Remove extra 'i' variable to fix this warning :
../target/ppc/kvm.c: In function ‘kvm_arch_put_registers’:
../target/ppc/kvm.c:963:13: warning: declaration of ‘i’ shadows a previous local [-Wshadow=compatible-local]
963 | int i;
| ^
../target/ppc/kvm.c:906:9: note: shadowed declaration is here
906 | int i;
| ^
../target/ppc/kvm.c: In function ‘kvm_arch_get_registers’:
../target/ppc/kvm.c:1265:13: warning: declaration of ‘i’ shadows a previous local [-Wshadow=compatible-local]
1265 | int i;
| ^
../target/ppc/kvm.c:1212:9: note: shadowed declaration is here
1212 | int i, ret;
| ^
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20231006053526.1031252-1-clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
trace/control.c:288:34: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
void trace_opt_parse(const char *optarg)
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/getopt.h:77:14: note: previous declaration is here
extern char *optarg; /* getopt(3) external variables */
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-17-philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
softmmu/tpm.c:178:59: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
int tpm_config_parse(QemuOptsList *opts_list, const char *optarg)
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/getopt.h:77:14: note: previous declaration is here
extern char *optarg; /* getopt(3) external variables */
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-16-philmd@linaro.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
softmmu/vl.c:1069:44: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static void parse_display_qapi(const char *optarg)
^
softmmu/vl.c:1224:39: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static void monitor_parse(const char *optarg, const char *mode, bool pretty)
^
softmmu/vl.c:1634:17: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
const char *optarg = qdict_get_try_str(qdict, "type");
^
softmmu/vl.c:1784:45: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static void object_option_parse(const char *optarg)
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/getopt.h:77:14: note: previous declaration is here
extern char *optarg; /* getopt(3) external variables */
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-15-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Tweak two parameter names]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
semihosting/arm-compat-semi.c: In function ‘do_common_semihosting’:
semihosting/arm-compat-semi.c:379:13: warning: declaration of ‘ret’ shadows a previous local [-Wshadow=local]
379 | int ret, err = 0;
| ^~~
semihosting/arm-compat-semi.c:370:14: note: shadowed declaration is here
370 | uint32_t ret;
| ^~~
semihosting/arm-compat-semi.c:682:27: warning: declaration of ‘ret’ shadows a previous local [-Wshadow=local]
682 | abi_ulong ret;
| ^~~
semihosting/arm-compat-semi.c:370:9: note: shadowed declaration is here
370 | int ret;
| ^~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-14-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
util/guest-random.c:90:45: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
int qemu_guest_random_seed_main(const char *optarg, Error **errp)
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/getopt.h:77:14: note: previous declaration is here
extern char *optarg; /* getopt(3) external variables */
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-13-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
util/cutils.c:1147:17: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
const char *exec_dir = qemu_get_exec_dir();
^
util/cutils.c:1035:20: note: previous declaration is here
static const char *exec_dir;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-12-philmd@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
ui/cocoa.m:346:20: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
QemuCocoaView *cocoaView = userInfo;
^
ui/cocoa.m:342:16: note: previous declaration is here
QemuCocoaView *cocoaView;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-11-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
semihosting/config.c:134:49: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
int qemu_semihosting_config_options(const char *optarg)
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/getopt.h:77:14: note: previous declaration is here
extern char *optarg; /* getopt(3) external variables */
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-10-philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
qom/object_interfaces.c:262:53: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
ObjectOptions *user_creatable_parse_str(const char *optarg, Error **errp)
^
qom/object_interfaces.c:298:46: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
bool user_creatable_add_from_str(const char *optarg, Error **errp)
^
qom/object_interfaces.c:313:49: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
void user_creatable_process_cmdline(const char *optarg)
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/getopt.h:77:14: note: previous declaration is here
extern char *optarg; /* getopt(3) external variables */
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-9-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
qemu-io.c:478:36: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static void add_user_command(char *optarg)
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/getopt.h:77:14: note: previous declaration is here
extern char *optarg; /* getopt(3) external variables */
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-8-philmd@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
