LLVM's linker, LLD, supports the keyword "INSERT AFTER", starting with
version 11.
However, when multiple sections are defined in the same "INSERT AFTER",
they are added in a reversed order, compared to BFD's LD.
This patch makes fork_fuzz.ld generic enough to work with both linkers.
Each section now has its own "INSERT AFTER" keyword, so proper ordering is
defined between the sections added.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201105221905.1350-2-dbuono@linux.vnet.ibm.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 'addr' would not be NULL after checking 'succ' is valid,
and it has been dereferenced in the previous code(args = g_strdup_printf()).
So the check on 'addr' in the tpm_test_swtpm_test() is redundant. Remove it.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-Id: <5FA41448.4040404@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-Id: <5FA28117.3020802@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
device-introspect-test uses HMP, so it should escape the device name
properly. Because of this, a few devices that had commas in their
names were escaping testing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code did not add offsets to FlatRange bases, so we did not fuzz
offsets within device MemoryRegions.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201029172901.534442-4-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should be checking that the device is trying to read from RAM, before
filling the region with data. Otherwise, we will try to populate
nonsensical addresses in RAM for callbacks on PIO/MMIO reads. We did
this originally, however the final version I sent had the line commented
out..
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201029172901.534442-3-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This code had all sorts of issues. We used a loop similar to
address_space_write_rom, but I did not remove a "break" that only made
sense in the context of the switch statement in the original code. Then,
after the loop, we did a separate qtest_memwrite over the entire DMA
access range, defeating the purpose of the loop. Additionally, we
increment the buf pointer, and then try to g_free() it. Fix these
problems.
Reported-by: OSS-Fuzz (Issue 26725)
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: OSS-Fuzz (Issue 26691)
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201029172901.534442-2-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We deprecated the support for the 'r4k' machine for the 5.0 release
(commit d32dc61421), which means that our deprecation policy allows
us to drop it in release 5.2. Remove the code.
To repeat the rationale from the deprecation note:
- this virtual machine has no specification
- the Linux kernel dropped support for it 10 years ago
Users are recommended to use the Malta board instead.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20201102201311.2220005-1-f4bug@amsat.org>
In qos_build_main_args(), the pointer 'path' is dereferenced before
checking it is valid, which may lead to NULL pointer dereference.
So move the assignment to 'cmd_line' after checking 'path' is valid.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-Id: <5FA16ED5.4000203@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In ahci_exec() we attempt to permit the caller to pass a NULL pointer
for opts_in (in which case we use a default set of options). However
although we check for NULL when setting up the opts variable at the
top of the function, we unconditionally dereference opts_in at the
end of the function as part of freeing the opts->buffer.
Switch to checking whether the final buffer is the same as the
buffer we started with, instead of assuming the value we started
with is always opts_in->buffer.
At the moment all the callers pass a non-NULL opts argument, so
we never saw any crashes in practice.
Fixes: Coverity CID 1432302
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201103115257.23623-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In socket_accept() we use setsockopt() to set SO_RCVTIMEO,
but we don't check the return value for failure. Do so.
Fixes: Coverity CID 1432321
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201103115112.19211-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
https://bugs.launchpad.net/qemu/+bug/1878642
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201102163336.115444-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The randomness tests in the NPCM7xx RNG test fail intermittently
but fairly frequently. On my machine running the test in a loop:
while QTEST_QEMU_BINARY=./qemu-system-aarch64 ./tests/qtest/npcm7xx_rng-test; do true; done
will fail in less than a minute with an error like:
ERROR:../../tests/qtest/npcm7xx_rng-test.c:256:test_first_byte_runs:
assertion failed (calc_runs_p(buf.l, sizeof(buf) * BITS_PER_BYTE) > 0.01): (0.00286205989 > 0.01)
(Failures have been observed on all 4 of the randomness tests,
not just first_byte_runs.)
It's not clear why these tests are failing like this, but intermittent
failures make CI and merge testing awkward, so disable running them
unless a developer specifically sets QEMU_TEST_FLAKY_RNG_TESTS when
running the test suite, until we work out the cause.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201102152454.8287-1-peter.maydell@linaro.org
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
This test case uses a Tunlinkat request to remove a previously hard
linked file by using the 9pfs 'local' fs driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <9bec33a7d8f006ef8f80517985d0d6ac48650d53.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tlink request to create a hard link to a regular
file using the 9pfs 'local' fs driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <f0d869770ad23ee5ce10f7da90fdb742cadcad72.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tunlinkat request to remove a symlink using
the 9pfs 'local' fs driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <a23cd4d2ab6d8d3048addab8cbf0416fe5ead43e.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tsymlink 9p request to create a symbolic link using
the 9pfs 'local' fs driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <84ac76937855bf441242372cc3e62df42f0a3dc4.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tunlinkat request to remove a regular file using
the 9pfs 'local' fs driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <4eabeed7f662721dd5664cb77fe36ea0aa08b1ec.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tlcreate 9p request to create a regular file inside
host's test directory.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <269cae0c00af941a3a4ae78f1e319f93462a7eb4.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tunlinkat 9p request with flag AT_REMOVEDIR
(see 'man 2 unlink') to remove a directory from host's test directory.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <3c7c65b476ba44bea6afd0b378b5287e1c671a32.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Split out walking a directory path to a separate new utility function
do_walk() and use that function in do_mkdir().
The code difference saved this way is not much, but we'll use that new
do_walk() function in the upcoming patches, so it will avoid quite
some code duplication after all.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <4d7275b2363f122438a443ce079cbb355285e9d6.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
fs_mkdir() isn't a top level test function and thus shouldn't take
the "void *obj, void *data, QGuestAllocator *t_alloc" arguments.
Turn it into a helper to be used by test functions.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160321018148.266767.15959608711038504029.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
fs_readdir_split() isn't a top level test function and thus shouldn't
take the "void *obj, void *data, QGuestAllocator *t_alloc" arguments.
Turn it into a helper to be used by test functions.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160321016084.266767.9501523425012383531.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
fs_attach() is a top level test function. Factor out the reusable
code to a separate helper instead of hijacking it in other tests.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160321017450.266767.17377192504263871186.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
fs_create_dir() is a top level test function. It should set alloc.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160321016764.266767.3763279057643874020.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
fs_version() is a top level test function. Factor out the reusable
code to a separate helper instead of hijacking it in other tests.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160321015403.266767.4533967728943968456.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
No need to get a complaint from "rm" if some path disappeared for some
reason.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160406199444.312256.8319835906008559151.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Coverity wants the return value of mkdir() to be checked:
/qemu/tests/qtest/libqos/virtio-9p.c: 48 in create_local_test_dir()
42 /* Creates the directory for the 9pfs 'local' filesystem driver to
access. */
43 static void create_local_test_dir(void)
44 {
45 struct stat st;
46
47 g_assert(local_test_path != NULL);
>>> CID 1435963: Error handling issues (CHECKED_RETURN)
>>> Calling "mkdir(local_test_path, 511U)" without checking return value.
This library function may fail and return an error code.
48 mkdir(local_test_path, 0777);
49
50 /* ensure test directory exists now ... */
51 g_assert(stat(local_test_path, &st) == 0);
52 /* ... and is actually a directory */
53 g_assert((st.st_mode & S_IFMT) == S_IFDIR);
So let's just do that and log an info-level message at least, because we
actually only care if the required directory exists and we do have an
existence check for that in place already.
Reported-by: Coverity (CID 1435963)
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <03f68c7ec08064e20f43797f4eb4305ad21e1e8e.1604061839.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Use mkdtemp() to generate a unique directory for the 9p 'local' tests.
