Commit Graph

8 Commits

Author SHA1 Message Date
Emilio G. Cota
403f290c06 cputlb: read CPUTLBEntry.addr_write atomically
Updates can come from other threads, so readers that do not
take tlb_lock must use atomic_read to avoid undefined
behaviour (UB).

This completes the conversion to tlb_lock. This conversion results
on average in no performance loss, as the following experiments
(run on an Intel i7-6700K CPU @ 4.00GHz) show.

1. aarch64 bootup+shutdown test:

- Before:
 Performance counter stats for 'taskset -c 0 ../img/aarch64/die.sh' (10 runs):

       7487.087786      task-clock (msec)         #    0.998 CPUs utilized            ( +-  0.12% )
    31,574,905,303      cycles                    #    4.217 GHz                      ( +-  0.12% )
    57,097,908,812      instructions              #    1.81  insns per cycle          ( +-  0.08% )
    10,255,415,367      branches                  # 1369.747 M/sec                    ( +-  0.08% )
       173,278,962      branch-misses             #    1.69% of all branches          ( +-  0.18% )

       7.504481349 seconds time elapsed                                          ( +-  0.14% )

- After:
 Performance counter stats for 'taskset -c 0 ../img/aarch64/die.sh' (10 runs):

       7462.441328      task-clock (msec)         #    0.998 CPUs utilized            ( +-  0.07% )
    31,478,476,520      cycles                    #    4.218 GHz                      ( +-  0.07% )
    57,017,330,084      instructions              #    1.81  insns per cycle          ( +-  0.05% )
    10,251,929,667      branches                  # 1373.804 M/sec                    ( +-  0.05% )
       173,023,787      branch-misses             #    1.69% of all branches          ( +-  0.11% )

       7.474970463 seconds time elapsed                                          ( +-  0.07% )

2. SPEC06int:
                                              SPEC06int (test set)
                                           [Y axis: Speedup over master]
  1.15 +-+----+------+------+------+------+------+-------+------+------+------+------+------+------+----+-+
       |                                                                                                  |
   1.1 +-+.................................+++.............................+  tlb-lock-v2 (m+++x)       +-+
       |                                +++ |                   +++        tlb-lock-v3 (spinl|ck)         |
       |                    +++          |  |     +++    +++     |                           |            |
  1.05 +-+....+++...........####.........|####.+++.|......|.....###....+++...........+++....###.........+-+
       |      ###         ++#| #         |# |# ***### +++### +++#+#     |     +++     |     #|#    ###    |
     1 +-+++***+#++++####+++#++#++++++++++#++#+*+*++#++++#+#+****+#++++###++++###++++###++++#+#++++#+#+++-+
       |    *+* #    #++# ***  #   #### ***  # * *++# ****+# *| * # ****|#   |# #    #|#    #+#    # #    |
  0.95 +-+..*.*.#....#..#.*|*..#...#..#.*|*..#.*.*..#.*|.*.#.*++*.#.*++*+#.****.#....#+#....#.#..++#.#..+-+
       |    * * #    #  # *|*  #   #  # *|*  # * *  # *++* # *  * # *  * # * |* #  ++# #    # #  *** #    |
       |    * * #  ++#  # *+*  #   #  # *|*  # * *  # *  * # *  * # *  * # *++* # **** #  ++# #  * * #    |
   0.9 +-+..*.*.#...|#..#.*.*..#.++#..#.*|*..#.*.*..#.*..*.#.*..*.#.*..*.#.*..*.#.*.|*.#...|#.#..*.*.#..+-+
       |    * * #  ***  # * *  #  |#  # *+*  # * *  # *  * # *  * # *  * # *  * # *++* #   |# #  * * #    |
  0.85 +-+..*.*.#..*|*..#.*.*..#.***..#.*.*..#.*.*..#.*..*.#.*..*.#.*..*.#.*..*.#.*..*.#.****.#..*.*.#..+-+
       |    * * #  *+*  # * *  # *|*  # * *  # * *  # *  * # *  * # *  * # *  * # *  * # * |* #  * * #    |
       |    * * #  * *  # * *  # *+*  # * *  # * *  # *  * # *  * # *  * # *  * # *  * # * |* #  * * #    |
   0.8 +-+..*.*.#..*.*..#.*.*..#.*.*..#.*.*..#.*.*..#.*..*.#.*..*.#.*..*.#.*..*.#.*..*.#.*++*.#..*.*.#..+-+
       |    * * #  * *  # * *  # * *  # * *  # * *  # *  * # *  * # *  * # *  * # *  * # *  * #  * * #    |
  0.75 +-+--***##--***###-***###-***###-***###-***###-****##-****##-****##-****##-****##-****##--***##--+-+
 400.perlben401.bzip2403.gcc429.m445.gob456.hmme45462.libqua464.h26471.omnet473483.xalancbmkgeomean

