Add a PreallocMode parameter to the bdrv_truncate() function implemented
by each block driver. Currently, we always pass PREALLOC_MODE_OFF and no
driver accepts anything else.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_measure() provides a conservative maximum for the size of a new
image. This information is handy if storage needs to be allocated (e.g.
a SAN or an LVM volume) ahead of time.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-2-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Interface for removing persistent bitmap from its storage.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-28-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will be needed to check some restrictions before making bitmap
persistent in qmp-block-dirty-bitmap-add (this functionality will be
added by future patch)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-22-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add format driver handler, which should mark loaded read-only
bitmaps as 'IN_USE' in the image and unset read_only field in
corresponding BdrvDirtyBitmap's.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-14-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that all encryption keys must be provided upfront via
the QCryptoSecret API and associated block driver properties
there is no need for any explicit encryption handling APIs
in the block layer. Encryption can be handled transparently
within the block driver. We only retain an API for querying
whether an image is encrypted or not, since that is a
potentially useful piece of metadata to report to the user.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-18-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Historically the qcow & qcow2 image formats supported a property
"encryption=on" to enable their built-in AES encryption. We'll
soon be supporting LUKS for qcow2, so need a more general purpose
way to enable encryption, with a choice of formats.
This introduces an "encrypt.format" option, which will later be
joined by a number of other "encrypt.XXX" options. The use of
a "encrypt." prefix instead of "encrypt-" is done to facilitate
mapping to a nested QAPI schema at later date.
e.g. the preferred syntax is now
qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-8-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Change the 'int count' parameter in *pwrite_zeros, *pdiscard related
functions (and some others) to 'int bytes', as they both refer to bytes.
This helps with code legibility.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Message-id: 20170609101808.13506-1-el13635@mail.ntua.gr
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It protects only the list of dirty bitmaps; in the next patch we will
also protect their content.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-15-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Start removing migration code from sysemu/sysemu.h.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The file drivers' *_parse_filename() implementations just strip the
optional protocol prefix off the filename. However, for e.g.
"file:foo:bar", this would lead to "foo:bar" being stored as the BDS's
filename which looks like it should be managed using the "foo" protocol.
This is especially troublesome if you then try to resolve a backing
filename based on "foo:bar".
This issue can only occur if the stripped part is a relative filename
("file:/foo:bar" will be shortened to "/foo:bar" and having a slash
before the first colon means that "/foo" is not recognized as a protocol
part). Therefore, we can easily fix it by prepending "./" to such
filenames.
Before this patch:
$ ./qemu-img create -f qcow2 backing.qcow2 64M
Formatting 'backing.qcow2', fmt=qcow2 size=67108864 encryption=off
cluster_size=65536 lazy_refcounts=off refcount_bits=16
$ ./qemu-img create -f qcow2 -b backing.qcow2 file🔝image.qcow2
Formatting 'file🔝image.qcow2', fmt=qcow2 size=67108864
backing_file=backing.qcow2 encryption=off cluster_size=65536
lazy_refcounts=off refcount_bits=16
$ ./qemu-io file🔝image.qcow2
can't open device file🔝image.qcow2: Could not open backing file:
Unknown protocol 'top'
After this patch:
$ ./qemu-io file🔝image.qcow2
[no error]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170522195217.12991-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We had some conflicting documentation: a nice 8-way table that
described all possible combinations of DATA, ZERO, and
OFFSET_VALID, contrasted with text that implied that OFFSET_VALID
always meant raw data could be read directly. Furthermore, the
text refers a lot to bs->file, even though the interface was
updated back in 67a0fd2a to let the driver pass back a specific
BDS (not necessarily bs->file). As the 8-way table is the
intended semantics, simplify the rest of the text to get rid of
the confusion.
