell@linaro.org
Create a subdirectory for s390x under docs/system/ and move the
existing vfio-ap documentation there.
Create an initial document describing s390x system emulation.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200318103940.1169-1-cohuck@redhat.com>
-----BEGIN PGP SIGNATURE-----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=VWQB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-03-17' into staging
QAPI patches for 2020-03-17
# gpg: Signature made Tue 17 Mar 2020 20:50:54 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-03-17: (30 commits)
net: Track netdevs in NetClientState rather than QemuOpt
net: Complete qapi-fication of netdev_add
qmp: constify QmpCommand and list
qapi: Mark deprecated QMP parts with feature 'deprecated'
qapi: New special feature flag "deprecated"
qapi: Replace qmp_dispatch()'s TODO comment by an explanation
qapi: Simplify how qmp_dispatch() gets the request ID
qapi: Simplify how qmp_dispatch() deals with QCO_NO_SUCCESS_RESP
qapi: Inline do_qmp_dispatch() into qmp_dispatch()
qapi: Add feature flags to struct members
qapi/schema: Call QAPIDoc.connect_member() in just one place
qapi/schema: Rename QAPISchemaObjectType{Variant,Variants}
qapi/schema: Reorder classes so related ones are together
qapi/schema: Change _make_features() to a take feature list
qapi/introspect: Factor out _make_tree()
qapi/introspect: Rename *qlit* to reduce confusion
qapi: Consistently put @features parameter right after @ifcond
qapi: Add feature flags to remaining definitions
qapi/schema: Clean up around QAPISchemaEntity.connect_doc()
tests/test-qmp-event: Check event is actually emitted
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here's my final pull request for the qemu-5.0 soft freeze. Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.
Highlights are:
* Numerous fixes for the FWNMI feature
* A handful of cleanups to the device tree construction code
* Numerous fixes for the spapr-vscsi device
* A number of fixes and cleanups for real mode (MMU off) softmmu
handling
* Fixes for handling of the PAPR RMA
* Better handling of hotplug/unplug events during boot
* Assorted other fixes
-----BEGIN PGP SIGNATURE-----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=BPnR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200317' into staging
ppc patch queue 2020-03-17
Here's my final pull request for the qemu-5.0 soft freeze. Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.
Highlights are:
* Numerous fixes for the FWNMI feature
* A handful of cleanups to the device tree construction code
* Numerous fixes for the spapr-vscsi device
* A number of fixes and cleanups for real mode (MMU off) softmmu
handling
* Fixes for handling of the PAPR RMA
* Better handling of hotplug/unplug events during boot
* Assorted other fixes
# gpg: Signature made Tue 17 Mar 2020 09:55:07 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.0-20200317: (45 commits)
pseries: Update SLOF firmware image
ppc/spapr: Ignore common "ibm,nmi-interlock" Linux bug
ppc/spapr: Implement FWNMI System Reset delivery
target/ppc: allow ppc_cpu_do_system_reset to take an alternate vector
ppc/spapr: Allow FWNMI on TCG
ppc/spapr: Fix FWNMI machine check interrupt delivery
ppc/spapr: Add FWNMI System Reset state
ppc/spapr: Change FWNMI names
ppc/spapr: Fix FWNMI machine check failure handling
spapr: Rename DT functions to newer naming convention
spapr: Move creation of ibm,architecture-vec-5 property
spapr: Move creation of ibm,dynamic-reconfiguration-memory dt node
spapr/rtas: Reserve space for RTAS blob and log
pseries: Update SLOF firmware image
ppc/spapr: Move GPRs setup to one place
target/ppc: Fix rlwinm on ppc64
spapr/xive: use SPAPR_IRQ_IPI to define IPI ranges exposed to the guest
hw/scsi/spapr_vscsi: Convert debug fprintf() to trace event
hw/scsi/spapr_vscsi: Prevent buffer overflow
hw/scsi/spapr_vscsi: Do not mix SRP IU size with DMA buffer size
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A number of deprecated QMP arguments and results were missed in commit
eb22aeca65 "docs: document deprecation policy & deprecated features in
appendix" (v2.10.0):
* Commit b33945cfff "block: Accept device model name for
blockdev-open/close-tray" (v2.8.0) deprecated blockdev-open-tray,
blockdev-close-tray argument @device.
* Commit fbe2d8163e "block: Accept device model name for eject"
(v2.8.0) deprecated eject argument @device.
* Commit 70e2cb3bd7 "block: Accept device model name for
blockdev-change-medium" (v2.8.0) deprecated blockdev-change-medium
argument @device.
* Commit 7a9877a026 "block: Accept device model name for
block_set_io_throttle" (v2.8.0) deprecated block_set_io_throttle
argument @device.