This fixes occasional 9p test failures when running 'make check -jN' if
QEMU was compiled for multiple target architectures, because the individual
architecture's test suites would run in parallel and interfere with each
other's data as the test directory was previously hard coded and hence the
same directory was used by all of them simultaniously.
This also requires a change how the test directory is created and deleted:
As the test path is now randomized and virtio_9p_register_nodes() being
called in a somewhat undeterministic way, that's no longer an appropriate
place to create and remove the test directory. Use a constructor and
destructor function for creating and removing the test directory instead.
Unfortunately libqos currently does not support setup/teardown callbacks
to handle this more cleanly.
The constructor functions needs to be in virtio-9p-test.c, not in
virtio-9p.c, because in the latter location it would cause all apps that
link to libqos (i.e. entirely unrelated test suites) to create a 9pfs
test directory as well, which would even break other test suites.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Message-Id: <7746f42d8f557593898d3d9d8e57c46e872dfb4f.1604243521.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Make functions create_local_test_dir() and remove_local_test_dir()
public. They're going to be used in the next patch.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <ec90703cbc23d6b612b3672f946d7741f4a16080.1604243521.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The NPCM7xx chips have multiple GPIO controllers that are mostly
identical except for some minor differences like the reset values of
some registers. Each controller controls up to 32 pins.
Each individual pin is modeled as a pair of unnamed GPIOs -- one for
emitting the actual pin state, and one for driving the pin externally.
Like the nRF51 GPIO controller, a gpio level may be negative, which
means the pin is not driven, or floating.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The RNG module returns a byte of randomness when the Data Valid bit is
set.
This implementation ignores the prescaler setting, and loads a new value
into RNGD every time RNGCS is read while the RNG is enabled and random
data is available.
A qtest featuring some simple randomness tests is included.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The watchdog is part of NPCM7XX's timer module. Its behavior is
controlled by the WTCR register in the timer.
When enabled, the watchdog issues an interrupt signal after a pre-set
amount of cycles, and issues a reset signal shortly after that.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: deleted blank line at end of npcm_watchdog_timer-test.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Another go at Peter's postcopy fixes
Cleanups from Bihong Yu and Peter Maydell.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=OL0Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201026a' into staging
migration pull: 2020-10-26
Another go at Peter's postcopy fixes
Cleanups from Bihong Yu and Peter Maydell.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 26 Oct 2020 16:17:03 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20201026a:
migration-test: Only hide error if !QTEST_LOG
migration/postcopy: Release fd before going into 'postcopy-pause'
migration: Sync requested pages after postcopy recovery
migration: Maintain postcopy faulted addresses
migration: Introduce migrate_send_rp_message_req_pages()
migration: Pass incoming state into qemu_ufd_copy_ioctl()
migration: using trace_ to replace DPRINTF
migration: Delete redundant spaces
migration: Open brace '{' following function declarations go on the next line
migration: Do not initialise statics and globals to 0 or NULL
migration: Add braces {} for if statement
migration: Open brace '{' following struct go on the same line
migration: Add spaces around operator
migration: Don't use '#' flag of printf format
migration: Do not use C99 // comments
migration: Drop unused VMSTATE_FLOAT64 support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The errors are very useful when debugging qtest failures, especially when
QTEST_LOG=1 is set. Let's allow override MigrateStart.hide_stderr when
QTEST_LOG=1 is specified, because that means the user wants to be verbose.
Not very nice to introduce the first QTEST_LOG env access in migration-test.c,
however it should be handy. Without this patch, I was hacking error_report()
when debugging such errors. Let's make things easier.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-7-peterx@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We call get_generic_fuzz_configs, which fills an array with
predefined {name, args, objects} triples. For each of these, we add a
new FuzzTarget, that uses a small wrapper to set
QEMU_FUZZ_{ARGS,OBJECTS} to the corresponding predefined values.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-16-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Predefine some generic-fuzz configs. For each of these, we will create a
separate FuzzTarget that can be selected through argv0 and, therefore,
fuzzed on oss-fuzz.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-15-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It can be useful to register FuzzTargets that have nearly-identical
initialization handlers (e.g. for using the same fuzzing code, with
different configuration options). Add an opaque pointer to the
FuzzTarget struct, so that FuzzTargets can hold some data, useful for
storing target-specific configuration options, that can be read by the
get_init_cmdline function.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-14-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-10-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This new operation is used in the next commit, which concatenates two
fuzzer-generated inputs. With this operation, we can prevent the second
input from clobbering the PCI configuration performed by the first.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-9-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
libfuzzer supports a "custom crossover function". Libfuzzer often tries
to blend two inputs to create a new interesting input. Sometimes, we
have a better idea about how to blend inputs together. This change
allows fuzzers to specify a custom function for blending two inputs
together.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-8-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When a virtual-device tries to access some buffer in memory over DMA, we
add call-backs into the fuzzer(next commit). The fuzzer checks verifies
that the DMA request maps to a physical RAM address and fills the memory
with fuzzer-provided data. The patterns that we use to fill this memory
are specified using add_dma_pattern and clear_dma_patterns operations.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-5-alxndr@bu.edu>
[thuth: Reformatted one comment according to the QEMU coding style]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch compares TYPE_PCI_DEVICE objects against the user-provided
matching pattern. If there is a match, we use some hacks and leverage
QOS to map each possible BAR for that device. Now fuzzed inputs might be
converted to pci_read/write commands which target specific. This means
that we can fuzz a particular device's PCI configuration space,
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-4-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This is a generic fuzzer designed to fuzz a virtual device's
MemoryRegions, as long as they exist within the Memory or Port IO (if it
exists) AddressSpaces. The fuzzer's input is interpreted into a sequence
of qtest commands (outb, readw, etc). The interpreted commands are
separated by a magic seaparator, which should be easy for the fuzzer to
guess. Without ASan, the separator can be specified as a "dictionary
value" using the -dict argument (see libFuzzer documentation).
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-3-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The g_list_remove_link doesn't free the link element,
opposed to what I thought.
Switch to g_list_delete_link that does free it.
Also refactor the code a bit.
Thanks for Max Reitz for helping me with this.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201019163702.471239-4-mlevitsk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
By a mistake I added the pending events in a wrong order.
Fix this by using g_list_append.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201019163702.471239-3-mlevitsk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This test won't work if qemu was compiled without CONFIG_NPCM7XX, as
pointed out by Thomas Huth on a different patch.
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-Id: <20201023210637.351238-2-hskinnemoen@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The qtests can be run directly by specifying the QEMU binary with the
QTEST_QEMU_BINARY environment variable, for example:
$ QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 tests/qtest/test-hmp
However, if you specify a binary without a path, for example with
QTEST_QEMU_BINARY=qemu-system-x86_64 if the QEMU binary is in your
$PATH, then the test currently simply crashes.
Let's try a little bit smarter here by looking for the final '-'
instead of the slash.
Message-Id: <20201012114816.43546-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
this fixes non-TCG builds broken recently by replay reverse debugging.
Stub the needed functions in stub/, splitting roughly between functions
needed only by system emulation, by system emulation and tools,
and by everyone. This includes duplicating some code in replay/, and
puts the logic for non-replay related events in the replay/ module (+
the stubs), so this should be revisited in the future.
Surprisingly, only _one_ qtest was affected by this, ide-test.c, which
resulted in a buzz as the bh events were never delivered, and the bh
never executed.
Many other subsystems _should_ have been affected.