ALLOCATED is always set by the block layer for convenience (drivers
do not have to worry about it). RAW is used only internally, but
by more than the raw driver. Document these additional items on
the driver callback.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-4-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
With image locking, permissions affect other qemu processes as well. We
want to be sure that the destination can run, so let's drop permissions
on the source when migration completes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Instead of manually calling blk_resume_after_migration() in migration
code after doing bdrv_invalidate_cache_all(), integrate the BlockBackend
activation with cache invalidation into a single function. This is
achieved with a new callback in BdrvChildRole that is called by
bdrv_invalidate_cache_all().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Klim Kireev <proffk@virtuozzo.mipt.ru>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Message-id: 1491405505-31620-2-git-send-email-den@openvz.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error parameter to the block drivers' bdrv_truncate() interface.
If a block driver does not set this in case of an error, the generic
bdrv_truncate() implementation will do so.
Where it is obvious, this patch also makes some block drivers set this
value.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-4-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_child_set_perm alone is not very usable because the caller must
call bdrv_child_check_perm first. This is already encapsulated
conveniently in bdrv_child_try_set_perm, so remove the other prototypes
from the header and fix the one wrong caller, block/mirror.c.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When adding an Error parameter, bdrv_replace_in_backing_chain() would
become nothing more than a wrapper around change_parent_backing_link().
So make the latter public, renamed as bdrv_replace_node(), and remove
bdrv_replace_in_backing_chain().
Most of the callers just remove a node from the graph that they just
inserted, so they can use &error_abort, but completion of a mirror job
with 'replaces' set can actually fail.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
change_parent_backing_link() will need to update multiple BdrvChild
objects at once. Checking permissions reference by reference doesn't
work because permissions need to be consistent only with all parents
moved to the new child.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Management tools need to be able to know about every node in the graph
and need a way to address them. Changing the graph structure was okay
because libvirt doesn't really manage the node level yet, but future
libvirt versions need to deal with both new and old version of qemu.
This new option to blockdev-commit allows the client to set a node-name
for the automatically inserted filter driver, and at the same time
serves as a witness for a future libvirt that this version of qemu does
automatically insert a filter driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Management tools need to be able to know about every node in the graph
and need a way to address them. Changing the graph structure was okay
because libvirt doesn't really manage the node level yet, but future
libvirt versions need to deal with both new and old version of qemu.
This new option to blockdev-mirror allows the client to set a node-name
for the automatically inserted filter driver, and at the same time
serves as a witness for a future libvirt that this version of qemu does
automatically insert a filter driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Backing files are somewhat special compared to other kinds of children
because they are attached and detached using bdrv_set_backing_hd()
rather than the normal set of functions, which does a few more things
like setting backing blockers, toggling the BDRV_O_NO_BACKING flag,
setting parent_bs->backing_file, etc.
These special features are a reason why change_parent_backing_link()
can't handle backing files yet. With abstracting the additional features
into .attach/.detach callbacks, we get a step closer to a function that
can actually deal with this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
When the parents' child links are updated in bdrv_append() or
bdrv_replace_in_backing_chain(), this should affect all child links of
BlockBackends or other nodes, but not on child links held for other
purposes (like for setting permissions). This patch allows to control
the behaviour per BdrvChildRole.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
For meaningful error messages in the permission system, we need to get
some human-readable description of the parent of a BdrvChild.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Some devices allow a media change between read-only and read-write
media. They need to adapt the permissions in their .change_media_cb()
implementation, which can fail. So add an Error parameter to the
function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
vvfat is the last remaining driver that can have children, but doesn't
implement .bdrv_child_perm() yet. The default handlers aren't suitable
here, so let's implement a very simple driver-specific one that protects
the internal child from being used by other users as good as our
permissions permit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Almost all format drivers have the same characteristics as far as
permissions are concerned: They have one or more children for storing
their own data and, more importantly, metadata (can be written to and
grow even without external write requests, must be protected against
other writers and present consistent data) and optionally a backing file
(this is just data, so like for a filter, it only depends on what the
parent nodes need).
