Not implemented: CTS/NCTS, PSEL*.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is mostly for readability of the code. Let's make it clear which
callers can create an implicit monitor when the chardev is muxed.
This will also enforce a safer behaviour, as we don't really support
creating monitor anywhere/anytime at the moment. Add an assert() to
make sure the programmer explicitely wanted that behaviour.
There are documented cases, such as: -serial/-parallel/-virtioconsole
and to less extent -debugcon.
Less obvious and questionable ones are -gdb, SLIRP -guestfwd and Xen
console. Add a FIXME note for those, but keep the support for now.
Other qemu_chr_new() callers either have a fixed parameter/filename
string or do not need it, such as -qtest:
* qtest.c: qtest_init()
Afaik, only used by tests/libqtest.c, without mux. I don't think we
support it outside of qemu testing: drop support for implicit mux
monitor (qemu_chr_new() call: no implicit mux now).
* hw/
All with literal @filename argument that doesn't enable mux monitor.
* tests/
All with @filename argument that doesn't enable mux monitor.
On a related note, the list of monitor creation places:
- the chardev creators listed above: all from command line (except
perhaps Xen console?)
- -gdb & hmp gdbserver will create a "GDB monitor command" chardev
that is wired to an HMP monitor.
- -mon command line option
From this short study, I would like to think that a monitor may only
be created in the main thread today, though I remain skeptical :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
The address of a packed member is not packed, which may cause accesses
to unaligned pointers. Avoid this by reading the packed value before
passing it to another function.
Cc: Jason Wang <jasowang@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 0147883450 tries to handle
word-sized writes to DLL/DLH, but due to a typo,
this patch is causing tracebacks in all Linux kernels running the PXA
serial driver, due to an unexpected DLL register value. Here is the
surrounding code from drivers/tty/serial/pxa.c:
serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
/*
* work around Errata #75 according to Intel(R) PXA27x
* Processor Family Specification Update (Nov 2005)
*/
dll = serial_in(up, UART_DLL);
WARN_ON(dll != (quot & 0xff)); // <-- warning
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 0147883450
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As of commit 18e8cf159177100e ("serial: sh-sci: increase RX FIFO trigger
defaults for (H)SCIF") in Linux v4.11-rc1, the serial console on the
QEMU SH4 target is broken: it delays serial input until enough data has
been received.
Since aforementioned commit, the Linux SCIF driver programs the Receive
FIFO Data Count Trigger bits in the FIFO Control Register, to postpone
generating a receive interrupt until:
1. At least the receive trigger count of bytes of data are available
in the receive FIFO, OR
2. No further data has been received for at least 15 etu after the
last received data.
While QEMU implements the former, it does not implement the latter.
Hence the receive interrupt is not generated until the former condition
is met.
Fix this by adding basic timeout handling. As the QEMU SCIF emulation
ignores any serial speed programming, the timeout value used conforms to
a default speed of 9600 bps, which is fine for any interactive console.
Reported-by: Rob Landley <rob@landley.net>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Ulrich Hecht <uli@fpond.eu>
Tested-by: Rob Landley <rob@landley.net>
Tested-by: Rich Felker <dalias@libc.org>
Message-Id: <20180905131125.12635-1-geert+renesas@glider.be>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The generated qapi_event_send_FOO() take an Error ** argument. They
can't actually fail, because all they do with the argument is passing it
to functions that can't fail: the QObject output visitor, and the
@qmp_emit callback, which is either monitor_qapi_event_queue() or
event_test_emit().
Drop the argument, and pass &error_abort to the QObject output visitor
and @qmp_emit instead.
Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815133747.25032-4-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Generate an interrupt if USR2_RDR and UCR4_DREN are both set.
Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Message-id: 1534341354-11956-1-git-send-email-hans-erik.floryd@rt-labs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
RX and TX interrupt bits were reversed, resulting in an endless sequence
of serial interupts in the emulated system and the following repeated
error message when booting Linux.
serial8250: too much work for irq61
This results in a boot failure most of the time.
Qemu command line used to reproduce the problem:
qemu-system-aarch64 -M raspi3 -m 1024 \
-kernel arch/arm64/boot/Image \
--append "rdinit=/sbin/init console=ttyS1,115200"
-initrd rootfs.cpio \
-dtb arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dtb \
-nographic -monitor null -serial null -serial stdio
This is with arm64:defconfig. The root file system was generated using
buildroot.