This fixes the immediate issue, however a better way to group replay
functionality to TCG-only code could be developed in the long term.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20201013192123.22632-4-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
the tests assume TCG is available, thus breaking
for TCG-only tests, where only the TCG accelerator option
is passed to the QEMU binary.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20201013192123.22632-3-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Starting with meson 0.56, colons are used to separate the subproject name
from the test name. Use dash or slash depending on what looks nicer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test exercises the various modes of the npcm7xx timer. In
particular, it triggers the bug found by the fuzzer, as reported here:
https://lists.gnu.org/archive/html/qemu-devel/2020-09/msg02992.html
It also found several other bugs, especially related to interrupt
handling.
The test exercises all the timers in all the timer modules, which
expands to 180 test cases in total.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20201008232154.94221-2-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test case uses the 9pfs 'local' driver to create a directory
and then checks if the expected directory was actually created
(as real directory) on host side.
This patch introduces a custom split() implementation, because
the test code requires non empty array elements as result. For
that reason g_strsplit() would not be a good alternative, as
it would require additional filter code for reshuffling the
array, and the resulting code would be even more complex than
this split() function.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <be342f236842272275f65dbe05587f0a5409ad77.1602182956.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This new public function virtio_9p_test_path() allows 9pfs
'local' tests to translate a path from guest scope to host
scope. For instance by passing an empty string it would
return the root path on host of the exported 9pfs tree.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <b563d3c73c6391ec927a2622c9f65c09ca56bd83.1602182956.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Before running the first 9pfs test case, make sure the test directory
for running the 9pfs 'local' tests on is entirely empty. For that
reason simply delete the test directory (if any) before (re)creating
it on test suite startup.
Note: The preferable precise behaviour would be the test directory
only being wiped once *before* a test suite run. Right now the test
directory is also wiped at the *end* of a test suite run because
libqos is calling the virtio_9p_register_nodes() callback for some
reason also when a test suite completed. This is suboptimal as
developers cannot immediately see what files and directories the
9pfs local tests created precisely after the test suite completed.
But fortunately the test directory is not wiped if some test failed.
So it is probably not worth it drilling another hole into libqos
for this issue.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <b30776ea3289dc40dabc7d0063d825d21d9a65bf.1602182956.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This patch introduces 9pfs test cases using the 9pfs 'local'
filesystem driver which reads/writes/creates/deletes real files
and directories.
In this initial version, there is only one local test which actually
only checks if the 9pfs 'local' device was created successfully.
Before the 9pfs 'local' tests are run, a test directory 'qtest-9p-local'
is created (with world rwx permissions) under the current working
directory. At this point that test directory is not auto deleted yet.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <81fc4b3b6b6c9bf7999e79f5e7cbc364a5f09ddb.1602182956.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
All existing 9pfs test cases are using the 'synth' fs driver so far, which
means they are not accessing real files, but a purely simulated (in RAM
only) file system.
Let's make this clear by changing the prefix of the individual qtest case
names from 'fs/' to 'synth/'. That way they'll be easily distinguishable
from upcoming new 9pfs test cases supposed to be using a different fs
driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <e04e75acb849b085c6d6320b2433a15fa935bcff.1602182956.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Prior to this patch, the only way I found to terminate the fuzzer was
either to:
1. Explicitly specify the number of fuzzer runs with the -runs= flag
2. SIGKILL the process with "pkill -9 qemu-fuzz-*" or similar
In addition to being annoying to deal with, SIGKILLing the process skips
over any exit handlers(e.g. registered with atexit()). This is bad,
since some fuzzers might create temporary files that should ideally be
removed on exit using an exit handler. The only way to achieve a clean
exit now is to specify -runs=N , but the desired "N" is tricky to
identify prior to fuzzing.
Why doesn't the process exit with standard SIGINT,SIGHUP,SIGTERM
signals? QEMU installs its own handlers for these signals in
os-posix.c:os_setup_signal_handling, which notify the main loop that an
exit was requested. The fuzzer, however, does not run qemu_main_loop,
which performs the main_loop_should_exit() check. This means that the
fuzzer effectively ignores these signals. As we don't really care about
cleanly stopping the disposable fuzzer "VM", this patch uninstalls
QEMU's signal handlers. Thus, we can stop the fuzzer with
SIG{INT,HUP,TERM} and the fuzzing code can optionally use atexit() to
clean up temporary files/resources.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201014142157.46028-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
downtime in migration test, less verbose output when running w/o KVM)
* Improve handling of acceptance tests in the Gitlab-CI
* Run checkpatch.pl in the Gitlab-CI
* Improve the gitlab-pipeline-status script
* Misc patches (mark 'moxie' as deprecated, remove stale .gitignore files, ...)
-----BEGIN PGP SIGNATURE-----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=lCRK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-10-13' into staging
* qtest improvements (test for crash found with the fuzzer, increase
downtime in migration test, less verbose output when running w/o KVM)
* Improve handling of acceptance tests in the Gitlab-CI
* Run checkpatch.pl in the Gitlab-CI
* Improve the gitlab-pipeline-status script
* Misc patches (mark 'moxie' as deprecated, remove stale .gitignore files, ...)
# gpg: Signature made Tue 13 Oct 2020 11:49:06 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-10-13: (23 commits)
scripts/ci/gitlab-pipeline-status: wait for pipeline creation
scripts/ci/gitlab-pipeline-status: use more descriptive exceptions
scripts/ci/gitlab-pipeline-status: handle keyboard interrupts
scripts/ci/gitlab-pipeline-status: refactor parser creation
scripts/ci/gitlab-pipeline-status: give early feedback on running pipelines
scripts/ci/gitlab-pipeline-status: improve message regarding timeout
scripts/ci/gitlab-pipeline-status: make branch name configurable
gitlab: assign python helper files to GitLab maintainers section
gitlab: add a CI job to validate the DCO sign off
gitlab: add a CI job for running checkpatch.pl
configure: fixes indent of $meson setup
docs/system/deprecated: Mark the 'moxie' CPU as deprecated
Remove superfluous .gitignore files
MAINTAINERS: Ignore bios-tables-test in the qtest section
Add a comment in bios-tables-test.c to clarify the reason behind approach
softmmu/vl: Be less verbose about missing KVM when running the qtests
tests/migration: Allow longer timeouts
qtest: add fuzz test case
Acceptance tests: show test report on GitLab CI
Acceptance tests: do not show canceled test logs on GitLab CI
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A comment is added in bios-tables-test.c that explains the reasoning
behind the process of updating the ACPI table blobs when new tests are added
or old tests are modified or code is committed that affect tests. The
explanation would help future contributors follow the correct process when
making code changes that affect ACPI tables.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200929142501.1057-1-ani@anisinha.ca>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In travis, with gcov and gprof we're seeing timeouts; hopefully fix
this by increasing the test timeouts a bit, but for xbzrle ensure it
really does get a couple of cycles through to test the cache.
I think the problem in travis is we have about 2 host CPU threads,
in the test we have at least 3:
a) The vCPU thread (100% flat out)
b) The source migration thread
c) The destination migration thread
if (b) & (c) are slow for any reason - gcov+gperf or a slow host -
then they're sharing one host CPU thread so limit the migration
bandwidth.
Tested on my laptop with:
taskset -c 0,1 ./tests/qtest/migration-test -p /x86_64/migration
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201008160330.130431-1-dgilbert@redhat.com>
[thuth: Move the #define to the right location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently the device fuzzer finds more and more issues.