This provides a default implementation that can be shared by most of
our format drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Most filters need permissions related to read and write for their
children, but only if the node has a parent that wants to use the same
operation on the filter. The same is true for resize.
This adds a default implementation that simply forwards all necessary
permissions to all children of the node and leaves the other permissions
unchanged.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In many cases, the required permissions of one node on its children
depend on what its parents require from it. For example, the raw format
or most filter drivers only need to request consistent reads if that's
something that one of their parents wants.
In order to achieve this, this patch introduces two new BlockDriver
callbacks. The first one lets drivers first check (recursively) whether
the requested permissions can be set; the second one actually sets the
new permission bitmask.
Also add helper functions that drivers can use in their implementation
of the callbacks to update their permissions on a specific child.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
When attaching a node as a child to a new parent, the required and
shared permissions for this parent are checked against all other parents
of the node now, and an error is returned if there is a conflict.
This allows error returns to a function that previously always
succeeded, and the same is true for quite a few callers and their
callers. Converting all of them within the same patch would be too much,
so for now everyone tells that they don't need any permissions and allow
everyone else to do anything. This way we can use &error_abort initially
and convert caller by caller to pass actual permission requirements and
implement error handling.
All these places are marked with FIXME comments and it will be the job
of the next patches to clean them up again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-19-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_io_plug and bdrv_io_unplug are only called (via their
BlockBackend equivalents) after starting asynchronous I/O.
bdrv_drain is not going to be called while they are running,
because---even if a coroutine runs for some reason---it will
only drain in the next iteration of the event loop through
bdrv_co_yield_to_drain.
So this mechanism is unnecessary, get rid of it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161129113334.605-1-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These files deal with the file protocol, not the raw format (the
file protocol is often used with other formats, and the raw
format is not forced to use the file protocol). Rename things
to make it a bit easier to follow.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Refactor backup_start as backup_job_create, which only creates the job,
but does not automatically start it. The old interface, 'backup_start',
is not kept in favor of limiting the number of nearly-identical interfaces
that would have to be edited to keep up with QAPI changes in the future.
Callers that wish to synchronously start the backup_block_job can
instead just call block_job_start immediately after calling
backup_job_create.
Transactions are updated to use the new interface, calling block_job_start
only during the .commit phase, which helps prevent race conditions where
jobs may finish before we even finish building the transaction. This may
happen, for instance, during empty block backup jobs.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1478587839-9834-6-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
There's no reason to leave this to blockdev; we can do it in blockjobs
directly and get rid of an extra callback for most users.
All non-internal events, even those created outside of QMP, will
consistently emit events.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477584421-1399-5-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Bubble up the internal interface to commit and backup jobs, then switch
replication tasks over to using this methodology.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477584421-1399-4-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
aio_poll is not thread safe; for example bdrv_drain can hang if
the last in-flight I/O operation is completed in the I/O thread after
the main thread has checked bs->in_flight.
The bug remains latent as long as all of it is called within
aio_context_acquire/aio_context_release, but this will change soon.
To fix this, if bdrv_drain is called from outside the I/O thread,
signal the main AioContext through a dummy bottom half. The event
loop then only runs in the I/O thread.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-18-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Unlike tracked_requests, this field also counts throttled requests,
and remains non-zero if an AIO operation needs a BH to be "really"
completed.
With this change, it is no longer necessary to have a dummy
BdrvTrackedRequest for requests that are never serialising, and
it is no longer necessary to poll the AioContext once after
bdrv_requests_pending(bs) returns false.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-5-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This allows drivers to implement ioctls in a coroutine-based way.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Obviously, we should write to '@target'.
Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Reviewed-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1473851019-7005-2-git-send-email-baiyaowei@cmss.chinamobile.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Unused function declarations were found using a simple gcc plugin and
manually verified by grepping the sources.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Auto complete mirror job in background to prevent from
blocking synchronously
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Wang WeiWei <wangww.fnst@cn.fujitsu.com>
Message-id: 1469602913-20979-7-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The idea is simple - backup is "written-once" data. It is written block
by block and it is large enough. It would be nice to save storage
space and compress it.