NB that this error likely arises from an erratum in the
BCM2835 datasheet where the TX and RX bits were swapped
in the AU_MU_IER_REG description (but correct for IIR):
https://elinux.org/BCM2835_datasheet_errata#p12
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1529355846-25102-1-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added NB about datasheet]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes several problems I found in the UART serial implementation.
Now all divisor values are allowed, while before divisor values of zero
and below the base baud rate were rejected. All changes are in reference
to http://www.sci.muni.cz/docs/pc/serport.txt
Signed-off-by: Calvin Lee <cyrus296@gmail.com>
Message-Id: <20180512000545.966-2-cyrus296@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only retry on serial_xmit if qemu_chr_fe_write returns 0, as this is the
only recoverable error.
Retrying with any other scenario, in addition to being a waste of CPU
cycles, can compromise the Guest stability if by the vCPU issuing the
write and the main loop thread are, by chance or explicit pinning,
running on the same pCPU.
Previous discussion:
https://lists.nongnu.org/archive/html/qemu-devel/2018-05/msg06998.html
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <1528185295-14199-1-git-send-email-slp@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the parallel device away from using the old_mmio field
of MemoryRegionOps. This change only affects the memory-mapped
variant, which is used by the MIPS Jazz boards 'magnum' and 'pica61'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180601141223.26630-7-peter.maydell@linaro.org
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606152128.449-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is only half of the work, because the proxy devices (virtio-*-pci,
virtio-*-ccw, etc.) are still included unconditionally. It is still a
move in the right direction.
Based-on: <20180522194943.24871-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that helpers are available in xen_backend, use them throughout all
Xen PV backends.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
The character frontend needs to be notified that the uart receive buffer
is empty and ready to handle another character.
Previously, the uart only worked correctly when receiving one character
at a time.
Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
Message-id: CAEg67GkRTw=cXei3o9hvpxG_L4zSrNzR0bFyAgny+sSEUb_kPw@mail.gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ISA serial port handling in serial-isa.c imposes a limit
of 4 serial ports. This is because we only know of 4 IO port
and IRQ settings for them, and is unrelated to the generic
MAX_SERIAL_PORTS limit, though they happen to both be set at
4 currently.
Use a new MAX_ISA_SERIAL_PORTS wherever that is the correct
limit to be checking against.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-11-peter.maydell@linaro.org
The handling of NULL chardevs in exynos4210_uart_create() is now
all unnecessary: we don't need to create 'null' chardevs, and we
don't need to enforce a bounds check on serial_hd().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180420145249.32435-10-peter.maydell@linaro.org
Change all the uses of serial_hds[] to go via the new
serial_hd() function. Code change produced with:
find hw -name '*.[ch]' | xargs sed -i -e 's/serial_hds\[\([^]]*\)\]/serial_hd(\1)/g'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180420145249.32435-8-peter.maydell@linaro.org
Currently the serial.c realize code has an explicit check that it is not
connected to a disconnected backend (ie one with a NULL chardev).
This isn't what we want -- you should be able to create a serial device
even if it isn't attached to anything. Remove the check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180420145249.32435-2-peter.maydell@linaro.org
The CMSDK APB UART INTSTATUS register bits are all write-one-to-clear.
We were getting this correct for the TXO and RXO bits (which need
special casing because their state lives in the STATE register),
but had forgotten to handle the normal bits for RX and TX which
we do store in our s->intstatus field.
Perform the W1C operation on the bits in s->intstatus too.
Fixes: https://bugs.launchpad.net/qemu/+bug/1760262
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180410134203.17552-1-peter.maydell@linaro.org
Check device having the feature of VIRTIO_CONSOLE_F_EMERG_WRITE before
get config->emerg_wr. It is neccessary because sizeof(virtio_console_config)
is 8 byte if VirtIOSerial doesn't have the feature of
VIRTIO_CONSOLE_F_EMERG_WRITE(see virtio_serial_device_realize),
read/write emerg_wr will lead to heap-over-flow.
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Linux does not detect a break from this IMX serial driver as a magic
sysrq. Nor does it note a break in the port error counts.
The former is because the Linux driver uses the BRCD bit in the USR2
register to trigger the RS-232 break handler in the kernel, which is
where sysrq hooks in. The emulated UART was not setting this status
bit.
