It turns out that we may not be able to enable this test even for the
upcoming v9.0. Document what we're still missing.
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240207005403.242235-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The new build-previous-qemu job relies on QEMU release tag being present,
while that may not be always true for personal git repositories since by
default tag is not pushed. The job can fail on those CI kicks, as reported
by Peter Maydell.
Fix it by fetching the tags remotely from the official repository, as
suggested by Dan.
[1] https://lore.kernel.org/r/ZcC9ScKJ7VvqektA@redhat.com
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240207005403.242235-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Recently we introduced cross-binary migration test. It's always wanted
that migration-test uses stable guest ABI for both QEMU binaries in this
case, so that both QEMU binaries will be compatible on the migration
stream with the cmdline specified.
Switch to a static gic version "3" rather than using version "max", so that
GIC should be stable now across any future QEMU binaries for migration-test.
Here the version can actually be anything as long as the ABI is stable. We
choose "3" because it's the majority of what we already use in QEMU while
still new enough: "git grep gic-version=3" shows 6 hit, while version 4 has
no direct user yet besides "max".
Note that even with this change, aarch64 won't be able to work yet with
migration cross binary test, but then the only missing piece will be the
stable CPU model.
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240207005403.242235-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
It is possible that one of the multifd channels fails to be created at
multifd_new_send_channel_async() while the rest of the channel
creation tasks are still in flight.
This could lead to multifd_save_cleanup() executing the
qemu_thread_join() loop too early and not waiting for the threads
which haven't been created yet, leading to the freeing of resources
that the newly created threads will try to access and crash.
Add a synchronization point after which there will be no attempts at
thread creation and therefore calling multifd_save_cleanup() past that
point will ensure it properly waits for the threads.
A note about performance: Prior to this patch, if a channel took too
long to be established, other channels could finish connecting first
and already start taking load. Now we're bounded by the
slowest-connecting channel.
Reported-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-7-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
During multifd channel creation (multifd_send_new_channel_async) when
TLS is enabled, the multifd_channel_connect function is called twice,
once to create the TLS handshake thread and another time after the
asynchrounous TLS handshake has finished.
This creates a slightly confusing call stack where
multifd_channel_connect() is called more times than the number of
channels. It also splits error handling between the two callers of
multifd_channel_connect() causing some code duplication. Lastly, it
gets in the way of having a single point to determine whether all
channel creation tasks have been initiated.
Refactor the code to move the reentrancy one level up at the
multifd_new_send_channel_async() level, de-duplicating the error
handling and allowing for the next patch to introduce a
synchronization point common to all the multifd channel creation,
regardless of TLS.
Note that the previous code would never fail once p->c had been set.
This patch changes this assumption, which affects refcounting, so add
comments around object_unref to explain the situation.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-6-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
We currently have an unfavorable situation around multifd channels
creation and the migration thread execution.
We create the multifd channels with qio_channel_socket_connect_async
-> qio_task_run_in_thread, but only connect them at the
multifd_new_send_channel_async callback, called from
qio_task_complete, which is registered as a glib event.
So at multifd_send_setup() we create the channels, but they will only
be actually usable after the whole multifd_send_setup() calling stack
returns back to the main loop. Which means that the migration thread
is already up and running without any possibility for the multifd
channels to be ready on time.
We currently rely on the channels-ready semaphore blocking
multifd_send_sync_main() until channels start to come up and release
it. However there have been bugs recently found when a channel's
creation fails and multifd_send_cleanup() is allowed to run while
other channels are still being created.
Let's start to organize this situation by moving the
multifd_send_setup() call into the migration thread. That way we
unblock the main-loop to dispatch the completion callbacks and
actually have a chance of getting the multifd channels ready for when
the migration thread needs them.
The next patches will deal with the synchronization aspects.
Note that this takes multifd_send_setup() out of the BQL.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-5-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Hide the error handling inside multifd_send_setup to make it cleaner
for the next patch to move the function around.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-4-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
We currently only need p->running to avoid calling qemu_thread_join()
on a non existent thread if the thread has never been created.
However, there are at least two bugs in this logic:
1) On the sending side, p->running is set too early and
qemu_thread_create() can be skipped due to an error during TLS
handshake, leaving the flag set and leading to a crash when
multifd_send_cleanup() calls qemu_thread_join().