For every fuzz case, we need not only the fixes but also
the corresponding test case. We can analysis the reproducer
for every case and find what happened in where and write
a beautiful test case. However the raw data of reproducer is not
friendly to analysis. It will take a very long time, even far more
than the fixes itself. So let's create a new file to hold all of
the fuzz test cases and just use the raw data to act as the test
case. This way nobody will be afraid of writing a test case for
the fuzz reproducer.
This patch adds the issue LP#1878263 test case.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200921160605.19329-1-liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
[thuth: Slightly adjusted commit message, removed empty lines]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use self-explicit NANOSECONDS_PER_SECOND definition instead
of a magic value.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201011194918.3219195-5-f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test 067 from qemu-iotests is executing QMP commands to hotplug
and hot-unplug disks, devices and blockdevs. Because the power
of the text-based test harness is limited, it is actually limiting
the checks that it does, for example by skipping DEVICE_DELETED
events.
tests/qtest already has a similar test, drive_del-test.c.
We can merge them, and even reuse some of the existing code in
drive_del-test.c. This will improve the quality of the test by
covering DEVICE_DELETED events and testing multiple architectures
(therefore covering multiple PCI hotplug mechanisms as well as s390x
virtio-ccw).
The only difference is that the new test will always use null-co:// for
the medium rather than qcow2 or raw, but this should be irrelevant for
what the test is covering. For example there are no "qemu-img check"
runs in 067 that would check that the file is properly closed.
The new tests requires PCI hot-plug support, so drive_del-test
is moved from qemu-system-ppc to qemu-system-ppc64.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not just trust the HMP commands to create and delete the drive, use
query-block to check that this is actually the case.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let test use the new functionality for buffering events.
The only remaining users of qtest_qmp_receive_dict are tests
that fuzz the QMP protocol.
Tested with 'make check-qtest'.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201006123904.610658-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simplify the code now that events are buffered. There is no need
anymore to separate sending the command and retrieving the response.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The purpose of qtest_qmp_receive_success was mostly to process events
that arrived between the issueing of a command and the "return"
line from QMP. This is now handled by the buffering of events
that libqtest performs automatically.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
The new qtest_qmp_receive buffers all the received qmp events, allowing
qtest_qmp_eventwait_ref to return them.
This is intended to solve the race in regard to ordering of qmp events
vs qmp responses, as soon as the callers start using the new interface.
In addition to that, define qtest_qmp_event_ref a function which only scans
the buffer that qtest_qmp_receive stores the events to. This is intended
for callers that are only interested in events that were received during
the last call to the qtest_qmp_receive.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201006123904.610658-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the next patch a new version of qtest_qmp_receive will be
reintroduced that will buffer received qmp events for later
consumption in qtest_qmp_eventwait_ref
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the extra sources and extra dependencies of qtests are held
in two separate dictionaries. Use the same trick as tests/meson.build
to combine them into one. This will make it easier to update the
documentation for unit tests and qtests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We add the kvm-steal-time CPU property and implement it for machvirt.
A tiny bit of refactoring was also done to allow pmu and pvtime to
use the same vcpu device helper functions.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-7-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
arm-cpu-features got dropped from the AArch64 tests during the meson
conversion shuffle.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-6-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix corner cases in booting from ECKD
* s390x-ccw bios cleanup part 2
-----BEGIN PGP SIGNATURE-----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=T7wc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-10-06' into staging
* Don't stop at the first unbootable device, continue scanning
* Fix corner cases in booting from ECKD
* s390x-ccw bios cleanup part 2
# gpg: Signature made Tue 06 Oct 2020 19:17:46 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-10-06:
tests/qtest/cdrom: Add more s390x-related boot tests
pc-bios/s390: Update the s390-ccw bios binaries
pc-bios: s390x: Go into disabled wait when encountering a PGM exception
pc-bios: s390x: Use reset PSW if avaliable
pc-bios: s390x: Save PSW rework
pc-bios: s390x: Fix bootmap.c zipl component entry data handling
pc-bios/s390-ccw: break loop if a null block number is reached
pc-bios/s390-ccw: fix off-by-one error
pc-bios/s390-ccw/main: Remove superfluous call to enable_subchannel()
pc-bios/s390-ccw: Allow booting in case the first virtio-blk disk is bad
pc-bios/s390-ccw: Scan through all devices if no boot device specified
pc-bios/s390-ccw: Do not bail out early if not finding a SCSI disk
pc-bios/s390-ccw: Move the inner logic of find_subch() to a separate function
pc-bios/s390-ccw: Introduce ENODEV define and remove guards of others
pc-bios/s390-ccw: Move ipl-related code from main() into a separate function
pc-bios/s390-ccw/Makefile: Compile with -std=gnu99, -fwrapv and -fno-common
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's add two new tests:
1) Booting with "bootindex" is the architected default behavior on the
s390x target, so we should have at least one test that is using the
"bootindex" property.
2) The s390-ccw bios used to fail when other unbootable devices have
been specified before the bootable device (without "bootindex"). Now
that the s390-ccw bios is a little bit smarter here, we should test
this scenario, too, to avoid regressions.
Message-Id: <20200806105349.632-10-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
SLIRP uses Meson so it could become a subproject in the future,
but our choice of configure options is not yet supported in Meson
(https://github.com/mesonbuild/meson/pull/7740).
For now, build the library via the main meson.build just like for
capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libslirp.a, which we wouldn't
do before-hand.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't need to use kernel-irqchip=off for irq0 override if IRQ
routing is supported by the host, which is the case since 2009
(IRQ routing was added to KVM in Linux v2.6.30).
This is a more straightforward fix for Launchpad bug #1896263, as
it doesn't require increasing the complexity of the MSR code.
kernel-irqchip=off is for debugging only and there's no need to
increase the complexity of the code just to work around an issue
that was already fixed in the kernel.
Fixes: https://bugs.launchpad.net/bugs/1896263
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200922194732.2100510-1-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make things consistent with how softmmu/vl.c uses os_find_datadir.
Initializing the path to the executables will also be needed for
get_relocatable_path to work.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just return the directory without requiring the caller to free it.
This also removes a bogus check for NULL in os_find_datadir and
module_load_one; g_strdup of a static variable cannot return NULL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This does not have any effect on Meson's behavior itself, since "meson test"
always rebuilds everything (that is one reason why we are not using it...).
However, mtest2make can use this information to do a selective rebuild
for the requested suite.
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
... into new test_acpi_microvm_prepare helper
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-10-kraxel@redhat.com
This change adds a unit test to exercise the case when hotplug is disabled
both for pci root bus and the pci bridges by passing the following two
switches to qemu:
-global PIIX4_PM.acpi-root-pci-hotplug=off
-global PIIX4_PM.acpi-pci-hotplug-with-bridge-support=off
bios-tables-test-allowed-diff.h documents the fact that a new DSDT acpi gold
master binary blob we need to be added to test this. We will do the actual
addition in the next patch in the series.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200929123011.31836-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The last pull added a ton of useless files by mistake.
Drop them all.
Fixes: 0ed93f4c05 ("update golden master DSDT binary table blobs for q35")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the previously applied commit ("piix4: don't reserve hw resources when
hotplug is off globally"), we make changes to the ACPI DSDT tables
such that some ACPI code are not generated when bsel is absent. Since
as of this point in time, in q35 machines, we do not use bsel for pci
buses, we need to update the DSDT table blobs.
This patch updates the DSDT golden master tables for q35 machines.
At the same time, we clear bios-tables-test-allowed-diff.h for future
changes which update tables.
