PTE is not CODE so load it as normal DATA access.
Fixes: 074cfcb4da ("Implement hardware page table walker for MIPS32")
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240814090452.2591-4-philmd@linaro.org>
When refactoring page_table_walk_refill() in commit 4e999bf419
we missed the indirect call to cpu_mmu_index() in get_pte():
page_table_walk_refill()
-> get_pte()
-> cpu_ld[lq]_code()
-> cpu_mmu_index()
Since we don't mask anymore the modes in hflags, cpu_mmu_index()
can return UM or SM, while we only expect KM or ERL.
Fix by propagating ptw_mmu_idx to get_pte(), and use the
cpu_ld/st_code_mmu() API with the correct MemOpIdx.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reported-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2470
Fixes: 4e999bf419 ("target/mips: Pass ptw_mmu_idx down from mips_cpu_tlb_fill")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240814090452.2591-3-philmd@linaro.org>
In order to simplify the next commit, pass the PTE size as MemOp.
Rename:
native_shift -> native_op
directory_shift -> directory_mop
leaf_shift -> leaf_mop
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240814090452.2591-2-philmd@linaro.org>
Since the SEMIHOSTING feature is optional, we need
a stub to link when it is disabled.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-4-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-11-alex.bennee@linaro.org>
Since commit e1152f8166 ("target/mips: Remove helpers accessing
SAAR registers") this header is not needed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240529155216.5574-1-philmd@linaro.org>
Extract page-protection definitions from "exec/cpu-all.h"
to "exec/page-protection.h".
The list of files requiring the new header was generated
using:
$ git grep -wE \
'PAGE_(READ|WRITE|EXEC|RWX|VALID|ANON|RESERVED|TARGET_.|PASSTHROUGH)'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240427155714.53669-3-philmd@linaro.org>
Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-19-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
DisasContext::saar boolean is never set, so this code
is not reachable. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-9-philmd@linaro.org>
DisasContext::saar boolean is never set, so this code
is not reachable. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240209090513.9401-2-philmd@linaro.org>
Rather than adjust env->hflags so that the value computed
by cpu_mmu_index() changes, compute the mmu_idx that we
want directly and pass it down.
Introduce symbolic constants for MMU_{KERNEL,ERL}_IDX.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We already provide "hw/misc/mips_itu.h" to declare prototype
related to MIPSITUState. Move itc_reconfigure() declaration
there.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231009171443.12145-3-philmd@linaro.org>
"hw/mips/cpudevs.h" contains declarations which are specific
to the MIPS architecture; it doesn't make sense for these to
be called from a non-MIPS architecture. Move the declarations
to "target/mips/cpu.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231009171443.12145-2-philmd@linaro.org>
Add a check in 'softmmu-uaccess.h' that the header is only
include in system emulation, and rename it as 'uaccess.h'.
Rename the API methods:
- softmmu_[un]lock_user*() -> uaccess_[un]lock_user*()
- softmmu_strlen_user() -> uaccess_strlen_user().
Update a pair of comments.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-9-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This files only access the address_space_ld/st API, declared
in "exec/cpu-all.h", already included by "cpu.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-9-philmd@linaro.org>
"qemu/main-loop.h" declares functions related to QEMU's
main loop mutex, which these files don't access. Remove
the unused "qemu/main-loop.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-8-philmd@linaro.org>
These files don't use the CPU ld/st API, remove the unnecessary
"exec/cpu_ldst.h" header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230828221314.18435-7-philmd@linaro.org>
Coverity points out that in page_table_walk_refill() we can
shift by a negative number, which is undefined behaviour
(CID 1452918, 1452920, 1452922). We already catch the
negative directory_shift and leaf_shift as being a "bail
out early" case, but not until we've already used them to
calculated some offset values.
The shifts can be negative only if ptew > 1, so make the
bail-out-early check look directly at that, and only
calculate the shift amounts and the offsets based on them
after we have done that check. This allows
us to simplify the expressions used to calculate the
shift amounts, use an unsigned type, and avoids the
undefined behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
[PMD: Check for ptew > 1, use unsigned type]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230717213504.24777-3-philmd@linaro.org>
We already evaluated directory_shift and leaf_shift in
page_table_walk_refill(), no need to do that again: pass
as argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230717213504.24777-2-philmd@linaro.org>
Loongson introduced CSR instructions since 3A4000, which looks
similar to IOCSR and CPUCFG instructions we seen in LoongArch.
Unfortunately we don't have much document about those instructions,
bit fields of CPUCFG instructions and IOCSR registers can be found
at 3A4000's user manual, while instruction encodings can be found
at arch/mips/include/asm/mach-loongson64/loongson_regs.h from
Linux Kernel.
Our predefined CPUCFG bits are differ from actual 3A4000, since
we can't emulate all CPUCFG features present in 3A4000 for now,
we just enable bits for what we have in TCG.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20230521214832.20145-2-jiaxun.yang@flygoat.com>
[JY: Fixed typo in ase_lcsr_available(),
retrict GEN_FALSE_TRANS]
[PMD: Fix meson's mips_softmmu_ss -> mips_system_ss,
restrict AddressSpace/MemoryRegion to SysEmu]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Our GDB syscall support is the last chunk of code that needs target
specific support so move it to a new file. We take the opportunity to
move the syscall state into its own singleton instance and add in a
few helpers for the main gdbstub to interact with the module.
I also moved the gdb_exit() declaration into syscalls.h as it feels
pretty related and most of the callers of it treat it as such.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-22-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-22-richard.henderson@linaro.org>
These inline helpers are all used by target specific code so move them
out of the general header so we don't needlessly pollute the rest of
the API with target specific stuff.