2) During exit, the multifd thread clears the flag while holding the
channel lock. The counterpart at multifd_send_cleanup() reads the flag
outside of the lock and might free the mutex while the multifd thread
still has it locked.
Fix the first issue by setting the flag right before creating the
thread. Rename it from p->running to p->thread_created to clarify its
usage.
Fix the second issue by not clearing the flag at the multifd thread
exit. We don't have any use for that.
Note that these bugs are straight-forward logic issues and not race
conditions. There is still a gap for races to affect this code due to
multifd_send_cleanup() being allowed to run concurrently with the
thread creation loop. This issue is solved in the next patches.
Cc: qemu-stable <qemu-stable@nongnu.org>
Fixes: 2964714015 ("migration/tls: add support for multifd tls-handshake")
Reported-by: Avihai Horon <avihaih@nvidia.com>
Reported-by: chenyuhui5@huawei.com
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-3-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
We're currently leaking the resources of the TLS thread by not joining
it and also overwriting the p->thread pointer altogether.
Fixes: a1af605bd5 ("migration/multifd: fix hangup with TLS-Multifd due to blocking handshake")
Cc: qemu-stable <qemu-stable@nongnu.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-2-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
The commit in the fixes line mistakenly modified the channels and
transport compatibility check logic so it now checks multi-channel
support only for socket transport type.
Thus, running multifd migration using a transport other than socket that
is incompatible with multi-channels (such as "exec") would lead to a
segmentation fault instead of an error message.
For example:
(qemu) migrate_set_capability multifd on
(qemu) migrate -d "exec:cat > /tmp/vm_state"
Segmentation fault (core dumped)
Fix it by checking multi-channel compatibility for all transport types.
Cc: qemu-stable <qemu-stable@nongnu.org>
Fixes: d95533e1cd ("migration: modify migration_channels_and_uri_compatible() for new QAPI syntax")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240125162528.7552-2-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
make vm-build-freebsd fails with:
ld: error: undefined symbol: inotify_init1
>>> referenced by filemonitor-inotify.c:183 (../src/util/filemonitor-inotify.c:183)
>>> util_filemonitor-inotify.c.o:(qemu_file_monitor_new) in archive libqemuutil.a
On FreeBSD the inotify functions are defined in libinotify.so. Add it
to the dependencies.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240206002344.12372-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Unlike on Linux, on FreeBSD renaming a file when the destination
already exists results in an IN_DELETE event for that existing file:
$ FILEMONITOR_DEBUG=1 build/tests/unit/test-util-filemonitor
Rename /tmp/test-util-filemonitor-K13LI2/fish/one.txt -> /tmp/test-util-filemonitor-K13LI2/two.txt
Event id=200000000 event=2 file=one.txt
Queue event id 200000000 event 2 file one.txt
Queue event id 100000000 event 2 file two.txt
Queue event id 100000002 event 2 file two.txt
Queue event id 100000000 event 0 file two.txt
Queue event id 100000002 event 0 file two.txt
Event id=100000000 event=0 file=two.txt
Expected event 0 but got 2
This difference in behavior is not expected to break the real users, so
teach the test to accept it.
Suggested-by: "Daniel P. Berrange" <berrange@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240206002344.12372-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
After console_sshd_config(), the SSH server needs to be nudged to pick
up the new configs. The scripts for the other BSD flavors already do
this with a reboot, but a simple reload is sufficient.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240206002344.12372-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
make vm-build-freebsd sometimes fails with "Connection timed out during
banner exchange". The client strace shows:
13:59:30 write(3, "SSH-2.0-OpenSSH_9.3\r\n", 21) = 21
13:59:30 getpid() = 252655
13:59:30 poll([{fd=3, events=POLLIN}], 1, 5000) = 1 ([{fd=3, revents=POLLIN}])
13:59:32 read(3, "S", 1) = 1
13:59:32 poll([{fd=3, events=POLLIN}], 1, 3625) = 1 ([{fd=3, revents=POLLIN}])
13:59:32 read(3, "S", 1) = 1
13:59:32 poll([{fd=3, events=POLLIN}], 1, 3625) = 1 ([{fd=3, revents=POLLIN}])
13:59:32 read(3, "H", 1) = 1
There is a 2s delay during connection, and ConnectTimeout is set to 1.
