This test will simply check that modules can be loaded, and no symbols
are missing.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
People often forget to run the iotests before submitting patches or pull
requests - this is likely due to the fact that we do not run the tests
during our mandatory "make check" tests yet. Now that we've got a proper
"auto" group of iotests that should be fine to run in every environment,
we can enable the iotests during "make check" again by running the "auto"
tests by default from the check-block.sh script.
Some cases still need to be checked first, though: iotests need bash and
GNU sed (otherwise they fail), and if gprof is enabled, it spoils the
output of some test cases causing them to fail. So if we detect that one
of the required programs is missing or that gprof is enabled, we still
have to skip the iotests to avoid failures.
And finally, since we are using check-block.sh now again, this patch also
removes the qemu-iotests-quick.sh script since we do not need that anymore
(and having two shell wrapper scripts around the block tests seems rather
confusing than helpful).
Message-Id: <20190717111947.30356-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
[AJB: -makecheck to check-block.sh, move check-block to start and gate it]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
These helpers copy the source bitmap to destination bitmap with a
shift either on the src or dst bitmap.
Meanwhile, we never have bitmap tests but we should.
This patch also introduces the initial test cases for utils/bitmap.c
but it only tests the newly introduced functions.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190603065056.25211-5-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
Bitmap test used sizeof(unsigned long) instead of BITS_PER_LONG.
We make a few sub-directories recursively, in particular
$(TARGET_DIRS).
For goal "all", we do it the nice way: "all" has a prerequisite
subdir-T for each T in $(TARGET_DIRS), and T's recipe runs make
recursively. Behaves nicely with -j and -k.
For other goals such as "clean" and "install", the recipe runs make
recursively in a for loop. Ignores -j and -k.
The next commit will fix that for "clean" and "install". This commit
prepares the ground by renaming the targets we use for "all" to
include the goal for the sub-make. This will permit reusing them for
goals other than "all".
Targets subdir-T for T in $(TARGET_DIRS) run "make all" in T. Rename
to T/all, and declare phony.
Targets romsubdir-R for R in $(ROMS) run "make" in pc-bios/R. Default
goal is "all" for all R. Rename to pc-bios/R/all, and declare phony.
The remainder are renamed just for consistency.
Target subdir-dtc runs "make libbft/libfdt.a" in dtc. Rename to
dtc/all, and declare phony.
Target subdir-capstone runs make $(BUILD_DIR)/capstone/$(LIBCAPSTONE)
in $(SRC_PATH)/capstone. Rename to capstone/all, and declare phony.
Target subdir-slirp runs "make" in $(SRC_PATH)/slirp. Default goal is
all, which builds $(BUILD_DIR)/libslirp.a. Rename to slirp/all, and
declare phony.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190528082308.22032-4-armbru@redhat.com>
[Add compatibility gunk to keep make working across the rename]
Test the AMD command set for parallel flash chips. This test uses an
ARM musicpal board with a pflash drive to test the following list of
currently-supported commands.
- Autoselect
- CFI
- Sector erase
- Chip erase
- Program
- Unlock bypass
- Reset
Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-2-stephen.checkoway@oberlin.edu>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: reworded the patch subject, g_assert_cmpint -> cmphex]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190606153803.5278-4-armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
stricter rules for acpi tables: we now fail
on any difference that isn't whitelisted.
vhost-scsi migration.
some cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJc+B4YAAoJECgfDbjSjVRpq1EIAJR7tCxcpu9GggVlinmUA8G4
tmSAe06IryH7+nF3RsnINuGu7ius9qC2/E2y0uJUHhTqiU/RWOfWZ7PPM0EcYZaA
TLPaCe2NUF6/8afeqmvE9Usk7VspI5TDZRms+bonmZz2xP1lHIMN0qW4s7HHLWr8
sZKDtCJ+9cYII93VQwtlR0qiHgv5f0kzcuZeJaZHsAHH6XZGqRuQjI6txcFa4o53
lkdLCEwTnRuwu2wyL84eL5p+E8SzOgR/x1QI+nffrJfsvnmiT7lnOrkjnQlWAp5G
xqwqsUrUxUCuQ+zitwJqmv+H6nx79MwAM7fTHAETCWX703N5o9tZxAnHHqLoa8I=
=cQNg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci, pc: cleanups, features
stricter rules for acpi tables: we now fail
on any difference that isn't whitelisted.
vhost-scsi migration.
some cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 05 Jun 2019 20:55:04 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
bios-tables-test: ignore identical binaries
tests: acpi: add simple arm/virt testcase
tests: add expected ACPI tables for arm/virt board
bios-tables-test: list all tables that differ
vhost-scsi: Allow user to enable migration
vhost-scsi: Add VMState descriptor
vhost-scsi: The vhost backend should be stopped when the VM is not running
bios-tables-test: add diff allowed list
vhost: fix memory leak in vhost_user_scsi_realize
vhost: fix incorrect print type
vhost: remove the dead code
docs: smbios: remove family=x from type2 entry description
pci: Fold pci_get_bus_devfn() into its sole caller
pci: Make is_bridge a bool
pcie: Simplify pci_adjust_config_limit()
acpi: pci: use build_append_foo() API to construct MCFG
hw/acpi: Consolidate build_mcfg to pci.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a fat-fingered invocation of tap-merge.pl in the recipe of target
check-report.tap.
Fixes: 9df43317b8 "test: replace gtester with a TAP driver"
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190604080010.23186-1-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
adds simple arm/virt test case that starts guest with
bios-tables-test.aarch64.iso.qcow2 boot image which
initializes UefiTestSupport* structure in RAM once
guest is booted.
* see commit: tests: acpi: add acpi_find_rsdp_address_uefi() helper
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1559560929-260254-3-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Create an i2c-bus interface, corresponding to the I2CAdapter struct.
Wrap IMXI2C and OMAPI2C with a QOSGraphObject, and add the get_driver
function to retrieve the I2CAdapter.
The conversion is still not complete; for simplicity, i2c_recv and
i2c_send (along with their wrappers) still take an adapter/address
pair. Fixing that would be complicated until the tests are converted
to qgraph, so it is left for after the conversion.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some objects are only needed for system emulation and tools.
We can ignore them for the user mode case
Update tests to run accordingly: conditionally build some tests
on CONFIG_BLOCK.
Some tests use components that are only built when softmmu or
block tools are enabled, not for linux-user. So, if these components
are not available, disable the tests.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190401141222.30034-6-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
When possible use generated-files-$(FLAG) to disable
some targets (like KEYCODEMAP_FILES).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190401141222.30034-3-lvivier@redhat.com>
I recently noticed that test-obj-y contains a file called
tests/check-block-qtest.o which simply does not belong to any .c
file and thus wondered why this is not causing any trouble. It is
only used to add -Itests to the command line (which refers to the
build directory). However, it is not needed because "-iquote $(@D)"
already sets this up in rules.mak. Thus we can simply remove this
variable.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190508075527.32164-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
test-qapi.py doesn't force a specific encoding for stderr or
stdout, but the reference files used by check-qapi-schema are in
UTF-8. This breaks check-qapi-schema under certain circumstances
(e.g. if using the C locale and Python < 3.7).
We need to make sure test-qapi.py always generate UTF-8 output
somehow. On Python 3.7+ we can do it using
`sys.stdout.reconfigure(...)`, but we need a solution that works
with older Python versions.
Instead of trying a hack like reopening sys.stdout and
sys.stderr, we can just tell Python to use UTF-8 for I/O encoding
when running test-qapi.py. Do it by setting PYTHONIOENCODING.
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190506213817.14344-1-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, some tests contains target architecture information, in the
form of a "x86_64" tag. But that tag is not respected in the default
execution, that is, "make check-acceptance" doesn't do anything with
it.
That said, even the target architecture handling currently present in
the "avocado_qemu.Test" class is pretty limited. For instance, by
default, it chooses a target based on the host architecture.
Because the original implementation of the tags feature in Avocado did
not include any time of namespace or "key:val" mechanism, no tag has
relation to another tag. The new implementation of the tags feature
from version 67.0 onwards, allows "key:val" tags, and because of that,
a test can be classified with a tag in a given key. For instance, the
new proposed version of the "boot_linux_console.py" test, which
downloads and attempts to run a x86_64 kernel, is now tagged as:
🥑 tags=arch:x86_64
This means that it can be filtered (out) when no x86_64 target is
available. At the same time, tests that don't have a "arch:" tag,
will not be filtered out.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-6-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The current version of the "check-acceptance" target will only show
one line for execution of all tests. That's probably OK if the tests
to be run are quick enough and they're always the same.
But, there's already one test alone that takes on average ~5 seconds
to run, we intend to adapt the list of tests to match the user's build
environment (among other choices).
Because of that, let's present the default Avocado UI by default.
Users can always choose a different output by setting the AVOCADO_SHOW
variable.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-2-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In commit b94b330e23 ("tests: add missing dependency to build
QTEST_QEMU_BINARY", 2017-07-31), Phil fixed the dependency list of make
target "check-qtest-%". Namely, the recipe would set QTEST_QEMU_BINARY to
the softmmu emulator for the emulation target, but the prerequisites
didn't include the emulator.
