The documentation on SDL_RenderPresent function states that
"the backbuffer should be considered invalidated after each present",
so copy the entire texture on each redraw.
On the other hand, SDL_UpdateTexture function is described as
"fairly slow function", so restrict it to just the changed pixels.
Also added SDL_RenderClear call, as suggested in the documentation
page on SDL_RenderPresent.
Signed-off-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Message-id: 20180205133228.25082-1-anatoly.trosinenko@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On one of our client's node, due to trying to read from closed ioc,
a segmentation fault occured. Corresponding backtrace:
0 object_get_class (obj=obj@entry=0x0)
1 qio_channel_readv_full (ioc=0x0, iov=0x7ffe55277180 ...
2 qio_channel_read (ioc=<optimized out> ...
3 vnc_client_read_buf (vs=vs@entry=0x55625f3c6000, ...
4 vnc_client_read_plain (vs=0x55625f3c6000)
5 vnc_client_read (vs=0x55625f3c6000)
6 vnc_client_io (ioc=<optimized out>, condition=G_IO_IN, ...
7 g_main_dispatch (context=0x556251568a50)
8 g_main_context_dispatch (context=context@entry=0x556251568a50)
9 glib_pollfds_poll ()
10 os_host_main_loop_wait (timeout=<optimized out>)
11 main_loop_wait (nonblocking=nonblocking@entry=0)
12 main_loop () at vl.c:1909
13 main (argc=<optimized out>, argv=<optimized out>, ...
Having analyzed the coredump, I understood that the reason is that
ioc_tag is reset on vnc_disconnect_start and ioc is cleaned
in vnc_disconnect_finish. Between these two events due to some
reasons the ioc_tag was set again and after vnc_disconnect_finish
the handler is running with freed ioc,
which led to the segmentation fault.
The patch checks vs->disconnecting in places where we call
qio_channel_add_watch and resets handler if disconnecting == TRUE
to prevent such an occurrence.
Signed-off-by: Klim Kireev <klim.kireev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180207094844.21402-1-klim.kireev@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vnc_listen_io() does not own the reference on the 'cioc' parameter is it
passed, so should not be unref'ing it.
Fixes: 13e1d0e71e
Reported-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180215102602.10864-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-19-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-14-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qlist.h
drop from 4551 (out of 4743) to 16 in my "build everything" tree.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-12-armbru@redhat.com>
qapi/qmp/types.h is a convenience header to include a number of
qapi/qmp/ headers. Since we rarely need all of the headers
qapi/qmp/types.h includes, we bypass it most of the time. Most of the
places that use it don't need all the headers, either.
Include the necessary headers directly, and drop qapi/qmp/types.h.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-6-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-4-armbru@redhat.com>
keycodemapdb updated to add the QKeyCodes muhenkan and katakanahiragana
Signed-off-by: Miika S <miika9764@gmail.com>
Message-Id: <20180116134217.8725-12-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In this previous commit:
commit 8f61f1c5a6
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Dec 18 19:12:20 2017 +0000
ui: track how much decoded data we consumed when doing SASL encoding
I attempted to fix a flaw with tracking how much data had actually been
processed when encoding with SASL. With that flaw, the VNC server could
mistakenly discard queued data that had not been sent.
The fix was not quite right though, because it merely decremented the
vs->output.offset value. This is effectively discarding data from the
end of the pending output buffer. We actually need to discard data from
the start of the pending output buffer. We also want to free memory that
is no longer required. The correct way to handle this is to use the
buffer_advance() helper method instead of directly manipulating the
offset value.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20180201155841.27509-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC server already has the ability to listen on multiple sockets.
Converting it to use the QIONetListener APIs though, will reduce the
amount of code in the VNC server and improve the clarity of what is
left.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180201164514.10330-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The previous commit:
commit 2ec78706d1
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jan 17 16:47:15 2018 +0000
ui: convert GTK and SDL1 frontends to keycodemapdb
changed the x_keymap.c keymap so that its target was qcodes instead of
qnums. It updated the GTK frontend to take account of this change, but
forgot to update the SDL1 frontend. Thus the SDL frontend was getting
qcodes but dispatching them as if they were qnums. IOW, keyboard input
was completely hosed with SDL1. Since the keyboard layout tables are
still all based on qnums, it is easier to just keep SDL1 using qnums as
it will be deleted in a few releases time.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20180201180033.14255-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The qcode-to-linux keymaps was accidentally added in the wrong place
by
commit de80d78594
Author: Owen Smith <owen.smith@citrix.com>
Date: Fri Nov 3 11:56:28 2017 +0000
ui: generate qcode to linux mappings
breaking the alphabetical ordering of keymaps
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180117164118.8510-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the qcode_to_keycode table with automatically
generated tables.
Missing entries in qcode_to_keycode now fixed:
- Q_KEY_CODE_KP_COMMA -> 0x2d
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the qcode_to_keycode_set1, qcode_to_keycode_set2,
and qcode_to_keycode_set3 tables with automatically
generated tables.
Missing entries in qcode_to_keycode_set1 now fixed:
- Q_KEY_CODE_SYSRQ -> 0x54
- Q_KEY_CODE_PRINT -> 0x54 (NB ignored due to special case)
- Q_KEY_CODE_AGAIN -> 0xe005
- Q_KEY_CODE_PROPS -> 0xe006
- Q_KEY_CODE_UNDO -> 0xe007
- Q_KEY_CODE_FRONT -> 0xe00c
- Q_KEY_CODE_COPY -> 0xe078
- Q_KEY_CODE_OPEN -> 0x64
- Q_KEY_CODE_PASTE -> 0x65
- Q_KEY_CODE_CUT -> 0xe03c
- Q_KEY_CODE_LF -> 0x5b
- Q_KEY_CODE_HELP -> 0xe075
- Q_KEY_CODE_COMPOSE -> 0xe05d
- Q_KEY_CODE_PAUSE -> 0xe046
- Q_KEY_CODE_KP_EQUALS -> 0x59
And some mistakes corrected:
- Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana)
instead of of 0x77 (Hirigana)
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xe05d) and is now mapped to 0xe01e
- Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead
of to 0xe041 (Find)
- Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0
as the prefix
Missing entries in qcode_to_keycode_set2 now fixed:
- Q_KEY_CODE_PRINT -> 0x7f (NB ignored due to special case)
- Q_KEY_CODE_COMPOSE -> 0xe02f
- Q_KEY_CODE_PAUSE -> 0xe077
- Q_KEY_CODE_KP_EQUALS -> 0x0f
And some mistakes corrected:
- Q_KEY_CODE_HIRAGANA was mapped to 0x13 (Katakanahiragana)
instead of of 0x62 (Hirigana)
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xe02f) and is now not mapped
- Q_KEY_CODE_FIND was mapped to 0xe010 (Search) and is now
not mapped.
- Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0
as the prefix
Missing entries in qcode_to_keycode_set3 now fixed:
- Q_KEY_CODE_ASTERISK -> 0x7e
- Q_KEY_CODE_SYSRQ -> 0x57
- Q_KEY_CODE_LESS -> 0x13
- Q_KEY_CODE_STOP -> 0x0a
- Q_KEY_CODE_AGAIN -> 0x0b
- Q_KEY_CODE_PROPS -> 0x0c
- Q_KEY_CODE_UNDO -> 0x10
- Q_KEY_CODE_COPY -> 0x18
- Q_KEY_CODE_OPEN -> 0x20
- Q_KEY_CODE_PASTE -> 0x28
- Q_KEY_CODE_FIND -> 0x30
- Q_KEY_CODE_CUT -> 0x38
- Q_KEY_CODE_HELP -> 0x09
- Q_KEY_CODE_COMPOSE -> 0x8d
- Q_KEY_CODE_AUDIONEXT -> 0x93
- Q_KEY_CODE_AUDIOPREV -> 0x94
- Q_KEY_CODE_AUDIOSTOP -> 0x98
- Q_KEY_CODE_AUDIOMUTE -> 0x9c
- Q_KEY_CODE_VOLUMEUP -> 0x95
- Q_KEY_CODE_VOLUMEDOWN -> 0x9d
- Q_KEY_CODE_CALCULATOR -> 0xa3
- Q_KEY_CODE_AC_HOME -> 0x97
And some mistakes corrected:
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0x8d) and is now 0x91
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Drop no_frame flag from sdl_display_init argument list, use a global
variable instead. This is temporary until -no-frame support is dropped
altogether when we remove sdl1 support.
Remove any traces of noframe from sdl2 code. It is just dead code as
sdl2 doesn't support the SDL_NOFRAME window flag any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180115154855.30850-3-kraxel@redhat.com
The SDL 2.0 release was made in Aug, 2013:
https://www.libsdl.org/release/
That will soon be 4 + 1/2 years ago, which is enough time to consider
the 2.0 series widely supported.
Thus we deprecate the SDL 1.2 support, which will allow us to delete it
in the last release of 2018. By this time, SDL 2.0 will be more than 5
years old.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180115142533.24585-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is a reserved value and doesn't have a corresponding
valid scancode.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164717.15855-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Versions of GTK prior to 3.22 did not correctly set the keyval
field when VK_PAUSE was received on Windows.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164717.15855-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The x_keycode_to_pc_keycode and evdev_keycode_to_pc_keycode
tables are replaced with automatically generated tables.
In addition the X11 heuristics are improved to detect running
on XQuartz and XWin X11 servers, to activate the correct OS-X
and Win32 keycode maps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164717.15855-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pixman returns a signed int for the image width/height, but the VNC
protocol only permits a unsigned int16. Effective framebuffer size
is determined by the guest, limited by the video RAM size, so the
dimensions are unlikely to exceed the range of an unsigned int16,
but this is not currently validated.
With the current use of 'int' for client width/height, the calculation
of offsets in vnc_update_throttle_offset() suffers from integer size
promotion and sign extension, causing coverity warnings
*** CID 1385147: Integer handling issues (SIGN_EXTENSION)
/ui/vnc.c: 979 in vnc_update_throttle_offset()
973 * than that the client would already suffering awful audio
974 * glitches, so dropping samples is no worse really).
975 */
976 static void vnc_update_throttle_offset(VncState *vs)
977 {
978 size_t offset =
>>> CID 1385147: Integer handling issues (SIGN_EXTENSION)
>>> Suspicious implicit sign extension:
"vs->client_pf.bytes_per_pixel" with type "unsigned char" (8 bits,
unsigned) is promoted in "vs->client_width * vs->client_height *
vs->client_pf.bytes_per_pixel" to type "int" (32 bits, signed), then
sign-extended to type "unsigned long" (64 bits, unsigned). If
"vs->client_width * vs->client_height * vs->client_pf.bytes_per_pixel"
is greater than 0x7FFFFFFF, the upper bits of the result will all be 1.
979 vs->client_width * vs->client_height * vs->client_pf.bytes_per_pixel;
Change client_width / client_height to be a size_t to avoid sign
extension and integer promotion. Then validate that dimensions are in
range wrt the RFB protocol u16 limits.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180118155254.17053-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace all occurs of __FUNCTION__ except for the check in checkpatch
with the non GCC specific __func__.
One line in hcd-musb.c was manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
[THH: Removed hunks related to pxa2xx_mmci.c (fixed already)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
When using a mouse's scroll wheel in a guest with
the cocoa front-end, the mouse pointer moves up
and down instead of scrolling the window. This
patch fixes this problem.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 20180108180707.7976-1-programmingkidx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The point of writing a macro embedded in a 'do { ... } while (0)'
loop (particularly if the macro has multiple statements or would
otherwise end with an 'if' statement) is so that the macro can be
used as a drop-in statement with the caller supplying the
trailing ';'. Although our coding style frowns on brace-less 'if':
if (cond)
statement;
else
something else;
that is the classic case where failure to use do/while(0) wrapping
would cause the 'else' to pair with any embedded 'if' in the macro
rather than the intended outer 'if'. But conversely, if the macro
includes an embedded ';', then the same brace-less coding style
would now have two statements, making the 'else' a syntax error
rather than pairing with the outer 'if'. Thus, even though our
coding style with required braces is not impacted, ending a macro
with ';' makes our code harder to port to projects that use
brace-less styles.