Following is a typical diff between the q35 acpi DSDT table blobs:
@@ -1,30 +1,30 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180105 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of tests/data/acpi/q35/DSDT, Tue Sep 15 18:52:47 2020
+ * Disassembly of /tmp/aml-3O0DR0, Tue Sep 15 18:52:47 2020
*
* Original Table Header:
* Signature "DSDT"
- * Length 0x00001DFE (7678)
+ * Length 0x00001DF6 (7670)
* Revision 0x01 **** 32-bit table (V1), no 64-bit math support
- * Checksum 0xAC
+ * Checksum 0x17
* OEM ID "BOCHS "
* OEM Table ID "BXPCDSDT"
* OEM Revision 0x00000001 (1)
* Compiler ID "BXPC"
* Compiler Version 0x00000001 (1)
*/
DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
{
Scope (\)
{
OperationRegion (DBG, SystemIO, 0x0402, One)
Field (DBG, ByteAcc, NoLock, Preserve)
{
DBGB, 8
}
@@ -3113,24 +3113,20 @@
Name (_ADR, 0x00010000) // _ADR: Address
Method (_S1D, 0, NotSerialized) // _S1D: S1 Device State
{
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
-
- Method (PCNT, 0, NotSerialized)
- {
- }
}
}
}
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-12-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following patch ("piix4: don't reserve hw resources when
hotplug is off globally") modifies certain ACPI tables for q35 machines.
This patch adds those table names to tests/qtest/bios-tables-test-allowed-diff.h
so that unit tests continue to pass and bisection is not broken.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-10-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change adds a new unit test for the global flag
'acpi-pci-hotplug-with-bridge-support' which is available for cold plugged pci
bridges in i440fx. The flag can be used to turn off ACPI based hotplug support
on all pci bridges.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-8-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The file 'tests/data/acpi/pc/DSDT.hpbridge' is a newly added acpi table file
for testing the pci bridge option 'acpi-pci-hotplug-with-bridge-support' under
i440fx. This change documents this fact.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-7-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ability to turn hotplug off on the pci root bus for i440fx was added in commit:
3d7e78aa77 ("Introduce a new flag for i440fx to disable PCI hotplug on the
root bus")
This change adds a unit test in order to test this feature.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A new binary acpi table tests/data/acpi/pc/DSDT.roothp is added in order to
unit test the feature flag that can disable/enable root pci bus hotplug on
i440fx. This feature was added with the commit:
3d7e78aa77 ("Introduce a new flag for i440fx to disable PCI hotplug on
the root bus")
This change documents the fact that this new file addition was made as a part
of the unit test change.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
here is diff against tests/data/acpi/q35/DSDT
for currently shipped ovmf binary.
(once firmware blob is updated, it will negotiate CPU hotplug
feature which will ad extra hunk sending SMI and Q35 tests will
need to be updated), but otherwise diff shows new CPU hotplug
AML that is shared between q35 and pc machines.
Method (CSCN, 0, Serialized)
{
Acquire (\_SB.PCI0.PRES.CPLK, 0xFFFF)
- Local0 = One
- While ((Local0 == One))
- {
- Local0 = Zero
- \_SB.PCI0.PRES.CCMD = Zero
- If ((\_SB.PCI0.PRES.CINS == One))
+ Name (CNEW, Package (0xFF){})
+ Local3 = Zero
+ Local4 = One
+ While ((Local4 == One))
+ {
+ Local4 = Zero
+ Local0 = One
+ Local1 = Zero
+ While (((Local0 == One) && (Local3 < One)))
{
- CTFY (\_SB.PCI0.PRES.CDAT, One)
- \_SB.PCI0.PRES.CINS = One
- Local0 = One
+ Local0 = Zero
+ \_SB.PCI0.PRES.CSEL = Local3
+ \_SB.PCI0.PRES.CCMD = Zero
+ If ((\_SB.PCI0.PRES.CDAT < Local3))
+ {
+ Break
+ }
+
+ If ((Local1 == 0xFF))
+ {
+ Local4 = One
+ Break
+ }
+
+ Local3 = \_SB.PCI0.PRES.CDAT
+ If ((\_SB.PCI0.PRES.CINS == One))
+ {
+ CNEW [Local1] = Local3
+ Local1++
+ Local0 = One
+ }
+ ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+ {
+ CTFY (Local3, 0x03)
+ \_SB.PCI0.PRES.CRMV = One
+ Local0 = One
+ }
+
+ Local3++
}
- ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+
+ Local2 = Zero
+ While ((Local2 < Local1))
{
- CTFY (\_SB.PCI0.PRES.CDAT, 0x03)
- \_SB.PCI0.PRES.CRMV = One
- Local0 = One
+ Local3 = DerefOf (CNEW [Local2])
+ CTFY (Local3, One)
+ Debug = Local3
+ \_SB.PCI0.PRES.CSEL = Local3
+ \_SB.PCI0.PRES.CINS = One
+ Local2++
}
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200923094650.1301166-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... to let tests pass until binary blobs are updated with new AML
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200923094650.1301166-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These were deprecated since 4.0, remove both HMP and QMP variants.
Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200915120403.1074579-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For now only vhost-user-net device is supported by the test. Other
vhost-user devices are not tested. As a first step make source code
refactoring so new devices can reuse the same test routines. To make
this provide a new vhost_user_ops structure with the methods to
initialize device, its command line or make a proper vhost-user
responses.
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <a48b60fb96fef230b75fff72a2d77040dcb5ef7c.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We simply want to ignore certain queries here, so let's rather
use the term 'ignore' to express this intention.
Message-Id: <20200914163755.42618-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Telling QTest to log to /dev/fd/2, essentially results in dup(2). This
is fine, if other code isn't logging to stderr. Otherwise, the order of
the logs is mixed due to buffering issues, since two file-descriptors
are used to write to the same file. We can avoid this, since just
specifying "-qtest" sets the log fd to stderr. If we want to disable
qtest logs, we can just add -qtest-log none.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200819061110.1320568-2-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On oss-fuzz, we must use the LIB_FUZZING_ENGINE and CFLAGS environment
variables, rather than -fsanitize=fuzzer. With this change, when
LIB_FUZZING_ENGINE is set, the --enable-fuzzing configure option will
use that environment variable during the linking stage, rather than
-fsanitize=fuzzer
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200902173652.307222-3-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With this change, the fuzzer-linker script should be specified outside
any --start-group/--end-group pairs. We need this on oss-fuzz, where
partially applying the linker-script results in a linker failure
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200902173652.307222-2-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add genh to the sources to avoid race conditions between QAPI
file generation and libqos compilation.
Make the name_suffix .fa for consistency with other link_whole
static libraries and to work around a Meson issue where
lots of linker flags are placed between -Wl,--start-group and
-Wl,--end-group and this breaks the fork-fuzz.ld linker script.
Reported-by: Claudio Fontana <cfontana@suse.de>
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is caught by "meson test", which complains about two tests with the
same name.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200904120342.11370-1-pbonzini@redhat.com>
Fixes: a2ce7dbd91 ("meson: convert tests/qtest to meson")
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qmp_assert_error_class() does more than just assert: it also unrefs
the @rsp argument. Rename to qmp_expect_error_and_unref() to reduce
confusion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200902115733.1229537-1-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix assert side-effect reported by Coverity:
/qemu/tests/qtest/ipmi-kcs-test.c: 84 in kcs_wait_obf()
83 while (IPMI_KCS_CMDREG_GET_OBF() == 0) {
>>> CID 1432368: Incorrect expression (ASSERT_SIDE_EFFECT)
>>> Argument "--count" of g_assert() has a side effect. The containing function might work differently in a non-debug build.