The same issue affects the "check-report-qtest-%.tap" make target, which
is the other make target whose recipe sets QTEST_QEMU_BINARY:
> $ make -j4 check-report-qtest-aarch64.tap
> TAP check-report-qtest-aarch64.tap
> sh: /.../aarch64-softmmu/qemu-system-aarch64: No such file or directory
Apply Phil's fix to this make target too.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This removes the duplicated initialization code.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While used by TCG it is not explicitly part of TCG and the tests can
be run standalone in a minimal build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
- qcow2: Support for external data files
- qcow2: Default to 4KB for the qcow2 cache entry size
- Apply block driver whitelist for -drive format=help
- Several qemu-iotests improvements
-----BEGIN PGP SIGNATURE-----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=GCRI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Support for external data files
- qcow2: Default to 4KB for the qcow2 cache entry size
- Apply block driver whitelist for -drive format=help
- Several qemu-iotests improvements
# gpg: Signature made Fri 08 Mar 2019 12:54:27 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (33 commits)
qcow2 spec: Describe string header extensions
qemu-iotests: Add dependency to qemu-nbd tool
ahci-test: Add dependency to qemu-img tool
qemu-iotests: amend with external data file
qemu-iotests: General tests for qcow2 with external data file
qemu-iotests: Preallocation with external data file
qcow2: Implement data-file-raw create option
qcow2: Store data file name in the image
qcow2: Creating images with external data file
qcow2: Add basic data-file infrastructure
qcow2: Support external data file in qemu-img check
qcow2: Return error for snapshot operation with data file
qcow2: External file I/O
qcow2: Prepare qcow2_co_block_status() for data file
qcow2: Return 0/-errno in qcow2_alloc_compressed_cluster_offset()
qcow2: Don't assume 0 is an invalid cluster offset
qcow2: Prepare count_contiguous_clusters() for external data file
qcow2: Prepare qcow2_get_cluster_type() for external data file
qcow2: Pass bs to qcow2_get_cluster_type()
qcow2: Basic definitions for external data files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since a9660664fd, some iotests use qemu-nbd.
Add a dependency to build it before using it.
This fixes:
$ make check-block
GEN qemu-img-cmds.h
CC qemu-img.o
LINK qemu-img
CC qemu-io.o
LINK qemu-io
CC tests/qemu-iotests/socket_scm_helper.o
LINK tests/qemu-iotests/socket_scm_helper
tests/qemu-iotests-quick.sh
check: qemu-nbd not found
make: *** [tests/Makefile.include:1059: check-tests/qemu-iotests-quick.sh] Error 1
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since the ahci-test uses qemu-img, add a dependency to build it
before using it.
This fixes:
$ gmake check-qtest V=1
QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/ahci-test
Failed to execute child process "/tmp/qemu-test.19tMRF/qemu-img" (No such file or directory)
ERROR:tests/libqos/libqos.c:192:mkimg: assertion failed: (ret && !err)
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert tests/megasas-test to a driver node; the code to discover the PCI
device is replaced by generic qgraph code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/e1000-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/eepro100-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
For now, all nodes share the same constructor and destructor.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/es1370-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/vmxnet3-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/usb-hcd-ohci-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/spapr-phb-test to a qgraph test node,
spapr-phb-test. This test adds another
spapr-pci-host-bridge device in the
ppc64/pseries machine
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/pcnet-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/nvme-test to a driver node; the code to discover the PCI
device is replaced by generic qgraph code, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/ne2000-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
The actual device consumed by the test is ne2k_pci.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/ipoctal232-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
This test creates a tpci200 node that produces an interface ipack
consumed by the ipoctal232 device.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/tpci200-test to a driver node; currently it runs
the PCI nop test only, but it also produces the ipack interface.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/ac97-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only remaining test that needs libqos-virtio-obj-y is drive_del-test,
which really only needs a function. Move that function to the test
and remove libqos-virtio-obj-y.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-scsi-test in qgraph test node,
virtio-scsi-test. This test consumes a virtio-scsi interface
and checks that its function return the expected values.
Some functions are implemented only for virtio-scsi-pci, so they
don't consume virtio-scsi, but virtio-scsi-pci
Note that this test does not allocate any virtio-scsi structure,
it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-scsi-pci and virtio-scsi-device.