* Commit c01c214b69 "block: remove all encryption handling APIs"
(v2.10.0) deprecated query-named-block-nodes result
@encryption_key_missing and query-block result @inserted member
@encryption_key_missing.
* Commit c42e8742f5 "block: Use JSON null instead of "" to disable
backing file" (v2.10.0) deprecated blockdev-add empty string
argument @backing.
Since then, we missed a few more:
* Commit 3c605f4074 "commit: Add top-node/base-node options" (v3.1.0)
deprecated block-commit arguments @base and @top.
* Commit 4db6ceb0b5 "block/dirty-bitmap: add recording and busy
properties" (v4.0.0) deprecated query-named-block-nodes result
@dirty-bitmaps member @status, not just query-block.
Make up for all that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-2-armbru@redhat.com>
Server class POWER CPUs have a "compat" property, which was obsoleted
by commit 7843c0d60d and replaced by a "max-cpu-compat" property on the
pseries machine type. A hack was introduced so that passing "compat" to
-cpu would still produce the desired effect, for the sake of backward
compatibility : it strips the "compat" option from the CPU properties
and applies internally it to the pseries machine. The accessors of the
"compat" property were updated to do nothing but warn the user about the
deprecated status when doing something like:
$ qemu-system-ppc64 -global POWER9-family-powerpc64-cpu.compat=power9
qemu-system-ppc64: warning: CPU 'compat' property is deprecated and has no
effect; use max-cpu-compat machine property instead
This was merged during the QEMU 2.10 timeframe, a few weeks before we
formalized our deprecation process. As a consequence, the "compat"
property fell through the cracks and was never listed in the officialy
deprecated features.
We are now eight QEMU versions later, it is largely time to mention it
in qemu-deprecated.texi. Also, since -global XXX-powerpc64-cpu.compat=
has been emitting warnings since QEMU 2.10 and the usual way of setting
CPU properties is with -cpu, completely remove the "compat" property.
Keep the hack so that -cpu XXX,compat= stays functional some more time,
as required by our deprecation process.
The now empty powerpc_servercpu_properties[] list which was introduced
for "compat" and never had any other use is removed on the way. We can
re-add it in the future if the need for a server class POWER CPU specific
property arises again.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158274357799.140275.12263135811731647490.stgit@bahia.lan>
[dwg: Convert from .texi to .rst to match upstream change]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- Add the '-noTSX' variants for CascadeLake and SkyLake.
- Document the three MSR bits: 'mds-no', 'taa-no', and 'tsx-ctrl'
Two confusing things about 'mds-no' (and the first point applies to
the other two MSRs too):
(1) The 'mds-no' bit will _not_ show up in the guest's /proc/cpuinfo.
Rather it is used to fill in the guest's sysfs:
/sys/devices/system/cpu/vulnerabilities/mds:Not affected
Paolo confirmed on IRC as such.
(2) There are _three_ variants[+] of CascadeLake CPUs, with different
stepping levels: 5, 6, and 7. To quote wikichip.org[*]:
"note that while steppings 6 & 7 are fully mitigated, earlier
stepping 5 is not protected against MSBDS, MLPDS, nor MDSUM"
The above is also indicated in the Intel's document[+], as
indicated by "No" under the three columns of MFBDS, MSBDS, and
MLPDS.
I've expressed this in the docs without belabouring the details.
[+] https://software.intel.com/security-software-guidance/insights/processors-affected-microarchitectural-data-sampling
[*] https://en.wikichip.org/wiki/intel/microarchitectures/cascade_lake#Key_changes_from_Skylake
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20200225165618.6571-3-kchamart@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Xunlong Orange Pi PC machine is a functional ARM machine
based on the Allwinner H3 System-on-Chip. It supports mainline
Linux, U-Boot, NetBSD and is covered by acceptance tests.
This commit adds a documentation text file with a description
of the machine and instructions for the user.
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-19-nieklinnenbank@gmail.com
[PMM: moved file into docs/system/arm to match the reorg
of the arm target part of the docs; tweaked heading to
match other boards]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The company 'Arm' went through a rebranding some years back
involving a recapitalization from 'ARM' to 'Arm'. As a result
our documentation is a bit inconsistent between the two forms.
It's not worth trying to update everywhere in QEMU, but it's
easy enough to make docs/ consistent.
Note that "ARMv8" and similar architecture names, and
older CPU names like "ARM926" still retain all-caps.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-6-peter.maydell@linaro.org
Now we have somewhere to put arm-specific rst documentation,
we can move arm-cpu-features.rst from the docs/ top level
directory into docs/system/arm/.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-5-peter.maydell@linaro.org
Now we've moved the various bits of per-board documentation into
their own files, the top level document is a little bare. Add
some introductory information, including a note that many
of the board models we support are currently undocumented.