The change should have no semantic impact. I was not able to
fully compile-test all of the changes (as some of them are
examples of the ugly bit-rotting debug print statements that are
completely elided by default, and I didn't want to recompile
with the necessary -D witnesses - cleaning those up is left as a
bite-sized task for another day); I did, however, audit that for
all files touched, all callers of the changed macros DID supply
a trailing ';' at the callsite, and did not appear to be used
as part of a brace-less conditional.
Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171201232433.25193-7-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When SDL2 windows change focus while a key is held, the window that
receives the focus also receives a new KeyDown event, without an
autorepeat flag. This means that if a WM places the qemu console
over the main window after Ctrl-Alt-2, the console closes immediately
after opening. Then, the main window receives the KeyDown event again
and the whole process repeats.
This patch makes the SDL2 UI ignore the KeyDown events on a window that
just received the focus, if the GUI modifier was held. The ignore flag
is reset on a first KeyUp event. This effectively works around the issue
above.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Message-Id: <20171117112258.5888-4-makovick@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This fields points to an old interface that is no more
used in the current code.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20171122135625.16625-1-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The GTK 3.0 release was made in Feb, 2011:
https://blog.gtk.org/2011/02/10/gtk-3-0-released/
That will soon be 7 years ago, which is enough time to consider
the 3.x series widely supported.
Thus we deprecate the GTK 2.x support, which will allow us to
delete it in the last release of 2018. By this time, GTK 3.x
will be almost 8 years old.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171212113440.16483-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If kbd_queue is not empty and queue_count >= queue_limit,
we should free evt.
Change-Id: Ieeacf90d5e7e370a40452ec79031912d8b864d83
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Message-id: 20171225023730.5512-1-linzhecheng@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While the QIOChannel APIs for reading/writing data return ssize_t, with negative
value indicating an error, the VNC code passes this return value through the
vnc_client_io_error() method. This detects the error condition, disconnects the
client and returns 0 to indicate error. Thus all the VNC helper methods should
return size_t (unsigned), and misleading comments which refer to the possibility
of negative return values need fixing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-14-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC client throttling is quite subtle so will benefit from having trace
points available for live debugging.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-13-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The previous patches fix problems with throttling of forced framebuffer updates
and audio data capture that would cause the QEMU output buffer size to grow
without bound. Those fixes are graceful in that once the client catches up with
reading data from the server, everything continues operating normally.
There is some data which the server sends to the client that is impractical to
throttle. Specifically there are various pseudo framebuffer update encodings to
inform the client of things like desktop resizes, pointer changes, audio
playback start/stop, LED state and so on. These generally only involve sending
a very small amount of data to the client, but a malicious guest might be able
to do things that trigger these changes at a very high rate. Throttling them is
not practical as missed or delayed events would cause broken behaviour for the
client.
This patch thus takes a more forceful approach of setting an absolute upper
bound on the amount of data we permit to be present in the output buffer at
any time. The previous patch set a threshold for throttling the output buffer
by allowing an amount of data equivalent to one complete framebuffer update and
one seconds worth of audio data. On top of this it allowed for one further
forced framebuffer update to be queued.
To be conservative, we thus take that throttling threshold and multiply it by
5 to form an absolute upper bound. If this bound is hit during vnc_write() we
forceably disconnect the client, refusing to queue further data. This limit is
high enough that it should never be hit unless a malicious client is trying to
exploit the sever, or the network is completely saturated preventing any sending
of data on the socket.
This completes the fix for CVE-2017-15124 started in the previous patches.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-12-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC server must throttle data sent to the client to prevent the 'output'
buffer size growing without bound, if the client stops reading data off the
socket (either maliciously or due to stalled/slow network connection).
The current throttling is very crude because it simply checks whether the
output buffer offset is zero. This check is disabled if the client has requested
a forced update, because we want to send these as soon as possible.
As a result, the VNC client can cause QEMU to allocate arbitrary amounts of RAM.
They can first start something in the guest that triggers lots of framebuffer
updates eg play a youtube video. Then repeatedly send full framebuffer update
requests, but never read data back from the server. This can easily make QEMU's
VNC server send buffer consume 100MB of RAM per second, until the OOM killer
starts reaping processes (hopefully the rogue QEMU process, but it might pick
others...).
To address this we make the throttling more intelligent, so we can throttle
full updates. When we get a forced update request, we keep track of exactly how
much data we put on the output buffer. We will not process a subsequent forced
update request until this data has been fully sent on the wire. We always allow
one forced update request to be in flight, regardless of what data is queued
for incremental updates or audio data. The slight complication is that we do
not initially know how much data an update will send, as this is done in the
background by the VNC job thread. So we must track the fact that the job thread
has an update pending, and not process any further updates until this job is
has been completed & put data on the output buffer.
This unbounded memory growth affects all VNC server configurations supported by
QEMU, with no workaround possible. The mitigating factor is that it can only be
triggered by a client that has authenticated with the VNC server, and who is
able to trigger a large quantity of framebuffer updates or audio samples from
the guest OS. Mostly they'll just succeed in getting the OOM killer to kill
their own QEMU process, but its possible other processes can get taken out as
collateral damage.
This is a more general variant of the similar unbounded memory usage flaw in
the websockets server, that was previously assigned CVE-2017-15268, and fixed
in 2.11 by:
commit a7b20a8efa
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Oct 9 14:43:42 2017 +0100
io: monitor encoutput buffer size from websocket GSource
This new general memory usage flaw has been assigned CVE-2017-15124, and is
partially fixed by this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-11-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC server must throttle data sent to the client to prevent the 'output'
buffer size growing without bound, if the client stops reading data off the
socket (either maliciously or due to stalled/slow network connection).
The current throttling is very crude because it simply checks whether the
output buffer offset is zero. This check must be disabled if audio capture is
enabled, because when streaming audio the output buffer offset will rarely be
zero due to queued audio data, and so this would starve framebuffer updates.
As a result, the VNC client can cause QEMU to allocate arbitrary amounts of RAM.
They can first start something in the guest that triggers lots of framebuffer
updates eg play a youtube video. Then enable audio capture, and simply never
read data back from the server. This can easily make QEMU's VNC server send
buffer consume 100MB of RAM per second, until the OOM killer starts reaping
processes (hopefully the rogue QEMU process, but it might pick others...).
To address this we make the throttling more intelligent, so we can throttle
when audio capture is active too. To determine how to throttle incremental
updates or audio data, we calculate a size threshold. Normally the threshold is
the approximate number of bytes associated with a single complete framebuffer
update. ie width * height * bytes per pixel. We'll send incremental updates
until we hit this threshold, at which point we'll stop sending updates until
data has been written to the wire, causing the output buffer offset to fall
back below the threshold.
If audio capture is enabled, we increase the size of the threshold to also
allow for upto 1 seconds worth of audio data samples. ie nchannels * bytes
per sample * frequency. This allows the output buffer to have a mixture of
incremental framebuffer updates and audio data queued, but once the threshold
is exceeded, audio data will be dropped and incremental updates will be
throttled.
This unbounded memory growth affects all VNC server configurations supported by
QEMU, with no workaround possible. The mitigating factor is that it can only be
triggered by a client that has authenticated with the VNC server, and who is
able to trigger a large quantity of framebuffer updates or audio samples from
the guest OS. Mostly they'll just succeed in getting the OOM killer to kill
their own QEMU process, but its possible other processes can get taken out as
collateral damage.
This is a more general variant of the similar unbounded memory usage flaw in
the websockets server, that was previously assigned CVE-2017-15268, and fixed
in 2.11 by:
commit a7b20a8efa
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Oct 9 14:43:42 2017 +0100
io: monitor encoutput buffer size from websocket GSource
This new general memory usage flaw has been assigned CVE-2017-15124, and is
partially fixed by this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-10-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The logic for determining if it is possible to send an update to the client
will become more complicated shortly, so pull it out into a separate method
for easier extension later.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-9-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to the RFB protocol, a client sends one or more framebuffer update
requests to the server. The server can reply with a single framebuffer update
response, that covers all previously received requests. Once the client has
read this update from the server, it may send further framebuffer update
requests to monitor future changes. The client is free to delay sending the
framebuffer update request if it needs to throttle the amount of data it is
reading from the server.
The QEMU VNC server, however, has never correctly handled the framebuffer
update requests. Once QEMU has received an update request, it will continue to
send client updates forever, even if the client hasn't asked for further
updates. This prevents the client from throttling back data it gets from the
server. This change fixes the flawed logic such that after a set of updates are
sent out, QEMU waits for a further update request before sending more data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-8-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the VNC servers tracks whether a client has requested an incremental
or forced update with two boolean flags. There are only really 3 distinct
states to track, so create an enum to more accurately reflect permitted states.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-7-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When we encode data for writing with SASL, we encode the entire pending output
buffer. The subsequent write, however, may not be able to send the full encoded
data in one go though, particularly with a slow network. So we delay setting the
output buffer offset back to zero until all the SASL encoded data is sent.
Between encoding the data and completing sending of the SASL encoded data,
however, more data might have been placed on the pending output buffer. So it
is not valid to set offset back to zero. Instead we must keep track of how much
data we consumed during encoding and subtract only that amount.
With the current bug we would be throwing away some pending data without having
sent it at all. By sheer luck this did not previously cause any serious problem
because appending data to the send buffer is always an atomic action, so we
only ever throw away complete RFB protocol messages. In the case of frame buffer
updates we'd catch up fairly quickly, so no obvious problem was visible.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-6-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vnc_update_client() method checks the 'has_dirty' flag to see if there are
dirty regions that are pending to send to the client. Regardless of this flag,
if a forced update is requested, updates must be sent. For unknown reasons
though, the code also tries to sent updates if audio capture is enabled. This
makes no sense as audio capture state does not impact framebuffer contents, so
this check is removed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that previous dead / unreachable code has been removed, we can simplify
the indentation in the vnc_client_update method.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A previous commit:
commit 5a8be0f73d
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Wed Jul 13 12:21:20 2016 +0200
vnc: make sure we finish disconnect
Added a check for vs->disconnecting at the very start of the
vnc_update_client method. This means that the very next "if"
statement check for !vs->disconnecting always evaluates true,
and is thus redundant. This in turn means the vs->disconnecting
check at the very end of the method never evaluates true, and
is thus unreachable code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is only one caller of vnc_update_client and that always passes false
for the 'sync' parameter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171218191228.31018-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use keycodedb to generate a qcode to linux mapping
Signed-off-by: Owen Smith <owen.smith@citrix.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
With SDL 2.0.6, calling SDL_ShowWindow during SDL_WINDOWEVENT_HIDDEN
blocks all subsequent display updates.
Instead of trying to override the change, just update the scon->hidden
flag.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Message-Id: <20171112193032.9724-2-makovick@gmail.com>
This is a partial revert of d3f3a0f453,
which in turn is a workaround for a SDL bug. The bug is fixed in 2.0.6,
see https://bugzilla.libsdl.org/show_bug.cgi?id=3410
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Prevents displaying of a doubled mouse pointer when moving the pointer
to the screen edges when fullscreen.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Message-Id: <20171112193032.9724-8-makovick@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also use a proper enum parameter for SDL_ShowCursor
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Message-Id: <20171112193032.9724-4-makovick@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
register checks for dcl->ds being NULL, to avoid registering
the same dcl twice.
Therefore dcl->ds must be cleared on unregister, otherwise
un-registering and re-registering doesn't work.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1510809
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20171109105154.29414-1-kraxel@redhat.com
Send those ctrl-alt key combos that QEMU doesn't treat specially to
the guest rather than ignoring them.
All the case where we do special handling of ctrl-alt-X exit the
event handling using a "return" statement, so we can simply allow
the rest to fall through into the normal key handling by deleting
the now-spurious "else".