The patch adds a flag to the qmp/hmp drive-backup command which enables
block compression. Compression should be implemented in the format driver
to enable this feature.
There are some limitations of the format driver to allow compressed writes.
We can write data only once. Though for backup this is perfectly fine.
These limitations are maintained by the driver and the error will be
reported if we are doing something wrong.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are no block drivers left that implement the old
.bdrv_write_compressed interface, so it can be removed. Also now we have
no need to use the bdrv_pwrite_compressed function and we can remove it
entirely.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For bdrv_pwrite_compressed() it looks like most of the code creating
coroutine is duplicated in bdrv_prwv_co(). So we can just add a flag
(BDRV_REQ_WRITE_COMPRESSED) and use bdrv_prwv_co() as a generic one.
In the end we get coroutine oriented function for write compressed by using
bdrv_co_pwritev/blk_co_pwritev with BDRV_REQ_WRITE_COMPRESSED flag.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following commit
commit 3ff2f67a7c
Author: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Date: Mon Jul 18 22:39:52 2016 +0300
block: ignore flush requests when storage is clean
has introduced a regression.
There is a problem that it is still possible for 2 requests to execute
in non sequential fashion and sometimes this results in a deadlock
when bdrv_drain_one/all are called for BDS with such stalled requests.
1. Current flushed_gen and flush_started_gen is 1.
2. Request 1 enters bdrv_co_flush to with write_gen 1 (i.e. the same
as flushed_gen). It gets past flushed_gen != flush_started_gen and
sets flush_started_gen to 1 (again, the same it was before).
3. Request 1 yields somewhere before exiting bdrv_co_flush
4. Request 2 enters bdrv_co_flush with write_gen 2. It gets past
flushed_gen != flush_started_gen and sets flush_started_gen to 2.
5. Request 2 runs to completion and sets flushed_gen to 2
6. Request 1 is resumed, runs to completion and sets flushed_gen to 1.
However flush_started_gen is now 2.
From here on out flushed_gen is always != to flush_started_gen and all
further requests will wait on flush_queue. This change replaces
flush_started_gen with an explicitly tracked active flush request.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1471457214-3994-2-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Dell Equallogic iSCSI SANs have a very unusual advertised geometry:
$ iscsi-inq -e 1 -c $((0xb0)) iscsi://XXX/0
wsnz:0
maximum compare and write length:1
optimal transfer length granularity:0
maximum transfer length:0
optimal transfer length:0
maximum prefetch xdread xdwrite transfer length:0
maximum unmap lba count:30720
maximum unmap block descriptor count:2
optimal unmap granularity:30720
ugavalid:1
unmap granularity alignment:0
maximum write same length:30720
which says that both the maximum and the optimal discard size
is 15M. It is not immediately apparent if the device allows
discard requests not aligned to the optimal size, nor if it
allows discards at a finer granularity than the optimal size.
I tried to find details in the SCSI Commands Reference Manual
Rev. A on what valid values of maximum and optimal sizes are
permitted, but while that document mentions a "Block Limits
VPD Page", I couldn't actually find documentation of that page
or what values it would have, or if a SCSI device has an
advertisement of its minimal unmap granularity. So it is not
obvious to me whether the Dell Equallogic device is compliance
with the SCSI specification.
Fortunately, it is easy enough to support non-power-of-2 sizing,
even if it means we are less efficient than truly possible when
targetting that device (for example, it means that we refuse to
unmap anything that is not a multiple of 15M and aligned to a
15M boundary, even if the device truly does support a smaller
granularity where unmapping actually works).