qemu-img.c:247:46: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static bool is_valid_option_list(const char *optarg)
^
qemu-img.c:265:53: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static int accumulate_options(char **options, char *optarg)
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/getopt.h:77:14: note: previous declaration is here
extern char *optarg; /* getopt(3) external variables */
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-7-philmd@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
os-posix.c:103:31: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
bool os_set_runas(const char *optarg)
^
os-posix.c:176:32: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
void os_set_chroot(const char *optarg)
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/getopt.h:77:14: note: previous declaration is here
extern char *optarg; /* getopt(3) external variables */
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-5-philmd@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
net/net.c:1680:35: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
bool netdev_is_modern(const char *optarg)
^
net/net.c:1714:38: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
void netdev_parse_modern(const char *optarg)
^
net/net.c:1728:60: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
void net_client_parse(QemuOptsList *opts_list, const char *optarg)
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/getopt.h:77:14: note: previous declaration is here
extern char *optarg; /* getopt(3) external variables */
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-4-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename a variable to make this code compilable with -Wshadow.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231004131338.215081-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename a variable in vhost_dev_sync_region() and remove a superfluous
declaration in vhost_commit() to make this code compilable with "-Wshadow".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231004114809.105672-1-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
"len" is used as parameter of the functions virtio_write_config()
and virtio_read_config(), and additionally as a local variable,
so this causes a compiler warning when compiling with "-Wshadow"
and can be confusing for the reader. Rename the local variables
to "caplen" to avoid this problem.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231004095302.99037-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename the innermost local variables to avoid compiler warnings
with "-Wshadow".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231004084939.96349-1-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The "err" variable is only used twice in this code, in a very
local fashion of first assigning it and then checking it in the
next line. So there is no need to declare this variable a second
time in the innermost block, we can re-use the variable that is
declared at the beginning of the function. This fixes the compiler
warning that occurs with "-Wshadow".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231004083900.95856-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Code changes that addresses all compiler complaints coming from enabling
-Wshadow flags. Enabling -Wshadow catches cases of local variables shadowing
other local variables or parameters. These makes the code confusing and/or adds
bugs that are difficult to catch.
See also
Subject: Help wanted for enabling -Wshadow=local
Message-Id: <87r0mqlf9x.fsf@pond.sub.org>
https://lore.kernel.org/qemu-devel/87r0mqlf9x.fsf@pond.sub.org
CC: Markus Armbruster <armbru@redhat.com>
CC: Philippe Mathieu-Daude <philmd@linaro.org>
CC: mst@redhat.com
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20231003102803.6163-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
[1839/2601] Compiling C object libqemu-loongarch64-softmmu.fa.p/hw_loongarch_virt.c.o
../hw/loongarch/virt.c: In function 'loongarch_irq_init':
../hw/loongarch/virt.c:665:14: warning: declaration of 'i' shadows a previous local [-Wshadow=compatible-local]
for (int i = 0; i < num; i++) {
^
../hw/loongarch/virt.c:582:19: note: shadowed declaration is here
int cpu, pin, i, start, num;
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20230926071253.3601021-1-gaosong@loongson.cn>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename the version not burried in the macro to cap_h.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20230925152258.5444-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The A/UX timer calibration loop runs continuously until 2 consecutive iterations
differ by at least 0x492 timer ticks. Modern hosts execute the timer calibration
loop so fast that this situation never occurs causing a hang on boot.
Use a similar method to Shoebill which is to randomly add 0x500 to the T2
counter value during calibration to enable it to eventually succeed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-21-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the Apple Quadra 800 Developer Note document, the Quadra 800 ROM
consists of 2 ROM code sections based at offsets 0x0 and 0x800000. A/UX attempts
to access the toolbox ROM at the lower offset during startup, so provide a
memory alias to allow the access to succeed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-20-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Tests on real Q800 hardware show that the ESCC is addressable at multiple locations
within the ESCC memory region - at least 0xc000, 0xc020 (as expected by the MacOS
toolbox ROM) and 0xc040.