We take the opportunity to clean up some oddly-formatted and
now rather uninformative comments by removing them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the cocoa user interface relis on the user pushing
control-alt to ungrab the mouse. This is patch changes the key
combination to control-alt-g to be in line with the GTK user
interface.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 20171102213907.11443-1-programmingkidx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make scrolling in the monitor work, by correctly passing through
control+key combinations.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 20171101154607.1582-1-programmingkidx@gmail.com
[PMM: fixed coding style nits; cleaned up commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix console selection keys so that the right console is selected.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 20171005190449.15591-1-programmingkidx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Latest keycodemapdb has a fix for Sun keyboard Pause mapping
and backcompat fix for QEMU's treatment of 0xb7 as an alternative
to 0x54 for triggering Print/SysRq
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171019142848.572-10-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'sysrq' key was mistakenly added to QEMU to deal with incorrect handling
of the 'print' key in the ps2 device:
commit f2289cb692
Author: balrog <balrog@c046a42c-6fe2-441c-8c8c-71466251a162>
Date: Wed Jun 4 10:14:16 2008 +0000
Add sysrq to key names known by "sendkey".
Adding sysrq keycode to the table enabling running sysrq debugging in
the guest via the monitor sendkey command, like:
(qemu) sendkey alt-sysrq-t
Tested on x86-64 target and Linux guest.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
The ps2 device is now fixed wrt modifiers and the 'print' key. Further the
handling of the 'sysrq' key has some problems of its own, documented in the
previous commit. To cleanup this mess, we convert any use of 'sysrq' into
'print' prior to dispatching the event to device models.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171019142848.572-9-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code converting key numbers to QKeyCode in the 'input-send-event'
command mistakenly accessed the key->u.qcode union field instead of
the key->u.number field. This is harmless because the fields use the
same size datatype in both cases, but none the less it should be fixed
to avoid confusion.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171019142848.572-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Previously we enforced that all key events are using QKeyCodes
at time they are sent:
commit af07e5ff02
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri Sep 29 11:12:00 2017 +0100
ui: convert key events to QKeyCodes immediately
This commit forget to fix the code for the legacy 'sendkey'
command which still accepts key numbers from the user, which
then need converting to QKeyCodes
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171019142848.572-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
egl_texture_blit() blits a texture, simliar to egl_fb_blit() but by
rendering the texture to the screen instead of using a framebuffer blit.
egl_texture_blend() renders a texture with alpha blending, will be used
to render the cursor to the screen.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010135453.6704-6-kraxel@redhat.com
Add helper function to import a dma-buf as opengl texture.
Also add a helper to release the texture again.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010135453.6704-5-kraxel@redhat.com
Add vertex shader which flips the texture upside down while blitting it.
Add argument to qemu_gl_run_texture_blit() to enable flipping.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010135453.6704-4-kraxel@redhat.com
With the upcoming dmabuf support in qemu there will be more users of the
shaders than just console-gl.c. So rename ConsoleGLState to
QemuGLShader, rename some functions too, move code from console-gl.c to
shaders.c.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010135453.6704-3-kraxel@redhat.com
This patch adds support for dma-bufs to the qemu console interfaces.
It adds a new "struct QemuDmaBuf" to represent a dmabuf with accociated
metatdata (size, format). It adds three functions (and
DisplayChangeListenerOps operations) to set a dma-buf as display
scanout, as cursor and to release a dmabuf.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010135453.6704-2-kraxel@redhat.com
The gd_gl_area_scanout_texture must destroy framebuffer if there is
no texture id instead of no framebuffer id.
The effect was a black screen with "-vga virtio -display gtk,gl=on"
options.
The bug was introduce by a4f113fd "gtk: use framebuffer helper functions."
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@blade-group.com>
Message-id: 20171002124052.13829-1-anthoine.bourgeois@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vte_terminal_copy_clipboard() is deprecated in VTE 0.50.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All public code should use qemu_input_event_send_key* functions
instead of creating an event directly.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-7-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Always use QKeyCode in the InputKeyEvent struct, by converting key
numbers to QKeyCode at the time the event is created. This allows
the code processing / consuming key events to assume QKeyCode is
used. The only place we accept a key number in the InputKeyEvent
struct is with QMP commands sent by the user.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-6-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the number_to_qcode, qcode_to_number and linux_to_qcode
tables with automatically generated tables.
Missing entries in linux_to_qcode now fixed:
KEY_LINEFEED -> Q_KEY_CODE_LF
KEY_KPEQUAL -> Q_KEY_CODE_KP_EQUALS
KEY_COMPOSE -> Q_KEY_CODE_COMPOSE
KEY_AGAIN -> Q_KEY_CODE_AGAIN
KEY_PROPS -> Q_KEY_CODE_PROPS
KEY_UNDO -> Q_KEY_CODE_UNDO
KEY_FRONT -> Q_KEY_CODE_FRONT
KEY_COPY -> Q_KEY_CODE_COPY
KEY_OPEN -> Q_KEY_CODE_OPEN
KEY_PASTE -> Q_KEY_CODE_PASTE
KEY_CUT -> Q_KEY_CODE_CUT
KEY_HELP -> Q_KEY_CODE_HELP
KEY_MEDIA -> Q_KEY_CODE_MEDIASELECT
In addition, some fixes:
- KEY_PLAYPAUSE now maps to Q_KEY_CODE_AUDIOPLAY, instead of
KEY_PLAYCD. KEY_PLAYPAUSE is defined across almost all scancodes
sets, while KEY_PLAYCD only appears in AT set1, so the former is
a more useful mapping.
Missing entries in qcode_to_number now fixed:
Q_KEY_CODE_AGAIN -> 0x85
Q_KEY_CODE_PROPS -> 0x86
Q_KEY_CODE_UNDO -> 0x87
Q_KEY_CODE_FRONT -> 0x8c
Q_KEY_CODE_COPY -> 0xf8
Q_KEY_CODE_OPEN -> 0x64
Q_KEY_CODE_PASTE -> 0x65
Q_KEY_CODE_CUT -> 0xbc
Q_KEY_CODE_LF -> 0x5b
Q_KEY_CODE_HELP -> 0xf5
Q_KEY_CODE_COMPOSE -> 0xdd
Q_KEY_CODE_KP_EQUALS -> 0x59
Q_KEY_CODE_MEDIASELECT -> 0xed
In addition, some fixes:
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xdd) and is now mapped to 0x9e
- Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead
of to 0xe041 (Find)
- Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana)
instead of of 0x77 (Hirigana)
- Q_KEY_CODE_PRINT was mapped to 0xb7 which is not a defined
scan code in AT set 1, it is now mapped to 0x54 (sysrq)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The https://gitlab.com/keycodemap/keycodemapdb/ repo contains a
data file mapping between all the different scancode/keycode/keysym
sets that are known, and a tool to auto-generate lookup tables for
different combinations.
It is used by GTK-VNC, SPICE-GTK and libvirt for mapping keys.
Using it in QEMU will let us replace many hand written lookup
tables with auto-generated tables from a master data source,
reducing bugs. Adding new QKeyCodes will now only require the
master table to be updated, all ~20 other tables will be
automatically updated to follow.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-4-berrange@redhat.com
[ kraxel: fix build ]
[ kraxel: switch repo to qemu.git mirror ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also set saved handle to zero when removing without adding a new watch.
Signed-off-by: Brandon Carpenter <brandon.carpenter@cypherpath.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Trace anything related to authentication in the VNC protocol
handshake
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170921121528.23935-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Trace anything which opens/closes/wraps a QIOChannel in the
VNC server.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170921121528.23935-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rename the functions to to say "setup" instead of "create" because they
support being called multiple times on the same egl framebuffer.
Properly delete unused textures, update function interfaces to support
this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170927115031.12063-1-kraxel@redhat.com
Handle the translation from vga chars to curses chars in curses_update()
instead of console_write_ch(). Purge any curses support bits from
ui/console.h include file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170927103811.19249-1-kraxel@redhat.com
Tidy up some of the warn_report() messages after having converted them
to use warn_report().
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <9cb1d23551898c9c9a5f84da6773e99871285120.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using these commands:
find ./* -type f -exec sed -i \
'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
Indentation fixed up manually afterwards.
Some of the lines were manually edited to reduce the line length to below
80 charecters. Some of the lines with newlines in the middle of the
string were also manually edit to avoid checkpatch errrors.
The #include lines were manually updated to allow the code to compile.
Several of the warning messages can be improved after this patch, to
keep this patch mechanical this has been moved into a later patch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using this command:
find ./* -type f -exec sed -i \
's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \
{} +
Some of the lines were manually edited to reduce the line length to below
80 charecters.
The #include lines were manually updated to allow the code to compile.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some termcaps (found using SLES11SP1) use [? sequences. According to man
console_codes (http://linux.die.net/man/4/console_codes) the question mark
is a nop and should simply be ignored.
This patch does exactly that, rendering screen output readable when
outputting guest serial consoles to the graphical console emulator.
Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id: 20170829113818.42482-1-agraf@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
virtio-gpu can trigger the assert added by commit "6905b93447 console:
add same surface replace pre-condition" in multihead setups (where
surface can be NULL for secondary displays). Allow surface being NULL.
Fixes: 6905b93447
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170906142109.2685-1-kraxel@redhat.com
Drop pixman submodule and support for the "internal" pixman build.
pixman should be reasonably well established meanwhile so we don't
need the fallback submodule any more. While being at it also drop
some #ifdefs for pixman versions older than what we require in
configure anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170905140116.28181-2-kraxel@redhat.com
Currently, the FOO_lookup[] generated for QAPI enum types are
terminated by a NULL sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, replace "have we reached the sentinel?"
predicates by "have we reached the FOO__MAX value?" predicates.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-12-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Extract the (correct) cleaning code as a new function vnc_free_addresses() then
use it to remove the memory leaks.
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Both keys exist already: "ac_search" is "find" and "ac_stop" is "stop".
Fixes: 37810e8055
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170728063415.27480-1-kraxel@redhat.com
The SPICE input code is currently detcting 0xe1 0x1d 0x45 as
the PAUSE key make sequence and 0xe1 0x9d 0xc5 as the break
sequence. This is incorrect, because all 6 scancodes together
are the make sequence, and there is no break sequence.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170727174640.30359-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The processing of the scancodes for PAUSE/BREAK has been broken since
the conversion to qcodes in:
commit 8c10e0baf0
Author: Hervé Poussineau <hpoussin@reactos.org>
Date: Thu Sep 15 22:06:26 2016 +0200
ps2: use QEMU qcodes instead of scancodes
When using a VNC client, with the raw scancode extension, the client
will send a scancode of 0xc6 for both PAUSE and BREAK. There is mistakenly
no entry in the qcode_to_number table for this scancode, so
ps2_keyboard_event() just generates a log message and discards the
scancode
When using a SPICE client, it will also send 0xc6 for BREAK, but
will send 0xe1 0x1d 0x45 0xe1 0x9d 0xc5 for PAUSE. There is no
entry in the qcode_to_number table for the scancode 0xe1 because
it is a special XT keyboard prefix not mapping to any QKeyCode.
Again ps2_keyboard_event() just generates a log message and discards
the scancode. The following 0x1d, 0x45, 0x9d, 0xc5 scancodes get
handled correctly. Rather than trying to handle 3 byte sequences
of scancodes in the PS/2 driver, special case the SPICE input
code so that it captures the 3 byte pause sequence and turns it
into a Pause QKeyCode.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170727113243.23991-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The right alt key (alt_r aka KEY_RIGHTALT) is used for AltGr.
The altgr and altgr_r keys simply don't exist. Drop them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170727104720.30061-1-kraxel@redhat.com
Add multimedia keys to QKeyCodes and to the keymaps.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170726152918.11995-5-kraxel@redhat.com
Move from input-linux.c to input-keymap.c and export it,
so the function is available elsewhere too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170726152918.11995-3-kraxel@redhat.com
Page-up and Page-down were renamed. Add the names to the keysym list
so we can parse both old and new names. The keypad versions are already
present in the vnc map.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170726152918.11995-2-kraxel@redhat.com
The current VNC default keyboard delay is 1ms. With that we're constantly
typing faster than the guest receives keyboard events from an XHCI attached
USB HID device.