Reported-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1469129688-22848-5-git-send-email-eblake@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all drivers have a byte-based .bdrv_co_pdiscard(), we
no longer need to worry about the sector-based version. We can
also relax our minimum alignment to 1 for drivers that support it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-18-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There's enough drivers with a sector-based callback that it will
be easier to switch one at a time. This patch adds a byte-based
callback, and then after all drivers are swapped, we'll drop the
sector-based callback.
[checkpatch doesn't like the space after coroutine_fn in
block_int.h, but it's consistent with the rest of the file]
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-10-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Another step towards byte-based interfaces everywhere. Replace
the sector-based driver callback .bdrv_aio_discard() with a new
byte-based .bdrv_aio_pdiscard(). Only raw-posix and RBD drivers
are affected, so it was not worth splitting into multiple patches.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468624988-423-9-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Underlying HBitmap operates even with uint64_t. Thus this change is safe.
This would be useful f.e. to mark entire bitmap dirty in one call.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1468503209-19498-2-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Some guests (win2008 server for example) do a lot of unnecessary
flushing when underlying media has not changed. This adds additional
overhead on host when calling fsync/fdatasync.
This change introduces a write generation scheme in BlockDriverState.
Current write generation is checked against last flushed generation to
avoid unnessesary flushes.
The problem with excessive flushing was found by a performance test
which does parallel directory tree creation (from 2 processes).
Results improved from 0.424 loops/sec to 0.432 loops/sec.
Each loop creates 10^3 directories with 10 files in each.
This affected some blkdebug testcases that were expecting error logs from
failure-injected flushes which are now skipped entirely
(tests 026 071 089).
This also affects the performance of block jobs and thus BLOCK_JOB_READY
events for driver-mirror and active block-commit commands now arrives
faster, before QMP send successfully returns to caller (tests 141 144).
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-5-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
This patch adds a new optional 'job-id' parameter to 'block-commit',
allowing the user to specify the ID of the block job to be created.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a new optional 'job-id' parameter to 'block-stream',
allowing the user to specify the ID of the block job to be created.
The HMP 'block_stream' command remains unchanged.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a new optional 'job-id' parameter to 'blockdev-backup'
and 'drive-backup', allowing the user to specify the ID of the block
job to be created.
The HMP 'drive_backup' command remains unchanged.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a new optional 'job-id' parameter to 'blockdev-mirror'
and 'drive-mirror', allowing the user to specify the ID of the block
job to be created.
The HMP 'drive_mirror' command remains unchanged.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
'stream-start' has a parameter called 'backing-file', which is the
string to be written to bs->backing when the job finishes.
In the stream_start() implementation it is called 'backing_file_str',
but it the prototype in the header file it is called 'base_id'.
This patch fixes it so the name is the same in both cases and is
consistent with other cases (like commit_start()).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is the final patch for converting the common I/O path to take
a BdrvChild parameter instead of BlockDriverState.
The completion of this conversion means that all users that perform I/O
on an image need to actually hold a reference (in the form of BdrvChild,
possible as part of a BlockBackend) to that image. This also protects
against inconsistent use of BlockBackend vs. BlockDriverState functions
because direct use of a BlockDriverState isn't possible any more and
blk->root is private for block-backends.c.
In addition, we can now distinguish different users in the I/O path,
and the future op blockers work is going to add assertions based on
permissions stored in BdrvChild.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Using int for values that are only used as booleans is confusing.
While at it, rearrange a couple of members so that all the bools
are contiguous.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It makes more sense to have ALL block size limit constraints
in the same struct. Improve the documentation while at it.
