Currently, If the setting of video mode failed, qemu will exit. It
should go back to the previous setting if the new screen resolution
failed. This patch fixes LP#1216368, add support to revert to existing
surface for the failure of video mode setting.
Reported-by: Sascha Krissler <sascha@srlabs.de>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1378285636-7091-1-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Stop/cont commands are broken with -icount due to a deadlock. The
real problem is that the computation of timers_state.cpu_ticks_offset
makes no sense with -icount enabled: we set it to an icount clock value
in cpu_disable_ticks, and subtract a TSC (or similar, whatever
cpu_get_real_ticks happens to return) value in cpu_enable_ticks.
The fix is simple. timers_state.cpu_ticks_offset is only used
together with cpu_get_real_ticks, so we can use cpu_get_real_ticks
in cpu_disable_ticks. There is no need to update cpu_ticks_prev
at the time cpu_disable_ticks is called; instead, we can do it
the next time cpu_get_ticks is called.
The change to cpu_disable_ticks is the important part of the patch.
The rest modifies the code to always check timers_state.cpu_ticks_prev,
even when the ticks are not advancing (i.e. the VM is stopped). It also
makes a similar change to cpu_get_clock_locked, so that the code remains
similar for cpu_get_ticks and cpu_get_clock_locked.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1382977938-13844-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
We currently just update the HMP NIC info when the last bit of macaddr
is written. This assumes that guest driver will write all the macaddr
from bit 0 to bit 5 when it changes the macaddr, this is the current
behavior of linux driver (e1000/rtl8139cp), but we can't do this
assumption.
The macaddr that is used for rx-filter will be updated when every bit
is changed. This patch updates the e1000/rtl8139 nic to update HMP NIC
info when every bit is changed. It will be same as virtio-net.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Message-id: 1383650238-16015-1-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
We delete without check whether it existed during exit. This will lead NULL
pointer deference since it was created conditionally depends on guest driver
status and features. So add a check of existence before trying to delete it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383728288-28469-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This was once introduced by commit 100d9891d6 but was never used in-tree
and then got broken by commit 32e0c8260d. Time to clean up.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 520B6A27.4040207@siemens.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
After calling dpy_gfx_replace_surface(s->con, surface), the outer
surface is invalid.
==5370== Invalid read of size 4
==5370== at 0x460229: surface_bits_per_pixel (console.h:250)
==5370== by 0x466A81: get_depth_index (vga.c:1173)
==5370== by 0x467EC2: vga_draw_graphic (vga.c:1718)
==5370== by 0x4687A5: vga_update_display (vga.c:1914)
==5370== by 0x2A782E: qxl_hw_update (qxl.c:1766)
==5370== by 0x3EB83B: graphic_hw_update (console.c:254)
==5370== by 0x3FBE31: qemu_spice_display_refresh (spice-display.c:418)
==5370== by 0x2A7D01: display_refresh (qxl.c:1886)
==5370== by 0x3EEE1C: dpy_refresh (console.c:1436)
==5370== by 0x3EB543: gui_update (console.c:192)
==5370== by 0x3C43B3: timerlist_run_timers (qemu-timer.c:488)
==5370== by 0x3C4416: qemu_clock_run_timers (qemu-timer.c:499)
==5370== Address 0x22ffb1e0 is 0 bytes inside a block of size 56 free'd
==5370== at 0x4A074C4: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==5370== by 0x4245FC: free_and_trace (vl.c:2771)
==5370== by 0x50899AE: g_free (gmem.c:252)
==5370== by 0x3EE8D3: qemu_free_displaysurface (console.c:1332)
==5370== by 0x3EEDB7: dpy_gfx_replace_surface (console.c:1427)
==5370== by 0x467EB6: vga_draw_graphic (vga.c:1714)
==5370== by 0x4687A5: vga_update_display (vga.c:1914)
==5370== by 0x2A782E: qxl_hw_update (qxl.c:1766)
==5370== by 0x3EB83B: graphic_hw_update (console.c:254)
==5370== by 0x3FBE31: qemu_spice_display_refresh (spice-display.c:418)
==5370== by 0x2A7D01: display_refresh (qxl.c:1886)
==5370== by 0x3EEE1C: dpy_refresh (console.c:1436)
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1383664554-15248-1-git-send-email-marcandre.lureau@gmail.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
On 32-bit hosts:
CC tests/test-opts-visitor.o
tests/test-opts-visitor.c: In function 'test_value':
tests/test-opts-visitor.c:128: warning: integer constant is too large for 'long' type
CC tests/test-bitops.o
tests/test-bitops.c:34: warning: integer constant is too large for 'long' type
tests/test-bitops.c:35: warning: integer constant is too large for 'long' type
tests/test-bitops.c:35: warning: integer constant is too large for 'long' type
CC tests/endianness-test.o
tests/endianness-test.c:47: warning: integer constant is too large for 'long' type
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1383669768-23926-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The documentation of how overlapping memory regions behave and how
the priority system works was rather brief, and confusion about
priorities seems to be quite common for developers trying to understand
how the memory region system works, so expand and clarify it.