The default keyboard delay time in the input layer however is 10ms. I don't know
how that number came to be, but empirical tests on some OpenQA driven ARM
systems show that 10ms really is a reasonable default number for the delay.
This patch moves the VNC delay also to 10ms. That way our default is much
safer (good!) and also consistent with the input layer default (also good!).
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1499863425-103133-1-git-send-email-agraf@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The [NSEvent modifierFlags] method returns an NSEventModifierFlags type value in Mac OS 10.10. It use to be of type NSUInteger. Replacing NSEventModifierFlags with NSUInteger allows for the cooca.m file to be compiled on older versions of Mac OS. This patch was been tested on Mac OS 10.6 and Mac OS 10.12 without problem.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: F6C36C1A-4661-48F4-BEA6-3994889927D0@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Programs running inside of QEMU can sometimes use more CPU time than is really
needed. To solve this problem, we just need to throttle the virtual CPU. This
feature will stop laptops from burning up.
This patch adds a menu called Speed that has menu items from 100% to 1% that
represent the speed options. 100% is full speed and 1% is slowest.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: D6FAAABF-064D-49C0-B572-C73679F34052@gmail.com
[PMM: Moved "mark 100% menu item as checked initially" code to
after menu item is allocated, not before it]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a loop a few lines up counting consoles and setting
sdl2_num_outputs accordingly, so con ptr can't be NULL there.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170621122234.12751-1-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Delays in the input layer are special cased input events. Every input
event is accounted for in a global intput queue count. The special cased
delays however did not get removed from the queue, leading to queue overruns
and thus silent key drops after typing quite a few characters.
Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id: 1498117318-162102-1-git-send-email-agraf@suse.de
Fixes: be1a7176 ("input: add support for kbd delays")
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Drop commented debug logging, add trace points instead.
Also cleanup parser code a bit, the key name is copied into a new
variable instead of patching the input line, that way we can log
the unmodified line.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170606134736.26080-1-kraxel@redhat.com
-----BEGIN PGP SIGNATURE-----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=O9Vv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' into staging
QAPI patches for 2017-06-09
# gpg: Signature made Tue 20 Jun 2017 13:31:39 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits)
tests/qdict: check more get_try_int() cases
console: use get_uint() for "head" property
i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties
numa: use get_uint() for "size" property
pnv-core: use get_uint() for "core-pir" property
pvpanic: use get_uint() for "ioport" property
auxbus: use get_uint() for "addr" property
arm: use get_uint() for "mp-affinity" property
xen: use get_uint() for "max-ram-below-4g" property
pc: use get_uint() for "hpet-intcap" property
pc: use get_uint() for "apic-id" property
pc: use get_uint() for "iobase" property
acpi: use get_uint() for "pci-hole*" properties
acpi: use get_uint() for various acpi properties
acpi: use get_uint() for "acpi-pcihp-io*" properties
platform-bus: use get_uint() for "addr" property
bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base"
aspeed: use {set, get}_uint() for "ram-size" property
pcihp: use get_uint() for "bsel" property
pc-dimm: make "size" property uint64
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Looks like #include "hw/qdev.h" is not needed here, so remove it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1497894617-12143-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Drop the temporary workaround for the broken display updates.
All display adapters are updated, so this should be safe without
causing regressions.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20170614084538.32480-1-kraxel@redhat.com
Add a collection of egl_fb_*() helper functions to manage and use opengl
framebuffers, which is a common pattern in UI code with opengl support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170614084149.31314-2-kraxel@redhat.com
TYPE_QEMU_CONSOLE property "head" is defined with
object_property_add_uint*_ptr().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-41-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.
Add a few more tests while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Although the Qemu and spice flags currently have the same value, it
seems more correct to pass the spice flag values to
spice_server_kbd_leds(), especially considering that this function
already makes an effort to convert between the QEMU_*_LED and
SPICE_KEYBOARD_MODIFIER_* values.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170510202006.31737-1-jjongsma@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I had two problems with QEMU on macOS:
1) Sometimes when alt-tabbing to QEMU it would act as if the 'a' key
was pressed so I'd get 'aaaaaaaaa....'.
2) Using Sikuli to programatically send keys to the QEMU window text
like "foo_bar" would come out as "fooa-bar".
They looked similar and after much digging the problem turned out to be
the same. When QEMU's ui/cocoa.m received an NSFlagsChanged NSEvent it
looked at the keyCode to determine what modifier key changed. This
usually works fine but sometimes the keyCode is 0 and the app should
instead be looking at the modifierFlags bitmask. Key code 0 is the 'a'
key.
I added code that handles keyCode == 0 differently. It checks the
modifierFlags and if they differ from QEMU's idea of which modifier
keys are currently pressed it toggles those changed keys.
This fixes my problems and seems work fine.
Signed-off-by: Ian McKellar <ianloic@google.com>
Message-id: 20170526233816.47627-1-ianloic@google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move all the frontend struct and methods to a seperate unit. This avoids
accidentally mixing backend and frontend calls, and helps with readabilty.
Make qemu_chr_replay() a macro shared by both char and char-fe.
Export qemu_chr_write(), and use a macro for qemu_chr_write_all()
(nb: yes, CharBackend is for char frontend :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Time to wire up all the call sites that request a shutdown or
reset to use the enum added in the previous patch.
It would have been less churn to keep the common case with no
arguments as meaning guest-triggered, and only modified the
host-triggered code paths, via a wrapper function, but then we'd
still have to audit that I didn't miss any host-triggered spots;
changing the signature forces us to double-check that I correctly
categorized all callers.
Since command line options can change whether a guest reset request
causes an actual reset vs. a shutdown, it's easy to also add the
information to reset requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts]
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts]
Message-Id: <20170515214114.15442-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
ctpopl() has a better implementation than hweight_long() and ui/vnc.c
being the last user of hweight_long(), we can simply remove it.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1489415605-13105-1-git-send-email-clg@kaod.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is unnecessary to assign 'packed_bytes' to 'estimated_bytes', because 'estimated_bytes' unused after assignment.
Signed-off-by: Wei Qi <weiqi4@huawei.com>
Reviewed-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add egl-headless user interface. It doesn't provide a real user
interface, it only provides opengl support using drm render nodes.
It will copy back the bits rendered by the guest using virgl back
to a DisplaySurface and kick the usual display update code paths,
so spice and vnc and screendump can pick it up.
Use it this way:
qemu -display egl-headless -vnc $display
qemu -display egl-headless -spice gl=off,$args
Note that you should prefer native spice opengl support (-spice
gl=on) if possible because that delivers better performance.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170505104101.30589-7-kraxel@redhat.com
When running on gtk we need X11 platform not mesa platform.
Create separate functions for mesa and x11 so we can keep
the egl #ifdef mess local to egl-helpers.c
Fixes: 0ea1523fb6
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170505104101.30589-4-kraxel@redhat.com
Leftover from the early opengl days.
Unused now, so delete the dead code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170505104101.30589-3-kraxel@redhat.com
This patch adds support for absolute pointer events to the input-linux
subsystem. This support was omitted from the original input-linux patch,
however most of the code required for it is already in place.
Support for absolute events is especially useful for guests with vga
passthrough. Since they have a physical monitor, none of normal channels
for sending video output (vnc, etc) are used, meaning they also can't be
used to send absolute input events. This leaves QMP as the only option
to send absolute input into vga passthrough guests, which is not its
intended use and is not efficient.
This patch allows, for example, uinput to be used to create virtual
absolute input devices. This lets you build external systems which share
physical input devices between guests. Without absolute input
capability, such external systems can't seamlessly share pointer devices
between guests.
Signed-off-by: Philippe Voinov <philippevoinov@gmail.com>
Message-id: 20170505134231.30210-1-philippevoinov@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch refactors ui/input.c to support absolute axis
minimum values other than 0. All dependent calls to qemu_input_queue_abs
have been updated to explicitly supply 0 as the axis minimum value.
Signed-off-by: Philippe Voinov <philippevoinov@gmail.com>
Message-id: 20170505133952.29885-1-philippevoinov@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The function simply alias and hides the real event function.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
qemu_input_event_send() discards key event when the guest is paused,
but not the delay.
The delay ends up in the input queue, and qemu_input_event_send_key()
will further fill the queue with upcoming events.
VNC uses qemu_input_event_send_key_delay(), not SPICE, which results
in a different input behaviour on pause: VNC will queue the events
(except the first that is discarded), SPICE will discard all events.
Don't queue delay if paused, and provide same behaviour on SPICE and
VNC clients on resume (and potentially avoid over-allocating the
buffer queue)
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1444326
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170425130520.31819-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Apply a limit to the number of items we accept into the keyboard queue.
Impact: Without this limit vnc clients can exhaust host memory by
sending keyboard events faster than qemu feeds them to the guest.
Fixes: CVE-2017-8379
Cc: P J P <ppandit@redhat.com>
Cc: Huawei PSIRT <PSIRT@huawei.com>
Reported-by: jiangxin1@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170428084237.23960-1-kraxel@redhat.com
macOS 10.12 deprecated/replaced many AppKit constants to make naming
more consistent. Use the new constants, and #define them to the
old constants when compiling against a pre-10.12 SDK.
Signed-off-by: Brendan Shanks <brendan@bslabs.net>
Message-id: 20170425062952.99149-1-brendan@bslabs.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Catch an invalid state early, before a potential use-after-free. This is
mainly useful for documentation purposes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170406120513.638-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We have quite a few switches over SocketAddressKind. Some have case
labels for all enumeration values, others rely on a default label.
Some abort when the value isn't a valid SocketAddressKind, others
report an error then.
Unify as follows. Always provide case labels for all enumeration
values, to clarify intent. Abort when the value isn't a valid
SocketAddressKind, because the program state is messed up then.
Improve a few error messages while there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1490895797-29094-4-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Certain features make sense only with certain address families. For
instance, passing file descriptors requires AF_UNIX. Testing
SocketAddress's saddr->type == SOCKET_ADDRESS_KIND_UNIX is obvious,
but problematic: it can't recognize AF_UNIX when type ==
SOCKET_ADDRESS_KIND_FD.
Mark such tests of saddr->type TODO. We may want to check the address
family with getsockname() there.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-2-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The evdev devices in input-linux.c are read in blocks of one whole
event. If there are not enough bytes available, they are discarded,
instead of being kept for the next read operation. This results in
lost events, of even non-working devices.
This patch keeps track of the number of bytes to be read to fill up
a whole event, and then handle it.
Changes from v1 to v2:
- Fix: Calculate offset on each iteration
Changes from v2 to v3:
- Fix coding style
- Store offset instead of bytes to be read
Signed-off-by: Javier Celaya <jcelaya@gmail.com>
Message-id: 20170327182624.2914-1-jcelaya@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The previous commit (8bb93c6f99) using async_safe_run_on_cpu() doesn't
work on graphics sub-system which restrict which threads can do GUI
updates. Rather the special casing MacOS we just directly call the
helper and move all the exclusive handling into do_dafe_dpy_refresh().
The unfortunate bouncing of the BQL is to ensure there is no deadlock
as vCPUs waiting on the BQL are kicked into their quiescent state.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
I missed the fact that when an exclusive work item runs it drops the
BQL to ensure all no vCPUs are stuck waiting for it, hence causing a
deadlock. However the actual helper needs to take the BQL especially
as we'll be messing with device emulation bits during the update which
all assume BQL is held.
We make a minor cpu_reloading_memory_map which must try and unlock the
RCU if we are actually outside the running context.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
vnc server in reverse mode (qemu -vnc localhost:$nr,reverse) interprets
$nr as display number (i.e. with 5900 offset) in recent qemu versions.
Historical and documented behavior is interpreting $nr as port number
though. So we should bring code and documentation in line.