Simplify a couple of conditionals, now that we have audited and
documented that request_alignment is always non-zero.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sector-based limits are awkward to think about; in our on-going
quest to move to byte-based interfaces, convert max_discard and
discard_alignment. Rename them, using 'pdiscard' as an aid to
track which remaining discard interfaces need conversion, and so
that the compiler will help us catch the change in semantics
across any rebased code. The BlockLimits type is now completely
byte-based; and in iscsi.c, sector_limits_lun2qemu() is no
longer needed.
pdiscard_alignment is made unsigned (we use power-of-2 alignments
as bitmasks, where unsigned is easier to think about) while
leaving max_pdiscard signed (since we still have an 'int'
interface); this is comparable to what commit cf081fc did for
write zeroes limits. We may later want to make everything an
unsigned 64-bit limit - but that requires a bigger code audit.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Improve the documentation of the write zeroes limits, to mention
additional constraints that drivers should observe. Worth squashing
into commit cf081fca, if that hadn't been pushed already :)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sector-based limits are awkward to think about; in our on-going
quest to move to byte-based interfaces, convert max_transfer_length
and opt_transfer_length. Rename them (dropping the _length suffix)
so that the compiler will help us catch the change in semantics
across any rebased code, and improve the documentation. Use unsigned
values, so that we don't have to worry about negative values and
so that bit-twiddling is easier; however, we are still constrained
by 2^31 of signed int in most APIs.
When a value comes from an external source (iscsi and raw-posix),
sanitize the results to ensure that opt_transfer is a power of 2.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's possible that an AioContext notifier user was close to finishing
when .detach_aio_context() or .attached_aio_context() is called. In
that case they may call bdrv_remove_aio_context_notifier() during the
callback.
Use safe iteration to avoid crashing when the notifier list is modified
during iteration. We must not only handle the case where the current
aio notifier is removed during a callback but also the one where any
other aio notifier is removed.
The next patch adds an AioContext notifier for block jobs and they
really could be terminating just as .detach_aio_context() is invoked.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1466096189-6477-6-git-send-email-stefanha@redhat.com
Currently, we are trying to move the backing BDS from the source to the
target in bdrv_replace_in_backing_chain() which is called from
mirror_exit(). However, mirror_complete() already tries to open the
target's backing chain with a call to bdrv_open_backing_file().
First, we should only set the target's backing BDS once. Second, the
mirroring block job has a better idea of what to set it to than the
generic code in bdrv_replace_in_backing_chain() (in fact, the latter's
conditions on when to move the backing BDS from source to target are not
really correct).
Therefore, remove that code from bdrv_replace_in_backing_chain() and
leave it to mirror_complete().
Depending on what kind of mirroring is performed, we furthermore want to
use different strategies to open the target's backing chain:
- If blockdev-mirror is used, we can assume the user made sure that the
target already has the correct backing chain. In particular, we should
not try to open a backing file if the target does not have any yet.
- If drive-mirror with mode=absolute-paths is used, we can and should
reuse the already existing chain of nodes that the source BDS is in.
In case of sync=full, no backing BDS is required; with sync=top, we
just link the source's backing BDS to the target, and with sync=none,
we use the source BDS as the target's backing BDS.
We should not try to open these backing files anew because this would
lead to two BDSs existing per physical file in the backing chain, and
we would like to avoid such concurrent access.
- If drive-mirror with mode=existing is used, we have to use the
information provided in the physical image file which means opening
the target's backing chain completely anew, just as it has been done
already.
If the target's backing chain shares images with the source, this may
lead to multiple BDSs per physical image file. But since we cannot
reliably ascertain this case, there is nothing we can do about it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160610185750.30956-3-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It is always true for open images now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows drivers to share code between normal I/O and vmstate
accesses.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This brings it in line with .bdrv_save_vmstate().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that all drivers have been converted to a byte interface,
we no longer need a sector interface.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Update bdrv_co_do_write_zeroes() to be byte-based, and select
between the new byte-based bdrv_co_pwrite_zeroes() or the old
bdrv_co_write_zeroes(). The next patches will convert drivers,
then remove the old interface.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Another step towards removing sector-based interfaces: convert
the maximum write and minimum alignment values from sectors to
bytes. Rename the variables to let the compiler check that all
users are converted to the new semantics.