Note we have to include cpu.h in semihosting as it was relying on a
side effect before.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-21-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-21-richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-20-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The availability of tb->pc will shortly be conditional.
Introduce accessor functions to minimize ifdefs.
Pass around a known pc to places like tcg_gen_code,
where the caller must already have the value.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Coverity notes that we forgot to check the error return from
lock_user() in one place in the handling of the UHI_plog semihosting
call. Add the missing error handling.
report_fault() is rather brutal in that it will call abort(), but
this is the same error-handling used in the rest of this file.
Resolves: Coverity CID 1490684
Fixes: ea4210600d ("target/mips: Avoid qemu_semihosting_log_out for UHI_plog")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220719191737.384744-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Delay generating the exception until after we know the
insn length, and record that length in env->error_code.
Fixes: 8ec7e3c53d ("target/mips: Use an exception for semihosting")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1126
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Inline these macros into the only two callers.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220628111701.677216-9-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
With semihosting_get_arg, we already have a check vs argc, so
there's no point replicating it -- just check the result vs NULL.
Merge copy_argn_to_target into its caller.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-8-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Always log the assert locally. Do not report_fault, but
instead include the fact of the fault in the assertion.
Don't bother freeing allocated strings before the abort().
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-6-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use semihost_sys_write and/or qemu_semihosting_console_write
for implementing plog. When using gdbstub, copy the temp
string below the stack so that gdb has a guest address from
which to perform the log.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-5-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This separates guest file descriptors from host file descriptors,
and utilizes shared infrastructure for integration with gdbstub.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-4-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We don't implement it with _WIN32 hosts, and the syscall
is missing from the gdb remote file i/o interface.
Since we can't implement it universally, drop it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The UHI specification does not have an EFAULT value,
and further specifies that "undefined UHI operations
should not return control to the target".
So, log the error and abort.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-2-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We don't implement it with _WIN32 hosts, and the syscalls
are missing from the gdb remote file i/o interface.
Since we can't implement them universally, drop them.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From the Unified Hosting Interface, MD01069 Reference Manual,
version 1.1.6, 06 July 2015.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Within do_interrupt, we hold the iothread lock, which
is required for Chardev access for the console, and for
the round trip for use_gdb_syscalls().
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have a subdirectory for semihosting; move this file out of exec.
Rename to emphasize the contents are a replacement for the functions
in linux-user/bsd-user uaccess.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
bit 31 (M) of WatchHiN register is a read-only register indicating
whether the next WatchHi register is present. It must not be reset
during user writes to the register.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@fungible.com>
Reviewed-by: David Daney <david.daney@fungible.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@fungible.com>
Message-Id: <20220511212953.74738-1-philmd@fungible.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Many files use "qemu/log.h" declarations but neglect to include
it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is
a core component and shouldn't be used that way. Move the
"qemu/log.h" inclusion locally to each unit requiring it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220207082756.82600-10-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-15-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Linking on Haiku OS fails:
/boot/system/develop/tools/bin/../lib/gcc/x86_64-unknown-haiku/8.3.0/../../../../x86_64-unknown-haiku/bin/ld:
error: libqemu-mips-softmmu.fa.p/target_mips_tcg_sysemu_mips-semi.c.o(.rodata) is too large (0xffff405a bytes)
/boot/system/develop/tools/bin/../lib/gcc/x86_64-unknown-haiku/8.3.0/../../../../x86_64-unknown-haiku/bin/ld:
final link failed: memory exhausted
collect2: error: ld returned 1 exit status
This is because the host_to_mips_errno[] uses errno as index,
for example:
static const uint16_t host_to_mips_errno[] = {
[ENAMETOOLONG] = 91,
...
and Haiku defines [*] ENAMETOOLONG as:
12 /* Error baselines */
13 #define B_GENERAL_ERROR_BASE INT_MIN
..
22 #define B_STORAGE_ERROR_BASE (B_GENERAL_ERROR_BASE + 0x6000)
...
106 #define B_NAME_TOO_LONG (B_STORAGE_ERROR_BASE + 4)
...
211 #define ENAMETOOLONG B_TO_POSIX_ERROR(B_NAME_TOO_LONG)
so the array ends up beeing indeed too big.
Since POSIX errno can't be use as indexes on Haiku,
rewrite errno_mips() using a switch statement.
[*] https://github.com/haiku/haiku/blob/r1beta3/headers/os/support/Errors.h#L130
Reported-by: Richard Zak <richard.j.zak@gmail.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210706130723.1178961-1-f4bug@amsat.org>
Keep host_to_mips_errno[] in .rodata by marking the array const.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-9-f4bug@amsat.org>
Use the BIT_ULL() macro to ensure we use 64-bit arithmetic.
This fixes the following Coverity issue (OVERFLOW_BEFORE_WIDEN):
CID 1452921: Integer handling issues:
Potentially overflowing expression "1 << w" with type "int"
(32 bits, signed) is evaluated using 32-bit arithmetic, and
then used in a context that expects an expression of type
"uint64_t" (64 bits, unsigned).
Fixes: 074cfcb4da ("target/mips: Implement hardware page table walker")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210505215119.1517465-1-f4bug@amsat.org>
Move helper_cache() to tcg/sysemu/special_helper.c.
The CACHE opcode is privileged and is not accessible in user
emulation. However we get a link failure when restricting the
symbol to sysemu. For now, add a stub helper to satisfy linking,
which abort if ever called.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-25-f4bug@amsat.org>