Given that default listening port for viewers is 5500 the 5900 offset is
pretty inconvinient, because it is simply impossible to connect to port
5500. So, lets fix the code not the docs.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1489480018-11443-1-git-send-email-kraxel@redhat.com
Unfortunaly switching to getPlatformDisplayEXT isn't as easy as
implemented by 0ea1523fb6. See the
longish comment for the complete story.
Cc: Frediano Ziglio <fziglio@redhat.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489997042-1824-1-git-send-email-kraxel@redhat.com
... and drop OPENGL_CFLAGS from Makefiles.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1490079888-29029-1-git-send-email-kraxel@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 8d04fb55..
tcg: drop global lock during TCG code execution
..broke the assumption that updates to the GUI couldn't happen at the
same time as TCG vCPUs where running. As a result the TCG vCPU could
still be updating a directly mapped frame-buffer while the display
side was updating. This would cause artefacts to appear when the
update code assumed that memory block hadn't changed.
The simplest solution is to ensure the two things can't happen at the
same time like the old BQL locking scheme. Here we use the solution
introduced for MTTCG and schedule the update as async_safe_work when
we know no vCPUs can be running.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20170315144825.3108-1-alex.bennee@linaro.org
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[ kraxel: updated comment clarifying the display adapters are buggy
and this is a temporary workaround ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is a special code path (dpy_gfx_copy) to allow graphic emulation
notify user interface code about bitblit operations carryed out by
guests. It is supported by cirrus and vnc server. The intended purpose
is to optimize display scrolls and just send over the scroll op instead
of a full display update.
This is rarely used these days though because modern guests simply don't
use the cirrus blitter any more. Any linux guest using the cirrus drm
driver doesn't. Any windows guest newer than winxp doesn't ship with a
cirrus driver any more and thus uses the cirrus as simple framebuffer.
So this code tends to bitrot and bugs can go unnoticed for a long time.
See for example commit "3e10c3e vnc: fix qemu crash because of SIGSEGV"
which fixes a bug lingering in the code for almost a year, added by
commit "c7628bf vnc: only alloc server surface with clients connected".
Also the vnc server will throttle the frame rate in case it figures the
network can't keep up (send buffers are full). This doesn't work with
dpy_gfx_copy, for any copy operation sent to the vnc client we have to
send all outstanding updates beforehand, otherwise the vnc client might
run the client side blit on outdated data and thereby corrupt the
display. So this dpy_gfx_copy "optimization" might even make things
worse on slow network links.
Lets kill it once for all.
Oh, and one more reason: Turns out (after writing the patch) we have a
security bug in that code path ...
Fixes: CVE-2016-9603
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489494419-14340-1-git-send-email-kraxel@redhat.com
Add the ability for the user to use .toast files with QEMU. This format works
just like ISO files.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 0C9DA454-E3DC-4291-806E-9A96557DE833@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
XkbGetKeyboard does not work in XWayland and even on non-Wayland
X11 servers its use is discouraged:
https://bugs.freedesktop.org/show_bug.cgi?id=89240
This resolves a problem whereby QEMU prints
"could not lookup keycode name"
on startup when running under XWayland. Keymap handling is
however still broken after this commit, since Xwayland is
reporting a keymap we can't handle
"unknown keycodes `(unnamed)', please report to qemu-devel@nongnu.org"
NB, native Wayland support (which is the default under GTK3) is
not affected - only XWayland (which can be requested with GDK_BACKEND
on GTK3, and is the only option for GTK2).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170227132343.30824-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Helper function (and DisplayChangeListenerOps ptr) to disable scanouts.
Replaces using dpy_gl_scanout_texture with 0x0 size and no texture
specified.
Allows cleanups to make the io and gfx emulation code more readable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487669841-13668-3-git-send-email-kraxel@redhat.com
We'll add a variant which accepts dmabufs soon. Change
the name so we can easily disturgish the two variants.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487669841-13668-2-git-send-email-kraxel@redhat.com
When multiple GPU are available, picking the first one isn't always the
best choice. Learn to specify a device rendernode.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170212112118.16044-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This change allows the listen address and websocket address
options for -vnc to be repeated. This causes the VNC server
to listen on multiple addresses. e.g.
$ $QEMU -vnc vnc=localhost:1,vnc=unix:/tmp/vnc,\
websocket=127.0.0.1:8080,websocket=[::]:8081
results in listening on
127.0.0.1:5901, 127.0.0.1:8080, ::1:5901, :::8081 & /tmp/vnc
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-9-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove the limitation that the VNC server can only listen on
a single resolved IP address. This uses the new DNS resolver
API to resolve a SocketAddress struct into an array of
SocketAddress structs containing raw IP addresses. The VNC
server will then attempt to listen on all resolved IP addresses.
The server must successfully listen on at least one of the
resolved IP addresses, otherwise an error will be reported.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-7-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code which takes a SocketAddress and connects/listens on the
network is going to get more complicated to deal with multiple
listeners. Pull it out into a separate method to avoid making the
vnc_display_open method even more complex.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-6-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code which interprets the CLI args to populate the SocketAddress
objects for plain & websockets VNC is quite complex already and will
need further enhancements shortly. Refactor it into separate methods
to avoid vnc_display_open getting even larger. As a side effect of
the refactoring, it is now possible to specify a listen address for
the websocket server explicitly. e.g,
-vnc localhost:5900,websockets=0.0.0.0:8080
will listen on localhost for the plain VNC server, but expose the
websockets VNC server on the public interface. This refactoring
also removes the restriction that prevents enabling websockets
when the plain VNC server is listening on a UNIX socket.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-5-berrange@redhat.com
[ kraxel: squashed clang build fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently there is only a single listener for plain VNC and
a single listener for websockets VNC. This means that if
getaddrinfo() returns multiple IP addresses, for a hostname,
the VNC server can only listen on one of them. This is
just bearable if listening on wildcard interface, or if
the host only has a single network interface to listen on,
but if there are multiple NICs and the VNC server needs
to listen on 2 or more specific IP addresses, it can't be
done.
This refactors the VncDisplay state so that it holds an
array of listening sockets, but still only listens on
one socket.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the VNC authentication info is emitted at the
top level of the query-vnc-servers data. This is wrong
because the authentication scheme differs between plain
and websockets when TLS is enabled. We should instead
report auth against the individual servers. e.g.
(QEMU) query-vnc-servers
{
"return": [
{
"clients": [],
"id": "default",
"auth": "vencrypt",
"vencrypt": "x509-vnc",
"server": [
{
"host": "127.0.0.1"
"service": "5901",
"websocket": false,
"family": "ipv4",
"auth": "vencrypt",
"vencrypt": "x509-vnc"
},
{
"host": "127.0.0.1",
"service": "5902",
"websocket": true,
"family": "ipv4",
"auth": "vnc"
}
]
}
]
}
This also future proofs the QMP schema so that we can
cope with multiple VNC server instances, listening on
different interfaces or ports, with different auth
setup.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The -vnc argument is documented as accepting two syntaxes for
the 'websocket' option, either a bare option name, or a port
number. If using the bare option name, it is supposed to apply
the display number as an offset to base port 5700. e.g.
-vnc localhost:3,websocket
should listen on port 5703, however, this was broken in 2.3.0 since
commit 4db14629c3
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Tue Sep 16 12:33:03 2014 +0200
vnc: switch to QemuOpts, allow multiple servers
instead qemu tries to listen on port "on" which gets looked up in
/etc/services and fails.
Fixes bug: #1455912
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When qemu vnc server is trying to send large update to clients,
there might be a situation when system responds with something
like EAGAIN, indicating that there's no system memory to send
that much data (depending on the network speed, client and server
and what is happening). In this case, something like this happens
on qemu side (from strace):
sendmsg(16, {msg_name(0)=NULL,
msg_iov(1)=[{"\244\"..., 729186}],
msg_controllen=0, msg_flags=0}, 0) = 103950
sendmsg(16, {msg_name(0)=NULL,
msg_iov(1)=[{"lz\346"..., 1559618}],
msg_controllen=0, msg_flags=0}, 0) = -1 EAGAIN
sendmsg(-1, {msg_name(0)=NULL,
msg_iov(1)=[{"lz\346"..., 1559618}],
msg_controllen=0, msg_flags=0}, 0) = -1 EBADF
qemu closes the socket before the retry, and obviously it gets EBADF
when trying to send to -1.
This is because there WAS a special handling for EAGAIN, but now it doesn't
work anymore, after commit 04d2529da2, because
now in all error-like cases we initiate vnc disconnect.
This change were introduced in qemu 2.6, and caused numerous grief for many
people, resulting in their vnc clients reporting sporadic random disconnects
from vnc server.
Fix that by doing the disconnect only when necessary, i.e. omitting this
very case of EAGAIN.
Hopefully the existing condition (comparing with QIO_CHANNEL_ERR_BLOCK)
is sufficient, as the original code (before the above commit) were
checking for other errno values too.
Apparently there's another (semi?)bug exist somewhere here, since the
code tries to write to fd# -1, it probably should check if the connection
is open before. But this isn't important.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1486115549-9398-1-git-send-email-mjt@msgid.tls.msk.ru
Fixes: 04d2529da2
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The functions vnc_has_job() and vnc_jobs_clear() are
never used; remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 1486146260-8092-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>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=YkDp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/chr-split-pull-request' into staging
# gpg: Signature made Tue 31 Jan 2017 19:32:40 GMT
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/chr-split-pull-request: (41 commits)
char: headers clean-up
char: move parallel chardev in its own file
char: move serial chardev to its own file
char: move pty chardev in its own file
char: move pipe chardev in its own file
char: move console in its own file
char: move stdio in its own file
char: move file chardev in its own file
char: move udp chardev in its own file
char: move socket chardev to its own file
char: move win-stdio into its own file
char: move win chardev base class in its own file
char: move fd chardev in its own file
char: move QIOChannel-related stuff to char-io.h
char: remove unused READ_RETRIES
char: rename and move to header CHR_READ_BUF_LEN
char: move ringbuf/memory to its own file
char: move mux to its own file
char: move null chardev to its own file
char: make null_chr_write() the default method
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Only skip surface reallocation in case the old surface was created using
qemu_alloc_display (via qemu_create_displaysurface) too, otherwise we
might end up with a DisplaySurface with the wrong backing storage.
Cc: 1658634@bugs.launchpad.net
Fixes: cd958edb1f
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1485256239-12219-1-git-send-email-kraxel@redhat.com
Commit 2cb5d2a4 removed setlocale() for everything except LC_MESSAGES in
order to avoid unwanted side effects such as using the wrong decimal
separator in generated JSON objects. However, the problem that unsetting
LC_CTYPE caused is that non-ASCII characters are considered
non-printable now and therefore the GTK menus display question marks for
accented letters, Chinese characters etc.
A first attempt to fix this [1] was rejected because even just setting
LC_CTYPE to the user's locale (and thereby modifying the semantics of
the ctype.h functions) could have unwanted effects that we're not aware
of yet.
Recently, however, glibc introduced a new locale "C.utf-8" that just
uses UTF-8 as its charset, but otherwise leaves the semantics alone.
Just setting the right character set is enough for our use case, so we
can just hardcode this one without having to be afraid of nasty side
effects.
Older systems that don't have the new locale will continue displaying
question marks, but this should fix the problem for most users.
[1] https://lists.gnu.org/archive/html/qemu-devel/2015-12/msg03591.html
('Re: gtk: use setlocale() for LC_MESSAGES only')
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170131100945.8189-1-kwolf@redhat.com
[ kraxel: change C.utf-8 to C.UTF-8 ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The class kind is necessary to lookup the chardev name in
qmp_chardev_add() after calling qemu_chr_new_from_opts() and to set
the appropriate ChardevBackend (mainly to free the right
fields).
qemu_chr_new_from_opts() can be changed to use a non-qmp function
using the chardev class typename. Introduce qemu_chardev_add() to be
called from qemu_chr_new_from_opts() and remove the class chardev kind
field. Set the backend->type in the parse callback (when non-common
fields are added).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu_chr_new_from_opts() is modified to not need CharDriver backend[]
array, but uses instead objectified qmp_query_chardev_backends() and
char_get_class(). The alias field is moved outside in a ChardevAlias[],
similar to QDevAlias for devices.