Both nodes produce virtio-scsi, but virtio-scsi-pci receives
a pci-bus and uses virtio-pci QOSGraphObject and its functions,
while virtio-scsi-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-net-test in qgraph test node,
virtio-net-test. This test consumes a virtio-net interface
and checks that its function return the expected values.
Note that this test does not allocate any virtio-net structure,
it's all done by the qtest walking graph mechanism. Nevertheless,
vhost-user-test is a bit more complex than the other tests, because
it requires more complicated setup of back-ends and thus almost each
test has a slightly different opts.before function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-net-test in qgraph test node,
virtio-net-test. This test consumes a virtio-net interface
and checks that its function return the expected values.
Some functions are implemented only for virtio-net-pci, so they
don't consume virtio-net, but virtio-net-pci
Note that this test does not allocate any virtio-net structure,
it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-net-pci and virtio-net-device.
Both nodes produce virtio-net, but virtio-net-pci receives
a pci-bus and overrides virtio-pci QOSGraphObject and its functions,
while virtio-net-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-blk-test in qgraph test node,
virtio-blk-test. This test consumes a virtio-blk interface
and checks that its function return the expected values.
Some functions are implemented only for virtio-blk-pci, so they
don't consume virtio-blk, but virtio-blk-pci
Note that this test does not allocate any virtio-blk structure,
it's all done by the qtest walking graph mechanism. The allocator
is also provided by qgraph; remove malloc-generic.c and malloc-generic.h
which are not used anymore.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-blk-pci and virtio-blk-device.
Both nodes produce virtio-blk, but virtio-blk-pci receives
a pci-bus and uses virtio-pci QOSGraphObject and functions,
while virtio-blk-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-rng-test in qgraph test node,
virtio-rng-test. This test consumes a virtio-rng interface
and checks that its function return the expected values.
Some functions are implemented only for virtio-rng-pci, so they
don't consume virtio-rng, but virtio-rng-pci
Note that this test does not allocate any virtio-rng structure,
it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-rng-pci and virtio-rng-device.
Both nodes produce virtio-rng, but virtio-rng-pci receives
a pci-bus and uses virtio-pci QOSGraphObject and functions,
while virtio-rng-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The tests/virtio-balloon-test is covered by generic virtio tests,
so remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Add qgraph nodes for virtio-balloon-pci and virtio-balloon-device.
Both nodes produce virtio-balloon, but virtio-balloon-pci receives
a pci-bus and uses virtio-pci QOSGraphObject and functions,
while virtio-balloon-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-9p-test into a qgraph test node.
This test consumes a virtio-9p interface and checks that its functions
return the expected values.
Note that this test does not allocate any virtio-9p structure,
it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-9p-pci and virtio-9p-device.
Both nodes produce virtio-9p, but virtio-9p-pci receives
a pci-bus and overrides virtio-pci QOSGraphObject and its functions,
while virtio-9p-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-console-test and tests/virtio-serial-test
in qgraph test node. This test consumes a virtio-serial interface
and checks that its function return the expected values.
Note that this test does not allocate any virtio-console or
virtio-serial structure, it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-serial-pci and virtio-serial-device.
Both nodes produce virtio-serial, but virtio-serial-pci receives
a pci-bus and uses virtio-pci QOSGraphObject and functions,
while virtio-serial-device receives a virtio-bus and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add arm/virt machine to the graph. This machine contains virtio-mmio, so
its constructor must take care of setting it properly when called.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add QOSGraphObject to QVirtioPCIDevice structure, with a basic
constructor. virtio-pci is not present in qgraph, since it
will be used as starting point by its subclasses (virtio-*-pci)
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/e1000e-test in qgraph test node, e1000e-test. This test
consumes an e1000e interface and checks that its function return the
expected values.
Note that this test does not allocate any e1000e structure, it's all done by the
qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-e1000e.
It consumes a pci-bus, and it's directly used by tests
(e1000e is pci based).
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add pseries machine for the ppc64 QEMU binary. This machine contains a
spapr-pci-host-bridge driver, that contains itself a pci-bus-spapr
that produces the pci-bus interface.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add pci-bus-spapr node, that produces pci-bus. Move QPCIBusSPAPR struct
declaration in its header (since it will be needed by other drivers)
and introduce a setter method for drivers that do not need to allocate
but have to initialize QPCIBusSPAPR.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/sdhci-test in first qgraph test node, sdhci-test. This test
consumes an sdhci interface and checks that its function return the
expected values.