The maximum remains an int as long as BDRV_REQUEST_MAX_SECTORS
is constrained by INT_MAX (this means that we can't even
support a 2G write_zeroes, but just under it) - changing
operation lengths to unsigned or to 64-bits is a much bigger
audit, and debatable if we even want to do it (since at the
core, a 32-bit platform will still have ssize_t as its
underlying limit on write()).
Meanwhile, alignment is changed to 'uint32_t', since it makes no
sense to have an alignment larger than the maximum write, and
less painful to use an unsigned type with well-defined behavior
in bit operations than to have to worry about what happens if
a driver mistakenly supplies a negative alignment.
Add an assert that no one was trying to use sectors to get a
write zeroes larger than 2G, and therefore that a later conversion
to bytes won't be impacted by keeping the limit at 32 bits.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When changing the BlockDriverState that a BdrvChild points to while the
node is currently drained, we must call the .drained_end() parent
callback. Conversely, when this means attaching a new node that is
already drained, we need to call .drained_begin().
bdrv_root_attach_child() takes now an opaque parameter, which is needed
because the callbacks must also be called if we're attaching a new child
to the BlockBackend when the root node is already drained, and they need
a way to identify the BlockBackend. Previously, child->opaque was set
too late and the callbacks would still see it as NULL.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
This patch removes the remaining users of bs->blk, which will allow us
to have multiple BBs on top of a single BDS. In the meantime, all checks
that are currently in place to prevent the user from creating such
setups can be switched to bdrv_has_blk() instead of accessing BDS.blk.
Future patches can allow them and e.g. enable users to mirror to a block
device that already has a BlockBackend on it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In order to get rid of bs->blk for bdrv_get_device_name() and
bdrv_get_device_or_node_name(), ask all parents for their name and
simply pick the first one.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
We want to get rid of BlockDriverState.blk in order to allow multiple
BlockBackends per BDS. Converting the device callbacks in block.c (which
assume a single BlockBackend) to per-child callbacks gets us rid of the
first few instances.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This moves the throttling related part of the BDS life cycle management
to BlockBackend. The throttling group reference is now kept even when no
medium is inserted.
With this commit, throttling isn't disabled and then re-enabled any more
during graph reconfiguration. This fixes the temporary breakage of I/O
throttling when used with live snapshots or block jobs that manipulate
the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
This removes the last part of I/O throttling from block/io.c and moves
it to the BlockBackend.
Instead of having knowledge about throttling inside io.c, we can call a
BdrvChild callback .drained_begin/end, which happens to drain the
throttled requests for BlockBackend parents.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
BlockBackends use it to get a back pointer from BdrvChild to
BlockBackend in any BdrvChildRole callbacks.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch changes where the throttling state is stored (used to be the
BlockDriverState, now it is the BlockBackend), but it doesn't actually
make it a BB level feature yet. For example, throttling is still
disabled when the BDS is detached from the BB.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
As a first step towards moving I/O throttling to the BlockBackend level,
this patch changes all pointers in struct ThrottleGroup from referencing
a BlockDriverState to referencing a BlockBackend.
This change is valid because we made sure that throttling can only be
enabled on BDSes which have a BB attached.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
In some cases, we want to take a quorum child offline, and take
another child online.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1462865799-19402-2-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The block layer has a couple of cases where it can lose
Force Unit Access semantics when writing a large block of
zeroes, such that the request returns before the zeroes
have been guaranteed to land on underlying media.
SCSI does not support FUA during WRITESAME(10/16); FUA is only
supported if it falls back to WRITE(10/16). But where the
underlying device is new enough to not need a fallback, it
means that any upper layer request with FUA semantics was
silently ignoring BDRV_REQ_FUA.
Conversely, NBD has situations where it can support FUA but not
ZERO_WRITE; when that happens, the generic block layer fallback
to bdrv_driver_pwritev() (or the older bdrv_co_writev() in qemu
2.6) was losing the FUA flag.