This includes a worked example with overlaps, documentation of the
behaviour when an overlapped container has "holes", and mention
that it's valid for a region to have both MMIO callbacks and
subregions (and how this interacts with priorities when it does).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1381848154-31602-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This avoids needing to execute a program and keeping an (incomplete)
list when cross-compiling.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-id: 1372649418-4987-1-git-send-email-vapier@gentoo.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy cpu_to_32wu() with stl_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-10-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy cpu_to_be64wu() with stq_be_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-9-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy cpu_to_be32wu() with stl_be_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-8-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy cpu_to_be16wu() with stw_be_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-7-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy be32_to_cpupu() with ldl_be_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-6-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy le32_to_cpupu() with ldl_le_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-5-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy le16_to_cpupu() with lduw_le_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-4-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy cpu_to_le32wu() with stl_le_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy cpu_to_le16wu() with stw_le_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
* QTest coverage for all machines
* QOM realize for Milkymist UART
* QOM realize for ARM MPCore
* device_add bug fixes and cleanups
* QOM for PCMCIA/MicroDrive (last legacy IDE device)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=YzDu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'afaerber/tags/qom-devices-for-anthony' into staging
QOM device refactorings
* QTest coverage for all machines
* QOM realize for Milkymist UART
* QOM realize for ARM MPCore
* device_add bug fixes and cleanups
* QOM for PCMCIA/MicroDrive (last legacy IDE device)
# gpg: Signature made Tue 05 Nov 2013 09:07:03 AM PST using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber (49) and others
# Via Andreas Färber
* afaerber/tags/qom-devices-for-anthony: (54 commits)
pcmcia/pxa2xx: QOM'ify PXA2xxPCMCIAState
ide: Drop ide_init2_with_non_qdev_drives()
microdrive: Coding Style cleanups
pcmcia: QOM'ify PCMCIACardState and MicroDriveState
pxa: Fix typo "dettach"
qom: Fix pointer to int property helpers' documentation
qdev-monitor: Inline qdev_init() for device_add
qdev-monitor: Avoid qdev as variable name
qdev: Drop misleading qdev_free() function
qdev-monitor: Unref device when device_add fails
qdev-monitor: Fix crash when device_add is called with abstract driver
qdev-monitor: Clean up qdev_device_add() variable naming
arm11mpcore: Split off RealView MPCore
arm11mpcore: Prepare for QOM embedding
arm11mpcore: Convert mpcore_rirq_state to QOM realize
realview_gic: Prepare for QOM embedding
realview_gic: Convert to QOM realize
arm11mpcore: Convert ARM11MPCorePriveState to QOM realize
arm11mpcore: Split off SCU device
arm11mpcore: Create container MemoryRegion in instance_init
...
Turn it into a SysBusDevice and use a container MemoryRegion.
Add a link<pcmcia-card> property to the PCMCIACardState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Turn PCMCIACardState into a device.
Move callbacks to new PCMCIACardClass.
Derive TYPE_MICRODRIVE from TYPE_PCMCIA_CARD.
Replace ide_init2_with_non_qdev_drives().
Signed-off-by: Othmar Pasteka <pasteka@kabsi.at>
Signed-off-by: Andreas Färber <afaerber@suse.de>
For historic reasons, qdev_init() unparents the device on failure.
Inline this to make the error paths clearer and consistent.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Prepares for bringing error cleanup code into canonical QOM form.
Includes a whitespace removal after curly brace by Stefan.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The qdev_free() function name is misleading since all the function does
is unlink the device from its parent. The device is not necessarily
freed.
The device will be freed when its QObject refcount reaches zero. It is
usual for the parent (bus) to hold the final reference but there are
cases where something else holds a reference so "free" is a misleading
name.
Call object_unparent(obj) directly instead of having a qdev wrapper
function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
qdev_device_add() leaks the created device upon failure. I suspect this
problem crept in because qdev_free() unparents the device but does not
drop a reference - confusing name.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
User is able to crash running QEMU when following monitor
command is called:
device_add intel-hda-generic
Crash is caused by assertion in object_initialize_with_type()
when type is abstract.
Checking if type is abstract before instance is created in
qdev_device_add() allows to prevent crash on incorrect user input.
Cc: qemu-stable@nongnu.org
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Avoid confusion between object (obj) and object class (oc).
Tidy DeviceClass variable while at it (k -> dc).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move state struct, type constant and cast macro to a new header.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Embed ARM11MPCorePriveState and RealViewGICState and replace SysBus
initfn with realizefn.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move state struct, type constant and cast macro to a new header.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Embed GICState and replace SysBus initfn with realizefn.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Embed child devices and replace SysBus initfn with realizefn.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This allows to map the region directly after object initialization.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Turn SysBusDevice initfn into a QOM realizefn.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
This covers both emulated and KVM GIC.
Prepares for QOM realize.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