(Most sections of this new text were originally written by me
for the wiki page https://wiki.qemu.org/Documentation/Platforms/ARM)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-4-peter.maydell@linaro.org
Currently the documentation for Arm system emulator targets is in a
single target-arm.rst. This describes only some of the boards and
often in a fairly abbreviated fashion. Restructure it so that each
board has its own documentation file in the docs/system/arm/
subdirectory.
This will hopefully encourage us to write board documentation that
describes the board in detail, rather than a few brief paragraphs
in a single long page. The table of contents should also help users
to find the board they care about faster.
Once the structure is in place we'll be able to move microvm.rst
from the top-level docs/ directory.
All the text from the old page is retained, except for the final
paragraph ("A Linux 2.6 test image is available on the QEMU web site.
More information is available in the QEMU mailing-list archive."),
which is deleted. The git history shows this was originally added
in reference to the integratorcp board (at that time the only
Arm board that was supported), and has subsequently gradually been
further and further separated from the integratorcp documentation
by the insertion of other board documentation sections. It's
extremely out of date and no longer accurate, since AFAICT there
isn't an integratorcp kernel on the website any more; so better
deleted than retained.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-3-peter.maydell@linaro.org
It's been deprecated since QEMU v3.1.0. Time to finally remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191205104109.18680-1-thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reworked Thomas's deprecated.texi to the rst
Mapping object-add to the command line as is doesn't result in nice
syntax because of the nesting introduced with 'props'. This becomes
nicer and more consistent with device_add and netdev_add when we accept
properties for the object on the top level instead.
'props' is still accepted after this patch, but marked as deprecated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-8-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We can now delete the old .texi files, which we have been keeping in
the tree as a parallel set of documentation to the new rST sources.
The only remaining use of Texinfo is the autogenerated manuals
and HTML documents created from the QAPI JSON doc comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-33-peter.maydell@linaro.org
Generate the qemu.1 manpage using Sphinx; we do this with a new
top-level rst source file which is just the skeleton of the manpage
and which includes .rst.inc fragments where it needs to incorporate
sections from the larger HTML manuals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-30-peter.maydell@linaro.org
Sphinx doesn't have very good facilities for marking chunks
of documentation as "put this in the manpage only". So instead
we move the parts we want to put into both the HTML manuals
and the manpage into their own .rst.inc files, which we can
include from both the main manual rst files and a new toplevel
rst file that will be the skeleton of the qemu.1 manpage.
In this commit, just split out the parts of the documentation
that go in the manpage.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-29-peter.maydell@linaro.org
This commit contains hand-written fixes for some issues with the
autogenerated rST fragments in qemu-options.hx:
* Sphinx complains about the UTF-8 art table in the documentation of
the -drive option. Replace it with a proper rST format table.
* rST does not like definition list entries with no actual
definition, but it is possible to work around this by putting a
single escaped literal space as the definition line.
* The "-g widthxheight" option documentation suffers particularly
badly from losing the distinction between italics and fixed-width
as a result of the auto conversion, so put it back in again.
* The script missed some places that use the |qemu_system| etc
macros and need to be marked up as parsed-literal blocks.
* The script autogenerated an expanded out version of the
contents of qemu-option-trace.texi; replace it with an
qemu-option-trace.rst.inc include.
This is sufficient that we can enable inclusion of the
option documentation from invocation.rst.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-28-peter.maydell@linaro.org
The SPARC and PPC targets currently have a fragment of target-specific
information about the -g and -prom options which would be better placed
as part of the general documentation of those options in qemu-options.hx.
Move the relevant information to those locations.
SPARC also has a bit of text about the -M option which is out of
date and provides no useful information over the generic documentation
of that option, so just delete it.
The motivation here is again to avoid having to awkwardly include
this text into the rST version of the qemu.1 manpage.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-25-peter.maydell@linaro.org
Currently the per-target documentation for those targets that
implement semihosting includes a bit of text that goes into both the
manual and the manpage about options specific to the target. This
text is redundant with the earlier generic option description of the
semihosting option produced from qemu-options.hx. To avoid having
to create a lot of stub include files to include into the rST
generated qemu.1 manpage, roll target-specific bits of information
into the qemu-options.hx text, so the user doesn't have to look
in two places for this information.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-24-peter.maydell@linaro.org
Add the rST versions of the documentation fragments. Once we've
converted fully from Texinfo to rST we can remove the ETEXI
fragments; for the moment we need both.
Note that most of the SRST fragments are 2-space indented so that the
'info foo' documentation entries appear as a sublist under the 'info'
entry in the top level list.