84 g_assert(--count != 0);
Reported-by: Coverity (CID 1432368)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200902080801.160652-2-philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The functions using these arrays expect a "const unsigned char *"
argument, it is safe to declare these as 'static const'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200902080909.161034-1-philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix an error handling issue reported by Coverity:
/qemu/tests/qtest/ahci-test.c: 1452 in prepare_iso()
1444 int fd = mkstemp(cdrom_path);
>>> CID 1432375: Error handling issues (NEGATIVE_RETURNS)
>>> "fd" is passed to a parameter that cannot be negative.
1452 ret = write(fd, patt, size);
Reported-by: Coverity (CID 1432375)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200902080552.159806-1-philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add smbios type 4 CPU speed check for we added new options to set
smbios type 4 "max speed" and "current speed". The default value
should be 2000 when no option is specified, just as the old version
did.
We add the test case to one machine of each architecture, though it
doesn't really run on aarch64 platform for smbios test can't run on
uefi only platform yet.
Signed-off-by: Ying Fang <fangying1@huawei.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Message-Id: <20200806035634.376-3-fangying1@huawei.com>
Move the create-config logic to meson.build; create a
configuration_data object and let meson handle the
quoting and output.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The binaries move to the root directory, e.g. qemu-system-i386 or
qemu-arm. This requires changes to qtests, CI, etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous, already existing 'basic' readdir test simply used a
'count' parameter big enough to retrieve all directory entries with a
single Treaddir request.
In the 3 new 'split' readdir tests added by this patch, directory
entries are retrieved, split over several Treaddir requests by picking
small 'count' parameters which force the server to truncate the
response. So the test client sends as many Treaddir requests as
necessary to get all directory entries.
The following 3 new tests are added (executed in this sequence):
1. Split readdir test with count=512
2. Split readdir test with count=256
3. Split readdir test with count=128
This test case sequence is chosen because the smaller the 'count' value,
the higher the chance of errors in case of implementation bugs on server
side.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <569b2e05ab1d0223b14a12dfbdf3ad5e8b3ac131.1596012787.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
We freed the string containing the final datadir path, but did not free
the path to the executable's directory that we get from
g_path_get_dirname(). Fix that.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200717163523.1591-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In the initial FuzzTarget, get_init_cmdline returned a char *. With this
API, we had no guarantee about where the string came from. For example,
i440fx-qtest-reboot-fuzz simply returned a pointer to a string literal,
while the QOS-based targets build the arguments out in a GString an
return the gchar *str pointer. Since we did not try to free the cmdline,
we have a leak for any targets that do not simply return string
literals. Clean up this mess by forcing fuzz-targets to return
a GString, that we can free.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200714174616.20709-1-alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Properly free each test response to avoid memory leak and separate
qtest_qmp() calls with spare lines, in a consistent manner.
Fixes: 5b88849e7b9("tests/qmp-cmd-test: Add qmp/object-add-failure-modes")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200715154117.15456-1-liq3ea@163.com>
Fixes: 9fc719b869 ("tests/qmp-cmd-test: Add qmp/object-add-duplicate-id")
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The TPM 2 code in libtpms was fixed to handle the PCR 'TCB group' according
to the PCClient profile. The change of the PCRs belonging to the 'TCB group'
now affects the pcrUpdateCounter in the TPM2_PCRRead() responses where its
value is now different (typically lower by '1') than what it was before. To
not fail the tests, we skip the comparison of the 14th byte, which
represents the pcrUpdateCounter.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200707201625.4177419-3-stefanb@linux.vnet.ibm.com
There should be a space between "forking" and "for".
Message-Id: <20200709083719.22221-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In 45222b9a90, I fixed a broken check for rcu_enable_atfork introduced
in d6919e4cb6. I added a call to rcu_enable_atfork after the
call to qemu_init in fuzz.c, but forgot to include the corresponding
header, breaking --enable-fuzzing --enable-werror builds.
Fixes: 45222b9a90 ("fuzz: fix broken qtest check at rcu_disable_atfork")
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200708200104.21978-3-alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- tests/vm support for aarch64 VMs
- tests/tcg better cross-compiler detection
- update docker tooling to support registries
- update docker support for xtensa
- gitlab build docker images and store in registry
- gitlab use docker images for builds
- a number of skipIf updates to support move
- linux-user MAP_FIXED_NOREPLACE fix
- qht-bench compiler tweaks
- configure fix for secret keyring
- tsan fiber annotation clean-up
- doc updates for mttcg/icount/gdbstub
- fix cirrus to use brew bash for iotests
- revert virtio-gpu breakage
- fix LC_ALL to avoid sorting changes in iotests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl8J0yoACgkQ+9DbCVqe
KkSzTAf/Vn+9TU8Qt7nZvl7W4tz7Sy5K8EJGwj2RXx6CWWWLiFbsXurIM8Krw5Vc
RmvUxwa359b+J0lQpfeNDHYm1nM8RZLFlkG0a5bl0I8sW0EcPjBRtwNaGKXh2p0u
u2RS2QAi6A9AvYT4ZREYlBM+o9WzbxCEQm4s8fr6WEJCQfxBnb5/bGiEjWR64e8C
j9Kvou+zAKfVizbQMtu+mwqjsoPtcS1b3vVcO7anhNuUsuaEKkS0dFWzWvw3lwJR
STIYnb8Y/eJ1yKr0hPH2qtWv3n6yhlYvYmpUCH6AwshGMUoeFEzR2VoWS6yZPGG6
na6XA3UW5R9AxIDfkCJ5ueeo8t9xMQ==
=HRWa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-110720-2' into staging
Testing and misc build updates:
- tests/vm support for aarch64 VMs
- tests/tcg better cross-compiler detection
- update docker tooling to support registries
- update docker support for xtensa
- gitlab build docker images and store in registry
- gitlab use docker images for builds
- a number of skipIf updates to support move
- linux-user MAP_FIXED_NOREPLACE fix
- qht-bench compiler tweaks
- configure fix for secret keyring
- tsan fiber annotation clean-up
- doc updates for mttcg/icount/gdbstub
- fix cirrus to use brew bash for iotests
- revert virtio-gpu breakage
- fix LC_ALL to avoid sorting changes in iotests
# gpg: Signature made Sat 11 Jul 2020 15:56:42 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-misc-110720-2: (50 commits)
iotests: Set LC_ALL=C for sort
Revert "vga: build virtio-gpu as module"
tests: fix "make check-qtest" for modular builds
.cirrus.yml: add bash to the brew packages
tests/docker: update toolchain set in debian-xtensa-cross
tests/docker: fall back more gracefully when pull fails
docs: Add to gdbstub documentation the PhyMemMode
docs/devel: add some notes on tcg-icount for developers
docs/devel: convert and update MTTCG design document
tests/qht-bench: Adjust threshold computation
tests/qht-bench: Adjust testing rate by -1
travis.yml: Test also the other targets on s390x
shippable: pull images from registry instead of building
testing: add check-build target
containers.yml: build with docker.py tooling
gitlab: limit re-builds of the containers
tests: improve performance of device-introspect-test
gitlab: add avocado asset caching
gitlab: enable check-tcg for linux-user tests
linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_va
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Michael started to work on the AVR port few years ago [*] and kept
improving the code over various series.