All released NetBSD kernels before 10 use the 0xc000 address which causes a fatal
error when running the MacOS booter. Add a single memory region alias at 0xc000
to enable NetBSD kernels to start booting under QEMU.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-19-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When the NetBSD kernel initialises it can leave the ADB interrupt asserted
depending upon where in the ADB poll cycle the MacOS ADB interrupt handler
is when the NetBSD kernel disables interrupts.
The NetBSD ADB driver uses the ADB interrupt state to determine if the ADB
is busy and refuses to send ADB commands unless it is clear. To ensure that
this doesn't happen, always clear the ADB interrupt when switching to A/UX
mode to ensure that the bus enumeration always occurs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-18-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
NetBSD switches directly to IDLE state without switching the shift register to
input mode. Duplicate the existing ADB_STATE_IDLE logic in input mode from when
the shift register is in output mode which allows the ADB autopoll handler to
handle the response.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-17-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
NetBSD assumes it can send its first ADB command after sending the ADB_BUSRESET
command in ADB_STATE_NEW without changing the state back to ADB_STATE_IDLE
first as detailed in the ADB protocol.
Add a workaround to detect this condition at the start of ADB enumeration
and send the next command written to SR after a ADB_BUSRESET onto the bus
regardless, even if we don't detect a state transition to ADB_STATE_NEW.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The MacOS toolbox ROM calculates the number of branches that can be executed
per millisecond as part of its timer calibration. Since modern hosts are
considerably quicker than original hardware, the negative counter reaches zero
before the calibration completes leading to division by zero later in
CALCULATESLOD.
Instead of trying to fudge the timing loop (which won't work for TimeDBRA/TimeSCCDB
anyhow), use the pattern of access to the VIA1 registers to detect when SETUPTIMEK
has finished executing and write some well-known good timer values to TimeDBRA
and TimeSCCDB taken from real hardware with a suitable scaling factor.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Update the IWM/ISM register block decoding to match the description given in the
"SWIM Chip Users Reference". This allows us to validate the device response to
the guest OS which currently only does just enough to indicate that the floppy
drive is unavailable.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The swim chip provides an implementation of both Apple's IWM and ISM floppy disk
controllers. Split the existing implementation into separate register banks for
each controller, whilst also switching the IWM registers from 16-bit to 8-bit
as implemented in real hardware.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This determines whether the Apple Sound Chip (ASC) is set to enhanced mode
(default) or to original mode. The real Q800 hardware used an EASC chip however
a lot of older software only works with the older ASC chip.
Adding this as a machine parameter allows QEMU to be used as an developer aid
for testing and migrating code from ASC to EASC.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The Quadra 800 has the enhanced ASC (EASC) audio chip which supports both the
legacy IRQ routing through VIA2 and also "A/UX" mode routing direct to the
CPU.
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20231004083806.757242-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
MacOS (un)helpfully leaves the FIFO engine running even when all the samples have
been written to the hardware, and expects the FIFO status flags and IRQ to be
updated continuously.
There is an additional problem in that not all audio backends guarantee an
all-zero output when there is no FIFO data available, in particular the Windows
dsound backend which re-uses its internal circular buffer causing the last played
sound to loop indefinitely.
Whilst this is effectively a bug in the Windows dsound backend, work around it
for now using a simple heuristic: if the FIFO remains empty for half a cycle
(~23ms) then continuously fill the generated buffer with empty silence.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The Apple Sound Chip was primarily used by the Macintosh II to generate sound
in hardware which was previously handled by the toolbox ROM with software
interrupts.
Implement both the standard ASC and also the enhanced ASC (EASC) functionality
which is used in the Quadra 800.