"kind" and "parse" are moved to ChardevClass ("kind" is to be removed
next)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit "bea60dd ui/vnc: fix potential memory corruption issues" is
incomplete. vnc_update_stats must calculate width and height the same
way vnc_refresh_server_surface does it, to make sure we don't use width
and height values larger than the qemu vnc server can handle.
Commit "e22492d ui/vnc: disable adaptive update calculations if not
needed" masks the issue in the default configuration. It triggers only
in case the "lossy" option is set to "on" (default is "off").
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1485248428-575-1-git-send-email-kraxel@redhat.com
Without it, server-mode mouse is "slow" to update position: QXL will
wait until new display commands come. This is very visible with
virtio-gpu.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170130104540.14660-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Solving wishlist item at
https://bugs.launchpad.net/qemu/+bug/1656710
by accepting Ctrl-Alt-= as an additional zoom-in acceleration.
Using gtk_accel_group_connect to support multiple accelerations
triggering a single menu item since that gtk_accel_map_add_entry
seems to support only one acceleration. A wrapper function
gd_accel_zoom_in is added to support gtk_accel_group_connect's
callback activities.
Signed-off-by: Ziyue Yang <skiver.cloud.yzy@gmail.com>
Message-id: 1485826335-15686-1-git-send-email-skiver.cloud.yzy@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When building qemu after setting _VNC_DEBUG to 1 (see ui/vnc.h),
we get the following error and the build breaks:
...
ui/vnc.c: In function ‘vnc_client_io_error’:
ui/vnc.c:1262:13: error: format ‘%d’ expects argument of type ‘int’, but
VNC_DEBUG("Closing down client sock: ret %d (%s)\n",
^
cc1: all warnings being treated as errors
make: *** [ui/vnc.o] Error 1
...
This patch solves this issue by fixing the print format specifier
in vnc_client_io_error() to be %zd, which corresponds to the type
of the "ret" variable.
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Message-id: 1484039965-25907-1-git-send-email-rami.rosen@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On 3.4.0 or later, send GDK_SCROLL_SMOOTH event, instead of
GDK_SCROLL_UP/DOWN.
This fixes it by converting any smooth scroll to up/down.
(I.e. without smooth support)
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Turn Chardev into Object.
qemu_chr_alloc() is replaced by the qemu_chardev_new() constructor. It
will call qemu_char_open() to open/intialize the chardev with the
ChardevCommon *backend settings.
The CharDriver::create() callback is turned into a ChardevClass::open()
which is called from the newly introduced qemu_chardev_open().
"chardev-gdb" and "chardev-hci" are internal chardev and aren't
creatable directly with -chardev. Use a new internal flag to disable
them. We may want to use TYPE_USER_CREATABLE interface instead, or
perhaps allow -chardev usage.
Although in general we keep typename and macros private, unless the type
is being used by some other file, in this patch, all types and common
helper macros for qemu-char.c are in char.h. This is to help transition
now (some types must be declared early, while some aren't shared) and
when splitting in several units. This is to be improved later.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vc_chr_write() is more appropriate than _puts() since no newline is
appended, even though it's not used only as a callback.
Keep "qemu_chr_parse" prefix, most chardev parse functions use this
prefix atm.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of registering a vc handler to allocate the Gtk VC Chardev,
overwrite the console.c char driver.
A later patch, when switching to QOM, will register a default console vc
QOM class if none has been registered before.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pick a uniform chardev type name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a single allocation for CharDriverState, this avoids extra
allocations & pointers, and is a step towards more object-oriented
CharDriver.
Gtk console is a bit peculiar, gd_vc_chr_set_echo() used to have a
temporary VirtualConsole to save the echo bit. Instead now, we consider
whether vcd->console is set or not, and restore the echo bit saved in
VCDriverState when calling gd_vc_vte_init().
The casts added are temporary, they are replaced with QOM type-safe
macros in a later patch in this series.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes the code more declarative, and avoids duplicating the
information on all instances.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to allocate & copy fields, let's use static const struct instead.
Add an alias field to the CharDriver structure to cover the cases where
we previously registered a driver twice under two names.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the QIOTaskFunc signature takes an Object * for
the source, and an Error * for any error. We also need to
be able to provide a result pointer. Rather than continue
to add parameters to QIOTaskFunc, remove the existing
ones and simply pass the QIOTask object instead. This
has methods to access all the other data items required
in the callback impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Cc: Stefan Weil <sw@weilnetz.de>
Cc: Samuel Thibault <samuel.thibault@gnu.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1484295285-8809-1-git-send-email-kraxel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With "ps2: use QEMU qcodes instead of scancodes", key handling was
changed to qcode base. But all scancodes are not converted to new one.
This adds some missing qcodes/scancodes what I found in using.
[set1 and set3 are from <hpoussin@reactos.org>]
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For builds with Mingw-w64 as it is included in Cygwin, there are two
header files which define KEY_EVENT with different values.
This results in lots of compiler warnings like this one:
CC vl.o
In file included from /qemu/include/ui/console.h:340:0,
from /qemu/vl.c:76:
/usr/i686-w64-mingw32/sys-root/mingw/include/curses.h:1522:0: warning: "KEY_EVENT" redefined
#define KEY_EVENT 0633 /* We were interrupted by an event */
In file included from /usr/share/mingw-w64/include/windows.h:74:0,
from /usr/share/mingw-w64/include/winsock2.h:23,
from /qemu/include/sysemu/os-win32.h:29,
from /qemu/include/qemu/osdep.h:100,
from /qemu/vl.c:24:
/usr/share/mingw-w64/include/wincon.h:101:0: note: this is the location of the previous definition
#define KEY_EVENT 0x1
QEMU only uses the KEY_EVENT macro from wincon.h.
Therefore we can undefine the macro coming from curses.h.
The explicit include statement for curses.h in ui/curses.c is not needed
and was removed.
Those two modifications fix the redefinition warnings.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20161119185318.10564-1-sw@weilnetz.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the buffer is not big enough, snprintf() does not return the number
of bytes that have been written to the buffer, but the number of bytes
that would be needed for writing the whole string. By using this value
for the following vnc_write() calls, we send some junk at the end of
the name in case the qemu_name is longer than 1017 bytes, which could
confuse the VNC clients. Fix this by adding an additional size check
here.
Buglink: https://bugs.launchpad.net/qemu/+bug/1637447
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1479749115-21932-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When too many consoles are created, vcs[] may be write out-of-bounds.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20161207105511.25173-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The relicense permits sharing the code with Spice which
is LGPL.
All people listed below have agreed to the
relicense:
- Arei Gonglei;
- Cole Robinson;
- Gerd Hoffmann;
- Peter Maydell.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Cole Robinson <crobinso@redhat.com>
Acked-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20161208104539.3045-1-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This uses the console API to record the window ID of the SDL2 windows.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20161221003806.22412-4-samuel.thibault@ens-lyon.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This moves the SDL bits for window ID from the baum driver to SDL, as
well as fixing the build for non-X11.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20161221003806.22412-3-samuel.thibault@ens-lyon.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This adds two console functions, qemu_console_set_window_id and
qemu_graphic_console_get_window_id, to let graphical backend record the
window id in the QemuConsole structure, and let the baum driver read it.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20161221003806.22412-2-samuel.thibault@ens-lyon.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Wayland always uses evdev as its input source, so QEMU
can use the existing evdev keymap data
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20161201094117.16407-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch fixes a segfault at QEMU startup, introduced in a08156321a.
gd_vc_find_current() return NULL, which is dereferenced without checking it.
While at it, disable the whole 'View' menu if no console exists.
Reproducer: qemu-system-i386 -M none -nodefaults
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1483263585-8101-1-git-send-email-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The "Copy" menu item copies VTE terminal text to the clipboard. This
only works with VTE terminals, not with graphics consoles.
Disable the menu item when the current notebook page isn't a VTE
terminal.
This patch fixes a segfault. Reproducer: Start QEMU and click the Copy
menu item when the guest display is visible.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20161214142518.10504-1-stefanha@redhat.com
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
GDK_KEY_Delete is only defined with gtk version 2.22 and newer,
on older versions this key was called GDK_Delete instead.
Since this is the case for all GDK_KEY_* defines, change the
already existing preprocessor check there to test for version 2.22,
so we know that we can remove this code block in case we require
that version as a minimum one day.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1478081328-25515-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----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=gsxL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-2016-10-27-1' into staging
Merge qio 2016/10/27 v1
# gpg: Signature made Thu 27 Oct 2016 13:54:03 BST
# gpg: using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/pull-qio-2016-10-27-1:
main: set names for main loop sources created
vnc: set name for all I/O channels created
migration: set name for all I/O channels created
char: set name for all I/O channels created
nbd: set name for all I/O channels created
io: add ability to set a name for IO channels
io: Add a QIOChannelSocket cleanup test
io: set LISTEN flag explicitly for listen sockets
io: Introduce a qio_channel_set_feature() helper
io: Use qio_channel_has_feature() where applicable
io: Fix double shift usages on QIOChannel features
Conflicts:
qemu-char.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In default VGA font, left/right arrow are glyphs 0x1a and 0x1b, not 0x0a and
0x0b.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20161015195308.20473-2-samuel.thibault@ens-lyon.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GTK generates key events for the delete key with key->string[0] = 0x7f
... but this does not work right with the readline_handle_byte()
function in util/readline.c, since this treats the keycode 127 as
backspace. So let's add a special case for the GTK delete key to make
this key behave right in the monitor interface of the GTK ui.
Buglink: https://bugs.launchpad.net/qemu/+bug/1619438
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1477570647-7100-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
gdk_screen_get_width() is deprecated since gtk 3.22.2, use
gdk_monitor_get_geometry() instead if it's available.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20161026152108.12364-1-berto@igalia.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Ensure that all I/O channels created for VNC are given names
to distinguish their respective roles.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It's only used in qmp_chardev_add(), so use a create() argument instead.
Also switched to typedef functions for CharDriverParse/CharDriverCreate.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022100951.19562-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the hanlders are associated with a CharBackend, rather than the
CharDriverState, it is more appropriate to store in CharBackend. This
avoids the handler copy dance in qemu_chr_fe_set_handlers() then
mux_chr_update_read_handler(), by storing the CharBackend pointer
directly.
Also a mux CharDriver should go through mux->backends[focused], since
chr->be will stay NULL. Before that, it was possible to call
chr->handler by mistake with surprising results, for ex through
qemu_chr_be_can_write(), which would result in calling the last set
handler front end, not the one with focus.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-22-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CharDriverState.init() callback is no longer set since commit
a61ae7f88c and thus unused. The only user, the malta FGPA display has
been converted to use an event "opened" callback instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It can't guarantee all cipher modes are supported
if one cipher algorithm is supported by a backend.
Let's extend qcrypto_cipher_supports() to take both
the algorithm and mode as parameters.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Query input device keys, initialize state accordingly, so the correct
state is reflected in case any key is pressed at initialization time.
There is a high chance for this to actually happen for the 'enter' key
in case you start qemu with a terminal command (directly or virsh).
When finding any pressed keys the input grab is delayed until all keys
are lifted, to avoid confusing guest and host with appearently stuck
keys.
Reported-by: Muted Bytes <mutedbytes@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1476277384-30365-1-git-send-email-kraxel@redhat.com
Rename the vnc_init_state method to reflect what its actual
purpose is, to discourage future devs from using it for more
general state initialization.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-10-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Most of the fields in VncState are initialized in the
vnc_connect() method, but some are done in vnc_init_state()
instead.
The purpose of having vnc_init_state() is to delay starting
of the VNC wire protocol until after the websockets handshake
has completed. As such the vnc_init_state() method only needs
to be used for initialization that is dependant on the wire
protocol running.