Raising it makes the issue go away, but we can do better. The server
truss shows:
888: 27.811414714 socket(PF_INET,SOCK_DGRAM|SOCK_CLOEXEC,0) = 5 (0x5)
888: 27.811765030 connect(5,{ AF_INET 10.0.2.3:53 },16) = 0 (0x0)
888: 27.812166941 sendto(5,"\^Z/\^A\0\0\^A\0\0\0\0\0\0\^A2"...,39,0,NULL,0) = 39 (0x27)
888: 29.363970743 poll({ 5/POLLRDNORM },1,5000) = 1 (0x1)
So the delay is due to a DNS query. Disable DNS queries in the server
config.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240206002344.12372-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240129164514.73104-25-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Check the CVB's, CVBY's, and CVBG's corner cases.
Co-developed-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240205205830.6425-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Convert to Binary - counterparts of the already implemented Convert
to Decimal (CVD*) instructions.
Example from the Principles of Operation: 25594C becomes 63FA.
Co-developed-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240205205830.6425-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
CVDG is the same as CVD, except that it converts 64 bits into 128,
rather than 32 into 64. Create a new helper, which uses Int128
wrappers.
Reported-by: Ido Plat <Ido.Plat@ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240205205830.6425-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QEMU initializes preallocated backend memory as the objects are parsed from
the command line. This is not optimal in some cases (e.g. memory spanning
multiple NUMA nodes) because the memory objects are initialized in series.
Allow the initialization to occur in parallel (asynchronously). In order to
ensure optimal thread placement, asynchronous initialization requires prealloc
context threads to be in use.
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Message-ID: <20240131165327.3154970-2-mark.kanda@oracle.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
We used to check that the memory region size is multiples of the overall
requested address alignment for the device memory address.
We removed that check, because there are cases (i.e., hv-balloon) where
devices unconditionally request an address alignment that has a very large
alignment (i.e., 32 GiB), but the actual memory device size might not be
multiples of that alignment.
However, this change:
(a) allows for some practically impossible DIMM sizes, like "1GB+1 byte".
(b) allows for DIMMs that partially cover hugetlb pages, previously
reported in [1].
Both scenarios don't make any sense: we might even waste memory.
So let's reintroduce that check, but only check that the
memory region size is multiples of the memory region alignment (i.e.,
page size, huge page size), but not any additional memory device
requirements communicated using md->get_min_alignment().
The following examples now fail again as expected:
(a) 1M with 2M THP
qemu-system-x86_64 -m 4g,maxmem=16g,slots=1 -S -nodefaults -nographic \
-object memory-backend-ram,id=mem1,size=1M \
-device pc-dimm,id=dimm1,memdev=mem1
-> backend memory size must be multiple of 0x200000
(b) 1G+1byte
qemu-system-x86_64 -m 4g,maxmem=16g,slots=1 -S -nodefaults -nographic \
-object memory-backend-ram,id=mem1,size=1073741825B \
-device pc-dimm,id=dimm1,memdev=mem1
-> backend memory size must be multiple of 0x200000
(c) Unliagned hugetlb size (2M)
qemu-system-x86_64 -m 4g,maxmem=16g,slots=1 -S -nodefaults -nographic \
-object memory-backend-file,id=mem1,mem-path=/dev/hugepages/tmp,size=511M \
-device pc-dimm,id=dimm1,memdev=mem1
backend memory size must be multiple of 0x200000
(d) Unliagned hugetlb size (1G)
qemu-system-x86_64 -m 4g,maxmem=16g,slots=1 -S -nodefaults -nographic \
-object memory-backend-file,id=mem1,mem-path=/dev/hugepages1G/tmp,size=2047M \
-device pc-dimm,id=dimm1,memdev=mem1
-> backend memory size must be multiple of 0x40000000
Note that this fix depends on a hv-balloon change to communicate its
additional alignment requirements using get_min_alignment() instead of
through the memory region.
[1] https://lkml.kernel.org/r/f77d641d500324525ac036fe1827b3070de75fc1.1701088320.git.mprivozn@redhat.com
Message-ID: <20240117135554.787344-3-david@redhat.com>
Reported-by: Zhenyu Zhang <zhenyzha@redhat.com>
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Fixes: eb1b7c4bd4 ("memory-device: Drop size alignment check")
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
When reviewing my attempt to refactor send_prepare(), Fabiano suggested we
try out with dropping the mutex in multifd code [1].