The problem of losing flags unrelated to ZERO_WRITE has been
latent in bdrv_co_do_write_zeroes() since commit aa7bfbff, but
back then, it did not matter because there was no FUA flag. It
became observable when commit 93f5e6d8 paved the way for flags
that can impact correctness, when we should have been using
bdrv_co_writev_flags() with modified flags. Compare to commit
9eeb6dd, which got flag manipulation right in
bdrv_co_do_zero_pwritev().
Symptoms: I tested with qemu-io with default writethrough cache
(which is supposed to use FUA semantics on every write), and
targetted an NBD client connected to a server that intentionally
did not advertise NBD_FLAG_SEND_FUA. When doing 'write 0 512',
the NBD client sent two operations (NBD_CMD_WRITE then
NBD_CMD_FLUSH) to get the fallback FUA semantics; but when doing
'write -z 0 512', the NBD client sent only NBD_CMD_WRITE.
The fix is do to a cleanup bdrv_co_flush() at the end of the
operation if any step in the middle relied on a BDS that does
not natively support FUA for that step (note that we don't
need to flush after every operation, if the operation is broken
into chunks based on bounce-buffer sizing). Each BDS gains a
new flag .supported_zero_flags, which parallels the use of
.supported_write_flags but only when accessing a zero write
operation (the flags MUST be different, because of SCSI having
different semantics based on WRITE vs. WRITESAME; and also
because BDRV_REQ_MAY_UNMAP only makes sense on zero writes).
Also fix some documentation to describe -ENOTSUP semantics,
particularly since iscsi depends on those semantics.
Down the road, we may want to add a driver where its
.bdrv_co_pwritev() honors all three of BDRV_REQ_FUA,
BDRV_REQ_ZERO_WRITE, and BDRV_REQ_MAY_UNMAP, and advertise
this via bs->supported_write_flags for blocks opened by that
driver; such a driver should NOT supply .bdrv_co_write_zeroes
nor .supported_zero_flags. But none of the drivers touched
in this patch want to do that (the act of writing zeroes is
different enough from normal writes to deserve a second
callback).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pre-patch, .supported_write_flags lives at the driver level, which
means we are blindly declaring that all block devices using a
given driver will either equally support FUA, or that we need a
fallback at the block layer. But there are drivers where FUA
support is a per-block decision: the NBD block driver is dependent
on the remote server advertising NBD_FLAG_SEND_FUA (and has
fallback code to duplicate the flush that the block layer would do
if NBD had not set .supported_write_flags); and the iscsi block
driver is dependent on the mode sense bits advertised by the
underlying device (and is currently silently ignoring FUA requests
if the underlying device does not support FUA).
The fix is to make supported flags as a per-BDS option, set during
.bdrv_open(). This patch moves the variable and fixes NBD and iscsi
to set it only conditionally; later patches will then further
simplify the NBD driver to quit duplicating work done at the block
layer, as well as tackle the fact that SCSI does not support FUA
semantics on WRITESAME(10/16) but only on WRITE(10/16).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Vmdk images have metadata to indicate the vmware virtual
hardware version image was created/tested to run with.
Allow users to specify that version via new 'hwversion'
option.
[ kwolf: Adjust qemu-iotests common.filter ]
Signed-off-by: Janne Karhunen <Janne.Karhunen@gmail.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are no block drivers left that implement the old .bdrv_read/write
interface, so it can be removed now. This gets us rid of the
corresponding emulation functions, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Many parts of the block layer are already byte granularity. The block
driver interface, however, was still missing an interface that allows
making use of this. This patch introduces a new BlockDriver interface,
which is based on coroutines, vectored, has flags and uses a byte
granularity. This is now the preferred interface for new drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
It used to be an internal helper function just for implementing
bdrv_co_do_readv/writev(), but now that it's a public interface, it
deserves a name without "do" in it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