  png: https://imgur.com/a/BHzpPTW

Notes:
- tlb-lock-v2 corresponds to an implementation with a mutex.
- tlb-lock-v3 corresponds to the current implementation, i.e.
  a spinlock and a single lock acquisition in tlb_set_page_with_attrs.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181016153840.25877-1-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18 19:46:53 -07:00
Richard Henderson
383beda9cf tcg: Add tlb_index and tlb_entry helpers
Isolate the computation of an index from an address into a
helper before we change that function.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[ cota: convert tlb_vaddr_to_host; use atomic_read on addr_write ]
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181009175129.17888-2-cota@braap.org>
2018-10-18 18:58:10 -07:00
Peter Maydell
dbea78a4d6 accel/tcg: Pass read access type through to io_readx()
The io_readx() function needs to know whether the load it is
doing is an MMU_DATA_LOAD or an MMU_INST_FETCH, so that it
can pass the right value to the cpu_transaction_failed()
function. Plumb this information through from the softmmu
code.

This is currently not often going to give the wrong answer,
because usually instruction fetches go via get_page_addr_code().
However once we switch over to handling execution from non-RAM by
creating single-insn TBs, the path for an insn fetch to generate
a bus error will be through cpu_ld*_code() and io_readx(),
so without this change we will generate a d-side fault when we
should generate an i-side fault.

We also have to pass the access type via a CPU struct global
down to unassigned_mem_read(), for the benefit of the targets
which still use the cpu_unassigned_access() hook (m68k, mips,
sparc, xtensa).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180710160013.26559-2-peter.maydell@linaro.org
2018-08-14 17:17:19 +01:00
Peter Maydell
334692bce7 tcg: Define and use new tlb_hit() and tlb_hit_page() functions
The condition to check whether an address has hit against a particular
TLB entry is not completely trivial. We do this in various places, and
in fact in one place (get_page_addr_code()) we have got the condition
wrong. Abstract it out into new tlb_hit() and tlb_hit_page() inline
functions (one for a known-page-aligned address and one for an
arbitrary address), and use them in all the places where we had the
condition correct.

This is a no-behaviour-change patch; we leave fixing the buggy
code in get_page_addr_code() to a subsequent patch.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180629162122.19376-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-02 08:02:20 -07:00
Peter Maydell
55df6fcf54 tcg: Support MMU protection regions smaller than TARGET_PAGE_SIZE
Add support for MMU protection regions that are smaller than
TARGET_PAGE_SIZE. We do this by marking the TLB entry for those
pages with a flag TLB_RECHECK. This flag causes us to always
take the slow-path for accesses. In the slow path we can then
special case them to always call tlb_fill() again, so we have
the correct information for the exact address being accessed.

This change allows us to handle reading and writing from small
regions; we cannot deal with execution from the small region.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180620130619.11362-2-peter.maydell@linaro.org
2018-06-26 17:50:41 +01:00
Laurent Vivier
98670d47cd accel/tcg: add size paremeter in tlb_fill()
The MC68040 MMU provides the size of the access that
triggers the page fault.

This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.

So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().

To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.

This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
2018-01-25 16:02:24 +01:00
David Hildenbrand
f52bfb1214 accel/tcg: allow to invalidate a write TLB entry immediately
Background: s390x implements Low-Address Protection (LAP). If LAP is
enabled, writing to effective addresses (before any translation)
0-511 and 4096-4607 triggers a protection exception.

So we have subpage protection on the first two pages of every address
space (where the lowcore - the CPU private data resides).

By immediately invalidating the write entry but allowing the caller to
continue, we force every write access onto these first two pages into
the slow path. we will get a tlb fault with the specific accessed
addresses and can then evaluate if protection applies or not.

We have to make sure to ignore the invalid bit if tlb_fill() succeeds.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171016202358.3633-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Thomas Huth
da1849c1eb accel/tcg: move softmmu_template.h to accel/tcg/
The header is only used by accel/tcg/cputlb.c so we can
move it to the accel/tcg/ folder, too.

Signed-off-by: Thomas Huth <thuth@redhat.com>
[PMD: reword commit title to match series]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170911213328.9701-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17 06:52:19 -07:00