I thought about that before but I never tried to change the code. Now
maybe it's time to give it a stab. This only optimizes the sender side.
The trick here is multifd has a clear provider/consumer model, that the
migration main thread publishes requests (either pending_job/pending_sync),
while the multifd sender threads are consumers. Here we don't have a lot
of complicated data sharing, and the jobs can logically be submitted
lockless.
Arm the code with atomic weapons. Two things worth mentioning:
- For multifd_send_pages(): we can use qatomic_load_acquire() when trying
to find a free channel, but that's expensive if we attach one ACQUIRE per
channel. Instead, keep the qatomic_read() on reading the pending_job
flag as we do already, meanwhile use one smp_mb_acquire() after the loop
to guarantee the memory ordering.
- For pending_sync: it doesn't have any extra data required since now
p->flags are never touched, it should be safe to not use memory barrier.
That's different from pending_job.
Provide rich comments for all the lockless operations to state how they are
paired. With that, we can remove the mutex.
[1] https://lore.kernel.org/r/87o7d1jlu5.fsf@suse.de
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-24-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
For consistency we should drop the names with a "+" in it in the
long run.
Message-ID: <20240117141054.73841-3-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The character "+" is now forbidden in QOM device names (see commit
b447378e12 - "Limit type names to alphanumerical and some few special
characters"). For the "power5+" and "power7+" CPU names, there is
currently a hack in type_name_is_valid() to still allow them for
compatibility reasons. However, there is a much nicer solution for this:
Simply use aliases! This way we can still support the old names without
the need for the ugly hack in type_name_is_valid().
Message-ID: <20240117141054.73841-2-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the maximum count of SCRIPTS instructions is reached, the code
stops execution and returns, but fails to decrement the reentrancy
counter. This effectively renders the SCSI controller unusable
because on next entry the reentrancy counter is still above the limit.
This bug was seen on HP-UX 10.20 which seems to trigger SCRIPTS
loops.
Fixes: b987718bbb ("hw/scsi/lsi53c895a: Fix reentrancy issues in the LSI controller (CVE-2023-0330)")
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-ID: <20240128202214.2644768-1-svens@stackframe.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As reported correctly by Fabiano [1] (while per Fabiano, it sourced back to
Elena's initial report in Oct 2023), MultiFDSendParams.packet_num is buggy
to be assigned and stored. Consider two consequent operations of: (1)
queue a job into multifd send thread X, then (2) queue another sync request
to the same send thread X. Then the MultiFDSendParams.packet_num will be
assigned twice, and the first assignment can get lost already.
To avoid that, we move the packet_num assignment from p->packet_num into
where the thread will fill in the packet. Use atomic operations to protect
the field, making sure there's no race.
Note that atomic fetch_add() may not be good for scaling purposes, however
multifd should be fine as number of threads should normally not go beyond
16 threads. Let's leave that concern for later but fix the issue first.
There's also a trick on how to make it always work even on 32 bit hosts for
uint64_t packet number. Switching to uintptr_t as of now to simply the
case. It will cause packet number to overflow easier on 32 bit, but that
shouldn't be a major concern for now as 32 bit systems is not the major
audience for any performance concerns like what multifd wants to address.
We also need to move multifd_send_state definition upper, so that
multifd_send_fill_packet() can reference it.
[1] https://lore.kernel.org/r/87o7d1jlu5.fsf@suse.de
Reported-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-23-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Most of the multifd code uses send/recv to represent the two sides, but
some rare cases use save/load.
Since send/recv is the majority, replacing the save/load use cases to use
send/recv globally. Now we reach a consensus on the naming.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-22-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Use similar logic to cleanup the recv side.
Note that multifd_recv_terminate_threads() may need some similar rework
like the sender side, but let's leave that for later.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-21-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Shrink the function by moving relevant works into helpers: move the thread
join()s into multifd_send_terminate_threads(), then create two more helpers
to cover channel/state cleanups.
Add a TODO entry for the thread terminate process because p->running is
still buggy. We need to fix it at some point but not yet covered.
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-20-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The current multifd_queue_page() is not easy to read and follow. It is not
good with a few reasons:
- No helper at all to show what exactly does a condition mean; in short,
readability is low.
- Rely on pages->ramblock being cleared to detect an empty queue. It's
slightly an overload of the ramblock pointer, per Fabiano [1], which I
also agree.