Note that this test does not allocate any sdhci structure, it's all done by the
qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add xlnx-zcu102 machine to the graph. This machine contains generic-sdhci, so
its constructor must take care of setting it properly when called.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add xilinx-zynq-a9 machine to the graph. This machine contains generic-sdhci, so
its constructor must take care of setting it properly when called.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add arm/sabrelite machine to the graph. This machine contains generic-sdhci, so
its constructor must take care of setting it properly when called.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add arm/smdkc210 machine machine to the graph. This machine contains generic-sdhci, so
its constructor must take care of setting it properly when called.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add arm/raspi2 machine to the graph. This machine contains a generic-sdhci, so
its constructor must take care of setting it properly when called.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for sdhci-pci and generic-sdhci (memory mapped) drivers.
Both drivers implement (produce) the same interface sdhci, that provides the
readw - readq - writeq functions.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add pc machine for the x86_64 QEMU binary. This machine contains an i440FX-pcihost
driver, that contains itself a pci-bus-pc that produces the pci-bus interface.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add pci-bus-pc node, move QPCIBusPC struct declaration in its header
(since it will be needed by other drivers) and introduce a setter method
for drivers that do not need to allocate but have to initialize QPCIBusPC.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph API that allows to add/remove nodes and edges from the graph,
implementation of Depth First Search to discover the paths and basic unit
test to check correctness of the API.
Included also a main executable that takes care of starting the framework,
create the nodes, set the available drivers/machines, discover the path and
run tests.
graph.h provides the public API to manage the graph nodes/edges
graph_extra.h provides a more private API used successively by the gtest integration part
qos-test.c provides the main executable
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
[Paolo's changes compared to the Google Summer of Code submission:
* added subprocess to test options
* refactored object creation to support live migration tests
* removed driver .before callback (unused)
* removed test .after callbacks (replaced by GTest destruction queue)]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The #include directives to pull in sub-modules use file names relative
to the main module. Works only when all modules are in the same
directory, or the main module's output directory is in the compiler's
include path. Use relative file names instead.
The dummy variable we generate to avoid empty .o files has an invalid
name for sub-modules in other directories. Fix that.
Both messed up in commit 252dc3105f "qapi: Generate separate .h, .c
for each module". Escaped testing because tests/qapi-schema-test.json
doesn't cover sub-modules in other directories, only
tests/qapi-schema/include-relpath.json does, and we generate and
compile C code only for the former, not the latter. Fold the latter
into the former. This would have caught the mistakes fixed in this
commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190301154051.23317-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We now expose qemu_announce_self through QMP and HMP. Add a test
with some very basic packet validation (make sure we get a RARP).
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux hosts.
Misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJccBqMAAoJECgfDbjSjVRpvSEIAKYPRNdCBX/SSS/L/tmJS5Zt
8IyU/HW1YJ249vO+aT6z4Q3QPgqNC3KjXC3brx/WRoPZnRroen4rv2Kqnk6SayPa
a52d2ubXKWxb3swdG1CAVzFRhq/ABpgAPx0dr1JW+RXgo2lxpJ4GNYxKMosQTaPE
hRNeXl1XlcIK525kJhFH3Hlij9mTRuY6T7ydpPQd8dUq2dBRaL9RrzZRrkZxCy6l
gQPUqNzPhG0XXyOiJmwYyVX0zGzbYrMLrMQAor2SBIYmU+zv2eZGPJUYxoMTUMzt
YR0WCpvkvPITlAryaBoozAIDYVz8PxBRT1KRwpDal+2rzlm6o+veKDiF8R46gn0=
=GzUz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, cleanups, tests
Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux hosts.
Misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 22 Feb 2019 15:51:40 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (26 commits)
pci: Sanity test minimum downstream LNKSTA
hw/smbios: fix offset of type 3 sku field
pci: Move NVIDIA vendor id to the rest of ids
virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size
virtio-balloon: Use ram_block_discard_range() instead of raw madvise()
virtio-balloon: Rework ballon_page() interface
virtio-balloon: Corrections to address verification
virtio-balloon: Remove unnecessary MADV_WILLNEED on deflate
i386/kvm: ignore masked irqs when update msi routes
contrib/vhost-user-blk: fix the compilation issue
Revert "contrib/vhost-user-blk: fix the compilation issue"
pc-dimm: use same mechanism for [get|set]_addr
tests/data: introduce "uefi-boot-images" with the "bios-tables-test" ISOs
tests/uefi-test-tools: add build scripts
tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app
roms: build the EfiRom utility from the roms/edk2 submodule
roms: add the edk2 project as a git submodule
vhost-user-test: create a temporary directory per TestServer
vhost-user-test: small changes to init_hugepagefs
vhost-user-test: create a main loop per TestServer
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Re-enable the guest-agent test
- Add the possibility to load a bios image on the mcf5208evb machine
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Lzgr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2019-02-28' into staging
- Updates to MAINTAINERS file
- Re-enable the guest-agent test
- Add the possibility to load a bios image on the mcf5208evb machine
# gpg: Signature made Thu 28 Feb 2019 12:23:25 GMT
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2019-02-28:
hw/m68k/mcf5208: Support loading of bios images
tests/test-qga: Reenable guest-agent qtest
MAINTAINERS: Clean up the RISC-V TCG backend section
MAINTAINERS: Add some missing entries for the sun4m machine
MAINTAINERS: Add maintainer to the TCG/i386 subsystem
MAINTAINERS: Add maintainers to the Linux subsystem
MAINTAINERS: Orphanize the 'GDB stub' subsystem
MAINTAINERS: Add maintainer to the POSIX subsystem
MAINTAINERS: Add an entry for the Dino machine
MAINTAINERS: Add missing test entries to the Cryptography section
MAINTAINERS: Add missing entries for the QObject section
MAINTAINERS: Add missing entries for the PC machines
MAINTAINERS: Add missing entries for the sun4u machines
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Due to a misuse of rules.mak logical functions, commit f386df1744
disabled the guest-agent test.
Enable it back.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Next set of patches for ppc and spapr. There's a lot in this one:
* Support "STOP light" states on POWER9
* Add support for HVI interrupts on POWER9 (powernv machine)
* CVE-2019-8934: Don't leak host model and serial information to the guest
* Tests and cleanups for various hot unplug options
* Hash and radix MMU implementation on POWER9 for powernv machine
* PCI Host Bridge hotplug support for pseries machine
* Allow larger kernels and initrds for powernv machine
Plus a handful of miscellaneous fixes and cleanups.
The cpu hotplug tests and cleanups from David Hildenbrand aren't
solely power related. However the consensus amongst Michael Tsirkin,
David Hildenbrand, Cornelia Huck and myself was that it made most
sense to come in via my tree.
-----BEGIN PGP SIGNATURE-----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=Z4Z6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190226' into staging
ppc patch queue 2019-02-26
Next set of patches for ppc and spapr. There's a lot in this one:
* Support "STOP light" states on POWER9
* Add support for HVI interrupts on POWER9 (powernv machine)
* CVE-2019-8934: Don't leak host model and serial information to the guest
* Tests and cleanups for various hot unplug options
* Hash and radix MMU implementation on POWER9 for powernv machine
* PCI Host Bridge hotplug support for pseries machine
* Allow larger kernels and initrds for powernv machine
Plus a handful of miscellaneous fixes and cleanups.
The cpu hotplug tests and cleanups from David Hildenbrand aren't
solely power related. However the consensus amongst Michael Tsirkin,
David Hildenbrand, Cornelia Huck and myself was that it made most
sense to come in via my tree.
# gpg: Signature made Tue 26 Feb 2019 03:37:46 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.0-20190226: (50 commits)
ppc/pnv: use IEC binary prefixes to represent sizes
ppc/pnv: add INITRD_MAX_SIZE constant
ppc/pnv: increase kernel size limit to 256MiB
hw/ppc: Use object_initialize_child for correct reference counting
ppc/xive: xive does not have a POWER7 interrupt model
tests/device-plug: Add PHB unplug request test for spapr
spapr: enable PHB hotplug for default pseries machine type
spapr: add hotplug hooks for PHB hotplug
spapr_pci: add ibm, my-drc-index property for PHB hotplug
spapr_pci: provide node start offset via spapr_populate_pci_dt()
spapr_events: add support for phb hotplug events
spapr: populate PHB DRC entries for root DT node
spapr: create DR connectors for PHBs
spapr_pci: add PHB unrealize
spapr_irq: Expose the phandle of the interrupt controller
spapr: Expose the name of the interrupt controller node
xics: Write source state to KVM at claim time
spapr/drc: Drop spapr_drc_attach() fdt argument
spapr/pci: Generate FDT fragment at configure connector time
spapr: Generate FDT fragment for CPUs at configure connector time
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface
-----BEGIN PGP SIGNATURE-----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=gaah
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface
# gpg: Signature made Mon 25 Feb 2019 14:18:15 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (71 commits)
iotests: Skip 211 on insufficient memory
vmdk: false positive of compat6 with hwversion not set
iotests: add LUKS payload overhead to 178 qemu-img measure test
qcow2: include LUKS payload overhead in qemu-img measure
iotests.py: s/_/-/g on keys in qmp_log()
iotests: Let 045 be run concurrently
iotests: Filter SSH paths
iotests.py: Filter filename in any string value
iotests.py: Add is_str()
iotests: Fix 207 to use QMP filters for qmp_log
iotests: Fix 232 for LUKS
iotests: Remove superfluous rm from 232
iotests: Fix 237 for Python 2.x
iotests: Re-add filename filters
iotests: Test json:{} filenames of internal BDSs
block: BDS options may lack the "driver" option
block/null: Generate filename even with latency-ns
block/curl: Implement bdrv_refresh_filename()
block/curl: Harmonize option defaults
block/nvme: Fix bdrv_refresh_filename()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'qemu_acl' type was a previous non-QOM based attempt to provide an
authorization facility in QEMU. Because it is non-QOM based it cannot be
created via the command line and requires special monitor commands to
manipulate it.