The latter is because the Linux driver expects, in addition to the BRK
bit, that the ERR bit is set when a break is read in the FIFO. A break
should also count as a frame error, so add that bit too.
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Message-id: 20180320013657.25038-1-tpiepho@impinj.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for "TX complete"/TXDC interrupt generate by real HW since
it is needed to support guests other than Linux.
Based on the patch by Bill Paul as found here:
https://bugs.launchpad.net/qemu/+bug/1753314
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: Bill Paul <wpaul@windriver.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bill Paul <wpaul@windriver.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Message-id: 20180315191141.6789-2-andrew.smirnov@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Code of imx_update() is slightly confusing since the "flags" variable
doesn't really corespond to anything in real hardware and server as a
kitchensink accumulating events normally reported via USR1 and USR2
registers.
Change the code to explicitly evaluate state of interrupts reported
via USR1 and USR2 against corresponding masking bits and use the to
detemine if IRQ line should be asserted or not.
NOTE: Check for UTS1_TXEMPTY being set has been dropped for two
reasons:
1. Emulation code implements a single character FIFO, so this flag
will always be set since characters are trasmitted as a part of
the code emulating "push" into the FIFO
2. imx_update() is really just a function doing ORing and maksing
of reported events, so checking for UTS1_TXEMPTY should happen,
if it's ever really needed should probably happen outside of
it.
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: Bill Paul <wpaul@windriver.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Message-id: 20180315191141.6789-1-andrew.smirnov@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Again... (after 07dc788054 and 9157eee1b1).
We now extract the ISA bus specific helpers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-2-f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce an sccb_mask_t to be used for SCLP event masks instead of just
unsigned int or uint32_t. This will allow later to extend the mask with
more ease.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1519407778-23095-3-git-send-email-imbrenda@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The other event handlers (quiesce and cpu) do not define these
handlers, and this one does nothing, so it can be removed.
Signed-off-by: Nia Alarie <nia.alarie@gmail.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180306100721.19419-1-nia.alarie@gmail.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
I/O currently being synchronous, there is no reason to ever clear the
SR_TXE bit. However the SR_TC bit may be cleared by software writing
to the SR register, so set it on each write.
In addition, fix the reset value of the USART status register.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
[PMM: removed XXX tag from comment, since it isn't something
we need to come back and fix in QEMU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move necessary stuff in escc.h and update type names.
Remove slavio_serial_ms_kbd_init().
Fix code style problems reported by checkpatch.pl
Update mac_newworld, mac_oldworld and sun4m to use directly the
QDEV interface.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
Replace the qcode_to_keycode table with automatically
generated tables.
Missing entries in qcode_to_keycode now fixed:
- Q_KEY_CODE_KP_COMMA -> 0x2d
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The point of writing a macro embedded in a 'do { ... } while (0)'
loop (particularly if the macro has multiple statements or would
otherwise end with an 'if' statement) is so that the macro can be
used as a drop-in statement with the caller supplying the
trailing ';'. Although our coding style frowns on brace-less 'if':
if (cond)
statement;
else
something else;
that is the classic case where failure to use do/while(0) wrapping
would cause the 'else' to pair with any embedded 'if' in the macro
rather than the intended outer 'if'. But conversely, if the macro
includes an embedded ';', then the same brace-less coding style
would now have two statements, making the 'else' a syntax error
rather than pairing with the outer 'if'. Thus, even though our
coding style with required braces is not impacted, ending a macro
with ';' makes our code harder to port to projects that use
brace-less styles.
The change should have no semantic impact. I was not able to
fully compile-test all of the changes (as some of them are
examples of the ugly bit-rotting debug print statements that are
completely elided by default, and I didn't want to recompile
with the necessary -D witnesses - cleaning those up is left as a
bite-sized task for another day); I did, however, audit that for
all files touched, all callers of the changed macros DID supply
a trailing ';' at the callsite, and did not appear to be used
as part of a brace-less conditional.
Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171201232433.25193-7-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's a replacement of g_timeout_add[_seconds]() for chardevs. Chardevs
now can have dedicated gcontext, we should always bind chardev tasks
onto those gcontext rather than the default main context. Since there
are quite a few of g_timeout_add[_seconds]() callers, a new function
qemu_chr_timeout_add_ms() is introduced.