- Contains a self recursion, even if not necessary..
Rewrite this function. We add some comments to make it even clearer on
what it does.
[1] https://lore.kernel.org/r/87wmrpjzew.fsf@suse.de
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-19-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Split multifd_send_terminate_threads() into two functions:
- multifd_send_set_error(): used when an error happened on the sender
side, set error and quit state only
- multifd_send_terminate_threads(): used only by the main thread to kick
all multifd send threads out of sleep, for the last recycling.
Use multifd_send_set_error() in the three old call sites where only the
error will be set.
Use multifd_send_terminate_threads() in the last one where the main thread
will kick the multifd threads at last in multifd_save_cleanup().
Both helpers will need to set quitting=1.
Suggested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-16-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Now multifd's logic is designed to have no spurious wakeup. I still
remember a talk to Juan and he seems to agree we should drop it now, and if
my memory was right it was there because multifd used to hit that when
still debugging.
Let's drop it and see what can explode; as long as it's not reaching
soft-freeze.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-15-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This patch redefines the interfacing of ->send_prepare(). It further
simplifies multifd_send_thread() especially on zero copy.
Now with the new interface, we require the hook to do all the work for
preparing the IOVs to send. After it's completed, the IOVs should be ready
to be dumped into the specific multifd QIOChannel later.
So now the API looks like:
p->pages -----------> send_prepare() -------------> IOVs
This also prepares for the case where the input can be extended to even not
any p->pages. But that's for later.
This patch will achieve similar goal of what Fabiano used to propose here:
https://lore.kernel.org/r/20240126221943.26628-1-farosas@suse.de
However the send() interface may not be necessary. I'm boldly attaching a
"Co-developed-by" for Fabiano.
Co-developed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-14-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Introduce a helper multifd_send_prepare_header() to setup the header packet
for multifd sender.
It's fine to setup the IOV[0] _before_ send_prepare() because the packet
buffer is already ready, even if the content is to be filled in.
With this helper, we can already slightly clean up the zero copy path.
Note that I explicitly put it into multifd.h, because I want it inlined
directly into multifd*.c where necessary later.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-13-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Move them into fill/unfill of packets. With that, we can further cleanup
the send/recv thread procedure, and remove one more temp var.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-12-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Just like the previous patch, move the accounting for total_normal_pages on
both src/dst sides into the packet fill/unfill procedures.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-11-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This field, no matter whether on src or dest, is only used for debugging
purpose.
They can even be removed already, unless it still more or less provide some
accounting on "how many packets are sent/recved for this thread". The
other more important one is called packet_num, which is embeded in the
multifd packet headers (MultiFDPacket_t).
So let's keep them for now, but make them much easier to understand, by
doing below:
- Rename both of them to packets_sent / packets_recved, the old
name (num_packets) are waaay too confusing when we already have
MultiFDPacket_t.packets_num.
- Avoid worrying on the "initial packet": we know we will send it, that's
good enough. The accounting won't matter a great deal to start with 0 or
with 1.
- Move them to where we send/recv the packets. They're:
- multifd_send_fill_packet() for senders.
- multifd_recv_unfill_packet() for receivers.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-10-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The sender thread will yield the p->mutex before IO starts, trying to not
block the requester thread. This may be unnecessary lock optimizations,
because the requester can already read pending_job safely even without the
lock, because the requester is currently the only one who can assign a
task.
Drop that lock complication on both sides:
(1) in the sender thread, always take the mutex until job done
(2) in the requester thread, check pending_job clear lockless
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-8-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Multifd provide a threaded model for processing jobs. On sender side,
there can be two kinds of job: (1) a list of pages to send, or (2) a sync
request.
The sync request is a very special kind of job. It never contains a page
array, but only a multifd packet telling the dest side to synchronize with
sent pages.
Before this patch, both requests use the pending_job field, no matter what
the request is, it will boost pending_job, while multifd sender thread will
decrement it after it finishes one job.
However this should be racy, because SYNC is special in that it needs to
set p->flags with MULTIFD_FLAG_SYNC, showing that this is a sync request.
Consider a sequence of operations where:
- migration thread enqueue a job to send some pages, pending_job++ (0->1)
- [...before the selected multifd sender thread wakes up...]