Again, all we need to do to put the documentation in the Sphinx manual
is a one-line hxtool-doc invocation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-22-peter.maydell@linaro.org
Add the rST versions of the documentation fragments. Once we've
converted fully from Texinfo to rST we can remove the ETEXI
fragments; for the moment we need both.
Since the only consumer of the hmp-commands hxtool documentation
is the HTML manual, all we need to do for the monitor command
documentation to appear in the Sphinx system manual is add the
one line that invokes the hxtool extension on the .hx file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-21-peter.maydell@linaro.org
Apart from targets.rst, which was written by hand, this is an automated
conversion obtained with the following command:
makeinfo --force -o - --docbook \
-D 'qemu_system_x86 QEMU_SYSTEM_X86_MACRO' \
-D 'qemu_system QEMU_SYSTEM_MACRO' \
$texi | pandoc -f docbook -t rst+smart | perl -e '
$/=undef;
$_ = <>;
s/^- − /- /gm;
s/QEMU_SYSTEM_MACRO/|qemu_system|/g;
s/QEMU_SYSTEM_X86_MACRO/|qemu_system_x86|/g;
s/(?=::\n\n +\|qemu)/.. parsed-literal/g;
s/:\n\n::$/::/gm;
print' > $rst
In addition, the following changes were made manually:
- target-i386.rst and target-mips.rst: replace CPU model documentation with
an include directive
- monitor.rst: replace the command section with a comment
- images.rst: add toctree
- target-arm.rst: Replace use of :math: (which Sphinx complains
about) with :sup:, and hide it behind |I2C| and |I2C| substitutions.
Content that is not @included remains exclusive to qemu-doc.texi.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-20-peter.maydell@linaro.org
Message-id: 20200226113034.6741-19-pbonzini@redhat.com
[PMM: Fixed target-arm.rst use of :math:; remove out of date
note about images.rst from commit message; fixed expansion
of |qemu_system_x86|; use parsed-literal in invocation.rst
when we want to use |qemu_system_x86|; fix incorrect subsection
level for "OS requirements" in target-i386.rst; fix incorrect
syntax for making links to other sections of the manual]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We put the whole of this document into the system manual, though
technically a few parts of it apply to qemu-img or qemu-nbd which are
otherwise documented in tools/.
We only make formatting fixes, except for one use of 'appendix' which
we change to 'section' because this isn't an appendix in the Sphinx
manual.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-19-peter.maydell@linaro.org
Message-id: 20200226113034.6741-18-pbonzini@redhat.com
Fix one typo in the process and format more option and
command names as literal text, but make no significant
changes to the content.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-18-peter.maydell@linaro.org
Message-id: 20200226113034.6741-17-pbonzini@redhat.com
security.texi is included from qemu-doc.texi but is not used
in the qemu.1 manpage. So we can do a straightforward conversion
of the contents, which go into the system manual.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-17-peter.maydell@linaro.org
Message-id: 20200226113034.6741-16-pbonzini@redhat.com
This doc was originally written by Daniel P. Berrangé
<berrange@redhat.com>, introduced via commit[1]: 2544e9e4aa (docs: add
guidance on configuring CPU models for x86, 2018-06-27).
In this patch:
- 1-1 conversion of Texinfo to rST, besides a couple of minor
tweaks that are too trivial to mention. (Thanks to Stephen
Finucane on IRC for the suggestion to use rST "definition lists"
instead of bullets in some places.)
Further modifications will be done via a separate patch.
- rST and related infra changes: manual page generation, Makefile
fixes, clean up references to qemu-cpu-models.texi, update year in
the copyright notice, etc.
[1] https://git.qemu.org/?p=qemu.git;a=commit;h=2544e9e4aa
As part of the conversion, we use a more generic 'author' attribution
for the manpage than we previously had, as agreed with the original
author Dan Berrange.
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200228153619.9906-16-peter.maydell@linaro.org
Message-id: 20200226113034.6741-15-pbonzini@redhat.com
[Move macros to defs.rst.inc, split in x86 and MIPS parts,
make qemu-cpu-models.rst a standalone document. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[PMM: Move defs.rst.inc setup to its own commit;
fix minor issues with MAINTAINERS file updates;
drop copyright date change; keep capitalization of
"QEMU Project developers" consistent with other uses;
minor Makefile fixups]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than accumulating generally useful rST substitution
definitions in individual rST files, create a defs.rst.inc where we
can define these. To start with it has the |qemu_system| definition
from qemu-block-drivers.rst.
Add a comment noting a pitfall where putting literal markup in the
definition of |qemu_system| makes it misrender manpage output; this
means the point-of-use must handle the literal markup (which is
almost always done by having it inside a parsed-literal block).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-15-peter.maydell@linaro.org