The new QAuthZ subclasses provide a superset of the functionality in
qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor
commands are converted to use the new QAuthZSimple data type instead
in order to provide temporary backwards compatibility.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add an authorization backend that talks to PAM to check whether the user
identity is allowed. This only uses the PAM account validation facility,
which is essentially just a check to see if the provided username is permitted
access. It doesn't use the authentication or session parts of PAM, since
that's dealt with by the relevant part of QEMU (eg VNC server).
Consider starting QEMU with a VNC server and telling it to use TLS with
x509 client certificates and configuring it to use an PAM to validate
the x509 distinguished name. In this example we're telling it to use PAM
for the QAuthZ impl with a service name of "qemu-vnc"
$ qemu-system-x86_64 \
-object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\
endpoint=server,verify-peer=yes \
-object authz-pam,id=authz0,service=qemu-vnc \
-vnc :1,tls-creds=tls0,tls-authz=authz0
This requires an /etc/pam/qemu-vnc file to be created with the auth
rules. A very simple file based whitelist can be setup using
$ cat > /etc/pam/qemu-vnc <<EOF
account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow
EOF
The /etc/qemu/vnc.allow file simply contains one username per line. Any
username not in the file is denied. The usernames in this example are
the x509 distinguished name from the client's x509 cert.
$ cat > /etc/qemu/vnc.allow <<EOF
CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB
EOF
More interesting would be to configure PAM to use an LDAP backend, so
that the QEMU authorization check data can be centralized instead of
requiring each compute host to have file maintained.
The main limitation with this PAM module is that the rules apply to all
QEMU instances on the host. Setting up different rules per VM, would
require creating a separate PAM service name & config file for every
guest. An alternative approach for the future might be to not pass in
the plain username to PAM, but instead combine the VM name or UUID with
the username. This requires further consideration though.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QAuthZListFile object type that implements the QAuthZ interface. This
built-in implementation is a proxy around the QAuthZList object type,
initializing it from an external file, and optionally, automatically
reloading it whenever it changes.
To create an instance of this object via the QMP monitor, the syntax
used would be:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-list-file",
"id": "authz0",
"props": {
"filename": "/etc/qemu/vnc.acl",
"refresh": true
}
}
}
If "refresh" is "yes", inotify is used to monitor the file,
automatically reloading changes. If an error occurs during reloading,
all authorizations will fail until the file is next successfully
loaded.
The /etc/qemu/vnc.acl file would contain a JSON representation of a
QAuthZList object
{
"rules": [
{ "match": "fred", "policy": "allow", "format": "exact" },
{ "match": "bob", "policy": "allow", "format": "exact" },
{ "match": "danb", "policy": "deny", "format": "glob" },
{ "match": "dan*", "policy": "allow", "format": "exact" },
],
"policy": "deny"
}
This sets up an authorization rule that allows 'fred', 'bob' and anyone
whose name starts with 'dan', except for 'danb'. Everyone unmatched is
denied.
The object can be loaded on the comand line using
-object authz-list-file,id=authz0,filename=/etc/qemu/vnc.acl,refresh=yes
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add a QAuthZList object type that implements the QAuthZ interface. This
built-in implementation maintains a trivial access control list with a
sequence of match rules and a final default policy. This replicates the
functionality currently provided by the qemu_acl module.
To create an instance of this object via the QMP monitor, the syntax
used would be:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-list",
"id": "authz0",
"props": {
"rules": [
{ "match": "fred", "policy": "allow", "format": "exact" },
{ "match": "bob", "policy": "allow", "format": "exact" },
{ "match": "danb", "policy": "deny", "format": "glob" },
{ "match": "dan*", "policy": "allow", "format": "exact" },
],
"policy": "deny"
}
}
}
This sets up an authorization rule that allows 'fred', 'bob' and anyone
whose name starts with 'dan', except for 'danb'. Everyone unmatched is
denied.