List of people who help him (in chronological order):
- Richard Henderson
- Sarah Harris and Edward Robbins
- Philippe Mathieu-Daudé and Aleksandar Markovic
- Pavel Dovgalyuk
- Thomas Huth
[*] The oldest contribution I could find on the list is from 2016:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html
Tests included:
$ avocado --show=app run -t arch:avr tests/acceptance/
Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos
(1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 2.35 s
$ make check-qtest-avr
TEST check-qtest-avr: tests/qtest/boot-serial-test
TEST check-qtest-avr: tests/qtest/cdrom-test
TEST check-qtest-avr: tests/qtest/device-introspect-test
TEST check-qtest-avr: tests/qtest/machine-none-test
TEST check-qtest-avr: tests/qtest/qmp-test
TEST check-qtest-avr: tests/qtest/qmp-cmd-test
TEST check-qtest-avr: tests/qtest/qom-test
TEST check-qtest-avr: tests/qtest/test-hmp
TEST check-qtest-avr: tests/qtest/qos-test
CI results:
. https://cirrus-ci.com/build/5697049146425344
. https://gitlab.com/philmd/qemu/-/pipelines/165328058
. https://travis-ci.org/github/philmd/qemu/builds/705817933
. https://app.shippable.com/github/philmd/qemu/runs/822/summary/console
-----BEGIN PGP SIGNATURE-----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=gFE5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/avr-port-20200711' into staging
8bit AVR port from Michael Rolnik.
Michael started to work on the AVR port few years ago [*] and kept
improving the code over various series.
List of people who help him (in chronological order):
- Richard Henderson
- Sarah Harris and Edward Robbins
- Philippe Mathieu-Daudé and Aleksandar Markovic
- Pavel Dovgalyuk
- Thomas Huth
[*] The oldest contribution I could find on the list is from 2016:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html
Tests included:
$ avocado --show=app run -t arch:avr tests/acceptance/
Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos
(1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 2.35 s
$ make check-qtest-avr
TEST check-qtest-avr: tests/qtest/boot-serial-test
TEST check-qtest-avr: tests/qtest/cdrom-test
TEST check-qtest-avr: tests/qtest/device-introspect-test
TEST check-qtest-avr: tests/qtest/machine-none-test
TEST check-qtest-avr: tests/qtest/qmp-test
TEST check-qtest-avr: tests/qtest/qmp-cmd-test
TEST check-qtest-avr: tests/qtest/qom-test
TEST check-qtest-avr: tests/qtest/test-hmp
TEST check-qtest-avr: tests/qtest/qos-test
CI results:
. https://cirrus-ci.com/build/5697049146425344
. https://gitlab.com/philmd/qemu/-/pipelines/165328058
. https://travis-ci.org/github/philmd/qemu/builds/705817933
. https://app.shippable.com/github/philmd/qemu/runs/822/summary/console
# gpg: Signature made Sat 11 Jul 2020 10:03:11 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/avr-port-20200711: (32 commits)
target/avr/disas: Fix store instructions display order
target/avr/cpu: Fix $PC displayed address
target/avr/cpu: Drop tlb_flush() in avr_cpu_reset()
target/avr: Add section into QEMU documentation
tests/acceptance: Test the Arduino MEGA2560 board
tests/boot-serial: Test some Arduino boards (AVR based)
hw/avr: Add limited support for some Arduino boards
hw/avr: Add some ATmega microcontrollers
hw/avr: Add support for loading ELF/raw binaries
hw/misc: avr: Add limited support for power reduction device
hw/timer: avr: Add limited support for 16-bit timer peripheral
hw/char: avr: Add limited support for USART peripheral
tests/machine-none: Add AVR support
target/avr: Register AVR support with the rest of QEMU
target/avr: Add support for disassembling via option '-d in_asm'
target/avr: Initialize TCG register variables
target/avr: Add instruction translation - CPU main translation function
target/avr: Add instruction translation - MCU Control Instructions
target/avr: Add instruction translation - Bit and Bit-test Instructions
target/avr: Add instruction translation - Data Transfer Instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Total execution time with "-m slow" and x86_64 QEMU, drops from 3
minutes 15 seconds, down to 54 seconds.
Individual tests drop from 17-20 seconds, down to 3-4 seconds.
The cost of this change is that any QOM bugs resulting in the test
failure will not be directly associated with the device that caused
the failure. The test case is not frequently identifying such bugs
though, and the cause is likely easily visible in the patch series
that causes the failure. So overall the shorter running time is
considered the more important factor.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Add the tree check to test_device_intro_none() and
test_device_intro_abstract(), too, just to be sure...]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200710060719.22386-1-thuth@redhat.com>
Print out 'T' through serial port.
The Arduino Duemilanove is based on a AVR5 CPU, while the
Arduino MEGA2560 on a AVR6 CPU.
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash Arduino adjustments from f4bug]
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-29-huth@tuxfamily.org>
Add a single code line that will automatically provide
'machine none' test.
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-28-huth@tuxfamily.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Merge the existing object-add test cases into a single test
functions and cover more failure cases.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200629193424.30280-4-eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This new test checks that attempting to create an object
with an existing ID gracefully fails.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200629193424.30280-3-eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have the same check in three places. Let's unify it in a central
place instead.
Message-Id: <20200622104339.21000-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We used shm_open with mmap to share libfuzzer's coverage bitmap with
child (runner) processes. The same functionality can be achieved with
MAP_SHARED | MAP_ANONYMOUS, since we do not care about naming or
permissioning the shared memory object.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200622165040.15121-1-alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The qtest_enabled check introduced in d6919e4 always returns false, as
it is called prior to configure_accelerators(). Instead of trying to
skip rcu_disable_atfork in qemu_main, simply call rcu_enable_atfork in
the fuzzer, after qemu_main returns.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200618160516.2817-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20200629140938.17566-3-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 93dd625f8b ("tests/acpi: update expected data files")
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20200629140938.17566-2-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 93dd625f8b ("tests/acpi: update expected data files")
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20200629140938.17566-2-drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 6d1da867e6 ("tests/migration: Reduce autoconverge initial bandwidth")
since that change makes unit tests much slower for all developers, while it's not
a robust way to fix migration tests. Migration tests need to find
a more robust way to discover a reasonable bandwidth without slowing
things down for everyone.
Fixes: 6d1da867e6 ("tests/migration: Reduce autoconverge initial bandwidth")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
QEMU incorrectly validates FEAT_SVM feature flags against
GET_SUPPORTED_CPUID even if SVM features are being masked out by
cpu_x86_cpuid(). This can make QEMU print warnings on most AMD
CPU models, even when SVM nesting is disabled (which is the
default).
This bug was never detected before because of a Linux KVM bug:
until Linux v5.6, KVM was not filtering out SVM features in
GET_SUPPORTED_CPUID when nested was disabled. This KVM bug was
fixed in Linux v5.7-rc1, on Linux commit a50718cc3f43 ("KVM:
nSVM: Expose SVM features to L1 iff nested is enabled").
Fix the problem by adding a CPUID_EXT3_SVM dependency to all
FEAT_SVM feature flags in the feature_dependencies table.