This also lets us get rid of the initialized boolean flag
from the VncState struct.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-9-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vnc_init_state method calls reset_keys() to reset the
modifier key state. This was originally added in
commit 53762ddb27
Author: malc <malc@c046a42c-6fe2-441c-8c8c-71466251a162>
Date: Mon Dec 1 20:57:52 2008 +0000
Reset the key modifiers upon client connect
This was valid at this time because there was only the
single VncState object which was persistent across client
connections and so needed resetting.
The persistent data was later split off into VncDisplay
and VncState was allocated at time of client connection:
commit 753b405331
Author: aliguori <aliguori@c046a42c-6fe2-441c-8c8c-71466251a162>
Date: Mon Feb 16 14:59:30 2009 +0000
Support multiple VNC clients (Brian Kress)
at which point the modifier state is always 0 due to
use of g_new0. As such the reset_keys() call has been
a no-op ever since.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-8-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Just before accepting a new client connection the vnc_listen_io
method calls graphic_hw_update(). This is bogus because there
is a call to this method already in vnc_state_init() and the
client doesn't need up2date graphics console before reaching
that.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-7-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is a lot of repeated code in the auth type setup method,
particularly around checking TLS credential types. Refactor
it to reduce duplication and instead of having one method
do both plain and websockets at once, call it separately
for each.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-6-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Normally code declares 'VncDisplay *vd' or 'VncState *vs'
but there are a bunch of places which misleadingly declare
'VncDisplay *vs'.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-5-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'ws_tls' field in VncState is only ever representing
the result of 'tlscreds != NULL' and is thus pointless.
Replace use of 'ws_tls' with a direct check against
'tlscreds'
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-4-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'ws_enabled' field is never used outside of the
vnc_display_open method, so can be a local variable.
The 'enabled' field is easily replaced by a check
for whether 'lsock' is non-NULL.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-3-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The last line in vnc_init_state() says
/* vs might be free()ed here */
This was added in
commit 198a0039c5
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Tue Jun 16 14:19:48 2009 +0200
vnc: rework VncState release workflow.
because the preceeding 'vnc_update_client()' could indeed
release the VncState instance.
The call to vnc_update_client() was removed not long after
though in
commit 1fc624122f
Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Date: Mon Aug 3 10:54:32 2009 +0100
single vnc server surface
and so the comment has been wrong ever since
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-2-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Merge what is left of qemu-tech into the main manual as an appendix.
Ultimately we should have a new internals manual built from docs/, and
then the "Translator Internals" parts of qemu-tech could move to docs/
as well. The bits on limitation and features of CPU emulation should
remain in qemu-doc.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When enabling the sanitizer build it will complain about control
reaching a non-void function. Normally the compiler should detect that
there is only one possible exit given a static VNC_SERVER_FB_BYTES.
As we always expect a static VNC_SERVER_FB_BYTES I've added a compile
time assert and just called the sub-function directly.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This switches over spice (in opengl mode) to render DisplaySurface
updates into a opengl texture, using the helper functions in
ui/console-gl.c. With this patch applied spice (with gl=on) will
stop using qxl rendering ops, it will use dma-buf passing all the
time, i.e. for bios/bootloader (before virtio-gpu driver is loaded)
too.
This should improve performance even using spice (with gl=on) with
non-accelerated stdvga because we stop squeezing all display updates
through a unix/tcp socket and basically using a shared memory transport
instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474617028-3979-3-git-send-email-kraxel@redhat.com
Keep track of gl_block state (added in bba19b8 console: block rendering
until client is done) in QemuConsole and allow to query it. This way
we can avoid state inconsistencies in case different code paths make use
of this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1474617028-3979-2-git-send-email-kraxel@redhat.com
virtio-gpu does a set-scanout at each frame (it might be a driver
regression). qemu_console_resize() recreate a surface even if the size
didn't change, and this shows up in profiling reports because the
surface is cleared. With this patch, I get a +15-20% glmark2
improvement.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20160826094711.14470-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=JG9f
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 23 Sep 2016 12:59:46 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (33 commits)
block: Remove BB interface from blockdev-add/del
qemu-iotests/141: Avoid blockdev-add with id
block: Avoid printing NULL string in error messages
qemu-iotests/139: Avoid blockdev-add with id
qemu-iotests/124: Avoid blockdev-add with id
qemu-iotests/118: Avoid blockdev-add with id
qemu-iotests/117: Avoid blockdev-add with id
qemu-iotests/087: Avoid blockdev-add with id
qemu-iotests/081: Avoid blockdev-add with id
qemu-iotests/071: Avoid blockdev-add with id
qemu-iotests/067: Avoid blockdev-add with id
qemu-iotests/041: Avoid blockdev-add with id
qemu-iotests/118: Test media change with qdev name
block: Accept device model name for block_set_io_throttle
block: Accept device model name for blockdev-change-medium
block: Accept device model name for eject
block: Accept device model name for x-blockdev-remove-medium
block: Accept device model name for x-blockdev-insert-medium
block: Accept device model name for blockdev-open/close-tray
qdev-monitor: Add blk_by_qdev_id()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to remove the need for BlockBackend names in the external API,
we want to allow qdev device names in all device related commands.
This converts blockdev-change-medium to accept a qdev device name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to remove the need for BlockBackend names in the external API,
we want to allow qdev device names in all device related commands.
This converts eject to accept a qdev device name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Update all qemu_uuid users as well, especially get rid of the duplicated
low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API.
Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to
QemuUUID is done here too to keep everything in sync and avoid code
churn.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
In the QEMU monitor pane of the gtk user interface, the backspace
key is not working at all. This happens because of a missing mapping
of the key in the qcode_to_keysym[] table. Thus let's add an entry
there to get the backspace key working again.
Buglink: https://bugs.launchpad.net/qemu/+bug/1611979
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The about dialog in QEMU on Mac OS X is very plain and unhelpful. This patch
makes the about dialog look a lot better and have some descriptive information
on what version of QEMU the user is running.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ED59936E-3EB2-46AB-9E33-AB26E382B884@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity identifies that at the top of the while(1) loop
in curses_refresh() the variable nextchr is always ERR,
and so the else case of the first if() is dead code.
Remove this dead code, and narrow the scope of the
nextchr variable to the place where it's used.
(This confused logic has been present since the curses
code was added to QEMU in 2008.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1470925407-23850-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Coverity spots that there is no bounds check before we
access the curses2qemu[] array. Add one, bringing this
code path into line with the one that looks up entries
in curses2keysym[].
In theory getch() shouldn't return out of range keycodes,
but it's better not to assume this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1470925407-23850-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In previous commit
commit c7628bff41
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Fri Oct 30 12:10:09 2015 +0100
vnc: only alloc server surface with clients connected
the VNC server was changed so that the 'vd->server' pixman
image was only allocated when a client is connected.
Since then if a client disconnects and then reconnects to
the VNC server all they will see is a black screen until
they do something that triggers a refresh. On a graphical
desktop this is not often noticed since there's many things
going on which cause a refresh. On a plain text console it
is really obvious since nothing refreshes frequently.
The problem is that the VNC server didn't update the guest
dirty bitmap, so still believes its server image is in sync
with the guest contents.
To fix this we must explicitly mark the entire guest desktop
as dirty after re-creating the server surface. Move this
logic into vnc_update_server_surface() so it is guaranteed
to be call in all code paths that re-create the surface
instead of only in vnc_dpy_switch()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Tested-by: Peter Lieven <pl@kamp.de>
Message-id: 1471365032-18096-1-git-send-email-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1470224274-31522-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The connection sharing / limits are only set in the
vnc_display_open() method and so missed when VNC is running
with '-vnc none'. This in turn prevents clients being added
to the VNC server with the QMP "add_client" command.
This was introduced in
commit e5f34cdd2d
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Thu Oct 2 12:09:34 2014 +0200
vnc: track & limit connections
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1470134726-15697-4-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vnc_server_info_get will allocate the VncServerInfo
struct and then call vnc_init_basic_info_from_server_addr
to populate the basic fields. If this returns an error
though, the qapi_free_VncServerInfo call will then crash
because the VncServerInfo struct instance was not properly
NULL-initialized and thus contains random stack garbage.
#0 0x00007f1987c8e6f5 in raise () at /lib64/libc.so.6
#1 0x00007f1987c902fa in abort () at /lib64/libc.so.6
#2 0x00007f1987ccf600 in __libc_message () at /lib64/libc.so.6
#3 0x00007f1987cd7d4a in _int_free () at /lib64/libc.so.6
#4 0x00007f1987cdb2ac in free () at /lib64/libc.so.6
#5 0x00007f198b654f6e in g_free () at /lib64/libglib-2.0.so.0
#6 0x0000559193cdcf54 in visit_type_str (v=v@entry=
0x5591972f14b0, name=name@entry=0x559193de1e29 "host", obj=obj@entry=0x5591961dbfa0, errp=errp@entry=0x7fffd7899d80)
at qapi/qapi-visit-core.c:255
#7 0x0000559193cca8f3 in visit_type_VncBasicInfo_members (v=v@entry=
0x5591972f14b0, obj=obj@entry=0x5591961dbfa0, errp=errp@entry=0x7fffd7899dc0) at qapi-visit.c:12307
#8 0x0000559193ccb523 in visit_type_VncServerInfo_members (v=v@entry=
0x5591972f14b0, obj=0x5591961dbfa0, errp=errp@entry=0x7fffd7899e00) at qapi-visit.c:12632
#9 0x0000559193ccb60b in visit_type_VncServerInfo (v=v@entry=
0x5591972f14b0, name=name@entry=0x0, obj=obj@entry=0x7fffd7899e48, errp=errp@entry=0x0) at qapi-visit.c:12658
#10 0x0000559193cb53d8 in qapi_free_VncServerInfo (obj=<optimized out>) at qapi-types.c:3970
#11 0x0000559193c1e6ba in vnc_server_info_get (vd=0x7f1951498010) at ui/vnc.c:233
#12 0x0000559193c24275 in vnc_connect (vs=0x559197b2f200, vs=0x559197b2f200, event=QAPI_EVENT_VNC_CONNECTED) at ui/vnc.c:284
#13 0x0000559193c24275 in vnc_connect (vd=vd@entry=0x7f1951498010, sioc=sioc@entry=0x559196bf9c00, skipauth=skipauth@entry=tru e, websocket=websocket@entry=false) at ui/vnc.c:3039
#14 0x0000559193c25806 in vnc_display_add_client (id=<optimized out>, csock=<optimized out>, skipauth=<optimized out>)
at ui/vnc.c:3877
#15 0x0000559193a90c28 in qmp_marshal_add_client (args=<optimized out>, ret=<optimized out>, errp=0x7fffd7899f90)
at qmp-marshal.c:105
#16 0x000055919399c2b7 in handle_qmp_command (parser=<optimized out>, tokens=<optimized out>)
at /home/berrange/src/virt/qemu/monitor.c:3971
#17 0x0000559193ce3307 in json_message_process_token (lexer=0x559194ab0838, input=0x559194a6d940, type=JSON_RCURLY, x=111, y=1 2) at qobject/json-streamer.c:105
#18 0x0000559193cfa90d in json_lexer_feed_char (lexer=lexer@entry=0x559194ab0838, ch=125 '}', flush=flush@entry=false)
at qobject/json-lexer.c:319
#19 0x0000559193cfaa1e in json_lexer_feed (lexer=0x559194ab0838, buffer=<optimized out>, size=<optimized out>)
at qobject/json-lexer.c:369
#20 0x0000559193ce33c9 in json_message_parser_feed (parser=<optimized out>, buffer=<optimized out>, size=<optimized out>)
at qobject/json-streamer.c:124
#21 0x000055919399a85b in monitor_qmp_read (opaque=<optimized out>, buf=<optimized out>, size=<optimized out>)
at /home/berrange/src/virt/qemu/monitor.c:3987
#22 0x0000559193a87d00 in tcp_chr_read (chan=<optimized out>, cond=<optimized out>, opaque=0x559194a7d900)
at qemu-char.c:2895
#23 0x00007f198b64f703 in g_main_context_dispatch () at /lib64/libglib-2.0.so.0
#24 0x0000559193c484b3 in main_loop_wait () at main-loop.c:213
#25 0x0000559193c484b3 in main_loop_wait (timeout=<optimized out>) at main-loop.c:258
#26 0x0000559193c484b3 in main_loop_wait (nonblocking=<optimized out>) at main-loop.c:506
#27 0x0000559193964c55 in main () at vl.c:1908
#28 0x0000559193964c55 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4603
This was introduced in
commit 98481bfcd6
Author: Eric Blake <eblake@redhat.com>
Date: Mon Oct 26 16:34:45 2015 -0600
vnc: Hoist allocation of VncBasicInfo to callers
which added error reporting for vnc_init_basic_info_from_server_addr
but didn't change the g_malloc calls to g_malloc0.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1470134726-15697-3-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When VNC is started with '-vnc none' there will be no
listener socket present. When we try to populate the
VncServerInfo we'll crash accessing a NULL 'lsock'
field.