One thing to mention is that, terminal3270 is still always running on
main gcontext. However let's convert that as well since it's still part
of chardev codes and in case one day we'll miss that when we move it out
of main gcontext too.
Also, convert all the timers from GSource tags into GSource pointers.
Gsource tag IDs and g_source_remove()s can only work with default
gcontext, while now these GSources can logically be attached to other
contexts. So let's use explicit g_source_destroy() plus another
g_source_unref() to remove a timer.
Note: when in the timer handler, we don't need the g_source_destroy()
any more since that'll be done automatically if the timer handler
returns false (and that's what all the current handlers do).
Yet another note: in pty_chr_rearm_timer() we take special care for
ms=1000. This patch merged the two cases into one.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180104141835.17987-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
exec: housekeeping (funny since 02d0e09503)
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The spapr-vty device implements the PAPR defined virtual console,
which is also implemented by IBM's proprietary PowerVM hypervisor.
PowerVM's implementation has a bug where it inserts an extra \0 after
every \r going to the guest. Because of that Linux's guest side
driver has a workaround which strips \0 characters that appear
immediately after a \r.
That means that when running under qemu, sending a binary stream from
host to guest via spapr-vty which happens to include a \r\0 sequence
will get corrupted by that workaround.
To deal with that, this patch duplicates PowerVM's bug, inserting an
extra \0 after each \r. Ugly, but the best option available.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Some drivers for the PPMC7400 PowerPC evaluation board accesses the
serial registers through the floating point unit (stfd/ldfd), which is
an 8-byte wide access. This patch enables that behavior.
Signed-off-by: Mike Nawrocki <michael.nawrocki@gtri.gatech.edu>
Message-Id: <20171106161039.32596-1-michael.nawrocki@gtri.gatech.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of
TYPE_PCI_DEVICE, except:
1) The ones that already have INTERFACE_PCIE_DEVICE set:
* base-xhci
* e1000e
* nvme
* pvscsi
* vfio-pci
* virtio-pci
* vmxnet3
2) base-pci-bridge
Not all PCI bridges are Conventional PCI devices, so
INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes
that are actually Conventional PCI:
* dec-21154-p2p-bridge
* i82801b11-bridge
* pbm-bridge
* pci-bridge
The direct subtypes of base-pci-bridge not touched by this patch
are:
* xilinx-pcie-root: Already marked as PCIe-only.
* pcie-pci-bridge: Already marked as PCIe-only.
* pcie-port: all non-abstract subtypes of pcie-port are already
marked as PCIe-only devices.
3) megasas-base
Not all megasas devices are Conventional PCI devices, so the
interface names are added to the subclasses registered by
megasas_register_types(), according to information in the
megasas_devices[] array.
"megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add
INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas".
Acked-by: Alberto Garcia <berto@igalia.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The problem is, that the current implementation places unrealistic and
arbitrary constraints on the length of writes to the device (that is the
outbound requests), by asserting ccw.count being such that that even the
worst case escaped payload will fit an more or less arbitrary sized
buffer. Actually on protocol level there is nothing to justify such
a limitation.
Another strange thing is the return value which more or less reflects
the size (written) after escaping instead of before escaping. This
is strange, because this return value is used to calculate SCSW.count.
Let us teach 3270 how to deal with arbitrary long writes.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reported-by: Jason J . Herne <jjherne@linux.vnet.ibm.com>
Tested-by: Jason J . Herne <jjherne@linux.vnet.ibm.com>
Message-Id: <20170920172314.102710-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let us convert the 3270 code so it uses the recently introduced
CcwDataStream abstraction instead of blindly assuming direct data access.
This patch does not change behavior beyond introducing IDA support: for
direct data access CCWs everything stays as-is. (If there are bugs, they
are also preserved).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170920172314.102710-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We should guarantee that RAM will not be modified while VM has a stopped
state, otherwise it can lead to negative consequences during post-copy
migration. In RUN_STATE_FINISH_MIGRATE step, it's expected that RAM on
source side will not be modified as this could lead to non-consistent vm state
on the destination side. Also RAM access during postcopy-ram migration with
enabled release-ram capability can lead to sad consequences.
Let's add enable_backend() callback to avoid undesirable virtioqueue changes
in the guest memory.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Message-Id: <20170919120733.22020-1-pbutsykin@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