Reported-by: Yanan Fu <yfu@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200623230116.277409-1-ehabkost@redhat.com>
[Fix testcase. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The memory region ops have min_access_size == 4 so obey it.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The memory region ops have min_access_size == 4 so obey it.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Makes it easier to create good commit messages from the logs.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200619091905.21676-3-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200619091905.21676-2-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAl7x6OcACgkQda1lgCoL
QhFfbQf+MXBK1quIxEKW82Rdf3Eh/uKcAqWQ3IAd/wIHqK2fzB68PSroI7ETrwY1
z2oNtg50Wps43eaRjIJVNnEwU1yKGzDcSfjlnabDH7ZbtSx1VlSfGIiufxN6bh0A
bSBMMCPWlL2rNvQ8pI9B5fEqawjTnXn6GIAxDnYSH5wAIenKffmNC4tiN5hm8pTi
0BcsGSNiBb7BtsAokpMCrKAeASnlD1y11cFIlHmOrYOFs+m6uQ03BGu80A7P6fAa
ip93eW4g10bcBMaZhqgspALOgpEArSAg6Kg8Y9XiN9giJmdZXgRS/U1l9bkKSrXV
QGyaPsubLslMw3ZhO1vggoIxjAdwpA==
=Iew1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-06-23-1' into staging
Merge tpm 2020/06/23 v1
# gpg: Signature made Tue 23 Jun 2020 12:35:03 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2020-06-23-1:
tpm: Move backend code under the 'backends/' directory
hw/tpm: Make 'tpm_util.h' publicly accessible as "sysemu/tpm_util.h"
hw/tpm: Move DEFINE_PROP_TPMBE() macro to 'tmp_prop.h' local header
hw/tpm: Move few declarations from 'tpm_util.h' to 'tpm_int.h'
hw/tpm: Make TRACE_TPM_UTIL_SHOW_BUFFER check local to tpm_util.c
hw/tpm: Remove unnecessary 'tpm_int.h' header inclusion
hw/tpm: Move 'hw/acpi/tpm.h' inclusion from header to sources
hw/tpm: Include missing 'qemu/option.h' header
hw/tpm: Do not include 'qemu/osdep.h' in header
hw/tpm: Rename TPMDEV as TPM_BACKEND in Kconfig
backends: Add TPM files into their own directory
docs/specs/tpm: Correct header path name
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some cpu features may be enabled and disabled for all configurations
that support the feature. Let's test that.
A recent regression[*] inspired adding these tests.
[*] '-cpu host,pmu=on' caused a segfault
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200623090622.30365-2-philmd@redhat.com
Message-Id: <20200623082310.17577-1-drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
TPM subsytem is split into backends (see commit f4ede81eed)
and frontends (see i.e. 3676bc69b3). Keep the emulated
hardware 'frontends' under hw/tpm/, but move the backends
in the backends/tpm/ directory.
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200612085444.8362-13-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Disable a few tests under CONFIG_TSAN, which
run into a known TSan issue that results in a hang.
https://github.com/google/sanitizers/issues/1116
The disabled tests under TSan include all the qtests as well as
the test-char, test-qga, and test-qdev-global-props.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200609200738.445-14-robert.foley@linaro.org>
Message-Id: <20200612190237.30436-17-alex.bennee@linaro.org>
It's either "GNU *Library* General Public License version 2" or "GNU
Lesser General Public License version *2.1*", but there was no "version
2.0" of the "Lesser" license. So assume that version 2.1 is meant here.
Message-Id: <20200605100645.6506-1-thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200529221450.26673-3-alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The QTest server usually parses ASCII commands from clients. Since we
fuzz within the QEMU process, skip the QTest serialization and server
for most QTest commands. Leave the option to use the ASCII protocol, to
generate readable traces for crash reproducers.
Inspired-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200529221450.26673-2-alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When configure is run with "--disable-tpm", the bios-tables-test
q35/tis test fails with "-tpmdev: invalid option".
Skip the test if CONFIG_TPM is unset.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200615135051.2213-1-eric.auger@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Fixes: 5da7c35e25 ("bios-tables-test: Add Q35/TPM-TIS test")
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Enable MicroBlaze testing.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200416193303.23674-2-edgar.iglesias@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TPM2, DSDT tables were generated using
tests/data/acpi/rebuild-expected-aml.sh
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20200609125409.24179-6-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Test tables specific to the TPM-TIS instantiation.
The TPM2 is added in the framework. Also the DSDT
is updated with the TPM. The new function should be
be usable for CRB as well, later one.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200609125409.24179-5-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
bios-tables-test executes SeaBIOS. Indeed FW is needed to
fetch tables from QEMU and put them into the guest RAM. Also
the FW patches cross table pointers. At some point, SeaBIOS
ends up calling the TPM2_CC_HierarchyControl command with
TPM2_ST_SESSIONS tag, most probably steming from
tpm_set_failure/tpm20_hierarchycontrol SeaBIOS call path.
This causes an assert() in the qtest tpm emulation code.
As the goal here is not to boot SeaBIOS completely but just
let it grab the ACPI tables and consolidate them, let's just
remove the assert().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200609125409.24179-4-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add placeholders for TPM and DSDT reference tables for
Q35 TPM-TIS tests and ignore them for the time being.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200609125409.24179-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Include sockets and channel headers to that the header is
self-contained.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20200609125409.24179-2-eric.auger@redhat.com>
Update expected SRAT files for the change to account for NVDIMM NUMA
nodes in the SRAT.
AML diffs:
tests/data/acpi/pc/SRAT.dimmpxm:
Message-Id: <20200606000911.9896-4-vishal.l.verma@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In anticipation of a change to the SRAT generation in qemu, add the AML
file to diffs-allowed.
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Message-Id: <20200606000911.9896-2-vishal.l.verma@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Without this, the time since the last main-loop keeps increasing, as the
fuzzer runs. The forked children need to handle all the "past-due"
timers, slowing them down, over time. With this change, the
parent/fork-server process runs the main-loop, while waiting on the
child, ensuring that the timer events do not pile up, over time.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200512030133.29896-5-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Previously, we relied on "FuzzerTracePC*(.bss*)" to place libfuzzer's
fuzzer::TPC object into our contiguous shared-memory region. This does
not work for some libfuzzer builds, so this addition identifies the
region by its mangled name: *(.bss._ZN6fuzzer3TPCE);
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200512030133.29896-4-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200512030133.29896-3-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows us to keep pc-bios in executable_dir/pc-bios, rather than
executable_dir/../pc-bios, which is incompatible with oss-fuzz' file
structure.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200512030133.29896-2-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This started off as Andreas Färber's implementation from
March 2015, but after feedback from Paolo and Markus it morphed into
using the json output which handles structs reasonably.
Use with qom-list to find the members of an object.
(qemu) qom-get /backend/console[0]/device/vga.rom[0] size
65536
(qemu) qom-get /machine smm
"auto"
(qemu) qom-get /machine rtc-time
{
"tm_year": 120,
"tm_sec": 51,
"tm_hour": 9,
"tm_min": 50,
"tm_mon": 4,
"tm_mday": 20
}
(qemu) qom-get /machine frob
Error: Property '.frob' not found
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200520151108.160598-2-dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
migrate_get_socket_address() neglects to check
visit_type_SocketAddressList() failure. This smells like a leak, but
it actually will crash dereferencing @addrs. Pass &error_abort to
remove the code smell.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200505101908.6207-5-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We always miswrote the Fuloong machine... Fix its name.
Add an machine alias to the previous name for backward
compatibility.
Suggested-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-id: <20200526104726.11273-11-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Extract generic ioport_fuzz_qtest() method from
i440fx_fuzz_qtest(). This will help to write tests
not specific to the i440FX controller.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200514143433.18569-7-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Extract the generic pciconfig_fuzz_qos() method from
i440fx_fuzz_qos(). This will help to write tests not
specific to the i440FX controller.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200514143433.18569-6-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These typedefs are not used. Use a simple structure,
remote the typedefs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200514143433.18569-5-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200514143433.18569-4-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some devices availability depends on CONFIG options.
Use these options to only link tests when requested device
is available.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200514143433.18569-2-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