- migration thread enqueue another job to sync, pending_job++ (1->2),
setup p->flags=MULTIFD_FLAG_SYNC
- multifd sender thread wakes up, found pending_job==2
- send the 1st packet with MULTIFD_FLAG_SYNC and list of pages
- send the 2nd packet with flags==0 and no pages
This is not expected, because MULTIFD_FLAG_SYNC should hopefully be done
after all the pages are received. Meanwhile, the 2nd packet will be
completely useless, which contains zero information.
I didn't verify above, but I think this issue is still benign in that at
least on the recv side we always receive pages before handling
MULTIFD_FLAG_SYNC. However that's not always guaranteed and just tricky.
One other reason I want to separate it is using p->flags to communicate
between the two threads is also not clearly defined, it's very hard to read
and understand why accessing p->flags is always safe; see the current impl
of multifd_send_thread() where we tried to cache only p->flags. It doesn't
need to be that complicated.
This patch introduces pending_sync, a separate flag just to show that the
requester needs a sync. Alongside, we remove the tricky caching of
p->flags now because after this patch p->flags should only be used by
multifd sender thread now, which will be crystal clear. So it is always
thread safe to access p->flags.
With that, we can also safely convert the pending_job into a boolean,
because we don't support >1 pending jobs anyway.
Always use atomic ops to access both flags to make sure no cache effect.
When at it, drop the initial setting of "pending_job = 0" because it's
always allocated using g_new0().
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-7-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This array is redundant when p->pages exists. Now we extended the life of
p->pages to the whole period where pending_job is set, it should be safe to
always use p->pages->offset[] rather than p->normal[]. Drop the array.
Alongside, the normal_num is also redundant, which is the same to
p->pages->num.
This doesn't apply to recv side, because there's no extra buffering on recv
side, so p->normal[] array is still needed.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-6-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Now we reset MultiFDPages_t object in the multifd sender thread in the
middle of the sending job. That's not necessary, because the "*pages"
struct will not be reused anyway until pending_job is cleared.
Move that to the end after the job is completed, provide a helper to reset
a "*pages" object. Use that same helper when free the object too.
This prepares us to keep using p->pages in the follow up patches, where we
may drop p->normal[].
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-5-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Multifd send side has two fields to indicate error quits:
- MultiFDSendParams.quit
- &multifd_send_state->exiting
Merge them into the global one. The replacement is done by changing all
p->quit checks into the global var check. The global check doesn't need
any lock.
A few more things done on top of this altogether:
- multifd_send_terminate_threads()
Moving the xchg() of &multifd_send_state->exiting upper, so as to cover
the tracepoint, migrate_set_error() and migrate_set_state().
- multifd_send_sync_main()
In the 2nd loop, add one more check over the global var to make sure we
don't keep the looping if QEMU already decided to quit.
- multifd_tls_outgoing_handshake()
Use multifd_send_terminate_threads() to set the error state. That has
a benefit of updating MigrationState.error to that error too, so we can
persist that 1st error we hit in that specific channel.
- multifd_new_send_channel_async()
Take similar approach like above, drop the migrate_set_error() because
multifd_send_terminate_threads() already covers that. Unwrap the helper
multifd_new_send_channel_cleanup() along the way; not really needed.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
When a multifd sender thread hit errors, it always needs to kick the main
thread by kicking all the semaphores that it can be waiting upon.
Provide a helper for it and deduplicate the code.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
We've already done that with multifd_flush_after_each_section, for multifd
in general. Drop the stale "TODO-like" comment.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240202102857.110210-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
A memory page poisoned from the hypervisor level is no longer readable.
The migration of a VM will crash Qemu when it tries to read the
memory address space and stumbles on the poisoned page with a similar
stack trace:
Program terminated with signal SIGBUS, Bus error.
#0 _mm256_loadu_si256
#1 buffer_zero_avx2
#2 select_accel_fn
#3 buffer_is_zero
#4 save_zero_page
#5 ram_save_target_page_legacy
#6 ram_save_host_page
#7 ram_find_and_save_block
#8 ram_save_iterate
#9 qemu_savevm_state_iterate
#10 migration_iteration_run
#11 migration_thread
#12 qemu_thread_start
To avoid this VM crash during the migration, prevent the migration
when a known hardware poison exists on the VM.
Signed-off-by: William Roche <william.roche@oracle.com>
Link: https://lore.kernel.org/r/20240130190640.139364-2-william.roche@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