It is not currently possible to create this via -object, since there is
no syntax supported to specify non-scalar properties for objects. This
is likely to be addressed by later support for using JSON with -object,
or an equivalent approach.
In any case the future "authz-listfile" object can be used from the
CLI and is likely a better choice, as it allows the ACL to be refreshed
automatically on change.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In many cases a single VM will just need to whitelist a single identity
as the allowed user of network services. This is especially the case for
TLS live migration (optionally with NBD storage) where we just need to
whitelist the x509 certificate distinguished name of the source QEMU
host.
Via QMP this can be configured with:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-simple",
"id": "authz0",
"props": {
"identity": "fred"
}
}
}
Or via the command line
-object authz-simple,id=authz0,identity=fred
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The inotify userspace API for reading events is quite horrible, so it is
useful to wrap it in a more friendly API to avoid duplicating code
across many users in QEMU. Wrapping it also allows introduction of a
platform portability layer, so that we can add impls for non-Linux based
equivalents in future.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We missed a bug in a recent patch as we were not testing all the
rounding modes for all operations. However enabling all rounding modes
for mulAdd does slow down the already slowest test and doesn't really
buy us much additional coverage so lets allow the default test flags
to be overridden.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We've just added f128_to_ui32 and we missed out the f128_to_ui64 tests
last time.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The issue with testing asynchronous unplug requests it that they usually
require a running guest to handle the request. However, to test if
unplug of PCI devices works, we can apply a nice little trick on some
architectures:
On system reset, x86 ACPI, s390x and spapr will perform the unplug,
resulting in the device of interest to get deleted and a DEVICE_DELETED
event getting sent.
On s390x, we still get a warning
qemu-system-s390x: -device virtio-mouse-pci,id=dev0:
warning: Plugging a PCI/zPCI device without the 'zpci' CPU feature
enabled; the guest will not be able to see/use this device
This will be fixed soon, when we enable the zpci CPU feature always
(Conny already has a patch for this queued).
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218092202.26683-4-david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add two tests of node graph modification.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some operations take a long time and enabling "-l 2 -r all" can take
more than a day which is stretching the definition of a "slow" test.
Lets default to the quick test and leave a note for those who wish to
run by hand.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This shows a preexisting bug: if a KVM target did not have virtio-net enabled,
it would fail with undefined symbols when vhost was enabled. This must now
be fixed, lest targets that have no virtio-net fail to compile.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1543851204-41186-5-git-send-email-pbonzini@redhat.com>
Message-Id: <1550165756-21617-6-git-send-email-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On Linux (and maybe some BSDs), we require libutil for the openpty()
function. However, this library is not available on some other systems, so
we currently use a fragile if-statement in the configure script to check
whether we need the library or not. Unfortunately, we also hard-coded a
"-lutil" in the tests/Makefile.include file, so this breaks the build on
Solaris, for example (see buglink below). To fix the issue, add the "-lutil"
to "libs_tools" in the configure script instead, then this gets properly
propagated to the tests, too.
And while we're at it, also replace the fragile if-statement in the confi-
gure script with a proper link-check for the availability of this function.
Buglink: https://bugs.launchpad.net/qemu/+bug/1777252
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the block layer, synchronous APIs are often implemented by creating a
coroutine that calls the asynchronous coroutine-based implementation and
then waiting for completion with BDRV_POLL_WHILE().
For this to work with iothreads (more specifically, when the synchronous
API is called in a thread that is not the home thread of the block
device, so that the coroutine will run in a different thread), we must
make sure to call aio_wait_kick() at the end of the operation. Many
places are missing this, so that BDRV_POLL_WHILE() keeps hanging even if
the condition has long become false.
Note that bdrv_dec_in_flight() involves an aio_wait_kick() call. This
corresponds to the BDRV_POLL_WHILE() in the drain functions, but it is
generally not enough for most other operations because they haven't set
the return value in the coroutine entry stub yet. To avoid race
conditions there, we need to kick after setting the return value.
The race window is small enough that the problem doesn't usually surface
in the common path. However, it does surface and causes easily
reproducible hangs if the operation can return early before even calling
bdrv_inc/dec_in_flight, which many of them do (trivial error or no-op
success paths).
The bug in bdrv_truncate(), bdrv_check() and bdrv_invalidate_cache() is
slightly different: These functions even neglected to schedule the
coroutine in the home thread of the node. This avoids the hang, but is
obviously wrong, too. Fix those to schedule the coroutine in the right
AioContext in addition to adding aio_wait_kick() calls.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