Note that whilst real ASC hardware uses AUDIO_FORMAT_S8, this implementation uses
AUDIO_FORMAT_U8 instead because AUDIO_FORMAT_S8 is rarely used and not supported
by some audio backends like PulseAudio and DirectSound when played directly with
-audiodev out.mixing-engine=off.
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Co-developed-by: Volker Rümelin <vr_qemu@t-online.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20231004083806.757242-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
MacOS attempts a series of writes and reads over the entire RAM area in order
to determine the amount of RAM within the machine. Allow accesses to the
entire RAM area ignoring writes and always reading zero for areas where there
is no physical RAM installed to allow MacOS to detect the memory size without
faulting.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It is needed because it defines the BIOSConfig area.
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <20231004083806.757242-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
MacOS reads this address to identify the hardware.
This is a basic implementation returning the ID of Quadra 800.
Details:
http://mess.redump.net/mess/driver_info/mac_technical_notes
"There are 3 ID schemes [...]
The third and most scalable is a machine ID register at 0x5ffffffc.
The top word must be 0xa55a to be valid. Then bits 15-11 are 0 for
consumer Macs, 1 for portables, 2 for high-end 68k, and 3 for high-end
PowerPC. Bit 10 is 1 if additional ID bits appear elsewhere (e.g. in VIA1).
The rest of the bits are a per-model identifier.
Model Lower 16 bits of ID
...
Quadra/Centris 610/650/800 0x2BAD"
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004083806.757242-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The djMEMC controller is used to store information related to the physical memory
configuration.
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004083806.757242-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Convert the GLUE device to 3-phase reset. The legacy method
doesn't do anything that's invalid in the hold phase, so the
conversion is simple and not a behaviour change.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20231004083806.757242-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
During migration restoring, vfio_enable_vectors() is called to restore
enabling MSI-X interrupts for assigned devices. It sets the range from
0 to nr_vectors to kernel to enable MSI-X and the vectors unmasked in
guest. During the MSI-X enabling, all the vectors within the range are
allocated according to the VFIO_DEVICE_SET_IRQS ioctl.
When dynamic MSI-X allocation is supported, we only want the guest
unmasked vectors being allocated and enabled. Use vector 0 with an
invalid fd to get MSI-X enabled, after that, all the vectors can be
allocated in need.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Guests typically enable MSI-X with all of the vectors masked in the MSI-X
vector table. To match the guest state of device, QEMU enables MSI-X by
enabling vector 0 with userspace triggering and immediately release.
However the release function actually does not release it due to already
using userspace mode.
It is no need to enable triggering on host and rely on the mask bit to
avoid spurious interrupts. Use an invalid fd (i.e. fd = -1) is enough
to get MSI-X enabled.
After dynamic MSI-X allocation is supported, the interrupt restoring
also need use such way to enable MSI-X, therefore, create a function
for that.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The vector_use callback is used to enable vector that is unmasked in
guest. The kernel used to only support static MSI-X allocation. When
allocating a new interrupt using "static MSI-X allocation" kernels,
QEMU first disables all previously allocated vectors and then
re-allocates all including the new one. The nr_vectors of VFIOPCIDevice
indicates that all vectors from 0 to nr_vectors are allocated (and may
be enabled), which is used to loop all the possibly used vectors when
e.g., disabling MSI-X interrupts.
Extend the vector_use function to support dynamic MSI-X allocation when
host supports the capability. QEMU therefore can individually allocate
and enable a new interrupt without affecting others or causing interrupts
lost during runtime.
Utilize nr_vectors to calculate the upper bound of enabled vectors in
dynamic MSI-X allocation mode since looping all msix_entries_nr is not
efficient and unnecessary.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Kernel provides the guidance of dynamic MSI-X allocation support of
passthrough device, by clearing the VFIO_IRQ_INFO_NORESIZE flag to
guide user space.
Fetch the flags from host to determine if dynamic MSI-X allocation is
supported.
Originally-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>