#0 qio_channel_socket_get_local_address (ioc=0x0, errp=errp@entry=0x7ffd5b8aa0f0) at io/channel-socket.c:33
#1 0x00007f4b9a297d6f in vnc_init_basic_info_from_server_addr (errp=0x7ffd5b8aa0f0, info=0x7f4b9d425460, ioc=<optimized out>) at ui/vnc.c:146
#2 vnc_server_info_get (vd=0x7f4b9e858000) at ui/vnc.c:223
#3 0x00007f4b9a29d318 in vnc_qmp_event (vs=0x7f4b9ef82000, vs=0x7f4b9ef82000, event=QAPI_EVENT_VNC_CONNECTED) at ui/vnc.c:279
#4 vnc_connect (vd=vd@entry=0x7f4b9e858000, sioc=sioc@entry=0x7f4b9e8b3a20, skipauth=skipauth@entry=true, websocket=websocket @entry=false) at ui/vnc.c:2994
#5 0x00007f4b9a29e8c8 in vnc_display_add_client (id=<optimized out>, csock=<optimized out>, skipauth=<optimized out>) at ui/v nc.c:3825
#6 0x00007f4b9a18d8a1 in qmp_marshal_add_client (args=<optimized out>, ret=<optimized out>, errp=0x7ffd5b8aa230) at qmp-marsh al.c:123
#7 0x00007f4b9a0b53f5 in handle_qmp_command (parser=<optimized out>, tokens=<optimized out>) at /usr/src/debug/qemu-2.6.0/mon itor.c:3922
#8 0x00007f4b9a348580 in json_message_process_token (lexer=0x7f4b9c78dfe8, input=0x7f4b9c7350e0, type=JSON_RCURLY, x=111, y=5 9) at qobject/json-streamer.c:94
#9 0x00007f4b9a35cfeb in json_lexer_feed_char (lexer=lexer@entry=0x7f4b9c78dfe8, ch=125 '}', flush=flush@entry=false) at qobj ect/json-lexer.c:310
#10 0x00007f4b9a35d0ae in json_lexer_feed (lexer=0x7f4b9c78dfe8, buffer=<optimized out>, size=<optimized out>) at qobject/json -lexer.c:360
#11 0x00007f4b9a348679 in json_message_parser_feed (parser=<optimized out>, buffer=<optimized out>, size=<optimized out>) at q object/json-streamer.c:114
#12 0x00007f4b9a0b3a1b in monitor_qmp_read (opaque=<optimized out>, buf=<optimized out>, size=<optimized out>) at /usr/src/deb ug/qemu-2.6.0/monitor.c:3938
#13 0x00007f4b9a186751 in tcp_chr_read (chan=<optimized out>, cond=<optimized out>, opaque=0x7f4b9c7add40) at qemu-char.c:2895
#14 0x00007f4b92b5c79a in g_main_context_dispatch () from /lib64/libglib-2.0.so.0
#15 0x00007f4b9a2bb0c0 in glib_pollfds_poll () at main-loop.c:213
#16 os_host_main_loop_wait (timeout=<optimized out>) at main-loop.c:258
#17 main_loop_wait (nonblocking=<optimized out>) at main-loop.c:506
#18 0x00007f4b9a0835cf in main_loop () at vl.c:1934
#19 main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4667
Do an upfront check for a NULL lsock and report an error to
the caller, which matches behaviour from before
commit 04d2529da2
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri Feb 27 16:20:57 2015 +0000
ui: convert VNC server to use QIOChannelSocket
where getsockname() would be given a FD value -1 and thus report
an error to the caller.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1470134726-15697-2-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
commit 095497ff added thread local storage for the color counting
palette. Unfortunately, a VncPalette is about 7kB on a x86_64 system.
This memory is reserved from the stack of every thread and it
exhausted the stack space of a libxenstore thread.
Fix this by allocating memory only for the VNC encoding thread.
Fixes: 095497ffc6
Reported-by: Juergen Gross <jgross@suse.com>
Tested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1468575911-20656-1-git-send-email-pl@kamp.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In tight_encode_indexed_rect32, buf(or src)’s size is count. In for loop,
the logic is supposed to be that i is an index into src, i should be
incremented when incrementing src.
This is broken when src is incremented but i is not before while loop,
resulting in off-by-one bug in while loop.
Signed-off-by: He Rongguang <herongguang.he@huawei.com>
Message-id: 5784B8EB.7010008@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It may happen that vnc connections linger in disconnecting state forever
because VncState happens to be in a state where vnc_update_client()
exists early and never reaches the vnc_disconnect_finish() call at the
bottom of the function. Fix that by doing an additinal check at the
start of the function.
https://bugzilla.redhat.com/show_bug.cgi?id=1352799
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1468405280-2571-1-git-send-email-kraxel@redhat.com
Header guard symbols should match their file name to make guard
collisions less likely. Offenders found with
scripts/clean-header-guards.pl -vn.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Improve capability checks (count keys and buttons), store results.
Merge the input_linux_event_mouse and input_linux_event_keyboard
functions into one, dispatch into input_linux_handle_mouse and
input_linux_handle_keyboard depending on device capabilities.
Allow calling both handle functions, so we can handle mice which
also send key events, by routing those key events to the keyboard.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1466067800-25434-4-git-send-email-kraxel@redhat.com
The vnc_client_read() function is called from the vnc_client_io()
event handler callback when there is incoming data to process.
If it detects that the client has disconnected, then it will
trigger cleanup and free'ing of the VncState client struct at
a safe time.
Unfortunately, the vnc_client_io() event handler will also call
vnc_client_write() to handle any outgoing data writes. So if
vnc_client_io() was invoked with both G_IO_IN and G_IO_OUT
events set, and the client disconnects, we may try to write to
a client which has just been freed.
https://bugs.launchpad.net/qemu/+bug/1594861
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1467042529-3372-1-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
currently the color counting palette is allocated from heap, used and destroyed
for each single subrect. Use a static palette per thread for this purpose and
avoid the malloc and free for each update.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1467280846-9674-1-git-send-email-pl@kamp.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vs->disconnecting is set to TRUE and vs->ioc is closed, but
vs->ioc isn't set to NULL, so that the vnc_disconnect_finish()
isn't invoked when you update client in vnc_update_client()
after vnc_disconnect_start invoked. Let's using change the checking
condition to avoid resource leak.
Signed-off-by: Haibin Wang <wanghaibin.wang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1467949056-81208-1-git-send-email-arei.gonglei@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit "9d8256e virgl: pass whole GL scanout dimensions" missed the
opengl code path for gtk versions >= 3.16. Update that one too and
fix the build with recent gtk versions.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1467876563-1351-1-git-send-email-kraxel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Spice client needs the whole GL texture dimension to be able to show a
scanout with a monitor offset (different than +0+0).
Furthermore, this fixes a crash when calling surface_{width,height}()
after dpy_gfx_replace_surface(con, NULL) was called in
virgl_cmd_set_scanout()
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1465911849-30423-4-git-send-email-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Spice deprecated this callback in 0.12.6.
It's not a problem yet, but it will cause Clang to fail in a -Werror
build due to the deprecated tag.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1467240095-12507-2-git-send-email-jsnow@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJXaFInAAoJEJykq7OBq3PI6VsH/0Sfgbdo1RksYuQwb/y92sCW
EN+lxUZ+OLfgrc8PYgNZwfSM3rsfYhznL0MAXOeEe7Ahabi07w7DhGR8WvwfAOlI
G96FRuvrIPfv5u6U6fwS4CvG3TIHVLxfHKCsTpPUmH8U5CNx/x/tpjNiWN1dj6t+
sXybSjYHfZfiZy2tI9MFIFWCdxnF/pl0QAPhbRqc8Y/RQTDrPKRjLpz+nitN/u96
5TS7KlELyQuP91YMmLceYSmIkHbxW703h+iE2n4hov0uZCP8Jil+2Jsd3ziQSRlL
j6LqexQ2ViBGdDSfiZGYES2VPlsHOCwb4G+IgWBStfZg1ppaXENvcDzPrgrB+L4=
=eUnF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 20 Jun 2016 21:29:27 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request: (42 commits)
trace: split out trace events for linux-user/ directory
trace: split out trace events for qom/ directory
trace: split out trace events for target-ppc/ directory
trace: split out trace events for target-s390x/ directory
trace: split out trace events for target-sparc/ directory
trace: split out trace events for net/ directory
trace: split out trace events for audio/ directory
trace: split out trace events for ui/ directory
trace: split out trace events for hw/alpha/ directory
trace: split out trace events for hw/arm/ directory
trace: split out trace events for hw/acpi/ directory
trace: split out trace events for hw/vfio/ directory
trace: split out trace events for hw/s390x/ directory
trace: split out trace events for hw/pci/ directory
trace: split out trace events for hw/ppc/ directory
trace: split out trace events for hw/9pfs/ directory
trace: split out trace events for hw/i386/ directory
trace: split out trace events for hw/isa/ directory
trace: split out trace events for hw/sd/ directory
trace: split out trace events for hw/sparc/ directory
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move all trace-events for files in the ui/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-34-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.
Manual fixups:
* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
"remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
statements
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
If VNC is chosen as the compile time default display backend,
QEMU will print the host/port it listens on at startup.
Previously this would look like
VNC server running on '::1:5900'
but in 04d2529da2 the ':' was
accidentally replaced with a ';'. This the ':' back.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1465382576-25552-1-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d).
This patch is the result of coccinelle script
scripts/coccinelle/round.cocci
CC: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Limits the rate kbd events from the vnc server are forwarded to the
guest, so input devices which are typically low-bandwidth can keep
up even on bulky input.
v2: update documentation too.
v3: spell fixes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Yang Hongyang <hongyang.yang@easystack.cn>
Message-id: 1464762150-25817-1-git-send-email-kraxel@redhat.com
Our current VNC code does not handle color maps (aka non-true-color) at all
and aborts if a client requests them. There are 2 major issues with this:
1) A VNC viewer on an 8-bit X11 system may request color maps
2) RealVNC _always_ starts requesting color maps, then moves on to full color
In order to support these 2 use cases, let's just create a fake color map
that covers exactly our normal true color 8 bit color space. That way we don't
lose anything over a client that wants true color.
Reported-by: Sascha Wehnert <swehnert@suse.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1464099559-20789-1-git-send-email-den@openvz.org
Actually this is a very old patch originally submitted in 2013 by
Alexander. The situation is still the same with RealVNC, it does not
connect by default to QEMU VNC. The problem is that this client is
really popular. This is better to be kludged.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support of b8g8r8x8 pixel format for SDL2.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-id: 20160517072848.4540.34695.stgit@PASHA-ISP
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The user explicitly requested spice GL, so if we know it isn't
going to work we should exit
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: e3789e35b16f9e3cc6f2652f91c52d88ba6d6936.1463588606.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
